-
Notifications
You must be signed in to change notification settings - Fork 4.8k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Left IC2 Config error #12122
Comments
Hi @hermattt Can you check the camera privacy settings in Windows please to ensure that permission for applications to access the camera is set to On. Instructions for doing so can be found at #3381 (comment) |
If you are using a D410 depth module, please next check that the interposer (the floppy cable or rigid board that joins the Vision Processor D4 and Depth Module together) is fully seated in the 50-pin connectors and is not only partially inserted. |
It is fully seated. (Reconnected, no difference) |
Are you using a flexible cable interposer? If you are, did you create the cable yourself or are you using a pre-made commercial one like the one in the link below from the RealSense Store? https://store.intelrealsense.com/buy-hsf50-flexi-interposer-cable.html Have you installed the full RealSense SDK with the Intel.RealSense.SDK-WIN10 installer program that places a launch shortcut for the Viewer on the Windows desktop? Or are you using the Intel.RealSense.Viewer.exe version of the Viewer? If you have the full SDK installed, have you tried launching the rs-hello-realsense.exe example in the SDK's Tools folder to see whether the camera is capable of streaming depth at all? |
What is the product in the picture above, please? Is it a RealSense D415 camera that has been opened and its camera board disconnected? |
Not connected middle flex cable is for color sensor, but it works fine. |
Thanks very much for the confirmation that it is an opened-up Kinova Gen 3 with a D410 depth module. The information listing in the Viewer looks fine. Kinova Gen 3 can work with the RealSense SDK, as demonstrated by the case at #11993 and your own experiences with the Viewer. Intel are unable to provide technical support though for products not manufactured by Intel that incorporate RealSense technology, unfortunately. The proper place to seek support for such products will be the manufacturer, which in this instance is Kinova. https://www.kinovarobotics.com/reach-us/customer-support It looks as though the Intel firmware driver enables the Vision Processor and D410 camera boards to be recognized by Intel software such as the Viewer. It likely would not recognize the particular Omnivision RGB sensor that Kinova are using as it is a different Omnivision OV5640 component from the Omnivision sensors used for RGB by Intel-made RealSense cameras, which is why the firmware likely identifies it as D410 (depth and infrared streams only, no RGB stream). In summary, Intel cannot provide replacement components if there is a hardware fault because it is a Kinova product. Kinova might not replace the parts because if the Kinova was still within its sales warranty period then opening it up would have likely invalidated the warranty. I would recommend reconnecting the D410 board to the interposer cable and then trying to run a calibration of the sensors to see if it clears the problem that you are experiencing (though the calibration will probably fail if streaming cannot be started). If that does not work then purchasing replacement Vision Processor D4 V1 / RealSense D410 boards might be the only solution. I think that the problem is more likely to be with the D410 board than the Vision Processor D4, as there is not an apparent problem with accessing the camera details stored on the D4. |
Hi @hermattt Do you have an update about this case that you can provide, please? Thanks! |
There is not a fully annoted diagram available of the components on the D4 V1 board. The main components of the V1 though will be the D4 chip, an EEPROM flash memory component for storing the camera firmware driver, the USB components and an Image Signal Processor (ISP) chip for handling color data processing. |
There is not an available diagram that identifies those parts, unfortunately. |
Issue Description
Hi, I previously used Intel RealSense Viewer, but recently it stopped working.
Error in console:
When turning on streaming there is "No Frames Received" info.
Updating the firmware didn't help, When trying "Hardware Reset", console shows:
The text was updated successfully, but these errors were encountered: