You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I thought it was my sonoff-dongle that was done, so bought a new one, but problem percists, All of my friendlynames in zigbee2mqqt configfile and frontend are dead, and no buttons work anymore and automations are dead. However, in the MQQT-database all friendly names are there.
When I accesses devices under mqqt they are "unavailable", but when I try and control the devices through z2m frontend they do respond under exposes.
I have spent now 4 hours with ChatGPT and I am getting absolutely mental.
I have not touched one single setting, but DO have updated both. When I try and restore old backups, both mqqt and zig2m I get same problem.
HEEEEEEEEEEEEEEEELP!
PS, I have also tried and totally delete all db and delete the add-on and then replace all old ones.
When zigbee2mqqt is running, I get this text:
Use your ZigBee devices without the vendor's bridge or gateway.
Visit the Zigbee2MQTT page for more details.
But as said, it is found fine under Hardware, as well as I can still control devices, but only under exposes.
What happened?
I thought it was my sonoff-dongle that was done, so bought a new one, but problem percists, All of my friendlynames in zigbee2mqqt configfile and frontend are dead, and no buttons work anymore and automations are dead. However, in the MQQT-database all friendly names are there.
When I accesses devices under mqqt they are "unavailable", but when I try and control the devices through z2m frontend they do respond under exposes.
I have spent now 4 hours with ChatGPT and I am getting absolutely mental.
I have not touched one single setting, but DO have updated both. When I try and restore old backups, both mqqt and zig2m I get same problem.
HEEEEEEEEEEEEEEEELP!
PS, I have also tried and totally delete all db and delete the add-on and then replace all old ones.
When zigbee2mqqt is running, I get this text:
Use your ZigBee devices without the vendor's bridge or gateway.
Visit the Zigbee2MQTT page for more details.
But as said, it is found fine under Hardware, as well as I can still control devices, but only under exposes.
These are my settings in option:
data_path: /config/zigbee2mqtt
socat:
enabled: false
master: pty,raw,echo=0,link=/tmp/ttyZ2M,mode=777
slave: tcp-listen:8485,keepalive,nodelay,reuseaddr,keepidle=1,keepintvl=1,keepcnt=5
options: "-d -d"
log: false
mqtt:
active: false
folder: mosquitto
serial:
port: >-
/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_067a144759c9eb1198f08f4f1d69213e-if00-port0
What did you expect to happen?
No response
How to reproduce it (minimal and precise)
No response
Zigbee2MQTT version
2.0.0-2
Adapter firmware version
ea60
Adapter
Sonoff_Zigbee_3.0_USB_Dongle_Plus
Setup
Rasp pi 4 with mosquito running
Debug log
No response
The text was updated successfully, but these errors were encountered: