lolMiner 1.47

[Lolliedieb]

lolMiner 1.47

Note: at the moment the release is Linux only, because testing the new scheme on Windows will take us some time. Be patient please :)

Changes

• lolMiner bringing you the fastest public Ethash LHR solver! 77.2 - 78.2% on GDDR6 and 76 - 77% on GDDR6X Nvidia Ampere cards! Exceptions: 86% on RTX 3060 v1 with driver 460.39 or older, 55-58% on RTX 3500 and RTX 3800 12G. Fee on the new scheme is 1%, other solvers are unchanged. Please read the important notes section below.
• Added support for LHR unlock in 470.103.01 and all 510.x drivers. In fact we highly recommend using these drivers, because it will give a more stable unlocker experience!
• the parameter --lhrtune now takes absolute % values to fix a certain percentage of unlocking. If chosen too high, lolMiner will reduce the value to the maximum possible. The value will be tied to keep regardless of the number of locks this implies. The default is "auto" in which the miner tries to balance the number of locks and re-calibrations with the speed to achieve, hash rate might change from time to time based on unlock quality heuristics.
• Cheaper locks: when unlocking the miner will continue mining at low speed to make the unlock procedure more cheap.
• Reduced Ton & Alephium fee in Eth+Ton / Ethash+Alephium dual mining to 0%. You will be only paying the 1% fee on Ethash in this dual mining. This also means: no more unsafe connections to Ton servers to collect fee in case you are in a country with mining restrictions - if your own Ton connection is using Stratum over TLS.
• New parameter --silence that controls the amount of information the miner will print during its work. 0 is the default behavior, 1 will turn off "new job" messages, 2 will additionally turn of the messages about found shares, 3 will leave the miner with the minute statistics only.
• Added Nvidia memory junction temperature readings on cards that support this, e.g. GDDR6X customer GPUs, most professional and server GPUs and so on.

Fixes

• Fixed a bug with dual mining on LHR cards where the dual algorithm was mined with reduced rate after Ethash epoch change.
• Fixed a bug with --compactaccept not showing the * sign on short statistics.

Important notes about the new LHR unlocker scheme

• Use 470.103.01 or 510.x drivers! They have turned out to be much more stable in unlock in testing then older drivers.
• The miner software needs to learn certain aspects about your cards over time to optimize for the best balanced pool hash rate. The needed calibration will get better over time, but the things learned are too complex to display them or store into parameters.
• Therefore in automatic mode the miner might start with a slightly slower hash rate at the beginning, but will get better over time. In non-automatic mode you might see more re-calibrations during the first hour of mining then normal. If the number keeps too high after that point, lower the requested % value.
• As a consequence: the longer you can keep it running the better - avoid frequent restarts of the software.
• Dual mining with Aleph & Ton is supported as well as doing ZIL dual mining. When doing ZIL make sure --enablezilcache is used on all the LHR cards, because the re-calibration is needed on every hard epoch change.
• Try to keep your settings as stable es possible. Especially: Set clocks that your GPUs can keep without running into thermal throttling. Also use locked clock core with no set power limit to maintain a stable GPU core clock for ideal results. Having GPUs freely changing their clocks and sometimes running into their power limit will invalidate a lot of data collected and decrease efficiency of the unlocker a lot. Same applies to memory clock - do not change it after the calibration did start. Use --lhrwait parameter to delay the initial calibration until you are done with your settings.
• The initial configuration takes approx 3-4 minutes from the moment the DAG was build.
• Keep away other work load from your GPU as e.g. connected screens. Also CPU mining in parallel to the new unlocker is untested and might give unexpected results.

---

This discussion was created from the release lolMiner 1.47.

[nirotub]

Will be the Windows version? And what drivers are recommended for it?

[r0ver2]

There will be a Windows version - but we dont have any idea about what drivers will be recommended just yet!

[nbnslider]

will test

[ovan-mining87]

just install this 1.47 version on hiveOS but stil get low Hash , actually not unlocked
even using 470.103.01 driver

[r0ver2]

Make sure you let the miner run for 5-10 minutes, to get the tuning right - then you should get proper hashrate!

[ArianHiwa]

How can install 1.47 in hive? what command can be used? thanks

[ArianHiwa]

thanks

[ovan-mining87]

thanks

ok please tell me if its working fine in your rig.

[axsrza]

thanks bro, my 3 rtx3060lhr 38,5 mhs GREAT!
470.103.01 driver

[ovan-mining87]

thanks bro, my 3 rtx3060lhr 38,5 mhs GREAT! 470.103.01 driver

nice.. can you tell me your oc setting ? bcause mine only get to 37

[17785123713]

可以正常工作

[alex-bpc]

3060tiLHR hynix 42.5mh/s;1.6Gh/s -----> 46.8mh/s;1.4Gh/s core/mem/pl 1500/2400/190
3070ti micron 55.8mh/s;1.7Gh/s ------> 60.6mh/s;1.7Gh/s core/mem/pl 1500/2500/250
(hive OS)
driver 495.46
The guys are great fellows! They raised the acceleration, and my mood!

[mamafunny]

watt?

[Heivor]

When version for Windows?

[r0ver2]

Its work in progress - will come as soon as its ready!

[sweethome81]

asus tuf rtx 3070 ti ''need to re-calibrate unlocker. Doing so..''

driver 470.103.01
HiveOS

[r0ver2]

Since its GPU0, make sure its not "active", like a monitor or HDMI dummy are plugged in. Also check your BIOS settings, I had similiar issues with a 3060Ti as GPU0 - that was solved by updating the motherboards bios and fixing the bios settings! Good luck!

[sweethome81]

I lowered the oc settings, 62 mhs works stable

[Ninety8carrots]

@r0ver2 - I am having the same issues with 3060Ti at GPU0 location. Can you give more details on how you solved the issue? Also, would simply swapping with a non-3060Ti gpu solve the problem?

[r0ver2]

@r0ver2 - I am having the same issues with 3060Ti at GPU0 location. Can you give more details on how you solved the issue? Also, would simply swapping with a non-3060Ti gpu solve the problem?

Make sure iCPU are used a primary cpu, not sure if it makes any difference, by try set pcie gen to 2. Update bios of motherboard if there are a bios available.

[Psyxopath]

At the start, these are the errors. Why?

[r0ver2]

Defect DAG segments are normally because of too aggresive memory oc. Try reduce your memory overclock :-)

[amankhan25]

Super cool... Thank you lolminer

Previously on 3070lhr giving eth only 45 with ton but now 48

[eric8702]

Good! 3060 v1 on hive os ,how is the hashrate with 1.47 lolMiner?
and the setting Core, mem PL
Thank!

[shumway66]

iam getting 42mh roughly seems about same with ton or not

with driver 480.39

[eric8702]

iam getting 42mh roughly seems about same with ton or not with driver 480.39

in win10, my 3060 v1 has 48-49 hashrate in ETH mine. 47-48 eth hashrate and 1G ton hashrate in ETH&TON .
Run in the hive os,3060 V1 have 48 hashrate,just ETH mine?
Thank you

[r0ver2]

3060v1 can run fully unlocked in Windows if you use the 470.05 dev drivers - there are no such driver available for Linux.

[eric8702]

3060v1 can run fully unlocked in Windows if you use the 470.05 dev drivers - there are no such driver available for Linux.

Thanks for reply.

[nerti001]

''need to re-calibrate unlocker. Doing so..'' my hashrate before update was about 34MH and now it is at 15MH. What's the problem here?

[eric8702]

3060 v1 or v2?

[eric8702]

try to lower mem oc

[nerti001]

These are my cards I have here.

[nerti001]

try to lower mem oc

Now I have it at 2400, which is optimal rate you thinking?

[msarlak]

Set core clock to 1552 and memory clock to 2600 but leave the power limit empty

[Gamay1]

Здравствуйте RaveOs и новый lol это котастрофа, подскажите как быть?

Хеш рейт идёт на две монеты.

Тут 00000
Настроил правильно

И вот тоже глюк

Показывает 000 по хешрейту но он идёт

[akifhatipoglu]

Is there anyone try Rtx 3080 12GB performance?

[akifhatipoglu]

Thank you for the detailed answer. Can an increase in the LHR rate be observed in the next versions? Something like over the '70s. I don't understand why the 12GB version of 3080 gives low mhs.

[r0ver2]

No, thats not likly. Only ETH+TON (Dual Mode) will increase. The 3080 12GB got "LHRv3", same as 3050, and dont have the same semi-unlock possibilities as the earlier versions, like 3080 10GB.

[akifhatipoglu]

Thank you very much for giving such detailed information. I'm just curious as I'm new to these things. In general, Is LHRv3 hard to crack or did nvidia make it unbreakable now? Or is it a very long process?

[r0ver2]

No idea what will be possible with LHRv3 in the future, but it looks much harder to get decent performance from it!

[ovan-mining87]

Is there anyone try Rtx 3080 12GB performance?

LHR v3 like 3050 up to 53% performance

[Juriyx]

Hi. I have an RTX 3060 v1 and set the parameter --lhrtune 86.0 but it seems that the miner doesn't accept it and still auto-tune the GPU.
How can I set it correctly?

[r0ver2]

https://hashrate.no/3060#ETH got some OC and hashrate examples

[eric8702]

if 86% unlock worked,how much hashrate will be?

41,03 MH/s but I use not the highest overclock, +1750 MHz

Run in win10 ,it has 48-49 hashrate，120w power 2400 memory oc

[jaazza]

The miner still needs do to some tuning, but it will try to go directly to 86% unlock - so the tuning should take some less time with --lhrtune specified.

I can't seem to get it running consistently. Possible for you to post your flight sheet?

[ovan-mining87]

V1 must use 460.39 driver or older in hiveos

The miner still needs do to some tuning, but it will try to go directly to 86% unlock - so the tuning should take some less time with --lhrtune specified.

[LulaSvob]

same problem here. In the instructions it says that --lhrtune range is +/-40 but then on the screen I get LHR Pct 77.2, so I have no idea what to expect and how to set this parameter. Can anyone please help if you had any success?

[mpioner]

Please implement the functionality, restoring overclocking settings to default values after the miner shuts down.

[rtpraul]

How to set OC in batch file on windows? Like on T-Rex or Gminer.

Here for lolminer I just see the option fore core clock:

--cclk arg (=) | The core clock used for the GPUs. Cards are separated with a comma. "" can be used to skip a card.

So how to specify memory clock, fan speed, PL and lock core clock on windows?

[SoulRipper888]

Totally agree with that. Afterburner is trash, would be great to be able to tune core / mem / pl directly in lolminer.

[telethrasher]

thank you, thank you, thank you....

forgot to mention - the first card is a zotac3060tiLHR and it's having hot memory problems - need to change the pads... the next 4 are 3060tiLHR 3hynix 1samsung and the 6th card is an RX6700xt

good job on the solver !!!

[aluciano34]

Hola tengo 4 tarjetas. 3060 ti de Hynix, una 2060 y una 1660ti. Estaban funcionando correctamente, pero he actualizado la nueva versión, (0.6-213@220325 current) y mineria dual. Desde que lo he realizado, las tarjetas 3060 ti están inestables y varían su velocidad constantemente (de 11 Mhs a 37 Mhs). Cuando abro el Hive Shell , me marca este error_****### GPU 5: need to re-calibrate unlocker. Doing so..._
Alguien sabe que puedo hacer, he cambiado los overclooks muchas, muchas veces, pero no consigo que se estabilice.

Gracias

[JuanCruzLopezz]

Cada vez que cambies el overclock es recomendable, por lo menos en la versión 1.47, que reinicies por completo el rig para que se apliquen bien y el minero pueda calibrar la GPU. Si no llega a funcionar lo mas recomendable es que vuelvas a la versión 1.46a.

Saludos

[mth-1012]

Hey there. I'm switching a 3060v1 from Windows where I can do 50MH/s to my HiveOS rig. The miner doesn't seem to "recognize" this is a V1 card and the LHR unlocker is stuck at 77 constantly. Tried --lhrtune 86 for that specific card but always gets the warning that lhr param is too high. Running on a 1x riser btw. Any ways to make it 86% as you claim? THanks!

[mth-1012]

Have you tried 86.0 instead of 86?

yea. nothing changed...

[ovan-mining87]

for v1 card use 460.39 driver

[shumway66]

for v1 card use 460.39 driver

Or older any newer wont work

[mth-1012]

hey there, thanks. i just realized i'm running 470.94. i'm willing to downgrade it to 460.39 but would it recognize (and mine with) my 3070 Ti? i checked the supported device list for 460.39, there's no 3070ti

[ovan-mining87]

460.39 wont work on mixed config.
me too use mixed config v1 with other v2 and forced to use driver other than 460.39
460.39 only dtec v1 if booting

[liaozhijie]

Have a mini BUG:

If i use GOST or SOFT ROUTER，my pool address is 127.0.0.1:xxxx and 127.0.0.1:XXXX (dual mine)，but lolminer can't connect when use dual_mine_eth_ton.bat，need open two .bat file（open eth.bat and ton.bat at the same time）
trexmienr and gminer work well，hope can fix it.
Thanks you.

[liaozhijie]

Have a mini BUG:

If i use GOST or SOFT ROUTER，my pool address is 127.0.0.1:xxxx and 127.0.0.1:XXXX (dual mine)，but lolminer can't connect when use dual_mine_eth_ton.bat，need open two .bat file（open eth.bat and ton.bat at the same time）
trexmienr and gminer work well，hope can fix it.
Thanks you.

[byramses]

For windows version though it is in beta please add a download link, I can't wait.

[JuanCruzLopezz]

Hi, I'm having problems with dual mining. One (3060 LHR) of my 8 GPUs (7 3060 LHR; 1 3060TI LHR) is not mining TON COIN at full capacity as can be seen in the attached image (GPU number 7 at 36.74Mh/s ETH - 724.98Mh/s TON ) while the other GPUs do. This problem only happens when the version of lolminer is 1.47 and always with the same GPU no matter how long it is running. The console confirms the calibration of all GPUs equally and at the same time, but then does not report any problems with that GPU.
The only solution I find so far is not to update to version 1.47, and stay on 1.46a.

Greetings.

[ovan-mining87]

well wait for new bug fix then

[zennan83]

Guys I'm having issue with my 3060 lhr on 1.46a window version. It keep hitting mining lock no matter which setting I tweak using afterburner. Core lock from +100 to -200, memory clock from +1000 to 1200 all the same. Anyone can help? thanks a lot.

[ovan-mining87]

dont use afterburner for set CC and MC edit in bat file

[zennan83]

Which bat file to edit? Not good in script writing... mind to teach how? now using Tonwhales dual mining.

[andrey-shostik]

Which bat file to edit? Not good in script writing... mind to teach how? now using Tonwhales dual mining.

Nvidia inspector bat file I guess

[telethrasher]

i use nvidia-smi.exe calls in batch file to set clocking in windows... but i gave up windows because every time one of my cards crashed it took out the driver and i had to uninstall and reinstall driver so now i'm on hiveos and loving it

[CryptoMiningInsider]

If the Windows Version of lolMiner 1.47 is in BETA can you please share a Link.
I have a full LHR Rig and would be happy to help test.

[r0ver2]

There are no BETA, but there is an ALPHA version. Visit the official telegram channel, and check the pinned message: https://t.me/lolMiner

Just remember its a reason its alpha, and not a finished release :D

[CryptoMiningInsider]

Thank You!

[aluciano34]

Hi, I have 4 cards. 3060ti from Hynix, a 2060 and a 1660ti. They were working fine, but updated to the new version, (current 0.6-213@220325) and dual mined. Since he made it, the 3060 ti cards are unstable and vary their speed constantly (from 11 Mhs to 37 Mhs). When I open the Hive Shell, I get this error_****### GPU 5: You need to recalibrate the unlocker. Doing so... _
Does anyone know what I can do, I have changed the overclocks many, many times, but I can't get it to stabilize.

Thanks

[Ninety8carrots]

I have 2 3060ti with Hynix rev1.0 LHR in my set up at locations GPU0 and GPU2. I had trouble with stability of GPU0 similar to what you stated. I had to reduce my memory OC to 1600 (core lock OC currently 1500 using HiveOS) to become stabile mining ETH+TON.

I do not have LHR percentage predefined in the arguments within flight sheet.

From reading the miner documenting, with LolMiner you will need to restart the miner everytime you adjust OC settings because of the algorithms calibrating function.

In my experience, if recalibration repeatedly occurs you will need to reduce intensity of OC settings and completely restart the miner. It also may not hurt to try and restart your rig completely.

-I am using Nvidia driver version 510.*
-it may take up to 10-15 min to stabilize
-if nothing else works you can try to update the GPU bios of the unstable card with another 3060ti with Hynix that is stable

[iUniQuM]

I've been pressing f5 for a week now, but there is still no window :(

[r0ver2]

Keep on checking, you will soon find something :)

[charnet3d]

Shit I even tried GPU virtualization using WSL2 and docker on a windows host (can't really run linux native on my pcs as they're being used) but it seems mining that way is broken, whenever any miner software starts the gpu core and mem clocks just tank to 4xx Mhz which is the P8 state and stay that way until the miner is closed. Really sad.

[charnet3d]

Just noticed the comment about the alpha version above, trying it now :)

[ovan-mining87]

l

1.48 released

[byramses]

lol miner v1.48 Galax brand lhr v2 rtx 3060 in the latest version, my card that does not exceed 37mh band with trex now takes 39 to 40mh.. you are great, it works very stable ...
win 11
nvidia driver 512.15
lol miner 1,48
msi afterburn oc settings
mclk 1560
cclk -500 or - 100 or - 150
power limit 86%
fan 70%
temp 55-56

[byramses]

[byramses]

[byramses]

124 w 38.30mh super v 1.48

[byramses]

I can't do overclock fan setting and powerlimit in windows, can you show an example? fan setting 60 , powerlimit 120watt can you write an example command

[ovan-mining87]

I can't do overclock fan setting and powerlimit in windows, can you show an example? fan setting 60 , powerlimit 120watt can you write an example command

maybe you can set in afterburner fan seting to 60 power limit to 70 or 80 depending to your GPU max TDP. my palit has TDP 180w so I set power limit to 65 - 68 in afterburner.
im no longer using windows. because my rig only for mining.

[byramses]

--powerlimit 72 --fan 60 I'm doing something like this, I'm running the bat file as admin and I'm getting an error. How should I add a command to the afterburn standalone bat file? is there a way?

[ovan-mining87]

--powerlimit 72 --fan 60 I'm doing something like this, I'm running the bat file as admin and I'm getting an error. How should I add a command to the afterburn standalone bat file? is there a way?

not to set command line. just apply in afterburner app itself.
ithink bat file only accept cclk & mclk command

[byramses]

I understand, thank you, my friend, it often gets an error illegal cuda error in the windows environment, it happens a few times a day. We cannot repeat the settings when we are not at the computer. it would be even better if it was like other trex nbminer and similar miners

[lefshaa]

how to enable monitoring gui lolMiner API now has new page /gui, I do not understand where and what to prescribe in .bat !.yf t-rex all convenient and easy to configure, can you send a screenshot and an example of what to prescribe in it? where do I get http://:/gui ??????

[lefshaa]

I need to monitor two regs on windows and from my phone

[vocals100]

Hi, maybe you can help me, I do not understand too much how to do this: how do you specify an ETH wallet for receiving TONCOIN mined tokens? I was told that it can be used that way because TONCOIN is an ERC20 token. Thank you.

[MizzatMining]

When it says new job received and has a value shown followed by G or when it says you found a share with a value followed by G. What does this G mean? Im new to mining pls dont roast me 😅