02-tests/task 02 Release 2016.07 - RC1

[BytesGalore]

Task # 02

Perform a subset of tests on iotlab-m3 node:

• bitarithm_timings
• bloom_bytes
• coap
• conn_ip sent 3 pings out (ping6)
• cpp11_condition_variable
• cpp11_mutex
• cpp11_thread
• driver_adt7310
• driver_at30tse75x
• driver_at86rf2xx
• driver_bh1750
• driver_bmp180
• driver_dht -> results in expected behaviour: gets stuck at dht_read(dev, &temp, &hum), since no DHT 11/22 temperature and humidity sensor is attached
• driver_enc28j60
• driver_encx24j600
• driver_hdc1000 -> results in expected behaviour: Initializing HDC1000 sensor at I2C_0... [Failed]
• driver_hih6130
• driver_ina220
• driver_isl29020
• driver_isl29125
• driver_kw2xrf
• driver_l3g4200d
• driver_lis3dh
• driver_lis3mdl
• driver_lps331ap
• driver_lsm303dlhc
• driver_mag3110
• driver_mma8652 -> results in expected behaviour: Initializing MMA8652 accelerometer at I2C_0... [Failed]
• driver_mpl3115a2
• driver_mpu9150
• driver_mq3
• driver_nrf24l01p_lowlevel
• driver_nrfmin
• driver_nvram_spi -> results in expected behaviour: Verifying contents... [Failed]
• driver_pcd8544
• driver_pir
• driver_servo
• driver_si70xx
• driver_srf02
• driver_srf08 -> results in expected behaviour: no values are printed, since no SRF08 ultrasonic sensor is attached
• driver_tcs37727
• driver_tmp006
• driver_xbee -> results in expected behaviour: the device cannot be configured, since no xbee shield is attached
• emb6
• fault_handler
• float -> only shows/spams - on the screen
• fmt_print
• gnrc_ipv6_ext
• gnrc_sixlowpan
• irq
• leds
• libfixmath
• lwip
• malloc
• minimal
• msg_send_receive
• msg_try_receive
• mutex_order
• mutex_unlock_and_sleep
• netdev2_test
• netstats_l2
• nhdp
• periph_adc
• periph_cpuid
• periph_dac
• periph_gpio
• periph_hwrng
• periph_i2c
• periph_pwm
• periph_rtc
• periph_rtt
• periph_spi
• periph_timer
• periph_uart
• pipe
• pkg_cmsis-dsp
• pkg_jsmn
• pkg_micro-ecc
• pkg_u8g2
• posix_semaphore
• posix_sleep
• pthread
• pthread_barrier
• pthread_cleanup
• pthread_condition_variable
• pthread_cooperation
• pthread_rwlock
• pthread_tls
• saul
• sched_testing
• shell
• sizeof_tcb
• slip
• struct_tm_utility
• thread_basic
• thread_cooperation
• thread_exit
• thread_flags
• thread_flood
• thread_msg
• thread_msg_avail
• thread_msg_block_wo_queue
• thread_msg_block_w_queue
• thread_msg_seq
• warn_conflict
• xtimer_drift -> I ran it for a handful minutes: max drift/jitter is about +-35 us (these high values occured ~ 4 times a min)
• xtimer_hang
• xtimer_longterm
• xtimer_msg
• xtimer_msg_receive_timeout
• xtimer_now64_continuity
• xtimer_remove
• xtimer_reset
• xtimer_usleep_until
• zep

list made manually by executing:

ls -1a | sed  -e 's/^/- [ ] /'

in RIOT/tests and removing unittests et al. from the list

[BytesGalore]

tests performed on:
RIOT-OS/RIOT@b5cb68b
with:
gcc version 5.3.1 20160307 (release) [ARM/embedded-5-branch revision 234589] (GNU Tools for ARM Embedded Processors)