diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json
index d2253ed3826..56a7c4bdaf8 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json	
@@ -11,9 +11,9 @@
 	"printer_structure": "i3",
 	"default_print_profile": "0.20mm Standard @Creality Ender3V3KE",
 	"extruder_clearance_height_to_rod": "47",
-    "extruder_clearance_max_radius": "90",
-    "extruder_clearance_radius": "90",
-    "machine_load_filament_time": "11",
+    	"extruder_clearance_max_radius": "90",
+    	"extruder_clearance_radius": "90",
+   	"machine_load_filament_time": "11",
 	"nozzle_diameter": [
 		"0.4"
 	],
@@ -23,7 +23,7 @@
 		"220x220",
 		"0x220"
 	],
-	"printable_height": "240",
+	"printable_height": "245",
 	"nozzle_type": "brass",
 	"auxiliary_fan": "0",
 	"machine_max_acceleration_extruding": [
@@ -120,7 +120,7 @@
 		"Creality Generic PLA @Ender-3V3-all"
 	],
 	"machine_start_gcode": "SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=fan0_min VALUE=30 ;compensate for fan speed\nSET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 ;revert accel_to_decel back to 2500\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set bed temp\nG28 X Y ;Home XY axes\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nG28 Z ;Home Z axis & load bed mesh\nBED_MESH_CALIBRATE PROBE_COUNT=6,6 ;Auto bed level\n\nM104 S[nozzle_temperature_initial_layer] ;Set nozzle temp\nG92 E0 ;Reset Extruder\nG1 X-2.0 Y20 Z0.3 F5000.0 ;Move to start position\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 Z0.2 ;Lower nozzle to printing height\nG1 Y145.0 F1500.0 E15 ;Draw the first line\nG1 X-1.7 F5000.0 ;Move to side a little\nG1 Y30 F1500.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder",
-	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z{if max_layer_z < 50}25{else}5{endif} ;Raise Z more\nG90 ;Absolute positionning\nG1 X2 Y218 F3000 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
+	"machine_end_gcode": "G92 E0 ;Reset Extruder\nG1 E-1.2 Z{max_layer_z + 0.5} F1800 ;Retract and raise Z\n{if max_layer_z < 50}\nG1 Z{max_layer_z + 25} F900 ;Raise Z more\n{endif}\n\nG1 X2 Y218 F3000 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
 	"scan_first_layer": "0",
 	"thumbnails": [
 		"96x96",