Only 1000mbs on DSM 7.0.1 DS920+

[BodhiSmoketiffa]

Hello, I'm trying to use the QNA-UC5G1T 5Gbe Adapter to connect to my DS920+ but can't get more than 100mbs transfers regardless of what protocol I choose. I've tried SMB and iSCSI. I have Static IP for my ETH ports connected directly to network and Static IP for the QNAP Device and my PC NIC Card. I know I should have never updated to DSM 7 but this is my first NAS and I goofed. Thanks in advance. I really appreciate any help at all.

Replace this line with your answer.

Description of your products

• DS920+
  • and output of ``Linux TUN_MPS_NAS 4.4.180+ #42218 SMP Mon Oct 18 19:16:55 CST 2021 x86_64 GNU/Li nux synology_geminilake_920+
    ` command
  • DSM version x.x
• QNA-UC5G1T

Description of your environment

• connect directly to a PC
  • PC:Intel(R) Ethernet 10G 2P X550-t Adapter
    or chipset name
  • Hub: model name
• cable category CAT 6

Output of dmesg command

[    0.706625] pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
[    0.715001] pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
[    0.723375] pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
[    0.731750] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
[    0.740126] pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
[    0.748502] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
[    0.756877] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
[    0.765254] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.771398] pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000
[    0.771729] pci 0000:00:02.0: [8086:3185] type 00 class 0x030000
[    0.771750] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[    0.771758] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.771764] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.772101] pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000
[    0.772149] pci 0000:00:0f.0: reg 0x10: [mem 0xa1312000-0xa1312fff 64bit]
[    0.772239] pci 0000:00:0f.0: PME# supported from D3hot
[    0.772533] pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601
[    0.772558] pci 0000:00:12.0: reg 0x10: [mem 0xa1310000-0xa1311fff]
[    0.772567] pci 0000:00:12.0: reg 0x14: [mem 0xa131b000-0xa131b0ff]
[    0.772576] pci 0000:00:12.0: reg 0x18: [io  0x4080-0x4087]
[    0.772584] pci 0000:00:12.0: reg 0x1c: [io  0x4088-0x408b]
[    0.772593] pci 0000:00:12.0: reg 0x20: [io  0x4060-0x407f]
[    0.772601] pci 0000:00:12.0: reg 0x24: [mem 0xa1319000-0xa13197ff]
[    0.772636] pci 0000:00:12.0: PME# supported from D3hot
[    0.772884] pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400
[    0.772953] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[    0.773171] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.779369] pci 0000:00:13.2: [8086:31da] type 01 class 0x060400
[    0.779442] pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
[    0.779656] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.785848] pci 0000:00:13.3: [8086:31db] type 01 class 0x060400
[    0.785913] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
[    0.786130] pci 0000:00:13.3: System wakeup disabled by ACPI
[    0.792337] pci 0000:00:14.0: [8086:31d6] type 01 class 0x060400
[    0.792410] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[    0.792627] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.798819] pci 0000:00:14.1: [8086:31d7] type 01 class 0x060400
[    0.798897] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
[    0.799113] pci 0000:00:14.1: System wakeup disabled by ACPI
[    0.805330] pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330
[    0.805360] pci 0000:00:15.0: reg 0x10: [mem 0xa1300000-0xa130ffff 64bit]
[    0.805418] pci 0000:00:15.0: PME# supported from D3hot D3cold
[    0.805638] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.811858] pci 0000:00:16.0: [8086:31ac] type 00 class 0x118000
[    0.811894] pci 0000:00:16.0: reg 0x10: [mem 0xa1313000-0xa1313fff 64bit]
[    0.811908] pci 0000:00:16.0: reg 0x18: [mem 0xa1314000-0xa1314fff 64bit]
[    0.812230] pci 0000:00:18.0: [8086:31bc] type 00 class 0x118000
[    0.812260] pci 0000:00:18.0: reg 0x10: [mem 0xa1315000-0xa1315fff 64bit]
[    0.812274] pci 0000:00:18.0: reg 0x18: [mem 0xa1316000-0xa1316fff 64bit]
[    0.812566] pci 0000:00:18.2: [8086:31c0] type 00 class 0x118000
[    0.812596] pci 0000:00:18.2: reg 0x10: [mem 0xa1317000-0xa1317fff 64bit]
[    0.812610] pci 0000:00:18.2: reg 0x18: [mem 0xa1318000-0xa1318fff 64bit]
[    0.812951] pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100
[    0.813343] pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500
[    0.813408] pci 0000:00:1f.1: reg 0x10: [mem 0xa131a000-0xa131a0ff 64bit]
[    0.813487] pci 0000:00:1f.1: reg 0x20: [io  0x4040-0x405f]
[    0.813878] pci 0000:01:00.0: [1b4b:9235] type 00 class 0x010601
[    0.813908] pci 0000:01:00.0: reg 0x10: [io  0x3028-0x302f]
[    0.813918] pci 0000:01:00.0: reg 0x14: [io  0x3034-0x3037]
[    0.813927] pci 0000:01:00.0: reg 0x18: [io  0x3020-0x3027]
[    0.813937] pci 0000:01:00.0: reg 0x1c: [io  0x3030-0x3033]
[    0.813946] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x301f]
[    0.813956] pci 0000:01:00.0: reg 0x24: [mem 0xa1200000-0xa12007ff]
[    0.813967] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.814007] pci 0000:01:00.0: PME# supported from D3hot
[    0.814048] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.822213] pci 0000:00:13.0: PCI bridge to [bus 01]
[    0.827587] pci 0000:00:13.0:   bridge window [io  0x3000-0x3fff]
[    0.827591] pci 0000:00:13.0:   bridge window [mem 0xa1200000-0xa12fffff]
[    0.827651] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.827694] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.827721] pci 0000:02:00.0: reg 0x18: [mem 0xa1104000-0xa1104fff 64bit]
[    0.827739] pci 0000:02:00.0: reg 0x20: [mem 0xa1100000-0xa1103fff 64bit]
[    0.827809] pci 0000:02:00.0: supports D1 D2
[    0.827811] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.827871] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.836037] pci 0000:00:13.2: PCI bridge to [bus 02]
[    0.841410] pci 0000:00:13.2:   bridge window [io  0x2000-0x2fff]
[    0.841415] pci 0000:00:13.2:   bridge window [mem 0xa1100000-0xa11fffff]
[    0.841481] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.841523] pci 0000:03:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.841549] pci 0000:03:00.0: reg 0x18: [mem 0xa1004000-0xa1004fff 64bit]
[    0.841566] pci 0000:03:00.0: reg 0x20: [mem 0xa1000000-0xa1003fff 64bit]
[    0.841635] pci 0000:03:00.0: supports D1 D2
[    0.841638] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.841698] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.849863] pci 0000:00:13.3: PCI bridge to [bus 03]
[    0.855233] pci 0000:00:13.3:   bridge window [io  0x1000-0x1fff]
[    0.855237] pci 0000:00:13.3:   bridge window [mem 0xa1000000-0xa10fffff]
[    0.855284] pci 0000:00:14.0: PCI bridge to [bus 04]
[    0.860833] pci 0000:00:14.1: PCI bridge to [bus 05]
[    0.866366] pci_bus 0000:00: on NUMA node 0
[    0.867190] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.876044] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.885006] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.893970] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.902929] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.911889] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.920850] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.929812] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.940141] ACPI: Enabled 3 GPEs in block 00 to 7F
[    0.945465] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.951641] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.960710] vgaarb: loaded
[    0.963720] vgaarb: bridge control possible 0000:00:02.0
[    0.969745] SCSI subsystem initialized
[    0.973922] libata version 3.00 loaded.
[    0.973992] pps_core: LinuxPPS API ver. 1 registered
[    0.979401] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.989633] PTP clock support registered
[    0.994109] EFI Variables Facility v0.08 2004-May-17
[    1.057796] pstore: Registered efi as persistent store backend
[    1.064154] PCI: Using ACPI for IRQ routing
[    1.075327] PCI: pci_cache_line_size set to 64 bytes
[    1.075426] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    1.075429] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[    1.075431] e820: reserve RAM buffer [mem 0x01de9fb8-0x03ffffff]
[    1.075433] e820: reserve RAM buffer [mem 0x59b615c0-0x5bffffff]
[    1.075434] e820: reserve RAM buffer [mem 0x70f9e000-0x73ffffff]
[    1.075436] e820: reserve RAM buffer [mem 0x78d5f000-0x7bffffff]
[    1.075438] e820: reserve RAM buffer [mem 0x79c00000-0x7bffffff]
[    1.075738] clocksource: Switched to clocksource hpet
[    1.090681] AppArmor: AppArmor Filesystem Enabled
[    1.095896] pnp: PnP ACPI init
[    1.099307] system 00:00: [io  0x0680-0x069f] has been reserved
[    1.105816] system 00:00: [io  0x0400-0x047f] has been reserved
[    1.112429] system 00:00: [io  0x0500-0x05fe] has been reserved
[    1.119056] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.119655] system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved
[    1.127279] system 00:01: [mem 0xfea00000-0xfeafffff] has been reserved
[    1.134681] system 00:01: [mem 0xfed01000-0xfed01fff] has been reserved
[    1.142086] system 00:01: [mem 0xfed03000-0xfed03fff] has been reserved
[    1.149489] system 00:01: [mem 0xfed06000-0xfed06fff] has been reserved
[    1.156892] system 00:01: [mem 0xfed08000-0xfed09fff] has been reserved
[    1.164293] system 00:01: [mem 0xfed80000-0xfedbffff] has been reserved
[    1.171695] system 00:01: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    1.179098] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[    1.186499] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.186809] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.186992] pnp: PnP ACPI: found 3 devices
[    1.200691] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.210462] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    1.221597] pci 0000:01:00.0: BAR 6: assigned [mem 0xa1210000-0xa121ffff pref]
[    1.229641] pci 0000:00:13.0: PCI bridge to [bus 01]
[    1.235195] pci 0000:00:13.0:   bridge window [io  0x3000-0x3fff]
[    1.242010] pci 0000:00:13.0:   bridge window [mem 0xa1200000-0xa12fffff]
[    1.249613] pci 0000:00:13.2: PCI bridge to [bus 02]
[    1.255162] pci 0000:00:13.2:   bridge window [io  0x2000-0x2fff]
[    1.261983] pci 0000:00:13.2:   bridge window [mem 0xa1100000-0xa11fffff]
[    1.269586] pci 0000:00:13.3: PCI bridge to [bus 03]
[    1.275137] pci 0000:00:13.3:   bridge window [io  0x1000-0x1fff]
[    1.281958] pci 0000:00:13.3:   bridge window [mem 0xa1000000-0xa10fffff]
[    1.289562] pci 0000:00:14.0: PCI bridge to [bus 04]
[    1.295118] pci 0000:00:14.1: PCI bridge to [bus 05]
[    1.300672] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    1.300675] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    1.300678] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    1.300680] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    1.300683] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    1.300685] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    1.300687] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    1.300690] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
[    1.300692] pci_bus 0000:00: resource 12 [mem 0x80000000-0xbfffffff window]
[    1.300694] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window]
[    1.300696] pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window]
[    1.300699] pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window]
[    1.300701] pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window]
[    1.300703] pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window]
[    1.300706] pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window]
[    1.300708] pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window]
[    1.300710] pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window]
[    1.300712] pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window]
[    1.300715] pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window]
[    1.300717] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.300719] pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa12fffff]
[    1.300722] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    1.300724] pci_bus 0000:02: resource 1 [mem 0xa1100000-0xa11fffff]
[    1.300726] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    1.300728] pci_bus 0000:03: resource 1 [mem 0xa1000000-0xa10fffff]
[    1.300816] NET: Registered protocol family 2
[    1.305714] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.313701] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.321115] TCP: Hash tables configured (established 32768 bind 32768)
[    1.328359] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.335070] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.342315] NET: Registered protocol family 1
[    1.347162] pci 0000:00:02.0: Video device with shadowed ROM
[    1.348803] pci 0000:01:00.0: Apply mv9235 specific programming steps
[    1.355848] PCI: CLS 64 bytes, default 64
[    1.548668] Trying to unpack rootfs image as initramfs...
[    2.946154] decompress cpio completed and skip redundant lzma
[    2.953700] Freeing initrd memory: 5156K
[    2.957944] DMAR: Host address width 39
[    2.962207] DMAR: DRHD base: 0x000000fed64000 flags: 0x0
[    2.968169] DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
[    2.977500] DMAR: DRHD base: 0x000000fed65000 flags: 0x1
[    2.983449] DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
[    2.992306] DMAR: RMRR base: 0x000000777d7000 end: 0x000000777f6fff
[    2.999315] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[    3.006338] DMAR: No ATSR found
[    3.010079] DMAR: dmar1: Using Queued invalidation
[    3.015277] IOMMU passthrough mode = 1
[    3.019480] DMAR: Hardware identity mapping for device 0000:00:00.0
[    3.026472] DMAR: Hardware identity mapping for device 0000:00:0f.0
[    3.033477] DMAR: Hardware identity mapping for device 0000:00:12.0
[    3.040496] DMAR: Hardware identity mapping for device 0000:00:13.0
[    3.047511] DMAR: Hardware identity mapping for device 0000:00:13.2
[    3.054517] DMAR: Hardware identity mapping for device 0000:00:13.3
[    3.061535] DMAR: Hardware identity mapping for device 0000:00:14.0
[    3.068545] DMAR: Hardware identity mapping for device 0000:00:14.1
[    3.075553] DMAR: Hardware identity mapping for device 0000:00:15.0
[    3.082570] DMAR: Hardware identity mapping for device 0000:00:16.0
[    3.089583] DMAR: Hardware identity mapping for device 0000:00:18.0
[    3.096587] DMAR: Hardware identity mapping for device 0000:00:18.2
[    3.103607] DMAR: Hardware identity mapping for device 0000:00:1f.0
[    3.110620] DMAR: Hardware identity mapping for device 0000:00:1f.1
[    3.117627] DMAR: Hardware identity mapping for device 0000:01:00.0
[    3.124646] DMAR: Hardware identity mapping for device 0000:02:00.0
[    3.131661] DMAR: Hardware identity mapping for device 0000:03:00.0
[    3.138663] DMAR: Setting RMRR:
[    3.142177] DMAR: Ignoring identity map for HW passthrough device 0000:00:15.0 [0x777d7000 - 0x777f6fff]
[    3.152793] DMAR: Prepare 0-16MiB unity mapping for LPC
[    3.158634] DMAR: Ignoring identity map for HW passthrough device 0000:00:1f.0 [0x0 - 0xffffff]
[    3.168403] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    3.175654] iommu: Adding device 0000:00:00.0 to group 0
[    3.181546] iommu: Adding device 0000:00:0f.0 to group 1
[    3.187478] iommu: Adding device 0000:00:12.0 to group 2
[    3.193423] iommu: Adding device 0000:00:13.0 to group 3
[    3.199359] iommu: Adding device 0000:00:13.2 to group 4
[    3.205300] iommu: Adding device 0000:00:13.3 to group 5
[    3.211244] iommu: Adding device 0000:00:14.0 to group 6
[    3.217182] iommu: Adding device 0000:00:14.1 to group 7
[    3.223127] iommu: Adding device 0000:00:15.0 to group 8
[    3.229069] iommu: Adding device 0000:00:16.0 to group 9
[    3.235015] iommu: Adding device 0000:00:18.0 to group 10
[    3.241047] iommu: Adding device 0000:00:18.2 to group 10
[    3.247092] iommu: Adding device 0000:00:1f.0 to group 11
[    3.253127] iommu: Adding device 0000:00:1f.1 to group 11
[    3.259166] iommu: Adding device 0000:01:00.0 to group 12
[    3.265205] iommu: Adding device 0000:02:00.0 to group 13
[    3.271243] iommu: Adding device 0000:03:00.0 to group 14
[    3.280337] audit: initializing netlink subsys (disabled)
[    3.286248] audit: type=2000 audit(1562661274.004:1): initialized
[    3.293342] Initialise system trusted keyring
[    3.322327] VFS: Disk quotas dquot_6.6.0
[    3.326631] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.456565] Key type asymmetric registered
[    3.460996] Asymmetric key parser 'x509' registered
[    3.466538] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    3.474720] io scheduler noop registered
[    3.479094] io scheduler deadline registered
[    3.483982] io scheduler cfq registered (default)
[    3.490319] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt
[    3.497961] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    3.505253] pcie_pme 0000:00:13.0:pcie01: service driver pcie_pme loaded
[    3.505298] pcieport 0000:00:13.2: Signaling PME through PCIe PME interrupt
[    3.513039] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    3.520343] pcie_pme 0000:00:13.2:pcie01: service driver pcie_pme loaded
[    3.520367] pcieport 0000:00:13.3: Signaling PME through PCIe PME interrupt
[    3.528134] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    3.535439] pcie_pme 0000:00:13.3:pcie01: service driver pcie_pme loaded
[    3.535464] pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt
[    3.543231] pcie_pme 0000:00:14.0:pcie01: service driver pcie_pme loaded
[    3.543254] pcieport 0000:00:14.1: Signaling PME through PCIe PME interrupt
[    3.551026] pcie_pme 0000:00:14.1:pcie01: service driver pcie_pme loaded
[    3.884114] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.054005] Linux agpgart interface v0.103
[    4.090277] brd: module loaded
[    4.100417] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    4.109300] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    4.140665] dw-apb-uart.1: ttyS1 at MMIO 0xa1315000 (irq = 54, base_baud = 115200) is a 16550A
[    4.159415] console [ttyS0] disabled
[    4.163271] dw-apb-uart.2: ttyS0 at MMIO 0xa1317000 (irq = 6, base_baud = 115200) is a 16550A
[    4.172995] console [ttyS0] enabled
[    4.180598] bootconsole [earlyser0] disabled
[    4.190269] Loading iSCSI transport class v2.0-870.
[    4.198501] ahci 0000:00:12.0: version 3.0
[    4.198778] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.207862] ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum part deso sadm sds apst
[    4.219409] scsi host0: ahci
[    4.224636] scsi host1: ahci
[    4.228065] ata1 : SATA max UDMA/133 abar m2048@0xa1319000 port 0xa1319100 irq 341
[    4.236551] ata2 : SATA max UDMA/133 abar m2048@0xa1319000 port 0xa1319180 irq 341
[    4.245275] Change defer qc mode on external port for compatibility
[    4.252292] Change defer qc mode on external port for compatibility
[    4.259306] Change defer qc mode on external port for compatibility
[    4.266323] Change defer qc mode on external port for compatibility
[    4.284018] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    4.293078] ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    4.302182] Cannot find slot node of this ata_port.
[    4.311164] scsi host2: ahci
[    4.317324] scsi host3: ahci
[    4.325534] scsi host4: ahci
[    4.330742] scsi host5: ahci
[    4.334092] ata3 : SATA max UDMA/133 abar m2048@0xa1200000 port 0xa1200100 irq 342
[    4.342572] ata4 : SATA max UDMA/133 abar m2048@0xa1200000 port 0xa1200180 irq 342
[    4.351047] ata5 : SATA max UDMA/133 abar m2048@0xa1200000 port 0xa1200200 irq 342
[    4.359519] ata6 : SATA max UDMA/133 abar m2048@0xa1200000 port 0xa1200280 irq 342
[    4.368128] Delay 11 seconds to wait for disk 1 ready.
[    4.368201] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    5.548893] i8042: No controller found
[    5.577623] mousedev: PS/2 mouse device common for all mice
[    5.596814] rtc-s35390a i2c-RTC35390:00: rtc core: registered rtc-s35390a as rtc0
[    5.605217] i2c /dev entries driver
[    5.616337] i801_smbus 0000:00:1f.1: SMBus using polling
[    5.627883] md: raid1 personality registered for level 1
[    5.633985] NET: Registered protocol family 17
[    5.638981] Key type dns_resolver registered
[    5.667673] mce: Using 7 MCE banks
[    5.671801] registered taskstats version 1
[    5.676405] Loading compiled-in untrusted X.509 certificates
[    5.682743] Loading compiled-in X.509 certificates
[    5.688147] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[    5.719987] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[    5.731302] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[    5.744257] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[    5.755268] page_owner is disabled
[    5.759132] AppArmor: AppArmor sha1 policy hashing enabled
[    5.765978] rtc-s35390a i2c-RTC35390:00: setting system clock to 2021-11-05 14:19:32 UTC (1636121972)
[    6.145148] ata3 : SATA link down (SStatus 0 SControl 300)
[    6.151301] ata3 : No present pin info for SATA link down event
[    7.245470] tsc: Refined TSC clocksource calibration: 1996.801 MHz
[    7.252400] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990c0666d0, max_idle_ns: 881590676152 ns
[   12.588526] ata2 (slot 4): link is slow to respond, please be patient (ready=0)
[   12.604562] ata1 (slot 3): link is slow to respond, please be patient (ready=0)
[   15.382838] Delay 11 seconds to wait for disk 2 ready.
[   17.417874] ata1 (slot 3): softreset failed (device not ready)
[   17.424408] ata1 (slot 3): SRST fail, set srst fail flag
[   17.438876] ata2 (slot 4): softreset failed (device not ready)
[   17.445412] ata2 (slot 4): SRST fail, set srst fail flag
[   29.390327] clocksource: Switched to clocksource tsc
[   29.544631] ata1 (slot 3): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   29.552416] ata1 (slot 3): link reset sucessfully clear error flags
[   29.559429] ata2 (slot 4): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   29.567201] ata2 (slot 4): link reset sucessfully clear error flags
[   29.586615] ata1.00 (slot 3): disabling queued TRIM support
[   29.586619] ata1.00 (slot 3): ATA-11: ST4000NE001-2MA101, EN01, max UDMA/133
[   29.594505] ata1.00 (slot 3): 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   29.603448] ata1.00 (slot 3): SN:            WS20G1EL
[   29.609097] ata2.00 (slot 4): disabling queued TRIM support
[   29.609100] ata2.00 (slot 4): ATA-11: ST4000NE001-2MA101, EN01, max UDMA/133
[   29.616973] ata2.00 (slot 4): 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   29.625913] ata2.00 (slot 4): SN:            WS20GF69
[   29.645215] ata1.00 (slot 3): disabling queued TRIM support
[   29.645221] ata1.00 (slot 3): configured for UDMA/133
[   29.650879] ata2.00 (slot 4): disabling queued TRIM support
[   29.650885] ata2.00 (slot 4): configured for UDMA/133
[   29.652346] scsi 0:0:0:0: Direct-Access     ATA      ST4000NE001-2MA101       EN01 PQ: 0 ANSI: 5
[   29.652522] got SATA disk[0]
[   29.652686] sd 0:0:0:0: [sata1] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[   29.652688] sd 0:0:0:0: [sata1] 4096-byte physical blocks
[   29.652733] sd 0:0:0:0: [sata1] Write Protect is off
[   29.652735] sd 0:0:0:0: [sata1] Mode Sense: 00 3a 00 00
[   29.652755] sd 0:0:0:0: [sata1] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   29.685263]  sata1: p1 p2 p3
[   29.685662] sd 0:0:0:0: [sata1] Attached SCSI disk
[   29.693624] ata6 : SATA link down (SStatus 0 SControl 300)
[   29.693631] ata6 : No present pin info for SATA link down event
[   29.723244] scsi 1:0:0:0: Direct-Access     ATA      ST4000NE001-2MA101       EN01 PQ: 0 ANSI: 5
[   29.733242] got SATA disk[1]
[   29.736617] sd 1:0:0:0: [sata2] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[   29.745499] sd 1:0:0:0: [sata2] 4096-byte physical blocks
[   29.751688] sd 1:0:0:0: [sata2] Write Protect is off
[   29.757253] sd 1:0:0:0: [sata2] Mode Sense: 00 3a 00 00
[   29.757292] sd 1:0:0:0: [sata2] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   29.799769]  sata2: p1 p2 p3
[   29.803336] sd 1:0:0:0: [sata2] Attached SCSI disk
[   32.249804] ata4 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   32.302194] ata4.00 (slot 1): disabling queued TRIM support
[   32.302197] ata4.00 (slot 1): ATA-11: ST4000NE001-2MA101, EN01, max UDMA/133
[   32.310076] ata4.00 (slot 1): 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   32.319018] ata4.00 (slot 1): SN:            WS20GF92
[   32.361693] ata4.00 (slot 1): disabling queued TRIM support
[   32.361699] ata4.00 (slot 1): configured for UDMA/133
[   32.368901] scsi 3:0:0:0: Direct-Access     ATA      ST4000NE001-2MA101       EN01 PQ: 0 ANSI: 5
[   32.378897] got SATA disk[2]
[   32.382242] sd 3:0:0:0: [sata3] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[   32.391107] sd 3:0:0:0: [sata3] 4096-byte physical blocks
[   32.397259] sd 3:0:0:0: [sata3] Write Protect is off
[   32.402827] sd 3:0:0:0: [sata3] Mode Sense: 00 3a 00 00
[   32.402867] sd 3:0:0:0: [sata3] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   32.482185]  sata3: p1 p2 p3
[   32.485761] sd 3:0:0:0: [sata3] Attached SCSI removable disk
[   34.720960] ata5 (slot 2): link is slow to respond, please be patient (ready=0)
[   39.574274] ata5 (slot 2): softreset failed (device not ready)
[   39.580793] ata5 (slot 2): SRST fail, set srst fail flag
[   42.076447] ata5 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   42.084237] ata5 (slot 2): link reset sucessfully clear error flags
[   42.109258] ata5.00 (slot 2): disabling queued TRIM support
[   42.109281] ata5.00 (slot 2): ATA-11: ST4000NE001-2MA101, EN01, max UDMA/133
[   42.117160] ata5.00 (slot 2): 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   42.126103] ata5.00 (slot 2): SN:            WS20G1M3
[   42.150689] ata5.00 (slot 2): disabling queued TRIM support
[   42.150694] ata5.00 (slot 2): configured for UDMA/133
[   42.157892] scsi 4:0:0:0: Direct-Access     ATA      ST4000NE001-2MA101       EN01 PQ: 0 ANSI: 5
[   42.167890] got SATA disk[3]
[   42.171258] sd 4:0:0:0: [sata4] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[   42.180120] sd 4:0:0:0: [sata4] 4096-byte physical blocks
[   42.186249] sd 4:0:0:0: [sata4] Write Protect is off
[   42.191796] sd 4:0:0:0: [sata4] Mode Sense: 00 3a 00 00
[   42.191841] sd 4:0:0:0: [sata4] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   42.267907]  sata4: p1 p2 p3
[   42.271490] sd 4:0:0:0: [sata4] Attached SCSI removable disk
[   42.279661] Freeing unused kernel memory: 976K
[   42.284629] Write protecting the kernel read-only data: 8192k
[   42.291326] Freeing unused kernel memory: 576K
[   42.297054] Freeing unused kernel memory: 268K
[   42.361939] ACPI: bus type USB registered
[   42.366461] usbcore: registered new interface driver usbfs
[   42.372612] usbcore: registered new interface driver hub
[   42.378583] usbcore: registered new interface driver ethub
[   42.384732] usbcore: registered new device driver usb
[   42.409528] xhci_hcd 0000:00:15.0: xHCI Host Controller
[   42.416447] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[   42.625848] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009010
[   42.635280] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[   42.635655] hub 1-0:1.0: USB hub found
[   42.639868] hub 1-0:1.0: 9 ports detected
[   42.644419]  port1 is going to power up Vbus by GPIO#29(ACTIVE_HIGH)
[   42.751546] host 0000:00:15.0 port 1 has Vbus GPIO#29 with polarity ACTIVE_HIGH
[   42.759950]  port2 is going to power up Vbus by GPIO#30(ACTIVE_HIGH)
[   42.867058] host 0000:00:15.0 port 2 has Vbus GPIO#30 with polarity ACTIVE_HIGH
[   42.876462] xhci_hcd 0000:00:15.0: xHCI Host Controller
[   42.882327] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[   42.890647] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   42.899964] hub 2-0:1.0: USB hub found
[   42.904175] hub 2-0:1.0: 7 ports detected
[   42.908713] host 0000:00:15.0 port 1 has Vbus GPIO#29 with polarity ACTIVE_HIGH
[   42.917119] host 0000:00:15.0 port 2 has Vbus GPIO#30 with polarity ACTIVE_HIGH
[   42.940703] geminilake_synobios: loading out-of-tree module taints kernel.
[   42.949921] geminilake_synobios: module license 'Synology Inc.' taints kernel.
[   42.957987] Disabling lock debugging due to kernel taint
[   42.974625] synobios open /dev/ttyS1 success
[   42.989692] correction with 0x00
[   42.994318] 2021-11-5 14:20:9 UTC
[   42.998020] synobios: load, major number 201
[   43.002794] Brand: Synology
[   43.005914] Model: DS-920+
[   43.008935] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   43.018375] synobios cpu_arch proc entry initialized
[   43.023919] synobios crypto_hw proc entry initialized
[   43.029562] synobios syno_platform proc entry initialized
[   43.040286] Module [geminilake_synobios] is removed.
[   43.046079] synobios: unload
[   43.198517] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[   43.462729] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[   51.100616] random: nonblocking pool is initialized
[   51.199485] md: md0 stopped.
[   51.204845] md: bind<sata4p1>
[   51.208324] md: bind<sata1p1>
[   51.211788] md: bind<sata2p1>
[   51.215295] md: bind<sata3p1>
[   51.218900] md/raid1:md0: active with 4 out of 4 mirrors
[   51.246528] md0: detected capacity change from 0 to 2549940224
[   52.203180] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   52.239125] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   56.552565] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   56.579644] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   56.753117] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities
[   56.779590] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[   56.945517] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[   56.965825] systemd[1]: Detected architecture x86-64.
[   56.979197] systemd[1]: Set hostname to <TUN_MPS_NAS>.
[   57.686105] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory.
[   57.706153] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory.
[   57.727311] systemd[1]: Reached target Swap.
[   57.735972] systemd[1]: Starting Swap.
[   57.740451] systemd[1]: Created slice Root Slice.
[   57.750081] systemd[1]: Starting Root Slice.
[   57.754933] systemd[1]: Listening on Journal Socket.
[   57.765158] systemd[1]: Starting Journal Socket.
[   57.770448] systemd[1]: Created slice Task Scheduler Group.
[   57.782016] systemd[1]: Starting Task Scheduler Group.
[   57.787863] systemd[1]: Created slice Synology Index slice (WAT).
[   57.800597] systemd[1]: Starting Synology Index slice (WAT).
[   57.807020] systemd[1]: Created slice dsm6-ui-compatible's slice.
[   57.819753] systemd[1]: Starting dsm6-ui-compatible's slice.
[   57.826177] systemd[1]: Created slice HybridShare's slice.
[   57.837553] systemd[1]: Starting HybridShare's slice.
[   57.843300] systemd[1]: Created slice BTRFS Space Reclaim.
[   57.854673] systemd[1]: Starting BTRFS Space Reclaim.
[   57.860429] systemd[1]: Created slice User and Session Slice.
[   57.872388] systemd[1]: Starting User and Session Slice.
[   57.878425] systemd[1]: Created slice OAuthService's slice.
[   57.889992] systemd[1]: Starting OAuthService's slice.
[   57.895833] systemd[1]: Created slice SNMP.
[   57.904297] systemd[1]: Starting SNMP.
[   57.908589] systemd[1]: Created slice Synology Cache Advisor.
[   57.920547] systemd[1]: Starting Synology Cache Advisor.
[   57.926582] systemd[1]: Created slice SynoFinder's slice.
[   57.937764] systemd[1]: Starting SynoFinder's slice.
[   57.943399] systemd[1]: Listening on Journal Audit Socket.
[   57.954773] systemd[1]: Starting Journal Audit Socket.
[   57.960559] systemd[1]: Listening on udev Kernel Socket.
[   57.971548] systemd[1]: Starting udev Kernel Socket.
[   57.977117] systemd[1]: Reached target Paths.
[   57.985967] systemd[1]: Starting Paths.
[   57.990364] systemd[1]: Created slice ActiveInsight's slice.
[   58.002121] systemd[1]: Starting ActiveInsight's slice.
[   58.008081] systemd[1]: Created slice SecureSignIn's slice.
[   58.019649] systemd[1]: Starting SecureSignIn's slice.
[   58.025499] systemd[1]: Created slice BTRFS Optimization.
[   58.036679] systemd[1]: Starting BTRFS Optimization.
[   58.042325] systemd[1]: Created slice Shared Folder Sync.
[   58.053509] systemd[1]: Starting Shared Folder Sync.
[   58.059161] systemd[1]: Created slice scemd.
[   58.067809] systemd[1]: Starting scemd.
[   58.072206] systemd[1]: Created slice System Slice.
[   58.082235] systemd[1]: Starting System Slice.
[   58.094561] systemd[1]: Starting Disabling fan checking flag ......
[   58.102351] systemd[1]: Mounting Temporary Directory...
[   58.113271] systemd[1]: Starting Synology swap...
[   58.122771] systemd[1]: Starting unbind USB device...
[   58.132058] systemd[1]: Starting Set hostname...
[   58.141006] systemd[1]: Started Machine Check Exception Logging Daemon.
[   58.151259] systemd[1]: Starting Machine Check Exception Logging Daemon...
[   58.165301] systemd[1]: Created slice Performance alarm.
[   58.177233] systemd[1]: Starting Performance alarm.
[   58.187857] systemd[1]: Created slice aqc111's slice.
[   58.198260] systemd[1]: Starting aqc111's slice.
[   58.204567] systemd[1]: Starting Load Kernel Modules...
[   58.210577] systemd[1]: Created slice Synology DSM internal service.
[   58.221663] systemd[1]: Starting Synology DSM internal service.
[   58.235076] systemd[1]: Mounting Debug File System...
[   58.240951] systemd[1]: Created slice SMBService's slice.
[   58.250712] systemd[1]: Starting SMBService's slice.
[   58.261521] systemd[1]: Created slice Synology DSM Storage Service.
[   58.274678] systemd[1]: Starting Synology DSM Storage Service.
[   58.281470] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   58.294591] systemd[1]: Starting system-serial\x2dgetty.slice.
[   58.295041] Monitor-Mwait will be used to enter C-1 state
[   58.295054] Monitor-Mwait will be used to enter C-2 state
[   58.295065] Monitor-Mwait will be used to enter C-3 state
[   58.295083] ACPI: acpi_idle registered with cpuidle
[   58.301910] systemd[1]: Starting Journal Socket (/dev/log).
[   58.308326] systemd[1]: Created slice Python2's slice.
[   58.318940] systemd[1]: Starting Python2's slice.
[   58.324334] systemd[1]: Created slice Synology DSM desktop service.
[   58.337480] systemd[1]: Starting Synology DSM desktop service.
[   58.339409] zram: Added device: zram0
[   58.339613] zram: Added device: zram1
[   58.339821] zram: Added device: zram2
[   58.340062] zram: Added device: zram3
[   58.360617] systemd[1]: Created slice ScsiTarget's slice.
[   58.366667] systemd[1]: Starting ScsiTarget's slice.
[   58.372348] systemd[1]: Created slice SSDP service.
[   58.382847] systemd[1]: Starting SSDP service.
[   58.391661] systemd[1]: Starting Link coredump path to volume if possible...
[   58.392215] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
[   58.410509] systemd[1]: Starting Synology Task Scheduler Init...
[   58.417195] flashcache: flashcache-1.0-2021-10-18-20:18 initialized
[   58.428096] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2021-10-18-20:18-debug initialized
[   58.440196] systemd[1]: Starting Load ntb_brd module...
[   58.450458] systemd[1]: Created slice Synology Flashcache.
[   58.454908] NET: Registered protocol family 10
[   58.462960] sit: IPv6 over IPv4 tunneling driver
[   58.470432] md: md1 stopped.
[   58.479126] systemd[1]: Starting Synology Flashcache.
[   58.484897] systemd[1]: Listening on udev Control Socket.
[   58.496159] systemd[1]: Starting udev Control Socket.
[   58.501889] systemd[1]: Reached target Timers.
[   58.510962] systemd[1]: Starting Timers.
[   58.516795] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   58.522857] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   58.528896] sd 3:0:0:0: Attached scsi generic sg2 type 0
[   58.529716] systemd[1]: Starting Set boot sequence config...
[   58.541286] systemd[1]: Reached target Slices.
[   58.541295] sd 4:0:0:0: Attached scsi generic sg3 type 0
[   58.556748] systemd[1]: Starting Slices.
[   58.557567] md: bind<sata4p2>
[   58.557734] md: bind<sata1p2>
[   58.557868] md: bind<sata2p2>
[   58.561560] r8168 Gigabit Ethernet driver 8.045.12-NAPI loaded
[   58.561577] r8168 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   58.567673]  Reinit 1 8001
[   58.567686]  Reinit 2 1
[   58.577372]  Reinit 1 8001
[   58.577385]  Reinit 2 1
[   58.577965] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[   58.577972] r8168  Copyright (C) 2017  Realtek NIC software team <[email protected]>
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[   58.577983] r8168 Gigabit Ethernet driver 8.045.12-NAPI loaded
[   58.577992] r8168 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   58.584020]  Reinit 1 8001
[   58.584033]  Reinit 2 1
[   58.593717]  Reinit 1 8001
[   58.593730]  Reinit 2 1
[   58.594256] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[   58.594258] r8168  Copyright (C) 2017  Realtek NIC software team <[email protected]>
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[   58.597468] usb-storage 1-4:1.0: USB Mass Storage device detected
[   58.597622] scsi host6: usb-storage 1-4:1.0
[   58.597719] usbcore: registered new interface driver usb-storage
[   58.599239] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   58.600057] ehci-pci: EHCI PCI platform driver
[   58.601263] uhci_hcd: USB Universal Host Controller Interface driver
[   58.679806] [drm] GuC: No firmware known for this platform!
[   58.679807] [drm] HuC: No firmware known for this platform!
[   58.723782] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   58.723782] [drm] Driver supports precise vblank timestamp query.
[   58.723932] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   58.725094] md: bind<sata3p2>
[   58.726205] md/raid1:md1: active with 4 out of 4 mirrors
[   58.739503] [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
[   58.748731] md1: detected capacity change from 0 to 2147418112
[   58.822784] systemd[1]: Created slice Synology Swap Works.
[   58.834193] systemd[1]: Starting Synology Swap Works.
[   58.839979] systemd[1]: Created slice QuickConnect synorelayd group.
[   58.853303] systemd[1]: Starting QuickConnect synorelayd group.
[   58.860202] systemd[1]: Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[   58.875887] systemd[1]: Starting system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[   58.886956] systemd[1]: Created slice OpenBSD Secure Shell server.
[   58.899896] systemd[1]: Starting OpenBSD Secure Shell server.
[   58.906446] systemd[1]: Created slice Package Center Slice.
[   58.918021] systemd[1]: Starting Package Center Slice.
[   58.923966] systemd[1]: Created slice synobackup daemon slice.
[   58.936213] systemd[1]: Starting synobackup daemon slice.
[   58.946686] systemd[1]: Starting check integrity of rd.gz decompression...
[   58.954831] systemd[1]: Created slice FileStation's slice.
[   58.966720] systemd[1]: Starting FileStation's slice.
[   58.978312] systemd[1]: Starting Set time zone information to kernel...
[   58.985960] systemd[1]: Created slice RAID Resync Process. Including Resync, Repair and Reshape..
[   59.001417] systemd[1]: Starting RAID Resync Process. Including Resync, Repair and Reshape..
[   59.017856] systemd[1]: Mounted Debug File System.
[   59.025005] systemd[1]: Mounted Temporary Directory.
[   59.035252] systemd[1]: Started Disabling fan checking flag ....
[   59.046673] systemd[1]: Started unbind USB device.
[   59.057779] systemd[1]: Started Set hostname.
[   59.067055] systemd[1]: Listening on Journal Socket (/dev/log).
[   59.077758] systemd[1]: Started Link coredump path to volume if possible.
[   59.091085] systemd[1]: Started Synology Task Scheduler Init.
[   59.103677] systemd[1]: Started Load ntb_brd module.
[   59.115250] systemd[1]: Started Set boot sequence config.
[   59.125991] systemd[1]: Started check integrity of rd.gz decompression.
[   59.138580] systemd[1]: Started Set time zone information to kernel.
[   59.151669] systemd[1]: Reached target Sockets.
[   59.162850] systemd[1]: Starting Sockets.
[   59.176915] systemd[1]: Starting Journal Service...
[   59.182458] systemd[1]: Reached target Local File Systems.
[   59.192284] systemd[1]: Starting Local File Systems.
[   59.203646] systemd[1]: Starting D-Bus Session Message Bus...
[   59.210819] systemd[1]: Starting Set boot sequence config for temporary use...
[   59.223514] systemd[1]: Starting D-Bus System Message Bus...
[   59.236192] systemd[1]: Starting udev Coldplug all Devices...
[   59.242007] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k
[   59.242931] zram0: detected capacity change from 0 to 592445440
[   59.246219] Adding 578556k swap on /dev/zram0.  Priority:1 extents:1 across:578556k SS
[   59.246834] zram1: detected capacity change from 0 to 592445440
[   59.250105] Adding 578556k swap on /dev/zram1.  Priority:1 extents:1 across:578556k SS
[   59.250751] zram2: detected capacity change from 0 to 592445440
[   59.254034] Adding 578556k swap on /dev/zram2.  Priority:1 extents:1 across:578556k SS
[   59.254664] zram3: detected capacity change from 0 to 592445440
[   59.257929] Adding 578556k swap on /dev/zram3.  Priority:1 extents:1 across:578556k SS
[   59.317864] systemd[1]: Starting Open vSwitch database server...
[   59.329230] systemd[1]: Starting Mount usb fs...
[   59.343750] systemd[1]: Started Journal Service.
[   59.348475] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   59.380133] systemd-journald[5557]: Received request to flush runtime journal from PID 1
[   59.393240] gre: GRE over IPv4 demultiplexor driver
[   59.415283] openvswitch: Open vSwitch switching datapath
[   59.601072] scsi 6:0:0:0: Direct-Access     Synology DiskStation              DL17 PQ: 0 ANSI: 6
[   59.615855] sd 6:0:0:0: Attached scsi generic sg4 type 0
[   59.626777] sd 6:0:0:0: [synoboot] 245760 512-byte logical blocks: (126 MB/120 MiB)
[   59.641660] sd 6:0:0:0: [synoboot] Write Protect is off
[   59.650930] sd 6:0:0:0: [synoboot] Mode Sense: 23 00 00 00
[   59.651788] sd 6:0:0:0: [synoboot] No Caching mode page found
[   59.663603] sd 6:0:0:0: [synoboot] Assuming drive cache: write through
[   59.677640] [drm:intel_dp_aux_ch [i915]] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
[   59.683348] GPT:Primary header thinks Alt. header is not at the end of the disk.
[   59.683349] GPT:239649 != 245759
[   59.683350] GPT:Alternate GPT header not at the end of the disk.
[   59.683351] GPT:239649 != 245759
[   59.683351] GPT: Use GNU Parted to correct GPT errors.
[   59.683358]  synoboot: synoboot1 synoboot2
[   59.695427] sd 6:0:0:0: [synoboot] Attached SCSI disk
[   59.871630] [drm] failed to retrieve link info, disabling eDP
[   59.885576] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[   59.894514] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   59.902836] acpi device:50: registered as cooling_device4
[   59.908951] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input0
[   59.919262] evbug: Connected device: input0 (Video Bus at LNXVIDEO/video/input0)
[   59.920564] [drm] Cannot find any crtc or sizes
[   59.926588] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   59.966937] usbcore: registered new interface driver usblp
[   59.974721] r8168 0000:03:00.0 eth5: renamed from eth1
[   59.991868] r8168 0000:02:00.0 eth1: renamed from eth0
[   60.006889] r8168 0000:03:00.0 eth0: renamed from eth5
[   60.014179] usbcore: registered new interface driver usbhid
[   60.025607] usbhid: USB HID core driver
[   60.063780] synobios open /dev/ttyS1 success
[   60.080905] correction with 0x00
[   60.085575] 2021-11-5 14:20:26 UTC
[   60.089376] synobios: load, major number 201
[   60.094151] Brand: Synology
[   60.097273] Model: DS-920+
[   60.100297] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   60.109743] synobios cpu_arch proc entry initialized
[   60.115292] synobios crypto_hw proc entry initialized
[   60.120936] synobios syno_platform proc entry initialized
[   60.150482] Syno_HddMon: Initialization completed.
[   60.216904] SSE version of gcm_enc/dec engaged.
[   62.408825] device ovs-system entered promiscuous mode
[   62.414637] audit: type=1700 audit(1636122028.328:2): dev=ovs-system prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[   62.432702] device ovs_bond0 entered promiscuous mode
[   62.438378] audit: type=1700 audit(1636122028.352:3): dev=ovs_bond0 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[   62.515932] device eth1 entered promiscuous mode
[   62.521111] audit: type=1700 audit(1636122028.435:4): dev=eth1 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[   62.534074] device eth0 entered promiscuous mode
[   62.539243] audit: type=1700 audit(1636122028.453:5): dev=eth0 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[   62.563171] IPv6: ADDRCONF(NETDEV_UP): ovs_bond0: link is not ready
[   63.875927] md: md2 stopped.
[   63.902900] md: bind<sata4p3>
[   63.906478] md: bind<sata1p3>
[   63.910061] md: bind<sata2p3>
[   63.930068] md: bind<sata3p3>
[   63.944775] md: raid10 personality registered for level 10
[   63.951524] md/raid10:md2: active with 4 out of 4 devices
[   63.972733] md2: detected capacity change from 0 to 7991698522112
[   65.015748] flashcache_syno: /dev/vg1/volume_1 exclude check success
[   65.496952] raid6: sse2x1   gen()  4566 MB/s
[   65.517947] raid6: sse2x1   xor()  3054 MB/s
[   65.538950] raid6: sse2x2   gen()  5675 MB/s
[   65.559944] raid6: sse2x2   xor()  3576 MB/s
[   65.576617] eth0: 0xffffc9000041e000, 00:11:32:ca:fa:1d, IRQ 345
[   65.580950] raid6: sse2x4   gen()  6347 MB/s
[   65.593853]  Reinit 1 8001
[   65.596978]  Reinit 2 1
[   65.597945] raid6: sse2x4   xor()  2617 MB/s
[   65.597946] raid6: using algorithm sse2x4 gen() 6347 MB/s
[   65.597947] raid6: .... xor() 2617 MB/s, rmw enabled
[   65.597948] raid6: using ssse3x2 recovery algorithm
[   65.609721] xor: measuring software checksum speed
[   65.618946]    prefetch64-sse:  7408.000 MB/sec
[   65.628946]    generic_sse:  6608.000 MB/sec
[   65.628947] xor: using function: prefetch64-sse (7408.000 MB/sec)
[   65.653267]  Reinit 1 8001
[   65.656394]  Reinit 2 1
[   65.669394]  Reinit 1 8001
[   65.672523]  Reinit 2 1
[   65.686532] Btrfs loaded, crc32c=crc32c-intel
[   65.691958] BTRFS: device label 2021.10.27-21:31:47 v41890 devid 1 transid 843 /dev/mapper/cachedev_0
[   65.703107] BTRFS info (device dm-2): enabling auto syno reclaim space
[   65.704682] eth1: 0xffffc9000011e000, 00:11:32:ca:fa:1e, IRQ 344
[   65.710425]  Reinit 1 8001
[   65.710438]  Reinit 2 1
[   65.720134]  Reinit 1 8001
[   65.720146]  Reinit 2 1
[   65.729215] BTRFS info (device dm-2): use ssd allocation scheme
[   65.729219] BTRFS info (device dm-2): using free space tree
[   65.729220] BTRFS info (device dm-2): using free block group cache tree
[   65.729222] BTRFS info (device dm-2): has skinny extents
[   65.730313]  Reinit 1 8001
[   65.730327]  Reinit 2 1
[   67.799702] loop: module loaded
[   68.407568] Synotify use 16384 event queue size
[   68.412677] Synotify use 16384 event queue size
[   68.950786] capability: warning: `nginx' uses 32-bit capabilities (legacy support in use)
[   69.029750] ata1.00 (slot 3): disabling queued TRIM support
[   69.043377] ata1.00 (slot 3): disabling queued TRIM support
[   69.043388] ata1.00 (slot 3): configured for UDMA/133
[   69.049075] ata1 (slot 3): EH complete
[   69.248076] ata2.00 (slot 4): disabling queued TRIM support
[   69.261765] ata2.00 (slot 4): disabling queued TRIM support
[   69.261777] ata2.00 (slot 4): configured for UDMA/133
[   69.267480] ata2 (slot 4): EH complete
[   69.393200] ata4.00 (slot 1): disabling queued TRIM support
[   69.406863] ata4.00 (slot 1): disabling queued TRIM support
[   69.406869] ata4.00 (slot 1): configured for UDMA/133
[   69.412524] ata4 (slot 1): EH complete
[   69.501549] ata5.00 (slot 2): disabling queued TRIM support
[   69.515171] ata5.00 (slot 2): disabling queued TRIM support
[   69.515182] ata5.00 (slot 2): configured for UDMA/133
[   69.520855] ata5 (slot 2): EH complete
[   69.715593]  Reinit 1 8001
[   69.718721]  Reinit 2 1
[   69.728747] r8168: eth0: link up 1 Gbps
[   69.733389] IPv6: ADDRCONF(NETDEV_CHANGE): ovs_bond0: link becomes ready
[   69.771628]  Reinit 1 8001
[   69.774755]  Reinit 2 1
[   69.784776] r8168: eth1: link up 1 Gbps
[   69.930190] ext2: synoboot2 mounted, process=synopkicompatsy
[   69.995528] synoboot2 unmounted, process=synopkicompatsy
[   70.711124] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(001132cafa1e).
[   70.739027] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
[   70.768007] iSCSI:target_core_device.c:613:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[   70.781263] iSCSI:target_core_configfs.c:5446:target_init_dbroot db_root: cannot open: /etc/target
[   70.791403] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[   70.852287] iSCSI:target_core_file.c:149:fd_attach_hba RODSP plugin for fileio is enabled.
[   70.861533] iSCSI:target_core_file.c:156:fd_attach_hba ODX Token Manager is enabled.
[   70.870204] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
[   70.880230] iSCSI:target_core_ep.c:795:ep_attach_hba RODSP plugin for epio is enabled.
[   70.889074] iSCSI:target_core_ep.c:802:ep_attach_hba ODX Token Manager is enabled.
[   70.942063] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: 10.8.32.9:3260 on (null)
[   70.953748] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: [fe80::211:32ff:feca:fa1d]:3260 on (null)
[   71.012127] iSCSI:target_core_configfs.c:5393:volume_make_item load filesystem_stat on volume(volume1)
[   71.025734] iSCSI:target_core_file.c:603:fd_init_rod Load FD-ROD Buffer(/volume1/@iSCSI/LUN/BLUN_THICK/5aa0ca09-4184-49f8-aa09-94f8f42a3a8c/ROD)
[   71.040387] iSCSI:target_core_rodsp_server.c:156:rodsp_server_sink_register SINK-REG(5aa0ca09-4184-49f8-aa09-94f8f42a3a8c)
[   71.052822] iSCSI:target_core_configfs.c:2791:target_dev_enable_store process [10360] '/var/packages/ScsiTarget/target/bin/synoiscsiep --startall iscsi' successfully loaded LUN(fileio/LUN_5aa0ca09-4184-49f8-aa09-94f8f42a3a8c), uuid(5aa0ca09-4184-49f8-aa09-94f8f42a3a8c), control(fd_dev_name=/volume1/@iSCSI/LUN/BLUN_THICK/5aa0ca09-4184-49f8-aa09-94f8f42a3a8c/MPSLocalStrorage_00000,fd_dev_size=3221225472000,thin_provision=0,block_size=512,enable_sink=5aa0ca09-4184-49f8-aa09-94f8f42a3a8c,fd_async_io=1,fd_rod_path=/volume1/@iSCSI/LUN/BLUN_THICK/5aa0ca09-4184-49f8-aa09-94f8f42a3a8c/ROD)
[   71.111337] iSCSI:target_core_configfs.c:1105:emulate_fua_write_store [fileio/MPSLocalStrorage/5aa0ca09-4184-49f8-aa09-94f8f42a3a8c] exec_fua_write: 0
[   71.131097] iSCSI:iscsi_target.c:448:start_all_np iSCSI Network Portal started successfully 10.8.32.9:3260
[   71.141955] iSCSI:iscsi_target.c:448:start_all_np iSCSI Network Portal started successfully [fe80::211:32ff:feca:fa1d]:3260
[   71.264641] workqueue: max_active 1024 requested for vhost_scsi is out of range, clamping between 1 and 512
[   72.010633] ext2: synoboot1 mounted, process=syno_bios_log_c
[   72.059216] 8021q: 802.1Q VLAN Support v1.8
[   72.088898] vfat: synoboot1 mounted, process=syno_bios_log_c
[   72.170294] synoboot1 unmounted, process=syno_bios_log_c
[   72.433943] mii: module verification failed: signature and/or required key missing - tainting kernel
[   72.532118] usbcore: registered new interface driver aqc111
[   72.546281] aqc111 2-1:1.0 eth2: register 'aqc111' at usb-0000:00:15.0-1, QNAP QNA-UC5G1T USB to 5GbE Adapter, 24:5e:be:65:08:c3
[   75.211884] fuse init (API version 7.23)
[   78.916152] ip_tables: (C) 2000-2006 Netfilter Core Team
[   78.937412] audit: type=1325 audit(1636122044.850:6): table=filter family=2 entries=0
[   79.035641] audit: type=1325 audit(1636122044.948:7): table=filter family=2 entries=4
[   79.050101] audit: type=1325 audit(1636122044.963:8): table=filter family=2 entries=8
[   79.142191] audit: type=1325 audit(1636122045.055:9): table=filter family=2 entries=9
[  118.590180] audit: type=1325 audit(1636122085.615:10): table=filter family=2 entries=10
[  118.604691] audit: type=1325 audit(1636122085.630:11): table=filter family=2 entries=9
[  118.629735] Module [xt_recent] is removed.
[  118.655043] Module [xt_iprange] is removed.
[  118.670943] Module [xt_limit] is removed.
[  118.686892] Module [xt_state] is removed.
[  118.707328] Module [xt_multiport] is removed.
[  118.735436] Module [xt_LOG] is removed.
[  118.751847] Module [nf_conntrack_ipv4] is removed.
[  118.816185] Module [nf_defrag_ipv4] is removed.
[  118.846725] audit: type=1325 audit(1636122085.872:12): table=filter family=2 entries=8
[  171.938525] Module [aqc111] is removed.
[  171.942915] usbcore: deregistering interface driver aqc111
[  171.949071] aqc111 2-1:1.0 eth2: unregister 'aqc111' usb-0000:00:15.0-1, QNAP QNA-UC5G1T USB to 5GbE Adapter
[  171.980445] Module [usbnet] is removed.
[  171.991375] Module [mii] is removed.
[  174.772472] aqc111 2-1:1.0 eth2: register 'aqc111' at usb-0000:00:15.0-1, QNAP QNA-UC5G1T USB to 5GbE Adapter, 24:5e:be:65:08:c3
[  174.785442] usbcore: registered new interface driver aqc111
[  175.028100] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[  181.400096] aqc111 2-1:1.0 eth2: Link Speed 1000, USB 3
[  181.423760] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[  183.535537] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: 10.8.32.49:3260 on iSCSI/TCP
[  183.547591] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: [fe80::265e:beff:fe65:8c3]:3260 on iSCSI/TCP
[  186.586893] audit: type=1325 audit(1636122153.608:13): table=nat family=2 entries=0
[  192.459196] audit: type=1325 audit(1636122159.479:14): table=filter family=2 entries=4
[  192.474191] audit: type=1325 audit(1636122159.494:15): table=filter family=2 entries=8
[  192.567921] audit: type=1325 audit(1636122159.588:16): table=filter family=2 entries=9
[  233.686991] audit: type=1325 audit(1636122200.705:17): table=filter family=2 entries=10
[  233.701571] audit: type=1325 audit(1636122200.719:18): table=filter family=2 entries=9
[  233.727773] Module [xt_recent] is removed.
[  233.748271] Module [xt_iprange] is removed.
[  233.764664] Module [xt_limit] is removed.
[  233.781039] Module [xt_state] is removed.
[  233.802341] Module [xt_multiport] is removed.
[  233.826400] Module [xt_LOG] is removed.
[  233.866693] audit: type=1325 audit(1636122200.884:19): table=filter family=2 entries=8
[ 5866.754389] ata4 (slot 1): wake up from deepsleep, reset link now
[ 5866.754444] ata2 (slot 4): wake up from deepsleep, reset link now
[ 5867.070573] ata4: device plugged sstatus 0x133
[ 5867.079025] ata2: device plugged sstatus 0x1
[ 5875.483672] ata2 (slot 4): link is slow to respond, please be patient (ready=0)
[ 5875.542788] ata4 (slot 1): link is slow to respond, please be patient (ready=0)
[ 5877.754605] ata1 (slot 3): wake up from deepsleep, reset link now
[ 5878.078334] ata1: device plugged sstatus 0x1
[ 5879.932716] ata2 (slot 4): softreset failed (device not ready)
[ 5879.938697] ata4 (slot 1): softreset failed (device not ready)
[ 5879.938700] ata4 (slot 1): SRST fail, set srst fail flag
[ 5879.951702] ata2 (slot 4): SRST fail, set srst fail flag
[ 5880.838775] ata2 (slot 4): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5880.846577] ata2 (slot 4): link reset sucessfully clear error flags
[ 5880.900112] ata2.00 (slot 4): disabling queued TRIM support
[ 5880.914145] ata2.00 (slot 4): disabling queued TRIM support
[ 5880.914162] ata2.00 (slot 4): configured for UDMA/133
[ 5880.919830] ata2 (slot 4): wake up successful, the reset fail can be ignored
[ 5881.827854] ata4 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5881.835659] ata4 (slot 1): link reset sucessfully clear error flags
[ 5881.861114] ata4.00 (slot 1): disabling queued TRIM support
[ 5881.875353] ata4.00 (slot 1): disabling queued TRIM support
[ 5881.875374] ata4.00 (slot 1): configured for UDMA/133
[ 5881.881055] ata4 (slot 1): wake up successful, the reset fail can be ignored
[ 5886.541311] ata1 (slot 3): link is slow to respond, please be patient (ready=0)
[ 5888.814414] ata5 (slot 2): wake up from deepsleep, reset link now
[ 5889.128827] ata5: device plugged sstatus 0x133
[ 5890.939325] ata1 (slot 3): softreset failed (device not ready)
[ 5890.945862] ata1 (slot 3): SRST fail, set srst fail flag
[ 5892.700643] ata1 (slot 3): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5892.708458] ata1 (slot 3): link reset sucessfully clear error flags
[ 5892.751971] ata1.00 (slot 3): disabling queued TRIM support
[ 5892.765806] ata1.00 (slot 3): disabling queued TRIM support
[ 5892.765823] ata1.00 (slot 3): configured for UDMA/133
[ 5892.771500] ata1 (slot 3): wake up successful, the reset fail can be ignored
[ 5897.593927] ata5 (slot 2): link is slow to respond, please be patient (ready=0)
[ 5901.989154] ata5 (slot 2): softreset failed (device not ready)
[ 5901.995695] ata5 (slot 2): SRST fail, set srst fail flag
[ 5904.042304] ata5 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5904.050105] ata5 (slot 2): link reset sucessfully clear error flags
[ 5904.075589] ata5.00 (slot 2): disabling queued TRIM support
[ 5904.089985] ata5.00 (slot 2): disabling queued TRIM support
[ 5904.090056] ata5.00 (slot 2): configured for UDMA/133
[ 5904.095720] ata5 (slot 2): wake up successful, the reset fail can be ignored
[ 8559.458622] ata4 (slot 1): wake up from deepsleep, reset link now
[ 8559.458657] ata2 (slot 4): wake up from deepsleep, reset link now
[ 8559.776143] ata4: device plugged sstatus 0x133
[ 8559.784166] ata2: device plugged sstatus 0x1
[ 8568.188828] ata2 (slot 4): link is slow to respond, please be patient (ready=0)
[ 8568.247861] ata4 (slot 1): link is slow to respond, please be patient (ready=0)
[ 8570.459009] ata5 (slot 2): wake up from deepsleep, reset link now
[ 8570.769962] ata5: device plugged sstatus 0x133
[ 8572.638859] ata2 (slot 4): softreset failed (device not ready)
[ 8572.645396] ata2 (slot 4): SRST fail, set srst fail flag
[ 8572.645430] ata4 (slot 1): softreset failed (device not ready)
[ 8572.645432] ata4 (slot 1): SRST fail, set srst fail flag
[ 8573.546142] ata2 (slot 4): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8573.553956] ata2 (slot 4): link reset sucessfully clear error flags
[ 8573.599075] ata2.00 (slot 4): disabling queued TRIM support
[ 8573.613095] ata2.00 (slot 4): disabling queued TRIM support
[ 8573.613112] ata2.00 (slot 4): configured for UDMA/133
[ 8573.618792] ata2 (slot 4): wake up successful, the reset fail can be ignored
[ 8574.537218] ata4 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8574.545063] ata4 (slot 1): link reset sucessfully clear error flags
[ 8574.570886] ata4.00 (slot 1): disabling queued TRIM support
[ 8574.585338] ata4.00 (slot 1): disabling queued TRIM support
[ 8574.585361] ata4.00 (slot 1): configured for UDMA/133
[ 8574.591041] ata4 (slot 1): wake up successful, the reset fail can be ignored
[ 8579.244437] ata5 (slot 2): link is slow to respond, please be patient (ready=0)
[ 8581.459606] ata1 (slot 3): wake up from deepsleep, reset link now
[ 8581.783558] ata1: device plugged sstatus 0x1
[ 8583.638465] ata5 (slot 2): softreset failed (device not ready)
[ 8583.644998] ata5 (slot 2): SRST fail, set srst fail flag
[ 8585.664606] ata5 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8585.672402] ata5 (slot 2): link reset sucessfully clear error flags
[ 8585.705630] ata5.00 (slot 2): disabling queued TRIM support
[ 8585.719537] ata5.00 (slot 2): disabling queued TRIM support
[ 8585.719553] ata5.00 (slot 2): configured for UDMA/133
[ 8585.725223] ata5 (slot 2): wake up successful, the reset fail can be ignored
[ 8590.196876] ata1 (slot 3): link is slow to respond, please be patient (ready=0)
[ 8594.647075] ata1 (slot 3): softreset failed (device not ready)
[ 8594.653614] ata1 (slot 3): SRST fail, set srst fail flag
[ 8596.457229] ata1 (slot 3): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8596.465035] ata1 (slot 3): link reset sucessfully clear error flags
[ 8596.497868] ata1.00 (slot 3): disabling queued TRIM support
[ 8596.511720] ata1.00 (slot 3): disabling queued TRIM support
[ 8596.511736] ata1.00 (slot 3): configured for UDMA/133
[ 8596.517413] ata1 (slot 3): wake up successful, the reset fail can be ignored
[14279.789501] ata4 (slot 1): wake up from deepsleep, reset link now
[14279.789622] ata2 (slot 4): wake up from deepsleep, reset link now
[14280.106704] ata4: device plugged sstatus 0x133
[14280.113518] ata2: device plugged sstatus 0x133
[14288.569853] ata2 (slot 4): link is slow to respond, please be patient (ready=0)
[14288.576600] ata4 (slot 1): link is slow to respond, please be patient (ready=0)
[14290.789949] ata1 (slot 3): wake up from deepsleep, reset link now
[14291.113257] ata1: device plugged sstatus 0x1
[14292.962840] ata4 (slot 1): softreset failed (device not ready)
[14292.969381] ata4 (slot 1): SRST fail, set srst fail flag
[14292.975852] ata2 (slot 4): softreset failed (device not ready)
[14292.982388] ata2 (slot 4): SRST fail, set srst fail flag
[14293.870219] ata2 (slot 4): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[14293.878030] ata2 (slot 4): link reset sucessfully clear error flags
[14293.905150] ata2.00 (slot 4): disabling queued TRIM support
[14293.919420] ata2.00 (slot 4): disabling queued TRIM support
[14293.919441] ata2.00 (slot 4): configured for UDMA/133
[14293.925119] ata2 (slot 4): wake up successful, the reset fail can be ignored
[14294.918181] ata4 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[14294.925994] ata4 (slot 1): link reset sucessfully clear error flags
[14294.951556] ata4.00 (slot 1): disabling queued TRIM support
[14294.965813] ata4.00 (slot 1): disabling queued TRIM support
[14294.965837] ata4.00 (slot 1): configured for UDMA/133
[14294.971508] ata4 (slot 1): wake up successful, the reset fail can be ignored
[14299.574437] ata1 (slot 3): link is slow to respond, please be patient (ready=0)
[14301.790583] ata5 (slot 2): wake up from deepsleep, reset link now
[14302.104344] ata5: device plugged sstatus 0x133
[14303.970450] ata1 (slot 3): softreset failed (device not ready)
[14303.976986] ata1 (slot 3): SRST fail, set srst fail flag
[14305.833769] ata1 (slot 3): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[14305.841587] ata1 (slot 3): link reset sucessfully clear error flags
[14305.878598] ata1.00 (slot 3): disabling queued TRIM support
[14305.892558] ata1.00 (slot 3): disabling queued TRIM support
[14305.892575] ata1.00 (slot 3): configured for UDMA/133
[14305.898253] ata1 (slot 3): wake up successful, the reset fail can be ignored
[14310.521785] ata5 (slot 2): link is slow to respond, please be patient (ready=0)
[14314.969310] ata5 (slot 2): softreset failed (device not ready)
[14314.975847] ata5 (slot 2): SRST fail, set srst fail flag
[14317.105421] ata5 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[14317.113224] ata5 (slot 2): link reset sucessfully clear error flags
[14317.140197] ata5.00 (slot 2): disabling queued TRIM support
[14317.154391] ata5.00 (slot 2): disabling queued TRIM support
[14317.154415] ata5.00 (slot 2): configured for UDMA/133
[14317.160093] ata5 (slot 2): wake up successful, the reset fail can be ignored
[15335.136650] perf interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[24530.338344] ata4 (slot 1): wake up from deepsleep, reset link now
[24530.338391] ata2 (slot 4): wake up from deepsleep, reset link now
[24530.648326] ata4: device plugged sstatus 0x133
[24530.662307] ata2: device plugged sstatus 0x1
[24539.115629] ata2 (slot 4): link is slow to respond, please be patient (ready=0)
[24539.124722] ata4 (slot 1): link is slow to respond, please be patient (ready=0)
[24541.338716] ata5 (slot 2): wake up from deepsleep, reset link now
[24541.652215] ata5: device plugged sstatus 0x133
[24543.514639] ata2 (slot 4): softreset failed (device not ready)
[24543.521176] ata2 (slot 4): SRST fail, set srst fail flag
[24543.521215] ata4 (slot 1): softreset failed (device not ready)
[24543.521217] ata4 (slot 1): SRST fail, set srst fail flag
[24544.419950] ata2 (slot 4): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[24544.427784] ata2 (slot 4): link reset sucessfully clear error flags
[24544.454483] ata2.00 (slot 4): disabling queued TRIM support
[24544.468497] ata2.00 (slot 4): disabling queued TRIM support
[24544.468520] ata2.00 (slot 4): configured for UDMA/133
[24544.474194] ata2 (slot 4): wake up successful, the reset fail can be ignored
[24545.440990] ata4 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[24545.448795] ata4 (slot 1): link reset sucessfully clear error flags
[24545.482974] ata4.00 (slot 1): disabling queued TRIM support
[24545.497480] ata4.00 (slot 1): disabling queued TRIM support
[24545.497503] ata4.00 (slot 1): configured for UDMA/133
[24545.503184] ata4 (slot 1): wake up successful, the reset fail can be ignored
[24550.124224] ata5 (slot 2): link is slow to respond, please be patient (ready=0)
[24552.340383] ata1 (slot 3): wake up from deepsleep, reset link now
[24552.663554] ata1: device plugged sstatus 0x133
[24554.524241] ata5 (slot 2): softreset failed (device not ready)
[24554.530775] ata5 (slot 2): SRST fail, set srst fail flag
[24556.479599] ata5 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[24556.487441] ata5 (slot 2): link reset sucessfully clear error flags
[24556.512684] ata5.00 (slot 2): disabling queued TRIM support
[24556.527223] ata5.00 (slot 2): disabling queued TRIM support
[24556.527248] ata5.00 (slot 2): configured for UDMA/133
[24556.532927] ata5 (slot 2): wake up successful, the reset fail can be ignored
[24561.122615] ata1 (slot 3): link is slow to respond, please be patient (ready=0)
[24565.520872] ata1 (slot 3): softreset failed (device not ready)
[24565.527410] ata1 (slot 3): SRST fail, set srst fail flag
[24567.438186] ata1 (slot 3): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[24567.446278] ata1 (slot 3): link reset sucessfully clear error flags
[24567.481527] ata1.00 (slot 3): disabling queued TRIM support
[24567.495432] ata1.00 (slot 3): disabling queued TRIM support
[24567.495448] ata1.00 (slot 3): configured for UDMA/133
[24567.501121] ata1 (slot 3): wake up successful, the reset fail can be ignored
[31257.965801] r8168: eth0: link down
[31257.974992]  Reinit 1 8001
[31257.978113]  Reinit 2 1
[31263.360936] iSCSI:iscsi_target.c:620:iscsit_del_np CORE[0] - Removed Network Portal: 10.8.32.49:3260 on iSCSI/TCP
[31263.375702] iSCSI:iscsi_target.c:620:iscsit_del_np CORE[0] - Removed Network Portal: [fe80::265e:beff:fe65:8c3]:3260 on iSCSI/TCP
[31272.143784] audit: type=1325 audit(1636153237.451:20): table=filter family=2 entries=4
[31272.158263] audit: type=1325 audit(1636153237.465:21): table=filter family=2 entries=8
[31272.250492] audit: type=1325 audit(1636153237.558:22): table=filter family=2 entries=9
[31313.371450] audit: type=1325 audit(1636153278.676:23): table=filter family=2 entries=10
[31313.386023] audit: type=1325 audit(1636153278.691:24): table=filter family=2 entries=9
[31313.411012] Module [xt_recent] is removed.
[31313.437204] Module [xt_iprange] is removed.
[31313.453166] Module [xt_limit] is removed.
[31313.467696] Module [xt_state] is removed.
[31313.487584] Module [xt_multiport] is removed.
[31313.509486] Module [xt_LOG] is removed.
[31313.549825] audit: type=1325 audit(1636153278.855:25): table=filter family=2 entries=8
[60795.342440] ata4 (slot 1): wake up from deepsleep, reset link now
[60795.342474] ata2 (slot 4): wake up from deepsleep, reset link now
[60795.659198] ata4: device plugged sstatus 0x133
[60795.666678] ata2: device plugged sstatus 0x1
[60804.120419] ata2 (slot 4): link is slow to respond, please be patient (ready=0)
[60804.130695] ata4 (slot 1): link is slow to respond, please be patient (ready=0)
[60806.342825] ata5 (slot 2): wake up from deepsleep, reset link now
[60806.652982] ata5: device plugged sstatus 0x133
[60808.518707] ata2 (slot 4): softreset failed (device not ready)
[60808.524695] ata4 (slot 1): softreset failed (device not ready)
[60808.524698] ata4 (slot 1): SRST fail, set srst fail flag
[60808.537695] ata2 (slot 4): SRST fail, set srst fail flag
[60809.425974] ata2 (slot 4): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[60809.433775] ata2 (slot 4): link reset sucessfully clear error flags
[60809.487582] ata2.00 (slot 4): disabling queued TRIM support
[60809.501510] ata2.00 (slot 4): disabling queued TRIM support
[60809.501533] ata2.00 (slot 4): configured for UDMA/133
[60809.507217] ata2 (slot 4): wake up successful, the reset fail can be ignored
[60810.639132] ata4 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[60810.646942] ata4 (slot 1): link reset sucessfully clear error flags
[60810.675482] ata4.00 (slot 1): disabling queued TRIM support
[60810.689539] ata4.00 (slot 1): disabling queued TRIM support
[60810.689562] ata4.00 (slot 1): configured for UDMA/133
[60810.695242] ata4 (slot 1): wake up successful, the reset fail can be ignored
[60815.082082] ata5 (slot 2): link is slow to respond, please be patient (ready=0)
[60817.343244] ata1 (slot 3): wake up from deepsleep, reset link now
[60817.667050] ata1: device plugged sstatus 0x133
[60819.528308] ata5 (slot 2): softreset failed (device not ready)
[60819.534848] ata5 (slot 2): SRST fail, set srst fail flag
[60821.683675] ata5 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[60821.691474] ata5 (slot 2): link reset sucessfully clear error flags
[60821.716747] ata5.00 (slot 2): disabling queued TRIM support
[60821.730848] ata5.00 (slot 2): disabling queued TRIM support
[60821.730865] ata5.00 (slot 2): configured for UDMA/133
[60821.736532] ata5 (slot 2): wake up successful, the reset fail can be ignored
[60826.074883] ata1 (slot 3): link is slow to respond, please be patient (ready=0)
[60830.524938] ata1 (slot 3): softreset failed (device not ready)
[60830.531474] ata1 (slot 3): SRST fail, set srst fail flag
[60832.490043] ata1 (slot 3): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[60832.497843] ata1 (slot 3): link reset sucessfully clear error flags
[60832.532031] ata1.00 (slot 3): disabling queued TRIM support
[60832.546239] ata1.00 (slot 3): disabling queued TRIM support
[60832.546263] ata1.00 (slot 3): configured for UDMA/133
[60832.551942] ata1 (slot 3): wake up successful, the reset fail can be ignored
[65554.598151] ata4 (slot 1): wake up from deepsleep, reset link now
[65554.598189] ata2 (slot 4): wake up from deepsleep, reset link now
[65554.909934] ata4: device plugged sstatus 0x133
[65554.921865] ata2: device plugged sstatus 0x133
[65563.371341] ata2 (slot 4): link is slow to respond, please be patient (ready=0)
[65563.385375] ata4 (slot 1): link is slow to respond, please be patient (ready=0)
[65565.598529] ata1 (slot 3): wake up from deepsleep, reset link now
[65565.921403] ata1: device plugged sstatus 0x133
[65567.771387] ata2 (slot 4): softreset failed (device not ready)
[65567.777919] ata2 (slot 4): SRST fail, set srst fail flag
[65567.780377] ata4 (slot 1): softreset failed (device not ready)
[65567.780379] ata4 (slot 1): SRST fail, set srst fail flag
[65568.678465] ata2 (slot 4): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[65568.686281] ata2 (slot 4): link reset sucessfully clear error flags
[65568.712644] ata2.00 (slot 4): disabling queued TRIM support
[65568.726756] ata2.00 (slot 4): disabling queued TRIM support
[65568.726779] ata2.00 (slot 4): configured for UDMA/133
[65568.732464] ata2 (slot 4): wake up successful, the reset fail can be ignored
[65569.974733] ata4 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[65569.982537] ata4 (slot 1): link reset sucessfully clear error flags
[65570.007871] ata4.00 (slot 1): disabling queued TRIM support
[65570.022001] ata4.00 (slot 1): disabling queued TRIM support
[65570.022024] ata4.00 (slot 1): configured for UDMA/133
[65570.027696] ata4 (slot 1): wake up successful, the reset fail can be ignored
[65574.377830] ata1 (slot 3): link is slow to respond, please be patient (ready=0)
[65576.599097] ata5 (slot 2): wake up from deepsleep, reset link now
[65576.907560] ata5: device plugged sstatus 0x133
[65578.778991] ata1 (slot 3): softreset failed (device not ready)
[65578.785524] ata1 (slot 3): SRST fail, set srst fail flag
[65580.642433] ata1 (slot 3): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[65580.650247] ata1 (slot 3): link reset sucessfully clear error flags
[65580.690215] ata1.00 (slot 3): disabling queued TRIM support
[65580.704643] ata1.00 (slot 3): disabling queued TRIM support
[65580.704667] ata1.00 (slot 3): configured for UDMA/133
[65580.710348] ata1 (slot 3): wake up successful, the reset fail can be ignored
[65585.330572] ata5 (slot 2): link is slow to respond, please be patient (ready=0)
[65589.777627] ata5 (slot 2): softreset failed (device not ready)
[65589.784159] ata5 (slot 2): SRST fail, set srst fail flag
[65591.966942] ata5 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[65591.974753] ata5 (slot 2): link reset sucessfully clear error flags
[65592.009762] ata5.00 (slot 2): disabling queued TRIM support
[65592.023772] ata5.00 (slot 2): disabling queued TRIM support
[65592.023790] ata5.00 (slot 2): configured for UDMA/133
[65592.029465] ata5 (slot 2): wake up successful, the reset fail can be ignored
[69652.118050] perf interrupt took too long (5003 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[76745.216334] ata4 (slot 1): wake up from deepsleep, reset link now
[76745.216351] ata2 (slot 4): wake up from deepsleep, reset link now
[76745.532394] ata4: device plugged sstatus 0x133
[76745.540611] ata2: device plugged sstatus 0x133
[76753.991363] ata2 (slot 4): link is slow to respond, please be patient (ready=0)
[76754.010668] ata4 (slot 1): link is slow to respond, please be patient (ready=0)
[76756.216734] ata5 (slot 2): wake up from deepsleep, reset link now
[76756.526241] ata5: device plugged sstatus 0x133
[76758.390604] ata2 (slot 4): softreset failed (device not ready)
[76758.397141] ata2 (slot 4): SRST fail, set srst fail flag
[76758.405600] ata4 (slot 1): softreset failed (device not ready)
[76758.412130] ata4 (slot 1): SRST fail, set srst fail flag
[76759.289916] ata2 (slot 4): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[76759.297735] ata2 (slot 4): link reset sucessfully clear error flags
[76759.323223] ata2.00 (slot 4): disabling queued TRIM support
[76759.337661] ata2.00 (slot 4): disabling queued TRIM support
[76759.337684] ata2.00 (slot 4): configured for UDMA/133
[76759.343361] ata2 (slot 4): wake up successful, the reset fail can be ignored
[76760.395969] ata4 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[76760.403804] ata4 (slot 1): link reset sucessfully clear error flags
[76760.438031] ata4.00 (slot 1): disabling queued TRIM support
[76760.452631] ata4.00 (slot 1): disabling queued TRIM support
[76760.452774] ata4.00 (slot 1): configured for UDMA/133
[76760.458445] ata4 (slot 1): wake up successful, the reset fail can be ignored
[76764.950207] ata5 (slot 2): link is slow to respond, please be patient (ready=0)
[76767.217367] ata1 (slot 3): wake up from deepsleep, reset link now
[76767.540631] ata1: device plugged sstatus 0x1
[76769.395217] ata5 (slot 2): softreset failed (device not ready)
[76769.401748] ata5 (slot 2): SRST fail, set srst fail flag
[76771.502578] ata5 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[76771.510393] ata5 (slot 2): link reset sucessfully clear error flags
[76771.535895] ata5.00 (slot 2): disabling queued TRIM support
[76771.550385] ata5.00 (slot 2): disabling queued TRIM support
[76771.550408] ata5.00 (slot 2): configured for UDMA/133
[76771.556091] ata5 (slot 2): wake up successful, the reset fail can be ignored
[76776.001881] ata1 (slot 3): link is slow to respond, please be patient (ready=0)
[76780.400045] ata1 (slot 3): softreset failed (device not ready)
[76780.406583] ata1 (slot 3): SRST fail, set srst fail flag
[76782.312147] ata1 (slot 3): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[76782.319947] ata1 (slot 3): link reset sucessfully clear error flags
[76782.353898] ata1.00 (slot 3): disabling queued TRIM support
[76782.368150] ata1.00 (slot 3): disabling queued TRIM support
[76782.368174] ata1.00 (slot 3): configured for UDMA/133
[76782.373858] ata1 (slot 3): wake up successful, the reset fail can be ignored
[86480.760989] ata4 (slot 1): wake up from deepsleep, reset link now
[86480.761036] ata2 (slot 4): wake up from deepsleep, reset link now
[86481.079959] ata4: device plugged sstatus 0x133
[86481.085591] ata2: device plugged sstatus 0x133
[86489.539966] ata2 (slot 4): link is slow to respond, please be patient (ready=0)
[86489.549930] ata4 (slot 1): link is slow to respond, please be patient (ready=0)
[86491.761352] ata1 (slot 3): wake up from deepsleep, reset link now
[86492.085273] ata1: device plugged sstatus 0x133
[86493.943214] ata2 (slot 4): softreset failed (device not ready)
[86493.949753] ata2 (slot 4): SRST fail, set srst fail flag
[86493.955743] ata4 (slot 1): softreset failed (device not ready)
[86493.962279] ata4 (slot 1): SRST fail, set srst fail flag
[86494.839474] ata2 (slot 4): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[86494.847277] ata2 (slot 4): link reset sucessfully clear error flags
[86494.873534] ata2.00 (slot 4): disabling queued TRIM support
[86494.887476] ata2.00 (slot 4): disabling queued TRIM support
[86494.887500] ata2.00 (slot 4): configured for UDMA/133
[86494.893178] ata2 (slot 4): wake up successful, the reset fail can be ignored
[86495.862572] ata4 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[86495.870380] ata4 (slot 1): link reset sucessfully clear error flags
[86495.895850] ata4.00 (slot 1): disabling queued TRIM support
[86495.910233] ata4.00 (slot 1): disabling queued TRIM support
[86495.910304] ata4.00 (slot 1): configured for UDMA/133
[86495.915970] ata4 (slot 1): wake up successful, the reset fail can be ignored
[86500.542794] ata1 (slot 3): link is slow to respond, please be patient (ready=0)
[86502.761915] ata5 (slot 2): wake up from deepsleep, reset link now
[86503.077616] ata5: device plugged sstatus 0x133
[86504.943816] ata1 (slot 3): softreset failed (device not ready)
[86504.950351] ata1 (slot 3): SRST fail, set srst fail flag
[86506.807137] ata1 (slot 3): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[86506.814942] ata1 (slot 3): link reset sucessfully clear error flags
[86506.847478] ata1.00 (slot 3): disabling queued TRIM support
[86506.862084] ata1.00 (slot 3): disabling queued TRIM support
[86506.862108] ata1.00 (slot 3): configured for UDMA/133
[86506.867787] ata1 (slot 3): wake up successful, the reset fail can be ignored
[86511.493402] ata5 (slot 2): link is slow to respond, please be patient (ready=0)
[86515.938434] ata5 (slot 2): softreset failed (device not ready)
[86515.944967] ata5 (slot 2): SRST fail, set srst fail flag
[86518.168796] ata5 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[86518.176607] ata5 (slot 2): link reset sucessfully clear error flags
[86518.202068] ata5.00 (slot 2): disabling queued TRIM support
[86518.216454] ata5.00 (slot 2): disabling queued TRIM support
[86518.216505] ata5.00 (slot 2): configured for UDMA/133
[86518.222200] ata5 (slot 2): wake up successful, the reset fail can be ignored
[106475.861203] ata4 (slot 1): wake up from deepsleep, reset link now
[106475.861239] ata2 (slot 4): wake up from deepsleep, reset link now
[106476.179424] ata4: device plugged sstatus 0x133
[106476.185574] ata2: device plugged sstatus 0x1
[106484.590401] ata2 (slot 4): link is slow to respond, please be patient (ready=0)
[106484.612416] ata4 (slot 1): link is slow to respond, please be patient (ready=0)
[106486.861533] ata1 (slot 3): wake up from deepsleep, reset link now
[106487.185127] ata1: device plugged sstatus 0x133
[106489.039409] ata2 (slot 4): softreset failed (device not ready)
[106489.046057] ata2 (slot 4): SRST fail, set srst fail flag
[106489.057409] ata4 (slot 1): softreset failed (device not ready)
[106489.064040] ata4 (slot 1): SRST fail, set srst fail flag
[106489.933680] ata2 (slot 4): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[106489.941590] ata2 (slot 4): link reset sucessfully clear error flags
[106489.968562] ata2.00 (slot 4): disabling queued TRIM support
[106489.982928] ata2.00 (slot 4): disabling queued TRIM support
[106489.982952] ata2.00 (slot 4): configured for UDMA/133
[106489.988734] ata2 (slot 4): wake up successful, the reset fail can be ignored
[106490.987754] ata4 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[106490.995659] ata4 (slot 1): link reset sucessfully clear error flags
[106491.029614] ata4.00 (slot 1): disabling queued TRIM support
[106491.043911] ata4.00 (slot 1): disabling queued TRIM support
[106491.043933] ata4.00 (slot 1): configured for UDMA/133
[106491.049708] ata4 (slot 1): wake up successful, the reset fail can be ignored
[106495.592998] ata1 (slot 3): link is slow to respond, please be patient (ready=0)
[106497.862130] ata5 (slot 2): wake up from deepsleep, reset link now
[106498.177079] ata5: device plugged sstatus 0x133
[106500.052019] ata1 (slot 3): softreset failed (device not ready)
[106500.058648] ata1 (slot 3): SRST fail, set srst fail flag
[106501.917338] ata1 (slot 3): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[106501.925239] ata1 (slot 3): link reset sucessfully clear error flags
[106501.964616] ata1.00 (slot 3): disabling queued TRIM support
[106501.978620] ata1.00 (slot 3): disabling queued TRIM support
[106501.978644] ata1.00 (slot 3): configured for UDMA/133
[106501.984418] ata1 (slot 3): wake up successful, the reset fail can be ignored
[106506.643594] ata5 (slot 2): link is slow to respond, please be patient (ready=0)
[106511.041832] ata5 (slot 2): softreset failed (device not ready)
[106511.048465] ata5 (slot 2): SRST fail, set srst fail flag
[106513.073979] ata5 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[106513.081879] ata5 (slot 2): link reset sucessfully clear error flags
[106513.115576] ata5.00 (slot 2): disabling queued TRIM support
[106513.129773] ata5.00 (slot 2): disabling queued TRIM support
[106513.129800] ata5.00 (slot 2): configured for UDMA/133
[106513.135574] ata5 (slot 2): wake up successful, the reset fail can be ignored
[117201.445227] ata4 (slot 1): wake up from deepsleep, reset link now
[117201.445358] ata2 (slot 4): wake up from deepsleep, reset link now
[117201.757874] ata4: device plugged sstatus 0x133
[117201.771226] ata2: device plugged sstatus 0x133
[117210.190567] ata4 (slot 1): link is slow to respond, please be patient (ready=0)
[117210.218579] ata2 (slot 4): link is slow to respond, please be patient (ready=0)
[117212.445769] ata1 (slot 3): wake up from deepsleep, reset link now
[117212.770458] ata1: device plugged sstatus 0x133
[117214.618582] ata2 (slot 4): softreset failed (device not ready)
[117214.625211] ata2 (slot 4): SRST fail, set srst fail flag
[117214.636581] ata4 (slot 1): softreset failed (device not ready)
[117214.643207] ata4 (slot 1): SRST fail, set srst fail flag
[117215.512881] ata2 (slot 4): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[117215.520787] ata2 (slot 4): link reset sucessfully clear error flags
[117215.581900] ata2.00 (slot 4): disabling queued TRIM support
[117215.596514] ata2.00 (slot 4): disabling queued TRIM support
[117215.596538] ata2.00 (slot 4): configured for UDMA/133
[117215.602314] ata2 (slot 4): wake up successful, the reset fail can be ignored
[117216.609911] ata4 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[117216.617816] ata4 (slot 1): link reset sucessfully clear error flags
[117216.648242] ata4.00 (slot 1): disabling queued TRIM support
[117216.662587] ata4.00 (slot 1): disabling queued TRIM support
[117216.662610] ata4.00 (slot 1): configured for UDMA/133
[117216.668384] ata4 (slot 1): wake up successful, the reset fail can be ignored
[117221.227173] ata1 (slot 3): link is slow to respond, please be patient (ready=0)
[117223.453041] ata5 (slot 2): wake up from deepsleep, reset link now
[117223.765628] ata5: device plugged sstatus 0x133
[117225.625185] ata1 (slot 3): softreset failed (device not ready)
[117225.631819] ata1 (slot 3): SRST fail, set srst fail flag
[117227.386510] ata1 (slot 3): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[117227.394419] ata1 (slot 3): link reset sucessfully clear error flags
[117227.441282] ata1.00 (slot 3): disabling queued TRIM support
[117227.455695] ata1.00 (slot 3): disabling queued TRIM support
[117227.455718] ata1.00 (slot 3): configured for UDMA/133
[117227.461491] ata1 (slot 3): wake up successful, the reset fail can be ignored
[117232.189761] ata5 (slot 2): link is slow to respond, please be patient (ready=0)
[117236.636006] ata5 (slot 2): softreset failed (device not ready)
[117236.642648] ata5 (slot 2): SRST fail, set srst fail flag
[117238.587124] ata5 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[117238.595039] ata5 (slot 2): link reset sucessfully clear error flags
[117238.620875] ata5.00 (slot 2): disabling queued TRIM support
[117238.635268] ata5.00 (slot 2): disabling queued TRIM support
[117238.635292] ata5.00 (slot 2): configured for UDMA/133
[117238.641075] ata5 (slot 2): wake up successful, the reset fail can be ignored
[119246.565985] ata4 (slot 1): wake up from deepsleep, reset link now
[119246.566020] ata2 (slot 4): wake up from deepsleep, reset link now
[119246.878593] ata4: device plugged sstatus 0x133
[119246.891056] ata2: device plugged sstatus 0x133
[119255.341179] ata2 (slot 4): link is slow to respond, please be patient (ready=0)
[119255.358171] ata4 (slot 1): link is slow to respond, please be patient (ready=0)
[119257.566136] ata1 (slot 3): wake up from deepsleep, reset link now
[119257.890110] ata1: device plugged sstatus 0x1
[119259.740184] ata2 (slot 4): softreset failed (device not ready)
[119259.746817] ata2 (slot 4): SRST fail, set srst fail flag
[119259.752181] ata4 (slot 1): softreset failed (device not ready)
[119259.752184] ata4 (slot 1): SRST fail, set srst fail flag
[119260.647460] ata2 (slot 4): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[119260.655360] ata2 (slot 4): link reset sucessfully clear error flags
[119260.709432] ata2.00 (slot 4): disabling queued TRIM support
[119260.723754] ata2.00 (slot 4): disabling queued TRIM support
[119260.723778] ata2.00 (slot 4): configured for UDMA/133
[119260.729557] ata2 (slot 4): wake up successful, the reset fail can be ignored
[119261.850293] ata4 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[119261.858192] ata4 (slot 1): link reset sucessfully clear error flags
[119261.883688] ata4.00 (slot 1): disabling queued TRIM support
[119261.897639] ata4.00 (slot 1): disabling queued TRIM support
[119261.897663] ata4.00 (slot 1): configured for UDMA/133
[119261.903441] ata4 (slot 1): wake up successful, the reset fail can be ignored
[119266.353580] ata1 (slot 3): link is slow to respond, please be patient (ready=0)
[119268.566928] ata5 (slot 2): wake up from deepsleep, reset link now
[119268.876264] ata5: device plugged sstatus 0x133
[119270.751802] ata1 (slot 3): softreset failed (device not ready)
[119270.758432] ata1 (slot 3): SRST fail, set srst fail flag
[119272.564239] ata1 (slot 3): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[119272.572139] ata1 (slot 3): link reset sucessfully clear error flags
[119272.606247] ata1.00 (slot 3): disabling queued TRIM support
[119272.620760] ata1.00 (slot 3): disabling queued TRIM support
[119272.620784] ata1.00 (slot 3): configured for UDMA/133
[119272.626564] ata1 (slot 3): wake up successful, the reset fail can be ignored
[119277.347367] ata5 (slot 2): link is slow to respond, please be patient (ready=0)
[119281.741628] ata5 (slot 2): softreset failed (device not ready)
[119281.748261] ata5 (slot 2): SRST fail, set srst fail flag
[119283.845770] ata5 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[119283.853704] ata5 (slot 2): link reset sucessfully clear error flags
[119283.879506] ata5.00 (slot 2): disabling queued TRIM support
[119283.893758] ata5.00 (slot 2): disabling queued TRIM support
[119283.893785] ata5.00 (slot 2): configured for UDMA/133
[119283.899550] ata5 (slot 2): wake up successful, the reset fail can be ignored
[144459.952893] ata4 (slot 1): wake up from deepsleep, reset link now
[144459.952915] ata2 (slot 4): wake up from deepsleep, reset link now
[144460.265717] ata4: device plugged sstatus 0x133
[144460.277029] ata2: device plugged sstatus 0x133
[144468.678158] ata2 (slot 4): link is slow to respond, please be patient (ready=0)
[144468.744185] ata4 (slot 1): link is slow to respond, please be patient (ready=0)
[144470.953263] ata5 (slot 2): wake up from deepsleep, reset link now
[144471.269674] ata5: device plugged sstatus 0x133
[144473.127181] ata2 (slot 4): softreset failed (device not ready)
[144473.133814] ata2 (slot 4): SRST fail, set srst fail flag
[144473.139894] ata4 (slot 1): softreset failed (device not ready)
[144473.146532] ata4 (slot 1): SRST fail, set srst fail flag
[144474.031470] ata2 (slot 4): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[144474.039375] ata2 (slot 4): link reset sucessfully clear error flags
[144474.065342] ata2.00 (slot 4): disabling queued TRIM support
[144474.079700] ata2.00 (slot 4): disabling queued TRIM support
[144474.079724] ata2.00 (slot 4): configured for UDMA/133
[144474.085503] ata2 (slot 4): wake up successful, the reset fail can be ignored
[144475.314606] ata4 (slot 1): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[144475.322499] ata4 (slot 1): link reset sucessfully clear error flags
[144475.362413] ata4.00 (slot 1): disabling queued TRIM support
[144475.376386] ata4.00 (slot 1): disabling queued TRIM support
[144475.376410] ata4.00 (slot 1): configured for UDMA/133
[144475.382183] ata4 (slot 1): wake up successful, the reset fail can be ignored
[144479.733743] ata5 (slot 2): link is slow to respond, please be patient (ready=0)
[144481.954849] ata1 (slot 3): wake up from deepsleep, reset link now
[144482.278640] ata1: device plugged sstatus 0x1
[144484.128788] ata5 (slot 2): softreset failed (device not ready)
[144484.135418] ata5 (slot 2): SRST fail, set srst fail flag
[144486.199213] ata5 (slot 2): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[144486.207119] ata5 (slot 2): link reset sucessfully clear error flags
[144486.232761] ata5.00 (slot 2): disabling queued TRIM support
[144486.247200] ata5.00 (slot 2): disabling queued TRIM support
[144486.247224] ata5.00 (slot 2): configured for UDMA/133
[144486.253012] ata5 (slot 2): wake up successful, the reset fail can be ignored
[144490.693432] ata1 (slot 3): link is slow to respond, please be patient (ready=0)
[144495.143619] ata1 (slot 3): softreset failed (device not ready)
[144495.150246] ata1 (slot 3): SRST fail, set srst fail flag
[144496.954714] ata1 (slot 3): SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[144496.962621] ata1 (slot 3): link reset sucessfully clear error flags
[144497.001336] ata1.00 (slot 3): disabling queued TRIM support
[144497.015502] ata1.00 (slot 3): disabling queued TRIM support
[144497.015525] ata1.00 (slot 3): configured for UDMA/133
[144497.021297] ata1 (slot 3): wake up successful, the reset fail can be ignored
[180937.211051]  Reinit 1 8001
[180937.214265]  Reinit 2 1
[180937.237173]  Reinit 1 8001
[180937.240397]  Reinit 2 1
[180937.260500] device ovs_bond0 left promiscuous mode
[180937.265994] audit: type=1700 audit(1636302894.330:26): dev=ovs_bond0 prom=0 old_prom=256 auid=4294967295 uid=0 gid=0 ses=4294967295
[180937.288676] device eth1 left promiscuous mode
[180937.293668] audit: type=1700 audit(1636302894.358:27): dev=eth1 prom=0 old_prom=256 auid=4294967295 uid=0 gid=0 ses=4294967295
[180937.306780] device eth0 left promiscuous mode
[180937.311766] audit: type=1700 audit(1636302894.376:28): dev=eth0 prom=0 old_prom=256 auid=4294967295 uid=0 gid=0 ses=4294967295
[180937.382367] iSCSI:iscsi_target.c:620:iscsit_del_np CORE[0] - Removed Network Portal: 10.8.32.9:3260 on iSCSI/TCP
[180937.394109] iSCSI:iscsi_target.c:620:iscsit_del_np CORE[0] - Removed Network Portal: [fe80::211:32ff:feca:fa1d]:3260 on iSCSI/TCP
[180940.677024] device ovs_eth0 entered promiscuous mode
[180940.682709] audit: type=1700 audit(1636302897.747:29): dev=ovs_eth0 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[180940.716240] eth0: 0xffffc9000041e000, 00:11:32:ca:fa:1d, IRQ 345
[180940.728800]  Reinit 1 8001
[180940.732023]  Reinit 2 1
[180940.744639]  Reinit 1 8001
[180940.747870]  Reinit 2 1
[180940.760343]  Reinit 1 8001
[180940.763570]  Reinit 2 1
[180940.793810] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[180940.806119] device eth0 entered promiscuous mode
[180940.811410] audit: type=1700 audit(1636302897.875:30): dev=eth0 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[180940.855797] IPv6: ADDRCONF(NETDEV_UP): ovs_eth0: link is not ready
[180940.966470] device ovs_eth1 entered promiscuous mode
[180940.972130] audit: type=1700 audit(1636302898.036:31): dev=ovs_eth1 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[180941.008495] eth1: 0xffffc9000011e000, 00:11:32:ca:fa:1e, IRQ 344
[180941.021075]  Reinit 1 8001
[180941.024299]  Reinit 2 1
[180941.036921]  Reinit 1 8001
[180941.040145]  Reinit 2 1
[180941.053616]  Reinit 1 8001
[180941.056842]  Reinit 2 1
[180941.087060] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[180941.100726] device eth1 entered promiscuous mode
[180941.106019] audit: type=1700 audit(1636302898.170:32): dev=eth1 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[180941.133197] IPv6: ADDRCONF(NETDEV_UP): ovs_eth1: link is not ready
[180941.405583] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: 10.8.32.9:3260 on iSCSI/TCP
[180944.099394]  Reinit 1 8001
[180944.102615]  Reinit 2 1
[180944.112810] r8168: eth1: link up 1 Gbps
[180944.117274] IPv6: ADDRCONF(NETDEV_CHANGE): ovs_eth1: link becomes ready
[180946.231702] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: 10.8.32.61:3260 on iSCSI/TCP
[180946.244388] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: [fe80::211:32ff:feca:fa1e]:3260 on iSCSI/TCP
[180951.842612]  Reinit 1 8001
[180951.845834]  Reinit 2 1
[180951.853663] eth1: 0xffffc9000011e000, 00:11:32:ca:fa:1e, IRQ 344
[180951.866228]  Reinit 1 8001
[180951.869449]  Reinit 2 1
[180951.882060]  Reinit 1 8001
[180951.885282]  Reinit 2 1
[180951.897847]  Reinit 1 8001
[180951.901068]  Reinit 2 1
[180952.061877] iSCSI:iscsi_target.c:620:iscsit_del_np CORE[0] - Removed Network Portal: 10.8.32.61:3260 on iSCSI/TCP
[180952.073978] iSCSI:iscsi_target.c:620:iscsit_del_np CORE[0] - Removed Network Portal: [fe80::211:32ff:feca:fa1e]:3260 on iSCSI/TCP
[180955.946070]  Reinit 1 8001
[180955.949295]  Reinit 2 1
[180955.959519] r8168: eth1: link up 1 Gbps
[180956.087470] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: 10.8.32.61:3260 on iSCSI/TCP
[180956.100124] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: [fe80::211:32ff:feca:fa1e]:3260 on iSCSI/TCP
[180992.659732] aqc111 2-1:1.0 eth2: Link Speed 1000, USB 3
[180992.794597] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: 169.254.101.61:3260 on iSCSI/TCP
[180992.807313] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: [fe80::265e:beff:fe65:8c3]:3260 on iSCSI/TCP
[181001.605101] audit: type=1325 audit(1636302958.665:33): table=filter family=2 entries=4
[181001.619738] audit: type=1325 audit(1636302958.679:34): table=filter family=2 entries=8
[181001.712897] audit: type=1325 audit(1636302958.772:35): table=filter family=2 entries=9
[181042.834573] audit: type=1325 audit(1636302999.893:36): table=filter family=2 entries=10
[181042.850032] audit: type=1325 audit(1636302999.908:37): table=filter family=2 entries=9
[181042.876658] Module [xt_recent] is removed.
[181042.899886] Module [xt_iprange] is removed.
[181042.915802] Module [xt_limit] is removed.
[181042.930788] Module [xt_state] is removed.
[181042.953827] Module [xt_multiport] is removed.
[181042.974049] Module [xt_LOG] is removed.
[181043.014800] audit: type=1325 audit(1636303000.073:38): table=filter family=2 entries=8
[181215.982394] iSCSI:iscsi_target.c:620:iscsit_del_np CORE[0] - Removed Network Portal: 169.254.101.61:3260 on iSCSI/TCP
[181215.995060] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: 192.168.100.11:3260 on iSCSI/TCP
[181224.783593] audit: type=1325 audit(1636303181.832:39): table=filter family=2 entries=4
[181224.798358] audit: type=1325 audit(1636303181.847:40): table=filter family=2 entries=8
[181224.891802] audit: type=1325 audit(1636303181.940:41): table=filter family=2 entries=9
[181261.861283] aqc111 2-1:1.0 eth2: Link Speed 1000, USB 3
[181265.007310] audit: type=1325 audit(1636303222.052:42): table=filter family=2 entries=10
[181265.022074] audit: type=1325 audit(1636303222.067:43): table=filter family=2 entries=9
[181265.047462] Module [xt_recent] is removed.
[181265.071327] Module [xt_iprange] is removed.
[181265.088135] Module [xt_limit] is removed.
[181265.106013] Module [xt_state] is removed.
[181265.127743] Module [xt_multiport] is removed.
[181265.149586] Module [xt_LOG] is removed.
[181265.190288] audit: type=1325 audit(1636303222.235:44): table=filter family=2 entries=8
[181291.524501]  Reinit 1 8001
[181291.527728]  Reinit 2 1
[181291.537957] r8168: eth0: link up 1 Gbps
[181291.542758] IPv6: ADDRCONF(NETDEV_CHANGE): ovs_eth0: link becomes ready
[181291.651477] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: [fe80::211:32ff:feca:fa1d]:3260 on iSCSI/TCP
[181300.431688] audit: type=1325 audit(1636303257.476:45): table=filter family=2 entries=4
[181300.446456] audit: type=1325 audit(1636303257.491:46): table=filter family=2 entries=8
[181300.540381] audit: type=1325 audit(1636303257.584:47): table=filter family=2 entries=9
[181341.654562] audit: type=1325 audit(1636303298.695:48): table=filter family=2 entries=10
[181341.669433] audit: type=1325 audit(1636303298.710:49): table=filter family=2 entries=9
[181341.695268] Module [xt_recent] is removed.
[181341.723539] Module [xt_iprange] is removed.
[181341.742282] Module [xt_limit] is removed.
[181341.758268] Module [xt_state] is removed.
[181341.778792] Module [xt_multiport] is removed.
[181341.800737] Module [xt_LOG] is removed.
[181341.843324] audit: type=1325 audit(1636303298.884:50): table=filter family=2 entries=8
[186008.153794] aqc111 2-1:1.0 eth2: Link Speed 1000, USB 3
[186013.246451] audit: type=1325 audit(1636307970.031:51): table=filter family=2 entries=4
[186013.261297] audit: type=1325 audit(1636307970.046:52): table=filter family=2 entries=8
[186013.354524] audit: type=1325 audit(1636307970.139:53): table=filter family=2 entries=9
[186053.471446] audit: type=1325 audit(1636308010.253:54): table=filter family=2 entries=10
[186053.486165] audit: type=1325 audit(1636308010.268:55): table=filter family=2 entries=9
[186053.511412] Module [xt_recent] is removed.
[186053.535458] Module [xt_iprange] is removed.
[186053.556359] Module [xt_limit] is removed.
[186053.572563] Module [xt_state] is removed.
[186053.595934] Module [xt_multiport] is removed.
[186053.617853] Module [xt_LOG] is removed.
[186053.658163] audit: type=1325 audit(1636308010.440:56): table=filter family=2 entries=8
[186356.549710] r8168: eth0: link down
[186356.558986]  Reinit 1 8001
[186356.562207]  Reinit 2 1
[186366.524408] audit: type=1325 audit(1636308323.289:57): table=filter family=2 entries=4
[186366.539410] audit: type=1325 audit(1636308323.304:58): table=filter family=2 entries=8
[186366.633227] audit: type=1325 audit(1636308323.398:59): table=filter family=2 entries=9
[186387.654782]  Reinit 1 8001
[186387.658005]  Reinit 2 1
[186387.668136] r8168: eth0: link up 1 Gbps
[186389.239503] r8168: eth1: link down
[186389.248772]  Reinit 1 8001
[186389.251991]  Reinit 2 1
[186390.403016] iSCSI:iscsi_target.c:620:iscsit_del_np CORE[0] - Removed Network Portal: 10.8.32.61:3260 on iSCSI/TCP
[186390.415015] iSCSI:iscsi_target.c:620:iscsit_del_np CORE[0] - Removed Network Portal: [fe80::211:32ff:feca:fa1e]:3260 on iSCSI/TCP
[186407.755479] audit: type=1325 audit(1636308364.519:60): table=filter family=2 entries=10
[186407.770199] audit: type=1325 audit(1636308364.533:61): table=filter family=2 entries=9
[186407.795597] Module [xt_recent] is removed.
[186407.822896] Module [xt_iprange] is removed.
[186407.838834] Module [xt_limit] is removed.
[186407.854863] Module [xt_state] is removed.
[186407.875451] Module [xt_multiport] is removed.
[186407.900306] Module [xt_LOG] is removed.
[186407.941206] audit: type=1325 audit(1636308364.704:62): table=filter family=2 entries=8
[186783.576922] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[186783.696700] iSCSI:iscsi_target.c:620:iscsit_del_np CORE[0] - Removed Network Portal: [fe80::265e:beff:fe65:8c3]:3260 on iSCSI/TCP
[186787.469042] aqc111 2-1:1.0 eth2: Link Speed 1000, USB 3
[186787.492298] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[186787.600354] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: [fe80::265e:beff:fe65:8c3]:3260 on iSCSI/TCP
[186792.501924] audit: type=1325 audit(1636308749.244:63): table=filter family=2 entries=4
[186792.516659] audit: type=1325 audit(1636308749.259:64): table=filter family=2 entries=8
[186792.610108] audit: type=1325 audit(1636308749.352:65): table=filter family=2 entries=9
[186833.729677] audit: type=1325 audit(1636308790.468:66): table=filter family=2 entries=10
[186833.744438] audit: type=1325 audit(1636308790.483:67): table=filter family=2 entries=9
[186833.769883] Module [xt_recent] is removed.
[186833.792486] Module [xt_iprange] is removed.
[186833.806977] Module [xt_limit] is removed.
[186833.823325] Module [xt_state] is removed.
[186833.844040] Module [xt_multiport] is removed.
[186833.866021] Module [xt_LOG] is removed.
[186833.908448] audit: type=1325 audit(1636308790.647:68): table=filter family=2 entries=8
[186853.393389] aqc111 2-1:1.0 eth2: Link Speed 1000, USB 3
[186857.761209] audit: type=1325 audit(1636308814.500:69): table=filter family=2 entries=4
[186857.775951] audit: type=1325 audit(1636308814.514:70): table=filter family=2 entries=8
[186857.870130] audit: type=1325 audit(1636308814.609:71): table=filter family=2 entries=9
[186898.993256] audit: type=1325 audit(1636308855.728:72): table=filter family=2 entries=10
[186899.007998] audit: type=1325 audit(1636308855.743:73): table=filter family=2 entries=9
[186899.033316] Module [xt_recent] is removed.
[186899.055891] Module [xt_iprange] is removed.
[186899.071918] Module [xt_limit] is removed.
[186899.087919] Module [xt_state] is removed.
[186899.111676] Module [xt_multiport] is removed.
[186899.132582] Module [xt_LOG] is removed.
[186899.173076] audit: type=1325 audit(1636308855.908:74): table=filter family=2 entries=8
[187013.276021] aqc111 2-1:1.0 eth2: Link Speed 1000, USB 3
[187014.363281] audit: type=1325 audit(1636308971.092:75): table=filter family=2 entries=4
[187014.377976] audit: type=1325 audit(1636308971.107:76): table=filter family=2 entries=8
[187014.471273] audit: type=1325 audit(1636308971.200:77): table=filter family=2 entries=9
[187054.599824] audit: type=1325 audit(1636309011.327:78): table=filter family=2 entries=10
[187054.614648] audit: type=1325 audit(1636309011.342:79): table=filter family=2 entries=9
[187054.639955] Module [xt_recent] is removed.
[187054.670635] Module [xt_iprange] is removed.
[187054.692527] Module [xt_limit] is removed.
[187054.708545] Module [xt_state] is removed.
[187054.732984] Module [xt_multiport] is removed.
[187054.754870] Module [xt_LOG] is removed.
[187054.797596] audit: type=1325 audit(1636309011.525:80): table=filter family=2 entries=8
[187222.930579] iSCSI_F:iscsi_target_login.c:800:iscsi_post_login_handler Discovery session from I[iqn.2000-01.com.synology:tun-mps-nas.default-target.ed989daea96][192.168.100.12:49550]
[187222.950203] iSCSI:iscsi_target.c:2774:iscsit_handle_logout_cmd Logout - I[iqn.2000-01.com.synology:tun-mps-nas.default-target.ed989daea96][192.168.100.12:49550], T[(null)]
[187222.967733] iSCSI_F:iscsi_target.c:4723:iscsit_close_connection Close - I[iqn.2000-01.com.synology:tun-mps-nas.default-target.ed989daea96][192.168.100.12:49550], T[(null)]
[187243.468717] iSCSI_F:iscsi_target_login.c:800:iscsi_post_login_handler Discovery session from I[iqn.2000-01.com.synology:tun-mps-nas.default-target.ed989daea96][192.168.100.12:49553]
[187243.487705] iSCSI:iscsi_target.c:2774:iscsit_handle_logout_cmd Logout - I[iqn.2000-01.com.synology:tun-mps-nas.default-target.ed989daea96][192.168.100.12:49553], T[(null)]
[187243.505050] iSCSI_F:iscsi_target.c:4723:iscsit_close_connection Close - I[iqn.2000-01.com.synology:tun-mps-nas.default-target.ed989daea96][192.168.100.12:49553], T[(null)]
[187243.526405] iSCSI_F:iscsi_target_login.c:800:iscsi_post_login_handler Discovery session from I[iqn.2000-01.com.synology:tun-mps-nas.default-target.ed989daea96][192.168.100.12:49554]
[187243.546741] iSCSI:iscsi_target.c:2774:iscsit_handle_logout_cmd Logout - I[iqn.2000-01.com.synology:tun-mps-nas.default-target.ed989daea96][192.168.100.12:49554], T[(null)]
[187243.564086] iSCSI_F:iscsi_target.c:4723:iscsit_close_connection Close - I[iqn.2000-01.com.synology:tun-mps-nas.default-target.ed989daea96][192.168.100.12:49554], T[(null)]
[188831.930952] Module [aqc111] is removed.
[188831.935448] usbcore: deregistering interface driver aqc111
[188831.941771] aqc111 2-1:1.0 eth2: unregister 'aqc111' usb-0000:00:15.0-1, QNAP QNA-UC5G1T USB to 5GbE Adapter
[188831.968509] Module [usbnet] is removed.
[188831.977533] Module [mii] is removed.
[188832.061086] iSCSI:iscsi_target.c:620:iscsit_del_np CORE[0] - Removed Network Portal: 192.168.100.11:3260 on iSCSI/TCP
[188832.073219] iSCSI:iscsi_target.c:620:iscsit_del_np CORE[0] - Removed Network Portal: [fe80::265e:beff:fe65:8c3]:3260 on iSCSI/TCP
[188837.955228] iSCSI:target_core_configfs.c:4868:target_core_drop_subdev process [15451] '/var/packages/ScsiTarget/target/bin/synoiscsihook --volume_umount_pre /volume1' unload LUN(fileio_0/LUN_5aa0ca09-4184-49f8-aa09-94f8f42a3a8c), uuid(5aa0ca09-4184-49f8-aa09-94f8f42a3a8c)
[188837.982264] iSCSI:target_core_rodsp_server.c:172:rodsp_server_sink_unregister SINK-UNREG(5aa0ca09-4184-49f8-aa09-94f8f42a3a8c)
[188837.995310] iSCSI:target_core_configfs.c:5410:volume_drop_item unload volume(volume1)
[188840.045977] BTRFS info (device dm-2): using free space tree
[188840.052329] BTRFS info (device dm-2): using free block group cache tree
[188840.832190] audit: type=1325 audit(1636310797.462:81): table=filter family=2 entries=4
[188840.847229] audit: type=1325 audit(1636310797.477:82): table=filter family=2 entries=8
[188840.947112] audit: type=1325 audit(1636310797.576:83): table=filter family=2 entries=9
[188882.058402] audit: type=1325 audit(1636310838.684:84): table=filter family=2 entries=10
[188882.073146] audit: type=1325 audit(1636310838.699:85): table=filter family=2 entries=9
[188882.098279] Module [xt_recent] is removed.
[188882.121899] Module [xt_iprange] is removed.
[188882.137997] Module [xt_limit] is removed.
[188882.153872] Module [xt_state] is removed.
[188882.177345] Module [xt_multiport] is removed.
[188882.200194] Module [xt_LOG] is removed.
[188882.242719] audit: type=1325 audit(1636310838.869:86): table=filter family=2 entries=8
[189227.118942]  Reinit 1 8001
[189227.122167]  Reinit 2 1
[189227.132301] r8168: eth1: link up 1 Gbps
[189227.234712] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: 169.254.67.233:3260 on iSCSI/TCP
[189227.247314] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: [fe80::211:32ff:feca:fa1e]:3260 on iSCSI/TCP
[189228.851090] iSCSI:iscsi_target.c:620:iscsit_del_np CORE[0] - Removed Network Portal: 169.254.67.233:3260 on iSCSI/TCP
[189228.863272] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: 10.8.32.61:3260 on iSCSI/TCP
[189236.105618] audit: type=1325 audit(1636311192.713:87): table=filter family=2 entries=4
[189236.120259] audit: type=1325 audit(1636311192.728:88): table=filter family=2 entries=8
[189236.214678] audit: type=1325 audit(1636311192.822:89): table=filter family=2 entries=9
[189277.338829] audit: type=1325 audit(1636311233.943:90): table=filter family=2 entries=10
[189277.353451] audit: type=1325 audit(1636311233.958:91): table=filter family=2 entries=9
[189277.378483] Module [xt_recent] is removed.
[189277.402639] Module [xt_iprange] is removed.
[189277.418716] Module [xt_limit] is removed.
[189277.436623] Module [xt_state] is removed.
[189277.458907] Module [xt_multiport] is removed.
[189277.480885] Module [xt_LOG] is removed.
[189277.524164] audit: type=1325 audit(1636311234.129:92): table=filter family=2 entries=8
[190655.245270] md2: detected capacity change from 7991698522112 to 0
[190655.252211] md: md2: set sata3p3 to auto_remap [0]
[190655.257662] md: md2: set sata2p3 to auto_remap [0]
[190655.263109] md: md2: set sata1p3 to auto_remap [0]
[190655.268563] md: md2: set sata4p3 to auto_remap [0]
[190655.274010] md: md2 stopped.
[190655.277327] md: unbind<sata3p3>
[190655.285746] md: export_rdev(sata3p3)
[190655.289861] md: unbind<sata2p3>
[190655.299956] md: export_rdev(sata2p3)
[190655.304078] md: unbind<sata1p3>
[190655.312955] md: export_rdev(sata1p3)
[190655.317071] md: unbind<sata4p3>
[190655.324958] md: export_rdev(sata4p3)
[191326.909181] md: bind<sata3p3>
[191326.912949] md: bind<sata4p3>
[191326.916649] md: bind<sata1p3>
[191326.920343] md: bind<sata2p3>
[191326.924909] md/raid10:md2: active with 4 out of 4 devices
[191326.939097] md2: detected capacity change from 0 to 7991698522112
[191328.779564] flashcache_syno: /dev/vg1/volume_1 exclude check success
[191329.217507] BTRFS: device label 2021.11.07-19:28:05 v42218 devid 1 transid 3 /dev/mapper/cachedev_0
[191329.303697] BTRFS info (device dm-2): using free space tree
[191329.310053] BTRFS info (device dm-2): using free block group cache tree
[191329.317540] BTRFS info (device dm-2): has skinny extents
[191329.323569] BTRFS info (device dm-2): flagging fs with big metadata feature
[191329.333491] BTRFS info (device dm-2): setting 4611686018427387904 campat feature flag
[191329.378572] BTRFS: creating free space tree
[191329.383417] BTRFS info (device dm-2): setting 1 ro feature flag
[191329.425663] BTRFS info (device dm-2): creating UUID tree
[191329.499080] BTRFS info (device dm-2): setting 2 feature flag
[191329.656037] SYNO.Storage.CG (23708): drop_caches: 3
[191329.980614] BTRFS info (device dm-2): enabling auto syno reclaim space
[191329.988015] BTRFS info (device dm-2): use ssd allocation scheme
[191329.994730] BTRFS info (device dm-2): using free space tree
[191330.001050] BTRFS info (device dm-2): using free block group cache tree
[191330.008535] BTRFS info (device dm-2): has skinny extents
[191330.195035] BTRFS info (device dm-2): qgroup scan completed (inconsistency flag cleared)
[191331.603434] Synotify use 16384 event queue size
[191331.608633] Synotify use 16384 event queue size
[191333.049727] BTRFS info (device dm-2): using free space tree
[191333.056066] BTRFS info (device dm-2): using free block group cache tree
[191335.140334] md: md2: current auto_remap = 0
[191335.145133] md: requested-resync of RAID array md2
[191335.150599] md: minimum _guaranteed_  speed: 10000 KB/sec/disk.
[191335.157314] md: using maximum available idle IO bandwidth (but not more than 600000 KB/sec) for requested-resync.
[191335.168886] md: using 128k window, over a total of 7804393088k.
[192268.630655] aqc111 2-1:1.0 eth2: register 'aqc111' at usb-0000:00:15.0-1, QNAP QNA-UC5G1T USB to 5GbE Adapter, 24:5e:be:65:08:c3
[192268.643714] usbcore: registered new interface driver aqc111
[192268.885847] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[192275.185574] aqc111 2-1:1.0 eth2: Link Speed 1000, USB 3
[192275.208789] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[192278.077319] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: 192.168.100.11:3260 on iSCSI/TCP
[192278.089880] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: [fe80::265e:beff:fe65:8c3]:3260 on iSCSI/TCP
[192287.643770] audit: type=1325 audit(1636314244.084:93): table=filter family=2 entries=4
[192287.658701] audit: type=1325 audit(1636314244.099:94): table=filter family=2 entries=8
[192287.753554] audit: type=1325 audit(1636314244.194:95): table=filter family=2 entries=9
[192327.918912] audit: type=1325 audit(1636314284.356:96): table=filter family=2 entries=10
[192327.934194] audit: type=1325 audit(1636314284.371:97): table=filter family=2 entries=9
[192327.959785] Module [xt_recent] is removed.
[192327.988330] Module [xt_iprange] is removed.
[192328.004186] Module [xt_limit] is removed.
[192328.019185] Module [xt_state] is removed.
[192328.043914] Module [xt_multiport] is removed.
[192328.066531] Module [xt_LOG] is removed.
[192328.109654] audit: type=1325 audit(1636314284.547:98): table=filter family=2 entries=8
[192431.612210] aqc111 2-1:1.0 eth2: Link Speed 1000, USB 3
[192437.518958] audit: type=1325 audit(1636314393.950:99): table=filter family=2 entries=4
[192437.534618] audit: type=1325 audit(1636314393.966:100): table=filter family=2 entries=8
[192437.644998] audit: type=1325 audit(1636314394.076:101): table=filter family=2 entries=9
[192478.168981] audit: type=1325 audit(1636314434.599:102): table=filter family=2 entries=10
[192478.183999] audit: type=1325 audit(1636314434.614:103): table=filter family=2 entries=9
[192478.209623] Module [xt_recent] is removed.
[192478.234555] Module [xt_iprange] is removed.
[192478.268492] Module [xt_limit] is removed.
[192478.312757] Module [xt_state] is removed.
[192478.337249] Module [xt_multiport] is removed.
[192478.359118] Module [xt_LOG] is removed.
[192478.399623] audit: type=1325 audit(1636314434.829:104): table=filter family=2 entries=8
[192535.740200] Module [aqc111] is removed.
[192535.744700] usbcore: deregistering interface driver aqc111
[192535.751116] aqc111 2-1:1.0 eth2: unregister 'aqc111' usb-0000:00:15.0-1, QNAP QNA-UC5G1T USB to 5GbE Adapter
[192535.778077] Module [usbnet] is removed.
[192535.792585] Module [mii] is removed.
[192535.864309] iSCSI:iscsi_target.c:620:iscsit_del_np CORE[0] - Removed Network Portal: 192.168.100.11:3260 on iSCSI/TCP
[192535.876640] iSCSI:iscsi_target.c:620:iscsit_del_np CORE[0] - Removed Network Portal: [fe80::265e:beff:fe65:8c3]:3260 on iSCSI/TCP
[192538.964784] aqc111 2-1:1.0 eth2: register 'aqc111' at usb-0000:00:15.0-1, QNAP QNA-UC5G1T USB to 5GbE Adapter, 24:5e:be:65:08:c3
[192538.977859] usbcore: registered new interface driver aqc111
[192539.219447] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[192544.801861] audit: type=1325 audit(1636314501.227:105): table=filter family=2 entries=4
[192544.817571] audit: type=1325 audit(1636314501.243:106): table=filter family=2 entries=8
[192544.926697] audit: type=1325 audit(1636314501.352:107): table=filter family=2 entries=9
[192545.667196] aqc111 2-1:1.0 eth2: Link Speed 1000, USB 3
[192545.690458] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[192546.837274] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: 192.168.100.11:3260 on iSCSI/TCP
[192546.849737] iSCSI:iscsi_target.c:528:iscsit_add_np CORE[0] - Added Network Portal: [fe80::265e:beff:fe65:8c3]:3260 on iSCSI/TCP
[192586.327187] audit: type=1325 audit(1636314542.751:108): table=filter family=2 entries=10
[192586.343458] audit: type=1325 audit(1636314542.767:109): table=filter family=2 entries=9
[192586.371835] Module [xt_recent] is removed.
[192586.426601] Module [xt_iprange] is removed.
[192586.445274] Module [xt_limit] is removed.
[192586.460366] Module [xt_state] is removed.
[192586.481447] Module [xt_multiport] is removed.
[192586.503507] Module [xt_LOG] is removed.
[192586.570813] audit: type=1325 audit(1636314542.995:110): table=filter family=2 entries=8

Output of lsusb command

|__usb1          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller 0000:00:15.0) hub
  |__1-4         f400:f400:0100 00  2.00  480MBit/s 200mA 1IF  (Synology DiskStation 7F000410D9EFD624)
|__usb2          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller 0000:00:15.0) hub
  |__2-1         1c04:0015:0101 00  3.20 5000MBit/s 896mA 1IF  (QNAP QNAP QNA-UC5G1T USB to 5GbE Adapter 15I19255)

Output of ifconfig -a command

eth0      Link encap:Ethernet  HWaddr 00:11:32:CA:FA:1D
          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:9000  Metric:1
          RX packets:300320 errors:0 dropped:0 overruns:0 frame:0
          TX packets:131425 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:112655510 (107.4 MiB)  TX bytes:74690380 (71.2 MiB)
          Interrupt:89 base 0xe000

eth1      Link encap:Ethernet  HWaddr 00:11:32:CA:FA:1E
          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:9000  Metric:1
          RX packets:1048650 errors:0 dropped:0 overruns:0 frame:0
          TX packets:53151 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:419219705 (399.7 MiB)  TX bytes:25602411 (24.4 MiB)
          Interrupt:88 base 0xe000

eth2      Link encap:Ethernet  HWaddr 24:5E:BE:65:08:C3
          inet addr:192.168.100.11  Bcast:192.168.101.255  Mask:255.255.254.0
          inet6 addr: fe80::265e:beff:fe65:8c3/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:48 errors:1 dropped:0 overruns:0 frame:0
          TX packets:123 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:8428 (8.2 KiB)  TX bytes:32864 (32.0 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:560 errors:0 dropped:0 overruns:0 frame:0
          TX packets:560 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:69366 (67.7 KiB)  TX bytes:69366 (67.7 KiB)

ovs-syste Link encap:Ethernet  HWaddr 66:49:B4:FE:D2:DD
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ovs_eth0  Link encap:Ethernet  HWaddr 00:11:32:CA:FA:1D
          inet addr:10.8.32.9  Bcast:10.8.33.255  Mask:255.255.254.0
          inet6 addr: fe80::211:32ff:feca:fa1d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:9000  Metric:1
          RX packets:104530 errors:0 dropped:0 overruns:0 frame:0
          TX packets:44289 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:37637479 (35.8 MiB)  TX bytes:43931774 (41.8 MiB)

ovs_eth1  Link encap:Ethernet  HWaddr 00:11:32:CA:FA:1E
          inet addr:10.8.32.61  Bcast:10.8.33.255  Mask:255.255.254.0
          inet6 addr: fe80::211:32ff:feca:fa1e/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:9000  Metric:1
          RX packets:57294 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5468 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:25428462 (24.2 MiB)  TX bytes:4227709 (4.0 MiB)

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[bb-qq]

When QNA-UC5G1T is connected to a PC and communicates in the same environment, is the performance OK?
I would like to confirm just in case because QNA-UC5G1T is a very sensitive device. (thermal throttling, auto-negotiation, etc.)

[BodhiSmoketiffa]

Yes the preformance was as expected. I did some minor changes. I'm using a LUN that only connects via LAN 3(QNAP) and I was able to get the transfer speeds up too 400/mbs but that only lasts for 10 percent of the transfer. After that it goes back down to 100ish/mbs. I imagine this is due to thermal throttling?

[bb-qq]

Yes, you are most likely experiencing thermal throttling. Disabling thermal throttling or enabling Low Power mode using ethtool may improve the symptoms. Please see the README for instructions.

[BodhiSmoketiffa]

I input both the cmds from the readme using putty and it'll trasnfer at 1.5gbe to start, then go down to 300/mbs then back down to 100/mbs. How can you check to see if they were input correctly?

[bb-qq]

If you didn't see any errors, the settings would have been reflected correctly.

I would like to ask aditional:

• Are you using a front USB port?
• Did you measure throughput using iperf?

[bb-qq]

Since there has been no response for a long time, this issue is closed. Please feel free to re-open it if you have any questions.

What I wanted to confirm is now summarized on this page and I leave the link as a note.
https://github.com/bb-qq/r8152/wiki/Troubleshooting