Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Not working on rtd1296-based DS220j #122

Closed
marcosscriven opened this issue May 18, 2021 · 7 comments
Closed

Not working on rtd1296-based DS220j #122

marcosscriven opened this issue May 18, 2021 · 7 comments

Comments

@marcosscriven
Copy link

Description of the problem

Installed package for rtd1296 on my DS220j. Upon inserting device, I see several processes die.

Description of your products

DS220j
rtd1296
DSM 6.2.4-25556
Sabrent NT-S25G

Description of your environment

Direct to PC
Another NT-S25G
Short cat6 cable

Output of dmesg command

[  190.151887] usb 5-1: new SuperSpeed USB device number 2 using xhci-hcd
[  190.387630] usb 5-1: reset SuperSpeed USB device number 2 using xhci-hcd
[  190.502040] netif_napi_add() called with weight 256 on device eth%d
[  190.541820] r8152 5-1:1.0 eth1: v2.14.0 (2020/09/24)
[  190.546913] r8152 5-1:1.0 eth1: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[  193.554448] Bluetooth: Core ver 2.21
[  193.558197] NET: Registered protocol family 31
[  193.562810] Bluetooth: HCI device and connection manager initialized
[  193.569500] Bluetooth: HCI socket layer initialized
[  193.574590] Bluetooth: L2CAP socket layer initialized
[  193.579817] Bluetooth: SCO socket layer initialized
[  193.596915] Bluetooth: RFCOMM TTY layer initialized
[  193.602072] Bluetooth: RFCOMM socket layer initialized
[  193.607417] Bluetooth: RFCOMM ver 1.11
[  193.641079] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[  193.647272] Bluetooth: HIDP socket layer initialized
[  193.838857] usbcore: registered new interface driver btusb
[  195.501889] init: btacd main process (9978) killed by TERM signal
[  197.065687] init: nmbd main process (10288) killed by TERM signal
[  201.662438] init: bluetoothd main process (9939) killed by KILL signal

Output of lsusb command

|__usb2          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.59+ xhci-hcd xHCI Host Controller xhci-hcd.2.auto) hub
|__usb3          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.59+ xhci-hcd xHCI Host Controller xhci-hcd.2.auto) hub
|__usb4          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.59+ xhci-hcd xHCI Host Controller xhci-hcd.5.auto) hub
|__usb5          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.59+ xhci-hcd xHCI Host Controller xhci-hcd.5.auto) hub
  |__5-1         0bda:8156:3000 00  3.20 5000MBit/s 512mA 1IF  (Realtek USB 10/100/1G/2.5G LAN 000000001)

Output of ifconfig -a command

eth0      Link encap:Ethernet  HWaddr 00:11:32:E4:92:A9                       
          inet addr:192.168.1.204  Bcast:192.168.1.255  Mask:255.255.255.0    
          inet6 addr: fe80::211:32ff:fee4:92a9/64 Scope:Link                  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1                  
          RX packets:11925 errors:0 dropped:0 overruns:0 frame:0              
          TX packets:9230 errors:0 dropped:0 overruns:0 carrier:0             
          collisions:0 txqueuelen:1000                                        
          RX bytes:2880220 (2.7 MiB)  TX bytes:6164369 (5.8 MiB)              
          Interrupt:11                                                        
                                                                              
eth1      Link encap:Ethernet  HWaddr 00:24:27:88:0A:B0                       
          BROADCAST MULTICAST  MTU:1500  Metric:1                             
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0                  
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0                
          collisions:0 txqueuelen:1000                                        
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)                              
                                                                              
lo        Link encap:Local Loopback                                           
          inet addr:127.0.0.1  Mask:255.0.0.0                                 
          inet6 addr: ::1/128 Scope:Host                                      
          UP LOOPBACK RUNNING  MTU:65536  Metric:1                            
          RX packets:28 errors:0 dropped:0 overruns:0 frame:0                 
          TX packets:28 errors:0 dropped:0 overruns:0 carrier:0               
          collisions:0 txqueuelen:1                                           
          RX bytes:3363 (3.2 KiB)  TX bytes:3363 (3.2 KiB)                    
                                                                              
sit0      Link encap:IPv6-in-IPv4                                             
          NOARP  MTU:1480  Metric:1                                           
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0                  
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0                
          collisions:0 txqueuelen:1                                           
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
@marcosscriven
Copy link
Author

Hmm - scratch that, after trying to unplug/plug a few times, I do manage to get a connection.

Not sure why, but sometimes I have to run ifconfig eth1 up, and sometimes not.

iperf3 result:

-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.2.1, port 51497
[  5] local 192.168.2.2 port 5201 connected to 192.168.2.1 port 51498
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec   255 MBytes  2.14 Gbits/sec
[  5]   1.00-2.00   sec   272 MBytes  2.28 Gbits/sec
[  5]   2.00-3.00   sec   269 MBytes  2.25 Gbits/sec
[  5]   3.00-4.00   sec   273 MBytes  2.29 Gbits/sec
[  5]   4.00-5.00   sec   270 MBytes  2.26 Gbits/sec
[  5]   5.00-6.00   sec   272 MBytes  2.28 Gbits/sec
[  5]   6.00-7.00   sec   271 MBytes  2.28 Gbits/sec
[  5]   7.00-8.00   sec   269 MBytes  2.26 Gbits/sec
[  5]   8.00-9.00   sec   274 MBytes  2.30 Gbits/sec
[  5]   9.00-10.00  sec   271 MBytes  2.27 Gbits/sec
[  5]  10.00-10.04  sec  10.8 MBytes  2.25 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.04  sec  2.64 GBytes  2.26 Gbits/sec                  receiver
-----------------------------------------------------------

@marcosscriven
Copy link
Author

Arghh... it's unstable. After working a few minutes, iperf3 stops and I see:

[ 1608.463064] xhci-hcd xhci-hcd.5.auto: WARN Event TRB for slot 1 ep 3 with no TDs queued?
[ 1608.471358] xhci-hcd xhci-hcd.5.auto: WARN Event TRB for slot 1 ep 3 with no TDs queued?
[ 1608.479642] xhci-hcd xhci-hcd.5.auto: WARN Event TRB for slot 1 ep 3 with no TDs queued?
[ 1608.487926] xhci-hcd xhci-hcd.5.auto: WARN Event TRB for slot 1 ep 3 with no TDs queued?
[ 1608.496210] xhci-hcd xhci-hcd.5.auto: WARN Event TRB for slot 1 ep 3 with no TDs queued?
[ 1608.504494] xhci-hcd xhci-hcd.5.auto: WARN Event TRB for slot 1 ep 3 with no TDs queued?
[ 1608.512777] xhci-hcd xhci-hcd.5.auto: WARN Event TRB for slot 1 ep 3 with no TDs queued?
[ 1608.521061] xhci-hcd xhci-hcd.5.auto: WARN Event TRB for slot 1 ep 3 with no TDs queued?
[ 1608.529344] xhci-hcd xhci-hcd.5.auto: WARN Event TRB for slot 1 ep 3 with no TDs queued?
[ 1608.537651] xhci-hcd xhci-hcd.5.auto: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1
[ 1608.548426] xhci-hcd xhci-hcd.5.auto: Looking for event-dma 000000001e165130 trb-start 000000001e165040 trb-end 000000001e165040 seg-start 000000001e165000 seg-end 000000001e165ff0
[ 1608.564889] xhci-hcd xhci-hcd.5.auto: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1
[ 1608.575662] xhci-hcd xhci-hcd.5.auto: Looking for event-dma 000000001e165140 trb-start 000000001e165040 trb-end 000000001e165040 seg-start 000000001e165000 seg-end 000000001e165ff0
[ 1634.009627] NETDEV WATCHDOG: eth1 (r8152): transmit queue 0 timed out
[ 1634.016264] ------------[ cut here ]------------
[ 1634.020990] WARNING: at net/sched/sch_generic.c:306
[ 1634.025983] Modules linked in: btusb btrtl btintel btbcm hidp rfcomm bluetooth r8152(OE) cifs udf isofs loop tcm_loop(O) iscsi_target_mod(O) target_core_ep(O) target_core_multi_file(O) target_core_file(O) target_core_iblock(O) target_core_mod(O) syno_extent_pool(PO) rodsp_ep(O) nfsd exportfs rpcsec_gss_krb5 syno_hddmon(P) hid_generic usbhid hid usblp usb_storage uhci_hcd ds220j_synobios(PO) exfat(O) btrfs synoacl_vfs(PO) zlib_deflate hfsplus md4 hmac r8168(O) i2c_algo_bit vxlan ip6_udp_tunnel udp_tunnel fuse vfat fat aes_neon_blk aes_ce_blk gf128mul ablk_helper arc4 cryptd ecryptfs sha256_generic ecb authenc des_generic ansi_cprng cts md5 cbc dm_snapshot dm_bufio crc_itu_t crc_ccitt quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 sg dwc3_rtk xhci_pci xhci_plat_hcd xhci_hcd ehci_pci
[ 1634.098998]  ehci_hcd dwc3 usbcore usb_common phy_rtk_usb3 phy_rtk_usb2 phy_rtk_rle0599 [last unloaded: ds220j_synobios]

[ 1634.110415] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P           OE   4.4.59+ #25556
[ 1634.118163] Hardware name: Realtek_RTD1296 (DT)
[ 1634.122800] task: ffffffc000a4b2c0 ti: ffffffc000a40000 task.ti: ffffffc000a40000
[ 1634.130468] PC is at dev_watchdog+0x24c/0x25c
[ 1634.134929] LR is at dev_watchdog+0x24c/0x25c
[ 1634.139388] pc : [<ffffffc0007315ec>] lr : [<ffffffc0007315ec>] pstate: 60000145
[ 1634.146958] sp : ffffffc000a43c00
[ 1634.150350] x29: ffffffc000a43c00 x28: 00000000000000a0
[ 1634.155810] x27: 0000000000000008 x26: dead000000000200
[ 1634.161269] x25: ffffffc01df829b8 x24: ffffffc01df827b8
[ 1634.166729] x23: 00000000ffffffff x22: ffffffc000a91000
[ 1634.172189] x21: ffffffc000a46000 x20: ffffffc00675c000
[ 1634.177650] x19: 0000000000000000 x18: fffffffffffffffb
[ 1634.183110] x17: 0000007fa69bfe48 x16: ffffffc0002eb658
[ 1634.188571] x15: 003b9aca00000000 x14: 0fffffffffffffff
[ 1634.194031] x13: 0000000000000028 x12: 0101010101010101
[ 1634.199491] x11: ffffffc000a55000 x10: 00000000000002b3
[ 1634.204952] x9 : ffffffc000a43960 x8 : 756575712074696d
[ 1634.210412] x7 : 00000000000002b4 x6 : 0000000000000049
[ 1634.215872] x5 : 0000000000000000 x4 : 0000000000000000
[ 1634.221332] x3 : 0000000000000000 x2 : ffffffc01df83228
[ 1634.226790] x1 : ffffffc01df81ae0 x0 : 0000000000000039

[ 1634.233775] Call trace:
[ 1634.236282] [<ffffffc0007315ec>] dev_watchdog+0x24c/0x25c
[ 1634.241812] [<ffffffc0002ea310>] call_timer_fn.isra.29+0x28/0x88
[ 1634.247962] [<ffffffc0002ea4f0>] run_timer_softirq+0x180/0x1f0
[ 1634.253936] [<ffffffc00029c8d0>] __do_softirq+0xf8/0x218
[ 1634.259375] [<ffffffc00029cc0c>] irq_exit+0x64/0x90
[ 1634.264371] [<ffffffc0002db424>] __handle_domain_irq+0x60/0xb0
[ 1634.270343] [<ffffffc000280cf8>] gic_handle_irq+0x60/0xb8
[ 1634.275869] Exception stack(0xffffffc000a43db0 to 0xffffffc000a43ee0)
[ 1634.282463] 3da0:                                   ffffffc000a46000 0000008000000000
[ 1634.290480] 3dc0: ffffffc000a43f10 ffffffc000284e70 0000000060000145 ffffffc0007ea000
[ 1634.298496] 3de0: 0000000000000000 0000000000000000 0000000000000001 ffffffc000a47000
[ 1634.306512] 3e00: 0000000000000001 0000000000000000 0000000000048540 000000010002091c
[ 1634.314529] 3e20: ffffffc000a4bb30 ffffffc000a43e80 0000000000000810 0000000000000030
[ 1634.322545] 3e40: 0000000000000000 ffff000000000000 282039302f32302f 003b9aca00000000
[ 1634.330561] 3e60: ffffffc0002eb658 0000007fa69bfe48 fffffffffffffffb ffffffc000a46000
[ 1634.338577] 3e80: ffffffc000a46a48 ffffffc000a2bac0 ffffffc000a2f048 ffffffc000a43f30
[ 1634.346594] 3ea0: ffffffc0007ea000 ffffffc000a46000 ffffffc000a40000 0000000000000000
[ 1634.354610] 3ec0: 0000000000000000 ffffffc000a43f10 ffffffc000284e6c ffffffc000a43f10
[ 1634.362626] [<ffffffc000283f00>] el1_irq+0x80/0x100
[ 1634.367620] [<ffffffc0002ced60>] default_idle_call+0x1c/0x30
[ 1634.373413] [<ffffffc0002cef58>] cpu_startup_entry+0x194/0x1e4
[ 1634.379387] [<ffffffc0007d9998>] rest_init+0x74/0x7c
[ 1634.384473] [<ffffffc0009ef92c>] start_kernel+0x380/0x394
[ 1634.389999] [<00000000007df000>] 0x7df000
[ 1634.394101] ---[ end trace ac76aaefb646a260 ]---
[ 1634.398863] r8152 5-1:1.0 eth1: Tx timeout
[ 1634.405411] r8152 5-1:1.0 eth1: Tx status -2
[ 1634.409814] r8152 5-1:1.0 eth1: Tx status -2
[ 1634.414208] r8152 5-1:1.0 eth1: Tx status -2
[ 1634.418601] r8152 5-1:1.0 eth1: Tx status -2
[ 1636.424898] r8152 5-1:1.0 eth1: get_registers -108
[ 1636.429882] r8152 5-1:1.0 eth1: get_registers -71
<--- repeats dozens of times --->
[ 1636.572539] r8152 5-1:1.0 eth1: get_registers -71
[ 1636.601036] xhci-hcd xhci-hcd.5.auto: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[ 1636.610735] r8152 5-1:1.0 eth1: get_registers -108
[ 1636.610791] usb 5-1: reset SuperSpeed USB device number 2 using xhci-hcd

@marcosscriven
Copy link
Author

Hmm - I see @Raychan87 used the older driver #114 (comment)

Should we be using that one?

@marcosscriven
Copy link
Author

marcosscriven commented May 18, 2021 •
edited
Loading

@bb-qq - is there any way to get an rtd2196 build of 2.12.0-3.spk please (or let me know how to build for it).

Per prior comment, someone has found that worked for their 8156-based adapter, and it looks like there's a huge number of changes in the Realtek driver since.

While Googling around on this - found some potentially good news, with official Linux support coming in 5.13 https://www.phoronix.com/scan.php?page=news_item&px=Realtek-RTL8153-RTL8156-Linux

Perhaps that can (or will) be backported

@bb-qq
Copy link
Owner

bb-qq commented May 29, 2021

I created r8152-rtd1296-2.12.0-3.spk. If you wish to create it by yourself, please see this page.

@bb-qq
Copy link
Owner

bb-qq commented May 29, 2021

FYI: Today I released the new release 2.15.0-1 that includes many changes from Realtek. You might find worth in this release...

@bb-qq
Copy link
Owner

bb-qq commented Jul 11, 2021

It's been a while since my last post, so I'm closing this issue for now. If you still have any problems, please feel free to reopen this issue.

@bb-qq bb-qq closed this as completed Jul 11, 2021
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@marcosscriven @bb-qq