living_room_light_switch.yaml

substitutions:
  devicename: living_room_light_switch

esphome:
  name: ${devicename}
  platform: ESP8266
  board: esp01_1m

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  manual_ip:
    static_ip: !secret living_room_light_switch_ip
    gateway: !secret gateway
    subnet: !secret subnet

# Enable logging
logger:

# Enable Home Assistant API
api:

ota:

i2c:
  sda: GPIO12
  scl: GPIO14

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO13
    name: "Wall Switch"
    on_state:
      then:
        - switch.toggle: relay
  - platform: gpio
    pin:
      number: GPIO5
    name: "Wall Switch 2"
    on_state:
      then:
        - switch.toggle: relay

sensor:
  - platform: ntc
    sensor: resistance_sensor
    id: temperature
    name: "Living room Light Switch Temperature"
    unit_of_measurement: "°C"
    accuracy_decimals: 1
    icon: mdi:thermometer
    calibration:
      b_constant: 3350
      reference_temperature: 25°C
      reference_resistance: 10kOhm
  - platform: adc
    id: source_sensor
    pin: A0
    update_interval: 10s
  - platform: resistance
    id: resistance_sensor
    sensor: source_sensor
    configuration: DOWNSTREAM
    resistor: 32kOhm
  - platform: ade7953
    voltage:
      name: "Living room Light Switch Voltage"
    current_a:
      name: "ADE7953 Current 1"
    current_b:
      name: "ADE7953 Current 2"
    active_power_a:
      name: "ADE7953 Power 1"
    active_power_b:
      name: "ADE7953 Power 2"
      filters:
      - multiply: -1.0

status_led:
  pin:
    number: GPIO0
    inverted: yes

switch:
  - platform: gpio
    id: relay
    name: "Living room Light Switch Relay"
    pin: GPIO04
    restore_mode: ALWAYS_OFF