Decoding "stange" broadcast messages for Ariston Ebus

[wrongisthenewright]

Hi,
before opening an issue I'll ask here to be sure I'm not forgetting something.
I have a working ebusd config file reading many parameters from my Ariston system (hybrid HP+boiler), I'm decoding many broadcast messages but one specific telegram didn't get decoded by ebusd.

The message is:
13fe201008c64bbe00c94b0200

In Ariston "jargon" (Bridgenet protocol over Ebus link layer) meaning is
13 fe 2010 08 c64b be00 c94b 0000 where
c64b and c94b are parameters and be00 and 0000 are, at least what I think, temp values.

I try to grab the messages with this line:
r,test,c64b_c94b_unk_13_fe,UNKN,13,fe,2010,c64b,c64b_SIN,m,SIN,10,°C,,,m,IGN:2,,,,c84b_SIN,m,SIN,10,°C

but Ebusd keeps failing with:

2023-04-10 17:24:56.073 [update info] received BC cmd: 13fe201008c64bbe00c94b0000
2023-04-10 17:24:56.073 [update notice] received unknown BC cmd: 13fe201008c64bbe00c94b0000

The only explanation I have is that the message is malformed as there's no /00 ACK at the end of the message.
Any suggestion on how to set the CSV?

TY

[DaeMonSxy]

I seem to be in a similar shoe.

Any success around Ariston csv? ( Iam having Arison Genus One 30)
Thanks

[update notice] received unknown BC cmd: 37fe20100cc04b0100091900000b190000
2025-02-08 08:58:20.939 [update notice] received unknown BC cmd: 37fe20101001910000029100000391000004910000
2025-02-08 08:58:21.053 [update notice] received unknown BC cmd: 37fe2010080591000006910000
2025-02-08 08:58:21.172 [update notice] received unknown BC cmd: 37fe20700736080802061901

[wrongisthenewright]

HI,
I have the same boiler albeit in an hybrid system that has also an HP.
My file has evolved since I posted this and solved many of the problems I had (due mostly to my not understanding on how ebusd managed broadcasted messages).

My file is here:

https://github.com/wrongisthenewright/ebusd-configuration-ariston-bridgenet

Someone reported that in a boiler only system configuration doesn't work very well, someone has then used Ysard's version of the file (he has a boiler only configuration)

https://github.com/ysard/ebusd_configuration_chaffoteaux_bridgenet

Make some test with both and see what suit you better...