+ cat /lib/dracut/dracut-055+suse.335.gccf7fbc6-150400.3.19.1 dracut-055+suse.335.gccf7fbc6-150400.3.19.1 + echo /proc/cmdline /proc/cmdline + sed -e 's/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g' /proc/cmdline BOOT_IMAGE=(loop0)/boot/vmlinuz console=tty1 console=ttyS0,115200 root=LABEL=COS_ACTIVE net.ifnames=1 cos-img/filename=/cOS/active.img panic=5 security=selinux selinux=1 modprobe.blacklist=vc4 rd.cos.oemtimeout=10 rd.cos.oemlabel=COS_OEM + '[' -f /etc/cmdline ']' + for _i in /etc/cmdline.d/*.conf + '[' -f '/etc/cmdline.d/*.conf' ']' + break + cat /proc/self/mountinfo 1 1 0:2 / / rw shared:1 - rootfs none rw 25 1 0:24 / /proc rw,nosuid,nodev,noexec,relatime shared:2 - proc proc rw 26 1 0:25 / /sys rw,nosuid,nodev,noexec,relatime shared:3 - sysfs sysfs rw 27 1 0:5 / /dev rw,nosuid shared:11 - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1048576,mode=755,inode64 28 26 0:6 / /sys/kernel/security rw,nosuid,nodev,noexec,relatime shared:4 - securityfs securityfs rw 29 27 0:26 / /dev/shm rw,nosuid,nodev shared:12 - tmpfs tmpfs rw,inode64 30 27 0:27 / /dev/pts rw,nosuid,noexec,relatime shared:13 - devpts devpts rw,gid=5,mode=620,ptmxmode=000 31 1 0:28 / /run rw,nosuid,nodev shared:14 - tmpfs tmpfs rw,size=1604640k,nr_inodes=819200,mode=755,inode64 32 26 0:29 / /sys/fs/cgroup ro,nosuid,nodev,noexec shared:5 - tmpfs tmpfs ro,size=4096k,nr_inodes=1024,mode=755,inode64 33 32 0:30 / /sys/fs/cgroup/unified rw,nosuid,nodev,noexec,relatime shared:6 - cgroup2 cgroup2 rw,nsdelegate 34 32 0:31 / /sys/fs/cgroup/systemd rw,nosuid,nodev,noexec,relatime shared:7 - cgroup cgroup rw,xattr,name=systemd 35 26 0:32 / /sys/fs/pstore rw,nosuid,nodev,noexec,relatime shared:8 - pstore pstore rw 36 26 0:33 / /sys/firmware/efi/efivars rw,nosuid,nodev,noexec,relatime shared:9 - efivarfs efivarfs ro 37 26 0:34 / /sys/fs/bpf rw,nosuid,nodev,noexec,relatime shared:10 - bpf none rw,mode=700 38 32 0:35 / /sys/fs/cgroup/misc rw,nosuid,nodev,noexec,relatime shared:15 - cgroup cgroup rw,misc 39 32 0:36 / /sys/fs/cgroup/perf_event rw,nosuid,nodev,noexec,relatime shared:16 - cgroup cgroup rw,perf_event 40 32 0:37 / /sys/fs/cgroup/cpuset rw,nosuid,nodev,noexec,relatime shared:17 - cgroup cgroup rw,cpuset 41 32 0:38 / /sys/fs/cgroup/pids rw,nosuid,nodev,noexec,relatime shared:18 - cgroup cgroup rw,pids 42 32 0:39 / /sys/fs/cgroup/devices rw,nosuid,nodev,noexec,relatime shared:19 - cgroup cgroup rw,devices 43 32 0:40 / /sys/fs/cgroup/net_cls,net_prio rw,nosuid,nodev,noexec,relatime shared:20 - cgroup cgroup rw,net_cls,net_prio 44 32 0:41 / /sys/fs/cgroup/cpu,cpuacct rw,nosuid,nodev,noexec,relatime shared:21 - cgroup cgroup rw,cpu,cpuacct 45 32 0:42 / /sys/fs/cgroup/blkio rw,nosuid,nodev,noexec,relatime shared:22 - cgroup cgroup rw,blkio 46 32 0:43 / /sys/fs/cgroup/rdma rw,nosuid,nodev,noexec,relatime shared:23 - cgroup cgroup rw,rdma 47 32 0:44 / /sys/fs/cgroup/memory rw,nosuid,nodev,noexec,relatime shared:24 - cgroup cgroup rw,memory 48 32 0:45 / /sys/fs/cgroup/hugetlb rw,nosuid,nodev,noexec,relatime shared:25 - cgroup cgroup rw,hugetlb 49 32 0:46 / /sys/fs/cgroup/freezer rw,nosuid,nodev,noexec,relatime shared:26 - cgroup cgroup rw,freezer 50 1 0:47 / /var/lib/nfs/rpc_pipefs rw,relatime shared:27 - rpc_pipefs rpc_pipefs rw 109 26 0:23 / /sys/kernel/config rw,nosuid,nodev,noexec,relatime shared:57 - configfs configfs rw 112 1 0:48 / /tmp rw,relatime shared:60 - tmpfs tmpfs rw,inode64 + cat /proc/mounts none / rootfs rw 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 devtmpfs /dev devtmpfs rw,nosuid,size=4096k,nr_inodes=1048576,mode=755,inode64 0 0 securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0 tmpfs /dev/shm tmpfs rw,nosuid,nodev,inode64 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,nodev,size=1604640k,nr_inodes=819200,mode=755,inode64 0 0 tmpfs /sys/fs/cgroup tmpfs ro,nosuid,nodev,noexec,size=4096k,nr_inodes=1024,mode=755,inode64 0 0 cgroup2 /sys/fs/cgroup/unified cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate 0 0 cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,name=systemd 0 0 pstore /sys/fs/pstore pstore rw,nosuid,nodev,noexec,relatime 0 0 efivarfs /sys/firmware/efi/efivars efivarfs ro,nosuid,nodev,noexec,relatime 0 0 none /sys/fs/bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 0 0 cgroup /sys/fs/cgroup/misc cgroup rw,nosuid,nodev,noexec,relatime,misc 0 0 cgroup /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event 0 0 cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0 cgroup /sys/fs/cgroup/pids cgroup rw,nosuid,nodev,noexec,relatime,pids 0 0 cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0 cgroup /sys/fs/cgroup/net_cls,net_prio cgroup rw,nosuid,nodev,noexec,relatime,net_cls,net_prio 0 0 cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct 0 0 cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0 cgroup /sys/fs/cgroup/rdma cgroup rw,nosuid,nodev,noexec,relatime,rdma 0 0 cgroup /sys/fs/cgroup/memory cgroup rw,nosuid,nodev,noexec,relatime,memory 0 0 cgroup /sys/fs/cgroup/hugetlb cgroup rw,nosuid,nodev,noexec,relatime,hugetlb 0 0 cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0 rpc_pipefs /var/lib/nfs/rpc_pipefs rpc_pipefs rw,relatime 0 0 configfs /sys/kernel/config configfs rw,nosuid,nodev,noexec,relatime 0 0 tmpfs /tmp tmpfs rw,relatime,inode64 0 0 + blkid /dev/sda4: LABEL="COS_PERSISTENT" UUID="587ec441-8fd7-472f-ba7d-6b332bc86e55" BLOCK_SIZE="1024" TYPE="ext4" /dev/sda2: LABEL="COS_STATE" UUID="8feef3b1-52e1-4f4e-a526-bd238880b681" BLOCK_SIZE="4096" TYPE="ext4" /dev/sda3: LABEL="COS_RECOVERY" UUID="17b273ca-1393-49e3-91b1-0a0ce2a78294" BLOCK_SIZE="4096" TYPE="ext4" /dev/sda1: LABEL_FATBOOT="COS_GRUB" LABEL="COS_GRUB" UUID="FA74-3514" BLOCK_SIZE="512" TYPE="vfat" + blkid -o udev ID_FS_LABEL=COS_PERSISTENT ID_FS_LABEL_ENC=COS_PERSISTENT ID_FS_UUID=587ec441-8fd7-472f-ba7d-6b332bc86e55 ID_FS_UUID_ENC=587ec441-8fd7-472f-ba7d-6b332bc86e55 ID_FS_BLOCK_SIZE=1024 ID_FS_TYPE=ext4 ID_FS_LABEL=COS_STATE ID_FS_LABEL_ENC=COS_STATE ID_FS_UUID=8feef3b1-52e1-4f4e-a526-bd238880b681 ID_FS_UUID_ENC=8feef3b1-52e1-4f4e-a526-bd238880b681 ID_FS_BLOCK_SIZE=4096 ID_FS_TYPE=ext4 ID_FS_LABEL=COS_RECOVERY ID_FS_LABEL_ENC=COS_RECOVERY ID_FS_UUID=17b273ca-1393-49e3-91b1-0a0ce2a78294 ID_FS_UUID_ENC=17b273ca-1393-49e3-91b1-0a0ce2a78294 ID_FS_BLOCK_SIZE=4096 ID_FS_TYPE=ext4 ID_FS_LABEL_FATBOOT=COS_GRUB ID_FS_LABEL_FATBOOT_ENC=COS_GRUB ID_FS_LABEL=COS_GRUB ID_FS_LABEL_ENC=COS_GRUB ID_FS_UUID=FA74-3514 ID_FS_UUID_ENC=FA74-3514 ID_FS_BLOCK_SIZE=512 ID_FS_TYPE=vfat + ls -l /dev/disk/by-id /dev/disk/by-label /dev/disk/by-path /dev/disk/by-uuid /dev/disk/by-id: total 0 lrwxrwxrwx 1 root root 9 Feb 28 12:00 ata-Samsung_Portable_SSD_T5_S49XNR0N800557M -> ../../sda lrwxrwxrwx 1 root root 10 Feb 28 12:00 ata-Samsung_Portable_SSD_T5_S49XNR0N800557M-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Feb 28 12:00 ata-Samsung_Portable_SSD_T5_S49XNR0N800557M-part2 -> ../../sda2 lrwxrwxrwx 1 root root 10 Feb 28 12:00 ata-Samsung_Portable_SSD_T5_S49XNR0N800557M-part3 -> ../../sda3 lrwxrwxrwx 1 root root 10 Feb 28 12:00 ata-Samsung_Portable_SSD_T5_S49XNR0N800557M-part4 -> ../../sda4 lrwxrwxrwx 1 root root 9 Feb 28 12:00 scsi-35000000000000001 -> ../../sda lrwxrwxrwx 1 root root 10 Feb 28 12:00 scsi-35000000000000001-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Feb 28 12:00 scsi-35000000000000001-part2 -> ../../sda2 lrwxrwxrwx 1 root root 10 Feb 28 12:00 scsi-35000000000000001-part3 -> ../../sda3 lrwxrwxrwx 1 root root 10 Feb 28 12:00 scsi-35000000000000001-part4 -> ../../sda4 lrwxrwxrwx 1 root root 9 Feb 28 12:00 scsi-SSamsung_Portable_SSD_T5_661438654321 -> ../../sda lrwxrwxrwx 1 root root 10 Feb 28 12:00 scsi-SSamsung_Portable_SSD_T5_661438654321-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Feb 28 12:00 scsi-SSamsung_Portable_SSD_T5_661438654321-part2 -> ../../sda2 lrwxrwxrwx 1 root root 10 Feb 28 12:00 scsi-SSamsung_Portable_SSD_T5_661438654321-part3 -> ../../sda3 lrwxrwxrwx 1 root root 10 Feb 28 12:00 scsi-SSamsung_Portable_SSD_T5_661438654321-part4 -> ../../sda4 lrwxrwxrwx 1 root root 9 Feb 28 12:00 wwn-0x5002538e00000000 -> ../../sda lrwxrwxrwx 1 root root 10 Feb 28 12:00 wwn-0x5002538e00000000-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Feb 28 12:00 wwn-0x5002538e00000000-part2 -> ../../sda2 lrwxrwxrwx 1 root root 10 Feb 28 12:00 wwn-0x5002538e00000000-part3 -> ../../sda3 lrwxrwxrwx 1 root root 10 Feb 28 12:00 wwn-0x5002538e00000000-part4 -> ../../sda4 /dev/disk/by-label: total 0 lrwxrwxrwx 1 root root 10 Feb 28 12:00 COS_GRUB -> ../../sda1 lrwxrwxrwx 1 root root 10 Feb 28 12:00 COS_PERSISTENT -> ../../sda4 lrwxrwxrwx 1 root root 10 Feb 28 12:00 COS_RECOVERY -> ../../sda3 lrwxrwxrwx 1 root root 10 Feb 28 12:00 COS_STATE -> ../../sda2 /dev/disk/by-path: total 0 lrwxrwxrwx 1 root root 9 Feb 28 12:00 platform-fd500000.pcie-pci-0000:01:00.0-usb-0:2:1.0-scsi-0:0:0:0 -> ../../sda lrwxrwxrwx 1 root root 10 Feb 28 12:00 platform-fd500000.pcie-pci-0000:01:00.0-usb-0:2:1.0-scsi-0:0:0:0-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Feb 28 12:00 platform-fd500000.pcie-pci-0000:01:00.0-usb-0:2:1.0-scsi-0:0:0:0-part2 -> ../../sda2 lrwxrwxrwx 1 root root 10 Feb 28 12:00 platform-fd500000.pcie-pci-0000:01:00.0-usb-0:2:1.0-scsi-0:0:0:0-part3 -> ../../sda3 lrwxrwxrwx 1 root root 10 Feb 28 12:00 platform-fd500000.pcie-pci-0000:01:00.0-usb-0:2:1.0-scsi-0:0:0:0-part4 -> ../../sda4 /dev/disk/by-uuid: total 0 lrwxrwxrwx 1 root root 10 Feb 28 12:00 17b273ca-1393-49e3-91b1-0a0ce2a78294 -> ../../sda3 lrwxrwxrwx 1 root root 10 Feb 28 12:00 587ec441-8fd7-472f-ba7d-6b332bc86e55 -> ../../sda4 lrwxrwxrwx 1 root root 10 Feb 28 12:00 8feef3b1-52e1-4f4e-a526-bd238880b681 -> ../../sda2 lrwxrwxrwx 1 root root 10 Feb 28 12:00 FA74-3514 -> ../../sda1 + for _i in /etc/conf.d/*.conf + '[' -f /etc/conf.d/systemd.conf ']' + echo /etc/conf.d/systemd.conf /etc/conf.d/systemd.conf + sed -e 's/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g' /etc/conf.d/systemd.conf systemdutildir="/usr/lib/systemd" systemdsystemunitdir="/usr/lib/systemd/system" systemdsystemconfdir="/etc/systemd/system" + command -v lvm + lvm pvdisplay WARNING: locking_type (4) is deprecated, using --sysinit --readonly. + lvm vgdisplay WARNING: locking_type (4) is deprecated, using --sysinit --readonly. + lvm lvdisplay WARNING: locking_type (4) is deprecated, using --sysinit --readonly. + command -v dmsetup + dmsetup ls --tree No devices found + cat /proc/mdstat cat: /proc/mdstat: No such file or directory + command -v ip + ip addr 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether dc:a6:32:c2:0b:b8 brd ff:ff:ff:ff:ff:ff + command -v journalctl + journalctl -ab --no-pager -o short-monotonic + sed -e 's/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g' [ 0.000000] localhost kernel: Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] localhost kernel: Linux version 5.14.21-150400.24.60-default (geeko@buildhost) (gcc (SUSE Linux) 7.5.0, GNU ld (GNU Binutils; SUSE Linux Enterprise 15) 2.39.0.20220810-150100.7.40) #1 SMP PREEMPT_DYNAMIC Wed Apr 12 12:13:32 UTC 2023 (93dbe2e) [ 0.000000] localhost kernel: Machine model: Raspberry Pi 4 Model B Rev 1.4 [ 0.000000] localhost kernel: efi: EFI v2.80 by Das U-Boot [ 0.000000] localhost kernel: efi: RTPROP=0x3ca22040 SMBIOS=0x3ca1e000 MEMRESERVE=0x27473040 [ 0.000000] localhost kernel: Reserved memory: created CMA memory pool at 0x0000000023000000, size 64 MiB [ 0.000000] localhost kernel: OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] localhost kernel: NUMA: No NUMA configuration found [ 0.000000] localhost kernel: NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] localhost kernel: NUMA: NODE_DATA [mem 0x1fefe2400-0x1fefe6fff] [ 0.000000] localhost kernel: Zone ranges: [ 0.000000] localhost kernel: DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] localhost kernel: DMA32 [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] localhost kernel: Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] localhost kernel: Device empty [ 0.000000] localhost kernel: Movable zone start for each node [ 0.000000] localhost kernel: Early memory node ranges [ 0.000000] localhost kernel: node 0: [mem 0x0000000000000000-0x000000003ca15fff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ca16000-0x000000003ca1cfff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ca1d000-0x000000003ca1dfff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ca1e000-0x000000003ca1efff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ca1f000-0x000000003ca20fff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ca21000-0x000000003ca24fff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ca25000-0x000000003ca25fff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ca26000-0x000000003ca2afff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ca2b000-0x000000003ca2bfff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ca2c000-0x000000003ca2cfff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ca2d000-0x000000003ca2dfff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ca2e000-0x000000003ca2efff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ca2f000-0x000000003ca2ffff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ca30000-0x000000003ca30fff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ca31000-0x000000003ca32fff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ca33000-0x000000003ca33fff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ca34000-0x000000003de3ffff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003de40000-0x000000003de4ffff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003de50000-0x000000003defffff] [ 0.000000] localhost kernel: node 0: [mem 0x000000003ee5c000-0x000000003ee5cfff] [ 0.000000] localhost kernel: node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] localhost kernel: node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] localhost kernel: Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] localhost kernel: On node 0, zone DMA: 256 pages in unavailable ranges [ 0.000000] localhost kernel: percpu: Embedded 30 pages/cpu s83992 r8192 d30696 u122880 [ 0.000000] localhost kernel: pcpu-alloc: s83992 r8192 d30696 u122880 alloc=30*4096 [ 0.000000] localhost kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] localhost kernel: Detected PIPT I-cache on CPU0 [ 0.000000] localhost kernel: CPU features: detected: Spectre-v2 [ 0.000000] localhost kernel: CPU features: detected: Spectre-v3a [ 0.000000] localhost kernel: CPU features: detected: Spectre-v4 [ 0.000000] localhost kernel: CPU features: detected: Spectre-BHB [ 0.000000] localhost kernel: CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] localhost kernel: CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] localhost kernel: CPU features: detected: ARM erratum 1742098 [ 0.000000] localhost kernel: CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] localhost kernel: Fallback order for Node 0: 0 [ 0.000000] localhost kernel: Built 1 zonelists, mobility grouping on. Total pages: 2039553 [ 0.000000] localhost kernel: Policy zone: Normal [ 0.000000] localhost kernel: Kernel command line: BOOT_IMAGE=(loop0)/boot/vmlinuz console=tty1 console=ttyS0,115200 root=LABEL=COS_ACTIVE net.ifnames=1 cos-img/filename=/cOS/active.img panic=5 security=selinux selinux=1 modprobe.blacklist=vc4 rd.cos.oemtimeout=10 rd.cos.oemlabel=COS_OEM [ 0.000000] localhost kernel: Unknown kernel command line parameters "BOOT_IMAGE=(loop0)/boot/vmlinuz cos-img/filename=/cOS/active.img", will be passed to user space. [ 0.000000] localhost kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] localhost kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] localhost kernel: mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] localhost kernel: software IO TLB: mapped [mem 0x0000000038a16000-0x000000003ca16000] (64MB) [ 0.000000] localhost kernel: Memory: 3994400K/8289284K available (14336K kernel code, 3336K rwdata, 11144K rodata, 6784K init, 1864K bss, 335568K reserved, 65536K cma-reserved) [ 0.000000] localhost kernel: random: get_random_u64 called from __kmem_cache_create+0x34/0x540 with crng_init=0 [ 0.000000] localhost kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] localhost kernel: ftrace: allocating 44933 entries in 176 pages [ 0.000000] localhost kernel: ftrace: allocated 176 pages with 3 groups [ 0.000000] localhost kernel: trace event string verifier disabled [ 0.000000] localhost kernel: Dynamic Preempt: none [ 0.000000] localhost kernel: rcu: Preemptible hierarchical RCU implementation. [ 0.000000] localhost kernel: rcu: RCU event tracing is enabled. [ 0.000000] localhost kernel: rcu: RCU restricting CPUs from NR_CPUS=768 to nr_cpu_ids=4. [ 0.000000] localhost kernel: Trampoline variant of Tasks RCU enabled. [ 0.000000] localhost kernel: Rude variant of Tasks RCU enabled. [ 0.000000] localhost kernel: Tracing variant of Tasks RCU enabled. [ 0.000000] localhost kernel: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] localhost kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] localhost kernel: NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] localhost kernel: Root IRQ handler: gic_handle_irq [ 0.000000] localhost kernel: GIC: Using split EOI/Deactivate mode [ 0.000000] localhost kernel: irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10) [ 0.000000] localhost kernel: arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] localhost kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000001] localhost kernel: sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000612] localhost kernel: Console: colour dummy device 80x25 [ 0.001508] localhost kernel: printk: console [tty1] enabled [ 0.001536] localhost kernel: serial port 0 not yet initialized [ 0.001633] localhost kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.001669] localhost kernel: pid_max: default: 32768 minimum: 301 [ 0.001807] localhost kernel: LSM: Security Framework initializing [ 0.001895] localhost kernel: SELinux: Initializing. [ 0.002192] localhost kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002310] localhost kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.004729] localhost kernel: rcu: Hierarchical SRCU implementation. [ 0.008561] localhost kernel: Remapping and enabling EFI services. [ 0.009176] localhost kernel: smp: Bringing up secondary CPUs ... [ 0.009858] localhost kernel: Detected PIPT I-cache on CPU1 [ 0.009935] localhost kernel: CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.010660] localhost kernel: Detected PIPT I-cache on CPU2 [ 0.010710] localhost kernel: CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.011407] localhost kernel: Detected PIPT I-cache on CPU3 [ 0.011457] localhost kernel: CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.011569] localhost kernel: smp: Brought up 1 node, 4 CPUs [ 0.011663] localhost kernel: SMP: Total of 4 processors activated. [ 0.011681] localhost kernel: CPU features: detected: 32-bit EL0 Support [ 0.011696] localhost kernel: CPU features: detected: 32-bit EL1 Support [ 0.011714] localhost kernel: CPU features: detected: CRC32 instructions [ 0.025031] localhost kernel: CPU: All CPU(s) started at EL2 [ 0.025095] localhost kernel: alternatives: patching kernel code [ 0.126949] localhost kernel: node 0 deferred pages initialised in 100ms [ 0.129565] localhost kernel: devtmpfs: initialized [ 0.143971] localhost kernel: Registered cp15_barrier emulation handler [ 0.144028] localhost kernel: Registered setend emulation handler [ 0.144052] localhost kernel: KASLR enabled [ 0.144316] localhost kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.144358] localhost kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.146953] localhost kernel: pinctrl core: initialized pinctrl subsystem [ 0.148295] localhost kernel: SMBIOS 3.0 present. [ 0.148333] localhost kernel: DMI: raspberrypi rpi/rpi, BIOS 2021.01 04/19/2021 [ 0.149041] localhost kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.150943] localhost kernel: DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.151219] localhost kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.151671] localhost kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.151757] localhost kernel: audit: initializing netlink subsys (disabled) [ 0.151952] localhost kernel: audit: type=2000 audit(0.150:1): state=initialized audit_enabled=0 res=1 [ 0.153426] localhost kernel: thermal_sys: Registered thermal governor 'fair_share' [ 0.153436] localhost kernel: thermal_sys: Registered thermal governor 'bang_bang' [ 0.153460] localhost kernel: thermal_sys: Registered thermal governor 'step_wise' [ 0.153477] localhost kernel: thermal_sys: Registered thermal governor 'user_space' [ 0.153710] localhost kernel: cpuidle: using governor ladder [ 0.153766] localhost kernel: cpuidle: using governor menu [ 0.154002] localhost kernel: hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.154151] localhost kernel: ASID allocator initialised with 32768 entries [ 0.155839] localhost kernel: Serial: AMBA PL011 UART driver [ 0.191788] localhost kernel: HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.191837] localhost kernel: HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.191860] localhost kernel: HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.191881] localhost kernel: HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.584312] localhost kernel: ACPI: Interpreter disabled. [ 0.585239] localhost kernel: iommu: Default domain type: Passthrough [ 0.585615] localhost kernel: vgaarb: loaded [ 0.586069] localhost kernel: pps_core: LinuxPPS API ver. 1 registered [ 0.586090] localhost kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.586123] localhost kernel: PTP clock support registered [ 0.586325] localhost kernel: EDAC MC: Ver: 3.0.0 [ 0.587114] localhost kernel: Registered efivars operations [ 0.587548] localhost kernel: ima: secureboot mode disabled [ 0.588693] localhost kernel: NetLabel: Initializing [ 0.588718] localhost kernel: NetLabel: domain hash size = 128 [ 0.588734] localhost kernel: NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.588813] localhost kernel: NetLabel: unlabeled traffic allowed by default [ 0.600657] localhost kernel: clocksource: Switched to clocksource arch_sys_counter [ 0.669560] localhost kernel: VFS: Disk quotas dquot_6.6.0 [ 0.669671] localhost kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.670057] localhost kernel: pnp: PnP ACPI: disabled [ 0.679387] localhost kernel: NET: Registered PF_INET protocol family [ 0.680321] localhost kernel: IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.685890] localhost kernel: tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.686002] localhost kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.686431] localhost kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.687441] localhost kernel: TCP: Hash tables configured (established 65536 bind 65536) [ 0.688097] localhost kernel: MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.688319] localhost kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.688434] localhost kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.688764] localhost kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.688808] localhost kernel: NET: Registered PF_XDP protocol family [ 0.688834] localhost kernel: PCI: CLS 0 bytes, default 64 [ 0.689497] localhost kernel: Trying to unpack rootfs image as initramfs... [ 0.701849] localhost kernel: hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.702118] localhost kernel: kvm [1]: IPA Size Limit: 44 bits [ 0.705031] localhost kernel: kvm [1]: vgic interrupt IRQ9 [ 0.705249] localhost kernel: kvm [1]: Hyp mode initialized successfully [ 0.707692] localhost kernel: Initialise system trusted keyrings [ 0.707748] localhost kernel: Key type blacklist registered [ 0.708039] localhost kernel: workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 0.715574] localhost kernel: zbud: loaded [ 0.717197] localhost kernel: integrity: Platform Keyring initialized [ 3.956908] localhost kernel: Key type asymmetric registered [ 3.956960] localhost kernel: Asymmetric key parser 'x509' registered [ 3.957041] localhost kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 3.957312] localhost kernel: io scheduler mq-deadline registered [ 3.957334] localhost kernel: io scheduler kyber registered [ 3.957511] localhost kernel: io scheduler bfq registered [ 3.967007] localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.988627] localhost kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.990553] localhost kernel: bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [ 3.991016] localhost kernel: printk: console [ttyS0] disabled [ 3.991128] localhost kernel: fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 24, base_baud = 62499999) is a 16550 [ 5.244297] localhost kernel: printk: console [ttyS0] enabled [ 5.251071] localhost kernel: Serial: AMBA driver [ 5.255732] localhost kernel: msm_serial: driver initialized [ 5.263185] localhost kernel: cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 5.271107] localhost kernel: bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 5.280985] localhost kernel: libphy: Fixed MDIO Bus: probed [ 5.286966] localhost kernel: mousedev: PS/2 mouse device common for all mice [ 5.299050] localhost kernel: ledtrig-cpu: registered to indicate activity on CPUs [ 5.306619] localhost kernel: efifb: probing for efifb [ 5.311321] localhost kernel: efifb: framebuffer at 0x3e2fe000, using 8100k, total 8100k [ 5.318665] localhost kernel: efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 5.325577] localhost kernel: efifb: scrolling: redraw [ 5.329915] localhost kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 5.354908] localhost kernel: Console: switching to colour frame buffer device 240x67 [ 5.380076] localhost kernel: fb0: EFI VGA frame buffer device [ 5.386133] localhost kernel: hid: raw HID events driver (C) Jiri Kosina [ 5.392727] localhost kernel: bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 18.720905] localhost kernel: Freeing initrd memory: 62688K [ 18.727609] localhost kernel: drop_monitor: Initializing network drop monitor service [ 18.735696] localhost kernel: NET: Registered PF_INET6 protocol family [ 18.765276] localhost kernel: Segment Routing with IPv6 [ 18.769797] localhost kernel: RPL Segment Routing with IPv6 [ 18.775857] localhost kernel: registered taskstats version 1 [ 18.781097] localhost kernel: Loading compiled-in X.509 certificates [ 18.786915] localhost kernel: Loaded X.509 cert 'SUSE Linux Enterprise Secure Boot Signkey: a746b64b6cb71f13385638055f46162bac632acd' [ 18.798687] localhost kernel: zswap: loaded using pool lzo/zbud [ 18.804203] localhost kernel: page_owner is disabled [ 18.808694] localhost kernel: Key type ._fscrypt registered [ 18.813576] localhost kernel: Key type .fscrypt registered [ 18.818328] localhost kernel: Key type fscrypt-provisioning registered [ 18.846343] localhost kernel: Key type encrypted registered [ 18.851407] localhost kernel: ima: No TPM chip found, activating TPM-bypass! [ 18.857791] localhost kernel: Loading compiled-in module X.509 certificates [ 18.864237] localhost kernel: Loaded X.509 cert 'SUSE Linux Enterprise Secure Boot Signkey: a746b64b6cb71f13385638055f46162bac632acd' [ 18.875710] localhost kernel: ima: Allocated hash algorithm: sha256 [ 18.881330] localhost kernel: ima: No architecture policies found [ 18.886769] localhost kernel: evm: Initialising EVM extended attributes: [ 18.892783] localhost kernel: evm: security.selinux [ 18.896908] localhost kernel: evm: security.SMACK64 (disabled) [ 18.902026] localhost kernel: evm: security.SMACK64EXEC (disabled) [ 18.907490] localhost kernel: evm: security.SMACK64TRANSMUTE (disabled) [ 18.913408] localhost kernel: evm: security.SMACK64MMAP (disabled) [ 18.918872] localhost kernel: evm: security.apparmor [ 18.923093] localhost kernel: evm: security.ima [ 18.926860] localhost kernel: evm: security.capability [ 18.931261] localhost kernel: evm: HMAC attrs: 0x1 [ 18.941723] localhost kernel: uart-pl011 fe201000.serial: there is not valid maps for state default [ 18.950421] localhost kernel: fe201000.serial: ttyAMA1 at MMIO 0xfe201000 (irq = 23, base_baud = 0) is a PL011 rev2 [ 18.960585] localhost kernel: serial serial0: tty port ttyAMA1 registered [ 18.967917] localhost kernel: raspberrypi-firmware soc:firmware: Attached to firmware from 2021-03-10T10:12:47 [ 19.002265] localhost kernel: Freeing unused kernel memory: 6784K [ 19.030754] localhost kernel: Run /init as init process [ 19.035244] localhost kernel: with arguments: [ 19.035254] localhost kernel: /init [ 19.035261] localhost kernel: with environment: [ 19.035266] localhost kernel: HOME=/ [ 19.035272] localhost kernel: TERM=linux [ 19.035278] localhost kernel: BOOT_IMAGE=(loop0)/boot/vmlinuz [ 19.035284] localhost kernel: cos-img/filename=/cOS/active.img [ 19.059757] localhost systemd[1]: System time before build time, advancing clock. [ 19.346551] localhost systemd[1]: systemd 249.16+suse.171.gdad0071f15 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR -IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 19.381653] localhost systemd[1]: Detected architecture arm64. [ 19.392419] localhost systemd[1]: Running in initial RAM disk. [ 19.590990] localhost systemd[1]: No hostname configured, using default hostname. [ 19.603778] localhost systemd[1]: Hostname set to . [ 19.614864] localhost kernel: random: systemd: uninitialized urandom read (16 bytes read) [ 19.627236] localhost systemd[1]: Initializing machine ID from random generator. [ 19.702125] localhost kernel: random: ln: uninitialized urandom read (6 bytes read) [ 19.703457] localhost kernel: random: ln: uninitialized urandom read (6 bytes read) [ 20.063826] localhost systemd[1]: Queued start job for default target Initrd Default Target. [ 20.115886] localhost systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 20.161120] localhost systemd[1]: Reached target Local Encrypted Volumes. [ 20.200961] localhost systemd[1]: Reached target Initrd /usr File System. [ 20.240857] localhost systemd[1]: Reached target Local File Systems. [ 20.280832] localhost systemd[1]: Reached target Path Units. [ 20.320887] localhost systemd[1]: Reached target Slice Units. [ 20.360867] localhost systemd[1]: Reached target Swaps. [ 20.400842] localhost systemd[1]: Reached target Timer Units. [ 20.441172] localhost systemd[1]: Listening on Open-iSCSI iscsid Socket. [ 20.481466] localhost systemd[1]: Listening on Journal Socket (/dev/log). [ 20.521563] localhost systemd[1]: Listening on Journal Socket. [ 20.561575] localhost systemd[1]: Listening on udev Control Socket. [ 20.601388] localhost systemd[1]: Listening on udev Kernel Socket. [ 20.640890] localhost systemd[1]: Reached target Socket Units. [ 20.688143] localhost systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm. [ 20.737722] localhost systemd[1]: Starting Create List of Static Device Nodes... [ 20.786981] localhost systemd[1]: Started Hardware RNG Entropy Gatherer Daemon. [ 20.839998] localhost systemd[1]: Starting Journal Service... [ 20.888031] localhost systemd[1]: Starting Load Kernel Modules... [ 20.941589] localhost systemd[1]: Condition check resulted in Merge System Extension Images into /usr/ and /opt/ being skipped. [ 20.962158] localhost kernel: SCSI subsystem initialized [ 20.964186] localhost systemd[1]: Starting Setup Virtual Console... [ 20.966309] localhost systemd-journald[232]: Journal started [ 20.966667] localhost systemd-journald[232]: Runtime Journal (/run/log/journal/6f6b021417ec4f8f80d8bdac12166d2b) is 8.0M, max 156.7M, 148.7M free. [ 20.967358] localhost haveged[227]: haveged: command socket is listening at fd 3 [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: read error [ 20.969853] localhost rngd[231]: No entropy sources working, exiting rngd [ 20.982856] localhost kernel: alua: device handler registered [ 20.992605] localhost systemd-modules-load[233]: Inserted module 'scsi_dh_alua' [ 20.998029] localhost kernel: emc: device handler registered [ 21.007200] localhost systemd-modules-load[233]: Inserted module 'scsi_dh_emc' [ 21.022369] localhost systemd-modules-load[233]: Inserted module 'scsi_dh_rdac' [ 21.012774] localhost kernel: rdac: device handler registered [ 21.024536] localhost systemd[1]: Started Journal Service. [ 21.066535] localhost systemd[1]: Finished Create List of Static Device Nodes. [ 21.053845] localhost kernel: device-mapper: uevent: version 1.0.3 [ 21.064542] localhost kernel: device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 21.087206] localhost systemd-modules-load[233]: Inserted module 'dm_multipath' [ 21.098676] localhost systemd-modules-load[233]: Inserted module 'sg' [ 21.122311] localhost systemd[1]: rngd.service: Deactivated successfully. [ 21.128877] localhost systemd[1]: Finished Load Kernel Modules. [ 21.164088] localhost systemd[1]: Finished Setup Virtual Console. [ 21.191717] localhost systemd[1]: Condition check resulted in dracut ask for additional cmdline parameters being skipped. [ 21.197883] localhost systemd[1]: Starting dracut cmdline hook... [ 21.236109] localhost systemd[1]: Starting Apply Kernel Variables... [ 21.273752] localhost dracut-cmdline[240]: dracut-15.4 dracut-055+suse.335.gccf7fbc6-150400.3.19.1 [ 21.275998] localhost systemd[1]: Starting Create Static Device Nodes in /dev... [ 21.292377] localhost dracut-cmdline[240]: Using kernel command line parameters: BOOT_IMAGE=(loop0)/boot/vmlinuz console=tty1 console=ttyS0,115200 root=LABEL=COS_ACTIVE net.ifnames=1 cos-img/filename=/cOS/active.img panic=5 security=selinux selinux=1 modprobe.blacklist=vc4 rd.cos.oemtimeout=10 rd.cos.oemlabel=COS_OEM [ 21.316223] localhost systemd[1]: Starting Create Volatile Files and Directories... [ 21.356785] localhost systemd[1]: Finished Apply Kernel Variables. [ 21.394695] localhost systemd[1]: Finished Create Static Device Nodes in /dev. [ 21.434481] localhost systemd[1]: Finished Create Volatile Files and Directories. [ 21.914484] localhost kernel: random: crng init done [ 21.923196] localhost kernel: random: 7 urandom warning(s) missed due to ratelimiting [ 21.937524] localhost kernel: Loading iSCSI transport class v2.0-870. [ 21.980263] localhost kernel: iscsi: registered transport (tcp) [ 22.062274] localhost kernel: iscsi: registered transport (qla4xxx) [ 22.072477] localhost kernel: QLogic iSCSI HBA Driver [ 22.103260] localhost kernel: libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015) [ 22.161366] localhost kernel: Chelsio T3 iSCSI Driver cxgb3i v2.0.1-ko (Apr. 2015) [ 22.172973] localhost kernel: iscsi: registered transport (cxgb3i) [ 22.312321] localhost kernel: Chelsio T4-T6 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015) [ 22.324148] localhost kernel: iscsi: registered transport (cxgb4i) [ 22.334120] localhost kernel: cxgb4i:cxgb4i_init_module: cxgb4i dcb enabled. [ 22.372914] localhost kernel: cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) [ 22.399213] localhost kernel: QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014) [ 22.411909] localhost kernel: iscsi: registered transport (bnx2i) [ 22.447446] localhost kernel: iscsi: registered transport (be2iscsi) [ 22.457766] localhost kernel: In beiscsi_module_init, tt=00000000166b97a2 [ 22.883651] localhost systemd[1]: Finished dracut cmdline hook. [ 22.916826] localhost systemd[1]: Starting dracut pre-udev hook... [ 23.236615] localhost kernel: RPC: Registered named UNIX socket transport module. [ 23.248194] localhost kernel: RPC: Registered udp transport module. [ 23.258469] localhost kernel: RPC: Registered tcp transport module. [ 23.268727] localhost kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. [ 23.448609] localhost rpc.statd[502]: Version 2.1.1 starting [ 23.500250] localhost rpc.statd[502]: Initializing NSM state [ 23.537665] localhost rpc.statd[502]: Running as root. chown /var/lib/nfs to choose different user [ 23.693234] localhost systemd[1]: Finished dracut pre-udev hook. [ 23.728816] localhost systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 23.852649] localhost systemd[1]: Started Rule-based Manager for Device Events and Files. [ 23.896435] localhost systemd[1]: Starting dracut pre-trigger hook... [ 23.977849] localhost dracut-pre-trigger[534]: rd.md=0: removing MD RAID activation [ 24.116431] localhost systemd[1]: Finished dracut pre-trigger hook. [ 24.156235] localhost systemd[1]: Starting Coldplug All udev Devices... [ 24.639535] localhost systemd[1]: Created slice Slice /system/modprobe. [ 24.676350] localhost systemd[1]: Starting Load Kernel Module configfs... [ 24.704129] localhost kernel: usb_phy_generic phy: supply vcc not found, using dummy regulator [ 24.717543] localhost kernel: usb_phy_generic phy: dummy supplies not allowed for exclusive requests [ 24.737803] localhost systemd[1]: Finished Coldplug All udev Devices. [ 24.759281] localhost systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 24.759643] localhost systemd[1]: Finished Load Kernel Module configfs. [ 24.746946] localhost kernel: bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 24.765683] localhost kernel: sdhci: Secure Digital Host Controller Interface driver [ 24.765699] localhost kernel: sdhci: Copyright(c) Pierre Ossman [ 24.769944] localhost kernel: brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 24.797938] localhost kernel: sdhci-pltfm: SDHCI platform and OF driver helper [ 24.802571] localhost kernel: brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 24.828315] localhost kernel: brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 24.841692] localhost kernel: brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [ 24.850801] localhost kernel: bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 24.860092] localhost kernel: libphy: bcmgenet MII bus: probed [ 24.877265] localhost kernel: brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 24.903328] localhost systemd[1]: Mounting Kernel Configuration File System... [ 24.891282] localhost kernel: brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 24.933466] localhost kernel: mmc1: SDHCI controller on fe300000.mmcnr [fe300000.mmcnr] using PIO [ 24.933759] localhost kernel: brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 24.971164] localhost systemd[1]: Starting dracut initqueue hook... [ 24.996044] localhost kernel: mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 25.032687] localhost systemd[1]: Starting Wait for udev To Complete Device Initialization... [ 25.023051] localhost kernel: brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 25.034681] localhost kernel: pci_bus 0000:00: root bus resource [bus 00-ff] [ 25.034709] localhost kernel: pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 25.034768] localhost kernel: pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 25.034870] localhost kernel: pci 0000:00:00.0: PME# supported from D0 D3hot [ 25.039968] localhost kernel: mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 25.053642] localhost kernel: mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 25.059648] localhost kernel: pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 25.100885] localhost kernel: unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 25.106909] localhost kernel: pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 25.155440] localhost kernel: pci 0000:01:00.0: PME# supported from D0 D3hot [ 25.168475] localhost kernel: mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 25.195330] localhost systemd[1]: Mounted Kernel Configuration File System. [ 25.182398] localhost kernel: mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 25.194841] localhost kernel: pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff] [ 25.196911] localhost kernel: mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 25.207566] localhost kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 25.233789] localhost kernel: pci 0000:00:00.0: PCI bridge to [bus 01] [ 25.233813] localhost kernel: pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 25.241284] localhost kernel: pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 25.271922] localhost (udev-worker)[569]: Using default interface naming scheme 'sle15-sp4'. [ 25.271133] localhost kernel: pcieport 0000:00:00.0: PME: Signaling with IRQ 66 [ 25.287078] localhost kernel: pcieport 0000:00:00.0: AER: enabled with IRQ 66 [ 25.327415] localhost udevadm[604]: systemd-udev-settle.service is deprecated. Please fix immucore.service not to pull it in. [ 25.357138] localhost kernel: mmc1: new high speed SDIO card at address 0001 [ 25.376153] localhost kernel: usbcore: registered new interface driver usbfs [ 25.387172] localhost kernel: usbcore: registered new interface driver hub [ 25.398001] localhost kernel: usbcore: registered new device driver usb [ 25.513963] localhost kernel: xhci_hcd 0000:01:00.0: VL805 firmware version 000138a1 [ 25.525763] localhost kernel: xhci_hcd 0000:01:00.0: xHCI Host Controller [ 25.536379] localhost kernel: xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 25.549661] localhost kernel: xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890 [ 25.565324] localhost kernel: xhci_hcd 0000:01:00.0: xHCI Host Controller [ 25.575951] localhost kernel: xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 25.588746] localhost kernel: xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 25.600762] localhost kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14 [ 25.614534] localhost kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 25.627212] localhost kernel: usb usb1: Product: xHCI Host Controller [ 25.637452] localhost kernel: usb usb1: Manufacturer: Linux 5.14.21-150400.24.60-default xhci-hcd [ 25.650150] localhost kernel: usb usb1: SerialNumber: 0000:01:00.0 [ 25.660824] localhost kernel: hub 1-0:1.0: USB hub found [ 25.669950] localhost kernel: hub 1-0:1.0: 1 port detected [ 25.680305] localhost kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14 [ 25.694026] localhost kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 25.706770] localhost kernel: usb usb2: Product: xHCI Host Controller [ 25.716965] localhost kernel: usb usb2: Manufacturer: Linux 5.14.21-150400.24.60-default xhci-hcd [ 25.729626] localhost kernel: usb usb2: SerialNumber: 0000:01:00.0 [ 25.740357] localhost kernel: hub 2-0:1.0: USB hub found [ 25.749541] localhost kernel: hub 2-0:1.0: 4 ports detected [ 25.806671] localhost systemd[1]: Finished Wait for udev To Complete Device Initialization. [ 25.840898] localhost systemd[1]: Reached target System Initialization. [ 25.870449] localhost systemd[1]: Reached target Basic System. [ 25.906114] localhost systemd[1]: Starting immucore... [ 25.980459] localhost immucore[625]:  INF Immucore commit=none compiled with=go1.20.2 version=v0.0.1 [ 25.970724] localhost kernel: usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 26.020740] localhost immucore[625]:  INF Booting on active/passive/recovery. [ 26.020740] localhost immucore[625]:  ERR blkid error="exit status 2" [ 26.020740] localhost immucore[625]:  ERR blkid error="exit status 2" [ 26.140266] localhost immucore[625]:  INF 1. [ 26.140266] localhost immucore[625]: (background: false) (weak: false) (run: false) [ 26.140266] localhost immucore[625]: 2. [ 26.140266] localhost immucore[625]: (background: false) (weak: false) (run: false) [ 26.140266] localhost immucore[625]: (background: false) (weak: false) (run: false) [ 26.140266] localhost immucore[625]: (background: false) (weak: false) (run: false) [ 26.140266] localhost immucore[625]: 3. [ 26.140266] localhost immucore[625]: (background: false) (weak: false) (run: false) [ 26.140266] localhost immucore[625]: 4. [ 26.140266] localhost immucore[625]: (background: false) (weak: false) (run: false) [ 26.140266] localhost immucore[625]: 5. [ 26.140266] localhost immucore[625]: (background: false) (weak: false) (run: false) [ 26.140266] localhost immucore[625]: 6. [ 26.140266] localhost immucore[625]: (background: false) (weak: false) (run: false) [ 26.140266] localhost immucore[625]: 7. [ 26.140266] localhost immucore[625]: (background: false) (weak: false) (run: false) [ 26.140266] localhost immucore[625]: 8. [ 26.140266] localhost immucore[625]: (background: false) (weak: false) (run: false) [ 26.140266] localhost immucore[625]: (background: false) (weak: false) (run: false) [ 26.140266] localhost immucore[625]: 9. [ 26.140266] localhost immucore[625]: (background: false) (weak: false) (run: false) [ 26.140266] localhost immucore[625]: 10. [ 26.140266] localhost immucore[625]: (background: false) (weak: false) (run: false) [ 26.140266] localhost immucore[625]: 11. [ 26.140266] localhost immucore[625]: (background: false) (weak: false) (run: false) [ 26.140266] localhost immucore[625]: 12. [ 26.140266] localhost immucore[625]: (background: false) (weak: false) (run: false) [ 26.140266] localhost immucore[625]:  INF Setting sentinel file to=active_mode [ 26.163319] localhost kernel: usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 26.177062] localhost kernel: usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 26.189678] localhost kernel: usb 1-1: Product: USB2.0 Hub [ 26.191405] localhost kernel: hub 1-1:1.0: USB hub found [ 26.208340] localhost kernel: hub 1-1:1.0: 4 ports detected [ 26.311109] localhost kernel: usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 26.361989] localhost kernel: usb 2-2: New USB device found, idVendor=04e8, idProduct=61f5, bcdDevice= 1.00 [ 26.375989] localhost kernel: usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 26.388805] localhost kernel: usb 2-2: Product: Portable SSD T5 [ 26.398451] localhost kernel: usb 2-2: Manufacturer: Samsung [ 26.407738] localhost kernel: usb 2-2: SerialNumber: 123456834166 [ 26.451408] localhost kernel: usbcore: registered new interface driver usb-storage [ 26.481770] localhost kernel: scsi host0: uas [ 26.490370] localhost kernel: usbcore: registered new interface driver uas [ 26.502025] localhost kernel: scsi 0:0:0:0: Direct-Access Samsung Portable SSD T5 0 PQ: 0 ANSI: 6 [ 26.517848] localhost kernel: scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 26.544990] localhost kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 26.558790] localhost kernel: sd 0:0:0:0: [sda] Write Protect is off [ 26.568908] localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 26.569272] localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.584800] localhost kernel: sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes [ 26.590680] localhost kernel: usb 1-1.4: new low-speed USB device number 3 using xhci_hcd [ 26.666428] localhost kernel: sda: sda1 sda2 sda3 sda4 [ 26.741636] localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk [ 26.779258] localhost kernel: usb 1-1.4: New USB device found, idVendor=046d, idProduct=c517, bcdDevice=38.10 [ 26.793138] localhost kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 26.805887] localhost kernel: usb 1-1.4: Product: USB Receiver [ 26.815549] localhost kernel: usb 1-1.4: Manufacturer: Logitech [ 26.891856] localhost kernel: usbcore: registered new interface driver usbhid [ 26.903106] localhost kernel: usbhid: USB HID core driver [ 26.927083] localhost kernel: input: Logitech USB Receiver as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C517.0001/input/input0 [ 27.011739] localhost kernel: hid-generic 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-1.4/input0 [ 27.031774] localhost kernel: input: Logitech USB Receiver Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C517.0002/input/input1 [ 27.055557] localhost kernel: input: Logitech USB Receiver Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C517.0002/input/input2 [ 27.141196] localhost kernel: input: Logitech USB Receiver System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C517.0002/input/input3 [ 27.165033] localhost kernel: hid-generic 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-1.4/input1 [ 27.282462] localhost immucore[625]:  INF mount done options=["rw"] type=tmpfs what=tmpfs where=/tmp [ 27.282462] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 27.471003] localhost kernel: logitech-djreceiver 0003:046D:C517.0001: hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-1.4/input0 [ 27.842867] localhost kernel: logitech-djreceiver 0003:046D:C517.0002: hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-1.4/input1 [ 27.945295] localhost kernel: logitech-djreceiver 0003:046D:C517.0002: device of type 27 Mhz (0x02) connected on slot 1 [ 27.961296] localhost kernel: logitech-djreceiver 0003:046D:C517.0002: Keyboard events are send over the air in plain-text / unencrypted [ 27.978386] localhost kernel: logitech-djreceiver 0003:046D:C517.0002: See: https://gitlab.freedesktop.org/jwrdegoede/logitech-27mhz-keyboard-encryption-setup/ [ 27.997588] localhost kernel: logitech-djreceiver 0003:046D:C517.0002: device of type 27 Mhz (0x02) connected on slot 3 [ 28.014784] localhost kernel: input: Logitech Wireless Mouse PID:003f Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C517.0002/0003:046D:003F.0003/input/input6 [ 28.041384] localhost kernel: hid-generic 0003:046D:003F.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:003f] on usb-0000:01:00.0-1.4/input1:1 [ 28.065403] localhost kernel: input: Logitech Wireless Keyboard PID:0065 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C517.0002/0003:046D:0065.0004/input/input10 [ 28.103080] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 28.231771] localhost kernel: logitech-hidpp-device 0003:046D:0065.0004: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:0065] on usb-0000:01:00.0-1.4/input1:3 [ 28.232539] localhost kernel: input: Logitech Wireless Mouse PID:003f as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C517.0002/0003:046D:003F.0003/input/input11 [ 28.257355] localhost kernel: logitech-hidpp-device 0003:046D:0065.0004: HID++ 1.0 device connected. [ 28.280424] localhost kernel: logitech-hidpp-device 0003:046D:003F.0003: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:003f] on usb-0000:01:00.0-1.4/input1:1 [ 28.329326] localhost kernel: logitech-hidpp-device 0003:046D:003F.0003: HID++ 1.0 device connected. [ 29.135551] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 30.167365] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 31.199833] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 32.231592] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 33.263212] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 34.295516] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 35.327243] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 36.360503] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 37.392201] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 38.424772] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 39.456518] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 40.488302] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 41.521017] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 42.552710] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 43.584519] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 44.616271] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 45.648028] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 46.679803] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 47.711490] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 48.744196] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 49.775861] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 50.807554] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 51.839596] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 52.872543] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 53.905801] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 54.937575] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 55.969775] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 57.001427] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 58.033368] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 59.065198] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 60.097433] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 61.130354] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 62.162251] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 63.194000] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 64.225842] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 65.257436] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 66.290140] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 67.324965] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 68.357472] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 69.389056] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 70.420604] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 71.452468] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 72.484313] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 73.516872] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 74.551257] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 75.584480] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 76.615945] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 77.647700] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 78.681070] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 79.712794] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 80.744430] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 81.776099] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 82.807858] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 83.840693] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 84.872418] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 85.904238] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 86.936108] localhost immucore[625]:  ERR error="no such device" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 86.990386] localhost immucore[625]:  ERR Mount timeout error="timeout exhausted" options=["ro"] type= what=/dev/disk/by-label where=/sysroot/run/initramfs/cos-state [ 86.990386] localhost immucore[625]:  INF 1. [ 86.990386] localhost immucore[625]: (background: false) (weak: false) (run: false) [ 86.990386] localhost immucore[625]: 2. [ 86.990386] localhost immucore[625]: (background: false) (weak: false) (run: true) [ 86.990386] localhost immucore[625]: (background: false) (weak: false) (run: true) [ 86.990386] localhost immucore[625]: (error: 1 error occurred: [ 86.990386] localhost immucore[625]: * timeout exhausted [ 86.990386] localhost immucore[625]: ) (background: false) (weak: false) (run: true) [ 86.990386] localhost immucore[625]: 3. [ 86.990386] localhost immucore[625]: (error: 'discover-state' deps mount-state failed) (background: false) (weak: false) (run: false) [ 86.990386] localhost immucore[625]: 4. [ 86.990386] localhost immucore[625]: (error: 'mount-root' deps discover-state failed) (background: false) (weak: false) (run: false) [ 86.990386] localhost immucore[625]: 5. [ 86.990386] localhost immucore[625]: (error: 'mount-oem' deps mount-root failed) (background: false) (weak: false) (run: false) [ 86.990386] localhost immucore[625]: 6. [ 86.990386] localhost immucore[625]: (error: 'rootfs-hook' deps mount-state failed) (background: false) (weak: false) (run: false) [ 86.990386] localhost immucore[625]: 7. [ 86.990386] localhost immucore[625]: (error: 'load-config' deps mount-root failed) (background: false) (weak: false) (run: false) [ 86.990386] localhost immucore[625]: 8. [ 86.990386] localhost immucore[625]: (error: 'mount-base-overlay' deps mount-oem failed) (background: false) (weak: false) (run: false) [ 86.990386] localhost immucore[625]: (error: 'custom-mount' deps discover-state failed) (background: false) (weak: false) (run: false) [ 86.990386] localhost immucore[625]: 9. [ 86.990386] localhost immucore[625]: (error: 'overlay-mount' deps discover-state failed) (background: false) (weak: false) (run: false) [ 86.990386] localhost immucore[625]: 10. [ 86.990386] localhost immucore[625]: (error: 'mount-bind' deps load-config failed) (background: false) (weak: false) (run: false) [ 86.990386] localhost immucore[625]: 11. [ 86.990386] localhost immucore[625]: (error: 'write-fstab' deps load-config failed) (background: false) (weak: false) (run: false) [ 86.990386] localhost immucore[625]: 12. [ 86.990386] localhost immucore[625]: (error: 'initramfs-hook' deps discover-state failed) (background: false) (weak: false) (run: false) [ 88.110322] localhost systemd[1]: Finished immucore. [ 185.357257] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 185.390662] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 185.390662] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 185.390662] localhost dracut-initqueue[600]: fi" [ 185.390662] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 186.097440] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 186.140369] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 186.140369] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 186.140369] localhost dracut-initqueue[600]: fi" [ 186.140369] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 186.757384] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 186.800448] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 186.800448] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 186.800448] localhost dracut-initqueue[600]: fi" [ 186.800448] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 187.417502] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 187.450487] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 187.450487] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 187.450487] localhost dracut-initqueue[600]: fi" [ 187.450487] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 188.087774] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 188.130408] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 188.130408] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 188.130408] localhost dracut-initqueue[600]: fi" [ 188.130408] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 188.747181] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 188.780488] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 188.780488] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 188.780488] localhost dracut-initqueue[600]: fi" [ 188.780488] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 189.417559] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 189.450478] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 189.450478] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 189.450478] localhost dracut-initqueue[600]: fi" [ 189.450478] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 190.097228] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 190.130511] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 190.130511] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 190.130511] localhost dracut-initqueue[600]: fi" [ 190.130511] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 190.767173] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 190.800542] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 190.800542] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 190.800542] localhost dracut-initqueue[600]: fi" [ 190.800542] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 191.447259] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 191.480521] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 191.480521] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 191.480521] localhost dracut-initqueue[600]: fi" [ 191.480521] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 192.107303] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 192.140470] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 192.140470] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 192.140470] localhost dracut-initqueue[600]: fi" [ 192.140470] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 192.797193] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 192.840414] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 192.840414] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 192.840414] localhost dracut-initqueue[600]: fi" [ 192.840414] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 193.467345] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 193.510383] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 193.510383] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 193.510383] localhost dracut-initqueue[600]: fi" [ 193.510383] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 194.147486] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 194.180524] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 194.180524] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 194.180524] localhost dracut-initqueue[600]: fi" [ 194.180524] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 194.827622] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 194.860489] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 194.860489] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 194.860489] localhost dracut-initqueue[600]: fi" [ 194.860489] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 195.497345] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 195.540354] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 195.540354] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 195.540354] localhost dracut-initqueue[600]: fi" [ 195.540354] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 196.157306] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 196.200431] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 196.200431] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 196.200431] localhost dracut-initqueue[600]: fi" [ 196.200431] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 196.817374] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 196.850411] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 196.850411] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 196.850411] localhost dracut-initqueue[600]: fi" [ 196.850411] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 197.487225] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 197.520553] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 197.520553] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 197.520553] localhost dracut-initqueue[600]: fi" [ 197.520553] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 198.177217] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 198.220340] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 198.220340] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 198.220340] localhost dracut-initqueue[600]: fi" [ 198.220340] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 198.847412] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 198.880512] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 198.880512] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 198.880512] localhost dracut-initqueue[600]: fi" [ 198.880512] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 199.537203] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 199.580338] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 199.580338] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 199.580338] localhost dracut-initqueue[600]: fi" [ 199.580338] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 200.217229] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 200.250595] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 200.250595] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 200.250595] localhost dracut-initqueue[600]: fi" [ 200.250595] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 200.887203] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 200.930432] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 200.930432] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 200.930432] localhost dracut-initqueue[600]: fi" [ 200.930432] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 201.567321] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 201.600617] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 201.600617] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 201.600617] localhost dracut-initqueue[600]: fi" [ 201.600617] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 202.227310] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 202.260498] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 202.260498] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 202.260498] localhost dracut-initqueue[600]: fi" [ 202.260498] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 202.897344] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 202.930536] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 202.930536] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 202.930536] localhost dracut-initqueue[600]: fi" [ 202.930536] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 203.587214] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 203.620478] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 203.620478] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 203.620478] localhost dracut-initqueue[600]: fi" [ 203.620478] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 204.257274] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 204.300391] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 204.300391] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 204.300391] localhost dracut-initqueue[600]: fi" [ 204.300391] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 204.937354] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 204.980385] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 204.980385] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 204.980385] localhost dracut-initqueue[600]: fi" [ 204.980385] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 205.617242] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 205.660348] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 205.660348] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 205.660348] localhost dracut-initqueue[600]: fi" [ 205.660348] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 206.287206] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 206.320463] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 206.320463] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 206.320463] localhost dracut-initqueue[600]: fi" [ 206.320463] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 206.947387] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 206.980502] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 206.980502] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 206.980502] localhost dracut-initqueue[600]: fi" [ 206.980502] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 207.667278] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 207.710397] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 207.710397] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 207.710397] localhost dracut-initqueue[600]: fi" [ 207.710397] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 208.337322] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 208.380354] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 208.380354] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 208.380354] localhost dracut-initqueue[600]: fi" [ 208.380354] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 209.017262] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 209.050526] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 209.050526] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 209.050526] localhost dracut-initqueue[600]: fi" [ 209.050526] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 209.687715] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 209.730430] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 209.730430] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 209.730430] localhost dracut-initqueue[600]: fi" [ 209.730430] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 210.347491] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 210.380517] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 210.380517] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 210.380517] localhost dracut-initqueue[600]: fi" [ 210.380517] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 211.037132] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 211.080383] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 211.080383] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 211.080383] localhost dracut-initqueue[600]: fi" [ 211.080383] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 211.717227] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 211.760376] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 211.760376] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 211.760376] localhost dracut-initqueue[600]: fi" [ 211.760376] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 212.387231] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 212.420462] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 212.420462] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 212.420462] localhost dracut-initqueue[600]: fi" [ 212.420462] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 213.077194] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 213.120334] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 213.120334] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 213.120334] localhost dracut-initqueue[600]: fi" [ 213.120334] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 213.747157] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 213.780562] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 213.780562] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 213.780562] localhost dracut-initqueue[600]: fi" [ 213.780562] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 214.417255] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 214.460370] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 214.460370] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 214.460370] localhost dracut-initqueue[600]: fi" [ 214.460370] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 215.087267] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 215.120492] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 215.120492] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 215.120492] localhost dracut-initqueue[600]: fi" [ 215.120492] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 215.757312] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 215.790734] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 215.790734] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 215.790734] localhost dracut-initqueue[600]: fi" [ 215.790734] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 216.427185] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 216.460599] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 216.460599] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 216.460599] localhost dracut-initqueue[600]: fi" [ 216.460599] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 217.117271] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 217.160432] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 217.160432] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 217.160432] localhost dracut-initqueue[600]: fi" [ 217.160432] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 217.778066] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 217.810464] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 217.810464] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 217.810464] localhost dracut-initqueue[600]: fi" [ 217.810464] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 218.457368] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 218.500428] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 218.500428] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 218.500428] localhost dracut-initqueue[600]: fi" [ 218.500428] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 219.127264] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 219.160558] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 219.160558] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 219.160558] localhost dracut-initqueue[600]: fi" [ 219.160558] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 219.797493] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 219.840347] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 219.840347] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 219.840347] localhost dracut-initqueue[600]: fi" [ 219.840347] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 220.477324] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 220.520349] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 220.520349] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 220.520349] localhost dracut-initqueue[600]: fi" [ 220.520349] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 221.147192] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 221.180527] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 221.180527] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 221.180527] localhost dracut-initqueue[600]: fi" [ 221.180527] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 221.817432] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 221.850499] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 221.850499] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 221.850499] localhost dracut-initqueue[600]: fi" [ 221.850499] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 222.487226] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 222.530386] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 222.530386] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 222.530386] localhost dracut-initqueue[600]: fi" [ 222.530386] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 223.157358] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 223.200394] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 223.200394] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 223.200394] localhost dracut-initqueue[600]: fi" [ 223.200394] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 223.838306] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 223.880444] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 223.880444] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 223.880444] localhost dracut-initqueue[600]: fi" [ 223.880444] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 224.507354] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 224.540448] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 224.540448] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 224.540448] localhost dracut-initqueue[600]: fi" [ 224.540448] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 225.187212] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 225.230389] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 225.230389] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 225.230389] localhost dracut-initqueue[600]: fi" [ 225.230389] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 225.867210] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 225.900540] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 225.900540] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 225.900540] localhost dracut-initqueue[600]: fi" [ 225.900540] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 226.567245] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 226.600532] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 226.600532] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 226.600532] localhost dracut-initqueue[600]: fi" [ 226.600532] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 227.237371] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 227.280413] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 227.280413] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 227.280413] localhost dracut-initqueue[600]: fi" [ 227.280413] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 227.907429] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 227.950456] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 227.950456] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 227.950456] localhost dracut-initqueue[600]: fi" [ 227.950456] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 228.577994] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 228.610494] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 228.610494] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 228.610494] localhost dracut-initqueue[600]: fi" [ 228.610494] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 229.237297] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 229.280387] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 229.280387] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 229.280387] localhost dracut-initqueue[600]: fi" [ 229.280387] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 229.957223] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 230.000350] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 230.000350] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 230.000350] localhost dracut-initqueue[600]: fi" [ 230.000350] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 230.627456] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 230.660523] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 230.660523] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 230.660523] localhost dracut-initqueue[600]: fi" [ 230.660523] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 231.307254] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 231.340576] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 231.340576] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 231.340576] localhost dracut-initqueue[600]: fi" [ 231.340576] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 231.977270] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 232.020384] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 232.020384] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 232.020384] localhost dracut-initqueue[600]: fi" [ 232.020384] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 232.637245] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 232.670514] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 232.670514] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 232.670514] localhost dracut-initqueue[600]: fi" [ 232.670514] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 233.297251] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 233.340362] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 233.340362] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 233.340362] localhost dracut-initqueue[600]: fi" [ 233.340362] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 233.977452] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 234.010513] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 234.010513] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 234.010513] localhost dracut-initqueue[600]: fi" [ 234.010513] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 234.647278] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 234.690409] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 234.690409] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 234.690409] localhost dracut-initqueue[600]: fi" [ 234.690409] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 235.317324] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 235.350441] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 235.350441] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 235.350441] localhost dracut-initqueue[600]: fi" [ 235.350441] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 235.987185] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 236.020524] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 236.020524] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 236.020524] localhost dracut-initqueue[600]: fi" [ 236.020524] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 236.677225] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 236.710570] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 236.710570] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 236.710570] localhost dracut-initqueue[600]: fi" [ 236.710570] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 237.347263] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 237.390369] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 237.390369] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 237.390369] localhost dracut-initqueue[600]: fi" [ 237.390369] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 238.027373] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 238.070414] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 238.070414] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 238.070414] localhost dracut-initqueue[600]: fi" [ 238.070414] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 238.697342] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 238.740434] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 238.740434] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 238.740434] localhost dracut-initqueue[600]: fi" [ 238.740434] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 239.377357] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 239.420436] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 239.420436] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 239.420436] localhost dracut-initqueue[600]: fi" [ 239.420436] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 240.037392] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 240.080452] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 240.080452] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 240.080452] localhost dracut-initqueue[600]: fi" [ 240.080452] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 240.697332] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 240.740448] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 240.740448] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 240.740448] localhost dracut-initqueue[600]: fi" [ 240.740448] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 241.377438] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 241.420407] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 241.420407] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 241.420407] localhost dracut-initqueue[600]: fi" [ 241.420407] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 242.037461] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 242.080486] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 242.080486] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 242.080486] localhost dracut-initqueue[600]: fi" [ 242.080486] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 242.697381] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 242.730524] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 242.730524] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 242.730524] localhost dracut-initqueue[600]: fi" [ 242.730524] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 243.367298] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 243.410435] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 243.410435] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 243.410435] localhost dracut-initqueue[600]: fi" [ 243.410435] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 244.047336] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 244.090354] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 244.090354] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 244.090354] localhost dracut-initqueue[600]: fi" [ 244.090354] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 244.727212] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 244.760564] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 244.760564] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 244.760564] localhost dracut-initqueue[600]: fi" [ 244.760564] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 245.397370] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 245.430563] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 245.430563] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 245.430563] localhost dracut-initqueue[600]: fi" [ 245.430563] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 246.087309] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 246.120572] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 246.120572] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 246.120572] localhost dracut-initqueue[600]: fi" [ 246.120572] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 246.767232] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 246.800568] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 246.800568] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 246.800568] localhost dracut-initqueue[600]: fi" [ 246.800568] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 247.437191] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 247.470488] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 247.470488] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 247.470488] localhost dracut-initqueue[600]: fi" [ 247.470488] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 248.107202] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 248.140481] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 248.140481] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 248.140481] localhost dracut-initqueue[600]: fi" [ 248.140481] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 248.777227] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 248.810538] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 248.810538] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 248.810538] localhost dracut-initqueue[600]: fi" [ 248.810538] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 249.457140] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 249.500349] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 249.500349] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 249.500349] localhost dracut-initqueue[600]: fi" [ 249.500349] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 250.137554] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 250.170539] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 250.170539] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 250.170539] localhost dracut-initqueue[600]: fi" [ 250.170539] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 250.807486] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 250.840406] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 250.840406] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 250.840406] localhost dracut-initqueue[600]: fi" [ 250.840406] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 251.487351] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 251.530404] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 251.530404] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 251.530404] localhost dracut-initqueue[600]: fi" [ 251.530404] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 252.167203] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 252.200560] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 252.200560] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 252.200560] localhost dracut-initqueue[600]: fi" [ 252.200560] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 252.857263] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 252.890566] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 252.890566] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 252.890566] localhost dracut-initqueue[600]: fi" [ 252.890566] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 253.547345] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 253.580554] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 253.580554] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 253.580554] localhost dracut-initqueue[600]: fi" [ 253.580554] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 254.227210] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 254.260602] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 254.260602] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 254.260602] localhost dracut-initqueue[600]: fi" [ 254.260602] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 254.897470] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 254.940449] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 254.940449] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 254.940449] localhost dracut-initqueue[600]: fi" [ 254.940449] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 255.577288] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 255.620463] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 255.620463] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 255.620463] localhost dracut-initqueue[600]: fi" [ 255.620463] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 256.267241] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 256.310434] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 256.310434] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 256.310434] localhost dracut-initqueue[600]: fi" [ 256.310434] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 256.927343] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 256.970449] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 256.970449] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 256.970449] localhost dracut-initqueue[600]: fi" [ 256.970449] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 257.597340] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 257.630506] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 257.630506] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 257.630506] localhost dracut-initqueue[600]: fi" [ 257.630506] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 258.267447] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 258.300586] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 258.300586] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 258.300586] localhost dracut-initqueue[600]: fi" [ 258.300586] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 258.937286] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 258.980428] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 258.980428] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 258.980428] localhost dracut-initqueue[600]: fi" [ 258.980428] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 259.607314] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 259.640500] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 259.640500] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 259.640500] localhost dracut-initqueue[600]: fi" [ 259.640500] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 260.277373] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 260.320375] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 260.320375] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 260.320375] localhost dracut-initqueue[600]: fi" [ 260.320375] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 260.957224] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 261.000373] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 261.000373] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 261.000373] localhost dracut-initqueue[600]: fi" [ 261.000373] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 261.617260] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 261.650425] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 261.650425] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 261.650425] localhost dracut-initqueue[600]: fi" [ 261.650425] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 262.297338] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 262.340404] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 262.340404] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 262.340404] localhost dracut-initqueue[600]: fi" [ 262.340404] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 262.967295] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 263.000522] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 263.000522] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 263.000522] localhost dracut-initqueue[600]: fi" [ 263.000522] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 263.657179] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 263.700422] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 263.700422] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 263.700422] localhost dracut-initqueue[600]: fi" [ 263.700422] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 264.317407] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 264.360422] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 264.360422] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 264.360422] localhost dracut-initqueue[600]: fi" [ 264.360422] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 264.997425] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 265.030574] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 265.030574] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 265.030574] localhost dracut-initqueue[600]: fi" [ 265.030574] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 265.667134] localhost dracut-initqueue[600]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 265.700450] localhost dracut-initqueue[600]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-label\x2fCOS_ACTIVE.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 265.700450] localhost dracut-initqueue[600]: [ -e "/dev/disk/by-label/COS_ACTIVE" ] [ 265.700450] localhost dracut-initqueue[600]: fi" [ 265.700450] localhost dracut-initqueue[600]: Warning: dracut-initqueue: starting timeout scripts [ 265.700450] localhost dracut-initqueue[600]: Warning: Could not boot. [ 265.761730] localhost systemd[1]: Starting Dracut Emergency Shell...