From 2ffa139d4fbc0d0b18a74b670f2be228f2d7403f Mon Sep 17 00:00:00 2001 From: arhabd Date: Sun, 14 Jul 2024 12:48:45 +0000 Subject: [PATCH] Update kgpe-d16.md Add short instructions --- .../Flashing-Guides/kgpe-d16.md | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/Installing-and-Configuring/Flashing-Guides/kgpe-d16.md b/Installing-and-Configuring/Flashing-Guides/kgpe-d16.md index a7cfc90..0bada84 100644 --- a/Installing-and-Configuring/Flashing-Guides/kgpe-d16.md +++ b/Installing-and-Configuring/Flashing-Guides/kgpe-d16.md @@ -10,4 +10,16 @@ grand_parent: Installing and configuring Asus KGPE-D16 ==== -TO BE WRITTEN +Prerequisits: +1. Make sure you have compatiable RAM and CPU combination, see HCL https://github.com/linuxboot/heads/issues/1395 if you have a combination RAM and CPU that is not listed on the HCL please report back your results so we can improve the hardware compatability. +2. A 16MB flash chip, the stock 2MB flash chip is not big enough to store heads +3. A flasher see https://github.com/linuxboot/heads-wiki/issues/120#issuecomment-2194771490 + +Instructions: +Flash the 16MB chip with the flasher and place the newly flashed chip in the board +ch341a example +1. place chip in flasher and pull down the locking mechanism +2. plug flasher into a computer with the flashrom software installed +3. flash chip using "sudo flashrom --programmer ch341a_spi -w heads.rom" +4. remove flasher from usb +5. release the locking mechanism and place the flashchip on the board