Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Project: Add 8821/11au rtw88 in-kernel driver. Need testers... #133

Open
morrownr opened this issue Apr 30, 2024 · 251 comments
Open

Project: Add 8821/11au rtw88 in-kernel driver. Need testers... #133

morrownr opened this issue Apr 30, 2024 · 251 comments

Comments

@morrownr
Copy link
Owner

morrownr commented Apr 30, 2024

Greetings to anyone that reads this message.

This Issue is where we coordinated the new 8821au in-kernel driver.

The driver is available for testing at the following repo:

https://github.com/lwfinger/rtw88

Once you are at the rtw88 repo, please post bug reports at that repo.

The new driver went into Linux kernel 6.13. Some enhancements will go into kernel 6.14.

Remember, before installing the rtw88 driver, first remove the out-of-kernel driver in this repo or whatever repo you may have installed. You can run the following to remove it if using this repo:

$ sudo sh remove-driver.sh

It is important to follow the instructions in the README at the repo with the new test driver. You may not be familiar with rtw88 in the kernel but even if you are, there are some necessary mods that you need to know about. The rtw88 that has this new driver is more advanced than the rtw88 in stable kernels as it follows wireless-next and is used to work on and develop new drivers.

We welcome you to test and report on this new driver. Your testing will help us get this new driver in the Linux kernel sooner and in better shape. We do have specific needs. The most immediate need is to find users that have adapters that have bluetooth support (rtl8821au chip). The current developers only have adapters that have rtl8811au chips so we need help. We also need testers with old laptps that have the rtl8821ae chip.

If you are aware of anyone who is familiar with mac80211 drivers, please invite them as more eyes on the code is a good thing. Your ideas are most welcome. We can do this.

@morrownr

Status report:

  • The driver went into Linux kernel 6.13 during the week of 11-21-2024.
@lwfinger
Copy link

lwfinger commented May 5, 2024

I get a maximum of 130 Mbps transmit and 93 RX with iperf3. LibreSpeed gets 119 down and 113 up.

@lwfinger
Copy link

lwfinger commented May 6, 2024

The master branch now contains all of dubhater's changes for the RTW8821AU and RTW8812AU, and the driver works. I have not removed any of the other branches until the code is checked a bit more, but please test everything. The speeds are still on the low side, but that will come.

@morrownr
Copy link
Owner Author

morrownr commented May 6, 2024

@lwfinger

The master branch now contains all of dubhater's changes for the RTW8821AU and RTW8812AU, and the driver works.

Thanks. I'll start testing and adding additional vid/pids for rtw8812au.

@dubhater

As you ready for rtw8812au to be tested or just rtw8821au?

@morrownr
Copy link
Owner Author

morrownr commented May 6, 2024

Initital testing of rtw88 master:

$ iperf3 -c 192.168.1.1
Connecting to host 192.168.1.1, port 5201
[  5] local 192.168.1.172 port 57430 connected to 192.168.1.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  28.6 MBytes   240 Mbits/sec    0    526 KBytes       
[  5]   1.00-2.00   sec  25.4 MBytes   213 Mbits/sec    0    526 KBytes       
[  5]   2.00-3.00   sec  25.5 MBytes   214 Mbits/sec    0    526 KBytes       
[  5]   3.00-4.00   sec  25.5 MBytes   214 Mbits/sec    0    551 KBytes       
[  5]   4.00-5.00   sec  25.7 MBytes   216 Mbits/sec    0    551 KBytes       
[  5]   5.00-6.00   sec  25.7 MBytes   216 Mbits/sec    0    551 KBytes       
[  5]   6.00-7.00   sec  26.5 MBytes   222 Mbits/sec    0    577 KBytes       
[  5]   7.00-8.00   sec  24.2 MBytes   203 Mbits/sec    0    577 KBytes       
[  5]   8.00-9.00   sec  25.5 MBytes   214 Mbits/sec    0    577 KBytes       
[  5]   9.00-10.00  sec  25.6 MBytes   215 Mbits/sec    0    577 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec   258 MBytes   217 Mbits/sec    0             sender
[  5]   0.00-10.01  sec   256 MBytes   214 Mbits/sec                  receiver

iperf Done.

I ran iperf3 several times with my primary testing setup. Speed looks really good. Around 220 Mbps is about as fast as this chip can go if the out-of-kernel results over the last few years are good. The test above is on a DFS channel where there is no congestion. dmesg is clean. I'm impressed so far.

Monitor mode frame injection test:

$ sudo aireplay-ng --test wlx00c0caac47c7
[sudo] password for morrow:         
13:40:39  Trying broadcast probe requests...
13:40:39  Injection is working!
13:40:41  Found 12 APs

13:40:41  Trying directed probe requests...
13:40:41  C6:BE:59:93:4F:3B - channel: 44 - ''
13:40:43  Ping (min/avg/max): 2.473ms/9.155ms/17.771ms Power: -81.38
13:40:43  21/30:  70%

13:40:43  10:33:BF:60:FA:3B - channel: 44 - 'CoxWiFi'
13:40:43  Ping (min/avg/max): 1.548ms/5.636ms/8.924ms Power: -39.00
13:40:43  29/30:  96%

13:40:43  08:A7:C0:14:81:DA - channel: 44 - 'Wade Wifi'
13:40:47  Ping (min/avg/max): 10.801ms/17.700ms/27.914ms Power: -76.69
13:40:47  13/30:  43%

13:40:47  08:A7:C0:14:81:DF - channel: 44 - ''
13:40:51  Ping (min/avg/max): 14.111ms/22.023ms/39.249ms Power: -76.83
13:40:51  12/30:  40%

13:40:51  CC:BE:59:93:4F:3B - channel: 44 - 'SKHutch5'
13:40:52  Ping (min/avg/max): 2.017ms/6.207ms/20.025ms Power: -80.83
13:40:52  24/30:  80%

13:40:52  08:A7:C0:14:81:DD - channel: 44 - ''
13:40:57  Ping (min/avg/max): 10.314ms/21.516ms/31.877ms Power: -77.00
13:40:57  10/30:  33%

13:40:57  C2:BE:59:93:4F:3B - channel: 44 - ''
13:40:59  Ping (min/avg/max): 7.544ms/18.691ms/34.159ms Power: -79.70
13:40:59  20/30:  66%

13:40:59  10:33:BF:60:FA:3A - channel: 44 - ''
13:41:00  Ping (min/avg/max): 3.128ms/9.390ms/16.078ms Power: -38.93
13:41:00  28/30:  93%

13:41:00  10:33:BF:60:FA:3E - channel: 44 - ''
13:41:00  Ping (min/avg/max): 1.213ms/8.218ms/20.971ms Power: -38.80
13:41:00  30/30: 100%

13:41:00  08:A7:C0:14:81:DC - channel: 44 - 'CoxWiFi'
13:41:04  Ping (min/avg/max): 6.712ms/18.391ms/26.479ms Power: -77.00
13:41:04   9/30:  30%

13:41:04  08:A7:C0:14:81:DB - channel: 44 - ''
13:41:09  Ping (min/avg/max): 12.830ms/20.560ms/26.364ms Power: -77.00
13:41:09   9/30:  30%

13:41:09  10:33:BF:60:FA:3C - channel: 44 - ''
13:41:09  Ping (min/avg/max): 2.109ms/8.086ms/23.178ms Power: -38.93
13:41:09  28/30:  93%

Going in and out of monitor mode works well and things look like they should. The injection test above showed very good results. So far monitor mode looks good.

I will do more detailed test on managed and monitor mode as able this week and I plan to test AP mode and
P2P-client. So far, this driver looks good.

I plan to rework the first message in this thread to provide instructions to those who can test/report as most will not be used to the instructions for getting this driver going,

I am still looking for someone with a rtl8821au based adapter and someone with an old laptop with a rtl8821ce chip in it so we can test bluetooth.

@morrownr

Repository owner deleted a comment from dubhater May 6, 2024
Repository owner deleted a comment from dubhater May 6, 2024
Repository owner deleted a comment from dubhater May 6, 2024
Repository owner deleted a comment from lwfinger May 6, 2024
Repository owner deleted a comment from dubhater May 6, 2024
Repository owner deleted a comment from lwfinger May 6, 2024
Repository owner deleted a comment from dubhater May 6, 2024
Repository owner deleted a comment from lwfinger May 6, 2024
Repository owner deleted a comment from lwfinger May 6, 2024
@dubhater
Copy link

dubhater commented May 6, 2024

@morrownr rtw_8812au is not ready yet.

I can see some RTL8821AE on Aliexpress, both M.2 and mini PCIe.

Repository owner deleted a comment from dubhater May 6, 2024
@morrownr
Copy link
Owner Author

morrownr commented May 6, 2024

@dubhater

I can see some RTL8821AE on Aliexpress, both M.2 and mini PCIe.

Give me a chance to round up some testers that already have the chips. We can always go get one if we have to do so. This repo gets over 100 hits per day so there are a lot of users of this chip. I just need to work on getting them in here now that we have something for them to test. I'll work it.

I'm impressed with this driver so far. We'll find problems but so far it is working well. My opinion after a few years of supporting out-of-kernel drivers for both the rtl8821au and rtl8821cu is that the au is simply a more reliable chip that causes users far fewer problems.

@morrownr

@gmsanchez
Copy link

@morrownr

I have a TP-Link Archer T2U PLUS [RTL8821AU]. I removed this kernel module using $ sudo sh remove-driver.sh and installed rtw88 using the provided readme on Kubuntu 24.04

So far everything is working good. I am willing to help, but I don't have a lot of experience in this field. Are there any instructions to run the required tests? Just let me know.

@morrownr
Copy link
Owner Author

morrownr commented May 8, 2024

Hi @gmsanchez

Thanks for testing.

Are there any instructions to run the required tests?

Do you have any experience using any modes in addition to managed (client) mode?

Please document your distro and version here and post the results of the following:

$ uname -r
$ gcc --version

Do you know of a way to test your speed? If so, do it.

Post the results of:

$ sudo dmesg | grep rtw

Since you have an adapter with the version of the chip that has bluetooth support, can you verify that bluetooth is working correctly?

Post the results of:

$ lsusb

If your adapter has an LED, does it blink?

Lastly, just use it. See if anything goes wrong over the next few days. Keep us posted.

You may also get questions from @dubhater and @lwfinger .

@morrownr

@gmsanchez
Copy link

gmsanchez commented May 8, 2024

Do you know of a way to test your speed? If so, do it.

I don't know how to test my speed.

Since you have an adapter with the version of the chip that has bluetooth support, can you verify that bluetooth is working correctly?

I don't have any bluetooth device on my system.

If your adapter has an LED, does it blink?

I'll move the adapter to the front and check the LED status.

In the meantime, the requested output of the commands is below:

$ uname -r
6.8.0-31-generic
$ gcc --version
gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0
Copyright (C) 2023 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ sudo dmesg | grep rtw
[    3.848959] rtw_core: loading out-of-tree module taints kernel.
[    3.848966] rtw_core: module verification failed: signature and/or required key missing - tainting kernel
[    3.874055] rtw_8821au 3-1:1.0: Firmware version 42.4.0, H2C version 0
[    3.915832] usbcore: registered new interface driver rtw_8821au
[    3.919055] rtw_8821au 3-1:1.0 wlx6c5ab0d0395d: renamed from wlan0
[    6.110598] rtw_8821au 3-1:1.0: MAC has not been powered on yet
$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 002 Device 004: ID 046d:c077 Logitech, Inc. Mouse
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 2357:0120 TP-Link Archer T2U PLUS [RTL8821AU]
Bus 003 Device 003: ID 046d:08e4 Logitech, Inc. C505e HD Webcam
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

@morrownr
Copy link
Owner Author

morrownr commented May 8, 2024

@dubhater

rtw88 master - rtw_8821au

I am seeing the below during compilation. This is with Debian 12 and kernels 6.1 LTS and 6.6 LTS plus gcc 12.2. This not fatal but...

  CC [M]  /home/morrow/src/rtw88/rtw8821a.o
  CC [M]  /home/morrow/src/rtw88/rtw8821a_table.o
In file included from /usr/src/linux-headers-6.1.0-21-common/include/linux/kernel.h:26,
                 from /usr/src/linux-headers-6.1.0-21-common/arch/x86/include/asm/percpu.h:27,
                 from /usr/src/linux-headers-6.1.0-21-common/arch/x86/include/asm/current.h:6,
                 from /usr/src/linux-headers-6.1.0-21-common/include/linux/sched.h:12,
                 from /usr/src/linux-headers-6.1.0-21-common/include/linux/delay.h:23,
                 from /usr/src/linux-headers-6.1.0-21-common/include/linux/usb.h:15,
                 from /home/morrow/src/rtw88/rtw8821a.c:5:
/home/morrow/src/rtw88/rtw8821a.c: In function ‘rtw8821a_tx_power_training’:
/usr/src/linux-headers-6.1.0-21-common/include/linux/minmax.h:20:35: warning: comparison of distinct pointer types lacks a cast
   20 |         (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
      |                                   ^~
/usr/src/linux-headers-6.1.0-21-common/include/linux/minmax.h:26:18: note: in expansion of macro ‘__typecheck’
   26 |                 (__typecheck(x, y) && __no_side_effects(x, y))
      |                  ^~~~~~~~~~~
/usr/src/linux-headers-6.1.0-21-common/include/linux/minmax.h:36:31: note: in expansion of macro ‘__safe_cmp’
   36 |         __builtin_choose_expr(__safe_cmp(x, y), \
      |                               ^~~~~~~~~~
/usr/src/linux-headers-6.1.0-21-common/include/linux/minmax.h:52:25: note: in expansion of macro ‘__careful_cmp’
   52 | #define max(x, y)       __careful_cmp(x, y, >)
      |                         ^~~~~~~~~~~~~
/home/morrow/src/rtw88/rtw8821a.c:2481:31: note: in expansion of macro ‘max’
 2481 |                 write_data |= max(power_level, 2) << (i * 8);
      |                               ^~~

@lwfinger
Copy link

lwfinger commented May 8, 2024

The problem is that the code used max(a,b), whereas it should have been max_t(u32,a,b). It now compiles cleanly on openSUSE Tumbleweed and Debian 12.

@morrownr
Copy link
Owner Author

morrownr commented May 9, 2024

@gmsanchez

I don't know how to test my speed.

You can give the following site a try for basic speed testing:

https://testmy.net/

Most of us use iperf3 on our local lans for speed testing. Do you have a RasPi on your local lan or a wifi router that runs OpenWRT?

I don't have any bluetooth device on my system.

It looked like you might have a version of the chipset that includes bluetooth support so I was looking to see if the bluetooth in your adapter was working. Maybe you have a chip that is wifi only.

[ 6.110598] rtw_8821au 3-1:1.0: MAC has not been powered on yet

Let me think out loud here for a moment. I am trying to sort out why the above line is needed. What is it doing for us?

Thanks for the info and we'll be waiting for additional reports.

@morrownr

@morrownr
Copy link
Owner Author

morrownr commented May 9, 2024

@lwfinger

The problem is that the code used max(a,b), whereas it should have been max_t(u32,a,b). It now compiles cleanly on openSUSE Tumbleweed and Debian 12.

Awesome! Clean compile here.

FYI: I'll be moving to AP mode testing soon. So far, managed and monitor modes look really good but my AP mode testing will take me to another distro and ARM64.

@morrownr
Copy link
Owner Author

morrownr commented May 9, 2024

@dubhater @lwfinger

Here is a very minor nitpick:

Screenshot from 2024-05-09 14-58-12

When I run iperf3, I am seeing drop (in the statistics box) increase regularly. With other wireless devices I am more used to it not increasing or occasionally incrementing but not as regularly as I am seeing here. Do we have a buffer set slightly smaller than it needs to be?

Like I said, nitpick. I am having a difficult time finding any problems with managed and monitor modes.

I am off to test AP mode.

@morrownr

@lwfinger
Copy link

Do you see any WARNINGS in your logs like this "WARNING: CPU: 3 PID: 36 at net/mac80211/rx.c"? Your CPU and PID will be different. That may be the source of your drops.

I have a patch to silence the WARNINGS, but the drops are not fixed as the packets are malformed.

What is the utility that produced the screenshot? I am not familiar with anything like it.

@5kft
Copy link
Contributor

5kft commented May 10, 2024

@morrownr I'm using a Debian-based custom arm64/armhf distribution, and as such I can't build the rtw88 driver via @lwfinger's process (I didn't bother to try to address this further). Instead, I simply removed the original mainline (6.9-rc7) rtw88 driver source and replaced it completely with @lwfinger's version from his github.

Now, when building this new version of rtw88 I am getting errors relating to the PCI driver module support or something (see errors below). My kernel configuration does not enable CONFIG_PCI, just in case this might be related. I haven't debugged the new in-kernel rtw88 build process any further. I'm pointing this out just in case there is an oversight in this new rtw88 code for non-CONFIG_PCI and/or ARM builds (or something).

As a comparison, the mainline 6.9-rc7 rtw88 driver builds completely fine - without any errors - so there does appear to be a regression in this new version of the driver source.

In my kernel config I am only enabling the the 8821CU module, so it is kind of odd that the build is erroring out for driver sources that aren't even enabled:

CONFIG_RTW88=m
CONFIG_RTW88_CORE=m
CONFIG_RTW88_USB=m
CONFIG_RTW88_8821C=m
# CONFIG_RTW88_8822BS is not set
# CONFIG_RTW88_8822BU is not set
# CONFIG_RTW88_8822CS is not set
# CONFIG_RTW88_8822CU is not set
# CONFIG_RTW88_8723DS is not set
# CONFIG_RTW88_8723DU is not set
# CONFIG_RTW88_8821CS is not set
CONFIG_RTW88_8821CU=m
# CONFIG_RTW88_DEBUG is not set
# CONFIG_RTW88_DEBUGFS is not set

Build errors:

drivers/net/wireless/realtek/rtw88/rtw8822be.c:27:1: warning: data definition has no type or storage class
   27 | module_pci_driver(rtw_8822be_driver);
      | ^~~~~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw88/rtw8822be.c:27:1: error: type defaults to ‘int’ in declaration of ‘module_pci_driver’ [-Werror=implicit-int]
drivers/net/wireless/realtek/rtw88/rtw8822be.c:27:1: warning: parameter names (without types) in function declaration
drivers/net/wireless/realtek/rtw88/rtw8822be.c:19:26: warning: ‘rtw_8822be_driver’ defined but not used [-Wunused-variable]
   19 | static struct pci_driver rtw_8822be_driver = {
      |                          ^~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
make[7]: *** [scripts/Makefile.build:244: drivers/net/wireless/realtek/rtw88/rtw8822be.o] Error 1
make[7]: *** Waiting for unfinished jobs....
drivers/net/wireless/realtek/rtw88/rtw8822ce.c:31:1: warning: data definition has no type or storage class
   31 | module_pci_driver(rtw_8822ce_driver);
      | ^~~~~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw88/rtw8822ce.c:31:1: error: type defaults to ‘int’ in declaration of ‘module_pci_driver’ [-Werror=implicit-int]
drivers/net/wireless/realtek/rtw88/rtw8822ce.c:31:1: warning: parameter names (without types) in function declaration
drivers/net/wireless/realtek/rtw88/rtw8822ce.c:23:26: warning: ‘rtw_8822ce_driver’ defined but not used [-Wunused-variable]
   23 | static struct pci_driver rtw_8822ce_driver = {
      |                          ^~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
make[7]: *** [scripts/Makefile.build:244: drivers/net/wireless/realtek/rtw88/rtw8822ce.o] Error 1
make[6]: *** [scripts/Makefile.build:485: drivers/net/wireless/realtek/rtw88] Error 2
make[5]: *** [scripts/Makefile.build:485: drivers/net/wireless/realtek] Error 2
make[4]: *** [scripts/Makefile.build:485: drivers/net/wireless] Error 2
make[3]: *** [scripts/Makefile.build:485: drivers/net] Error 2
make[2]: *** [scripts/Makefile.build:485: drivers] Error 2

@dubhater
Copy link

It is supported but 6.13 only recognises one USB ID: 2357:011e. Is that your device?

6.14 will recognise more USB IDs.

@morrownr
Copy link
Owner Author

@Darin755

when I use kernel 6.13.0 in the Fedora 41 next copr repo nothing happens.

There is also the issue of whether the firmware is included in fedora yet. You can get the location of the rtw88 firmware at the following location:

https://github.com/morrownr/USB-WiFi/blob/main/home/How_to_Install_Firmware_for_Mediatek_based_USB_WiFi_adapters.md

@Darin755
Copy link

Darin755 commented Dec 29, 2024

My USB wifi adapter has ID 2357:011f

Does anyone know how different it is from 2357:011e? Theoretically I should be able to modify the kernel and recompile to also support 2357:011f?

@dubhater
Copy link

Yes, it should work.

You can also load the module manually and teach it to recognise your device:

modprobe rtw88_8821au
echo "2357 011f" > /sys/bus/usb/drivers/rtw88_8821au/new_id

You have to do this every time you reboot.

@morrownr
Copy link
Owner Author

@Darin755

I just checked and 2357:011f is in queue to be added to kernel 6.14. Your easiest option for now could be to install the repo where the work to upstream is accomplished:

https://github.com/lwfinger/rtw88

We really need testers, especially for AP mode.

@Darin755
Copy link

@morrownr

What do you want tested exactly? I am good running whatever needs to be tested since it is all virtualized anyway.

@Darin755
Copy link

@dubhater

I don't see rtw88_8821au as part of the kernel modules in 6.13 vanilla from the Fedora next repo.

@dubhater
Copy link

Maybe it wasn't enabled. What do you get from zgrep RTW88 /proc/config.gz ?

@morrownr
Copy link
Owner Author

@Darin755

What do you want tested exactly? I am good running whatever needs to be tested since it is all virtualized anyway.

AP mode on a x86_64 system.

Here is the issue where the AP mode problems are being discussed:

lwfinger/rtw88#271

@Darin755
Copy link

Darin755 commented Jan 1, 2025

My kernel config:

darin@fedora:~$ cat /lib/modules/6.13.0-0.rc4.20241228gtfd0584d2.339.vanilla.fc41.x86_64/config | grep RTW88
CONFIG_RTW88=m
CONFIG_RTW88_CORE=m
CONFIG_RTW88_PCI=m
CONFIG_RTW88_SDIO=m
CONFIG_RTW88_USB=m
CONFIG_RTW88_8822B=m
CONFIG_RTW88_8822C=m
CONFIG_RTW88_8723X=m
CONFIG_RTW88_8703B=m
CONFIG_RTW88_8723D=m
CONFIG_RTW88_8821C=m
CONFIG_RTW88_8822BE=m
CONFIG_RTW88_8822BS=m
CONFIG_RTW88_8822BU=m
CONFIG_RTW88_8822CE=m
CONFIG_RTW88_8822CS=m
CONFIG_RTW88_8822CU=m
CONFIG_RTW88_8723DE=m
CONFIG_RTW88_8723DS=m
CONFIG_RTW88_8723CS=m
CONFIG_RTW88_8723DU=m
CONFIG_RTW88_8821CE=m
CONFIG_RTW88_8821CS=m
CONFIG_RTW88_8821CU=m
# CONFIG_RTW88_8821AU is not set
# CONFIG_RTW88_8812AU is not set
# CONFIG_RTW88_DEBUG is not set
# CONFIG_RTW88_DEBUGFS is not set

It looks like the Fedora next vanilla kernel does not have support enabled. I am going to ask on the fedora forums to see if anyone knows why.

@morrownr
Copy link
Owner Author

morrownr commented Jan 1, 2025

It looks like the Fedora next vanilla kernel does not have support enabled.

That probably means the firmware files are not included either. You might want to file a bug.

@vinicius-daros
Copy link

vinicius-daros commented Jan 17, 2025

  • The driver went into Linux kernel 6.13 during the week of 11-21-2024.

i can't see the RTL8821AU in the dowstream repo, only rtw8821au, so i'm assuming it didn't get in upstream, and it isn't going to work, or i'm missing something?

edit: installed the drivers from the dowstream repo and it's working :D, what tests should i run?

@ZerBea
Copy link

ZerBea commented Jan 21, 2025

rtl8821au chipset uses rtw8821au driver.

@Darin755
Copy link

So I now have 6.14.0-0.rc0.20250121gt95ec54a4.361.vanilla.fc41.x86_64 installed from the Fedora kernel next repo. I can load the kernel module just fine but as soon as I run echo "2357 011f" > /sys/bus/usb/drivers/rtw_8821au/new_id the kernel runs into a oops.

Here is the output:

[  253.498486] BUG: kernel NULL pointer dereference, address: 0000000000000010
[  253.498497] #PF: supervisor read access in kernel mode
[  253.498500] #PF: error_code(0x0000) - not-present page
[  253.498503] PGD 0 P4D 0 
[  253.498508] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
[  253.498513] CPU: 2 UID: 0 PID: 4126 Comm: bash Not tainted 6.14.0-0.rc0.20250121gt95ec54a4.361.vanilla.fc41.x86_64 #1
[  253.498518] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41 04/01/2014
[  253.498521] RIP: 0010:rtw_core_init+0x58a/0x690 [rtw88_core]
[  253.498548] Code: 0c 75 dd 48 8b 43 38 c7 43 40 0e 40 10 f0 48 8d bb f8 3e 00 00 48 c7 c2 05 60 e0 c0 48 c7 c6 7c c6 e1 c0 4c 8d ab f0 3e 00 00 <48> 8b 68 10 48 89 9b e8 3e 00 00 c7 83 38 3f 00 00 00 00 00 00 c7
[  253.498552] RSP: 0018:ffff9cddc3a7fbe8 EFLAGS: 00010246
[  253.498556] RAX: 0000000000000000 RBX: ffff8ffc96b1a000 RCX: 0000000000000000
[  253.498559] RDX: ffffffffc0e06005 RSI: ffffffffc0e1c67c RDI: ffff8ffc96b1def8
[  253.498562] RBP: 000000000000000c R08: 0000000000000000 R09: ffff8ffc00a6f9a8
[  253.498564] R10: ffffffff851db9da R11: 0000000000000000 R12: 0000000000000000
[  253.498566] R13: ffff8ffc96b1def0 R14: 0000000000000004 R15: ffff8ffc96b1f7c8
[  253.498569] FS:  00007fb52934c740(0000) GS:ffff8ffd71d00000(0000) knlGS:0000000000000000
[  253.498572] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  253.498575] CR2: 0000000000000010 CR3: 0000000143028000 CR4: 0000000000752ef0
[  253.498586] PKRU: 55555554
[  253.498588] Call Trace:
[  253.498593]  <TASK>
[  253.498600]  ? __die_body.cold+0x19/0x27
[  253.498608]  ? page_fault_oops+0x15a/0x2f0
[  253.498616]  ? exc_page_fault+0x7e/0x180
[  253.498622]  ? asm_exc_page_fault+0x26/0x30
[  253.498627]  ? alloc_unbound_pwq+0x22a/0x2d0
[  253.498637]  ? rtw_core_init+0x58a/0x690 [rtw88_core]
[  253.498653]  ? rtw_core_init+0x4da/0x690 [rtw88_core]
[  253.498668]  rtw_usb_probe+0xc1/0x8b4 [rtw88_usb]
[  253.498674]  ? pm_runtime_enable+0x1f/0x90
[  253.498681]  ? _raw_spin_unlock_irqrestore+0xe/0x40
[  253.498686]  ? __pm_runtime_set_status+0x132/0x2a0
[  253.498691]  usb_probe_interface+0x15d/0x350
[  253.498698]  really_probe+0xdb/0x340
[  253.498703]  ? pm_runtime_barrier+0x54/0x90
[  253.498709]  ? __pfx___driver_attach+0x10/0x10
[  253.498717]  __driver_probe_device+0x78/0x110
[  253.498721]  driver_probe_device+0x1f/0xa0
[  253.498725]  __driver_attach+0xba/0x1c0
[  253.498729]  bus_for_each_dev+0x8c/0xe0
[  253.498735]  usb_store_new_id+0x1cd/0x230
[  253.498742]  kernfs_fop_write_iter+0x13b/0x1f0
[  253.498748]  vfs_write+0x28d/0x450
[  253.498756]  ksys_write+0x6c/0xe0
[  253.498762]  do_syscall_64+0x82/0x160
[  253.498769]  ? clear_bhb_loop+0x25/0x80
[  253.498774]  ? clear_bhb_loop+0x25/0x80
[  253.498779]  ? clear_bhb_loop+0x25/0x80
[  253.498784]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  253.498790] RIP: 0033:0x7fb529437484
[  253.498806] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d 45 9c 10 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89
[  253.498809] RSP: 002b:00007ffcc2596358 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[  253.498814] RAX: ffffffffffffffda RBX: 000000000000000a RCX: 00007fb529437484
[  253.498816] RDX: 000000000000000a RSI: 00005601a8ad7940 RDI: 0000000000000001
[  253.498819] RBP: 00007ffcc2596380 R08: 0000000000000073 R09: 00000000ffffffff
[  253.498822] R10: 0000000000000000 R11: 0000000000000202 R12: 000000000000000a
[  253.498824] R13: 00005601a8ad7940 R14: 00007fb52953a5c0 R15: 00007fb529537e80
[  253.498829]  </TASK>
[  253.498831] Modules linked in: rtw88_8821au rtw88_8821a rtw88_88xxa rtw88_usb rtw88_core mac80211 libarc4 cfg80211 overlay uinput snd_seq_dummy snd_hrtimer sunrpc nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill ip_set nf_tables qrtr binfmt_misc intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core intel_vsec pmt_telemetry pmt_class kvm_intel snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg kvm snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device iTCO_wdt snd_pcm intel_pmc_bxt iTCO_vendor_support rapl snd_timer i2c_i801 pcspkr snd i2c_smbus virtio_balloon soundcore virtio_net lpc_ich net_failover failover pktcdvd joydev loop nfnetlink vsock_loopback vmw_vsock_virtio_transport_common zram vmw_vsock_vmci_transport lz4hc_compress vsock lz4_compress vmw_vmci crct10dif_pclmul crc32_pclmul
[  253.498928]  crc32c_intel polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 sha256_ssse3 sha1_ssse3 virtio_console virtio_blk virtio_gpu virtio_dma_buf serio_raw fuse qemu_fw_cfg
[  253.498950] CR2: 0000000000000010
[  253.498954] ---[ end trace 0000000000000000 ]---
[  253.498957] RIP: 0010:rtw_core_init+0x58a/0x690 [rtw88_core]
[  253.498973] Code: 0c 75 dd 48 8b 43 38 c7 43 40 0e 40 10 f0 48 8d bb f8 3e 00 00 48 c7 c2 05 60 e0 c0 48 c7 c6 7c c6 e1 c0 4c 8d ab f0 3e 00 00 <48> 8b 68 10 48 89 9b e8 3e 00 00 c7 83 38 3f 00 00 00 00 00 00 c7
[  253.498975] RSP: 0018:ffff9cddc3a7fbe8 EFLAGS: 00010246
[  253.498979] RAX: 0000000000000000 RBX: ffff8ffc96b1a000 RCX: 0000000000000000
[  253.498981] RDX: ffffffffc0e06005 RSI: ffffffffc0e1c67c RDI: ffff8ffc96b1def8
[  253.498984] RBP: 000000000000000c R08: 0000000000000000 R09: ffff8ffc00a6f9a8
[  253.498987] R10: ffffffff851db9da R11: 0000000000000000 R12: 0000000000000000
[  253.498989] R13: ffff8ffc96b1def0 R14: 0000000000000004 R15: ffff8ffc96b1f7c8
[  253.498992] FS:  00007fb52934c740(0000) GS:ffff8ffd71d00000(0000) knlGS:0000000000000000
[  253.498995] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  253.498998] CR2: 0000000000000010 CR3: 0000000143028000 CR4: 0000000000752ef0
[  253.499001] PKRU: 55555554
[  253.499003] note: bash[4126] exited with irqs disabled

@a5a5aa555oo
Copy link

a5a5aa555oo commented Jan 22, 2025

@Darin755

If you are on kernel 6.14, you don't need to run echo "2357 011f" > /sys/bus/usb/drivers/rtw88_8821au/new_id anymore, it is a workaround for kernel 6.13 users.

@morrownr
Copy link
Owner Author

If you are on kernel 6.14, you don't need ...

Ummm... net-next has been sent to Linus but has Linus merged it?

Just checked. Not merged yet.

@a5a5aa555oo
Copy link

a5a5aa555oo commented Jan 22, 2025

@morrownr Yes, it is not merged, but you know what? kernel 6.14 is available on Fedora 41 now!
I think this kernel was built from the source code in linux-next.

Image

@morrownr
Copy link
Owner Author

@a5a5aa555oo

So, fedora is doing some of their own cooking.

@Darin755
Copy link

Darin755 commented Jan 22, 2025

Fedora tends to do there own thing from time to time. My Wifi adapter does not work with 6.14 and lshw shows it as unclaimed. When I get time I will dig a little deeper.

@Darin755
Copy link

In 6.14.0-0.rc0.20250121gt95ec54a4.361.vanilla.fc41.x86_64 here is the output of modinfo rtw88_8821au | grep ^alias

alias:          usb:v2357p011Ed*dc*dsc*dp*icFFiscFFipFFin*

@a5a5aa555oo
Copy link

a5a5aa555oo commented Jan 22, 2025

@Darin755
Does /etc/modprobe.d/blacklist-rtw88.conf exist in your system?
if yes, remove it, or it will prevent the built-in rtw88 driver from loading when system startup.

@morrownr
Copy link
Owner Author

@Darin755

My Wifi adapter does not work with 6.14 and lshw shows it as unclaimed.

Does the driver actually exist? rtw88_8821au
Has fedora turned on the compiling of the driver?
A kernel does not include the firmware. Does your system have the firmware in the correct place?

@Darin755
Copy link

Darin755 commented Jan 22, 2025

I filled a bug about the lack of support and now it is enabled. I can do a modprobe to load the module but it still doesn't work. The module appears to load correctly but my adapter still is unclaimed.

I'll try editing the backlist but I don't think that is going to do anything.

@a5a5aa555oo
Copy link

a5a5aa555oo commented Jan 22, 2025

Is there any error message in dmesg output?
sudo dmesg | grep rtw

What does this command show?
lsmod | grep rtw

@morrownr
Copy link
Owner Author

@Darin755

The module appears to load correctly but my adapter still is unclaimed.

Remember that in-kernel drivers consist of 2 or more files. In this case, it is 2 files:

Firmware: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/rtw88

The file in this case is called: rtw8821a_fw.bin

It should be in the following directory: /lib/firmware/rtw88

Check to see if the firmware file is in place and if not, download it and cp to the where it should be.

Next: Check if the driver is where it should be:

/usr/lib/modules/$(uname -r)/kernel/drivers/net/wireless/realtek/rtw88

The name of the driver should be rtw88_8821au if it is the in-kernel driver or rtw_8821au if from our rtw88 repo.

I'll try editing the backlist but I don't think that is going to do anything.

Um... @a5a5aa555oo is asking you to delete a very specific file. Please follow his instructions carefully.

@a5a5aa555oo
Copy link

a5a5aa555oo commented Jan 22, 2025

@morrownr

@Darin755 is using the built-in rtw88 driver and he/she does NOT need /etc/modprobe.d/blacklist-rtw88.conf anymore.
Why don't you know about it?

I am very very curious why you modified README.md over 10 times but that file is still full of mistake?
and why don't you correct the mistake you made? why? it has been three weeks over. is it hard to correct the mistake in a README.md?
You have time to argue with me but no time to fix it???

@morrownr
Copy link
Owner Author

@a5a5aa555oo

@Darin755 is using the built-in rtw88 driver and he/she does NOT need /etc/modprobe.d/blacklist-rtw88.conf anymore.
Why don't you know about it?

I do know about it. Read what I wrote carefully. I am simply making sure that @Darin755 understands what you were saying. When said he would edit the file, that keyed me to think he may not have understood what you were saying.

I am very very curious why you modified README.md over 10 times but that file is still full of mistake?

Wow. Having a bad day?

You have time to argue with me but no time to fix it???

Who is arguing with you? Read what I wrote.

@Darin755
Copy link

Darin755 commented Jan 22, 2025

@morrownr @a5a5aa555oo

I checked by blacklist and I don't have the module blacklisted anywhere. I went ahead and created /etc/modules-load.d/rtw88_8821au.conf to load rtw88_8821au at startup. It loads successfully but for some reason it doesn't work with my usb adapter. I can confirm that it loaded correctly with lsmod.

So I have verified that the firmware and kernel modules are where they are suppose to be. I am not really sure what is happening but I suspect that the issue is in the USB IDs. I think it might be as simple as adding my device ID but when I try to write to new_id I just get a kernel oops.

I think the next step is to actually start debugging the oops.

Update:

So I have figured out that the oops occurs when I plug in the adapter. I can run echo "2357 011f" > /sys/bus/usb/drivers/rtw_8821au/new_id without it plugged and there isn't an issue. The problem seems to be when it tries to initialize the device.

My device is https://www.tp-link.com/us/home-networking/usb-adapter/archer-t2u/

@a5a5aa555oo
Copy link

@Darin755 You should post the output of dmesg, or no one knows what happened.

@Darin755
Copy link

@a5a5aa555oo I posted the oops already but here is the entire dmesg in case it helps.

``` [ 0.000000] Linux version 6.14.0-0.rc0.20250121gt95ec54a4.361.vanilla.fc41.x86_64 (mockbuild@57985ab78f52458fbfea3df90e8a8524) (gcc (GCC) 14.2.1 20250110 (Red Hat 14.2.1-7), GNU ld version 2.43.1-5.fc41) #1 SMP PREEMPT_DYNAMIC Tue Jan 21 07:46:20 UTC 2025 [ 0.000000] Command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.14.0-0.rc0.20250121gt95ec54a4.361.vanilla.fc41.x86_64 root=UUID=b177fe71-d250-40f9-88a3-cf7b18c80bdc ro rootflags=subvol=root rhgb quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffdbfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffdc000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000279ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000001] kvm-clock: using sched offset of 1800608064 cycles [ 0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000005] tsc: Detected 2496.000 MHz processor [ 0.000351] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000353] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000357] last_pfn = 0x27a000 max_arch_pfn = 0x400000000 [ 0.000381] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000384] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000413] last_pfn = 0x7ffdc max_arch_pfn = 0x400000000 [ 0.003205] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.003222] Using GB pages for direct mapping [ 0.003745] RAMDISK: [mem 0x35008000-0x367fbfff] [ 0.003750] ACPI: Early table checksum verification disabled [ 0.003754] ACPI: RSDP 0x00000000000F51A0 000014 (v00 BOCHS ) [ 0.003757] ACPI: RSDT 0x000000007FFE2D24 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003761] ACPI: FACP 0x000000007FFE2B3C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003769] ACPI: DSDT 0x000000007FFE0040 002AFC (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003771] ACPI: FACS 0x000000007FFE0000 000040 [ 0.003772] ACPI: APIC 0x000000007FFE2C30 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003774] ACPI: MCFG 0x000000007FFE2CC0 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003775] ACPI: WAET 0x000000007FFE2CFC 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003776] ACPI: Reserving FACP table memory at [mem 0x7ffe2b3c-0x7ffe2c2f] [ 0.003777] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe2b3b] [ 0.003778] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.003778] ACPI: Reserving APIC table memory at [mem 0x7ffe2c30-0x7ffe2cbf] [ 0.003778] ACPI: Reserving MCFG table memory at [mem 0x7ffe2cc0-0x7ffe2cfb] [ 0.003779] ACPI: Reserving WAET table memory at [mem 0x7ffe2cfc-0x7ffe2d23] [ 0.004012] No NUMA configuration found [ 0.004013] Faking a node at [mem 0x0000000000000000-0x0000000279ffffff] [ 0.004019] NODE_DATA(0) allocated [mem 0x279fd32c0-0x279ffdfff] [ 0.004142] Zone ranges: [ 0.004143] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.004144] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.004145] Normal [mem 0x0000000100000000-0x0000000279ffffff] [ 0.004146] Device empty [ 0.004147] Movable zone start for each node [ 0.004148] Early memory node ranges [ 0.004148] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.004149] node 0: [mem 0x0000000000100000-0x000000007ffdbfff] [ 0.004150] node 0: [mem 0x0000000100000000-0x0000000279ffffff] [ 0.004151] Initmem setup node 0 [mem 0x0000000000001000-0x0000000279ffffff] [ 0.004432] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.004440] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.038995] On node 0, zone Normal: 36 pages in unavailable ranges [ 0.039159] On node 0, zone Normal: 24576 pages in unavailable ranges [ 0.040905] ACPI: PM-Timer IO Port: 0x608 [ 0.040922] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.040974] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.040977] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.040978] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.040979] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.040980] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.040981] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.040983] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.040985] TSC deadline timer available [ 0.040988] CPU topo: Max. logical packages: 4 [ 0.040989] CPU topo: Max. logical dies: 4 [ 0.040989] CPU topo: Max. dies per package: 1 [ 0.040992] CPU topo: Max. threads per core: 1 [ 0.040992] CPU topo: Num. cores per package: 1 [ 0.040993] CPU topo: Num. threads per package: 1 [ 0.040993] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.041013] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.041026] kvm-guest: KVM setup pv remote TLB flush [ 0.041029] kvm-guest: setup PV sched yield [ 0.041036] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.041038] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.041038] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.041039] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.041039] PM: hibernation: Registered nosave memory: [mem 0x7ffdc000-0x7fffffff] [ 0.041040] PM: hibernation: Registered nosave memory: [mem 0x80000000-0xafffffff] [ 0.041040] PM: hibernation: Registered nosave memory: [mem 0xb0000000-0xbfffffff] [ 0.041041] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xfed1bfff] [ 0.041041] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.041041] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfeffbfff] [ 0.041042] PM: hibernation: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.041042] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xfffbffff] [ 0.041042] PM: hibernation: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.041044] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.041045] Booting paravirtualized kernel on KVM [ 0.041047] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.046303] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.047548] percpu: Embedded 88 pages/cpu s237568 r8192 d114688 u524288 [ 0.047553] pcpu-alloc: s237568 r8192 d114688 u524288 alloc=1*2097152 [ 0.047557] pcpu-alloc: [0] 0 1 2 3 [ 0.047592] kvm-guest: PV spinlocks enabled [ 0.047594] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.047597] Kernel command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.14.0-0.rc0.20250121gt95ec54a4.361.vanilla.fc41.x86_64 root=UUID=b177fe71-d250-40f9-88a3-cf7b18c80bdc ro rootflags=subvol=root rhgb quiet [ 0.047675] Unknown kernel command line parameters "rhgb BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.14.0-0.rc0.20250121gt95ec54a4.361.vanilla.fc41.x86_64", will be passed to user space. [ 0.047685] random: crng init done [ 0.047687] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes [ 0.049312] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.050140] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.050202] Fallback order for Node 0: 0 [ 0.050206] Built 1 zonelists, mobility grouping on. Total pages: 2072442 [ 0.050206] Policy zone: Normal [ 0.050642] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.050648] software IO TLB: area num 4. [ 0.097638] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.097670] ftrace: allocating 57381 entries in 225 pages [ 0.121514] ftrace: allocated 225 pages with 4 groups [ 0.122058] Dynamic Preempt: lazy [ 0.122418] rcu: Preemptible hierarchical RCU implementation. [ 0.122419] rcu: RCU event tracing is enabled. [ 0.122419] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.122421] Trampoline variant of Tasks RCU enabled. [ 0.122421] Rude variant of Tasks RCU enabled. [ 0.122422] Tracing variant of Tasks RCU enabled. [ 0.122422] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.122423] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.122431] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.122433] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.122435] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.127119] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.127315] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.127424] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.135643] Console: colour VGA+ 80x25 [ 0.135647] printk: legacy console [tty0] enabled [ 0.135681] ACPI: Core revision 20240827 [ 0.135731] APIC: Switch to symmetric I/O mode setup [ 0.135860] x2apic enabled [ 0.136034] APIC: Switched APIC routing to: physical x2apic [ 0.136038] kvm-guest: APIC: send_IPI_mask() replaced with kvm_send_ipi_mask() [ 0.136043] kvm-guest: APIC: send_IPI_mask_allbutself() replaced with kvm_send_ipi_mask_allbutself() [ 0.136043] kvm-guest: setup PV IPIs [ 0.136588] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns [ 0.136595] Calibrating delay loop (skipped) preset value.. 4992.00 BogoMIPS (lpj=2496000) [ 0.136688] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.136747] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.136748] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.136755] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.136759] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall and VM exit [ 0.136759] Spectre V2 : Mitigation: Enhanced / Automatic IBRS [ 0.136760] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.136760] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT [ 0.136761] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.136762] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.136763] Register File Data Sampling: Mitigation: Clear Register File [ 0.136777] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.136778] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.136779] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.136779] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.136780] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.136781] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 [ 0.136782] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. [ 0.137592] Freeing SMP alternatives memory: 48K [ 0.137592] pid_max: default: 32768 minimum: 301 [ 0.137592] LSM: initializing lsm=lockdown,capability,yama,selinux,bpf,landlock,ipe,ima,evm [ 0.137592] Yama: becoming mindful. [ 0.137592] SELinux: Initializing. [ 0.137592] LSM support for eBPF active [ 0.137592] landlock: Up and running. [ 0.137592] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.137592] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.137592] smpboot: CPU0: 12th Gen Intel(R) Core(TM) i5-1235U (family: 0x6, model: 0x9a, stepping: 0x4) [ 0.137592] Performance Events: unsupported p6 CPU model 154 no PMU driver, software events only. [ 0.137592] signal: max sigframe size: 3632 [ 0.137592] rcu: Hierarchical SRCU implementation. [ 0.137592] rcu: Max phase no-delay instances is 400. [ 0.137592] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.137592] NMI watchdog: Perf NMI watchdog permanently disabled [ 0.137592] smp: Bringing up secondary CPUs ... [ 0.137592] smpboot: x86: Booting SMP configuration: [ 0.137592] .... node #0, CPUs: #1 #2 #3 [ 0.141960] smp: Brought up 1 node, 4 CPUs [ 0.141960] smpboot: Total of 4 processors activated (19968.00 BogoMIPS) [ 0.141977] Memory: 7983968K/8289768K available (22528K kernel code, 4456K rwdata, 16192K rodata, 4908K init, 4688K bss, 298268K reserved, 0K cma-reserved) [ 0.142802] devtmpfs: initialized [ 0.142802] x86/mm: Memory block size: 128MB [ 0.143096] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.143602] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.143662] pinctrl core: initialized pinctrl subsystem [ 0.143769] PM: RTC time: 20:41:30, date: 2025-01-22 [ 0.144280] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.144942] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.145040] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.145157] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.145167] audit: initializing netlink subsys (disabled) [ 0.145178] audit: type=2000 audit(1737578490.900:1): state=initialized audit_enabled=0 res=1 [ 0.145178] thermal_sys: Registered thermal governor 'fair_share' [ 0.145178] thermal_sys: Registered thermal governor 'bang_bang' [ 0.145178] thermal_sys: Registered thermal governor 'step_wise' [ 0.145178] thermal_sys: Registered thermal governor 'user_space' [ 0.145178] cpuidle: using governor menu [ 0.145178] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.145653] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 0.145657] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.145665] PCI: Using configuration type 1 for base access [ 0.145785] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.148653] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.148653] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.148653] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.148653] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.148733] cryptd: max_cpu_qlen set to 1000 [ 0.148733] raid6: skipped pq benchmark and selected avx2x4 [ 0.148733] raid6: using avx2x2 recovery algorithm [ 0.148996] ACPI: Added _OSI(Module Device) [ 0.148996] ACPI: Added _OSI(Processor Device) [ 0.148996] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.148996] ACPI: Added _OSI(Processor Aggregator Device) [ 0.149488] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.154747] ACPI: Interpreter enabled [ 0.154757] ACPI: PM: (supports S0 S5) [ 0.154759] ACPI: Using IOAPIC for interrupt routing [ 0.154862] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.154864] PCI: Using E820 reservations for host bridge windows [ 0.154949] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.155975] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.155981] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.156009] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR DPC] [ 0.156043] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability] [ 0.156352] PCI host bridge to bus 0000:00 [ 0.156354] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.156356] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.156357] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.156359] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 0.156360] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.156361] pci_bus 0000:00: root bus resource [mem 0x7000000000-0x77ffffffff window] [ 0.156363] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.156427] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 0.156983] pci 0000:00:01.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 0.161613] pci 0000:00:01.0: BAR 0 [mem 0xfc000000-0xfc7fffff pref] [ 0.167605] pci 0000:00:01.0: BAR 2 [mem 0x70e0000000-0x70e0003fff 64bit pref] [ 0.171608] pci 0000:00:01.0: BAR 4 [mem 0xfea14000-0xfea14fff] [ 0.176311] pci 0000:00:01.0: ROM [mem 0xfea00000-0xfea0ffff pref] [ 0.176359] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.176802] pci 0000:00:02.0: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.178038] pci 0000:00:02.0: BAR 0 [mem 0xfea15000-0xfea15fff] [ 0.179600] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.179625] pci 0000:00:02.0: bridge window [mem 0xfe800000-0xfe9fffff] [ 0.180105] pci 0000:00:02.0: bridge window [mem 0x70d0000000-0x70dfffffff 64bit pref] [ 0.180662] pci 0000:00:02.1: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.183362] pci 0000:00:02.1: BAR 0 [mem 0xfea16000-0xfea16fff] [ 0.186986] pci 0000:00:02.1: PCI bridge to [bus 02] [ 0.187018] pci 0000:00:02.1: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.187445] pci 0000:00:02.1: bridge window [mem 0x70c0000000-0x70cfffffff 64bit pref] [ 0.188007] pci 0000:00:02.2: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.189011] pci 0000:00:02.2: BAR 0 [mem 0xfea17000-0xfea17fff] [ 0.191379] pci 0000:00:02.2: PCI bridge to [bus 03] [ 0.191402] pci 0000:00:02.2: bridge window [mem 0xfe400000-0xfe5fffff] [ 0.191798] pci 0000:00:02.2: bridge window [mem 0x70b0000000-0x70bfffffff 64bit pref] [ 0.192326] pci 0000:00:02.3: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.193574] pci 0000:00:02.3: BAR 0 [mem 0xfea18000-0xfea18fff] [ 0.195382] pci 0000:00:02.3: PCI bridge to [bus 04] [ 0.195410] pci 0000:00:02.3: bridge window [mem 0xfe200000-0xfe3fffff] [ 0.198613] pci 0000:00:02.3: bridge window [mem 0x70a0000000-0x70afffffff 64bit pref] [ 0.199205] pci 0000:00:02.4: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.200329] pci 0000:00:02.4: BAR 0 [mem 0xfea19000-0xfea19fff] [ 0.201600] pci 0000:00:02.4: PCI bridge to [bus 05] [ 0.201622] pci 0000:00:02.4: bridge window [mem 0xfe000000-0xfe1fffff] [ 0.202020] pci 0000:00:02.4: bridge window [mem 0x7090000000-0x709fffffff 64bit pref] [ 0.202544] pci 0000:00:02.5: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.204597] pci 0000:00:02.5: BAR 0 [mem 0xfea1a000-0xfea1afff] [ 0.206005] pci 0000:00:02.5: PCI bridge to [bus 06] [ 0.206029] pci 0000:00:02.5: bridge window [mem 0xfde00000-0xfdffffff] [ 0.206459] pci 0000:00:02.5: bridge window [mem 0x7080000000-0x708fffffff 64bit pref] [ 0.206988] pci 0000:00:02.6: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.208004] pci 0000:00:02.6: BAR 0 [mem 0xfea1b000-0xfea1bfff] [ 0.213601] pci 0000:00:02.6: PCI bridge to [bus 07] [ 0.213775] pci 0000:00:02.6: bridge window [mem 0xfdc00000-0xfddfffff] [ 0.214217] pci 0000:00:02.6: bridge window [mem 0x7070000000-0x707fffffff 64bit pref] [ 0.214781] pci 0000:00:02.7: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.215596] pci 0000:00:02.7: BAR 0 [mem 0xfea1c000-0xfea1cfff] [ 0.216979] pci 0000:00:02.7: PCI bridge to [bus 08] [ 0.217002] pci 0000:00:02.7: bridge window [mem 0xfda00000-0xfdbfffff] [ 0.218362] pci 0000:00:02.7: bridge window [mem 0x7060000000-0x706fffffff 64bit pref] [ 0.219789] pci 0000:00:03.0: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.224210] pci 0000:00:03.0: BAR 0 [mem 0xfea1d000-0xfea1dfff] [ 0.229608] pci 0000:00:03.0: PCI bridge to [bus 09] [ 0.229656] pci 0000:00:03.0: bridge window [mem 0xfd800000-0xfd9fffff] [ 0.230629] pci 0000:00:03.0: bridge window [mem 0x7050000000-0x705fffffff 64bit pref] [ 0.231619] pci 0000:00:03.1: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.235599] pci 0000:00:03.1: BAR 0 [mem 0xfea1e000-0xfea1efff] [ 0.238610] pci 0000:00:03.1: PCI bridge to [bus 0a] [ 0.238638] pci 0000:00:03.1: bridge window [mem 0xfd600000-0xfd7fffff] [ 0.239551] pci 0000:00:03.1: bridge window [mem 0x7040000000-0x704fffffff 64bit pref] [ 0.240139] pci 0000:00:03.2: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.242543] pci 0000:00:03.2: BAR 0 [mem 0xfea1f000-0xfea1ffff] [ 0.248053] pci 0000:00:03.2: PCI bridge to [bus 0b] [ 0.248078] pci 0000:00:03.2: bridge window [mem 0xfd400000-0xfd5fffff] [ 0.248614] pci 0000:00:03.2: bridge window [mem 0x7030000000-0x703fffffff 64bit pref] [ 0.249207] pci 0000:00:03.3: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.250372] pci 0000:00:03.3: BAR 0 [mem 0xfea20000-0xfea20fff] [ 0.251599] pci 0000:00:03.3: PCI bridge to [bus 0c] [ 0.251628] pci 0000:00:03.3: bridge window [mem 0xfd200000-0xfd3fffff] [ 0.252174] pci 0000:00:03.3: bridge window [mem 0x7020000000-0x702fffffff 64bit pref] [ 0.252704] pci 0000:00:03.4: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.255418] pci 0000:00:03.4: BAR 0 [mem 0xfea21000-0xfea21fff] [ 0.261418] pci 0000:00:03.4: PCI bridge to [bus 0d] [ 0.261444] pci 0000:00:03.4: bridge window [mem 0xfd000000-0xfd1fffff] [ 0.261812] pci 0000:00:03.4: bridge window [mem 0x7010000000-0x701fffffff 64bit pref] [ 0.262439] pci 0000:00:03.5: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.263596] pci 0000:00:03.5: BAR 0 [mem 0xfea22000-0xfea22fff] [ 0.264996] pci 0000:00:03.5: PCI bridge to [bus 0e] [ 0.265019] pci 0000:00:03.5: bridge window [mem 0xfce00000-0xfcffffff] [ 0.265615] pci 0000:00:03.5: bridge window [mem 0x7000000000-0x700fffffff 64bit pref] [ 0.266261] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 conventional PCI endpoint [ 0.266596] pci 0000:00:1b.0: BAR 0 [mem 0xfea10000-0xfea13fff] [ 0.269211] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 0.269477] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.269623] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 0.275599] pci 0000:00:1f.2: BAR 4 [io 0xc040-0xc05f] [ 0.276342] pci 0000:00:1f.2: BAR 5 [mem 0xfea23000-0xfea23fff] [ 0.278405] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 0.280179] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 0.281587] acpiphp: Slot [0] registered [ 0.281706] pci 0000:01:00.0: [1af4:1041] type 00 class 0x020000 PCIe Endpoint [ 0.285601] pci 0000:01:00.0: BAR 1 [mem 0xfe840000-0xfe840fff] [ 0.287598] pci 0000:01:00.0: BAR 4 [mem 0x70d0000000-0x70d0003fff 64bit pref] [ 0.288388] pci 0000:01:00.0: ROM [mem 0xfe800000-0xfe83ffff pref] [ 0.289566] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.290228] acpiphp: Slot [0-2] registered [ 0.290308] pci 0000:02:00.0: [1b36:000d] type 00 class 0x0c0330 PCIe Endpoint [ 0.291595] pci 0000:02:00.0: BAR 0 [mem 0xfe600000-0xfe603fff 64bit] [ 0.294059] pci 0000:00:02.1: PCI bridge to [bus 02] [ 0.294646] acpiphp: Slot [0-3] registered [ 0.296654] pci 0000:03:00.0: [1af4:1043] type 00 class 0x078000 PCIe Endpoint [ 0.297975] pci 0000:03:00.0: BAR 1 [mem 0xfe400000-0xfe400fff] [ 0.300000] pci 0000:03:00.0: BAR 4 [mem 0x70b0000000-0x70b0003fff 64bit pref] [ 0.302527] pci 0000:00:02.2: PCI bridge to [bus 03] [ 0.302921] acpiphp: Slot [0-4] registered [ 0.303027] pci 0000:04:00.0: [1af4:1042] type 00 class 0x010000 PCIe Endpoint [ 0.304435] pci 0000:04:00.0: BAR 1 [mem 0xfe200000-0xfe200fff] [ 0.311367] pci 0000:04:00.0: BAR 4 [mem 0x70a0000000-0x70a0003fff 64bit pref] [ 0.312939] pci 0000:00:02.3: PCI bridge to [bus 04] [ 0.313539] acpiphp: Slot [0-5] registered [ 0.313643] pci 0000:05:00.0: [1af4:1045] type 00 class 0x00ff00 PCIe Endpoint [ 0.315596] pci 0000:05:00.0: BAR 4 [mem 0x7090000000-0x7090003fff 64bit pref] [ 0.316856] pci 0000:00:02.4: PCI bridge to [bus 05] [ 0.317480] acpiphp: Slot [0-6] registered [ 0.317582] pci 0000:06:00.0: [1af4:1044] type 00 class 0x00ff00 PCIe Endpoint [ 0.318978] pci 0000:06:00.0: BAR 1 [mem 0xfde00000-0xfde00fff] [ 0.324597] pci 0000:06:00.0: BAR 4 [mem 0x7080000000-0x7080003fff 64bit pref] [ 0.326229] pci 0000:00:02.5: PCI bridge to [bus 06] [ 0.326713] acpiphp: Slot [0-7] registered [ 0.326724] pci 0000:00:02.6: PCI bridge to [bus 07] [ 0.327275] acpiphp: Slot [0-8] registered [ 0.327285] pci 0000:00:02.7: PCI bridge to [bus 08] [ 0.327701] acpiphp: Slot [0-9] registered [ 0.327712] pci 0000:00:03.0: PCI bridge to [bus 09] [ 0.328236] acpiphp: Slot [0-10] registered [ 0.328246] pci 0000:00:03.1: PCI bridge to [bus 0a] [ 0.328699] acpiphp: Slot [0-11] registered [ 0.328712] pci 0000:00:03.2: PCI bridge to [bus 0b] [ 0.329239] acpiphp: Slot [0-12] registered [ 0.329249] pci 0000:00:03.3: PCI bridge to [bus 0c] [ 0.329696] acpiphp: Slot [0-13] registered [ 0.329709] pci 0000:00:03.4: PCI bridge to [bus 0d] [ 0.330235] acpiphp: Slot [0-14] registered [ 0.330245] pci 0000:00:03.5: PCI bridge to [bus 0e] [ 0.339274] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.339317] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.339352] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.339386] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.339418] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.339450] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.339482] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.339514] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.339528] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.339532] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.339535] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.339538] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.339542] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.339545] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.339548] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.339552] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.340599] iommu: Default domain type: Translated [ 0.340600] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.340686] SCSI subsystem initialized [ 0.340705] libata version 3.00 loaded. [ 0.340705] ACPI: bus type USB registered [ 0.340705] usbcore: registered new interface driver usbfs [ 0.340705] usbcore: registered new interface driver hub [ 0.340705] usbcore: registered new device driver usb [ 0.340705] pps_core: LinuxPPS API ver. 1 registered [ 0.340705] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.340705] PTP clock support registered [ 0.340705] EDAC MC: Ver: 3.0.0 [ 0.341838] NetLabel: Initializing [ 0.341839] NetLabel: domain hash size = 128 [ 0.341840] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.341852] NetLabel: unlabeled traffic allowed by default [ 0.341854] mctp: management component transport protocol core [ 0.341855] NET: Registered PF_MCTP protocol family [ 0.341863] PCI: Using ACPI for IRQ routing [ 0.373249] PCI: pci_cache_line_size set to 64 bytes [ 0.373513] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.373528] e820: reserve RAM buffer [mem 0x7ffdc000-0x7fffffff] [ 0.373529] e820: reserve RAM buffer [mem 0x27a000000-0x27bffffff] [ 0.373655] pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 0.373655] pci 0000:00:01.0: vgaarb: bridge control possible [ 0.373655] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.373655] vgaarb: loaded [ 0.373680] clocksource: Switched to clocksource kvm-clock [ 0.373820] VFS: Disk quotas dquot_6.6.0 [ 0.373825] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.373864] pnp: PnP ACPI init [ 0.373953] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.374061] pnp: PnP ACPI: found 5 devices [ 0.380337] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.380378] NET: Registered PF_INET protocol family [ 0.380750] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.391420] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.391441] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.391474] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.391894] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.392031] TCP: Hash tables configured (established 65536 bind 65536) [ 0.392084] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.392119] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.392152] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.392197] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.392216] NET: Registered PF_XDP protocol family [ 0.392225] pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.392230] pci 0000:00:02.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.392232] pci 0000:00:02.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.392234] pci 0000:00:02.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.392235] pci 0000:00:02.4: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000 [ 0.392237] pci 0000:00:02.5: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 0.392238] pci 0000:00:02.6: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000 [ 0.392239] pci 0000:00:02.7: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000 [ 0.392240] pci 0000:00:03.0: bridge window [io 0x1000-0x0fff] to [bus 09] add_size 1000 [ 0.392242] pci 0000:00:03.1: bridge window [io 0x1000-0x0fff] to [bus 0a] add_size 1000 [ 0.392243] pci 0000:00:03.2: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000 [ 0.392244] pci 0000:00:03.3: bridge window [io 0x1000-0x0fff] to [bus 0c] add_size 1000 [ 0.392245] pci 0000:00:03.4: bridge window [io 0x1000-0x0fff] to [bus 0d] add_size 1000 [ 0.392246] pci 0000:00:03.5: bridge window [io 0x1000-0x0fff] to [bus 0e] add_size 1000 [ 0.392255] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]: assigned [ 0.392256] pci 0000:00:02.1: bridge window [io 0x2000-0x2fff]: assigned [ 0.392257] pci 0000:00:02.2: bridge window [io 0x3000-0x3fff]: assigned [ 0.392258] pci 0000:00:02.3: bridge window [io 0x4000-0x4fff]: assigned [ 0.392259] pci 0000:00:02.4: bridge window [io 0x5000-0x5fff]: assigned [ 0.392260] pci 0000:00:02.5: bridge window [io 0x6000-0x6fff]: assigned [ 0.392261] pci 0000:00:02.6: bridge window [io 0x7000-0x7fff]: assigned [ 0.392262] pci 0000:00:02.7: bridge window [io 0x8000-0x8fff]: assigned [ 0.392263] pci 0000:00:03.0: bridge window [io 0x9000-0x9fff]: assigned [ 0.392263] pci 0000:00:03.1: bridge window [io 0xa000-0xafff]: assigned [ 0.392264] pci 0000:00:03.2: bridge window [io 0xb000-0xbfff]: assigned [ 0.392265] pci 0000:00:03.3: bridge window [io 0xd000-0xdfff]: assigned [ 0.392266] pci 0000:00:03.4: bridge window [io 0xe000-0xefff]: assigned [ 0.392267] pci 0000:00:03.5: bridge window [io 0xf000-0xffff]: assigned [ 0.392338] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.392362] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 0.393155] pci 0000:00:02.0: bridge window [mem 0xfe800000-0xfe9fffff] [ 0.393602] pci 0000:00:02.0: bridge window [mem 0x70d0000000-0x70dfffffff 64bit pref] [ 0.394415] pci 0000:00:02.1: PCI bridge to [bus 02] [ 0.394422] pci 0000:00:02.1: bridge window [io 0x2000-0x2fff] [ 0.395034] pci 0000:00:02.1: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.395461] pci 0000:00:02.1: bridge window [mem 0x70c0000000-0x70cfffffff 64bit pref] [ 0.398154] pci 0000:00:02.2: PCI bridge to [bus 03] [ 0.398164] pci 0000:00:02.2: bridge window [io 0x3000-0x3fff] [ 0.398935] pci 0000:00:02.2: bridge window [mem 0xfe400000-0xfe5fffff] [ 0.399396] pci 0000:00:02.2: bridge window [mem 0x70b0000000-0x70bfffffff 64bit pref] [ 0.400247] pci 0000:00:02.3: PCI bridge to [bus 04] [ 0.400255] pci 0000:00:02.3: bridge window [io 0x4000-0x4fff] [ 0.400857] pci 0000:00:02.3: bridge window [mem 0xfe200000-0xfe3fffff] [ 0.401325] pci 0000:00:02.3: bridge window [mem 0x70a0000000-0x70afffffff 64bit pref] [ 0.402214] pci 0000:00:02.4: PCI bridge to [bus 05] [ 0.402219] pci 0000:00:02.4: bridge window [io 0x5000-0x5fff] [ 0.402807] pci 0000:00:02.4: bridge window [mem 0xfe000000-0xfe1fffff] [ 0.403197] pci 0000:00:02.4: bridge window [mem 0x7090000000-0x709fffffff 64bit pref] [ 0.404040] pci 0000:00:02.5: PCI bridge to [bus 06] [ 0.404046] pci 0000:00:02.5: bridge window [io 0x6000-0x6fff] [ 0.404655] pci 0000:00:02.5: bridge window [mem 0xfde00000-0xfdffffff] [ 0.405104] pci 0000:00:02.5: bridge window [mem 0x7080000000-0x708fffffff 64bit pref] [ 0.406838] pci 0000:00:02.6: PCI bridge to [bus 07] [ 0.406845] pci 0000:00:02.6: bridge window [io 0x7000-0x7fff] [ 0.411441] pci 0000:00:02.6: bridge window [mem 0xfdc00000-0xfddfffff] [ 0.411855] pci 0000:00:02.6: bridge window [mem 0x7070000000-0x707fffffff 64bit pref] [ 0.412632] pci 0000:00:02.7: PCI bridge to [bus 08] [ 0.412639] pci 0000:00:02.7: bridge window [io 0x8000-0x8fff] [ 0.413225] pci 0000:00:02.7: bridge window [mem 0xfda00000-0xfdbfffff] [ 0.413617] pci 0000:00:02.7: bridge window [mem 0x7060000000-0x706fffffff 64bit pref] [ 0.414416] pci 0000:00:03.0: PCI bridge to [bus 09] [ 0.414423] pci 0000:00:03.0: bridge window [io 0x9000-0x9fff] [ 0.415044] pci 0000:00:03.0: bridge window [mem 0xfd800000-0xfd9fffff] [ 0.415568] pci 0000:00:03.0: bridge window [mem 0x7050000000-0x705fffffff 64bit pref] [ 0.416413] pci 0000:00:03.1: PCI bridge to [bus 0a] [ 0.416420] pci 0000:00:03.1: bridge window [io 0xa000-0xafff] [ 0.417014] pci 0000:00:03.1: bridge window [mem 0xfd600000-0xfd7fffff] [ 0.417454] pci 0000:00:03.1: bridge window [mem 0x7040000000-0x704fffffff 64bit pref] [ 0.418274] pci 0000:00:03.2: PCI bridge to [bus 0b] [ 0.418281] pci 0000:00:03.2: bridge window [io 0xb000-0xbfff] [ 0.418885] pci 0000:00:03.2: bridge window [mem 0xfd400000-0xfd5fffff] [ 0.419283] pci 0000:00:03.2: bridge window [mem 0x7030000000-0x703fffffff 64bit pref] [ 0.420105] pci 0000:00:03.3: PCI bridge to [bus 0c] [ 0.420112] pci 0000:00:03.3: bridge window [io 0xd000-0xdfff] [ 0.420824] pci 0000:00:03.3: bridge window [mem 0xfd200000-0xfd3fffff] [ 0.421612] pci 0000:00:03.3: bridge window [mem 0x7020000000-0x702fffffff 64bit pref] [ 0.424421] pci 0000:00:03.4: PCI bridge to [bus 0d] [ 0.424429] pci 0000:00:03.4: bridge window [io 0xe000-0xefff] [ 0.426447] pci 0000:00:03.4: bridge window [mem 0xfd000000-0xfd1fffff] [ 0.426846] pci 0000:00:03.4: bridge window [mem 0x7010000000-0x701fffffff 64bit pref] [ 0.427652] pci 0000:00:03.5: PCI bridge to [bus 0e] [ 0.427660] pci 0000:00:03.5: bridge window [io 0xf000-0xffff] [ 0.428288] pci 0000:00:03.5: bridge window [mem 0xfce00000-0xfcffffff] [ 0.428888] pci 0000:00:03.5: bridge window [mem 0x7000000000-0x700fffffff 64bit pref] [ 0.429818] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.429819] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.429821] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.429822] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 0.429823] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.429823] pci_bus 0000:00: resource 9 [mem 0x7000000000-0x77ffffffff window] [ 0.429825] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.429826] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff] [ 0.429827] pci_bus 0000:01: resource 2 [mem 0x70d0000000-0x70dfffffff 64bit pref] [ 0.429829] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.429829] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe7fffff] [ 0.429830] pci_bus 0000:02: resource 2 [mem 0x70c0000000-0x70cfffffff 64bit pref] [ 0.429831] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.429832] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe5fffff] [ 0.429833] pci_bus 0000:03: resource 2 [mem 0x70b0000000-0x70bfffffff 64bit pref] [ 0.429834] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 0.429834] pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe3fffff] [ 0.429835] pci_bus 0000:04: resource 2 [mem 0x70a0000000-0x70afffffff 64bit pref] [ 0.429837] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff] [ 0.429837] pci_bus 0000:05: resource 1 [mem 0xfe000000-0xfe1fffff] [ 0.429838] pci_bus 0000:05: resource 2 [mem 0x7090000000-0x709fffffff 64bit pref] [ 0.429839] pci_bus 0000:06: resource 0 [io 0x6000-0x6fff] [ 0.429839] pci_bus 0000:06: resource 1 [mem 0xfde00000-0xfdffffff] [ 0.429840] pci_bus 0000:06: resource 2 [mem 0x7080000000-0x708fffffff 64bit pref] [ 0.429841] pci_bus 0000:07: resource 0 [io 0x7000-0x7fff] [ 0.429842] pci_bus 0000:07: resource 1 [mem 0xfdc00000-0xfddfffff] [ 0.429842] pci_bus 0000:07: resource 2 [mem 0x7070000000-0x707fffffff 64bit pref] [ 0.429843] pci_bus 0000:08: resource 0 [io 0x8000-0x8fff] [ 0.429844] pci_bus 0000:08: resource 1 [mem 0xfda00000-0xfdbfffff] [ 0.429844] pci_bus 0000:08: resource 2 [mem 0x7060000000-0x706fffffff 64bit pref] [ 0.429845] pci_bus 0000:09: resource 0 [io 0x9000-0x9fff] [ 0.429846] pci_bus 0000:09: resource 1 [mem 0xfd800000-0xfd9fffff] [ 0.429847] pci_bus 0000:09: resource 2 [mem 0x7050000000-0x705fffffff 64bit pref] [ 0.429848] pci_bus 0000:0a: resource 0 [io 0xa000-0xafff] [ 0.429849] pci_bus 0000:0a: resource 1 [mem 0xfd600000-0xfd7fffff] [ 0.429850] pci_bus 0000:0a: resource 2 [mem 0x7040000000-0x704fffffff 64bit pref] [ 0.429850] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.429851] pci_bus 0000:0b: resource 1 [mem 0xfd400000-0xfd5fffff] [ 0.429852] pci_bus 0000:0b: resource 2 [mem 0x7030000000-0x703fffffff 64bit pref] [ 0.429853] pci_bus 0000:0c: resource 0 [io 0xd000-0xdfff] [ 0.429853] pci_bus 0000:0c: resource 1 [mem 0xfd200000-0xfd3fffff] [ 0.429854] pci_bus 0000:0c: resource 2 [mem 0x7020000000-0x702fffffff 64bit pref] [ 0.429855] pci_bus 0000:0d: resource 0 [io 0xe000-0xefff] [ 0.429856] pci_bus 0000:0d: resource 1 [mem 0xfd000000-0xfd1fffff] [ 0.429856] pci_bus 0000:0d: resource 2 [mem 0x7010000000-0x701fffffff 64bit pref] [ 0.429857] pci_bus 0000:0e: resource 0 [io 0xf000-0xffff] [ 0.429858] pci_bus 0000:0e: resource 1 [mem 0xfce00000-0xfcffffff] [ 0.429858] pci_bus 0000:0e: resource 2 [mem 0x7000000000-0x700fffffff 64bit pref] [ 0.430158] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.431180] PCI: CLS 0 bytes, default 64 [ 0.431233] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.431234] software IO TLB: mapped [mem 0x000000007bfdc000-0x000000007ffdc000] (64MB) [ 0.431307] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns [ 0.431423] Trying to unpack rootfs image as initramfs... [ 0.439834] AES CTR mode by8 optimization enabled [ 0.441990] Initialise system trusted keyrings [ 0.442006] Key type blacklist registered [ 0.442129] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.442152] zbud: loaded [ 0.442611] integrity: Platform Keyring initialized [ 0.442614] integrity: Machine keyring initialized [ 0.450000] NET: Registered PF_ALG protocol family [ 0.450007] xor: automatically using best checksumming function avx [ 0.450010] Key type asymmetric registered [ 0.450011] Asymmetric key parser 'x509' registered [ 0.527782] Freeing initrd memory: 24528K [ 0.530824] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.530857] io scheduler mq-deadline registered [ 0.530858] io scheduler kyber registered [ 0.530862] io scheduler bfq registered [ 0.532281] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.534374] pcieport 0000:00:02.0: PME: Signaling with IRQ 24 [ 0.534503] pcieport 0000:00:02.0: AER: enabled with IRQ 24 [ 0.536191] pcieport 0000:00:02.1: PME: Signaling with IRQ 25 [ 0.536323] pcieport 0000:00:02.1: AER: enabled with IRQ 25 [ 0.538153] pcieport 0000:00:02.2: PME: Signaling with IRQ 26 [ 0.538436] pcieport 0000:00:02.2: AER: enabled with IRQ 26 [ 0.540181] pcieport 0000:00:02.3: PME: Signaling with IRQ 27 [ 0.540406] pcieport 0000:00:02.3: AER: enabled with IRQ 27 [ 0.542110] pcieport 0000:00:02.4: PME: Signaling with IRQ 28 [ 0.543057] pcieport 0000:00:02.4: AER: enabled with IRQ 28 [ 0.544879] pcieport 0000:00:02.5: PME: Signaling with IRQ 29 [ 0.545112] pcieport 0000:00:02.5: AER: enabled with IRQ 29 [ 0.546368] pcieport 0000:00:02.6: PME: Signaling with IRQ 30 [ 0.546529] pcieport 0000:00:02.6: AER: enabled with IRQ 30 [ 0.548041] pcieport 0000:00:02.7: PME: Signaling with IRQ 31 [ 0.548354] pcieport 0000:00:02.7: AER: enabled with IRQ 31 [ 0.548655] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.550968] pcieport 0000:00:03.0: PME: Signaling with IRQ 32 [ 0.551188] pcieport 0000:00:03.0: AER: enabled with IRQ 32 [ 0.552852] pcieport 0000:00:03.1: PME: Signaling with IRQ 33 [ 0.553057] pcieport 0000:00:03.1: AER: enabled with IRQ 33 [ 0.555779] pcieport 0000:00:03.2: PME: Signaling with IRQ 34 [ 0.555995] pcieport 0000:00:03.2: AER: enabled with IRQ 34 [ 0.557873] pcieport 0000:00:03.3: PME: Signaling with IRQ 35 [ 0.558062] pcieport 0000:00:03.3: AER: enabled with IRQ 35 [ 0.559113] pcieport 0000:00:03.4: PME: Signaling with IRQ 36 [ 0.559339] pcieport 0000:00:03.4: AER: enabled with IRQ 36 [ 0.560488] pcieport 0000:00:03.5: PME: Signaling with IRQ 37 [ 0.560708] pcieport 0000:00:03.5: AER: enabled with IRQ 37 [ 0.560914] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.560995] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.561330] ACPI: button: Power Button [PWRF] [ 0.562098] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.569786] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.570209] 00:00: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.571817] Non-volatile memory driver v1.3 [ 0.572468] Linux agpgart interface v0.103 [ 0.572567] ACPI: bus type drm_connector registered [ 0.573209] ahci 0000:00:1f.2: version 3.0 [ 0.573345] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.573703] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 0.573705] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.573706] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.574867] scsi host0: ahci [ 0.574951] scsi host1: ahci [ 0.575004] scsi host2: ahci [ 0.575100] scsi host3: ahci [ 0.575152] scsi host4: ahci [ 0.575198] scsi host5: ahci [ 0.575230] ata1: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23100 irq 40 lpm-pol 0 [ 0.575234] ata2: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23180 irq 40 lpm-pol 0 [ 0.575238] ata3: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23200 irq 40 lpm-pol 0 [ 0.575241] ata4: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23280 irq 40 lpm-pol 0 [ 0.575245] ata5: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23300 irq 40 lpm-pol 0 [ 0.575249] ata6: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23380 irq 40 lpm-pol 0 [ 0.575854] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.575890] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 0.576059] xhci_hcd 0000:02:00.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 0.576514] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.576556] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 0.576557] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 0.576614] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14 [ 0.576616] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.576616] usb usb1: Product: xHCI Host Controller [ 0.576617] usb usb1: Manufacturer: Linux 6.14.0-0.rc0.20250121gt95ec54a4.361.vanilla.fc41.x86_64 xhci-hcd [ 0.576618] usb usb1: SerialNumber: 0000:02:00.0 [ 0.576684] hub 1-0:1.0: USB hub found [ 0.576736] hub 1-0:1.0: 15 ports detected [ 0.577062] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.577075] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14 [ 0.577076] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.577076] usb usb2: Product: xHCI Host Controller [ 0.577077] usb usb2: Manufacturer: Linux 6.14.0-0.rc0.20250121gt95ec54a4.361.vanilla.fc41.x86_64 xhci-hcd [ 0.577078] usb usb2: SerialNumber: 0000:02:00.0 [ 0.577119] hub 2-0:1.0: USB hub found [ 0.577992] hub 2-0:1.0: 15 ports detected [ 0.578791] usbcore: registered new interface driver usbserial_generic [ 0.578794] usbserial: USB Serial support registered for generic [ 0.578820] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.579357] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.579361] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.579411] mousedev: PS/2 mouse device common for all mice [ 0.579446] rtc_cmos 00:03: RTC can wake from S4 [ 0.579710] rtc_cmos 00:03: registered as rtc0 [ 0.579751] rtc_cmos 00:03: setting system clock to 2025-01-22T20:41:30 UTC (1737578490) [ 0.579785] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram [ 0.579796] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.579800] device-mapper: uevent: version 1.0.3 [ 0.579827] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected] [ 0.580366] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.581376] intel_pstate: CPU model not supported [ 0.581467] hid: raw HID events driver (C) Jiri Kosina [ 0.581486] usbcore: registered new interface driver usbhid [ 0.581486] usbhid: USB HID core driver [ 0.581559] drop_monitor: Initializing network drop monitor service [ 0.581986] Initializing XFRM netlink socket [ 0.582006] NET: Registered PF_INET6 protocol family [ 0.586644] Segment Routing with IPv6 [ 0.586646] RPL Segment Routing with IPv6 [ 0.586653] In-situ OAM (IOAM) with IPv6 [ 0.586668] mip6: Mobile IPv6 [ 0.586671] NET: Registered PF_PACKET protocol family [ 0.587051] IPI shorthand broadcast: enabled [ 0.588171] sched_clock: Marking stable (578001798, 9269298)->(669943002, -82671906) [ 0.588430] registered taskstats version 1 [ 0.588694] Loading compiled-in X.509 certificates [ 0.595508] Loaded X.509 cert 'Fedora kernel signing key: ff576a4a7b53a9c37b269db0465a94f8d1222d1a' [ 0.607656] Loaded X.509 cert 'Fedora IMA CA: a8a00c31663f853f9c6ff2564872e378af026b28' [ 0.610515] Demotion targets for Node 0: null [ 0.610520] page_owner is disabled [ 0.611015] Key type .fscrypt registered [ 0.611016] Key type fscrypt-provisioning registered [ 0.612612] Btrfs loaded, zoned=yes, fsverity=yes [ 0.612793] Key type big_key registered [ 0.634085] Key type encrypted registered [ 0.634099] ima: No TPM chip found, activating TPM-bypass! [ 0.634103] Loading compiled-in module X.509 certificates [ 0.634416] Loaded X.509 cert 'Fedora kernel signing key: ff576a4a7b53a9c37b269db0465a94f8d1222d1a' [ 0.634418] ima: Allocated hash algorithm: sha256 [ 0.634426] ima: No architecture policies found [ 0.634438] evm: Initialising EVM extended attributes: [ 0.634438] evm: security.selinux [ 0.634439] evm: security.SMACK64 (disabled) [ 0.634440] evm: security.SMACK64EXEC (disabled) [ 0.634440] evm: security.SMACK64TRANSMUTE (disabled) [ 0.634441] evm: security.SMACK64MMAP (disabled) [ 0.634441] evm: security.apparmor (disabled) [ 0.634442] evm: security.ima [ 0.634442] evm: security.capability [ 0.634442] evm: HMAC attrs: 0x1 [ 0.635966] alg: No test for 842 (842-scomp) [ 0.635992] alg: No test for 842 (842-generic) [ 0.636687] PM: Magic number: 9:876:700 [ 0.639723] RAS: Correctable Errors collector initialized. [ 0.649364] clk: Disabling unused clocks [ 0.649367] PM: genpd: Disabling unused power domains [ 0.817322] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 0.883685] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.884143] ata2: SATA link down (SStatus 0 SControl 300) [ 0.884555] ata5: SATA link down (SStatus 0 SControl 300) [ 0.884908] ata3: SATA link down (SStatus 0 SControl 300) [ 0.885017] ata1.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 0.885028] ata1.00: applying bridge limits [ 0.885265] ata1.00: configured for UDMA/100 [ 0.886073] scsi 0:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 0.891471] ata6: SATA link down (SStatus 0 SControl 300) [ 0.891938] ata4: SATA link down (SStatus 0 SControl 300) [ 0.916085] sr 0:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 0.916094] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.927715] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.927987] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.942049] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 [ 0.942054] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 [ 0.942056] usb 1-1: Product: QEMU USB Tablet [ 0.942057] usb 1-1: Manufacturer: QEMU [ 0.942058] usb 1-1: SerialNumber: 28754-0000:00:02.1:00.0-1 [ 0.943200] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:02.1/0000:02:00.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4 [ 0.943766] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:02:00.0-1/input0 [ 0.946061] Freeing unused decrypted memory: 2028K [ 0.946784] Freeing unused kernel image (initmem) memory: 4908K [ 0.946799] Write protecting the kernel read-only data: 38912k [ 0.947111] Freeing unused kernel image (rodata/data gap) memory: 192K [ 0.952380] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.952384] Run /init as init process [ 0.952385] with arguments: [ 0.952387] /init [ 0.952387] rhgb [ 0.952388] with environment: [ 0.952388] HOME=/ [ 0.952389] TERM=linux [ 0.952389] BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.14.0-0.rc0.20250121gt95ec54a4.361.vanilla.fc41.x86_64 [ 0.960238] systemd[1]: Successfully made /usr/ read-only. [ 0.960420] systemd[1]: systemd 256.11-1.fc41 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT +LIBARCHIVE) [ 0.960422] systemd[1]: Detected virtualization kvm. [ 0.960443] systemd[1]: Detected architecture x86-64. [ 0.960444] systemd[1]: Running in initrd. [ 0.960516] systemd[1]: No hostname configured, using default hostname. [ 0.960541] systemd[1]: Hostname set to . [ 1.021567] systemd[1]: Queued start job for default target initrd.target. [ 1.034654] systemd[1]: Expecting device dev-disk-by\x2duuid-b177fe71\x2dd250\x2d40f9\x2d88a3\x2dcf7b18c80bdc.device - /dev/disk/by-uuid/b177fe71-d250-40f9-88a3-cf7b18c80bdc... [ 1.034697] systemd[1]: Reached target initrd-usr-fs.target - Initrd /usr File System. [ 1.034712] systemd[1]: Reached target slices.target - Slice Units. [ 1.034721] systemd[1]: Reached target swap.target - Swaps. [ 1.034727] systemd[1]: Reached target timers.target - Timer Units. [ 1.034773] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 1.034803] systemd[1]: Listening on systemd-journald.socket - Journal Sockets. [ 1.034832] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 1.034852] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 1.034859] systemd[1]: Reached target sockets.target - Socket Units. [ 1.035391] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 1.035414] systemd[1]: memstrack.service - Memstrack Anylazing Service was skipped because no trigger condition checks were met. [ 1.037980] systemd[1]: Starting systemd-journald.service - Journal Service... [ 1.038521] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 1.039003] systemd[1]: Starting systemd-vconsole-setup.service - Virtual Console Setup... [ 1.039419] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 1.041075] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 1.049239] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully. [ 1.049789] systemd[1]: Starting systemd-sysusers.service - Create System Users... [ 1.050328] systemd-journald[320]: Collecting audit messages is disabled. [ 1.055051] fuse: init (API version 7.41) [ 1.055868] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 1.056665] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 1.074326] systemd[1]: Started systemd-journald.service - Journal Service. [ 1.227327] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 1.384463] [drm] pci: virtio-vga detected at 0000:00:01.0 [ 1.384663] virtio-pci 0000:00:01.0: vgaarb: deactivate vga console [ 1.412913] Console: switching to colour dummy device 80x25 [ 1.413027] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.413028] [drm] features: -context_init [ 1.414907] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.417925] [drm] number of scanouts: 1 [ 1.417930] [drm] number of cap sets: 0 [ 1.426769] virtio_blk virtio3: [vda] 52428800 512-byte logical blocks (26.8 GB/25.0 GiB) [ 1.431928] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:01.0 on minor 0 [ 1.433560] vda: vda1 vda2 vda3 [ 1.436534] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.437640] Console: switching to colour frame buffer device 160x50 [ 1.447470] virtio-pci 0000:00:01.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.063037] BTRFS: device label fedora devid 1 transid 471 /dev/vda3 (252:3) scanned by mount (535) [ 2.063663] BTRFS info (device vda3): first mount of filesystem b177fe71-d250-40f9-88a3-cf7b18c80bdc [ 2.063681] BTRFS info (device vda3): using crc32c (crc32c-intel) checksum algorithm [ 2.063686] BTRFS info (device vda3): using free-space-tree [ 2.321982] systemd-journald[320]: Received SIGTERM from PID 1 (systemd). [ 2.372224] audit: type=1404 audit(1737578492.291:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1 [ 2.408335] SELinux: Permission nlmsg in class netlink_route_socket not defined in policy. [ 2.408339] SELinux: Permission nlmsg in class netlink_tcpdiag_socket not defined in policy. [ 2.408340] SELinux: Permission nlmsg in class netlink_xfrm_socket not defined in policy. [ 2.408342] SELinux: Permission nlmsg in class netlink_audit_socket not defined in policy. [ 2.408358] SELinux: the above unknown classes and permissions will be allowed [ 2.410725] SELinux: policy capability network_peer_controls=1 [ 2.410729] SELinux: policy capability open_perms=1 [ 2.410730] SELinux: policy capability extended_socket_class=1 [ 2.410730] SELinux: policy capability always_check_network=0 [ 2.410731] SELinux: policy capability cgroup_seclabel=1 [ 2.410731] SELinux: policy capability nnp_nosuid_transition=1 [ 2.410731] SELinux: policy capability genfs_seclabel_symlinks=1 [ 2.410732] SELinux: policy capability ioctl_skip_cloexec=0 [ 2.410732] SELinux: policy capability userspace_initial_context=0 [ 2.410732] SELinux: policy capability netlink_xperm=0 [ 2.448568] audit: type=1403 audit(1737578492.368:3): auid=4294967295 ses=4294967295 lsm=selinux res=1 [ 2.449100] systemd[1]: Successfully loaded SELinux policy in 77.319ms. [ 2.482965] systemd[1]: Relabeled /dev/, /dev/shm/, /run/ in 14.206ms. [ 2.484490] systemd[1]: systemd 256.11-1.fc41 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT +LIBARCHIVE) [ 2.484493] systemd[1]: Detected virtualization kvm. [ 2.484500] systemd[1]: Detected architecture x86-64. [ 2.683996] systemd[1]: bpf-restrict-fs: LSM BPF program attached [ 2.794109] Guest personality initialized and is inactive [ 2.794296] VMCI host device registered (name=vmci, major=10, minor=123) [ 2.794298] Initialized host personality [ 2.794699] zram: Added device: zram0 [ 2.797063] NET: Registered PF_VSOCK protocol family [ 2.963528] systemd[1]: run-credentials-systemd\x2djournald.service.mount: Deactivated successfully. [ 2.964099] systemd[1]: initrd-switch-root.service: Deactivated successfully. [ 2.964183] systemd[1]: Stopped initrd-switch-root.service - Switch Root. [ 2.965027] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 2.965320] systemd[1]: Created slice machine.slice - Virtual Machine and Container Slice. [ 2.965587] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 2.965810] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 2.966009] systemd[1]: Created slice system-systemd\x2dzram\x2dsetup.slice - Slice /system/systemd-zram-setup. [ 2.966162] systemd[1]: Created slice user.slice - User and Session Slice. [ 2.966190] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). [ 2.966345] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 2.966694] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 2.966719] systemd[1]: Expecting device dev-disk-by\x2duuid-087fd462\x2d501e\x2d4459\x2d92b7\x2dbfbd0b327ed1.device - /dev/disk/by-uuid/087fd462-501e-4459-92b7-bfbd0b327ed1... [ 2.966730] systemd[1]: Expecting device dev-disk-by\x2duuid-b177fe71\x2dd250\x2d40f9\x2d88a3\x2dcf7b18c80bdc.device - /dev/disk/by-uuid/b177fe71-d250-40f9-88a3-cf7b18c80bdc... [ 2.966740] systemd[1]: Expecting device dev-zram0.device - /dev/zram0... [ 2.966755] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 2.966769] systemd[1]: Reached target getty.target - Login Prompts. [ 2.966786] systemd[1]: Stopped target initrd-switch-root.target - Switch Root. [ 2.966800] systemd[1]: Stopped target initrd-fs.target - Initrd File Systems. [ 2.966810] systemd[1]: Stopped target initrd-root-fs.target - Initrd Root File System. [ 2.966822] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 2.966858] systemd[1]: Reached target slices.target - Slice Units. [ 2.966884] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 2.967207] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. [ 2.968671] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. [ 2.969657] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket. [ 2.970194] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption. [ 2.970313] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 2.970584] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 2.970761] systemd[1]: Listening on systemd-mountfsd.socket - DDI File System Mounter Socket. [ 2.970914] systemd[1]: Listening on systemd-nsresourced.socket - Namespace Resource Manager Socket. [ 2.971141] systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket. [ 2.971169] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 2.971176] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 2.972070] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 2.972267] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 2.972439] systemd[1]: Listening on systemd-userdbd.socket - User Database Manager Socket. [ 2.975068] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 2.975752] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 2.977787] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 2.993848] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 2.994217] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). [ 2.995996] systemd[1]: iscsi-starter.service was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/var/lib/iscsi/nodes). [ 2.997124] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 2.999374] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 3.000245] systemd[1]: Starting [email protected] - Load Kernel Module configfs... [ 3.001343] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 3.003372] systemd[1]: Starting [email protected] - Load Kernel Module drm... [ 3.010503] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 3.012415] systemd[1]: Starting [email protected] - Load Kernel Module fuse... [ 3.014026] systemd[1]: Starting [email protected] - Load Kernel Module loop... [ 3.014112] systemd[1]: plymouth-switch-root.service: Deactivated successfully. [ 3.014190] systemd[1]: Stopped plymouth-switch-root.service - Plymouth switch root service. [ 3.014445] systemd[1]: systemd-fsck-root.service: Deactivated successfully. [ 3.014510] systemd[1]: Stopped systemd-fsck-root.service - File System Check on Root Device. [ 3.014623] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). [ 3.023524] systemd[1]: Starting systemd-journald.service - Journal Service... [ 3.026448] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 3.028211] loop: module loaded [ 3.028409] systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line... [ 3.029403] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 3.030633] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 3.030729] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 3.033957] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials... [ 3.037715] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 3.041655] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 3.041909] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 3.042110] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 3.042826] BTRFS info (device vda3 state M): use zstd compression, level 1 [ 3.044890] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 3.045163] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 3.045491] systemd[1]: [email protected]: Deactivated successfully. [ 3.045651] systemd[1]: Finished [email protected] - Load Kernel Module configfs. [ 3.045906] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 3.046122] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 3.046418] systemd[1]: [email protected]: Deactivated successfully. [ 3.046565] systemd[1]: Finished [email protected] - Load Kernel Module drm. [ 3.046836] systemd[1]: Finished lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 3.047081] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 3.047215] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 3.047857] systemd[1]: [email protected]: Deactivated successfully. [ 3.048001] systemd[1]: Finished [email protected] - Load Kernel Module fuse. [ 3.048249] systemd[1]: [email protected]: Deactivated successfully. [ 3.048404] systemd[1]: Finished [email protected] - Load Kernel Module loop. [ 3.048643] systemd[1]: Finished systemd-network-generator.service - Generate network units from Kernel command line. [ 3.048877] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 3.050470] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 3.050536] systemd[1]: iscsi-onboot.service - Special handling of early boot iSCSI sessions was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/class/iscsi_session). [ 3.050854] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). [ 3.050916] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 3.051944] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... [ 3.052016] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 3.055466] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 3.055574] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 3.058680] systemd-journald[644]: Collecting audit messages is enabled. [ 3.067279] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials. [ 3.067800] systemd[1]: Started systemd-journald.service - Journal Service. [ 3.068943] audit: type=1130 audit(1737578492.987:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-load-credentials comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.068946] audit: type=1130 audit(1737578492.987:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.084456] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.084591] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.084675] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 3.092902] audit: type=1334 audit(1737578493.011:6): prog-id=32 op=LOAD [ 3.092908] audit: type=1334 audit(1737578493.011:7): prog-id=33 op=LOAD [ 3.092910] audit: type=1334 audit(1737578493.011:8): prog-id=34 op=LOAD [ 3.097503] audit: type=1334 audit(1737578493.016:9): prog-id=35 op=LOAD [ 3.097509] audit: type=1334 audit(1737578493.016:10): prog-id=36 op=LOAD [ 3.098447] systemd-journald[644]: Received client request to flush runtime journal. [ 3.100902] systemd-journald[644]: File /var/log/journal/251a2902c68b4c3eb05aa93320d3c81d/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 3.178443] usbcore: registered new interface driver rtw_8821au [ 3.430084] zram0: detected capacity change from 0 to 16046080 [ 3.496284] usb 1-3: new high-speed USB device number 3 using xhci_hcd [ 3.526339] Adding 8023036k swap on /dev/zram0. Priority:100 extents:1 across:8023036k SSDsc [ 3.546791] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized [ 3.578883] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 3.583476] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.590470] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 3.609636] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 3.688476] virtio_net virtio1 enp1s0: renamed from eth0 [ 3.692090] iTCO_vendor_support: vendor-support=0 [ 3.696323] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) [ 3.696790] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 3.742865] usb 1-3: New USB device found, idVendor=2357, idProduct=011f, bcdDevice= 2.00 [ 3.742872] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.742873] usb 1-3: Product: 802.11ac WLAN Adapter [ 3.742874] usb 1-3: Manufacturer: Realtek [ 3.742875] usb 1-3: SerialNumber: 00e04c000001 [ 3.756529] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x3/0x0/0x0/0x0/0x0) type:line [ 3.756534] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.756535] snd_hda_codec_generic hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.756536] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0 [ 3.756537] snd_hda_codec_generic hdaudioC0D0: inputs: [ 3.756537] snd_hda_codec_generic hdaudioC0D0: Line=0x5 [ 3.786613] intel_rapl_msr: PL4 support detected. [ 3.990433] EXT4-fs (vda2): mounted filesystem 087fd462-501e-4459-92b7-bfbd0b327ed1 r/w with ordered data mode. Quota mode: none. [ 4.548499] NET: Registered PF_QIPCRTR protocol family [ 5.046560] RPC: Registered named UNIX socket transport module. [ 5.046565] RPC: Registered udp transport module. [ 5.046565] RPC: Registered tcp transport module. [ 5.046566] RPC: Registered tcp-with-tls transport module. [ 5.046567] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.331847] rfkill: input handler disabled [ 8.195945] input: spice vdagent tablet as /devices/virtual/input/input6 [ 8.259474] input: spice vdagent tablet as /devices/virtual/input/input7 [ 11.136583] systemd-journald[644]: File /var/log/journal/251a2902c68b4c3eb05aa93320d3c81d/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 11.201706] rfkill: input handler enabled [ 12.299156] rfkill: input handler disabled [ 13.427572] input: spice vdagent tablet as /devices/virtual/input/input8 [ 15.674232] evm: overlay not supported [ 26.776749] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 26.776757] #PF: supervisor read access in kernel mode [ 26.776760] #PF: error_code(0x0000) - not-present page [ 26.776763] PGD 0 P4D 0 [ 26.776767] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI [ 26.776772] CPU: 2 UID: 0 PID: 3093 Comm: bash Not tainted 6.14.0-0.rc0.20250121gt95ec54a4.361.vanilla.fc41.x86_64 #1 [ 26.776777] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41 04/01/2014 [ 26.776780] RIP: 0010:rtw_core_init+0x58a/0x690 [rtw88_core] [ 26.776802] Code: 0c 75 dd 48 8b 43 38 c7 43 40 0e 40 10 f0 48 8d bb f8 3e 00 00 48 c7 c2 05 40 6a c0 48 c7 c6 7c a6 6b c0 4c 8d ab f0 3e 00 00 <48> 8b 68 10 48 89 9b e8 3e 00 00 c7 83 38 3f 00 00 00 00 00 00 c7 [ 26.776806] RSP: 0018:ffff9d0d437db9b8 EFLAGS: 00010246 [ 26.776810] RAX: 0000000000000000 RBX: ffff91297ae12000 RCX: 0000000000000000 [ 26.776813] RDX: ffffffffc06a4005 RSI: ffffffffc06ba67c RDI: ffff91297ae15ef8 [ 26.776815] RBP: 000000000000000c R08: 0000000000000000 R09: ffff9129008f4730 [ 26.776818] R10: ffffffff941db9da R11: 0000000000000000 R12: 0000000000000000 [ 26.776820] R13: ffff91297ae15ef0 R14: 0000000000000004 R15: ffff91297ae177c8 [ 26.776822] FS: 00007fe1756c2740(0000) GS:ffff912a71d00000(0000) knlGS:0000000000000000 [ 26.776826] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 26.776828] CR2: 0000000000000010 CR3: 000000010b558000 CR4: 0000000000752ef0 [ 26.776837] PKRU: 55555554 [ 26.776839] Call Trace: [ 26.776842] [ 26.776844] ? __die_body.cold+0x19/0x27 [ 26.776854] ? page_fault_oops+0x15a/0x2f0 [ 26.776863] ? exc_page_fault+0x7e/0x180 [ 26.776871] ? asm_exc_page_fault+0x26/0x30 [ 26.776878] ? alloc_unbound_pwq+0x22a/0x2d0 [ 26.776889] ? rtw_core_init+0x58a/0x690 [rtw88_core] [ 26.776908] ? rtw_core_init+0x4da/0x690 [rtw88_core] [ 26.776929] rtw_usb_probe+0xc1/0x8b4 [rtw88_usb] [ 26.776936] ? pm_runtime_enable+0x1f/0x90 [ 26.776944] ? _raw_spin_unlock_irqrestore+0xe/0x40 [ 26.776950] ? __pm_runtime_set_status+0x132/0x2a0 [ 26.776956] usb_probe_interface+0x15d/0x350 [ 26.776964] really_probe+0xdb/0x340 [ 26.776969] ? pm_runtime_barrier+0x54/0x90 [ 26.776976] ? __pfx___driver_attach+0x10/0x10 [ 26.776980] __driver_probe_device+0x78/0x110 [ 26.776985] driver_probe_device+0x1f/0xa0 [ 26.776990] __driver_attach+0xba/0x1c0 [ 26.776995] bus_for_each_dev+0x8c/0xe0 [ 26.777002] usb_store_new_id+0x1cd/0x230 [ 26.777010] kernfs_fop_write_iter+0x13b/0x1f0 [ 26.777016] vfs_write+0x28d/0x450 [ 26.777025] ksys_write+0x6c/0xe0 [ 26.777033] do_syscall_64+0x82/0x160 [ 26.777040] ? do_dup2+0xb4/0x140 [ 26.777046] ? ksys_dup3+0x63/0xf0 [ 26.777056] ? syscall_exit_to_user_mode+0x10/0x210 [ 26.777062] ? do_syscall_64+0x8e/0x160 [ 26.777068] ? get_close_on_exec+0x34/0x40 [ 26.777074] ? do_fcntl+0x2ee/0x760 [ 26.777081] ? __x64_sys_fcntl+0x94/0xe0 [ 26.777085] ? syscall_exit_to_user_mode+0x10/0x210 [ 26.777091] ? do_syscall_64+0x8e/0x160 [ 26.777096] ? clear_bhb_loop+0x25/0x80 [ 26.777102] ? clear_bhb_loop+0x25/0x80 [ 26.777107] ? clear_bhb_loop+0x25/0x80 [ 26.777112] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 26.777119] RIP: 0033:0x7fe1757ad484 [ 26.777133] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d 45 9c 10 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 [ 26.777137] RSP: 002b:00007ffe550ded58 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 26.777142] RAX: ffffffffffffffda RBX: 000000000000000a RCX: 00007fe1757ad484 [ 26.777145] RDX: 000000000000000a RSI: 000055d4b0b77940 RDI: 0000000000000001 [ 26.777148] RBP: 00007ffe550ded80 R08: 0000000000000073 R09: 00000000ffffffff [ 26.777151] R10: 0000000000000000 R11: 0000000000000202 R12: 000000000000000a [ 26.777154] R13: 000055d4b0b77940 R14: 00007fe1758b05c0 R15: 00007fe1758ade80 [ 26.777159] [ 26.777162] Modules linked in: overlay uinput snd_seq_dummy snd_hrtimer nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct sunrpc nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables qrtr binfmt_misc joydev intel_rapl_msr intel_rapl_common snd_hda_codec_generic intel_uncore_frequency_common intel_pmc_core intel_vsec pmt_telemetry pmt_class snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec kvm_intel snd_hda_core iTCO_wdt intel_pmc_bxt snd_hwdep iTCO_vendor_support kvm snd_seq rapl snd_seq_device i2c_i801 i2c_smbus snd_pcm pcspkr virtio_net net_failover lpc_ich virtio_balloon snd_timer snd soundcore failover pktcdvd rtw88_8821au rtw88_8821a rtw88_88xxa rtw88_usb rtw88_core mac80211 libarc4 cfg80211 rfkill loop nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vsock zram vmw_vmci lz4hc_compress lz4_compress crct10dif_pclmul crc32_pclmul [ 26.777277] crc32c_intel polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 virtio_blk sha256_ssse3 sha1_ssse3 virtio_gpu virtio_console virtio_dma_buf serio_raw fuse qemu_fw_cfg [ 26.777303] CR2: 0000000000000010 [ 26.777307] ---[ end trace 0000000000000000 ]--- [ 26.777310] RIP: 0010:rtw_core_init+0x58a/0x690 [rtw88_core] [ 26.777333] Code: 0c 75 dd 48 8b 43 38 c7 43 40 0e 40 10 f0 48 8d bb f8 3e 00 00 48 c7 c2 05 40 6a c0 48 c7 c6 7c a6 6b c0 4c 8d ab f0 3e 00 00 <48> 8b 68 10 48 89 9b e8 3e 00 00 c7 83 38 3f 00 00 00 00 00 00 c7 [ 26.777337] RSP: 0018:ffff9d0d437db9b8 EFLAGS: 00010246 [ 26.777341] RAX: 0000000000000000 RBX: ffff91297ae12000 RCX: 0000000000000000 [ 26.777344] RDX: ffffffffc06a4005 RSI: ffffffffc06ba67c RDI: ffff91297ae15ef8 [ 26.777347] RBP: 000000000000000c R08: 0000000000000000 R09: ffff9129008f4730 [ 26.777350] R10: ffffffff941db9da R11: 0000000000000000 R12: 0000000000000000 [ 26.777353] R13: ffff91297ae15ef0 R14: 0000000000000004 R15: ffff91297ae177c8 [ 26.777356] FS: 00007fe1756c2740(0000) GS:ffff912a71d00000(0000) knlGS:0000000000000000 [ 26.777360] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 26.777363] CR2: 0000000000000010 CR3: 000000010b558000 CR4: 0000000000752ef0 [ 26.777367] PKRU: 55555554 [ 26.777370] note: bash[3093] exited with irqs disabled
</details>

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests