TQC-A01 have no netwok

[lrhwind]

Device Information | 设备信息

• SOC: H6
• Model [TQC-A01]

Armbian Version | 系统版本

• Kernel Version: [6.6.31]
• Release: [jammy/noble]

Describe the bug | 问题描述
有线网卡和无线网卡都没有正确驱动
All network can't use.System can't find network interface.

[zongru666]

臣附议

[13584452567]

问题是ac200未驱动导致。
问题未能准确定位
同样的代码在arch linux下没出现问题。有点摸不着头脑

[lrhwind]

有没有一个已知是可以正常使用的版本？

[ophub]

你测试下昨天编译的

[lrhwind]

好的，我试试

[lrhwind]

不行，最后显示找不到对应的UUID， 我用DG看了一下ROOTFS的UUID就是：99D23EAC-BCB0-4FE0-A79441DC29690F8D，TTL输出如下：

Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.6.32-zicai (root@fv-az979-164) (aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 13.2.rel1 (Build arm-13.7)) 13.2.1 20231009, GNU ld (Arm GNU Toolchain 13.2.rel1 (Build arm-13.7)) 2.41.0.20231009) #1 SMP Sat May 25 23:07:48 EDT 2024
[ 0.000000] Machine model: TQC A01
[ 0.000000] Memory limited to 2048MB
[ 0.000000] efi: UEFI not found.
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] cma: Reserved 64 MiB at 0x000000007ac00000 on node -1
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 21 pages/cpu s48296 r8192 d29528 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: root=UUID=99d23eac-bcb0-4fe0-a794-41dc29690f8d rootflags=data=writeback rw rootfstype=ext4 console=ttyS0,115200 console=tty0 mem=2048M video=HDMI-A-1:e no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 max_loop=128 bootsplash.bootfile=bootsplash.armbian
[ 0.000000] Unknown kernel command line parameters "max_loop=128", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x0000000076b80000-0x000000007ab80000] (64MB)
[ 0.000000] Memory: 858800K/1048576K available (15488K kernel code, 2164K rwdata, 5868K rodata, 3840K init, 676K bss, 124240K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000127] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000878] Console: colour dummy device 80x25
[ 0.000890] printk: console [tty0] enabled
[ 0.001275] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.001299] pid_max: default: 32768 minimum: 301
[ 0.003973] LSM: initializing lsm=capability,yama
[ 0.004000] Yama: becoming mindful.
[ 0.004802] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.004829] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.008562] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.009606] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.009898] rcu: Hierarchical SRCU implementation.
[ 0.009911] rcu: Max phase no-delay instances is 1000.
[ 0.011645] EFI services will not be available.
[ 0.012048] smp: Bringing up secondary CPUs ...
[ 0.013069] Detected VIPT I-cache on CPU1
[ 0.013174] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.014080] Detected VIPT I-cache on CPU2
[ 0.014148] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.014950] Detected VIPT I-cache on CPU3
[ 0.015008] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.015102] smp: Brought up 1 node, 4 CPUs
[ 0.015163] SMP: Total of 4 processors activated.
[ 0.015176] CPU features: detected: 32-bit EL0 Support
[ 0.015186] CPU features: detected: 32-bit EL1 Support
[ 0.015199] CPU features: detected: CRC32 instructions
[ 0.015288] CPU: All CPU(s) started at EL2
[ 0.015310] alternatives: applying system-wide alternatives
[ 0.017824] devtmpfs: initialized
[ 0.025139] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.025194] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.029367] pinctrl core: initialized pinctrl subsystem
[ 0.030143] DMI not present or invalid.
[ 0.031197] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.032610] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.032753] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.032910] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.034112] audit: initializing netlink subsys (disabled)
[ 0.034384] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1
[ 0.035019] thermal_sys: Registered thermal governor 'fair_share'
[ 0.035026] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.035040] thermal_sys: Registered thermal governor 'step_wise'
[ 0.035052] thermal_sys: Registered thermal governor 'user_space'
[ 0.035064] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.035120] cpuidle: using governor ladder
[ 0.035160] cpuidle: using governor menu
[ 0.035450] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.035585] ASID allocator initialised with 65536 entries
[ 0.036527] Serial: AMBA PL011 UART driver
[ 0.047906] platform 6000000.hdmi: Fixed dependency cycle(s) with /soc/tcon-top@6510000
[ 0.048410] platform 6000000.hdmi: Fixed dependency cycle(s) with /soc/tcon-top@6510000
[ 0.048567] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/hdmi@6000000
[ 0.048647] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/lcd-controller@6515000
[ 0.048676] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000
[ 0.048901] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/lcd-controller@6515000
[ 0.049046] platform 6515000.lcd-controller: Fixed dependency cycle(s) with /soc/tcon-top@6510000
[ 0.051010] platform 6000000.hdmi: Fixed dependency cycle(s) with /connector
[ 0.051110] platform connector: Fixed dependency cycle(s) with /soc/hdmi@6000000
[ 0.053040] Modules: 25712 pages in range for non-PLT usage
[ 0.053046] Modules: 517232 pages in range for PLT usage
[ 0.054322] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.054349] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.054364] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.054376] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.054389] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.054401] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.054415] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.054427] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.055513] cryptd: max_cpu_qlen set to 1000
[ 0.057360] ACPI: Interpreter disabled.
[ 0.057823] iommu: Default domain type: Translated
[ 0.057843] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.058799] SCSI subsystem initialized
[ 0.059239] usbcore: registered new interface driver usbfs
[ 0.059297] usbcore: registered new interface driver hub
[ 0.059343] usbcore: registered new device driver usb
[ 0.059822] pps_core: LinuxPPS API ver. 1 registered
[ 0.059836] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [email protected]
[ 0.059877] PTP clock support registered
[ 0.060229] EDAC MC: Ver: 3.0.0
[ 0.060682] scmi_core: SCMI protocol bus registered
[ 0.061124] Advanced Linux Sound Architecture Driver Initialized.
[ 0.062146] NetLabel: Initializing
[ 0.062160] NetLabel: domain hash size = 128
[ 0.062171] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.062251] NetLabel: unlabeled traffic allowed by default
[ 0.062455] vgaarb: loaded
[ 0.062955] clocksource: Switched to clocksource arch_sys_counter
[ 0.063565] VFS: Disk quotas dquot_6.6.0
[ 0.063613] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.064138] pnp: PnP ACPI: disabled
[ 0.073758] NET: Registered PF_INET protocol family
[ 0.073976] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.076651] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.076695] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.076722] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.076864] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.077156] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.077671] MPTCP token hash table entries: 1024 (order: 2, 24576 bytes, linear)
[ 0.077862] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.077907] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.078426] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.079121] RPC: Registered named UNIX socket transport module.
[ 0.079138] RPC: Registered udp transport module.
[ 0.079149] RPC: Registered tcp transport module.
[ 0.079160] RPC: Registered tcp-with-tls transport module.
[ 0.079170] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.079196] PCI: CLS 0 bytes, default 64
[ 0.079404] Trying to unpack rootfs image as initramfs...
[ 0.083406] kvm [1]: IPA Size Limit: 40 bits
[ 0.085424] kvm [1]: vgic interrupt IRQ9
[ 0.085471] kvm [1]: Hyp mode initialized successfully
[ 0.087735] Initialise system trusted keyrings
[ 0.088047] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.088129] zbud: loaded
[ 0.094499] NFS: Registering the id_resolver key type
[ 0.094564] Key type id_resolver registered
[ 0.094577] Key type id_legacy registered
[ 0.094701] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.094725] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.095281] SGI XFS with ACLs, security attributes, quota, no debug enabled
[ 0.144372] NET: Registered PF_ALG protocol family
[ 0.144430] Key type asymmetric registered
[ 0.144452] Asymmetric key parser 'x509' registered
[ 0.144596] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.144877] io scheduler mq-deadline registered
[ 0.144892] io scheduler kyber registered
[ 0.145110] io scheduler bfq registered
[ 0.155749] IPMI message handler: version 39.2
[ 0.169816] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.189478] usbcore: registered new interface driver uas
[ 0.189547] usbcore: registered new interface driver usb-storage
[ 0.189583] usbcore: registered new interface driver ums-alauda
[ 0.189619] usbcore: registered new interface driver ums-cypress
[ 0.189669] usbcore: registered new interface driver ums-datafab
[ 0.189720] usbcore: registered new interface driver ums_eneub6250
[ 0.189759] usbcore: registered new interface driver ums-freecom
[ 0.189794] usbcore: registered new interface driver ums-isd200
[ 0.189831] usbcore: registered new interface driver ums-jumpshot
[ 0.189866] usbcore: registered new interface driver ums-karma
[ 0.189901] usbcore: registered new interface driver ums-onetouch
[ 0.189937] usbcore: registered new interface driver ums-realtek
[ 0.189985] usbcore: registered new interface driver ums-sddr09
[ 0.190024] usbcore: registered new interface driver ums-sddr55
[ 0.190059] usbcore: registered new interface driver ums-usbat
[ 0.190178] usbcore: registered new interface driver usbserial_generic
[ 0.190216] usbserial: USB Serial support registered for generic
[ 0.190995] mousedev: PS/2 mouse device common for all mice
[ 0.192532] sun6i-rtc 7000000.rtc: registered as rtc0
[ 0.192575] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:08 UTC (8)
[ 0.194591] device-mapper: uevent: version 1.0.3
[ 0.194921] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
[ 0.196208] sdhci: Secure Digital Host Controller Interface driver
[ 0.196227] sdhci: Copyright(c) Pierre Ossman
[ 0.196795] Synopsys Designware Multimedia Card Interface Driver
[ 0.197722] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.199721] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.200414] SMCCC: SOC_ID: ID = jep106:091e:1728 Revision = 0x00000001
[ 0.203748] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.204396] watchdog: Delayed init of the lockup detector failed: -19
[ 0.204413] watchdog: Hard watchdog permanently disabled
[ 0.207267] Initializing XFRM netlink socket
[ 0.207997] NET: Registered PF_INET6 protocol family
[ 3.740832] Freeing initrd memory: 9180K
[ 3.791094] Segment Routing with IPv6
[ 3.791201] In-situ OAM (IOAM) with IPv6
[ 3.791300] mip6: Mobile IPv6
[ 3.791332] NET: Registered PF_PACKET protocol family
[ 3.791523] Key type dns_resolver registered
[ 3.804387] registered taskstats version 1
[ 3.804679] Loading compiled-in X.509 certificates
[ 3.817594] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 3.818176] Key type .fscrypt registered
[ 3.818194] Key type fscrypt-provisioning registered
[ 3.819204] Key type encrypted registered
[ 4.322035] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000
[ 4.322199] platform 1100000.mixer: Fixed dependency cycle(s) with /soc/tcon-top@6510000
[ 4.323639] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 4.326259] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
[ 4.328063] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.328342] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 4.328497] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000008002000010
[ 4.328564] xhci-hcd xhci-hcd.1.auto: irq 88, io mem 0x05200000
[ 4.328742] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.328907] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 4.328934] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 4.329137] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 4.329160] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.329179] usb usb1: Product: xHCI Host Controller
[ 4.329193] usb usb1: Manufacturer: Linux 6.6.32-zicai xhci-hcd
[ 4.329207] usb usb1: SerialNumber: xhci-hcd.1.auto
[ 4.329783] hub 1-0:1.0: USB hub found
[ 4.329828] hub 1-0:1.0: 1 port detected
[ 4.330274] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.330427] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 4.330450] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.330468] usb usb2: Product: xHCI Host Controller
[ 4.330482] usb usb2: Manufacturer: Linux 6.6.32-zicai xhci-hcd
[ 4.330496] usb usb2: SerialNumber: xhci-hcd.1.auto
[ 4.330980] hub 2-0:1.0: USB hub found
[ 4.331021] hub 2-0:1.0: 1 port detected
[ 4.334377] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator
[ 4.337295] sunxi-rsb 7083000.rsb: RSB running at 4000000 Hz
[ 4.337737] axp20x-rsb sunxi-rsb-745: AXP20x variant AXP806 found
[ 4.338457] axp20x-rsb sunxi-rsb-745: Failed to set masks in 0x41: -5
[ 4.338478] axp20x-rsb sunxi-rsb-745: failed to add irq chip: -5
[ 4.338493] axp20x-rsb: probe of sunxi-rsb-745 failed with error -5
[ 4.340072] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 4.345646] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
[ 4.346492] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pb not found, using dummy regulator
[ 4.347307] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator
[ 4.347888] printk: console [ttyS0] disabled
[ 4.348346] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 235, base_baud = 1500000) is a 16550A
[ 4.348415] printk: console [ttyS0] enabled
[ 5.904364] 5000400.serial: ttyS1 at MMIO 0x5000400 (irq = 236, base_baud = 1500000) is a 16550A
[ 5.913502] serial serial0: tty port ttyS1 registered
[ 5.927564] ac200-ephy ac200-ephy: DMA mask not set
[ 5.935750] acx00-codec: Failed to locate of_node [id: -1]
[ 5.943290] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
[ 5.943647] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 79
[ 5.944744] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq
[ 5.945024] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 65
[ 5.945032] sun50i-h6-pinctrl 300b000.pinctrl: pin-65 (4022000.mmc) status -517
[ 5.945041] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 65 (PC1) from group PC1 on device 300b000.pinctrl
[ 5.945049] sunxi-mmc 4022000.mmc: Error applying setting, reverse things back
[ 5.996233] sun50i-h6-pinctrl 300b000.pinctrl: pin-79 (300b000.pinctrl:79) status -517
[ 6.004180] sun4i-usb-phy 5100400.phy: Couldn't request ID GPIO
[ 6.013209] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 65
[ 6.013272] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 79
[ 6.013499] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
[ 6.020105] sun50i-h6-pinctrl 300b000.pinctrl: pin-65 (4022000.mmc) status -517
[ 6.020118] sun50i-h6-pinctrl 300b000.pinctrl: pin-79 (300b000.pinctrl:79) status -517
[ 6.020130] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 65 (PC1) from group PC1 on device 300b000.pinctrl
[ 6.020142] sun4i-usb-phy 5100400.phy: Couldn't request ID GPIO
[ 6.020150] sunxi-mmc 4022000.mmc: Error applying setting, reverse things back
[ 6.022276] clk: Disabling unused clocks
[ 6.023160] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 79
[ 6.023169] sun50i-h6-pinctrl 300b000.pinctrl: pin-79 (300b000.pinctrl:79) status -517
[ 6.023178] sun4i-usb-phy 5100400.phy: Couldn't request ID GPIO
[ 6.023418] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
[ 6.027713] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 79
[ 6.035793] ALSA device list:
[ 6.042928] sun50i-h6-pinctrl 300b000.pinctrl: pin-79 (300b000.pinctrl:79) status -517
[ 6.042952] sun4i-usb-phy 5100400.phy: Couldn't request ID GPIO
[ 6.050852] No soundcards found.
[ 6.053221] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
[ 6.053449] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 65
[ 6.053457] sun50i-h6-pinctrl 300b000.pinctrl: pin-65 (4022000.mmc) status -517
[ 6.053466] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 65 (PC1) from group PC1 on device 300b000.pinctrl
[ 6.053474] sunxi-mmc 4022000.mmc: Error applying setting, reverse things back
[ 6.195533] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[ 6.205887] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 79
[ 6.207156] Freeing unused kernel memory: 3840K
[ 6.212797] sun50i-h6-pinctrl 300b000.pinctrl: pin-79 (300b000.pinctrl:79) status -517
[ 6.212898] Run /init as init process
[ 6.217422] sun4i-usb-phy 5100400.phy: Couldn't request ID GPIO
[ 6.227806] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 65
[ 6.228021] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
[ 6.228989] sun50i-h6-pinctrl 300b000.pinctrl: pin-65 (4022000.mmc) status -517
[ 6.234936] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 65 (PC1) from group PC1 on device 300b000.pinctrl
[ 6.250313] sunxi-mmc 4022000.mmc: Error applying setting, reverse things back
[ 6.344787] mmc0: new high speed SDIO card at address 0001

done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
[ 16.474124] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 79
[ 16.481026] sun50i-h6-pinctrl 300b000.pinctrl: pin-79 (300b000.pinctrl:79) status -517
[ 16.488981] sun4i-usb-phy 5100400.phy: Couldn't request ID GPIO
[ 16.497211] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 65
[ 16.497455] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
[ 16.504120] sun50i-h6-pinctrl 300b000.pinctrl: pin-65 (4022000.mmc) status -517
[ 16.512641] platform cpufreq-dt: deferred probe pending
[ 16.519974] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 65 (PC1) from group PC1 on device 300b000.pinctrl
[ 16.519995] platform 5311400.usb: deferred probe pending
[ 16.520011] sunxi-mmc 4022000.mmc: Error applying setting, reverse things back
[ 16.520019] platform 5100400.phy: deferred probe pending
[ 16.553878] platform 5100000.usb: deferred probe pending
[ 16.559193] platform 5101000.usb: deferred probe pending
[ 16.564517] platform 5311000.usb: deferred probe pending
[ 16.569832] platform 5101400.usb: deferred probe pending
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
done.
Gave up waiting for root file system device. Common problems:

• Boot args (cat /proc/cmdline)
  • Check rootdelay= (did the system wait long enough?)
• Missing modules (cat /proc/modules; ls /dev)
  ALERT! UUID=99d23eac-bcb0-4fe0-a794-41dc29690f8d does not exist. Dropping to a shell!

[zongru666]

有没有usb口有反应的，有的话买个usb转网口，再插网线就可以用了

[lrhwind]

最新版本连系统都起不来啊，而且，就是不想插usb网卡，就是直接一个设备+电源丢在一个小角落

[zongru666]

最新版本连系统都起不来啊，而且，就是不想插usb网卡，就是直接一个设备+电源丢在一个小角落

这样的话可以试下插一个无线网卡，免驱那种，再连WiFi，但我没试过