devn-atmel.use

%C Driver for ATMEL WLAN compatible WiFi controllers

Syntax:
  io-net -d atmel [option[,option ...]] ... &

Options (to override autodetected defaults):
  verbose             Be verbose. 
  promiscuous         Enable promiscuous mode.
  nomulticast         Disable multicast support.
	ssid=name						Set the SSID (network name) to connect/create
	channel=num					802.11 channel to use.  Scans in normal mode.
	rts_thresh=num			Set the RTS threshold.  Should be the same as the
											access point or the other cards being used in the network.
	opmode=num					Operating mode, 0=AD_HOC,1=Infrastructure(AP),2=Auto
	default_key=[1-4]		Which of the keys given by key[1-4] to use for WEP.			
	key[1-4]=KEY				Setup one of the 4 default WEP keys. (If you setup no key, WEP will be disabled.) 
											Where KEY can either be a Hexadeciamal string (start string with 0x) or ASCII. 5 or 13 ascii or 10/26 Hex.
											For example, key1=0x0102030405.
	wepmode=[0,1]				If WEP is mandatory(1) or optional(0)
	authtype=[0,1]			Open System(0), Shared Key(1)
	preambletype=[0-2]	Long Preamble(0),Short Preamble(1), Auto Preamble(2)
	pwrmgmtmode=[0,1]		Normal mode(0), Power save(1)
	beaconperiod=num		XXX...
	irq=num							This option is REQUIRED.
	ioport=num					This option is REQUIRED.

Examples:
  # Start io-net using the ATMEL WLAN driver and the full TCP/IP stack: 
  io-net -d atmel irq=X,ioport=0xXXX -p tcpip
  ifconfig en0 10.184