diff --git a/keyboards/abacus/config.h b/keyboards/abacus/config.h
index 2e28b792a1d7..e579dea057f9 100644
--- a/keyboards/abacus/config.h
+++ b/keyboards/abacus/config.h
@@ -17,24 +17,8 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D3, D2, D4, C6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, D7, B3, E6, B2, B4, B6, B5}
-
#define DIP_SWITCH_PINS { D0 }
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
#define RGB_DI_PIN D1
#ifdef RGB_DI_PIN
diff --git a/keyboards/abacus/info.json b/keyboards/abacus/info.json
index d14c59f8a2a8..b2fd151cec19 100644
--- a/keyboards/abacus/info.json
+++ b/keyboards/abacus/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "D7", "B3", "E6", "B2", "B4", "B6", "B5"],
+ "rows": ["D3", "D2", "D4", "C6"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "F1", "pin_b": "F0"}
diff --git a/keyboards/abstract/ellipse/rev1/config.h b/keyboards/abstract/ellipse/rev1/config.h
index f7932863e9a2..d3feabbe2007 100644
--- a/keyboards/abstract/ellipse/rev1/config.h
+++ b/keyboards/abstract/ellipse/rev1/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D3, C7 }
-#define MATRIX_COL_PINS { F0, B6, B5 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN E6
#ifdef RGB_DI_PIN
#define RGBLED_NUM 3
diff --git a/keyboards/abstract/ellipse/rev1/info.json b/keyboards/abstract/ellipse/rev1/info.json
index 230e286c5da2..693faa86b520 100644
--- a/keyboards/abstract/ellipse/rev1/info.json
+++ b/keyboards/abstract/ellipse/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "B6", "B5"],
+ "rows": ["D3", "C7"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B2", "pin_b": "B1", "resolution": 2},
diff --git a/keyboards/acekeyboard/titan60/config.h b/keyboards/acekeyboard/titan60/config.h
index 07378f5e3d96..3a01bebf93fa 100644
--- a/keyboards/acekeyboard/titan60/config.h
+++ b/keyboards/acekeyboard/titan60/config.h
@@ -17,26 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-
-// 0 1 2 3 4 5 6 7 8 9 A B C D
-#define MATRIX_ROW_PINS { B1, B2, B3, F0, F1 }
-#define MATRIX_COL_PINS { F4, F7, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3}
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D0
#ifdef RGB_DI_PIN
# define RGBLED_NUM 6
diff --git a/keyboards/acekeyboard/titan60/info.json b/keyboards/acekeyboard/titan60/info.json
index 00629035c013..00399db84146 100644
--- a/keyboards/acekeyboard/titan60/info.json
+++ b/keyboards/acekeyboard/titan60/info.json
@@ -8,6 +8,11 @@
"pid": "0x5449",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F7", "F5", "F6", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3"],
+ "rows": ["B1", "B2", "B3", "F0", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"breathing": true
diff --git a/keyboards/acheron/apollo/87h/delta/config.h b/keyboards/acheron/apollo/87h/delta/config.h
index 490c13c2e979..377801604d63 100644
--- a/keyboards/acheron/apollo/87h/delta/config.h
+++ b/keyboards/acheron/apollo/87h/delta/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-// C0 , C1 , C2 , C3 , C4 , C5 , C6 , C7 , C8 , C9 , C10, C11, C12, C13, C14, C15, C16 }
-#define MATRIX_COL_PINS { C8 , C9 , A8 , A10, C7 , C6 , B14, B12, B10, B1 , C5 , C4 , A7 , B0 , C11, A3 , B4 }
-// R0 , R1 , R2 , R3 , R4 , R5
-#define MATRIX_ROW_PINS { B3 , D2 , C12, A6 , A5 , A4 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/acheron/apollo/87h/delta/info.json b/keyboards/acheron/apollo/87h/delta/info.json
index 4e14f51df032..0ad176f4516d 100644
--- a/keyboards/acheron/apollo/87h/delta/info.json
+++ b/keyboards/acheron/apollo/87h/delta/info.json
@@ -4,6 +4,11 @@
"pid": "0x8775",
"device_version": "0.0.4"
},
+ "matrix_pins": {
+ "cols": ["C8", "C9", "A8", "A10", "C7", "C6", "B14", "B12", "B10", "B1", "C5", "C4", "A7", "B0", "C11", "A3", "B4"],
+ "rows": ["B3", "D2", "C12", "A6", "A5", "A4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F401",
"bootloader": "stm32-dfu"
}
diff --git a/keyboards/acheron/apollo/87h/gamma/config.h b/keyboards/acheron/apollo/87h/gamma/config.h
index 07da517e24b1..6209fa21f728 100644
--- a/keyboards/acheron/apollo/87h/gamma/config.h
+++ b/keyboards/acheron/apollo/87h/gamma/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-// C0 , C1 , C2 , C3 , C4 , C5 , C6 , C7 , C8 , C9 , C10, C11, C12, C13, C14, C15 }
-#define MATRIX_COL_PINS { B3 , A15, A10, A8 , B14, B12, B10, B1 , B0 , A7 , A4 , A5 , A6 , C15, A0 , A1 }
-// R0 , R1 , R2 , R3 , R4 , R5
-#define MATRIX_ROW_PINS { C14, C13, B9 , B4 , A3 , A2 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/acheron/apollo/87h/gamma/info.json b/keyboards/acheron/apollo/87h/gamma/info.json
index 4a93afd70c20..424f64405dd1 100644
--- a/keyboards/acheron/apollo/87h/gamma/info.json
+++ b/keyboards/acheron/apollo/87h/gamma/info.json
@@ -4,6 +4,11 @@
"pid": "0x8774",
"device_version": "0.0.3"
},
+ "matrix_pins": {
+ "cols": ["B3", "A15", "A10", "A8", "B14", "B12", "B10", "B1", "B0", "A7", "A4", "A5", "A6", "C15", "A0", "A1"],
+ "rows": ["C14", "C13", "B9", "B4", "A3", "A2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F411",
"bootloader": "stm32-dfu"
}
diff --git a/keyboards/acheron/apollo/87htsc/config.h b/keyboards/acheron/apollo/87htsc/config.h
index 8b61b285fd5a..7447e1dd298a 100644
--- a/keyboards/acheron/apollo/87htsc/config.h
+++ b/keyboards/acheron/apollo/87htsc/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-// C0 , C1 , C2 , C3 , C4 , C5 , C6 , C7 , C8 , C9 , C10, C11, C12, C13, C14, C15, C16 }
-#define MATRIX_COL_PINS { C8 , C9 , A8 , A10, C7 , C6 , B14, B12, B10, B1 , C5 , C4 , A7 , B0 , C11, A3 , B4 }
-// R0 , R1 , R2 , R3 , R4 , R5
-#define MATRIX_ROW_PINS { B3 , D2 , C12, A6 , A5 , A4 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/acheron/apollo/87htsc/info.json b/keyboards/acheron/apollo/87htsc/info.json
index 68fc1b018a12..36897ff86e55 100644
--- a/keyboards/acheron/apollo/87htsc/info.json
+++ b/keyboards/acheron/apollo/87htsc/info.json
@@ -8,6 +8,11 @@
"pid": "0x8776",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C8", "C9", "A8", "A10", "C7", "C6", "B14", "B12", "B10", "B1", "C5", "C4", "A7", "B0", "C11", "A3", "B4"],
+ "rows": ["B3", "D2", "C12", "A6", "A5", "A4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F401",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/acheron/apollo/88htsc/config.h b/keyboards/acheron/apollo/88htsc/config.h
index 490c13c2e979..377801604d63 100644
--- a/keyboards/acheron/apollo/88htsc/config.h
+++ b/keyboards/acheron/apollo/88htsc/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-// C0 , C1 , C2 , C3 , C4 , C5 , C6 , C7 , C8 , C9 , C10, C11, C12, C13, C14, C15, C16 }
-#define MATRIX_COL_PINS { C8 , C9 , A8 , A10, C7 , C6 , B14, B12, B10, B1 , C5 , C4 , A7 , B0 , C11, A3 , B4 }
-// R0 , R1 , R2 , R3 , R4 , R5
-#define MATRIX_ROW_PINS { B3 , D2 , C12, A6 , A5 , A4 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/acheron/apollo/88htsc/info.json b/keyboards/acheron/apollo/88htsc/info.json
index 92dd80182686..3a7e0f7e5a61 100644
--- a/keyboards/acheron/apollo/88htsc/info.json
+++ b/keyboards/acheron/apollo/88htsc/info.json
@@ -8,6 +8,11 @@
"pid": "0x8873",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C8", "C9", "A8", "A10", "C7", "C6", "B14", "B12", "B10", "B1", "C5", "C4", "A7", "B0", "C11", "A3", "B4"],
+ "rows": ["B3", "D2", "C12", "A6", "A5", "A4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F401",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/acheron/arctic/config.h b/keyboards/acheron/arctic/config.h
index 0187e823fca4..f608132b5afd 100644
--- a/keyboards/acheron/arctic/config.h
+++ b/keyboards/acheron/arctic/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see .
#pragma once
-#define MATRIX_COL_PINS { B0, A5, A4, A3, A2, A1, A0, F1, F0, C15, C14, C13, B9, B8}
-#define MATRIX_ROW_PINS { B7, B6, A6, A7, B1}
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/acheron/arctic/info.json b/keyboards/acheron/arctic/info.json
index 42a7bb7b42b1..f51a4c383e23 100644
--- a/keyboards/acheron/arctic/info.json
+++ b/keyboards/acheron/arctic/info.json
@@ -8,6 +8,11 @@
"pid": "0x4152",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "A5", "A4", "A3", "A2", "A1", "A0", "F1", "F0", "C15", "C14", "C13", "B9", "B8"],
+ "rows": ["B7", "B6", "A6", "A7", "B1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/acheron/athena/alpha/config.h b/keyboards/acheron/athena/alpha/config.h
index e99fb833281f..fba5b051ccf5 100644
--- a/keyboards/acheron/athena/alpha/config.h
+++ b/keyboards/acheron/athena/alpha/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_COL_PINS { A8 , B14, B12, B10, B1 , B0 , A5 , A4 , A3 , A2 , A1 , A0 , C15, A7 , B4 , B3 , A15 }
-#define MATRIX_ROW_PINS { B9 , C13, B8 , B5 , A14 , C14 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/acheron/athena/alpha/info.json b/keyboards/acheron/athena/alpha/info.json
index 2ebf2da8de23..a59bf20ff91f 100644
--- a/keyboards/acheron/athena/alpha/info.json
+++ b/keyboards/acheron/athena/alpha/info.json
@@ -4,6 +4,11 @@
"pid": "0x6584",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A8", "B14", "B12", "B10", "B1", "B0", "A5", "A4", "A3", "A2", "A1", "A0", "C15", "A7", "B4", "B3", "A15"],
+ "rows": ["B9", "C13", "B8", "B5", "A14", "C14"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 20,
diff --git a/keyboards/acheron/athena/beta/config.h b/keyboards/acheron/athena/beta/config.h
index 7fbc624522da..dc5f35487648 100644
--- a/keyboards/acheron/athena/beta/config.h
+++ b/keyboards/acheron/athena/beta/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_COL_PINS { C7 , C6 , B14, B12, B10, B1 , C4 , A7 , A6 , A5 , A4 , A3 , A2 , C5 , A10, A8 , C9 }
-#define MATRIX_ROW_PINS { C11, C12, C10, A15, C0 , A1 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/acheron/athena/beta/info.json b/keyboards/acheron/athena/beta/info.json
index dd8e766f90d8..a303c5a25c30 100644
--- a/keyboards/acheron/athena/beta/info.json
+++ b/keyboards/acheron/athena/beta/info.json
@@ -4,6 +4,11 @@
"pid": "0x6585",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["C7", "C6", "B14", "B12", "B10", "B1", "C4", "A7", "A6", "A5", "A4", "A3", "A2", "C5", "A10", "A8", "C9"],
+ "rows": ["C11", "C12", "C10", "A15", "C0", "A1"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B0",
"levels": 20,
diff --git a/keyboards/acheron/austin/config.h b/keyboards/acheron/austin/config.h
index ce12edfd33f7..a47b76953a28 100644
--- a/keyboards/acheron/austin/config.h
+++ b/keyboards/acheron/austin/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see .
#pragma once
-#define MATRIX_COL_PINS { B10, B11, B12, B13, B14, B15, A8, A9, A10, A5, A15, B3, B4, B5, B8, A3, C15, C14, F1 }
-#define MATRIX_ROW_PINS { C13, A4, A7, B0, B1, B2 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/acheron/austin/info.json b/keyboards/acheron/austin/info.json
index dad488df8f32..0cc16067e532 100755
--- a/keyboards/acheron/austin/info.json
+++ b/keyboards/acheron/austin/info.json
@@ -8,6 +8,11 @@
"pid": "0x4175",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B10", "B11", "B12", "B13", "B14", "B15", "A8", "A9", "A10", "A5", "A15", "B3", "B4", "B5", "B8", "A3", "C15", "C14", "F1"],
+ "rows": ["C13", "A4", "A7", "B0", "B1", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/acheron/elongate/beta/config.h b/keyboards/acheron/elongate/beta/config.h
index a3b19e7fe6ab..30b0b74c95fb 100644
--- a/keyboards/acheron/elongate/beta/config.h
+++ b/keyboards/acheron/elongate/beta/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D3, B7, D5, B5, D6 }
-#define MATRIX_COL_PINS { F5, F6, F4, F1, F0, B2, B1, C6, B0, B3, E6, D4, B4}
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D7
#ifdef RGB_DI_PIN
#define RGBLED_NUM 16
diff --git a/keyboards/acheron/elongate/beta/info.json b/keyboards/acheron/elongate/beta/info.json
index 1f625bca831b..e373bb665448 100644
--- a/keyboards/acheron/elongate/beta/info.json
+++ b/keyboards/acheron/elongate/beta/info.json
@@ -8,6 +8,11 @@
"pid": "0x454C",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "F6", "F4", "F1", "F0", "B2", "B1", "C6", "B0", "B3", "E6", "D4", "B4"],
+ "rows": ["D3", "B7", "D5", "B5", "D6"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "D1",
"num_lock": "D2",
diff --git a/keyboards/acheron/elongate/delta/config.h b/keyboards/acheron/elongate/delta/config.h
index 0ceba3610029..60362ab06576 100755
--- a/keyboards/acheron/elongate/delta/config.h
+++ b/keyboards/acheron/elongate/delta/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_COL_PINS { A10, A9, A8, B14, B12, B11, B10, B2, B1, A7, A5, B9, B8, B7, B6 }
-#define MATRIX_ROW_PINS { B3, A15, B0, B4, B5 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/acheron/elongate/delta/info.json b/keyboards/acheron/elongate/delta/info.json
index f5f87333eb34..5341ab654e0b 100644
--- a/keyboards/acheron/elongate/delta/info.json
+++ b/keyboards/acheron/elongate/delta/info.json
@@ -8,6 +8,11 @@
"pid": "0x454D",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["A10", "A9", "A8", "B14", "B12", "B11", "B10", "B2", "B1", "A7", "A5", "B9", "B8", "B7", "B6"],
+ "rows": ["B3", "A15", "B0", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 20,
diff --git a/keyboards/acheron/keebspcb/config.h b/keyboards/acheron/keebspcb/config.h
index 1a8eab8b808a..4b007cf387ee 100644
--- a/keyboards/acheron/keebspcb/config.h
+++ b/keyboards/acheron/keebspcb/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see .
#pragma once
-#define MATRIX_COL_PINS { B12, A1, A0, F1, F0, C15, C14, C13, B9, B8, B7, B6, B5}
-#define MATRIX_ROW_PINS { B4, B3, A2, A3, A4}
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/acheron/keebspcb/info.json b/keyboards/acheron/keebspcb/info.json
index 9c96a0119188..5c53bc70e2e7 100644
--- a/keyboards/acheron/keebspcb/info.json
+++ b/keyboards/acheron/keebspcb/info.json
@@ -8,6 +8,11 @@
"pid": "0x4B45",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B12", "A1", "A0", "F1", "F0", "C15", "C14", "C13", "B9", "B8", "B7", "B6", "B5"],
+ "rows": ["B4", "B3", "A2", "A3", "A4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"community_layouts": ["60_ansi_tsangan"],
diff --git a/keyboards/acheron/lasgweloth/config.h b/keyboards/acheron/lasgweloth/config.h
index e41924d0c6a1..f608132b5afd 100644
--- a/keyboards/acheron/lasgweloth/config.h
+++ b/keyboards/acheron/lasgweloth/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see .
#pragma once
-#define MATRIX_COL_PINS { B12, A2 , A1 , A0 , F1 , F0 , C15, C14, C13, A7 , A6 , A5 , A4 , B7}
-#define MATRIX_ROW_PINS { B9 , B8 , A3 , B0 , B1 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/acheron/lasgweloth/info.json b/keyboards/acheron/lasgweloth/info.json
index b97521e48eec..47d4b5510577 100644
--- a/keyboards/acheron/lasgweloth/info.json
+++ b/keyboards/acheron/lasgweloth/info.json
@@ -8,6 +8,11 @@
"pid": "0x7641",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B12", "A2", "A1", "A0", "F1", "F0", "C15", "C14", "C13", "A7", "A6", "A5", "A4", "B7"],
+ "rows": ["B9", "B8", "A3", "B0", "B1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"community_layouts": ["60_ansi", "60_ansi_split_bs_rshift"],
diff --git a/keyboards/acheron/shark/alpha/config.h b/keyboards/acheron/shark/alpha/config.h
index 9c36ac3a1f61..91f51146f0b4 100644
--- a/keyboards/acheron/shark/alpha/config.h
+++ b/keyboards/acheron/shark/alpha/config.h
@@ -17,28 +17,6 @@ along with this program. If not, see .
#pragma once
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS {B4, A15, B10, B2}
-#define MATRIX_COL_PINS {B1, B12, A1, A7, A5, A4, A3, A2, A0, C15, C14, C13}
-//{C13, C14, C15, A0,A2,A3,A4,A5,A6, A1,B12,B1}
-/* Unused pins, in the default layout, are:
-EncA (B6) because it is not used in the default PCB
-All Extra pins (A8, B15, B14, B13, B3, B5, B8, B9) , for the same reason;
-B0, which is unconnected on the PCB
-*/
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 3
diff --git a/keyboards/acheron/shark/alpha/info.json b/keyboards/acheron/shark/alpha/info.json
index d6b5dfcd0f60..07c6550cb837 100644
--- a/keyboards/acheron/shark/alpha/info.json
+++ b/keyboards/acheron/shark/alpha/info.json
@@ -6,6 +6,11 @@
"pid": "0x5368",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B1", "B12", "A1", "A7", "A5", "A4", "A3", "A2", "A0", "C15", "C14", "C13"],
+ "rows": ["B4", "A15", "B10", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B6", "pin_b": "B7"}
diff --git a/keyboards/acheron/shark/beta/config.h b/keyboards/acheron/shark/beta/config.h
index 8cfc57b9d587..9a08dd123458 100644
--- a/keyboards/acheron/shark/beta/config.h
+++ b/keyboards/acheron/shark/beta/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_COL_PINS { A5 , A10, C13, B9 , B8 , B5 , B4 , B3 , A15, A0 , A1 , A2 }
-#define MATRIX_ROW_PINS { A8 , B14, A4 , A3 }
-#define DIODE_DIRECTION COL2ROW
-
#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/acheron/shark/beta/info.json b/keyboards/acheron/shark/beta/info.json
index 73025df6c4b0..313e877c8eca 100644
--- a/keyboards/acheron/shark/beta/info.json
+++ b/keyboards/acheron/shark/beta/info.json
@@ -4,6 +4,11 @@
"pid": "0x5369",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["A5", "A10", "C13", "B9", "B8", "B5", "B4", "B3", "A15", "A0", "A1", "A2"],
+ "rows": ["A8", "B14", "A4", "A3"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "C15", "pin_b": "C14"}
diff --git a/keyboards/ada/ada1800mini/config.h b/keyboards/ada/ada1800mini/config.h
index 54da0bdad4f2..378ffa80b439 100644
--- a/keyboards/ada/ada1800mini/config.h
+++ b/keyboards/ada/ada1800mini/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, B3, B2, B1 }
-
-#define DIODE_DIRECTION COL2ROW
-
-
//TODO: implement RGB matrix when I get the hardware
#define RGB_DI_PIN F0
#ifdef RGB_DI_PIN
diff --git a/keyboards/ada/ada1800mini/info.json b/keyboards/ada/ada1800mini/info.json
index e3f97c6706a5..fdc7df02df78 100644
--- a/keyboards/ada/ada1800mini/info.json
+++ b/keyboards/ada/ada1800mini/info.json
@@ -8,6 +8,11 @@
"pid": "0x1800",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "B3", "B2", "B1"],
+ "rows": ["D0", "D1", "D2", "D3", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/ada/infinity81/config.h b/keyboards/ada/infinity81/config.h
index d8fc5bf2263a..0d64933ad9ba 100644
--- a/keyboards/ada/infinity81/config.h
+++ b/keyboards/ada/infinity81/config.h
@@ -3,23 +3,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B3, B2, B1, B0, F6, B7 }
-#define MATRIX_COL_PINS { D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F5, F1, F4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D0
#ifdef RGB_DI_PIN
# define RGBLED_NUM 107
diff --git a/keyboards/ada/infinity81/info.json b/keyboards/ada/infinity81/info.json
index 5c32cd06394d..6f4a6ac99633 100644
--- a/keyboards/ada/infinity81/info.json
+++ b/keyboards/ada/infinity81/info.json
@@ -8,6 +8,11 @@
"pid": "0x0081",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F5", "F1", "F4"],
+ "rows": ["B3", "B2", "B1", "B0", "F6", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/adelheid/config.h b/keyboards/adelheid/config.h
index e22e250f85be..db23a5311997 100644
--- a/keyboards/adelheid/config.h
+++ b/keyboards/adelheid/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, F4, D1, D2, D3, D5, F7 }
-#define MATRIX_COL_PINS { F0, F1, E6, C7, F6, B6, D4, B1, B0, B7, B5, B4, D7, D6, B3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/adelheid/info.json b/keyboards/adelheid/info.json
index 19970b27cf9a..c323d62a7503 100644
--- a/keyboards/adelheid/info.json
+++ b/keyboards/adelheid/info.json
@@ -8,6 +8,11 @@
"pid": "0xAD78",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "E6", "C7", "F6", "B6", "D4", "B1", "B0", "B7", "B5", "B4", "D7", "D6", "B3"],
+ "rows": ["D0", "F4", "D1", "D2", "D3", "D5", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "C6"
},
diff --git a/keyboards/adkb96/info.json b/keyboards/adkb96/info.json
index e86480d7d7d9..1a9a95cec396 100644
--- a/keyboards/adkb96/info.json
+++ b/keyboards/adkb96/info.json
@@ -8,6 +8,11 @@
"pid": "0xAD96",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+ "rows": ["D4", "C6", "D7", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/adkb96/rev1/config.h b/keyboards/adkb96/rev1/config.h
index c5a96736718f..89de3d9a643a 100644
--- a/keyboards/adkb96/rev1/config.h
+++ b/keyboards/adkb96/rev1/config.h
@@ -18,12 +18,6 @@ along with this program. If not, see .
#pragma once
-// wiring of each half
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* define tapping term */
#define TAPPING_TERM 100
diff --git a/keyboards/adm42/config.h b/keyboards/adm42/config.h
index 03749906e8ff..af23da4c6628 100644
--- a/keyboards/adm42/config.h
+++ b/keyboards/adm42/config.h
@@ -16,9 +16,6 @@
#pragma once
-
-#define DIODE_DIRECTION ROW2COL
-
#define TAP_CODE_DELAY 1
#if defined(CONSOLE_ENABLE)
diff --git a/keyboards/adm42/info.json b/keyboards/adm42/info.json
index 3596cdb446d7..5d518c3b86a3 100644
--- a/keyboards/adm42/info.json
+++ b/keyboards/adm42/info.json
@@ -9,6 +9,11 @@
"pid": "0xE873",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "B6", "B5", "B4", "D7", "D6", "F0", "F1", "F4", "F5", "F6", "F7"],
+ "rows": ["C7", "D5", "D3", "D2"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/adm42/rev4/config.h b/keyboards/adm42/rev4/config.h
index fa2bcb3e43d2..73a212910a47 100644
--- a/keyboards/adm42/rev4/config.h
+++ b/keyboards/adm42/rev4/config.h
@@ -16,9 +16,6 @@
#pragma once
-#define MATRIX_COL_PINS { C6, B6, B5, B4, D7, D6, F0, F1, F4, F5, F6, F7 }
-#define MATRIX_ROW_PINS { C7, D5, D3, D2 }
-
#define ADM42_LED E6
#define RGB_DI_PIN B7
diff --git a/keyboards/adpenrose/akemipad/config.h b/keyboards/adpenrose/akemipad/config.h
index 47fcf429ac87..9743566d12ee 100644
--- a/keyboards/adpenrose/akemipad/config.h
+++ b/keyboards/adpenrose/akemipad/config.h
@@ -3,23 +3,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D4, D7, E6, B6, B4, B5 }
-#define MATRIX_COL_PINS { D3, D2, F5, F6, B2 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define TAP_CODE_DELAY 10
/* Audio functionality */
diff --git a/keyboards/adpenrose/akemipad/info.json b/keyboards/adpenrose/akemipad/info.json
index 9b5a8d6ef6ad..80085f949e18 100644
--- a/keyboards/adpenrose/akemipad/info.json
+++ b/keyboards/adpenrose/akemipad/info.json
@@ -7,6 +7,11 @@
"pid": "0x0004",
"vid": "0x4450"
},
+ "matrix_pins": {
+ "cols": ["D3", "D2", "F5", "F6", "B2"],
+ "rows": ["D4", "D7", "E6", "B6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B1", "pin_b": "B3"}
diff --git a/keyboards/adpenrose/kintsugi/config.h b/keyboards/adpenrose/kintsugi/config.h
index 5ffeb868374c..0e10856cc815 100644
--- a/keyboards/adpenrose/kintsugi/config.h
+++ b/keyboards/adpenrose/kintsugi/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B0, E6, D7, C6, D4, D2, F4, F5, B5, B4 }
-#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6, F0 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define TAP_CODE_DELAY 10
/* Underglow options: */
diff --git a/keyboards/adpenrose/kintsugi/info.json b/keyboards/adpenrose/kintsugi/info.json
index a26c65b42a86..efe7d069d008 100644
--- a/keyboards/adpenrose/kintsugi/info.json
+++ b/keyboards/adpenrose/kintsugi/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "1.0.0"
},
+ "matrix_pins": {
+ "cols": ["F6", "F7", "B1", "B3", "B2", "B6", "F0"],
+ "rows": ["B0", "E6", "D7", "C6", "D4", "D2", "F4", "F5", "B5", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B7", "pin_b": "D5"}
diff --git a/keyboards/adpenrose/obi/config.h b/keyboards/adpenrose/obi/config.h
index c9f606999e19..fd9156ca82f0 100644
--- a/keyboards/adpenrose/obi/config.h
+++ b/keyboards/adpenrose/obi/config.h
@@ -3,23 +3,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, F5, C7, C6 }
-#define MATRIX_COL_PINS { F6, B7, B6, B4, B5, D6, D5, D3, D7, D4, D2, D1, D0, B0 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define TAP_CODE_DELAY 10
/* Underglow options: */
diff --git a/keyboards/adpenrose/obi/info.json b/keyboards/adpenrose/obi/info.json
index c0c1b73c6448..6417bf57ca33 100644
--- a/keyboards/adpenrose/obi/info.json
+++ b/keyboards/adpenrose/obi/info.json
@@ -7,6 +7,11 @@
"pid": "0x0002",
"vid": "0x4450"
},
+ "matrix_pins": {
+ "cols": ["F6", "B7", "B6", "B4", "B5", "D6", "D5", "D3", "D7", "D4", "D2", "D1", "D0", "B0"],
+ "rows": ["F4", "F5", "C7", "C6"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "F1", "pin_b": "F0"}
diff --git a/keyboards/adpenrose/shisaku/config.h b/keyboards/adpenrose/shisaku/config.h
index 47555b5190fd..9113167572fd 100644
--- a/keyboards/adpenrose/shisaku/config.h
+++ b/keyboards/adpenrose/shisaku/config.h
@@ -3,22 +3,5 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B2, B0, B1, D0, B4, D6, B3, D7 }
-#define MATRIX_COL_PINS { D1, C3, C4, D4, C0, C1, C2 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Solenoid pin */
#define SOLENOID_PIN C5
diff --git a/keyboards/adpenrose/shisaku/info.json b/keyboards/adpenrose/shisaku/info.json
index dd1aaf540a21..9223f5a10166 100644
--- a/keyboards/adpenrose/shisaku/info.json
+++ b/keyboards/adpenrose/shisaku/info.json
@@ -8,6 +8,11 @@
"pid": "0x0003",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "C3", "C4", "D4", "C0", "C1", "C2"],
+ "rows": ["B2", "B0", "B1", "D0", "B4", "D6", "B3", "D7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega328p",
"bootloader": "usbasploader",
"layouts": {
diff --git a/keyboards/aeboards/aegis/config.h b/keyboards/aeboards/aegis/config.h
index edaef2f7b954..8606067a4cf7 100644
--- a/keyboards/aeboards/aegis/config.h
+++ b/keyboards/aeboards/aegis/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F5, F6, E6, F7, D1, D0, D6, D4, B4, D7, B6, B5 }
-#define MATRIX_COL_PINS { C7, C6, B7, D2, D3, B3, B2, B1, B0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/aeboards/aegis/info.json b/keyboards/aeboards/aegis/info.json
index b3817db45241..63b9ea551e48 100644
--- a/keyboards/aeboards/aegis/info.json
+++ b/keyboards/aeboards/aegis/info.json
@@ -8,6 +8,11 @@
"pid": "0x0807",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "C6", "B7", "D2", "D3", "B3", "B2", "B1", "B0"],
+ "rows": ["F5", "F6", "E6", "F7", "D1", "D0", "D6", "D4", "B4", "D7", "B6", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/aeboards/constellation/rev1/config.h b/keyboards/aeboards/constellation/rev1/config.h
index 83eb6e90d39a..01155887a5eb 100755
--- a/keyboards/aeboards/constellation/rev1/config.h
+++ b/keyboards/aeboards/constellation/rev1/config.h
@@ -17,14 +17,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B0, B1, F0, F1, F4 }
-#define MATRIX_COL_PINS { E6, D5, B2, B3, D3, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/aeboards/constellation/rev1/info.json b/keyboards/aeboards/constellation/rev1/info.json
index 6f82ab71f5e5..aec20e5829e0 100644
--- a/keyboards/aeboards/constellation/rev1/info.json
+++ b/keyboards/aeboards/constellation/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x065C",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "D5", "B2", "B3", "D3", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["B0", "B1", "F0", "F1", "F4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/aeboards/constellation/rev2/config.h b/keyboards/aeboards/constellation/rev2/config.h
index faaedf495da4..f4b7be6bdf7f 100755
--- a/keyboards/aeboards/constellation/rev2/config.h
+++ b/keyboards/aeboards/constellation/rev2/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B15, A14, A2, B13, B14 }
-#define MATRIX_COL_PINS { B12, A1, H0, C15, C14, B11, B10, B2, B1, B0, A7, A6, A5, A4, A3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/aeboards/constellation/rev2/info.json b/keyboards/aeboards/constellation/rev2/info.json
index 1009cca20dd5..ac79c2e3368a 100644
--- a/keyboards/aeboards/constellation/rev2/info.json
+++ b/keyboards/aeboards/constellation/rev2/info.json
@@ -8,6 +8,11 @@
"pid": "0x065C",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B12", "A1", "H0", "C15", "C14", "B11", "B10", "B2", "B1", "B0", "A7", "A6", "A5", "A4", "A3"],
+ "rows": ["B15", "A14", "A2", "B13", "B14"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32L422",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/aeboards/constellation/rev3/config.h b/keyboards/aeboards/constellation/rev3/config.h
index 83eb6e90d39a..01155887a5eb 100755
--- a/keyboards/aeboards/constellation/rev3/config.h
+++ b/keyboards/aeboards/constellation/rev3/config.h
@@ -17,14 +17,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B0, B1, F0, F1, F4 }
-#define MATRIX_COL_PINS { E6, D5, B2, B3, D3, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/aeboards/constellation/rev3/info.json b/keyboards/aeboards/constellation/rev3/info.json
index 514fcb778ea1..b50c8893e151 100644
--- a/keyboards/aeboards/constellation/rev3/info.json
+++ b/keyboards/aeboards/constellation/rev3/info.json
@@ -8,6 +8,11 @@
"pid": "0x065D",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "D5", "B2", "B3", "D3", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["B0", "B1", "F0", "F1", "F4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/afternoonlabs/breeze/rev0/config.h b/keyboards/afternoonlabs/breeze/rev0/config.h
index be38eaf0ab4e..3500564544bd 100644
--- a/keyboards/afternoonlabs/breeze/rev0/config.h
+++ b/keyboards/afternoonlabs/breeze/rev0/config.h
@@ -16,12 +16,4 @@
#pragma once
-// wiring of each half
-#define MATRIX_ROW_PINS \
- { F4, F5, F6, F7, B1 }
-#define MATRIX_COL_PINS \
- { B2, D1, D0, D4, C6, D7, E6, B4, B5 }
-
#define SPLIT_HAND_PIN B3
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/afternoonlabs/breeze/rev0/info.json b/keyboards/afternoonlabs/breeze/rev0/info.json
index 19e22b834273..5d3ebbe5cad8 100644
--- a/keyboards/afternoonlabs/breeze/rev0/info.json
+++ b/keyboards/afternoonlabs/breeze/rev0/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.0"
},
+ "matrix_pins": {
+ "cols": ["B2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F4", "F5", "F6", "F7", "B1"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D2"
},
diff --git a/keyboards/afternoonlabs/breeze/rev1/config.h b/keyboards/afternoonlabs/breeze/rev1/config.h
index 1e51a357b2c5..d6bb6df14ce9 100644
--- a/keyboards/afternoonlabs/breeze/rev1/config.h
+++ b/keyboards/afternoonlabs/breeze/rev1/config.h
@@ -16,12 +16,4 @@
#pragma once
-// wiring of each half
-#define MATRIX_ROW_PINS \
- { F4, F5, F6, F7, B1 }
-#define MATRIX_COL_PINS \
- { B2, D1, D0, D4, C6, D7, E6, B4, B5 }
-
#define SPLIT_HAND_PIN B3
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/afternoonlabs/breeze/rev1/info.json b/keyboards/afternoonlabs/breeze/rev1/info.json
index 4feeeca8755d..191c3ffc63ab 100644
--- a/keyboards/afternoonlabs/breeze/rev1/info.json
+++ b/keyboards/afternoonlabs/breeze/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F4", "F5", "F6", "F7", "B1"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D2"
},
diff --git a/keyboards/afternoonlabs/gust/rev1/config.h b/keyboards/afternoonlabs/gust/rev1/config.h
deleted file mode 100644
index db2839cfc948..000000000000
--- a/keyboards/afternoonlabs/gust/rev1/config.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* Copyright 2021 eithanshavit
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-
-#pragma once
-
-// wiring of each half
-#define MATRIX_ROW_PINS { F5, F4, D0 }
-#define MATRIX_COL_PINS { D1, D2, D3 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/afternoonlabs/gust/rev1/info.json b/keyboards/afternoonlabs/gust/rev1/info.json
index a07fab20e299..e031108f5119 100644
--- a/keyboards/afternoonlabs/gust/rev1/info.json
+++ b/keyboards/afternoonlabs/gust/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0002",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "D2", "D3"],
+ "rows": ["F5", "F4", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/afternoonlabs/oceanbreeze/rev1/config.h b/keyboards/afternoonlabs/oceanbreeze/rev1/config.h
index 42621b39ef34..d6bb6df14ce9 100644
--- a/keyboards/afternoonlabs/oceanbreeze/rev1/config.h
+++ b/keyboards/afternoonlabs/oceanbreeze/rev1/config.h
@@ -16,12 +16,4 @@
#pragma once
-// wiring of each half
-#define MATRIX_ROW_PINS \
- { F4, F5, F6, F7, B1, B6 }
-#define MATRIX_COL_PINS \
- { B2, D1, D0, D4, C6, D7, E6, B4, B5 }
-
#define SPLIT_HAND_PIN B3
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/afternoonlabs/oceanbreeze/rev1/info.json b/keyboards/afternoonlabs/oceanbreeze/rev1/info.json
index 531d2622ca40..1a099ee54843 100644
--- a/keyboards/afternoonlabs/oceanbreeze/rev1/info.json
+++ b/keyboards/afternoonlabs/oceanbreeze/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0003",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F4", "F5", "F6", "F7", "B1", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D2"
},
diff --git a/keyboards/afternoonlabs/southern_breeze/rev1/config.h b/keyboards/afternoonlabs/southern_breeze/rev1/config.h
index 1e51a357b2c5..d6bb6df14ce9 100644
--- a/keyboards/afternoonlabs/southern_breeze/rev1/config.h
+++ b/keyboards/afternoonlabs/southern_breeze/rev1/config.h
@@ -16,12 +16,4 @@
#pragma once
-// wiring of each half
-#define MATRIX_ROW_PINS \
- { F4, F5, F6, F7, B1 }
-#define MATRIX_COL_PINS \
- { B2, D1, D0, D4, C6, D7, E6, B4, B5 }
-
#define SPLIT_HAND_PIN B3
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/afternoonlabs/southern_breeze/rev1/info.json b/keyboards/afternoonlabs/southern_breeze/rev1/info.json
index 17bb446694af..c9a7ecc3ca92 100644
--- a/keyboards/afternoonlabs/southern_breeze/rev1/info.json
+++ b/keyboards/afternoonlabs/southern_breeze/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0005",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F4", "F5", "F6", "F7", "B1"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D2"
},
diff --git a/keyboards/afternoonlabs/summer_breeze/rev1/config.h b/keyboards/afternoonlabs/summer_breeze/rev1/config.h
index 1e51a357b2c5..d6bb6df14ce9 100644
--- a/keyboards/afternoonlabs/summer_breeze/rev1/config.h
+++ b/keyboards/afternoonlabs/summer_breeze/rev1/config.h
@@ -16,12 +16,4 @@
#pragma once
-// wiring of each half
-#define MATRIX_ROW_PINS \
- { F4, F5, F6, F7, B1 }
-#define MATRIX_COL_PINS \
- { B2, D1, D0, D4, C6, D7, E6, B4, B5 }
-
#define SPLIT_HAND_PIN B3
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/afternoonlabs/summer_breeze/rev1/info.json b/keyboards/afternoonlabs/summer_breeze/rev1/info.json
index e5ac8d452da7..f42ad75bac61 100644
--- a/keyboards/afternoonlabs/summer_breeze/rev1/info.json
+++ b/keyboards/afternoonlabs/summer_breeze/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0004",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F4", "F5", "F6", "F7", "B1"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D2"
},
diff --git a/keyboards/ai03/andromeda/config.h b/keyboards/ai03/andromeda/config.h
index 1fb163a652ff..056f54d52121 100644
--- a/keyboards/ai03/andromeda/config.h
+++ b/keyboards/ai03/andromeda/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see .
#pragma once
-#define MATRIX_COL_PINS { A10, A9, A8, B15, B14, B13, B12, B11, B10, B2, B1, B0, A7, A6, B5, B8, B9 }
-#define MATRIX_ROW_PINS { B4, B3, A15, A3, A4, A5 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ai03/andromeda/info.json b/keyboards/ai03/andromeda/info.json
index ade4938b829b..e29bb3e121ae 100644
--- a/keyboards/ai03/andromeda/info.json
+++ b/keyboards/ai03/andromeda/info.json
@@ -8,6 +8,11 @@
"pid": "0x000A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A10", "A9", "A8", "B15", "B14", "B13", "B12", "B11", "B10", "B2", "B1", "B0", "A7", "A6", "B5", "B8", "B9"],
+ "rows": ["B4", "B3", "A15", "A3", "A4", "A5"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "A2",
"scroll_lock": "A1",
diff --git a/keyboards/ai03/equinox/config.h b/keyboards/ai03/equinox/config.h
index 32065a4740d1..50001e978cc4 100644
--- a/keyboards/ai03/equinox/config.h
+++ b/keyboards/ai03/equinox/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D3, C5, D4, D5 }
-#define MATRIX_COL_PINS { D1, D2, C6, C7, B6, B5, B4, B3, B2, B1, B0, D6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ai03/equinox/rev0/config.h b/keyboards/ai03/equinox/rev0/config.h
deleted file mode 100644
index 78c6fb8fcdfe..000000000000
--- a/keyboards/ai03/equinox/rev0/config.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
-Copyright 2019 Ryota Goto
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-// Fix for prototype missing COL0, COL1, using backlight and RGB underglow I/O pins
-#undef MATRIX_COL_PINS
-#define MATRIX_COL_PINS { C4, B7, C6, C7, B6, B5, B4, B3, B2, B1, B0, D6 }
diff --git a/keyboards/ai03/equinox/rev0/info.json b/keyboards/ai03/equinox/rev0/info.json
index d76623777e2c..f5dd36556458 100644
--- a/keyboards/ai03/equinox/rev0/info.json
+++ b/keyboards/ai03/equinox/rev0/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["C4", "B7", "C6", "C7", "B6", "B5", "B4", "B3", "B2", "B1", "B0", "D6"],
+ "rows": ["D3", "C5", "D4", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "D1",
"levels": 5,
diff --git a/keyboards/ai03/equinox/rev1/info.json b/keyboards/ai03/equinox/rev1/info.json
index 19cd40d140ae..9c0727f7baa8 100644
--- a/keyboards/ai03/equinox/rev1/info.json
+++ b/keyboards/ai03/equinox/rev1/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["D1", "D2", "C6", "C7", "B6", "B5", "B4", "B3", "B2", "B1", "B0", "D6"],
+ "rows": ["D3", "C5", "D4", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"levels": 5,
diff --git a/keyboards/ai03/jp60/config.h b/keyboards/ai03/jp60/config.h
index 76e81dc2aa7c..9fe6627ecc19 100644
--- a/keyboards/ai03/jp60/config.h
+++ b/keyboards/ai03/jp60/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B6, B5, B4, D7, E6 }
-#define MATRIX_COL_PINS { D2, D1, D3, D5, D4, D6, C6, F0, F1, F4, F5, F6, F7, C7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ai03/jp60/info.json b/keyboards/ai03/jp60/info.json
index 3a07c7224c3f..c7b55c53be96 100644
--- a/keyboards/ai03/jp60/info.json
+++ b/keyboards/ai03/jp60/info.json
@@ -8,6 +8,11 @@
"pid": "0x0024",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D2", "D1", "D3", "D5", "D4", "D6", "C6", "F0", "F1", "F4", "F5", "F6", "F7", "C7"],
+ "rows": ["B6", "B5", "B4", "D7", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/ai03/lunar/config.h b/keyboards/ai03/lunar/config.h
index 10c8ab70ab6c..50001e978cc4 100644
--- a/keyboards/ai03/lunar/config.h
+++ b/keyboards/ai03/lunar/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B3, D0, D1, D2, D3 }
-#define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1, F0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ai03/lunar/info.json b/keyboards/ai03/lunar/info.json
index 6c069207e13f..2b97d0042ce3 100644
--- a/keyboards/ai03/lunar/info.json
+++ b/keyboards/ai03/lunar/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1", "F0"],
+ "rows": ["B3", "D0", "D1", "D2", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/ai03/orbit/config.h b/keyboards/ai03/orbit/config.h
index 85d4ae5bfe75..f4157a1729cf 100644
--- a/keyboards/ai03/orbit/config.h
+++ b/keyboards/ai03/orbit/config.h
@@ -17,25 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F7, F6, F5, F4, D3 }
-#define MATRIX_COL_PINS { C7, B4, D7, D6, D4, F1, F0 }
-#define MATRIX_ROW_PINS_RIGHT { B6, B5, B4, D7, E6 }
-#define MATRIX_COL_PINS_RIGHT { D4, D6, F1, F0, F4, F5, C6 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define SELECT_SOFT_SERIAL_SPEED 1
#define SPLIT_LED_STATE_ENABLE
diff --git a/keyboards/ai03/orbit/info.json b/keyboards/ai03/orbit/info.json
index 840fb1fc20d6..981f3cd68527 100644
--- a/keyboards/ai03/orbit/info.json
+++ b/keyboards/ai03/orbit/info.json
@@ -8,11 +8,22 @@
"pid": "0x0003",
"device_version": "0.0.3"
},
+ "matrix_pins": {
+ "cols": ["C7", "B4", "D7", "D6", "D4", "F1", "F0"],
+ "rows": ["F7", "F6", "F5", "F4", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7"
},
"split": {
- "soft_serial_pin": "D0"
+ "soft_serial_pin": "D0",
+ "matrix_pins": {
+ "right": {
+ "cols": ["D4", "D6", "F1", "F0", "F4", "F5", "C6"],
+ "rows": ["B6", "B5", "B4", "D7", "E6"]
+ }
+ }
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
diff --git a/keyboards/ai03/orbit_x/config.h b/keyboards/ai03/orbit_x/config.h
index 27a383f7bb68..05d319d030a2 100644
--- a/keyboards/ai03/orbit_x/config.h
+++ b/keyboards/ai03/orbit_x/config.h
@@ -17,25 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D7, D6, D4, F0 }
-#define MATRIX_COL_PINS { E6, F6, B1, B0, C7, C6 }
-#define MATRIX_ROW_PINS_RIGHT { B5, D7, B4, D4 }
-#define MATRIX_COL_PINS_RIGHT { D6, B6, B1, B0, B3, B2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define SPLIT_HAND_PIN D5
#define SPLIT_USB_DETECT
#define SPLIT_USB_TIMEOUT 2500
diff --git a/keyboards/ai03/orbit_x/info.json b/keyboards/ai03/orbit_x/info.json
index fdb26bddf44c..ef52a070e2d5 100644
--- a/keyboards/ai03/orbit_x/info.json
+++ b/keyboards/ai03/orbit_x/info.json
@@ -8,8 +8,19 @@
"pid": "0x0014",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "F6", "B1", "B0", "C7", "C6"],
+ "rows": ["D7", "D6", "D4", "F0"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
- "soft_serial_pin": "D0"
+ "soft_serial_pin": "D0",
+ "matrix_pins": {
+ "right": {
+ "cols": ["D6", "B6", "B1", "B0", "B3", "B2"],
+ "rows": ["B5", "D7", "B4", "D4"]
+ }
+ }
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
diff --git a/keyboards/ai03/polaris/config.h b/keyboards/ai03/polaris/config.h
index 871f4bc8db9b..3946e761c330 100644
--- a/keyboards/ai03/polaris/config.h
+++ b/keyboards/ai03/polaris/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B1, B2, B3, F0, F1 }
-#define MATRIX_COL_PINS { F4, F7, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D2
#ifdef RGB_DI_PIN
#define RGBLED_NUM 14
diff --git a/keyboards/ai03/polaris/info.json b/keyboards/ai03/polaris/info.json
index ae0fcb927db9..ee2f32ffae47 100644
--- a/keyboards/ai03/polaris/info.json
+++ b/keyboards/ai03/polaris/info.json
@@ -8,6 +8,11 @@
"pid": "0x0002",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F7", "F5", "F6", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3"],
+ "rows": ["B1", "B2", "B3", "F0", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"levels": 5,
diff --git a/keyboards/ai03/quasar/config.h b/keyboards/ai03/quasar/config.h
index 04765c07887f..50001e978cc4 100644
--- a/keyboards/ai03/quasar/config.h
+++ b/keyboards/ai03/quasar/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5, D4, D6, D7 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3, B7, F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ai03/quasar/info.json b/keyboards/ai03/quasar/info.json
index c29799484dca..68dc3c4a6fc5 100644
--- a/keyboards/ai03/quasar/info.json
+++ b/keyboards/ai03/quasar/info.json
@@ -8,6 +8,11 @@
"pid": "0x0010",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "B1", "B2", "B3", "B7", "F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4"],
+ "rows": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/ai03/soyuz/config.h b/keyboards/ai03/soyuz/config.h
index 027bc03faae1..50001e978cc4 100644
--- a/keyboards/ai03/soyuz/config.h
+++ b/keyboards/ai03/soyuz/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D4, C6, B6, E6, B4 }
-#define MATRIX_COL_PINS { F4, B3, D7, B5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ai03/soyuz/info.json b/keyboards/ai03/soyuz/info.json
index b008ef45b6c6..f10a5d400072 100644
--- a/keyboards/ai03/soyuz/info.json
+++ b/keyboards/ai03/soyuz/info.json
@@ -8,6 +8,11 @@
"pid": "0x0018",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "B3", "D7", "B5"],
+ "rows": ["D4", "C6", "B6", "E6", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["ortho_5x4", "numpad_5x4"],
diff --git a/keyboards/ai03/vega/config.h b/keyboards/ai03/vega/config.h
index b2798481d496..b575a49f3888 100644
--- a/keyboards/ai03/vega/config.h
+++ b/keyboards/ai03/vega/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see .
#pragma once
-#define MATRIX_COL_PINS { B5, A3, A9, A8, B15, B14, B13, B12, B11, B10, B2, B1, B0, A7, A6 }
-#define MATRIX_ROW_PINS { A1, A2, B3, A15, A10 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ai03/vega/info.json b/keyboards/ai03/vega/info.json
index 7b3c16cb5261..3da23cac0931 100644
--- a/keyboards/ai03/vega/info.json
+++ b/keyboards/ai03/vega/info.json
@@ -8,6 +8,11 @@
"pid": "0x0015",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B5", "A3", "A9", "A8", "B15", "B14", "B13", "B12", "B11", "B10", "B2", "B1", "B0", "A7", "A6"],
+ "rows": ["A1", "A2", "B3", "A15", "A10"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/ai03/voyager60_alps/config.h b/keyboards/ai03/voyager60_alps/config.h
index 30b7481688c6..704a6879f5cb 100644
--- a/keyboards/ai03/voyager60_alps/config.h
+++ b/keyboards/ai03/voyager60_alps/config.h
@@ -14,12 +14,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_ROW_PINS { B1, B2, B3, F0, F1 }
-#define MATRIX_COL_PINS { F4, F7, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3}
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D2
#ifdef RGB_DI_PIN
#define RGBLED_NUM 14
diff --git a/keyboards/ai03/voyager60_alps/info.json b/keyboards/ai03/voyager60_alps/info.json
index a7a68e43b03b..fed5542930be 100644
--- a/keyboards/ai03/voyager60_alps/info.json
+++ b/keyboards/ai03/voyager60_alps/info.json
@@ -8,6 +8,11 @@
"pid": "0x060A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F7", "F5", "F6", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3"],
+ "rows": ["B1", "B2", "B3", "F0", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/akb/eb46/config.h b/keyboards/akb/eb46/config.h
deleted file mode 100644
index 3fa5884805dc..000000000000
--- a/keyboards/akb/eb46/config.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
-Copyright 2019 Elliot Powell
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS \
- { B5, B4, D7, B6 }
-#define MATRIX_COL_PINS \
- { B0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D4, D6, C6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/akb/eb46/info.json b/keyboards/akb/eb46/info.json
index ad1f03501a77..d5c4312cc60f 100644
--- a/keyboards/akb/eb46/info.json
+++ b/keyboards/akb/eb46/info.json
@@ -7,6 +7,11 @@
"pid": "0xFEED",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "C6"],
+ "rows": ["B5", "B4", "D7", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/akb/raine/config.h b/keyboards/akb/raine/config.h
index 1f717ab43610..4ffa418a0917 100644
--- a/keyboards/akb/raine/config.h
+++ b/keyboards/akb/raine/config.h
@@ -16,16 +16,6 @@ along with this program. If not, see .
*/
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS \
- { E6, C6, F7, B2, B0 }
-#define MATRIX_COL_PINS \
- { F6, F5, F4, B1, F1, F0, B3, B7, D0, D1, D2, D3, D5, D4, D6, D7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/akb/raine/info.json b/keyboards/akb/raine/info.json
index f6f648e137ef..9fe50b25af4e 100644
--- a/keyboards/akb/raine/info.json
+++ b/keyboards/akb/raine/info.json
@@ -7,6 +7,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F6", "F5", "F4", "B1", "F1", "F0", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7"],
+ "rows": ["E6", "C6", "F7", "B2", "B0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/akegata_denki/device_one/config.h b/keyboards/akegata_denki/device_one/config.h
deleted file mode 100644
index dc1e1cded34d..000000000000
--- a/keyboards/akegata_denki/device_one/config.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#pragma once
-
-
-#define MATRIX_ROW_PINS { B1, B0, A9, A8, A0 }
-#define MATRIX_COL_PINS { A2, A3, A4, A5, A6, A7, A1, A10, A15, B3, B4, B5, B6, B7, B8}
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/akegata_denki/device_one/info.json b/keyboards/akegata_denki/device_one/info.json
index a00144adf7ad..59449c47547c 100644
--- a/keyboards/akegata_denki/device_one/info.json
+++ b/keyboards/akegata_denki/device_one/info.json
@@ -6,7 +6,12 @@
"vid": "0xFEED",
"pid": "0xADD0",
"device_version": "0.0.1"
- },
+ },
+ "matrix_pins": {
+ "cols": ["A2", "A3", "A4", "A5", "A6", "A7", "A1", "A10", "A15", "B3", "B4", "B5", "B6", "B7", "B8"],
+ "rows": ["B1", "B0", "A9", "A8", "A0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F042",
"bootloader": "stm32-dfu",
"board": "ST_NUCLEO32_F042K6",
diff --git a/keyboards/alas/config.h b/keyboards/alas/config.h
index 95a8e7bcdb11..a4424815608e 100644
--- a/keyboards/alas/config.h
+++ b/keyboards/alas/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-#define MATRIX_ROW_PINS { A2, B9, B8, B5, B4 }
-#define MATRIX_COL_PINS { A1, B1, B0, A7, A6, A5, A4, A3, B2, B10, B11, B12, B13, B14 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Ensure we jump to bootloader if the RESET keycode was pressed */
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
diff --git a/keyboards/alas/info.json b/keyboards/alas/info.json
index aa87efaae34e..1563fd843cdd 100755
--- a/keyboards/alas/info.json
+++ b/keyboards/alas/info.json
@@ -8,6 +8,11 @@
"pid": "0x414C",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A1", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "B2", "B10", "B11", "B12", "B13", "B14"],
+ "rows": ["A2", "B9", "B8", "B5", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/aleblazer/zodiark/config.h b/keyboards/aleblazer/zodiark/config.h
index 148e9a767200..5f80ba36b48d 100644
--- a/keyboards/aleblazer/zodiark/config.h
+++ b/keyboards/aleblazer/zodiark/config.h
@@ -18,12 +18,6 @@ along with this program. If not, see .
#define SELECT_SOFT_SERIAL_SPEED 1
-#define DIODE_DIRECTION COL2ROW
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { C6, D7, E6, B4, F4 }
-#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
-
#define RGB_DI_PIN B5
#ifdef RGBLIGHT_ENABLE
diff --git a/keyboards/aleblazer/zodiark/info.json b/keyboards/aleblazer/zodiark/info.json
index 821111762574..ca63fd47dd57 100644
--- a/keyboards/aleblazer/zodiark/info.json
+++ b/keyboards/aleblazer/zodiark/info.json
@@ -8,6 +8,11 @@
"pid": "0xF902",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"],
+ "rows": ["C6", "D7", "E6", "B4", "F4"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D2", "pin_b": "D4", "resolution": 3}
diff --git a/keyboards/alf/dc60/config.h b/keyboards/alf/dc60/config.h
index e81b6a201063..b62a2cc0acfc 100644
--- a/keyboards/alf/dc60/config.h
+++ b/keyboards/alf/dc60/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 }
-#define MATRIX_COL_PINS { B5, D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, F4, F5, F6, F7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN E6
#ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/alf/dc60/info.json b/keyboards/alf/dc60/info.json
index faf199d8a06a..1ec142f403b6 100644
--- a/keyboards/alf/dc60/info.json
+++ b/keyboards/alf/dc60/info.json
@@ -7,6 +7,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B5", "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7", "C6", "C7", "F4", "F5", "F6", "F7"],
+ "rows": ["B0", "B1", "B2", "B3", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B6",
"levels": 5,
diff --git a/keyboards/alf/x11/config.h b/keyboards/alf/x11/config.h
index 04ebe0c65798..1c4361c5c51d 100644
--- a/keyboards/alf/x11/config.h
+++ b/keyboards/alf/x11/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D4, D5, D6, D7, F0, F1, F4, F5, F6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN F7
#ifdef RGB_DI_PIN
#define RGBLED_NUM 28
diff --git a/keyboards/alf/x11/info.json b/keyboards/alf/x11/info.json
index 8b3ae6f2bae3..a3e18ce9b357 100644
--- a/keyboards/alf/x11/info.json
+++ b/keyboards/alf/x11/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7", "F0", "F1", "F4", "F5", "F6"],
+ "rows": ["B0", "B1", "B2", "B3", "B4", "B5", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"breathing": true
diff --git a/keyboards/alf/x2/config.h b/keyboards/alf/x2/config.h
index 374873d5d57a..5faf0aad8b68 100644
--- a/keyboards/alf/x2/config.h
+++ b/keyboards/alf/x2/config.h
@@ -16,16 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS \
- { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS \
- { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/alf/x2/info.json b/keyboards/alf/x2/info.json
index 5e0b3087a864..7c1b3b99672c 100644
--- a/keyboards/alf/x2/info.json
+++ b/keyboards/alf/x2/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "E6", "C7", "C6", "B7", "D4", "B1", "B0", "B5", "B4", "D7", "D6", "B3", "F4"],
+ "rows": ["D0", "D1", "D2", "D3", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B2",
"on_state": 0
diff --git a/keyboards/alfredslab/swift65/hotswap/config.h b/keyboards/alfredslab/swift65/hotswap/config.h
index 585855ebe93e..1fc317877dcf 100644
--- a/keyboards/alfredslab/swift65/hotswap/config.h
+++ b/keyboards/alfredslab/swift65/hotswap/config.h
@@ -16,22 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B1, B2, B3, D6, D4 }
-#define MATRIX_COL_PINS { F7, F6, F5, F4, F1, F0, C7, C6, B6, B5, B4, D7, D5, D3, D1 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D2
#ifdef RGB_DI_PIN
#define RGBLED_NUM 22
diff --git a/keyboards/alfredslab/swift65/hotswap/info.json b/keyboards/alfredslab/swift65/hotswap/info.json
index 89ac7c7b17cd..775c5808797d 100644
--- a/keyboards/alfredslab/swift65/hotswap/info.json
+++ b/keyboards/alfredslab/swift65/hotswap/info.json
@@ -8,6 +8,11 @@
"pid": "0xD4C4",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F7", "F6", "F5", "F4", "F1", "F0", "C7", "C6", "B6", "B5", "B4", "D7", "D5", "D3", "D1"],
+ "rows": ["B1", "B2", "B3", "D6", "D4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/alfredslab/swift65/solder/config.h b/keyboards/alfredslab/swift65/solder/config.h
index aa2502a0a164..ae3dc8c2e09e 100644
--- a/keyboards/alfredslab/swift65/solder/config.h
+++ b/keyboards/alfredslab/swift65/solder/config.h
@@ -17,22 +17,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B1, B2, B3, D4, D6 }
-#define MATRIX_COL_PINS { F7, F6, F5, F4, F1, F0, C7, C6, B6, B5, B4, D7, D5, D3, D1, D0 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D2
#ifdef RGB_DI_PIN
#define RGBLED_NUM 14
diff --git a/keyboards/alfredslab/swift65/solder/info.json b/keyboards/alfredslab/swift65/solder/info.json
index 0f1d9c428e43..23f3e16fc4b2 100644
--- a/keyboards/alfredslab/swift65/solder/info.json
+++ b/keyboards/alfredslab/swift65/solder/info.json
@@ -8,6 +8,11 @@
"pid": "0xD4C3",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F7", "F6", "F5", "F4", "F1", "F0", "C7", "C6", "B6", "B5", "B4", "D7", "D5", "D3", "D1", "D0"],
+ "rows": ["B1", "B2", "B3", "D4", "D6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/aliceh66/pianoforte/config.h b/keyboards/aliceh66/pianoforte/config.h
index 40d071201a5e..91e02255699a 100644
--- a/keyboards/aliceh66/pianoforte/config.h
+++ b/keyboards/aliceh66/pianoforte/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see .
#pragma once
-#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, F1, F0, E6, B6 }
-#define MATRIX_ROW_PINS { D1, D0, D3, D2, D5, B0, C6, C7, F6, F7, F5, F4 }
-#define DIODE_DIRECTION COL2ROW
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 2
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/aliceh66/pianoforte/info.json b/keyboards/aliceh66/pianoforte/info.json
index 56e2bf2cdfcb..60fd6a7ba936 100644
--- a/keyboards/aliceh66/pianoforte/info.json
+++ b/keyboards/aliceh66/pianoforte/info.json
@@ -8,6 +8,11 @@
"pid": "0x7066",
"vid": "0x6168"
},
+ "matrix_pins": {
+ "cols": ["D4", "D6", "D7", "B4", "B5", "F1", "F0", "E6", "B6"],
+ "rows": ["D1", "D0", "D3", "D2", "D5", "B0", "C6", "C7", "F6", "F7", "F5", "F4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["tkl_f13_ansi", "tkl_f13_iso"],
diff --git a/keyboards/aliceh66/pianoforte_hs/config.h b/keyboards/aliceh66/pianoforte_hs/config.h
index 7aa6ea4e4b49..91e02255699a 100644
--- a/keyboards/aliceh66/pianoforte_hs/config.h
+++ b/keyboards/aliceh66/pianoforte_hs/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see .
#pragma once
-#define MATRIX_COL_PINS { D6, D7, B4, B5, B6, F6, F5, E6, D4 }
-#define MATRIX_ROW_PINS { D2, D1, D3, D0, D5, B0, F0, F1, F7, F4, C7, C6 }
-#define DIODE_DIRECTION COL2ROW
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 2
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/aliceh66/pianoforte_hs/info.json b/keyboards/aliceh66/pianoforte_hs/info.json
index d6e7fa34e8ea..42bc824a9fd9 100644
--- a/keyboards/aliceh66/pianoforte_hs/info.json
+++ b/keyboards/aliceh66/pianoforte_hs/info.json
@@ -8,6 +8,11 @@
"pid": "0x7068",
"vid": "0x6168"
},
+ "matrix_pins": {
+ "cols": ["D6", "D7", "B4", "B5", "B6", "F6", "F5", "E6", "D4"],
+ "rows": ["D2", "D1", "D3", "D0", "D5", "B0", "F0", "F1", "F7", "F4", "C7", "C6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/alpha/config.h b/keyboards/alpha/config.h
index 828839870afd..0f104a2a5c3a 100755
--- a/keyboards/alpha/config.h
+++ b/keyboards/alpha/config.h
@@ -1,13 +1,5 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D4, B4, B5 }
-#define MATRIX_COL_PINS { D7, E6, C6, B6, B2, B3, B1, F7, F6, F5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/alpha/info.json b/keyboards/alpha/info.json
index 472bedb1faf6..1f76cce458da 100644
--- a/keyboards/alpha/info.json
+++ b/keyboards/alpha/info.json
@@ -7,6 +7,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D7", "E6", "C6", "B6", "B2", "B3", "B1", "F7", "F6", "F5"],
+ "rows": ["D4", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/alpine65/config.h b/keyboards/alpine65/config.h
index 61af018700dd..1dee90a07f10 100644
--- a/keyboards/alpine65/config.h
+++ b/keyboards/alpine65/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see .
#pragma once
-#define MATRIX_COL_PINS { B9 , B8 , B7 , B6 , B5 , B4 , B3 , A15, A9 , A8 , B14, B12, A10, A0 , A1 }
-#define MATRIX_ROW_PINS { C14, C15, C13, A2 , A3 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/alpine65/info.json b/keyboards/alpine65/info.json
index 1c1407b45b72..ec59236ea53d 100644
--- a/keyboards/alpine65/info.json
+++ b/keyboards/alpine65/info.json
@@ -8,6 +8,11 @@
"pid": "0x0065",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A9", "A8", "B14", "B12", "A10", "A0", "A1"],
+ "rows": ["C14", "C15", "C13", "A2", "A3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/alps64/config.h b/keyboards/alps64/config.h
index aff4064bb40d..4b007cf387ee 100644
--- a/keyboards/alps64/config.h
+++ b/keyboards/alps64/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4, D5, D6, C2 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/alps64/info.json b/keyboards/alps64/info.json
index e1ea2b9b5ee7..3f3d6af0fc37 100644
--- a/keyboards/alps64/info.json
+++ b/keyboards/alps64/info.json
@@ -4,10 +4,15 @@
"url": "",
"maintainer": "qmk",
"usb": {
- "vid": "0x6873",
- "pid": "0x6464",
- "device_version": "0.0.1"
- },
+ "vid": "0x6873",
+ "pid": "0x6464",
+ "device_version": "0.0.1"
+ },
+ "matrix_pins": {
+ "cols": ["B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7"],
+ "rows": ["D0", "D1", "D2", "D3", "D4", "D5", "D6", "C2"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "C5",
},
diff --git a/keyboards/alt34/rev1/config.h b/keyboards/alt34/rev1/config.h
index 60e4a857cf22..ffff9dc8c6fd 100644
--- a/keyboards/alt34/rev1/config.h
+++ b/keyboards/alt34/rev1/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see .
#pragma once
-// wiring of each half
-#define MATRIX_ROW_PINS { D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { B6, B2, B3, B1, F7 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/alt34/rev1/info.json b/keyboards/alt34/rev1/info.json
index ce9e5388d7ec..b49357c68679 100644
--- a/keyboards/alt34/rev1/info.json
+++ b/keyboards/alt34/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3", "B1", "F7"],
+ "rows": ["D7", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["split_3x5_2"],
diff --git a/keyboards/amag23/config.h b/keyboards/amag23/config.h
index 82e82fc469bd..34e622bfb333 100644
--- a/keyboards/amag23/config.h
+++ b/keyboards/amag23/config.h
@@ -15,13 +15,6 @@
*/
#pragma once
-
-#define MATRIX_ROW_PINS { A0, A1, A2, A3 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
#define RGBLED_NUM 7
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/amag23/info.json b/keyboards/amag23/info.json
index 822f18c906b6..de2e7335078b 100644
--- a/keyboards/amag23/info.json
+++ b/keyboards/amag23/info.json
@@ -8,6 +8,11 @@
"pid": "0x2323",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "B1", "B2", "B3", "B4", "B5"],
+ "rows": ["A0", "A1", "A2", "A3"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32a",
"bootloader": "bootloadhid",
"layouts": {
diff --git a/keyboards/amjkeyboard/amj40/config.h b/keyboards/amjkeyboard/amj40/config.h
index bdefff8c4f99..f14e2fb185c8 100755
--- a/keyboards/amjkeyboard/amj40/config.h
+++ b/keyboards/amjkeyboard/amj40/config.h
@@ -17,15 +17,6 @@ along with this program. If not, see .
#pragma once
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { F4, F5, F6, F7}
-#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/amjkeyboard/amj40/info.json b/keyboards/amjkeyboard/amj40/info.json
index fe66c34b8699..60eeb456f4c8 100644
--- a/keyboards/amjkeyboard/amj40/info.json
+++ b/keyboards/amjkeyboard/amj40/info.json
@@ -8,6 +8,11 @@
"pid": "0x6072",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["F1", "F0", "E6", "C7", "C6", "B0", "D4", "B1", "B7", "B5", "B4", "D7"],
+ "rows": ["F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B6",
"levels": 4
diff --git a/keyboards/amjkeyboard/amj60/config.h b/keyboards/amjkeyboard/amj60/config.h
index 0a38f730328f..0f15b4316182 100644
--- a/keyboards/amjkeyboard/amj60/config.h
+++ b/keyboards/amjkeyboard/amj60/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5 }
-#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7, D6, B3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN E2
#ifdef RGB_DI_PIN
# define RGBLED_NUM 8
diff --git a/keyboards/amjkeyboard/amj60/info.json b/keyboards/amjkeyboard/amj60/info.json
index d62489469143..2f322c3bb6b1 100644
--- a/keyboards/amjkeyboard/amj60/info.json
+++ b/keyboards/amjkeyboard/amj60/info.json
@@ -8,6 +8,11 @@
"pid": "0x6066",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F1", "F0", "E6", "C7", "C6", "B0", "D4", "B1", "B7", "B5", "B4", "D7", "D6", "B3"],
+ "rows": ["F7", "F6", "F5", "F4", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B6",
"levels": 4,
diff --git a/keyboards/amjkeyboard/amj66/config.h b/keyboards/amjkeyboard/amj66/config.h
index 72711198764d..b48aca777003 100644
--- a/keyboards/amjkeyboard/amj66/config.h
+++ b/keyboards/amjkeyboard/amj66/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { F7, F6, F5, F4, F1 }
-#define MATRIX_COL_PINS { F0, B3, B2, B1, B0, B7, D0, D1, D2, D3, D5, D6, D7, B4, B5, B6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/amjkeyboard/amj66/info.json b/keyboards/amjkeyboard/amj66/info.json
index ed41d4d58cad..277d2ed79084 100644
--- a/keyboards/amjkeyboard/amj66/info.json
+++ b/keyboards/amjkeyboard/amj66/info.json
@@ -8,6 +8,11 @@
"pid": "0xBD66",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "B3", "B2", "B1", "B0", "B7", "D0", "D1", "D2", "D3", "D5", "D6", "D7", "B4", "B5", "B6"],
+ "rows": ["F7", "F6", "F5", "F4", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "D4",
"breathing": true
diff --git a/keyboards/amjkeyboard/amj84/config.h b/keyboards/amjkeyboard/amj84/config.h
index 7aef945e5b6a..da28e924006c 100644
--- a/keyboards/amjkeyboard/amj84/config.h
+++ b/keyboards/amjkeyboard/amj84/config.h
@@ -3,23 +3,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D0, F7, F6, F5, F4, D5 }
-#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7, D6, B3, D1 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/amjkeyboard/amj84/info.json b/keyboards/amjkeyboard/amj84/info.json
index 20f8fd99b14e..aeb61944458f 100644
--- a/keyboards/amjkeyboard/amj84/info.json
+++ b/keyboards/amjkeyboard/amj84/info.json
@@ -8,6 +8,11 @@
"pid": "0x6068",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F1", "F0", "E6", "C7", "C6", "B0", "D4", "B1", "B7", "B5", "B4", "D7", "D6", "B3", "D1"],
+ "rows": ["D0", "F7", "F6", "F5", "F4", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B6",
"breathing": true
diff --git a/keyboards/amjkeyboard/amjpad/config.h b/keyboards/amjkeyboard/amjpad/config.h
index 63e6e899fa9d..02b595d6f7c5 100644
--- a/keyboards/amjkeyboard/amjpad/config.h
+++ b/keyboards/amjkeyboard/amjpad/config.h
@@ -17,15 +17,6 @@ along with this program. If not, see .
#pragma once
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5, D0 }
-#define MATRIX_COL_PINS { F1, F0, E6, C7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/amjkeyboard/amjpad/info.json b/keyboards/amjkeyboard/amjpad/info.json
index 7a22d14639af..3bd3a7f24c2b 100644
--- a/keyboards/amjkeyboard/amjpad/info.json
+++ b/keyboards/amjkeyboard/amjpad/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.3"
},
+ "matrix_pins": {
+ "cols": ["F1", "F0", "E6", "C7"],
+ "rows": ["F7", "F6", "F5", "F4", "D5", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B6",
"levels": 4
diff --git a/keyboards/ano/config.h b/keyboards/ano/config.h
index df6d076d5c04..296abfa02e63 100644
--- a/keyboards/ano/config.h
+++ b/keyboards/ano/config.h
@@ -16,11 +16,6 @@
#pragma once
-#define MATRIX_ROW_PINS { A4, B14, B15, B9, B10, B11 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6, B7, A5, A6, A7, A8, A15, A2, A1, A0, B8, B13 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define TAP_CODE_DELAY 10
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/ano/info.json b/keyboards/ano/info.json
index 19d53a9ce10a..fd4ff724b83f 100644
--- a/keyboards/ano/info.json
+++ b/keyboards/ano/info.json
@@ -8,6 +8,11 @@
"pid": "0x0651",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7", "A5", "A6", "A7", "A8", "A15", "A2", "A1", "A0", "B8", "B13"],
+ "rows": ["A4", "B14", "B15", "B9", "B10", "B11"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B12", "pin_b": "A14", "resolution": 2}
diff --git a/keyboards/anomalykb/a65i/config.h b/keyboards/anomalykb/a65i/config.h
index 4e13b2edd93e..947f85bbb2b1 100644
--- a/keyboards/anomalykb/a65i/config.h
+++ b/keyboards/anomalykb/a65i/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-#define MATRIX_ROW_PINS { B3, B2, B1, B0, B5 }
-#define MATRIX_COL_PINS { D7, D6, D4, B4, B6, E6, F1, B7, C6, C7, D5, D3, D2, F0, D1, D0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/anomalykb/a65i/info.json b/keyboards/anomalykb/a65i/info.json
index d3307d7964bc..f5054f1b20a7 100644
--- a/keyboards/anomalykb/a65i/info.json
+++ b/keyboards/anomalykb/a65i/info.json
@@ -7,6 +7,11 @@
"pid": "0x0004",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D7", "D6", "D4", "B4", "B6", "E6", "F1", "B7", "C6", "C7", "D5", "D3", "D2", "F0", "D1", "D0"],
+ "rows": ["B3", "B2", "B1", "B0", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/aos/tkl/config.h b/keyboards/aos/tkl/config.h
index 466eff89afdd..84928fb97509 100644
--- a/keyboards/aos/tkl/config.h
+++ b/keyboards/aos/tkl/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_ROW_PINS { D3, D2, B7, F1, C7, D5 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3, F4, F5, F6, F7, B6, B5, D7, B4, D6, F0, D1, C6, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/aos/tkl/info.json b/keyboards/aos/tkl/info.json
index c6d37930a4a9..06a8892c634d 100644
--- a/keyboards/aos/tkl/info.json
+++ b/keyboards/aos/tkl/info.json
@@ -7,6 +7,11 @@
"pid": "0x1000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "B1", "B2", "B3", "F4", "F5", "F6", "F7", "B6", "B5", "D7", "B4", "D6", "F0", "D1", "C6", "D4"],
+ "rows": ["D3", "D2", "B7", "F1", "C7", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/aozora/config.h b/keyboards/aozora/config.h
index dc68828e0f78..5171d0c312de 100644
--- a/keyboards/aozora/config.h
+++ b/keyboards/aozora/config.h
@@ -16,21 +16,5 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F6, F5, F4, F1, F0 }
-#define MATRIX_COL_PINS { B0, B1, B2, B3, B7, D0, D1, D4, D6, D7, B4, B5, B6, C6, C7, F7, D2}
-
-#define DIODE_DIRECTION COL2ROW
-
/* EEPROM for via */
#define DYNAMIC_KEYMAP_LAYER_COUNT 2
diff --git a/keyboards/aozora/info.json b/keyboards/aozora/info.json
index b385261282cf..b49708a336c6 100644
--- a/keyboards/aozora/info.json
+++ b/keyboards/aozora/info.json
@@ -8,6 +8,11 @@
"pid": "0xE86A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "B1", "B2", "B3", "B7", "D0", "D1", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "D2"],
+ "rows": ["F6", "F5", "F4", "F1", "F0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/aplyard/aplx6/rev1/config.h b/keyboards/aplyard/aplx6/rev1/config.h
deleted file mode 100644
index cd4a58eec51e..000000000000
--- a/keyboards/aplyard/aplx6/rev1/config.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
-Copyright 2020 April Aplyard
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-
-/* pin-out */
-#define MATRIX_ROW_PINS { E6, B3 }
-#define MATRIX_COL_PINS { F7, B6, F4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/aplyard/aplx6/rev1/info.json b/keyboards/aplyard/aplx6/rev1/info.json
index 6a1ac3071b6b..167699150fb8 100644
--- a/keyboards/aplyard/aplx6/rev1/info.json
+++ b/keyboards/aplyard/aplx6/rev1/info.json
@@ -3,6 +3,11 @@
"pid": "0x0030",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F7", "B6", "F4"],
+ "rows": ["E6", "B3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina"
}
diff --git a/keyboards/aplyard/aplx6/rev2/config.h b/keyboards/aplyard/aplx6/rev2/config.h
index f2793935cbcb..2724ccf11718 100644
--- a/keyboards/aplyard/aplx6/rev2/config.h
+++ b/keyboards/aplyard/aplx6/rev2/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* 9Key PCB default pin-out */
-#define MATRIX_ROW_PINS { B4, B5 }
-#define MATRIX_COL_PINS { C6, D7, E6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define TAPPING_TERM 200
#define TAP_CODE_DELAY 50
diff --git a/keyboards/aplyard/aplx6/rev2/info.json b/keyboards/aplyard/aplx6/rev2/info.json
index 114894a71449..726dab814c88 100644
--- a/keyboards/aplyard/aplx6/rev2/info.json
+++ b/keyboards/aplyard/aplx6/rev2/info.json
@@ -3,6 +3,11 @@
"pid": "0x0040",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["C6", "D7", "E6"],
+ "rows": ["B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "F5", "pin_b": "F4"}
diff --git a/keyboards/arabica37/rev1/config.h b/keyboards/arabica37/rev1/config.h
index 495e8dcb326a..62111b4b719f 100644
--- a/keyboards/arabica37/rev1/config.h
+++ b/keyboards/arabica37/rev1/config.h
@@ -18,14 +18,6 @@ along with this program. If not, see .
#pragma once
-#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
-
-// wiring of each half
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
-// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
-
-#define DIODE_DIRECTION COL2ROW
-
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
diff --git a/keyboards/arabica37/rev1/info.json b/keyboards/arabica37/rev1/info.json
index 3629bf761f85..36ff667df1fe 100644
--- a/keyboards/arabica37/rev1/info.json
+++ b/keyboards/arabica37/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x3060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2"],
+ "rows": ["D4", "C6", "D7", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D2"
},
diff --git a/keyboards/ares/config.h b/keyboards/ares/config.h
index 3d384af9eadc..ddc21dae3085 100644
--- a/keyboards/ares/config.h
+++ b/keyboards/ares/config.h
@@ -20,11 +20,6 @@ along with this program. If not, see .
#define RGBLED_NUM 16
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 }
-#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/ares/info.json b/keyboards/ares/info.json
index 391c7a8125cd..ecbe2c18dcbb 100644
--- a/keyboards/ares/info.json
+++ b/keyboards/ares/info.json
@@ -8,6 +8,11 @@
"pid": "0x422D",
"device_version": "2.0.0"
},
+ "matrix_pins": {
+ "cols": ["A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "C7", "C6", "C5", "C4", "C3", "C2", "D7"],
+ "rows": ["B0", "B1", "B2", "B3", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "D4"
},
diff --git a/keyboards/arisu/config.h b/keyboards/arisu/config.h
index 5001da55908e..3cf449a32bf4 100644
--- a/keyboards/arisu/config.h
+++ b/keyboards/arisu/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B7, B5, B4, D7, D6, B3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/arisu/info.json b/keyboards/arisu/info.json
index 1fe2eadbe3ed..941f9a467d92 100644
--- a/keyboards/arisu/info.json
+++ b/keyboards/arisu/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "E6", "C7", "C6", "B6", "D4", "B1", "B0", "B7", "B5", "B4", "D7", "D6", "B3"],
+ "rows": ["D0", "D1", "D2", "D3", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/ash1800/config.h b/keyboards/ash1800/config.h
index c48bc4ec6add..2f259d40f67b 100644
--- a/keyboards/ash1800/config.h
+++ b/keyboards/ash1800/config.h
@@ -17,27 +17,10 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, D0, D1, D2, D3, D5, D4, D6 }
-#define MATRIX_COL_PINS { F1, F4, F5, F6, B0, B2, B1, B3, B7, C7 }
-
#define NUM_LOCK_LED_PIN E6
#define CAPS_LOCK_LED_PIN F0
#define SCROLL_LOCK_LED_PIN F7
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/ash1800/info.json b/keyboards/ash1800/info.json
index 2c9338b2f6f6..e843d52f2b8b 100644
--- a/keyboards/ash1800/info.json
+++ b/keyboards/ash1800/info.json
@@ -7,6 +7,11 @@
"pid": "0x1800",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F1", "F4", "F5", "F6", "B0", "B2", "B1", "B3", "B7", "C7"],
+ "rows": ["C6", "B6", "B5", "B4", "D7", "D0", "D1", "D2", "D3", "D5", "D4", "D6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/ash_xiix/config.h b/keyboards/ash_xiix/config.h
index e21327b99c9b..8f81c450eb55 100644
--- a/keyboards/ash_xiix/config.h
+++ b/keyboards/ash_xiix/config.h
@@ -14,27 +14,10 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, D0, D1, D2, D3, D5, D4, D6 }
-#define MATRIX_COL_PINS { F1, F4, F5, F6, B0, B2, B1, B3, B7, C7 }
-
#define NUM_LOCK_LED_PIN E6
#define CAPS_LOCK_LED_PIN F0
#define SCROLL_LOCK_LED_PIN F7
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/ash_xiix/info.json b/keyboards/ash_xiix/info.json
index 4bc7fb1987f8..3eaa711e3135 100644
--- a/keyboards/ash_xiix/info.json
+++ b/keyboards/ash_xiix/info.json
@@ -8,6 +8,11 @@
"pid": "0x14BC",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F1", "F4", "F5", "F6", "B0", "B2", "B1", "B3", "B7", "C7"],
+ "rows": ["C6", "B6", "B5", "B4", "D7", "D0", "D1", "D2", "D3", "D5", "D4", "D6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/ashpil/modelm_usbc/config.h b/keyboards/ashpil/modelm_usbc/config.h
deleted file mode 100644
index 00c5f5626bec..000000000000
--- a/keyboards/ashpil/modelm_usbc/config.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-Copyright 2019 ashpil
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { C7, C6, C5, C4, C3, C2, C1, C0 }
-#define MATRIX_COL_PINS { E6, E7, F0, F1, F2, F3, F4, F5, F6, F7, A0, A1, A2, A3, A4, A5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
diff --git a/keyboards/ashpil/modelm_usbc/info.json b/keyboards/ashpil/modelm_usbc/info.json
index c048dd047a06..f34dfa63fea9 100644
--- a/keyboards/ashpil/modelm_usbc/info.json
+++ b/keyboards/ashpil/modelm_usbc/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "E7", "F0", "F1", "F2", "F3", "F4", "F5", "F6", "F7", "A0", "A1", "A2", "A3", "A4", "A5"],
+ "rows": ["C7", "C6", "C5", "C4", "C3", "C2", "C1", "C0"]
+ },
+ "diode_direction": "ROW2COL",
"bootmagic": {
"matrix": [0, 2]
},
diff --git a/keyboards/at_at/660m/config.h b/keyboards/at_at/660m/config.h
index bf470511936c..70ad2757b92b 100644
--- a/keyboards/at_at/660m/config.h
+++ b/keyboards/at_at/660m/config.h
@@ -23,10 +23,6 @@ along with this program. If not, see .
/* LSE clock */
#define STM32_LSECLK 32768
-#define MATRIX_COL_PINS { B15, B14, B13, B12, B11, B10, B2, B1, B9, B8, B7, B6, B5, B3, B4, B0 }
-#define MATRIX_ROW_PINS { A3, A4, A5, A0, A1 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/at_at/660m/info.json b/keyboards/at_at/660m/info.json
index 49af28517727..4fdd84daeb02 100644
--- a/keyboards/at_at/660m/info.json
+++ b/keyboards/at_at/660m/info.json
@@ -8,6 +8,11 @@
"pid": "0x6600",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B15", "B14", "B13", "B12", "B11", "B10", "B2", "B1", "B9", "B8", "B7", "B6", "B5", "B3", "B4", "B0"],
+ "rows": ["A3", "A4", "A5", "A0", "A1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/atlantis/ak81_ve/config.h b/keyboards/atlantis/ak81_ve/config.h
index 7379856a4f82..9790c7555654 100644
--- a/keyboards/atlantis/ak81_ve/config.h
+++ b/keyboards/atlantis/ak81_ve/config.h
@@ -16,17 +16,9 @@
#pragma once
-
-/* Key matrix pins */
-#define MATRIX_ROW_PINS { F1, F7, F6, F5, F4, D5 }
-#define MATRIX_COL_PINS { F0, C7, C6, B6, B5, B4, D7, D6, B2, B7, D3, D2, D1, D0, B3 }
-
#define ENCODERS_CCW_KEY { { 4, 5 } } // Note: array is { col, row )
#define ENCODERS_CW_KEY { { 3, 5 } } // Note: array is { col, row )
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/atlantis/ak81_ve/info.json b/keyboards/atlantis/ak81_ve/info.json
index 0269bd1e279d..eb731f38608e 100644
--- a/keyboards/atlantis/ak81_ve/info.json
+++ b/keyboards/atlantis/ak81_ve/info.json
@@ -7,6 +7,11 @@
"pid": "0x0081",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "B2", "B7", "D3", "D2", "D1", "D0", "B3"],
+ "rows": ["F1", "F7", "F6", "F5", "F4", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "E6", "pin_b": "B0"}
diff --git a/keyboards/atlas_65/config.h b/keyboards/atlas_65/config.h
index 78beebcc65a7..d0851ac1fde2 100644
--- a/keyboards/atlas_65/config.h
+++ b/keyboards/atlas_65/config.h
@@ -16,23 +16,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B7, B5, B4, D7, D6, B3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/atlas_65/info.json b/keyboards/atlas_65/info.json
index 7d755c37bfa4..af2487f60480 100644
--- a/keyboards/atlas_65/info.json
+++ b/keyboards/atlas_65/info.json
@@ -8,6 +8,11 @@
"pid": "0x1000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "E6", "C7", "C6", "B6", "D4", "B1", "B0", "B7", "B5", "B4", "D7", "D6", "B3"],
+ "rows": ["D0", "D1", "D2", "D3", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/atomic/config.h b/keyboards/atomic/config.h
index 9c50c21e3fff..b9449c4714bf 100644
--- a/keyboards/atomic/config.h
+++ b/keyboards/atomic/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D5, B5, B6, C6 }
-#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7, D3, D2, D1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/atomic/info.json b/keyboards/atomic/info.json
index 95f50889957a..0324d8533e90 100644
--- a/keyboards/atomic/info.json
+++ b/keyboards/atomic/info.json
@@ -7,6 +7,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F1", "F0", "B0", "C7", "F4", "F5", "F6", "F7", "D4", "D6", "B4", "D7", "D3", "D2", "D1"],
+ "rows": ["D0", "D5", "B5", "B6", "C6"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7"
},
diff --git a/keyboards/atreus/astar/config.h b/keyboards/atreus/astar/config.h
deleted file mode 100644
index 90bf37823d1c..000000000000
--- a/keyboards/atreus/astar/config.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Copyright 2019
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D3, D2 }
-#if defined(PCBDOWN)
- #define MATRIX_COL_PINS { B7, D6, F7, F6, B6, D4, E6, B4, B5, C6, D7 }
-#else
- #define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 }
-#endif
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/atreus/astar/info.json b/keyboards/atreus/astar/info.json
index 4369a0410385..e201078ffe77 100644
--- a/keyboards/atreus/astar/info.json
+++ b/keyboards/atreus/astar/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["D7", "C6", "B5", "B4", "E6", "D4", "B6", "F6", "F7", "D6", "B7"],
+ "rows": ["D0", "D1", "D3", "D2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina"
}
diff --git a/keyboards/atreus/astar_mirrored/config.h b/keyboards/atreus/astar_mirrored/config.h
index 83c9cf7fc682..3bd163dec358 100644
--- a/keyboards/atreus/astar_mirrored/config.h
+++ b/keyboards/atreus/astar_mirrored/config.h
@@ -16,21 +16,4 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
#define PCBDOWN 1
-
-#define MATRIX_ROW_PINS { D0, D1, D3, D2 }
-#define MATRIX_COL_PINS { B7, D6, F7, F6, B6, D4, E6, B4, B5, C6, D7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/atreus/astar_mirrored/info.json b/keyboards/atreus/astar_mirrored/info.json
index 4369a0410385..b83be5d29d42 100644
--- a/keyboards/atreus/astar_mirrored/info.json
+++ b/keyboards/atreus/astar_mirrored/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["B7", "D6", "F7", "F6", "B6", "D4", "E6", "B4", "B5", "C6", "D7"],
+ "rows": ["D0", "D1", "D3", "D2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina"
}
diff --git a/keyboards/atreus/f103/config.h b/keyboards/atreus/f103/config.h
deleted file mode 100644
index d6d3b033ddbc..000000000000
--- a/keyboards/atreus/f103/config.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Copyright 2022 DmNosachev
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-
-/* key matrix pins */
-#define MATRIX_COL_PINS { B10, B1, B0, A7, A6, B5, B4, B3, A15, A10, A9 }
-#define MATRIX_ROW_PINS { A5, A4, A3, A2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/atreus/f103/info.json b/keyboards/atreus/f103/info.json
index cf993be24710..341ed4e8e647 100644
--- a/keyboards/atreus/f103/info.json
+++ b/keyboards/atreus/f103/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["B10", "B1", "B0", "A7", "A6", "B5", "B4", "B3", "A15", "A10", "A9"],
+ "rows": ["A5", "A4", "A3", "A2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F103",
"bootloader": "stm32duino"
}
diff --git a/keyboards/atreus/feather/config.h b/keyboards/atreus/feather/config.h
index 34880f0e3ea4..505296a5056a 100644
--- a/keyboards/atreus/feather/config.h
+++ b/keyboards/atreus/feather/config.h
@@ -16,23 +16,4 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-// #define MATRIX_ROW_PINS { D0, D1, D3, D2 }
-// #define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 }
-#define MATRIX_ROW_PINS { B7, D6, C7, F5 }
-#define MATRIX_COL_PINS { D7, B5, D1, D0, C6, B6, F0, D2, D3, F4, F1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define OUTPUT_AUTO_ENABLE
diff --git a/keyboards/atreus/feather/info.json b/keyboards/atreus/feather/info.json
index 4369a0410385..1f70534b7f55 100644
--- a/keyboards/atreus/feather/info.json
+++ b/keyboards/atreus/feather/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["D7", "B5", "D1", "D0", "C6", "B6", "F0", "D2", "D3", "F4", "F1"],
+ "rows": ["B7", "D6", "C7", "F5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina"
}
diff --git a/keyboards/atreus/promicro/config.h b/keyboards/atreus/promicro/config.h
deleted file mode 100644
index 6c0dd1d4b967..000000000000
--- a/keyboards/atreus/promicro/config.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Copyright 2019
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F4, B2, B4, B5 }
-#if defined(PCBDOWN)
- #define MATRIX_COL_PINS { D0, D4, C6, D7, E6, B6, B3, B1, F7, F6, F5 }
-#else
- #define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B6, E6, D7, C6, D4, D0 }
-#endif
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/atreus/promicro/info.json b/keyboards/atreus/promicro/info.json
index 4369a0410385..e614b4e2a0a8 100644
--- a/keyboards/atreus/promicro/info.json
+++ b/keyboards/atreus/promicro/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["F5", "F6", "F7", "B1", "B3", "B6", "E6", "D7", "C6", "D4", "D0"],
+ "rows": ["F4", "B2", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina"
}
diff --git a/keyboards/atreus/teensy2/config.h b/keyboards/atreus/teensy2/config.h
deleted file mode 100644
index 4664561f9b63..000000000000
--- a/keyboards/atreus/teensy2/config.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* Copyright 2019
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3 }
-#define MATRIX_COL_PINS { F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/atreus/teensy2/info.json b/keyboards/atreus/teensy2/info.json
index 0b2db81c11eb..067ea9a01dd1 100644
--- a/keyboards/atreus/teensy2/info.json
+++ b/keyboards/atreus/teensy2/info.json
@@ -1,4 +1,9 @@
{
+ "matrix_pins": {
+ "cols": ["F6", "F5", "F4", "B7", "B6", "B5", "B4", "B3", "B2", "B1", "B0"],
+ "rows": ["D0", "D1", "D2", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "halfkay"
}
diff --git a/keyboards/atreus62/config.h b/keyboards/atreus62/config.h
index b497998196bb..9b7700e0139b 100644
--- a/keyboards/atreus62/config.h
+++ b/keyboards/atreus62/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-// wiring of each half
-#define MATRIX_ROW_PINS { D2, D3, D1, D0, D4 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B5, B4, E6, D7, C6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/atreus62/info.json b/keyboards/atreus62/info.json
index 9818475ace0f..0221f2c551ba 100644
--- a/keyboards/atreus62/info.json
+++ b/keyboards/atreus62/info.json
@@ -4,10 +4,15 @@
"url": "",
"maintainer": "qmk",
"usb": {
- "vid": "0xFEED",
- "pid": "0x6062",
- "device_version": "0.0.1"
- },
+ "vid": "0xFEED",
+ "pid": "0x6062",
+ "device_version": "0.0.1"
+ },
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6", "B5", "B4", "E6", "D7", "C6"],
+ "rows": ["D2", "D3", "D1", "D0", "D4"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/atreyu/rev1/config.h b/keyboards/atreyu/rev1/config.h
index 99eb2c21e60c..d7c434426bc9 100644
--- a/keyboards/atreyu/rev1/config.h
+++ b/keyboards/atreyu/rev1/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D7, E6, B4, B5, F6, F7, B1, B3, B6, B2 }
-#define MATRIX_COL_PINS { C6, D4, D0, D1, D2, D3 }
-
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/atreyu/rev1/info.json b/keyboards/atreyu/rev1/info.json
index 6d191d063562..00012812a4a7 100644
--- a/keyboards/atreyu/rev1/info.json
+++ b/keyboards/atreyu/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "D4", "D0", "D1", "D2", "D3"],
+ "rows": ["D7", "E6", "B4", "B5", "F6", "F7", "B1", "B3", "B6", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "F5", "pin_b": "F4"}
diff --git a/keyboards/atreyu/rev2/config.h b/keyboards/atreyu/rev2/config.h
index de63cf3bd1b5..d7c434426bc9 100644
--- a/keyboards/atreyu/rev2/config.h
+++ b/keyboards/atreyu/rev2/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D7, E6, B4, B5, F6, F7, B1, B3, B6, B2 }
-#define MATRIX_COL_PINS { F4, F5, C6, D4, D2, D3 }
-
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/atreyu/rev2/info.json b/keyboards/atreyu/rev2/info.json
index a890b8d27164..707f8554e0c5 100644
--- a/keyboards/atreyu/rev2/info.json
+++ b/keyboards/atreyu/rev2/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "C6", "D4", "D2", "D3"],
+ "rows": ["D7", "E6", "B4", "B5", "F6", "F7", "B1", "B3", "B6", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D5", "pin_b": "B7"},
diff --git a/keyboards/atset/at1/config.h b/keyboards/atset/at1/config.h
index 11b4549d4619..dc6abdcaf250 100644
--- a/keyboards/atset/at1/config.h
+++ b/keyboards/atset/at1/config.h
@@ -15,13 +15,6 @@
#pragma once
-
-#define MATRIX_ROW_PINS { D2 }
-#define MATRIX_COL_PINS { B6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/atset/at1/info.json b/keyboards/atset/at1/info.json
index 8e68513a436c..85b848e8d646 100644
--- a/keyboards/atset/at1/info.json
+++ b/keyboards/atset/at1/info.json
@@ -7,6 +7,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6"],
+ "rows": ["D2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/atset/at12/config.h b/keyboards/atset/at12/config.h
index 77ace78035bd..dc6abdcaf250 100644
--- a/keyboards/atset/at12/config.h
+++ b/keyboards/atset/at12/config.h
@@ -15,13 +15,6 @@
#pragma once
-
-#define MATRIX_ROW_PINS { D3, D2, D1, D0 }
-#define MATRIX_COL_PINS { B6, B5, B4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/atset/at12/info.json b/keyboards/atset/at12/info.json
index e7914318b823..7708afac2021 100644
--- a/keyboards/atset/at12/info.json
+++ b/keyboards/atset/at12/info.json
@@ -7,6 +7,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B5", "B4"],
+ "rows": ["D3", "D2", "D1", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/atset/at16/config.h b/keyboards/atset/at16/config.h
index 6db5e0ead502..dc6abdcaf250 100644
--- a/keyboards/atset/at16/config.h
+++ b/keyboards/atset/at16/config.h
@@ -15,13 +15,6 @@
#pragma once
-
-#define MATRIX_ROW_PINS { D3, D2, D1, D0 }
-#define MATRIX_COL_PINS { B6, B5, B4, B2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/atset/at16/info.json b/keyboards/atset/at16/info.json
index 3ea641eec95f..2d5daf6ab111 100644
--- a/keyboards/atset/at16/info.json
+++ b/keyboards/atset/at16/info.json
@@ -7,6 +7,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B5", "B4", "B2"],
+ "rows": ["D3", "D2", "D1", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["ortho_4x4"],
diff --git a/keyboards/atset/at3/config.h b/keyboards/atset/at3/config.h
index b9d7f7c64196..dc6abdcaf250 100644
--- a/keyboards/atset/at3/config.h
+++ b/keyboards/atset/at3/config.h
@@ -15,13 +15,6 @@
#pragma once
-
-#define MATRIX_ROW_PINS { D2 }
-#define MATRIX_COL_PINS { B6, B5, B4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/atset/at3/info.json b/keyboards/atset/at3/info.json
index 1241361d71af..9f804fad1a3a 100644
--- a/keyboards/atset/at3/info.json
+++ b/keyboards/atset/at3/info.json
@@ -7,6 +7,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B5", "B4"],
+ "rows": ["D2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/atset/at6/config.h b/keyboards/atset/at6/config.h
index 522ad5fec39c..dc6abdcaf250 100644
--- a/keyboards/atset/at6/config.h
+++ b/keyboards/atset/at6/config.h
@@ -15,13 +15,6 @@
#pragma once
-
-#define MATRIX_ROW_PINS { D2, D1 }
-#define MATRIX_COL_PINS { B6, B5, B4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/atset/at6/info.json b/keyboards/atset/at6/info.json
index 03be76e69663..bfcbafdff568 100644
--- a/keyboards/atset/at6/info.json
+++ b/keyboards/atset/at6/info.json
@@ -7,6 +7,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B5", "B4"],
+ "rows": ["D2", "D1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/atset/at9/config.h b/keyboards/atset/at9/config.h
index cc0fa4cbc829..dc6abdcaf250 100644
--- a/keyboards/atset/at9/config.h
+++ b/keyboards/atset/at9/config.h
@@ -15,13 +15,6 @@
#pragma once
-
-#define MATRIX_ROW_PINS { D2, D1, D0 }
-#define MATRIX_COL_PINS { B6, B5, B4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/atset/at9/info.json b/keyboards/atset/at9/info.json
index ecff089964c0..2afafe5cefb7 100644
--- a/keyboards/atset/at9/info.json
+++ b/keyboards/atset/at9/info.json
@@ -7,6 +7,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B5", "B4"],
+ "rows": ["D2", "D1", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/atxkb/1894/config.h b/keyboards/atxkb/1894/config.h
index e4f44cdfcee7..637150ae7b46 100644
--- a/keyboards/atxkb/1894/config.h
+++ b/keyboards/atxkb/1894/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B1, B2, B3, F0, F1 }
-#define MATRIX_COL_PINS { F4, F7, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D2
#ifdef RGB_DI_PIN
#define RGBLED_NUM 14
diff --git a/keyboards/atxkb/1894/info.json b/keyboards/atxkb/1894/info.json
index fef98bcacf9a..69615775b4a7 100644
--- a/keyboards/atxkb/1894/info.json
+++ b/keyboards/atxkb/1894/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F7", "F5", "F6", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3"],
+ "rows": ["B1", "B2", "B3", "F0", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"levels": 5,
diff --git a/keyboards/aurora65/config.h b/keyboards/aurora65/config.h
index 7b3f4608ead8..38fa2c088191 100644
--- a/keyboards/aurora65/config.h
+++ b/keyboards/aurora65/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_ROW_PINS { B3, B4, B5, A8, A4 }
-#define MATRIX_COL_PINS { A13, A10, A9, A14, A15, B8, B9, B2, B1, B0, A0, A1, A2, A3, A5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* RGB Light */
#define WS2812_PWM_DRIVER PWMD1
#define WS2812_PWM_CHANNEL 3
diff --git a/keyboards/aurora65/info.json b/keyboards/aurora65/info.json
index 28adec5eab0e..3d7c71815a4b 100644
--- a/keyboards/aurora65/info.json
+++ b/keyboards/aurora65/info.json
@@ -8,6 +8,11 @@
"pid": "0x4136",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A13", "A10", "A9", "A14", "A15", "B8", "B9", "B2", "B1", "B0", "A0", "A1", "A2", "A3", "A5"],
+ "rows": ["B3", "B4", "B5", "A8", "A4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"community_layouts": ["65_ansi_blocker"],
diff --git a/keyboards/avalanche/v1/config.h b/keyboards/avalanche/v1/config.h
deleted file mode 100644
index 940476e03a64..000000000000
--- a/keyboards/avalanche/v1/config.h
+++ /dev/null
@@ -1,9 +0,0 @@
-// Copyright 2022 Vitaly Volkov (@vlkv)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/avalanche/v1/info.json b/keyboards/avalanche/v1/info.json
index 518a0c074279..e8ce03904f19 100644
--- a/keyboards/avalanche/v1/info.json
+++ b/keyboards/avalanche/v1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"],
+ "rows": ["D4", "C6", "D7", "E6", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D2"
},
diff --git a/keyboards/avalanche/v2/config.h b/keyboards/avalanche/v2/config.h
index 3978f581e1c7..1b6ce7be909c 100644
--- a/keyboards/avalanche/v2/config.h
+++ b/keyboards/avalanche/v2/config.h
@@ -3,11 +3,6 @@
#pragma once
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D3
#define RGBLED_NUM 12
diff --git a/keyboards/avalanche/v2/info.json b/keyboards/avalanche/v2/info.json
index 7105fc17874a..3289a95fafec 100644
--- a/keyboards/avalanche/v2/info.json
+++ b/keyboards/avalanche/v2/info.json
@@ -8,6 +8,11 @@
"pid": "0x0002",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"],
+ "rows": ["D4", "C6", "D7", "E6", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B5", "pin_b": "F4", "resolution": 2}
diff --git a/keyboards/avalanche/v3/config.h b/keyboards/avalanche/v3/config.h
index efe0c2793240..699a7c88fa9b 100644
--- a/keyboards/avalanche/v3/config.h
+++ b/keyboards/avalanche/v3/config.h
@@ -3,11 +3,6 @@
#pragma once
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D3
#define RGBLED_NUM 12
diff --git a/keyboards/avalanche/v3/info.json b/keyboards/avalanche/v3/info.json
index 70ffcc9efc32..27ae1d8a1384 100644
--- a/keyboards/avalanche/v3/info.json
+++ b/keyboards/avalanche/v3/info.json
@@ -8,6 +8,11 @@
"pid": "0x0003",
"device_version": "0.0.3"
},
+ "matrix_pins": {
+ "cols": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"],
+ "rows": ["D4", "C6", "D7", "E6", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B5", "pin_b": "F4", "resolution": 2}
diff --git a/keyboards/avalanche/v4/config.h b/keyboards/avalanche/v4/config.h
index 86dff022e06f..10d9ca889a48 100644
--- a/keyboards/avalanche/v4/config.h
+++ b/keyboards/avalanche/v4/config.h
@@ -3,11 +3,6 @@
#pragma once
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
#ifdef RGBLIGHT_ENABLE
# define RGB_DI_PIN D3
# define RGBLED_NUM 64
diff --git a/keyboards/avalanche/v4/info.json b/keyboards/avalanche/v4/info.json
index 5b31b5ca111d..93207e83b120 100644
--- a/keyboards/avalanche/v4/info.json
+++ b/keyboards/avalanche/v4/info.json
@@ -8,6 +8,11 @@
"pid": "0x0004",
"device_version": "0.0.4"
},
+ "matrix_pins": {
+ "cols": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"],
+ "rows": ["D4", "C6", "D7", "E6", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B5", "pin_b": "F4", "resolution": 2}
diff --git a/keyboards/aves60/config.h b/keyboards/aves60/config.h
index f8a64364ad8a..fef8226df6bb 100644
--- a/keyboards/aves60/config.h
+++ b/keyboards/aves60/config.h
@@ -3,23 +3,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F6, F7, F5, F1, F4 }
-#define MATRIX_COL_PINS { B2, B3, D0, D1, D2, D3, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D5
#ifdef RGB_DI_PIN
#define RGBLED_NUM 9
diff --git a/keyboards/aves60/info.json b/keyboards/aves60/info.json
index 71420c4423b5..3cb54d2180d3 100644
--- a/keyboards/aves60/info.json
+++ b/keyboards/aves60/info.json
@@ -8,6 +8,11 @@
"pid": "0xD408",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "B3", "D0", "D1", "D2", "D3", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F6", "F7", "F5", "F1", "F4"]
+ },
+ "diode_direction": "COL2ROW",
"bootmagic": {
"matrix": [4, 6]
},
diff --git a/keyboards/aves65/config.h b/keyboards/aves65/config.h
index 9037aa13f4a8..00312ff33557 100644
--- a/keyboards/aves65/config.h
+++ b/keyboards/aves65/config.h
@@ -17,15 +17,6 @@ along with this program. If not, see .
#pragma once
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS {D4,D6,D7,B4,E6}
-#define MATRIX_COL_PINS {D0,D1,D2,D3,D5,B5,F0,F1,F4,F5,F6,F7,C7,C6,B6}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/aves65/info.json b/keyboards/aves65/info.json
index 8984465f078e..26e9a7ab4487 100644
--- a/keyboards/aves65/info.json
+++ b/keyboards/aves65/info.json
@@ -8,6 +8,11 @@
"pid": "0x9038",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D0", "D1", "D2", "D3", "D5", "B5", "F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6"],
+ "rows": ["D4", "D6", "D7", "B4", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"qmk_lufa_bootloader": {
"esc_input": "D4",
"esc_output": "D0"
diff --git a/keyboards/axolstudio/foundation_gamma/config.h b/keyboards/axolstudio/foundation_gamma/config.h
deleted file mode 100644
index c6cbb045b395..000000000000
--- a/keyboards/axolstudio/foundation_gamma/config.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
-Copyright 2021 kb-elmo
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { B2, B1, B0, F7, F6, F5 }
-#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0, B3, F4, F1, F0 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/axolstudio/foundation_gamma/info.json b/keyboards/axolstudio/foundation_gamma/info.json
index ecc7bcad90c0..aac82dd20166 100644
--- a/keyboards/axolstudio/foundation_gamma/info.json
+++ b/keyboards/axolstudio/foundation_gamma/info.json
@@ -8,6 +8,11 @@
"pid": "0xE3EB",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0", "B3", "F4", "F1", "F0"],
+ "rows": ["B2", "B1", "B0", "F7", "F6", "F5"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B7"
},
diff --git a/keyboards/axolstudio/helpo/config.h b/keyboards/axolstudio/helpo/config.h
deleted file mode 100644
index 549e53672c13..000000000000
--- a/keyboards/axolstudio/helpo/config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
-Copyright 2020 kb-elmo
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-
-/* Keyboard Matrix Assignments */
-
-#define MATRIX_ROW_PINS { A2, A3, A4, A5 }
-#define MATRIX_COL_PINS { A1, B4, B3, B2, B1 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/axolstudio/helpo/info.json b/keyboards/axolstudio/helpo/info.json
index 1174a32d05bb..c6d1d58f6c57 100644
--- a/keyboards/axolstudio/helpo/info.json
+++ b/keyboards/axolstudio/helpo/info.json
@@ -8,6 +8,11 @@
"pid": "0xC89F",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A1", "B4", "B3", "B2", "B1"],
+ "rows": ["A2", "A3", "A4", "A5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32a",
"bootloader": "usbasploader",
"layouts": {
diff --git a/keyboards/axolstudio/yeti/hotswap/config.h b/keyboards/axolstudio/yeti/hotswap/config.h
index 61f18a8b3a42..694a6449f0f9 100644
--- a/keyboards/axolstudio/yeti/hotswap/config.h
+++ b/keyboards/axolstudio/yeti/hotswap/config.h
@@ -17,15 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* Keyboard Matrix Assignments */
-
-#define MATRIX_ROW_PINS { E6, C6, B4, B5, B6 }
-#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, F0, B0, B1, B2, B3, B7, D2, D3, D5 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/* RGB Matrix */
#ifdef RGB_MATRIX_ENABLE
# define RGB_MATRIX_KEYPRESSES
diff --git a/keyboards/axolstudio/yeti/hotswap/info.json b/keyboards/axolstudio/yeti/hotswap/info.json
index 40aa7b8b704f..064d987d13a6 100644
--- a/keyboards/axolstudio/yeti/hotswap/info.json
+++ b/keyboards/axolstudio/yeti/hotswap/info.json
@@ -8,6 +8,11 @@
"pid": "0x9F9E",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "F7", "F6", "F5", "F4", "F1", "F0", "B0", "B1", "B2", "B3", "B7", "D2", "D3", "D5"],
+ "rows": ["E6", "C6", "B4", "B5", "B6"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/axolstudio/yeti/soldered/config.h b/keyboards/axolstudio/yeti/soldered/config.h
deleted file mode 100644
index 0e31a7113d1e..000000000000
--- a/keyboards/axolstudio/yeti/soldered/config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
-Copyright 2020 kb-elmo
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-
-/* Keyboard Matrix Assignments */
-
-#define MATRIX_ROW_PINS { C7, C6, B6, B5, B4 }
-#define MATRIX_COL_PINS { F6, F5, F4, F1, F0, F7, D7, D6, D4, B3, B7, D0, D1, D2, D3, D5 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
diff --git a/keyboards/axolstudio/yeti/soldered/info.json b/keyboards/axolstudio/yeti/soldered/info.json
index 7bd5d8e09536..0f283bc675a5 100644
--- a/keyboards/axolstudio/yeti/soldered/info.json
+++ b/keyboards/axolstudio/yeti/soldered/info.json
@@ -8,6 +8,11 @@
"pid": "0x9F9F",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F6", "F5", "F4", "F1", "F0", "F7", "D7", "D6", "D4", "B3", "B7", "D0", "D1", "D2", "D3", "D5"],
+ "rows": ["C7", "C6", "B6", "B5", "B4"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["alice", "alice_split_bs"],
diff --git a/keyboards/aya/config.h b/keyboards/aya/config.h
index 56e966ce0fb1..14fc201d4964 100644
--- a/keyboards/aya/config.h
+++ b/keyboards/aya/config.h
@@ -16,10 +16,5 @@
#pragma once
-
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
-#define DIODE_DIRECTION ROW2COL
-
#define SPLIT_HAND_PIN B5
#define USE_I2C
diff --git a/keyboards/aya/info.json b/keyboards/aya/info.json
index 325ab9d72159..d35001e1327b 100644
--- a/keyboards/aya/info.json
+++ b/keyboards/aya/info.json
@@ -8,6 +8,11 @@
"pid": "0x2925",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2"],
+ "rows": ["D4", "C6", "D7", "E6", "B4"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/salicylic_acid3/7skb/rev1/config.h b/keyboards/salicylic_acid3/7skb/rev1/config.h
index b85eee3da2ae..4156fd3aaeee 100644
--- a/keyboards/salicylic_acid3/7skb/rev1/config.h
+++ b/keyboards/salicylic_acid3/7skb/rev1/config.h
@@ -18,12 +18,6 @@ along with this program. If not, see .
#pragma once
-// wiring of each half
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B5 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define SPLIT_HAND_PIN B6
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/salicylic_acid3/7skb/rev1/info.json b/keyboards/salicylic_acid3/7skb/rev1/info.json
index 242135b16c7e..f0bf9b1d980c 100644
--- a/keyboards/salicylic_acid3/7skb/rev1/info.json
+++ b/keyboards/salicylic_acid3/7skb/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0xEB5F",
"device_version": "0.0.7"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B5"],
+ "rows": ["D4", "C6", "D7", "E6", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D2"
},
diff --git a/keyboards/salicylic_acid3/7splus/config.h b/keyboards/salicylic_acid3/7splus/config.h
index 23eae6dac4bd..b4ac29b52de1 100644
--- a/keyboards/salicylic_acid3/7splus/config.h
+++ b/keyboards/salicylic_acid3/7splus/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-
-// wiring of each half
-#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B5 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define SPLIT_HAND_PIN B6
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/salicylic_acid3/7splus/info.json b/keyboards/salicylic_acid3/7splus/info.json
index 7762132ec027..72dcc86573c1 100644
--- a/keyboards/salicylic_acid3/7splus/info.json
+++ b/keyboards/salicylic_acid3/7splus/info.json
@@ -8,6 +8,11 @@
"pid": "0xEAE7",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B5"],
+ "rows": ["D1", "D0", "D4", "C6", "D7", "E6", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D2"
},
diff --git a/keyboards/salicylic_acid3/ajisai74/config.h b/keyboards/salicylic_acid3/ajisai74/config.h
index aa568db0a6ac..8f24db085d10 100644
--- a/keyboards/salicylic_acid3/ajisai74/config.h
+++ b/keyboards/salicylic_acid3/ajisai74/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-
-// wiring of each half
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B5, D3 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define SPLIT_HAND_PIN B6
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/salicylic_acid3/ajisai74/info.json b/keyboards/salicylic_acid3/ajisai74/info.json
index e9b4d6e60e68..8378a1cd5dbd 100644
--- a/keyboards/salicylic_acid3/ajisai74/info.json
+++ b/keyboards/salicylic_acid3/ajisai74/info.json
@@ -8,6 +8,11 @@
"pid": "0xEB54",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B5", "D3"],
+ "rows": ["D4", "C6", "D7", "E6", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D2"
},
diff --git a/keyboards/salicylic_acid3/ergoarrows/config.h b/keyboards/salicylic_acid3/ergoarrows/config.h
index c64ee24098f0..150c2f4dccf1 100644
--- a/keyboards/salicylic_acid3/ergoarrows/config.h
+++ b/keyboards/salicylic_acid3/ergoarrows/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-
-// wiring of each half
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define SPLIT_HAND_PIN B6
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/salicylic_acid3/ergoarrows/info.json b/keyboards/salicylic_acid3/ergoarrows/info.json
index 9396eca3675c..6d0282fdd687 100644
--- a/keyboards/salicylic_acid3/ergoarrows/info.json
+++ b/keyboards/salicylic_acid3/ergoarrows/info.json
@@ -8,6 +8,11 @@
"pid": "0xEA54",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2"],
+ "rows": ["D4", "C6", "D7", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/salicylic_acid3/getta25/rev1/config.h b/keyboards/salicylic_acid3/getta25/rev1/config.h
index 479aa6c3f729..d004f287df76 100644
--- a/keyboards/salicylic_acid3/getta25/rev1/config.h
+++ b/keyboards/salicylic_acid3/getta25/rev1/config.h
@@ -18,13 +18,6 @@ along with this program. If not, see .
#pragma once
-// wiring of each half
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B2 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/salicylic_acid3/getta25/rev1/info.json b/keyboards/salicylic_acid3/getta25/rev1/info.json
index 744354070491..33f5822449c5 100644
--- a/keyboards/salicylic_acid3/getta25/rev1/info.json
+++ b/keyboards/salicylic_acid3/getta25/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x3060",
"device_version": "0.1.3"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3"],
+ "rows": ["D4", "C6", "D7", "E6", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/salicylic_acid3/jisplit89/rev1/config.h b/keyboards/salicylic_acid3/jisplit89/rev1/config.h
index 65b373f1681f..70e81ae77496 100644
--- a/keyboards/salicylic_acid3/jisplit89/rev1/config.h
+++ b/keyboards/salicylic_acid3/jisplit89/rev1/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-// wiring of each half
-#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B5 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define SPLIT_HAND_PIN B6
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/salicylic_acid3/jisplit89/rev1/info.json b/keyboards/salicylic_acid3/jisplit89/rev1/info.json
index 53f61f87f2d3..33488610b803 100644
--- a/keyboards/salicylic_acid3/jisplit89/rev1/info.json
+++ b/keyboards/salicylic_acid3/jisplit89/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0xEB4F",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B5"],
+ "rows": ["D1", "D0", "D4", "C6", "D7", "E6", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D2"
},
diff --git a/keyboards/salicylic_acid3/nafuda/config.h b/keyboards/salicylic_acid3/nafuda/config.h
index f9312912ce4f..4d7fc6297be1 100644
--- a/keyboards/salicylic_acid3/nafuda/config.h
+++ b/keyboards/salicylic_acid3/nafuda/config.h
@@ -18,13 +18,6 @@ along with this program. If not, see .
#pragma once
-
-// wiring of each half
-#define MATRIX_ROW_PINS { D1, D0, D4 }
-#define MATRIX_COL_PINS { F4, F5, F6 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/salicylic_acid3/nafuda/info.json b/keyboards/salicylic_acid3/nafuda/info.json
index 05cf322ccf73..3cef936a33b2 100644
--- a/keyboards/salicylic_acid3/nafuda/info.json
+++ b/keyboards/salicylic_acid3/nafuda/info.json
@@ -8,6 +8,11 @@
"pid": "0x3060",
"device_version": "0.1.2"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6"],
+ "rows": ["D1", "D0", "D4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/salicylic_acid3/naked48/rev1/config.h b/keyboards/salicylic_acid3/naked48/rev1/config.h
index 8adf11f4dfc9..3f1c2f9ca5ba 100644
--- a/keyboards/salicylic_acid3/naked48/rev1/config.h
+++ b/keyboards/salicylic_acid3/naked48/rev1/config.h
@@ -17,15 +17,6 @@ along with this program. If not, see .
#pragma once
-// wiring of each half
-#define MATRIX_ROW_PINS { D1, D0, D4, C6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D7, E6, B4, B5 }
-// When using Nafuda, comment out MATRIX_ROW_PINS_RIGHT and MATRIX_COL_PINS_RIGHT.
-#define MATRIX_ROW_PINS_RIGHT { D4, C6, D7, E6 }
-#define MATRIX_COL_PINS_RIGHT { F4, F5, F6, F7, B1, B3, B2, B6, B4, B5, B2, B2 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/salicylic_acid3/naked48/rev1/info.json b/keyboards/salicylic_acid3/naked48/rev1/info.json
index 5dc05a02d050..96d81a7e716d 100644
--- a/keyboards/salicylic_acid3/naked48/rev1/info.json
+++ b/keyboards/salicylic_acid3/naked48/rev1/info.json
@@ -8,8 +8,19 @@
"pid": "0xE8BA",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6", "D7", "E6", "B4", "B5"],
+ "rows": ["D1", "D0", "D4", "C6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
- "soft_serial_pin": "D2"
+ "soft_serial_pin": "D2",
+ "matrix_pins": {
+ "right": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6", "B4", "B5", "B2", "B2"],
+ "rows": ["D4", "C6", "D7", "E6"]
+ }
+ }
},
"processor": "atmega32u4",
"bootloader": "caterina",
diff --git a/keyboards/salicylic_acid3/naked60/rev1/config.h b/keyboards/salicylic_acid3/naked60/rev1/config.h
index d7e3f223eab4..2f62289261b5 100644
--- a/keyboards/salicylic_acid3/naked60/rev1/config.h
+++ b/keyboards/salicylic_acid3/naked60/rev1/config.h
@@ -17,18 +17,6 @@ along with this program. If not, see .
#pragma once
-// Rows are doubled-up
-#define MATRIX_ROW_PINS { B6, D1, D0, D4, C6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, D7, E6, B4, B5, D3 }
-// When using Setta21
-#define MATRIX_ROW_PINS_RIGHT { D4, C6, D7, E6, B2 }
-#define MATRIX_COL_PINS_RIGHT { F4, F5, F6, F7, B1, B3, B2, B6, B4, B5, B2, B2 }
-// When using Nafuda
-//#define MATRIX_ROW_PINS_RIGHT { D1, D0, D4, C6, B6 }
-//#define MATRIX_COL_PINS_RIGHT { F4, F5, F6, F7, B1, B3, B2, D7, E6, B4, B5, D3 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/salicylic_acid3/naked60/rev1/info.json b/keyboards/salicylic_acid3/naked60/rev1/info.json
index 2f46e127ea05..92da4070a582 100644
--- a/keyboards/salicylic_acid3/naked60/rev1/info.json
+++ b/keyboards/salicylic_acid3/naked60/rev1/info.json
@@ -8,8 +8,19 @@
"pid": "0xEB5C",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "D7", "E6", "B4", "B5", "D3"],
+ "rows": ["B6", "D1", "D0", "D4", "C6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
- "soft_serial_pin": "D2"
+ "soft_serial_pin": "D2",
+ "matrix_pins": {
+ "right": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6", "B4", "B5", "B2", "B2"],
+ "rows": ["D4", "C6", "D7", "E6", "B2"]
+ }
+ }
},
"processor": "atmega32u4",
"bootloader": "caterina",
diff --git a/keyboards/salicylic_acid3/naked64/rev1/config.h b/keyboards/salicylic_acid3/naked64/rev1/config.h
index 11031a4f2577..4d991f2ea3c3 100644
--- a/keyboards/salicylic_acid3/naked64/rev1/config.h
+++ b/keyboards/salicylic_acid3/naked64/rev1/config.h
@@ -18,14 +18,6 @@ along with this program. If not, see .
#pragma once
-// wiring of each half
-#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, D3 }
-#define MATRIX_ROW_PINS_RIGHT { D4, C6, D7, E6, B4, B5, B2, B2 }
-#define MATRIX_COL_PINS_RIGHT { F4, F5, F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/salicylic_acid3/naked64/rev1/info.json b/keyboards/salicylic_acid3/naked64/rev1/info.json
index 52a7c2906ed6..2416e063d966 100644
--- a/keyboards/salicylic_acid3/naked64/rev1/info.json
+++ b/keyboards/salicylic_acid3/naked64/rev1/info.json
@@ -8,8 +8,19 @@
"pid": "0x3060",
"device_version": "0.0.3"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "D3"],
+ "rows": ["D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
- "soft_serial_pin": "D2"
+ "soft_serial_pin": "D2",
+ "matrix_pins": {
+ "right": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"],
+ "rows": ["D4", "C6", "D7", "E6", "B4", "B5", "B2", "B2"]
+ }
+ }
},
"processor": "atmega32u4",
"bootloader": "caterina",
diff --git a/keyboards/salicylic_acid3/nknl7en/config.h b/keyboards/salicylic_acid3/nknl7en/config.h
index 43e7cfb2225a..24acc89bcfe4 100644
--- a/keyboards/salicylic_acid3/nknl7en/config.h
+++ b/keyboards/salicylic_acid3/nknl7en/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-
-// wiring of each half
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B5, D2 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define SPLIT_HAND_PIN B6
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/salicylic_acid3/nknl7en/info.json b/keyboards/salicylic_acid3/nknl7en/info.json
index 06d915c2f411..c36278aa4701 100644
--- a/keyboards/salicylic_acid3/nknl7en/info.json
+++ b/keyboards/salicylic_acid3/nknl7en/info.json
@@ -8,6 +8,11 @@
"pid": "0xEA56",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B5", "D2"],
+ "rows": ["D4", "C6", "D7", "E6", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/salicylic_acid3/nknl7jp/config.h b/keyboards/salicylic_acid3/nknl7jp/config.h
index 69ef56fe6e68..3c8fca5ab005 100644
--- a/keyboards/salicylic_acid3/nknl7jp/config.h
+++ b/keyboards/salicylic_acid3/nknl7jp/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-
-// wiring of each half
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B5, D2 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define SPLIT_HAND_PIN B6
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/salicylic_acid3/nknl7jp/info.json b/keyboards/salicylic_acid3/nknl7jp/info.json
index 7338cb15fe55..b2f07e233a3f 100644
--- a/keyboards/salicylic_acid3/nknl7jp/info.json
+++ b/keyboards/salicylic_acid3/nknl7jp/info.json
@@ -8,6 +8,11 @@
"pid": "0xEA55",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B5", "D2"],
+ "rows": ["D4", "C6", "D7", "E6", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/salicylic_acid3/setta21/rev1/config.h b/keyboards/salicylic_acid3/setta21/rev1/config.h
index 6672b0014c8d..26f1bf26610d 100644
--- a/keyboards/salicylic_acid3/setta21/rev1/config.h
+++ b/keyboards/salicylic_acid3/setta21/rev1/config.h
@@ -18,12 +18,6 @@ along with this program. If not, see .
#pragma once
-// wiring of each half
-#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/salicylic_acid3/setta21/rev1/info.json b/keyboards/salicylic_acid3/setta21/rev1/info.json
index a798c25e634e..b4013093cd31 100644
--- a/keyboards/salicylic_acid3/setta21/rev1/info.json
+++ b/keyboards/salicylic_acid3/setta21/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x3060",
"device_version": "0.1.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3"],
+ "rows": ["D4", "C6", "D7", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"community_layouts": ["numpad_6x4"],
diff --git a/keyboards/sam/s80/config.h b/keyboards/sam/s80/config.h
index 0a235bd36c1d..3d6d768957fe 100644
--- a/keyboards/sam/s80/config.h
+++ b/keyboards/sam/s80/config.h
@@ -16,22 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { E6, B0, B1, B2, B3, B7, F7, F6, F5, F4, F1 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4 }
-
-#define DIODE_DIRECTION ROW2COL
-
#define RGB_DI_PIN E2
#ifdef RGB_DI_PIN
# define RGBLED_NUM 20
diff --git a/keyboards/sam/s80/info.json b/keyboards/sam/s80/info.json
index ab0cde43a1de..dd03cf3098d7 100644
--- a/keyboards/sam/s80/info.json
+++ b/keyboards/sam/s80/info.json
@@ -8,6 +8,11 @@
"pid": "0x3830",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4"],
+ "rows": ["E6", "B0", "B1", "B2", "B3", "B7", "F7", "F6", "F5", "F4", "F1"]
+ },
+ "diode_direction": "ROW2COL",
"backlight": {
"pin": "B6"
},
diff --git a/keyboards/sam/sg81m/config.h b/keyboards/sam/sg81m/config.h
index 7cfba55dc88b..946649d03824 100644
--- a/keyboards/sam/sg81m/config.h
+++ b/keyboards/sam/sg81m/config.h
@@ -16,21 +16,6 @@
#pragma once
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { B7, B6, B5, B4, C7, C6, D0, D1, D2, D3, D4, D5, D6, D7 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN E6 //reserved pin for potential underglow rgb
#ifdef RGB_DI_PIN
#define RGBLED_NUM 10
diff --git a/keyboards/sam/sg81m/info.json b/keyboards/sam/sg81m/info.json
index ebf5dda94734..9f741abeff95 100644
--- a/keyboards/sam/sg81m/info.json
+++ b/keyboards/sam/sg81m/info.json
@@ -8,6 +8,11 @@
"pid": "0x3831",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B7", "B6", "B5", "B4", "C7", "C6", "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7"],
+ "rows": ["F0", "F1", "F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B0"
},
diff --git a/keyboards/sanctified/dystopia/config.h b/keyboards/sanctified/dystopia/config.h
deleted file mode 100644
index 1ab243f5ed40..000000000000
--- a/keyboards/sanctified/dystopia/config.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Copyright 2021 Quentin Melis
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-
-#pragma once
-
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { B2, B3, E6, D5, D3 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, D4, D6, D7, B4 }
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/sanctified/dystopia/info.json b/keyboards/sanctified/dystopia/info.json
index 3c0814074e53..c71f327f6a59 100644
--- a/keyboards/sanctified/dystopia/info.json
+++ b/keyboards/sanctified/dystopia/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "D4", "D6", "D7", "B4"],
+ "rows": ["B2", "B3", "E6", "D5", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/sandwich/keeb68/config.h b/keyboards/sandwich/keeb68/config.h
index d12d01cb38db..fdd0cd8c8641 100644
--- a/keyboards/sandwich/keeb68/config.h
+++ b/keyboards/sandwich/keeb68/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
-#define MATRIX_COL_PINS { B6, C6, F7, E6, B7, D0, D1, D2, D3, D4, D6, D7, B4, B5 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/sandwich/keeb68/info.json b/keyboards/sandwich/keeb68/info.json
index ed30bd810a0a..c4e875299711 100644
--- a/keyboards/sandwich/keeb68/info.json
+++ b/keyboards/sandwich/keeb68/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "C6", "F7", "E6", "B7", "D0", "D1", "D2", "D3", "D4", "D6", "D7", "B4", "B5"],
+ "rows": ["F0", "F1", "F4", "F5", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "C7",
"levels": 5,
diff --git a/keyboards/satt/vision/config.h b/keyboards/satt/vision/config.h
index 6617b6ef13cd..4b007cf387ee 100644
--- a/keyboards/satt/vision/config.h
+++ b/keyboards/satt/vision/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see .
#pragma once
-#define MATRIX_COL_PINS { B1, B0, A7, A6, A5, A4, A3, B8, B7, B6, B5, B4, B3, A15 }
-#define MATRIX_ROW_PINS { B12, B2, A2, A1 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/satt/vision/info.json b/keyboards/satt/vision/info.json
index fcca710f19bc..15977a589280 100644
--- a/keyboards/satt/vision/info.json
+++ b/keyboards/satt/vision/info.json
@@ -8,6 +8,11 @@
"pid": "0x5649",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B1", "B0", "A7", "A6", "A5", "A4", "A3", "B8", "B7", "B6", "B5", "B4", "B3", "A15"],
+ "rows": ["B12", "B2", "A2", "A1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/sauce/mild/config.h b/keyboards/sauce/mild/config.h
index abe48866337e..037c0b0a2323 100644
--- a/keyboards/sauce/mild/config.h
+++ b/keyboards/sauce/mild/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { C13, C14, C15, A15, F0, F1 }
-#define MATRIX_COL_PINS { A10, A9, A8, B11, B10, B2, B1, B0, A7, A5, A4, A3, A2, A1, B6, B5, B4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/sauce/mild/info.json b/keyboards/sauce/mild/info.json
index 90b36d48f86e..71179445ee76 100644
--- a/keyboards/sauce/mild/info.json
+++ b/keyboards/sauce/mild/info.json
@@ -8,6 +8,11 @@
"pid": "0x7783",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A10", "A9", "A8", "B11", "B10", "B2", "B1", "B0", "A7", "A5", "A4", "A3", "A2", "A1", "B6", "B5", "B4"],
+ "rows": ["C13", "C14", "C15", "A15", "F0", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "A6",
"scroll_lock": "B14"
diff --git a/keyboards/sawnsprojects/amber80/solder/config.h b/keyboards/sawnsprojects/amber80/solder/config.h
index 53a07a179c2b..a20ec04bdb73 100644
--- a/keyboards/sawnsprojects/amber80/solder/config.h
+++ b/keyboards/sawnsprojects/amber80/solder/config.h
@@ -16,22 +16,6 @@
#pragma once
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B1, B2, B3, B7, D0, D1, F1, F0, D7, B4, D5, D3 }
-#define MATRIX_COL_PINS { F4, F6, F7, C7, C6, B6, B5, D6, D4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* RGB */
#define RGB_DI_PIN D2
#ifdef RGB_DI_PIN
diff --git a/keyboards/sawnsprojects/amber80/solder/info.json b/keyboards/sawnsprojects/amber80/solder/info.json
index 1e9870fa9060..3cd4c7c96d51 100644
--- a/keyboards/sawnsprojects/amber80/solder/info.json
+++ b/keyboards/sawnsprojects/amber80/solder/info.json
@@ -8,6 +8,11 @@
"pid": "0xA801",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F6", "F7", "C7", "C6", "B6", "B5", "D6", "D4"],
+ "rows": ["B1", "B2", "B3", "B7", "D0", "D1", "F1", "F0", "D7", "B4", "D5", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "F5",
"scroll_lock": "B0",
diff --git a/keyboards/sawnsprojects/krush/krush60/solder/config.h b/keyboards/sawnsprojects/krush/krush60/solder/config.h
index 76f4acfbf6fb..6a5ac54353e4 100644
--- a/keyboards/sawnsprojects/krush/krush60/solder/config.h
+++ b/keyboards/sawnsprojects/krush/krush60/solder/config.h
@@ -16,13 +16,6 @@
#pragma once
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B1, B2, D1, D2, D4, D6, F6, F7, F5, F4 }
-#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D5, D3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN F1
#ifdef RGB_DI_PIN
#define RGBLED_NUM 20
diff --git a/keyboards/sawnsprojects/krush/krush60/solder/info.json b/keyboards/sawnsprojects/krush/krush60/solder/info.json
index a54172480db4..380fa706b019 100644
--- a/keyboards/sawnsprojects/krush/krush60/solder/info.json
+++ b/keyboards/sawnsprojects/krush/krush60/solder/info.json
@@ -8,6 +8,11 @@
"pid": "0x6B32",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "C6", "B6", "B5", "B4", "D7", "D5", "D3"],
+ "rows": ["B1", "B2", "D1", "D2", "D4", "D6", "F6", "F7", "F5", "F4"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "F0",
"on_state": 0
diff --git a/keyboards/sawnsprojects/krush/krush65/hotswap/config.h b/keyboards/sawnsprojects/krush/krush65/hotswap/config.h
index 8a947093dc95..ef7cb2628932 100644
--- a/keyboards/sawnsprojects/krush/krush65/hotswap/config.h
+++ b/keyboards/sawnsprojects/krush/krush65/hotswap/config.h
@@ -16,13 +16,6 @@
#pragma once
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B1, B2, D4, F1, F0 }
-#define MATRIX_COL_PINS { B7, B3, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D0, D5, D6, D3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Encoders */
#define ENCODERS_CW_KEY { { 12, 3 } }
diff --git a/keyboards/sawnsprojects/krush/krush65/hotswap/info.json b/keyboards/sawnsprojects/krush/krush65/hotswap/info.json
index 3872047ef8b9..94a091b0f822 100644
--- a/keyboards/sawnsprojects/krush/krush65/hotswap/info.json
+++ b/keyboards/sawnsprojects/krush/krush65/hotswap/info.json
@@ -8,6 +8,11 @@
"pid": "0x5B31",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B7", "B3", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D0", "D5", "D6", "D3"],
+ "rows": ["B1", "B2", "D4", "F1", "F0"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D1", "pin_b": "D2"}
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/config.h b/keyboards/sawnsprojects/krush/krush65/solder/config.h
index 76f4acfbf6fb..6a5ac54353e4 100644
--- a/keyboards/sawnsprojects/krush/krush65/solder/config.h
+++ b/keyboards/sawnsprojects/krush/krush65/solder/config.h
@@ -16,13 +16,6 @@
#pragma once
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B1, B2, D1, D2, D4, D6, F6, F7, F5, F4 }
-#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D5, D3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN F1
#ifdef RGB_DI_PIN
#define RGBLED_NUM 20
diff --git a/keyboards/sawnsprojects/krush/krush65/solder/info.json b/keyboards/sawnsprojects/krush/krush65/solder/info.json
index 96661272996c..cf337c55f50e 100644
--- a/keyboards/sawnsprojects/krush/krush65/solder/info.json
+++ b/keyboards/sawnsprojects/krush/krush65/solder/info.json
@@ -8,6 +8,11 @@
"pid": "0x6B31",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "C6", "B6", "B5", "B4", "D7", "D5", "D3"],
+ "rows": ["B1", "B2", "D1", "D2", "D4", "D6", "F6", "F7", "F5", "F4"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D0", "pin_b": "B3"}
diff --git a/keyboards/sawnsprojects/satxri6key/config.h b/keyboards/sawnsprojects/satxri6key/config.h
index f0c527387d4d..a5f61e98e782 100644
--- a/keyboards/sawnsprojects/satxri6key/config.h
+++ b/keyboards/sawnsprojects/satxri6key/config.h
@@ -16,22 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F7, F6 }
-#define MATRIX_COL_PINS { F1, F4, F5 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN F0
#ifdef RGB_DI_PIN
#define RGBLED_NUM 6
diff --git a/keyboards/sawnsprojects/satxri6key/info.json b/keyboards/sawnsprojects/satxri6key/info.json
index 50c304dda258..f2db2dedc46e 100644
--- a/keyboards/sawnsprojects/satxri6key/info.json
+++ b/keyboards/sawnsprojects/satxri6key/info.json
@@ -8,6 +8,11 @@
"pid": "0x0727",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F1", "F4", "F5"],
+ "rows": ["F7", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/sawnsprojects/vcl65/solder/config.h b/keyboards/sawnsprojects/vcl65/solder/config.h
index bd4258f12ad5..5cb0b63ba945 100644
--- a/keyboards/sawnsprojects/vcl65/solder/config.h
+++ b/keyboards/sawnsprojects/vcl65/solder/config.h
@@ -16,13 +16,6 @@
#pragma once
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F6, F7, F0, F4, B1 }
-#define MATRIX_COL_PINS { B2, B5, F5, C7, B4, C6, D7, D6, D4, D5, D3, D2, B6, D1, D0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN B7
#ifdef RGB_DI_PIN
#define RGBLED_NUM 20
diff --git a/keyboards/sawnsprojects/vcl65/solder/info.json b/keyboards/sawnsprojects/vcl65/solder/info.json
index 1b0c638ecc2d..617851ba0026 100644
--- a/keyboards/sawnsprojects/vcl65/solder/info.json
+++ b/keyboards/sawnsprojects/vcl65/solder/info.json
@@ -8,6 +8,11 @@
"pid": "0x1727",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "B5", "F5", "C7", "B4", "C6", "D7", "D6", "D4", "D5", "D3", "D2", "B6", "D1", "D0"],
+ "rows": ["F6", "F7", "F0", "F4", "B1"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "F1",
"on_state": 0
diff --git a/keyboards/scatter42/config.h b/keyboards/scatter42/config.h
index 564a2451fd4d..2021cca3b0fe 100644
--- a/keyboards/scatter42/config.h
+++ b/keyboards/scatter42/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/scatter42/info.json b/keyboards/scatter42/info.json
index f928b4c24c97..748093a516ec 100644
--- a/keyboards/scatter42/info.json
+++ b/keyboards/scatter42/info.json
@@ -8,6 +8,11 @@
"pid": "0x3B47",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3"],
+ "rows": ["D4", "C6", "D7", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D2"
},
diff --git a/keyboards/sck/gtm/config.h b/keyboards/sck/gtm/config.h
index f4961f224259..a99fc7a3e8fc 100644
--- a/keyboards/sck/gtm/config.h
+++ b/keyboards/sck/gtm/config.h
@@ -1,13 +1,5 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { C4, C5, D1 }
-#define MATRIX_COL_PINS { B4, B5, B6, B7, C7, D0 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/sck/gtm/info.json b/keyboards/sck/gtm/info.json
index 3f254f2c778f..c3cc44cd64fe 100644
--- a/keyboards/sck/gtm/info.json
+++ b/keyboards/sck/gtm/info.json
@@ -8,6 +8,11 @@
"pid": "0x6090",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["B4", "B5", "B6", "B7", "C7", "D0"],
+ "rows": ["C4", "C5", "D1"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D2", "pin_b": "D3", "resolution": 1}
diff --git a/keyboards/sck/m0116b/config.h b/keyboards/sck/m0116b/config.h
index f76b93ff6873..a3c400ab4788 100644
--- a/keyboards/sck/m0116b/config.h
+++ b/keyboards/sck/m0116b/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D1, F0, F1, F4, F5, F6 }
-#define MATRIX_COL_PINS { D5, D3, D2, D0, B3, B2, B1, B0, E6, B5, B6, C6, C7, F7, D4, D6, D7, B4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/sck/m0116b/info.json b/keyboards/sck/m0116b/info.json
index 8588e9d60590..8a2c4d109a4f 100644
--- a/keyboards/sck/m0116b/info.json
+++ b/keyboards/sck/m0116b/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D5", "D3", "D2", "D0", "B3", "B2", "B1", "B0", "E6", "B5", "B6", "C6", "C7", "F7", "D4", "D6", "D7", "B4"],
+ "rows": ["D1", "F0", "F1", "F4", "F5", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"bootmagic": {
"matrix": [0, 6]
},
diff --git a/keyboards/sck/neiso/config.h b/keyboards/sck/neiso/config.h
index 21a4f0d60cee..a3c400ab4788 100644
--- a/keyboards/sck/neiso/config.h
+++ b/keyboards/sck/neiso/config.h
@@ -17,25 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS \
- { F4 }
-#define MATRIX_COL_PINS \
- { B3, D2, F5, F7, B4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/sck/neiso/info.json b/keyboards/sck/neiso/info.json
index 3140669af584..2f233b4066c3 100644
--- a/keyboards/sck/neiso/info.json
+++ b/keyboards/sck/neiso/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B3", "D2", "F5", "F7", "B4"],
+ "rows": ["F4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/sck/osa/config.h b/keyboards/sck/osa/config.h
index 801a7fdc16ea..b81c970db780 100644
--- a/keyboards/sck/osa/config.h
+++ b/keyboards/sck/osa/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, B0, B1, B2, B3, B7 }
-#define MATRIX_COL_PINS { B4, D7, D5, D3, D2, D0, D1, B5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D4
#ifdef RGB_DI_PIN
#define RGBLED_NUM 9
diff --git a/keyboards/sck/osa/info.json b/keyboards/sck/osa/info.json
index c919d3b6e8d1..547363e4141f 100644
--- a/keyboards/sck/osa/info.json
+++ b/keyboards/sck/osa/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B4", "D7", "D5", "D3", "D2", "D0", "D1", "B5"],
+ "rows": ["F0", "F1", "F4", "F5", "F6", "B0", "B1", "B2", "B3", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "C6",
"num_lock": "C7",
diff --git a/keyboards/sendyyeah/75pixels/config.h b/keyboards/sendyyeah/75pixels/config.h
deleted file mode 100644
index 5f5bc38b34c8..000000000000
--- a/keyboards/sendyyeah/75pixels/config.h
+++ /dev/null
@@ -1,27 +0,0 @@
- /* Copyright 2021 sendyyeah
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- */
-#define MATRIX_ROW_PINS { B6, F4, F5, F6, F7, B1, B3, B2, B4, B5 }
-#define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, E6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/sendyyeah/75pixels/info.json b/keyboards/sendyyeah/75pixels/info.json
index 81ced955d699..aeaf26da6c93 100644
--- a/keyboards/sendyyeah/75pixels/info.json
+++ b/keyboards/sendyyeah/75pixels/info.json
@@ -8,6 +8,11 @@
"pid": "0x3735",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D3", "D2", "D1", "D0", "D4", "C6", "D7", "E6"],
+ "rows": ["B6", "F4", "F5", "F6", "F7", "B1", "B3", "B2", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"community_layouts": ["ortho_5x15"],
diff --git a/keyboards/sendyyeah/bevi/config.h b/keyboards/sendyyeah/bevi/config.h
deleted file mode 100644
index 7ef151b3bdf2..000000000000
--- a/keyboards/sendyyeah/bevi/config.h
+++ /dev/null
@@ -1,27 +0,0 @@
- /* Copyright 2021 sendyyeah
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- */
-#define MATRIX_ROW_PINS { B3, B2, D3, D2, D1, D0, D4, C6, D7, E6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B6, B4, B5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/sendyyeah/bevi/info.json b/keyboards/sendyyeah/bevi/info.json
index 355fe1f85098..b4a62656a244 100644
--- a/keyboards/sendyyeah/bevi/info.json
+++ b/keyboards/sendyyeah/bevi/info.json
@@ -8,6 +8,11 @@
"pid": "0x4256",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B6", "B4", "B5"],
+ "rows": ["B3", "B2", "D3", "D2", "D1", "D0", "D4", "C6", "D7", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/senselessclay/ck60/config.h b/keyboards/senselessclay/ck60/config.h
index a5da1ed51e6d..5c4153e3d004 100644
--- a/keyboards/senselessclay/ck60/config.h
+++ b/keyboards/senselessclay/ck60/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { B3, B2, F1, F4, F5 }
-#define MATRIX_COL_PINS { F0, D5, D3, D2, D1, D0, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* RGB matrix lighting */
#define RGB_DI_PIN B1
#define RGB_MATRIX_LED_COUNT 62
diff --git a/keyboards/senselessclay/ck60/info.json b/keyboards/senselessclay/ck60/info.json
index d089aa333c3e..45e84f254ba2 100644
--- a/keyboards/senselessclay/ck60/info.json
+++ b/keyboards/senselessclay/ck60/info.json
@@ -8,6 +8,11 @@
"pid": "0x0601",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "D5", "D3", "D2", "D1", "D0", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["B3", "B2", "F1", "F4", "F5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/senselessclay/ck65/config.h b/keyboards/senselessclay/ck65/config.h
index 5aeeee7a744c..2d2326fb40bf 100644
--- a/keyboards/senselessclay/ck65/config.h
+++ b/keyboards/senselessclay/ck65/config.h
@@ -17,25 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-/* rev0 */
-#define MATRIX_ROW_PINS { B3, B2, F1, F4, F5 }
-#define MATRIX_COL_PINS { F0, D5, D3, D2, D1, D0, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/senselessclay/ck65/info.json b/keyboards/senselessclay/ck65/info.json
index cb596c21e28c..7bc2839a9f1e 100644
--- a/keyboards/senselessclay/ck65/info.json
+++ b/keyboards/senselessclay/ck65/info.json
@@ -8,6 +8,11 @@
"pid": "0x0651",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "D5", "D3", "D2", "D1", "D0", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["B3", "B2", "F1", "F4", "F5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/senselessclay/gos65/config.h b/keyboards/senselessclay/gos65/config.h
index 22dadfed74eb..02d27c11e6a1 100644
--- a/keyboards/senselessclay/gos65/config.h
+++ b/keyboards/senselessclay/gos65/config.h
@@ -17,30 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-/* rev0 */
-/*
-#define MATRIX_ROW_PINS { B1, B2, F6, F5, F4 }
-#define MATRIX_COL_PINS { F1, D5, D3, D2, D1, D0, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
-*/
-/* rev1 */
-#define MATRIX_ROW_PINS { B1, B2, F1, F6, F5 }
-#define MATRIX_COL_PINS { F4, D5, D3, D2, D1, D0, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/senselessclay/gos65/info.json b/keyboards/senselessclay/gos65/info.json
index b1007fe065b6..bdd73caed4b1 100644
--- a/keyboards/senselessclay/gos65/info.json
+++ b/keyboards/senselessclay/gos65/info.json
@@ -8,6 +8,11 @@
"pid": "0x0650",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "D5", "D3", "D2", "D1", "D0", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["B1", "B2", "F1", "F6", "F5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/senselessclay/had60/config.h b/keyboards/senselessclay/had60/config.h
index 01d85c051717..bdeea958dc72 100644
--- a/keyboards/senselessclay/had60/config.h
+++ b/keyboards/senselessclay/had60/config.h
@@ -17,28 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-/* rev0 */
-//#define MATRIX_ROW_PINS { F0, D0, D4, F5, F4 }
-//#define MATRIX_COL_PINS { F1, D5, D3, D2, D1, F6, F7, C7, C6, B6, B5, B4, D7, D6 }
-/* rev1 */
-#define MATRIX_ROW_PINS { F1, F0, F7, F6, F5 }
-#define MATRIX_COL_PINS { F4, D5, D3, D2, D1, D0, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/senselessclay/had60/info.json b/keyboards/senselessclay/had60/info.json
index a5a46d0cd5dd..f76a1355ee7d 100644
--- a/keyboards/senselessclay/had60/info.json
+++ b/keyboards/senselessclay/had60/info.json
@@ -8,6 +8,11 @@
"pid": "0x060F",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "D5", "D3", "D2", "D1", "D0", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F1", "F0", "F7", "F6", "F5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/sentraq/number_pad/config.h b/keyboards/sentraq/number_pad/config.h
index 0d96be0bafda..fe49e0c52109 100644
--- a/keyboards/sentraq/number_pad/config.h
+++ b/keyboards/sentraq/number_pad/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F5, F0, B5, D6, D4 }
-#define MATRIX_COL_PINS { C7, D5, D1, D0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN B0
#ifdef RGB_DI_PIN
#define RGBLED_NUM 13
diff --git a/keyboards/sentraq/number_pad/info.json b/keyboards/sentraq/number_pad/info.json
index 5b7af3fb0f34..a5db65d78b73 100644
--- a/keyboards/sentraq/number_pad/info.json
+++ b/keyboards/sentraq/number_pad/info.json
@@ -7,6 +7,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "D5", "D1", "D0"],
+ "rows": ["F5", "F0", "B5", "D6", "D4"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7"
},
diff --git a/keyboards/sentraq/s60_x/default/config.h b/keyboards/sentraq/s60_x/default/config.h
index 01ce1f2e6507..1fa22a6e9db1 100644
--- a/keyboards/sentraq/s60_x/default/config.h
+++ b/keyboards/sentraq/s60_x/default/config.h
@@ -1,19 +1,11 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F1 }
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/sentraq/s60_x/default/info.json b/keyboards/sentraq/s60_x/default/info.json
index ae5728a679e0..78e8827c0080 100644
--- a/keyboards/sentraq/s60_x/default/info.json
+++ b/keyboards/sentraq/s60_x/default/info.json
@@ -1,5 +1,10 @@
{
"keyboard_name": "S60-X",
+ "matrix_pins": {
+ "cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "E6", "F1"],
+ "rows": ["B7", "B3", "B2", "B1", "B0"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"breathing": true
diff --git a/keyboards/sentraq/s60_x/rgb/config.h b/keyboards/sentraq/s60_x/rgb/config.h
index 2332b484e152..85f6271c3223 100644
--- a/keyboards/sentraq/s60_x/rgb/config.h
+++ b/keyboards/sentraq/s60_x/rgb/config.h
@@ -1,19 +1,11 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B5, B4, D7, D6, D4 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, B6, C6, C7, F1, F0, E6, B3, B2, B1, B0 }
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN F6
#ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/sentraq/s60_x/rgb/info.json b/keyboards/sentraq/s60_x/rgb/info.json
index 6420a8069a88..0c6aba4ac655 100644
--- a/keyboards/sentraq/s60_x/rgb/info.json
+++ b/keyboards/sentraq/s60_x/rgb/info.json
@@ -1,5 +1,10 @@
{
"keyboard_name": "S60-X-RGB",
+ "matrix_pins": {
+ "cols": ["D0", "D1", "D2", "D3", "D5", "B6", "C6", "C7", "F1", "F0", "E6", "B3", "B2", "B1", "B0"],
+ "rows": ["B5", "B4", "D7", "D6", "D4"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"breathing": true
diff --git a/keyboards/sentraq/s65_plus/config.h b/keyboards/sentraq/s65_plus/config.h
index 3b8323074f8a..ea97d48f843b 100644
--- a/keyboards/sentraq/s65_plus/config.h
+++ b/keyboards/sentraq/s65_plus/config.h
@@ -1,10 +1,5 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { C7, C6, B6, B5, B4 }
-#define MATRIX_COL_PINS { F6, F5, F4, F1, F0, E6, B0, B1, D5, B2, B3, D0, D1, D2, D4, D6, D7, F7 }
-
#define RGB_DI_PIN D3
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
@@ -22,9 +17,6 @@
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 20
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/sentraq/s65_plus/info.json b/keyboards/sentraq/s65_plus/info.json
index 3d9f6d1f21b9..b19bffd207b4 100644
--- a/keyboards/sentraq/s65_plus/info.json
+++ b/keyboards/sentraq/s65_plus/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F6", "F5", "F4", "F1", "F0", "E6", "B0", "B1", "D5", "B2", "B3", "D0", "D1", "D2", "D4", "D6", "D7", "F7"],
+ "rows": ["C7", "C6", "B6", "B5", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7"
},
diff --git a/keyboards/sentraq/s65_x/config.h b/keyboards/sentraq/s65_x/config.h
index e8d1cb933da1..c4678115db66 100644
--- a/keyboards/sentraq/s65_x/config.h
+++ b/keyboards/sentraq/s65_x/config.h
@@ -1,10 +1,5 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { C7, C6, B6, B5, B4 }
-#define MATRIX_COL_PINS { F4, F1, F0, E6, B0, B1, D5, B2, B3, D0, D1, D2, D4, D6, D7, F7 }
-
#define RGB_DI_PIN D3
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
@@ -23,9 +18,6 @@
#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 20
#define RGBLIGHT_SLEEP
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/sentraq/s65_x/info.json b/keyboards/sentraq/s65_x/info.json
index a37852080cb2..0ef809d1fe5c 100644
--- a/keyboards/sentraq/s65_x/info.json
+++ b/keyboards/sentraq/s65_x/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F1", "F0", "E6", "B0", "B1", "D5", "B2", "B3", "D0", "D1", "D2", "D4", "D6", "D7", "F7"],
+ "rows": ["C7", "C6", "B6", "B5", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"levels": 5,
diff --git a/keyboards/sets3n/kk980/config.h b/keyboards/sets3n/kk980/config.h
index bd71fdfc2ff0..b360e531a882 100644
--- a/keyboards/sets3n/kk980/config.h
+++ b/keyboards/sets3n/kk980/config.h
@@ -16,25 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B2, B3, D3, D4, D5, D6 }
-#define MATRIX_COL_PINS { E6, F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, B1, B0, D0, D1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/sets3n/kk980/info.json b/keyboards/sets3n/kk980/info.json
index d4132bf736cf..470509657655 100644
--- a/keyboards/sets3n/kk980/info.json
+++ b/keyboards/sets3n/kk980/info.json
@@ -8,6 +8,11 @@
"pid": "0x0002",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "B1", "B0", "D0", "D1"],
+ "rows": ["B2", "B3", "D3", "D4", "D5", "D6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/shambles/config.h b/keyboards/shambles/config.h
index 95acbd460015..db73ba34a9cf 100644
--- a/keyboards/shambles/config.h
+++ b/keyboards/shambles/config.h
@@ -1,13 +1,5 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F5, B3, B1, F7 }
-#define MATRIX_COL_PINS { D3, D1, D0, D4, C6, D7, E6, B4, B5, B6, B2, F4, F6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/shambles/info.json b/keyboards/shambles/info.json
index a82614f0aecd..b57cdd3a0083 100644
--- a/keyboards/shambles/info.json
+++ b/keyboards/shambles/info.json
@@ -8,6 +8,11 @@
"pid": "0x0F42",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D3", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5", "B6", "B2", "F4", "F6"],
+ "rows": ["F5", "B3", "B1", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/shapeshifter4060/config.h b/keyboards/shapeshifter4060/config.h
index 981222dbe88d..514076daf844 100644
--- a/keyboards/shapeshifter4060/config.h
+++ b/keyboards/shapeshifter4060/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_ROW_PINS { F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { D0, D1, B1, B3, B2, B6, B5, B4, E6, D7, C6, D4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/shapeshifter4060/info.json b/keyboards/shapeshifter4060/info.json
index 7a23820e24ae..13c77a9618ce 100644
--- a/keyboards/shapeshifter4060/info.json
+++ b/keyboards/shapeshifter4060/info.json
@@ -8,6 +8,11 @@
"pid": "0xA1F1",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["D0", "D1", "B1", "B3", "B2", "B6", "B5", "B4", "E6", "D7", "C6", "D4"],
+ "rows": ["F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/shiro/config.h b/keyboards/shiro/config.h
index 8e2a8a7974cc..e962d7866680 100644
--- a/keyboards/shiro/config.h
+++ b/keyboards/shiro/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { F4, F5, F6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/shiro/info.json b/keyboards/shiro/info.json
index a28a2fd905c9..919cce0741a6 100644
--- a/keyboards/shiro/info.json
+++ b/keyboards/shiro/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6"],
+ "rows": ["D4", "C6", "D7", "E6", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/shk9/config.h b/keyboards/shk9/config.h
index 5079642e4678..deabfc997364 100644
--- a/keyboards/shk9/config.h
+++ b/keyboards/shk9/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { B0, B1, B2 }
-#define MATRIX_COL_PINS { B3, B4, B5 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/shk9/info.json b/keyboards/shk9/info.json
index 444736778be7..fdb20b9a4d88 100644
--- a/keyboards/shk9/info.json
+++ b/keyboards/shk9/info.json
@@ -8,6 +8,11 @@
"pid": "0x4B39",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B3", "B4", "B5"],
+ "rows": ["B0", "B1", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/shoc/config.h b/keyboards/shoc/config.h
index 8190ac773a63..beb5d63a40f4 100644
--- a/keyboards/shoc/config.h
+++ b/keyboards/shoc/config.h
@@ -18,10 +18,3 @@
#define OLED_DISPLAY_128X64
#define OLED_TIMEOUT 300000
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B6, B2 }
-#define MATRIX_COL_PINS { D3, D2, D4, C6, D7, E6, B4, B5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/shoc/info.json b/keyboards/shoc/info.json
index d398e6795652..8a4196375cba 100644
--- a/keyboards/shoc/info.json
+++ b/keyboards/shoc/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "1.0.0"
},
+ "matrix_pins": {
+ "cols": ["D3", "D2", "D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F4", "F5", "F6", "F7", "B1", "B3", "B6", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/sidderskb/majbritt/rev1/config.h b/keyboards/sidderskb/majbritt/rev1/config.h
deleted file mode 100644
index 9a8b654abf6b..000000000000
--- a/keyboards/sidderskb/majbritt/rev1/config.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
-Copyright 2020 MechMerlin
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B7, B5, B4, D7, D6, B3 }
-
-#define DIODE_DIRECTION COL2ROW
-
-
-// generated by KBFirmware JSON to QMK Parser
-// https://noroadsleft.github.io/kbf_qmk_converter/
diff --git a/keyboards/sidderskb/majbritt/rev1/info.json b/keyboards/sidderskb/majbritt/rev1/info.json
index 890bb5a5cbc2..aad1ca1a1ef4 100644
--- a/keyboards/sidderskb/majbritt/rev1/info.json
+++ b/keyboards/sidderskb/majbritt/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "E6", "C7", "C6", "B6", "D4", "B1", "B0", "B7", "B5", "B4", "D7", "D6", "B3"],
+ "rows": ["D0", "D1", "D2", "D3", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/sidderskb/majbritt/rev2/config.h b/keyboards/sidderskb/majbritt/rev2/config.h
index c0c6902e3b6f..ced239c83344 100644
--- a/keyboards/sidderskb/majbritt/rev2/config.h
+++ b/keyboards/sidderskb/majbritt/rev2/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
- //0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10, 11, 12, 13, 14 ,15
-#define MATRIX_ROW_PINS { B0, B1, F7, C6, B5}
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, C7, B6, D6, B4, D4, D7, D5 ,D3, D2, D1, D0}
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/sidderskb/majbritt/rev2/info.json b/keyboards/sidderskb/majbritt/rev2/info.json
index 2ba227e4a860..574f8822473e 100644
--- a/keyboards/sidderskb/majbritt/rev2/info.json
+++ b/keyboards/sidderskb/majbritt/rev2/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "C7", "B6", "D6", "B4", "D4", "D7", "D5", "D3", "D2", "D1", "D0"],
+ "rows": ["B0", "B1", "F7", "C6", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B3", "pin_b": "B7"}
diff --git a/keyboards/signum/3_0/config.h b/keyboards/signum/3_0/config.h
deleted file mode 100644
index b554c93b851b..000000000000
--- a/keyboards/signum/3_0/config.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Copyright 2021 Stan Gurenkov
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-#pragma once
-
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/signum/3_0/elitec/config.h b/keyboards/signum/3_0/elitec/config.h
deleted file mode 100644
index 7373bfab6608..000000000000
--- a/keyboards/signum/3_0/elitec/config.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#pragma once
-
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D2, D1, F5, B5 }
-#define MATRIX_COL_PINS { B4, D7, D0, E6, D4, F6, F4, F7, B1, B3, C6, B2 }
diff --git a/keyboards/signum/3_0/elitec/info.json b/keyboards/signum/3_0/elitec/info.json
new file mode 100644
index 000000000000..84336ac59f43
--- /dev/null
+++ b/keyboards/signum/3_0/elitec/info.json
@@ -0,0 +1,7 @@
+{
+ "matrix_pins": {
+ "cols": ["B4", "D7", "D0", "E6", "D4", "F6", "F4", "F7", "B1", "B3", "C6", "B2"],
+ "rows": ["D2", "D1", "F5", "B5"]
+ },
+ "diode_direction": "COL2ROW"
+}
diff --git a/keyboards/signum/3_0/teensy/config.h b/keyboards/signum/3_0/teensy/config.h
deleted file mode 100644
index 2a81c0f565d3..000000000000
--- a/keyboards/signum/3_0/teensy/config.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Copyright 2021 Stan Gurenkov
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-#pragma once
-
-/* key matrix pins */
-// clang-format off
-#define MATRIX_ROW_PINS { B0, B3, F6, C7 }
-#define MATRIX_COL_PINS { C6, D2, B7, D3, D0, F7, F5, B6, B5, B4, D1, D7 }
-// clang-format on
diff --git a/keyboards/signum/3_0/teensy/info.json b/keyboards/signum/3_0/teensy/info.json
new file mode 100644
index 000000000000..7eae11532366
--- /dev/null
+++ b/keyboards/signum/3_0/teensy/info.json
@@ -0,0 +1,7 @@
+{
+ "matrix_pins": {
+ "cols": ["C6", "D2", "B7", "D3", "D0", "F7", "F5", "B6", "B5", "B4", "D1", "D7"],
+ "rows": ["B0", "B3", "F6", "C7"]
+ },
+ "diode_direction": "COL2ROW"
+}
diff --git a/keyboards/silverbullet44/config.h b/keyboards/silverbullet44/config.h
index 378fe0b2a6a3..70f72f1d0001 100644
--- a/keyboards/silverbullet44/config.h
+++ b/keyboards/silverbullet44/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
-#define MATRIX_COL_PINS { B3, B1, F7, F6, F5, F4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define MASTER_RIGHT
#define RGB_DI_PIN D3
diff --git a/keyboards/silverbullet44/info.json b/keyboards/silverbullet44/info.json
index 18d9889666f1..3458bfe1f52e 100644
--- a/keyboards/silverbullet44/info.json
+++ b/keyboards/silverbullet44/info.json
@@ -8,6 +8,11 @@
"pid": "0x27DB",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B3", "B1", "F7", "F6", "F5", "F4"],
+ "rows": ["D4", "C6", "D7", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D2"
},
diff --git a/keyboards/singa/config.h b/keyboards/singa/config.h
index 3e9694ca3668..75b78de22de1 100644
--- a/keyboards/singa/config.h
+++ b/keyboards/singa/config.h
@@ -20,11 +20,6 @@ along with this program. If not, see .
#define RGBLED_NUM 18
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6 }
-#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/singa/info.json b/keyboards/singa/info.json
index b41713f7098b..4302010a1ed4 100644
--- a/keyboards/singa/info.json
+++ b/keyboards/singa/info.json
@@ -8,6 +8,11 @@
"pid": "0x7575",
"device_version": "2.0.0"
},
+ "matrix_pins": {
+ "cols": ["A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "C7", "C6", "C5", "C4", "C3", "C2", "D7"],
+ "rows": ["B0", "B1", "B2", "B3", "B4", "B5", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "D4"
},
diff --git a/keyboards/skeletn87/hotswap/config.h b/keyboards/skeletn87/hotswap/config.h
index 5307bcd65abe..7af4feb36315 100644
--- a/keyboards/skeletn87/hotswap/config.h
+++ b/keyboards/skeletn87/hotswap/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, B0, B1 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN B3
#ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/skeletn87/hotswap/info.json b/keyboards/skeletn87/hotswap/info.json
index 39b296a67933..31aebd5e9005 100644
--- a/keyboards/skeletn87/hotswap/info.json
+++ b/keyboards/skeletn87/hotswap/info.json
@@ -8,6 +8,11 @@
"pid": "0xB5E9",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "B0", "B1"],
+ "rows": ["C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"levels": 8,
diff --git a/keyboards/skeletn87/soldered/config.h b/keyboards/skeletn87/soldered/config.h
index 095b95d13c1c..698eecb6fca4 100644
--- a/keyboards/skeletn87/soldered/config.h
+++ b/keyboards/skeletn87/soldered/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, B0, B1 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN B2
#ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/skeletn87/soldered/info.json b/keyboards/skeletn87/soldered/info.json
index 32ed0e6f0e36..e7afa01ebaf0 100644
--- a/keyboards/skeletn87/soldered/info.json
+++ b/keyboards/skeletn87/soldered/info.json
@@ -8,6 +8,11 @@
"pid": "0xB5E8",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "B0", "B1"],
+ "rows": ["C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"levels": 8,
diff --git a/keyboards/skeletonkbd/skeletonnumpad/config.h b/keyboards/skeletonkbd/skeletonnumpad/config.h
index 7814933e4230..c8ed85b89e67 100644
--- a/keyboards/skeletonkbd/skeletonnumpad/config.h
+++ b/keyboards/skeletonkbd/skeletonnumpad/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B6, C6, C7, F7, F6 }
-#define MATRIX_COL_PINS { D6, D7, B4, B5 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D4
#ifdef RGB_DI_PIN
# define RGBLED_NUM 17
diff --git a/keyboards/skeletonkbd/skeletonnumpad/info.json b/keyboards/skeletonkbd/skeletonnumpad/info.json
index c637cbfffc16..82f7c4cee1b3 100644
--- a/keyboards/skeletonkbd/skeletonnumpad/info.json
+++ b/keyboards/skeletonkbd/skeletonnumpad/info.json
@@ -8,6 +8,11 @@
"pid": "0x6E70",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D6", "D7", "B4", "B5"],
+ "rows": ["B6", "C6", "C7", "F7", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/skergo/config.h b/keyboards/skergo/config.h
index 9d5633e57490..a463c64167ec 100644
--- a/keyboards/skergo/config.h
+++ b/keyboards/skergo/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B0, B4, B3, B2, B1 }
-#define MATRIX_COL_PINS { A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C2, C1, C0, D7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/skergo/info.json b/keyboards/skergo/info.json
index 01572f630f6e..944516fecd36 100644
--- a/keyboards/skergo/info.json
+++ b/keyboards/skergo/info.json
@@ -8,6 +8,11 @@
"pid": "0x534B",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A1", "A2", "A3", "A4", "A5", "A6", "A7", "C7", "C6", "C5", "C4", "C2", "C1", "C0", "D7"],
+ "rows": ["B0", "B4", "B3", "B2", "B1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32a",
"bootloader": "usbasploader",
"layout_aliases": {
diff --git a/keyboards/skippys_custom_pcs/rooboard65/config.h b/keyboards/skippys_custom_pcs/rooboard65/config.h
index 2f32ae1375f5..f8b5ae2db693 100644
--- a/keyboards/skippys_custom_pcs/rooboard65/config.h
+++ b/keyboards/skippys_custom_pcs/rooboard65/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
-#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B3, B2, B1, D1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/skippys_custom_pcs/rooboard65/info.json b/keyboards/skippys_custom_pcs/rooboard65/info.json
index 497b5a0e7fe8..dada0aec1f62 100644
--- a/keyboards/skippys_custom_pcs/rooboard65/info.json
+++ b/keyboards/skippys_custom_pcs/rooboard65/info.json
@@ -8,6 +8,11 @@
"pid": "0x0002",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B3", "B2", "B1", "D1"],
+ "rows": ["F0", "F1", "F4", "F5", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["65_ansi"],
diff --git a/keyboards/skippys_custom_pcs/roopad/config.h b/keyboards/skippys_custom_pcs/roopad/config.h
index 7c4946f423b5..e912cc50ea15 100644
--- a/keyboards/skippys_custom_pcs/roopad/config.h
+++ b/keyboards/skippys_custom_pcs/roopad/config.h
@@ -17,25 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-
-// Checked with Eagle Schematic
-#define MATRIX_ROW_PINS { B5, F6, F5, F4, F1 }
-#define MATRIX_COL_PINS { F0, B4, D7, D6, D4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN B6
#define RGBLED_NUM 21
#define RGBLIGHT_SLEEP
diff --git a/keyboards/skippys_custom_pcs/roopad/info.json b/keyboards/skippys_custom_pcs/roopad/info.json
index 9b7c0797659b..e0110579f81e 100644
--- a/keyboards/skippys_custom_pcs/roopad/info.json
+++ b/keyboards/skippys_custom_pcs/roopad/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "B4", "D7", "D6", "D4"],
+ "rows": ["B5", "F6", "F5", "F4", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/skme/zeno/config.h b/keyboards/skme/zeno/config.h
index 11eea11605b3..6c8ce4c0eaf5 100644
--- a/keyboards/skme/zeno/config.h
+++ b/keyboards/skme/zeno/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { B1, B2, B3, B7, C7 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B0, C6, B6, B5, D5, D3, D2, D1, D0 }
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/slz40/config.h b/keyboards/slz40/config.h
index b55916fe1542..e66e3202cc29 100644
--- a/keyboards/slz40/config.h
+++ b/keyboards/slz40/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B4, B5, B3, B2, B6 }
-#define MATRIX_COL_PINS { F4, D2, F5, D1, F6, D0, F7, D4, B1, C6, E6, D7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/slz40/info.json b/keyboards/slz40/info.json
index dcbd0c73b297..788fe1db9526 100644
--- a/keyboards/slz40/info.json
+++ b/keyboards/slz40/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "D2", "F5", "D1", "F6", "D0", "F7", "D4", "B1", "C6", "E6", "D7"],
+ "rows": ["B4", "B5", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/smallkeyboard/config.h b/keyboards/smallkeyboard/config.h
index 570607c3ca67..4bee1c3663f1 100644
--- a/keyboards/smallkeyboard/config.h
+++ b/keyboards/smallkeyboard/config.h
@@ -17,23 +17,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS {C7, C6 }
-#define MATRIX_COL_PINS {F7, F6, F5}
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
#ifdef RGB_MATRIX_ENABLE
# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
# define RGB_MATRIX_KEYPRESSES
diff --git a/keyboards/smallkeyboard/info.json b/keyboards/smallkeyboard/info.json
index 11a96f5af678..16c79cf6ad2d 100644
--- a/keyboards/smallkeyboard/info.json
+++ b/keyboards/smallkeyboard/info.json
@@ -8,6 +8,11 @@
"pid": "0x736B",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F7", "F6", "F5"],
+ "rows": ["C7", "C6"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"debounce": 3,
diff --git a/keyboards/smithrune/iron165r2/config.h b/keyboards/smithrune/iron165r2/config.h
index d8e7bc64d807..9749d68d72d0 100644
--- a/keyboards/smithrune/iron165r2/config.h
+++ b/keyboards/smithrune/iron165r2/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_COL_PINS { A3 , B8 , B9 , B1 , B0 , B5 , B4 , B3 , A15, A8 , A1 , A0 , C15, C14, C13}
-#define MATRIX_ROW_PINS { B10, A10, A2 , A5 , A7 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/smithrune/iron165r2/info.json b/keyboards/smithrune/iron165r2/info.json
index ed24e0e63c90..35a2a0c4bd2c 100644
--- a/keyboards/smithrune/iron165r2/info.json
+++ b/keyboards/smithrune/iron165r2/info.json
@@ -8,6 +8,11 @@
"pid": "0x1652",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A3", "B8", "B9", "B1", "B0", "B5", "B4", "B3", "A15", "A8", "A1", "A0", "C15", "C14", "C13"],
+ "rows": ["B10", "A10", "A2", "A5", "A7"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "A4"
},
diff --git a/keyboards/smithrune/iron180/config.h b/keyboards/smithrune/iron180/config.h
index 92c28d57195e..7506922b008e 100644
--- a/keyboards/smithrune/iron180/config.h
+++ b/keyboards/smithrune/iron180/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see .
#pragma once
-#define MATRIX_COL_PINS { B7 , B6 , B5 , B4 , B3 , A10, A9 , A8 , B15, B14, B13, B12, B11, B2 , A4 , B1 , A3 }
-#define MATRIX_ROW_PINS { B9 , B8 , A15, B0 , A7 , A5 }
-#define DIODE_DIRECTION COL2ROW
-
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
diff --git a/keyboards/smithrune/iron180/info.json b/keyboards/smithrune/iron180/info.json
index 0f8c436240d1..17febf6be574 100644
--- a/keyboards/smithrune/iron180/info.json
+++ b/keyboards/smithrune/iron180/info.json
@@ -8,6 +8,11 @@
"pid": "0x1180",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B7", "B6", "B5", "B4", "B3", "A10", "A9", "A8", "B15", "B14", "B13", "B12", "B11", "B2", "A4", "B1", "A3"],
+ "rows": ["B9", "B8", "A15", "B0", "A7", "A5"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "A6",
"levels": 6,
diff --git a/keyboards/smk60/config.h b/keyboards/smk60/config.h
index a4aa26d5d5a5..622495f6d0c3 100644
--- a/keyboards/smk60/config.h
+++ b/keyboards/smk60/config.h
@@ -4,12 +4,6 @@
*/
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B0, F0, F1, F5, B2 }
-#define MATRIX_COL_PINS { B4, B5, B6, C6, C7, F6, F7, F4, B1, B3, D0, D1, D2, D3, D5}
-#define DIODE_DIRECTION COL2ROW
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/smk60/info.json b/keyboards/smk60/info.json
index 9e356ef6c8e6..bc32109a17c4 100644
--- a/keyboards/smk60/info.json
+++ b/keyboards/smk60/info.json
@@ -8,6 +8,11 @@
"pid": "0x6585",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B4", "B5", "B6", "C6", "C7", "F6", "F7", "F4", "B1", "B3", "D0", "D1", "D2", "D3", "D5"],
+ "rows": ["B0", "F0", "F1", "F5", "B2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["60_ansi", "60_hhkb", "60_iso"],
diff --git a/keyboards/snampad/config.h b/keyboards/snampad/config.h
index 9c0f2de65b9b..63349588ecaf 100644
--- a/keyboards/snampad/config.h
+++ b/keyboards/snampad/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/snampad/info.json b/keyboards/snampad/info.json
index a8f8997593e2..a8a9222d675d 100644
--- a/keyboards/snampad/info.json
+++ b/keyboards/snampad/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D0", "D1", "D2", "D3"],
+ "rows": ["F4", "F5", "F6", "F7", "B1", "B3"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "caterina",
"community_layouts": ["numpad_6x4"],
diff --git a/keyboards/sneakbox/aliceclone/config.h b/keyboards/sneakbox/aliceclone/config.h
index cae120ac7e5e..31e6bd43c84f 100644
--- a/keyboards/sneakbox/aliceclone/config.h
+++ b/keyboards/sneakbox/aliceclone/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F1, E6, F4, B1, F5, B2, F6, B3, F7, B7 }
-#define MATRIX_COL_PINS { F0, D0, C7, C6, B6, B5, B4, D1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/sneakbox/aliceclone/info.json b/keyboards/sneakbox/aliceclone/info.json
index 6890765f7f92..fb2b7c56cd37 100644
--- a/keyboards/sneakbox/aliceclone/info.json
+++ b/keyboards/sneakbox/aliceclone/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "D0", "C7", "C6", "B6", "B5", "B4", "D1"],
+ "rows": ["F1", "E6", "F4", "B1", "F5", "B2", "F6", "B3", "F7", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D3", "pin_b": "D2", "resolution": 1}
diff --git a/keyboards/sneakbox/aliceclonergb/config.h b/keyboards/sneakbox/aliceclonergb/config.h
index 26bddb382a7a..6a7dcff5edfd 100644
--- a/keyboards/sneakbox/aliceclonergb/config.h
+++ b/keyboards/sneakbox/aliceclonergb/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F1, E6, F4, B1, F5, B2, F6, B3, F7, B7 }
-#define MATRIX_COL_PINS { F0, D0, C7, C6, B6, B5, B4, D1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D5
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/sneakbox/aliceclonergb/info.json b/keyboards/sneakbox/aliceclonergb/info.json
index cb7226ae81be..a138d5d276bd 100644
--- a/keyboards/sneakbox/aliceclonergb/info.json
+++ b/keyboards/sneakbox/aliceclonergb/info.json
@@ -8,6 +8,11 @@
"pid": "0x0006",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "D0", "C7", "C6", "B6", "B5", "B4", "D1"],
+ "rows": ["F1", "E6", "F4", "B1", "F5", "B2", "F6", "B3", "F7", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D3", "pin_b": "D2", "resolution": 1}
diff --git a/keyboards/sneakbox/ava/config.h b/keyboards/sneakbox/ava/config.h
index 23a01323059e..a936b135f905 100644
--- a/keyboards/sneakbox/ava/config.h
+++ b/keyboards/sneakbox/ava/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F1, E6, F4, B1, F5, B2, F6, B3, B7 }
-#define MATRIX_COL_PINS { F0, D0, C7, C6, B6, B5, B4, D1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN F7
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/sneakbox/ava/info.json b/keyboards/sneakbox/ava/info.json
index dae35f1dc61a..068806ca3346 100644
--- a/keyboards/sneakbox/ava/info.json
+++ b/keyboards/sneakbox/ava/info.json
@@ -8,6 +8,11 @@
"pid": "0x0004",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "D0", "C7", "C6", "B6", "B5", "B4", "D1"],
+ "rows": ["F1", "E6", "F4", "B1", "F5", "B2", "F6", "B3", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D3", "pin_b": "D2", "resolution": 1}
diff --git a/keyboards/sneakbox/disarray/ortho/config.h b/keyboards/sneakbox/disarray/ortho/config.h
index 78b024604c63..f71cc2ebbb28 100644
--- a/keyboards/sneakbox/disarray/ortho/config.h
+++ b/keyboards/sneakbox/disarray/ortho/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B7, D0, D1, D2, D3, B0}
-#define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1, F0, E6}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/sneakbox/disarray/ortho/info.json b/keyboards/sneakbox/disarray/ortho/info.json
index 65c8ff41d1e1..d832b56a7300 100644
--- a/keyboards/sneakbox/disarray/ortho/info.json
+++ b/keyboards/sneakbox/disarray/ortho/info.json
@@ -8,6 +8,11 @@
"pid": "0x0003",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1", "F0", "E6"],
+ "rows": ["B7", "D0", "D1", "D2", "D3", "B0"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B3", "pin_b": "B2", "resolution": 1}
diff --git a/keyboards/sneakbox/disarray/staggered/config.h b/keyboards/sneakbox/disarray/staggered/config.h
index 486442bcf1f3..f71cc2ebbb28 100644
--- a/keyboards/sneakbox/disarray/staggered/config.h
+++ b/keyboards/sneakbox/disarray/staggered/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B7, D0, D1, D2, D3}
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, E6}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/sneakbox/disarray/staggered/info.json b/keyboards/sneakbox/disarray/staggered/info.json
index 1a788b77ec68..a69447365aaa 100644
--- a/keyboards/sneakbox/disarray/staggered/info.json
+++ b/keyboards/sneakbox/disarray/staggered/info.json
@@ -8,6 +8,11 @@
"pid": "0x0002",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "E6"],
+ "rows": ["B7", "D0", "D1", "D2", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B3", "pin_b": "B2", "resolution": 1}
diff --git a/keyboards/soda/cherish/config.h b/keyboards/soda/cherish/config.h
index 95d332cf9525..fdcd9d801bd0 100644
--- a/keyboards/soda/cherish/config.h
+++ b/keyboards/soda/cherish/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see .
#pragma once
-#define MATRIX_COL_PINS { B12, B13, B14, B15, A8, A9, A10, A14, A15, B3, B4, B5, B6, B7, B8}
-#define MATRIX_ROW_PINS { A7, B0, B1, B2, B10, B11 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/soda/cherish/info.json b/keyboards/soda/cherish/info.json
index 713356f944ca..446fda090bf3 100644
--- a/keyboards/soda/cherish/info.json
+++ b/keyboards/soda/cherish/info.json
@@ -8,6 +8,11 @@
"pid": "0xEB52",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B12", "B13", "B14", "B15", "A8", "A9", "A10", "A14", "A15", "B3", "B4", "B5", "B6", "B7", "B8"],
+ "rows": ["A7", "B0", "B1", "B2", "B10", "B11"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layout_aliases": {
diff --git a/keyboards/soda/pocket/config.h b/keyboards/soda/pocket/config.h
index 4b6ff7b4abd4..89571c505ff6 100644
--- a/keyboards/soda/pocket/config.h
+++ b/keyboards/soda/pocket/config.h
@@ -15,11 +15,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_COL_PINS { A2, A1, B14, B4, B5, B6, B7}
-#define MATRIX_ROW_PINS { A7, B0, B1, B2, B10, B11 }
-#define DIODE_DIRECTION ROW2COL
-
#define LED_NUM_LOCK_PIN B15
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/soda/pocket/info.json b/keyboards/soda/pocket/info.json
index b91f795b048c..96b5276f8015 100644
--- a/keyboards/soda/pocket/info.json
+++ b/keyboards/soda/pocket/info.json
@@ -8,6 +8,11 @@
"pid": "0x4F51",
"device_version": "1.0.2"
},
+ "matrix_pins": {
+ "cols": ["A2", "A1", "B14", "B4", "B5", "B6", "B7"],
+ "rows": ["A7", "B0", "B1", "B2", "B10", "B11"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/sofle/keyhive/config.h b/keyboards/sofle/keyhive/config.h
index c65caad1deb5..0f02ae7cfbe9 100755
--- a/keyboards/sofle/keyhive/config.h
+++ b/keyboards/sofle/keyhive/config.h
@@ -18,14 +18,6 @@
#pragma once
-// wiring of each half
-#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, NO_PIN } // A virtual pin is needed for the encoder key matrix in via.
-#define MATRIX_ROW_PINS_RIGHT { C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS_RIGHT { F6, F7, B1, B3, B2, B6, NO_PIN } // A virtual pin is needed for the encoder key matrix in via.
-
-#define DIODE_DIRECTION COL2ROW
-
#define TAP_CODE_DELAY 10
// OLED settings
diff --git a/keyboards/sofle/keyhive/info.json b/keyboards/sofle/keyhive/info.json
index f1d76cb78895..5bfc312cf284 100644
--- a/keyboards/sofle/keyhive/info.json
+++ b/keyboards/sofle/keyhive/info.json
@@ -6,6 +6,11 @@
"pid": "0x1287",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3", "B1", "F7", "F6", null],
+ "rows": ["C6", "D7", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "F5", "pin_b": "F4"}
@@ -19,6 +24,12 @@
{"pin_a": "F4", "pin_b": "F5", "resolution": 2}
]
}
+ },
+ "matrix_pins": {
+ "right": {
+ "cols": ["F6", "F7", "B1", "B3", "B2", "B6", null],
+ "rows": ["C6", "D7", "E6", "B4", "B5"]
+ }
}
},
"processor": "atmega32u4",
diff --git a/keyboards/sofle/rev1/config.h b/keyboards/sofle/rev1/config.h
index 34886b3be1c0..be6454974844 100644
--- a/keyboards/sofle/rev1/config.h
+++ b/keyboards/sofle/rev1/config.h
@@ -1,10 +1,5 @@
#pragma once
-// wiring of each half
-#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
-#define DIODE_DIRECTION COL2ROW
-
#define TAPPING_TERM 100
#define TAP_CODE_DELAY 10
diff --git a/keyboards/sofle/rev1/info.json b/keyboards/sofle/rev1/info.json
index 4a113ec2f289..1f9829426e0c 100644
--- a/keyboards/sofle/rev1/info.json
+++ b/keyboards/sofle/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0287",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F6", "F7", "B1", "B3", "B2", "B6"],
+ "rows": ["C6", "D7", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "F5", "pin_b": "F4", "resolution": 2}
diff --git a/keyboards/soup10/config.h b/keyboards/soup10/config.h
index fd11a7d1a92b..f479b1579412 100644
--- a/keyboards/soup10/config.h
+++ b/keyboards/soup10/config.h
@@ -17,24 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-// 0 1 2 3
-#define MATRIX_ROW_PINS { D1, D0, D4, C6 }
-#define MATRIX_COL_PINS { D7, E6, B4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/soup10/info.json b/keyboards/soup10/info.json
index e96e371d3e39..df601d401233 100644
--- a/keyboards/soup10/info.json
+++ b/keyboards/soup10/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D7", "E6", "B4"],
+ "rows": ["D1", "D0", "D4", "C6"]
+ },
+ "diode_direction": "COL2ROW",
"bootmagic": {
"matrix": [0, 1]
},
diff --git a/keyboards/sowbug/68keys/config.h b/keyboards/sowbug/68keys/config.h
index 265cb24f0702..5f01daec820d 100644
--- a/keyboards/sowbug/68keys/config.h
+++ b/keyboards/sowbug/68keys/config.h
@@ -18,14 +18,6 @@
#pragma once
-
-// key matrix pins
-#define MATRIX_ROW_PINS { C14, C15, A0, A1, A2 }
-#define MATRIX_COL_PINS { A3, A4, A5, A6, A7, B0, B1, B10, B11, B12, B13, B14, B15, A8, A9, A10 }
-
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN B9
#define RGB_MATRIX_KEYPRESSES
diff --git a/keyboards/sowbug/68keys/info.json b/keyboards/sowbug/68keys/info.json
index fef199e6cd1d..8da6bdc825bb 100644
--- a/keyboards/sowbug/68keys/info.json
+++ b/keyboards/sowbug/68keys/info.json
@@ -8,6 +8,11 @@
"pid": "0x8888",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A3", "A4", "A5", "A6", "A7", "B0", "B1", "B10", "B11", "B12", "B13", "B14", "B15", "A8", "A9", "A10"],
+ "rows": ["C14", "C15", "A0", "A1", "A2"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F103",
"bootloader": "stm32duino",
"layouts": {
diff --git a/keyboards/sowbug/ansi_tkl/config.h b/keyboards/sowbug/ansi_tkl/config.h
index 770a48b14df6..7c520910bcb2 100644
--- a/keyboards/sowbug/ansi_tkl/config.h
+++ b/keyboards/sowbug/ansi_tkl/config.h
@@ -18,16 +18,6 @@
#pragma once
-
-// key matrix pins
-#define MATRIX_ROW_PINS \
- { C14, C15, A0, A1, A2, A3 }
-#define MATRIX_COL_PINS \
- { A4, A5, A6, A7, B0, B1, B10, B11, B12, B13, B14, B15, A8, A9, A10, A15, B3 }
-
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN B9
#define RGB_MATRIX_KEYPRESSES
#define RGBLED_NUM 87
diff --git a/keyboards/sowbug/ansi_tkl/info.json b/keyboards/sowbug/ansi_tkl/info.json
index 30cef14f7018..a1c19c60aa2b 100644
--- a/keyboards/sowbug/ansi_tkl/info.json
+++ b/keyboards/sowbug/ansi_tkl/info.json
@@ -8,6 +8,11 @@
"pid": "0x8889",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A4", "A5", "A6", "A7", "B0", "B1", "B10", "B11", "B12", "B13", "B14", "B15", "A8", "A9", "A10", "A15", "B3"],
+ "rows": ["C14", "C15", "A0", "A1", "A2", "A3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F103",
"bootloader": "stm32duino",
"layouts": {
diff --git a/keyboards/soy20/config.h b/keyboards/soy20/config.h
index 19ca0d46e56b..6e73672c8d1d 100644
--- a/keyboards/soy20/config.h
+++ b/keyboards/soy20/config.h
@@ -16,14 +16,6 @@ along with this program. If not, see .*/
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 }
-#define MATRIX_COL_PINS { B5, B6, B7, C7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/soy20/info.json b/keyboards/soy20/info.json
index 4add710d13d4..069427beedaa 100644
--- a/keyboards/soy20/info.json
+++ b/keyboards/soy20/info.json
@@ -8,6 +8,11 @@
"pid": "0x534F",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B5", "B6", "B7", "C7"],
+ "rows": ["B0", "B1", "B2", "B3", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u2",
"bootloader": "atmel-dfu",
"community_layouts": ["ortho_5x4"],
diff --git a/keyboards/spaceholdings/nebula12/config.h b/keyboards/spaceholdings/nebula12/config.h
index fb56b1ddda21..8199836860b1 100755
--- a/keyboards/spaceholdings/nebula12/config.h
+++ b/keyboards/spaceholdings/nebula12/config.h
@@ -24,13 +24,6 @@ along with this program. If not, see .
/* LSE clock */
#define STM32_LSECLK 32768
-#define MATRIX_ROW_PINS { A8, C15, A0, A1 }
-#define MATRIX_COL_PINS { A9, C13, C14 }
-// To enable debugger set A13 A14 -> A5 A7
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
diff --git a/keyboards/spaceholdings/nebula12/info.json b/keyboards/spaceholdings/nebula12/info.json
index fac12196b1f8..898a6ea11ec5 100755
--- a/keyboards/spaceholdings/nebula12/info.json
+++ b/keyboards/spaceholdings/nebula12/info.json
@@ -8,6 +8,11 @@
"pid": "0x5337",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A9", "C13", "C14"],
+ "rows": ["A8", "C15", "A0", "A1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/spaceholdings/nebula12b/config.h b/keyboards/spaceholdings/nebula12b/config.h
index 9c44c01b7ace..0928d190df7d 100755
--- a/keyboards/spaceholdings/nebula12b/config.h
+++ b/keyboards/spaceholdings/nebula12b/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_ROW_PINS { B7, B4, F7, F6 }
-#define MATRIX_COL_PINS { F4, F5, D7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* RGB options */
#define RGB_DI_PIN D5
diff --git a/keyboards/spaceholdings/nebula12b/info.json b/keyboards/spaceholdings/nebula12b/info.json
index 400e5790c980..8d5af9da505b 100755
--- a/keyboards/spaceholdings/nebula12b/info.json
+++ b/keyboards/spaceholdings/nebula12b/info.json
@@ -8,6 +8,11 @@
"pid": "0x5332",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "D7"],
+ "rows": ["B7", "B4", "F7", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/spaceholdings/nebula68/config.h b/keyboards/spaceholdings/nebula68/config.h
index 5e9d0a58e54d..a3b44e4afee9 100755
--- a/keyboards/spaceholdings/nebula68/config.h
+++ b/keyboards/spaceholdings/nebula68/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_ROW_PINS { B3, B4, B5, A8, A4 }
-#define MATRIX_COL_PINS { A13, A10, A9, A14, A15, B8, B9, C13, C14, C15, A0, A1, A2, A3, A5 }
-// To enable debugger set A13 A14 -> A5 A7
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define WS2812_PWM_DRIVER PWMD3 // default: PWMD2
#define WS2812_PWM_CHANNEL 2 // default: 2
#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
diff --git a/keyboards/spaceholdings/nebula68/info.json b/keyboards/spaceholdings/nebula68/info.json
index 77bda023d344..9ee3469f0d51 100755
--- a/keyboards/spaceholdings/nebula68/info.json
+++ b/keyboards/spaceholdings/nebula68/info.json
@@ -8,6 +8,11 @@
"pid": "0x5336",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A13", "A10", "A9", "A14", "A15", "B8", "B9", "C13", "C14", "C15", "A0", "A1", "A2", "A3", "A5"],
+ "rows": ["B3", "B4", "B5", "A8", "A4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"board": "QMK_PROTON_C",
diff --git a/keyboards/spaceholdings/nebula68b/config.h b/keyboards/spaceholdings/nebula68b/config.h
index ee00fb233cc9..08ce4cb92d70 100755
--- a/keyboards/spaceholdings/nebula68b/config.h
+++ b/keyboards/spaceholdings/nebula68b/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_ROW_PINS { D4, D6, D7, B4, E6 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, B5, B6, C6, C7, F7, F6, F5, F4, F1, F0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* RGB options */
#define RGB_DI_PIN B7
diff --git a/keyboards/spaceholdings/nebula68b/info.json b/keyboards/spaceholdings/nebula68b/info.json
index b1ca0f0fd08c..ef5d1b6b9c7e 100755
--- a/keyboards/spaceholdings/nebula68b/info.json
+++ b/keyboards/spaceholdings/nebula68b/info.json
@@ -8,6 +8,11 @@
"pid": "0x5338",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D0", "D1", "D2", "D3", "D5", "B5", "B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1", "F0"],
+ "rows": ["D4", "D6", "D7", "B4", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/spaceman/pancake/rev1/config.h b/keyboards/spaceman/pancake/rev1/config.h
deleted file mode 100644
index 5c72d34933e8..000000000000
--- a/keyboards/spaceman/pancake/rev1/config.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* Copyright 2019 Spaceman
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-#pragma once
-
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/spaceman/pancake/rev1/feather/config.h b/keyboards/spaceman/pancake/rev1/feather/config.h
index ea6af6336d6e..9ff72156da90 100644
--- a/keyboards/spaceman/pancake/rev1/feather/config.h
+++ b/keyboards/spaceman/pancake/rev1/feather/config.h
@@ -15,8 +15,4 @@
*/
#pragma once
-/* Pancake default pinout */
-#define MATRIX_ROW_PINS { B5, D7, C6, D0 }
-#define MATRIX_COL_PINS { C7, D6, B7, B6, F0, D2, D3, F1, F4, F5, F6, F7 }
-
#define VIA_HAS_BROKEN_KEYCODES
diff --git a/keyboards/spaceman/pancake/rev1/feather/info.json b/keyboards/spaceman/pancake/rev1/feather/info.json
new file mode 100644
index 000000000000..2d8072e7f186
--- /dev/null
+++ b/keyboards/spaceman/pancake/rev1/feather/info.json
@@ -0,0 +1,7 @@
+{
+ "matrix_pins": {
+ "cols": ["C7", "D6", "B7", "B6", "F0", "D2", "D3", "F1", "F4", "F5", "F6", "F7"],
+ "rows": ["B5", "D7", "C6", "D0"]
+ },
+ "diode_direction": "COL2ROW"
+}
diff --git a/keyboards/spaceman/pancake/rev1/promicro/config.h b/keyboards/spaceman/pancake/rev1/promicro/config.h
deleted file mode 100644
index 3024db4d46ed..000000000000
--- a/keyboards/spaceman/pancake/rev1/promicro/config.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Copyright 2019 Spaceman
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-#pragma once
-
-/* Pancake default pinout */
-#define MATRIX_ROW_PINS { B1, B3, B2, B6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, E6, B4, B5, D7, C6, D4, D0, D1 }
diff --git a/keyboards/spaceman/pancake/rev1/promicro/info.json b/keyboards/spaceman/pancake/rev1/promicro/info.json
new file mode 100644
index 000000000000..47ab8fdcd0a3
--- /dev/null
+++ b/keyboards/spaceman/pancake/rev1/promicro/info.json
@@ -0,0 +1,7 @@
+{
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "E6", "B4", "B5", "D7", "C6", "D4", "D0", "D1"],
+ "rows": ["B1", "B3", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW"
+}
diff --git a/keyboards/spaceman/pancake/rev2/config.h b/keyboards/spaceman/pancake/rev2/config.h
deleted file mode 100644
index 294f9cc663eb..000000000000
--- a/keyboards/spaceman/pancake/rev2/config.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Copyright 2020 Spaceman
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-#pragma once
-
-#define DIODE_DIRECTION COL2ROW
-
-#define MATRIX_ROW_PINS { C7, C6, B6, B5 }
-#define MATRIX_COL_PINS { B7, B3, B2, B1 ,B0, E6, F0, F1, F4, F5, F6, F7 }
diff --git a/keyboards/spaceman/pancake/rev2/info.json b/keyboards/spaceman/pancake/rev2/info.json
index 22da63e5f225..49c12d20e06c 100644
--- a/keyboards/spaceman/pancake/rev2/info.json
+++ b/keyboards/spaceman/pancake/rev2/info.json
@@ -8,6 +8,11 @@
"pid": "0x5032",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["B7", "B3", "B2", "B1", "B0", "E6", "F0", "F1", "F4", "F5", "F6", "F7"],
+ "rows": ["C7", "C6", "B6", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["ortho_4x12"],
diff --git a/keyboards/spaceman/yun65/config.h b/keyboards/spaceman/yun65/config.h
deleted file mode 100644
index b8900721e420..000000000000
--- a/keyboards/spaceman/yun65/config.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Copyright 2020 Spaceman
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-#pragma once
-
-#define DIODE_DIRECTION COL2ROW
-
-#define MATRIX_ROW_PINS { E6, D3, D2, D1, D0 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, D4, D6, D7, B4, B5, B6, C6, C7, D5, B3 }
-
diff --git a/keyboards/spaceman/yun65/info.json b/keyboards/spaceman/yun65/info.json
index 1103a08c7206..5ffd5772f6df 100644
--- a/keyboards/spaceman/yun65/info.json
+++ b/keyboards/spaceman/yun65/info.json
@@ -8,6 +8,11 @@
"pid": "0x594E",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "D5", "B3"],
+ "rows": ["E6", "D3", "D2", "D1", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/spacetime/config.h b/keyboards/spacetime/config.h
index 22fced8d29c6..b7ece10f6c7c 100644
--- a/keyboards/spacetime/config.h
+++ b/keyboards/spacetime/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/spacetime/info.json b/keyboards/spacetime/info.json
index b4c037caebe0..c82bd6ecbb8d 100644
--- a/keyboards/spacetime/info.json
+++ b/keyboards/spacetime/info.json
@@ -8,6 +8,11 @@
"pid": "0x0A0C",
"device_version": "1.0.0"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2"],
+ "rows": ["D4", "C6", "D7", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D0"
},
diff --git a/keyboards/spacey/config.h b/keyboards/spacey/config.h
deleted file mode 100644
index 411f2c257895..000000000000
--- a/keyboards/spacey/config.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
-Copyright 2021 vanilla
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- */
-#define MATRIX_ROW_PINS { D4, C6, F6, F5, F4 }
-#define MATRIX_COL_PINS { D5, B7, B5, B4, E6, D7, C7, B3, B2, B6, F0, F1, B1, F7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/spacey/info.json b/keyboards/spacey/info.json
index c24d46d753bd..881efb60d6ba 100644
--- a/keyboards/spacey/info.json
+++ b/keyboards/spacey/info.json
@@ -8,6 +8,11 @@
"pid": "0x2045",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D5", "B7", "B5", "B4", "E6", "D7", "C7", "B3", "B2", "B6", "F0", "F1", "B1", "F7"],
+ "rows": ["D4", "C6", "F6", "F5", "F4"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D0", "pin_b": "D1"}
diff --git a/keyboards/sparrow62/config.h b/keyboards/sparrow62/config.h
index 45d0711d858a..3f234d31cba6 100644
--- a/keyboards/sparrow62/config.h
+++ b/keyboards/sparrow62/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-
-// wiring of each half
-#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define SPLIT_HAND_PIN F4
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/sparrow62/info.json b/keyboards/sparrow62/info.json
index c3d8a099e547..62e9d019c31b 100644
--- a/keyboards/sparrow62/info.json
+++ b/keyboards/sparrow62/info.json
@@ -8,6 +8,11 @@
"pid": "0x7461",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"],
+ "rows": ["C6", "D7", "E6", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"split": {
"soft_serial_pin": "D2"
},
diff --git a/keyboards/specskeys/config.h b/keyboards/specskeys/config.h
index a987f5782f11..490ac5e5c027 100644
--- a/keyboards/specskeys/config.h
+++ b/keyboards/specskeys/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { E6, B0, B1, B2, B3, D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/specskeys/info.json b/keyboards/specskeys/info.json
index 8a4ff0d90b9e..ab08aaef3da3 100644
--- a/keyboards/specskeys/info.json
+++ b/keyboards/specskeys/info.json
@@ -8,6 +8,11 @@
"pid": "0x0080",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "B0", "B1", "B2", "B3", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6"],
+ "rows": ["F0", "F1", "F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"levels": 1
diff --git a/keyboards/splitish/config.h b/keyboards/splitish/config.h
index 7f7b41f58cda..f3fe3850d708 100644
--- a/keyboards/splitish/config.h
+++ b/keyboards/splitish/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_COL_PINS { F4 , F5 , F6 , F7 , B1 , B3 , C6 , D4 , D0 , D1 , D2 , D3 }
-#define MATRIX_ROW_PINS { B4 , B5 , B2 , B6 }
-#define DIODE_DIRECTION COL2ROW
-
#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/splitish/info.json b/keyboards/splitish/info.json
index 067b20c8cff7..d973c34ebafe 100644
--- a/keyboards/splitish/info.json
+++ b/keyboards/splitish/info.json
@@ -8,6 +8,11 @@
"pid": "0x6464",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "C6", "D4", "D0", "D1", "D2", "D3"],
+ "rows": ["B4", "B5", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/splitkb/kyria/rev1/config.h b/keyboards/splitkb/kyria/rev1/config.h
index 8ca0d50ea65a..dc83cf6b86b6 100644
--- a/keyboards/splitkb/kyria/rev1/config.h
+++ b/keyboards/splitkb/kyria/rev1/config.h
@@ -17,15 +17,6 @@ along with this program. If not, see .
#pragma once
-// wiring
-#define MATRIX_ROW_PINS \
- { B4, E6, D7, D4 }
-#define MATRIX_COL_PINS \
- { B6, B2, B3, B1, F7, F6, F5, F4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/*
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
*/
diff --git a/keyboards/splitkb/kyria/rev1/info.json b/keyboards/splitkb/kyria/rev1/info.json
index 895f9283ac1a..3a2b853eaccb 100644
--- a/keyboards/splitkb/kyria/rev1/info.json
+++ b/keyboards/splitkb/kyria/rev1/info.json
@@ -4,6 +4,11 @@
"pid": "0x9D9D",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+ "rows": ["B4", "E6", "D7", "D4"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "C6", "pin_b": "B5"}
diff --git a/keyboards/splitkb/kyria/rev2/config.h b/keyboards/splitkb/kyria/rev2/config.h
index 1799c6aa4969..8b878739fe0d 100644
--- a/keyboards/splitkb/kyria/rev2/config.h
+++ b/keyboards/splitkb/kyria/rev2/config.h
@@ -17,19 +17,6 @@ along with this program. If not, see .
#pragma once
-// wiring
-#define MATRIX_ROW_PINS \
- { F6, F7, B1, B3 }
-#define MATRIX_COL_PINS \
- { B2, B6, B5, B4, E6, D7, C6, D4 }
-#define MATRIX_ROW_PINS_RIGHT \
- { D4, C6, D7, E6 }
-#define MATRIX_COL_PINS_RIGHT \
- { B4, B5, B6, B2, B3, B1, F7, F6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
// Side detection
// col 4 row 3 on right-hand-side
#define SPLIT_HAND_MATRIX_GRID E6, B3 // row first because the board is col2row
diff --git a/keyboards/splitkb/kyria/rev2/info.json b/keyboards/splitkb/kyria/rev2/info.json
index d21d820804e0..c0aa1047c551 100644
--- a/keyboards/splitkb/kyria/rev2/info.json
+++ b/keyboards/splitkb/kyria/rev2/info.json
@@ -4,6 +4,11 @@
"pid": "0x9D9D",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["B2", "B6", "B5", "B4", "E6", "D7", "C6", "D4"],
+ "rows": ["F6", "F7", "B1", "B3"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "F4", "pin_b": "F5"}
@@ -16,6 +21,12 @@
{"pin_a": "F5", "pin_b": "F4"}
]
}
+ },
+ "matrix_pins": {
+ "right": {
+ "cols": ["B4", "B5", "B6", "B2", "B3", "B1", "F7", "F6"],
+ "rows": ["D4", "C6", "D7", "E6"]
+ }
}
},
"layouts": {
diff --git a/keyboards/splitty/config.h b/keyboards/splitty/config.h
index 3056705bb2a0..e190122bc847 100644
--- a/keyboards/splitty/config.h
+++ b/keyboards/splitty/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS \
- { F0, F1, D4, D5, D6 }
-#define MATRIX_COL_PINS \
- { B0, B1, B2, B3, B4, B5, B6 }
-#define DIODE_DIRECTION COL2ROW
-
/* Split Keyboard specific options. */
#define USE_I2C
#define EE_HANDS
diff --git a/keyboards/splitty/info.json b/keyboards/splitty/info.json
index bdcb13d044c8..a2983474bee6 100644
--- a/keyboards/splitty/info.json
+++ b/keyboards/splitty/info.json
@@ -8,6 +8,11 @@
"pid": "0x6052",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "B1", "B2", "B3", "B4", "B5", "B6"],
+ "rows": ["F0", "F1", "D4", "D5", "D6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/sporewoh/banime40/config.h b/keyboards/sporewoh/banime40/config.h
index 5059ce5d4e9f..75882003aad9 100644
--- a/keyboards/sporewoh/banime40/config.h
+++ b/keyboards/sporewoh/banime40/config.h
@@ -17,13 +17,4 @@ along with this program. If not, see .
#pragma once
-
-/* pin-out for PCB */
-#define MATRIX_ROW_PINS { E6, D7, C6, D4 }
-#define MATRIX_COL_PINS { B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 }
-
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 10
diff --git a/keyboards/sporewoh/banime40/info.json b/keyboards/sporewoh/banime40/info.json
index 71a30c5b32b3..726aef3e28c0 100644
--- a/keyboards/sporewoh/banime40/info.json
+++ b/keyboards/sporewoh/banime40/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B4", "B5", "B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+ "rows": ["E6", "D7", "C6", "D4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"community_layouts": ["ortho_4x10"],
diff --git a/keyboards/star75/config.h b/keyboards/star75/config.h
index e6162107051a..a9e98683c5e0 100644
--- a/keyboards/star75/config.h
+++ b/keyboards/star75/config.h
@@ -3,14 +3,6 @@ Copyright 2022 Horns Lyn (@hornslyn)
SPDX-License-Identifier: GPL-2.0-or-later */
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B7, D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1, F0, E6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/star75/info.json b/keyboards/star75/info.json
index 4bf206e4e588..1f28a2081934 100644
--- a/keyboards/star75/info.json
+++ b/keyboards/star75/info.json
@@ -8,6 +8,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1", "F0", "E6"],
+ "rows": ["B7", "D0", "D1", "D2", "D3", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B2", "pin_b": "B1"}
diff --git a/keyboards/stello65/beta/config.h b/keyboards/stello65/beta/config.h
index 4efc0635a179..61ebee945d93 100644
--- a/keyboards/stello65/beta/config.h
+++ b/keyboards/stello65/beta/config.h
@@ -3,23 +3,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F0, E6, D0, D1, C6, F7, F6, F5, F4, F1 }
-#define MATRIX_COL_PINS { C7, B6, B5, B4, D7, D6, D4, D5 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define ENCODERS_CW_KEY { { 4, 7 } }
#define ENCODERS_CCW_KEY { { 4, 6 } }
diff --git a/keyboards/stello65/beta/info.json b/keyboards/stello65/beta/info.json
index d4e73eba1d72..e01f7399ebff 100644
--- a/keyboards/stello65/beta/info.json
+++ b/keyboards/stello65/beta/info.json
@@ -8,6 +8,11 @@
"pid": "0x0003",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "B6", "B5", "B4", "D7", "D6", "D4", "D5"],
+ "rows": ["F0", "E6", "D0", "D1", "C6", "F7", "F6", "F5", "F4", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D3", "pin_b": "D2", "resolution": 2}
diff --git a/keyboards/stello65/hs_rev1/config.h b/keyboards/stello65/hs_rev1/config.h
index d076264be945..6511724728f0 100644
--- a/keyboards/stello65/hs_rev1/config.h
+++ b/keyboards/stello65/hs_rev1/config.h
@@ -3,23 +3,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F1, F0, D1, D2, B6, C6, C7, F7, F6, F5 }
-#define MATRIX_COL_PINS { E6, B5, B4, D7, D6, D4, D5, D3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D0
#ifdef RGB_DI_PIN
# define RGBLED_NUM 4
diff --git a/keyboards/stello65/hs_rev1/info.json b/keyboards/stello65/hs_rev1/info.json
index 218f2657ad36..17f48c644f4d 100644
--- a/keyboards/stello65/hs_rev1/info.json
+++ b/keyboards/stello65/hs_rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0004",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "B5", "B4", "D7", "D6", "D4", "D5", "D3"],
+ "rows": ["F1", "F0", "D1", "D2", "B6", "C6", "C7", "F7", "F6", "F5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/stello65/sl_rev1/config.h b/keyboards/stello65/sl_rev1/config.h
index de25e1504faf..0247bae3a139 100644
--- a/keyboards/stello65/sl_rev1/config.h
+++ b/keyboards/stello65/sl_rev1/config.h
@@ -3,23 +3,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F0, E6, D0, D1, C6, F7, F6, F5, F4, F1 }
-#define MATRIX_COL_PINS { C7, B4, D7, D6, D4, D5, D3, D2 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN B7
#ifdef RGB_DI_PIN
# define RGBLED_NUM 4
diff --git a/keyboards/stello65/sl_rev1/info.json b/keyboards/stello65/sl_rev1/info.json
index 647afe2e9c89..6d36772839b9 100644
--- a/keyboards/stello65/sl_rev1/info.json
+++ b/keyboards/stello65/sl_rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0005",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C7", "B4", "D7", "D6", "D4", "D5", "D3", "D2"],
+ "rows": ["F0", "E6", "D0", "D1", "C6", "F7", "F6", "F5", "F4", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/stenokeyboards/the_uni/pro_micro/config.h b/keyboards/stenokeyboards/the_uni/pro_micro/config.h
index 860b809ef34e..bf5b37166ad7 100644
--- a/keyboards/stenokeyboards/the_uni/pro_micro/config.h
+++ b/keyboards/stenokeyboards/the_uni/pro_micro/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F4, B2, B6 }
-#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B5, B4, E6, D7, C6, D4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/stenokeyboards/the_uni/pro_micro/info.json b/keyboards/stenokeyboards/the_uni/pro_micro/info.json
index e1dda21feba5..40dd660d0978 100644
--- a/keyboards/stenokeyboards/the_uni/pro_micro/info.json
+++ b/keyboards/stenokeyboards/the_uni/pro_micro/info.json
@@ -2,6 +2,11 @@
"usb": {
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "F6", "F7", "B1", "B3", "B5", "B4", "E6", "D7", "C6", "D4"],
+ "rows": ["F4", "B2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina"
}
diff --git a/keyboards/stenokeyboards/the_uni/rp_2040/config.h b/keyboards/stenokeyboards/the_uni/rp_2040/config.h
index 46c8a81a8427..a2c060d424cf 100644
--- a/keyboards/stenokeyboards/the_uni/rp_2040/config.h
+++ b/keyboards/stenokeyboards/the_uni/rp_2040/config.h
@@ -16,15 +16,10 @@
#pragma once
-#define MATRIX_COL_PINS { GP24, GP23, GP21, GP20, GP19, GP6, GP5, GP4, GP3, GP2, GP1 }
-#define MATRIX_ROW_PINS { GP25, GP18, GP17 }
// #define DEBUG_MATRIX_SCAN_RATE
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
//#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP25
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 500U
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define FORCE_NKRO
diff --git a/keyboards/stenokeyboards/the_uni/rp_2040/info.json b/keyboards/stenokeyboards/the_uni/rp_2040/info.json
index 642551468760..c48ad290f4bf 100644
--- a/keyboards/stenokeyboards/the_uni/rp_2040/info.json
+++ b/keyboards/stenokeyboards/the_uni/rp_2040/info.json
@@ -2,6 +2,11 @@
"usb": {
"device_version": "0.0.4"
},
+ "matrix_pins": {
+ "cols": ["GP24", "GP23", "GP21", "GP20", "GP19", "GP6", "GP5", "GP4", "GP3", "GP2", "GP1"],
+ "rows": ["GP25", "GP18", "GP17"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "RP2040",
"bootloader": "rp2040"
}
diff --git a/keyboards/stenokeyboards/the_uni/usb_c/config.h b/keyboards/stenokeyboards/the_uni/usb_c/config.h
index 94fa1c6b63bc..bf5b37166ad7 100644
--- a/keyboards/stenokeyboards/the_uni/usb_c/config.h
+++ b/keyboards/stenokeyboards/the_uni/usb_c/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B7, D6, C7 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, D5, D3, D2, D1, D0, D4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/stenokeyboards/the_uni/usb_c/info.json b/keyboards/stenokeyboards/the_uni/usb_c/info.json
index 14c0e6d7cb3f..ef761abe8a50 100644
--- a/keyboards/stenokeyboards/the_uni/usb_c/info.json
+++ b/keyboards/stenokeyboards/the_uni/usb_c/info.json
@@ -2,6 +2,11 @@
"usb": {
"device_version": "0.0.3"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "D5", "D3", "D2", "D1", "D0", "D4"],
+ "rows": ["B7", "D6", "C7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu"
}
diff --git a/keyboards/stratos/config.h b/keyboards/stratos/config.h
index 6cec383ec992..0f48233bf174 100644
--- a/keyboards/stratos/config.h
+++ b/keyboards/stratos/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { B1, B2, B3, F0, F1 }
-#define MATRIX_COL_PINS { F4, F7, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* RGB LEDs */
#ifdef RGBLIGHT_ENABLE
#define RGB_DI_PIN D2
diff --git a/keyboards/stratos/info.json b/keyboards/stratos/info.json
index 2f278e18e7fd..c7a490036ce3 100644
--- a/keyboards/stratos/info.json
+++ b/keyboards/stratos/info.json
@@ -8,6 +8,11 @@
"pid": "0x992D",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F7", "F5", "F6", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3"],
+ "rows": ["B1", "B2", "B3", "F0", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["60_ansi", "60_ansi_arrow", "60_ansi_tsangan", "60_tsangan_hhkb", "60_ansi_split_bs_rshift", "60_iso", "60_iso_split_bs_rshift", "60_iso_tsangan"],
diff --git a/keyboards/studiokestra/bourgeau/config.h b/keyboards/studiokestra/bourgeau/config.h
index 45c78b063f6a..e17664611cbc 100644
--- a/keyboards/studiokestra/bourgeau/config.h
+++ b/keyboards/studiokestra/bourgeau/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_ROW_PINS { D4, D6, D7, D5, B1, F0 }
-#define MATRIX_COL_PINS { E6, B0, D2, D1, D0, D3, B6, F1, F4, F5, F6, F7, C7, C6, B5, B4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-
#define RGB_DI_PIN B7
#ifdef RGB_DI_PIN
#define RGBLED_NUM 24
diff --git a/keyboards/studiokestra/bourgeau/info.json b/keyboards/studiokestra/bourgeau/info.json
index 0cde6da6847f..6f19e91dd77f 100644
--- a/keyboards/studiokestra/bourgeau/info.json
+++ b/keyboards/studiokestra/bourgeau/info.json
@@ -8,6 +8,11 @@
"pid": "0x7501",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "B0", "D2", "D1", "D0", "D3", "B6", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B5", "B4"],
+ "rows": ["D4", "D6", "D7", "D5", "B1", "F0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/studiokestra/cascade/config.h b/keyboards/studiokestra/cascade/config.h
index 1ef5926c8e8b..d48b336fe73f 100644
--- a/keyboards/studiokestra/cascade/config.h
+++ b/keyboards/studiokestra/cascade/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_ROW_PINS { F0, B1, D4, F4, F1 }
-#define MATRIX_COL_PINS { E6, D5, D1, D0, F5, F6, F7, C7, C6, B6, B5, B4, D6, D7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-
#define RGB_DI_PIN B0
#ifdef RGB_DI_PIN
#define RGBLED_NUM 16
diff --git a/keyboards/studiokestra/cascade/info.json b/keyboards/studiokestra/cascade/info.json
index 096e20a27ba7..1cda31cab74d 100644
--- a/keyboards/studiokestra/cascade/info.json
+++ b/keyboards/studiokestra/cascade/info.json
@@ -8,6 +8,11 @@
"pid": "0x6001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "D5", "D1", "D0", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D6", "D7"],
+ "rows": ["F0", "B1", "D4", "F4", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/studiokestra/galatea/config.h b/keyboards/studiokestra/galatea/config.h
index 7c5b4dbb2944..e95d41f6de57 100644
--- a/keyboards/studiokestra/galatea/config.h
+++ b/keyboards/studiokestra/galatea/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, B2, D5 }
-#define MATRIX_ROW_PINS { D1, D0, B0, B7, E6, B3, B6, C6, D6, D7, B4, D3 }
-#define DIODE_DIRECTION COL2ROW
-
#if defined(KEYBOARD_studiokestra_galatea_rev2)
#define RGB_DI_PIN D4
#define RGBLED_NUM 24
diff --git a/keyboards/studiokestra/galatea/rev1/info.json b/keyboards/studiokestra/galatea/rev1/info.json
index ce1b7f581602..e6a1899e5509 100644
--- a/keyboards/studiokestra/galatea/rev1/info.json
+++ b/keyboards/studiokestra/galatea/rev1/info.json
@@ -8,6 +8,11 @@
"pid": "0x8801",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "B2", "D5"],
+ "rows": ["D1", "D0", "B0", "B7", "E6", "B3", "B6", "C6", "D6", "D7", "B4", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B5",
"scroll_lock": "D2",
diff --git a/keyboards/studiokestra/galatea/rev2/info.json b/keyboards/studiokestra/galatea/rev2/info.json
index dc3865c584a5..ae1dee5aa06a 100644
--- a/keyboards/studiokestra/galatea/rev2/info.json
+++ b/keyboards/studiokestra/galatea/rev2/info.json
@@ -8,6 +8,11 @@
"pid": "0x8802",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "B2", "D5"],
+ "rows": ["D1", "D0", "B0", "B7", "E6", "B3", "B6", "C6", "D6", "D7", "B4", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B5",
"scroll_lock": "D2",
diff --git a/keyboards/studiokestra/nascent/config.h b/keyboards/studiokestra/nascent/config.h
index 5bb31afde592..f1b419a3e207 100644
--- a/keyboards/studiokestra/nascent/config.h
+++ b/keyboards/studiokestra/nascent/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_COL_PINS { D2, D3, D7, D6, D4, D5, B0, E6 }
-#define MATRIX_ROW_PINS { F5, F4, F7, F6, C6, C7, B4, B5, D0, D1 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/studiokestra/nascent/info.json b/keyboards/studiokestra/nascent/info.json
index 43aba81924e8..69d74f9fca4f 100644
--- a/keyboards/studiokestra/nascent/info.json
+++ b/keyboards/studiokestra/nascent/info.json
@@ -8,6 +8,11 @@
"pid": "0x0165",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D2", "D3", "D7", "D6", "D4", "D5", "B0", "E6"],
+ "rows": ["F5", "F4", "F7", "F6", "C6", "C7", "B4", "B5", "D0", "D1"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B6",
"on_state": 0
diff --git a/keyboards/studiokestra/nue/config.h b/keyboards/studiokestra/nue/config.h
index 0165b7cef4e4..e2d4270dd62d 100644
--- a/keyboards/studiokestra/nue/config.h
+++ b/keyboards/studiokestra/nue/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_COL_PINS { F0, F6, F7, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7 }
-#define MATRIX_ROW_PINS { B0, B7, F1, F5, F4}
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/studiokestra/nue/info.json b/keyboards/studiokestra/nue/info.json
index bff06e269d12..c4cbd11a7b0c 100644
--- a/keyboards/studiokestra/nue/info.json
+++ b/keyboards/studiokestra/nue/info.json
@@ -8,6 +8,11 @@
"pid": "0x0701",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F6", "F7", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7"],
+ "rows": ["B0", "B7", "F1", "F5", "F4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/suavity/ehan/config.h b/keyboards/suavity/ehan/config.h
index 6041beba7f42..befff72ca814 100644
--- a/keyboards/suavity/ehan/config.h
+++ b/keyboards/suavity/ehan/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-#define MATRIX_COL_PINS { A10, A9, A8, B15, B14, B13, B12, C14, B7, B6, B5, B4, B3, A15, C13, B9, B8 }
-// Matrix Column Pins: C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 C16
-#define MATRIX_ROW_PINS { A7, B0, A3, A4, A5, A6 }
-// Matrix Row Pins: R0 R1 R2 R3 R4 R5
-#define DIODE_DIRECTION COL2ROW
-// Current flow out of the diodes are from rows to columns
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/suavity/ehan/info.json b/keyboards/suavity/ehan/info.json
index 492165be2b7d..330809655ccd 100755
--- a/keyboards/suavity/ehan/info.json
+++ b/keyboards/suavity/ehan/info.json
@@ -8,6 +8,11 @@
"pid": "0x4548",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A10", "A9", "A8", "B15", "B14", "B13", "B12", "C14", "B7", "B6", "B5", "B4", "B3", "A15", "C13", "B9", "B8"],
+ "rows": ["A7", "B0", "A3", "A4", "A5", "A6"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B11",
"scroll_lock": "F1"
diff --git a/keyboards/subatomic/config.h b/keyboards/subatomic/config.h
index 058b582c361c..b0c6bce36a60 100644
--- a/keyboards/subatomic/config.h
+++ b/keyboards/subatomic/config.h
@@ -17,17 +17,9 @@ along with this program. If not, see .
#pragma once
-
-/* Planck PCB default pin-out */
-#define MATRIX_ROW_PINS { D2, D5, B5, B6, D3 }
-#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7, C6, C5 }
-
// #define AUDIO_VOICES
// #define AUDIO_PIN C6
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/subatomic/info.json b/keyboards/subatomic/info.json
index 99af17a9b736..483d7689f1e0 100644
--- a/keyboards/subatomic/info.json
+++ b/keyboards/subatomic/info.json
@@ -8,6 +8,11 @@
"pid": "0x6063",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F1", "F0", "B0", "C7", "F4", "F5", "F6", "F7", "D4", "D6", "B4", "D7", "C6", "C5"],
+ "rows": ["D2", "D5", "B5", "B6", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7"
},
diff --git a/keyboards/subrezon/la_nc/config.h b/keyboards/subrezon/la_nc/config.h
deleted file mode 100644
index 7e45963ed7c6..000000000000
--- a/keyboards/subrezon/la_nc/config.h
+++ /dev/null
@@ -1,19 +0,0 @@
-// Copyright 2022 Daniel Osipishin (@subrezon)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-
-// key matrix
-#define MATRIX_ROW_PINS {D3, F4, D2, B2, B5, B6}
-
-#define MATRIX_COL_PINS {B3, B1, F7, F6, F5, D4, C6, D7, E6, B4}
-
-#define DIODE_DIRECTION COL2ROW
-
-// uncomment to reduce firmware size
-//#define NO_DEBUG
-//#define NO_PRINT
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
diff --git a/keyboards/subrezon/la_nc/info.json b/keyboards/subrezon/la_nc/info.json
index b0a8eb7daabd..3d735868150f 100644
--- a/keyboards/subrezon/la_nc/info.json
+++ b/keyboards/subrezon/la_nc/info.json
@@ -6,6 +6,11 @@
"pid": "0x1A7C",
"device_version": "1.0.0"
},
+ "matrix_pins": {
+ "cols": ["B3", "B1", "F7", "F6", "F5", "D4", "C6", "D7", "E6", "B4"],
+ "rows": ["D3", "F4", "D2", "B2", "B5", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/superuser/ext/config.h b/keyboards/superuser/ext/config.h
deleted file mode 100644
index 0bcd052fed10..000000000000
--- a/keyboards/superuser/ext/config.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
-Copyright 2021 superuser
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { B2, B1, F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, E6, B0, B3}
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/superuser/ext/info.json b/keyboards/superuser/ext/info.json
index 57d4ccbb18b2..990e210f024f 100644
--- a/keyboards/superuser/ext/info.json
+++ b/keyboards/superuser/ext/info.json
@@ -8,6 +8,11 @@
"pid": "0x4558",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "B1", "F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "E6", "B0", "B3"],
+ "rows": ["D0", "D1", "D2", "D3", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B7"
},
diff --git a/keyboards/superuser/frl/config.h b/keyboards/superuser/frl/config.h
deleted file mode 100644
index 607133eaf8b4..000000000000
--- a/keyboards/superuser/frl/config.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
-Copyright 2021 superuser
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, E6, B0, B3}
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/superuser/frl/info.json b/keyboards/superuser/frl/info.json
index 14c7b1e54f3c..e4c752140e3c 100644
--- a/keyboards/superuser/frl/info.json
+++ b/keyboards/superuser/frl/info.json
@@ -8,6 +8,11 @@
"pid": "0x4652",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "E6", "B0", "B3"],
+ "rows": ["D0", "D1", "D2", "D3", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B7"
},
diff --git a/keyboards/superuser/tkl/config.h b/keyboards/superuser/tkl/config.h
deleted file mode 100644
index 665276c79d5b..000000000000
--- a/keyboards/superuser/tkl/config.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
-Copyright 2021 superuser
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B2, D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, E6, B0, B3}
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/superuser/tkl/info.json b/keyboards/superuser/tkl/info.json
index 6e94c7a28e83..1469c7c95a0f 100644
--- a/keyboards/superuser/tkl/info.json
+++ b/keyboards/superuser/tkl/info.json
@@ -8,6 +8,11 @@
"pid": "0x544B",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "E6", "B0", "B3"],
+ "rows": ["B2", "D0", "D1", "D2", "D3", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B7"
},
diff --git a/keyboards/swiftrax/retropad/config.h b/keyboards/swiftrax/retropad/config.h
index f963856c97cc..66a3ef6740ed 100644
--- a/keyboards/swiftrax/retropad/config.h
+++ b/keyboards/swiftrax/retropad/config.h
@@ -17,15 +17,6 @@ along with this program. If not, see .
#pragma once
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS { C7, C6, B5 }
-#define MATRIX_COL_PINS { B4, D2 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN B7
#ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/swiftrax/retropad/info.json b/keyboards/swiftrax/retropad/info.json
index ea43a71b12b4..96f523fb4b84 100644
--- a/keyboards/swiftrax/retropad/info.json
+++ b/keyboards/swiftrax/retropad/info.json
@@ -8,6 +8,11 @@
"pid": "0xEB0C",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B4", "D2"],
+ "rows": ["C7", "C6", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D0", "pin_b": "D1"}
diff --git a/keyboards/switchplate/southpaw_65/config.h b/keyboards/switchplate/southpaw_65/config.h
index 598ac367b30e..12b18b0cbae5 100644
--- a/keyboards/switchplate/southpaw_65/config.h
+++ b/keyboards/switchplate/southpaw_65/config.h
@@ -21,22 +21,6 @@
#define MATRIX_ROWS 5
#define MATRIX_COLS 19
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-//#define MATRIX_ROW_PINS { D0, D5 }
-//#define MATRIX_COL_PINS { F1, F0, B0 }
-
-/* COL2ROW, ROW2COL */
-//#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN C7
#define RGBLED_NUM 9
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/switchplate/southpaw_fullsize/config.h b/keyboards/switchplate/southpaw_fullsize/config.h
index 92247d7951c1..8abadb95221c 100644
--- a/keyboards/switchplate/southpaw_fullsize/config.h
+++ b/keyboards/switchplate/southpaw_fullsize/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { E1, C0, C1, C2, C3, C4 }
-#define MATRIX_COL_PINS { A7, C7, C6, C5, F0, F1, F2, F3, F4, F5, F6, F7, A0, A1, A2, A3, A4, A5, A6, E0, D7, D6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/switchplate/southpaw_fullsize/info.json b/keyboards/switchplate/southpaw_fullsize/info.json
index 1b1cda7d2f67..756ee8490684 100644
--- a/keyboards/switchplate/southpaw_fullsize/info.json
+++ b/keyboards/switchplate/southpaw_fullsize/info.json
@@ -8,6 +8,11 @@
"pid": "0x0017",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A7", "C7", "C6", "C5", "F0", "F1", "F2", "F3", "F4", "F5", "F6", "F7", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "E0", "D7", "D6"],
+ "rows": ["E1", "C0", "C1", "C2", "C3", "C4"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7"
},
diff --git a/keyboards/switchplate/switchplate910/config.h b/keyboards/switchplate/switchplate910/config.h
index adb547468a6e..ef90a43c6f2d 100644
--- a/keyboards/switchplate/switchplate910/config.h
+++ b/keyboards/switchplate/switchplate910/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, F5, F6, F7, D1 }
-#define MATRIX_COL_PINS { D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, B3, B2, B0, B1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/switchplate/switchplate910/info.json b/keyboards/switchplate/switchplate910/info.json
index 580747109411..b324cc64159f 100644
--- a/keyboards/switchplate/switchplate910/info.json
+++ b/keyboards/switchplate/switchplate910/info.json
@@ -8,6 +8,11 @@
"pid": "0x2065",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "B3", "B2", "B0", "B1"],
+ "rows": ["F4", "F5", "F6", "F7", "D1"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7"
},
diff --git a/keyboards/synapse/config.h b/keyboards/synapse/config.h
index f9b40cedee9b..9f86bdabd72a 100644
--- a/keyboards/synapse/config.h
+++ b/keyboards/synapse/config.h
@@ -16,14 +16,4 @@
#pragma once
-
-#define MATRIX_ROW_PINS \
- { E6, B0, F4, F1 }
-#define MATRIX_COL_PINS \
- { F0, D4, F5, B1, B2, B3, B7, D0, D1, D2, D3, B6 }
-
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/synapse/info.json b/keyboards/synapse/info.json
index ff629b48c552..8f207c975b1a 100644
--- a/keyboards/synapse/info.json
+++ b/keyboards/synapse/info.json
@@ -8,6 +8,11 @@
"pid": "0x5359",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "D4", "F5", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "B6"],
+ "rows": ["E6", "B0", "F4", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D7", "pin_b": "D6"},
diff --git a/keyboards/system76/launch_1/config.h b/keyboards/system76/launch_1/config.h
index 886b5e2b7859..10b1036c729f 100644
--- a/keyboards/system76/launch_1/config.h
+++ b/keyboards/system76/launch_1/config.h
@@ -17,22 +17,6 @@
#pragma once
-
-/*
- * Key matrix pins
- * ROWS: AVR pins used for rows, top to bottom
- * COLS: AVR pins used for columns, left to right
- */
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { D7, C7, C6, B6, B5, B4, D6, D4, E6, D5, D3, D2, B7, B0 }
-
-/*
- * Diode Direction
- * COL2ROW = COL => Anode (+), ROW => Cathode (-)
- * ROW2COL = ROW => Anode (+), COL => Cathode (-)
- */
-#define DIODE_DIRECTION COL2ROW
-
#ifdef RGB_MATRIX_ENABLE
# define RGB_DI_PIN E2
# define RGB_MATRIX_LED_COUNT 84
diff --git a/keyboards/system76/launch_1/info.json b/keyboards/system76/launch_1/info.json
index e61caec07c60..e6c8743541e7 100644
--- a/keyboards/system76/launch_1/info.json
+++ b/keyboards/system76/launch_1/info.json
@@ -7,6 +7,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D7", "C7", "C6", "B6", "B5", "B4", "D6", "D4", "E6", "D5", "D3", "D2", "B7", "B0"],
+ "rows": ["F0", "F1", "F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/w1_at/config.h b/keyboards/w1_at/config.h
index e272a69ec9ee..79fdc4275fe9 100644
--- a/keyboards/w1_at/config.h
+++ b/keyboards/w1_at/config.h
@@ -17,12 +17,5 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_ROW_PINS { A2, B9, B8, B5, B4 }
-#define MATRIX_COL_PINS { B7, A0, A1, B1, B0, A7, A6, A5, A4, A3, B2, B10, B11, B12, B13, B14, B15, A8, A9, A10 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
diff --git a/keyboards/w1_at/info.json b/keyboards/w1_at/info.json
index a922e0f4c93e..0f7bdfb85474 100644
--- a/keyboards/w1_at/info.json
+++ b/keyboards/w1_at/info.json
@@ -8,6 +8,11 @@
"pid": "0x5754",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B7", "A0", "A1", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "B2", "B10", "B11", "B12", "B13", "B14", "B15", "A8", "A9", "A10"],
+ "rows": ["A2", "B9", "B8", "B5", "B4"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "B6",
"num_lock": "B3",
diff --git a/keyboards/waldo/config.h b/keyboards/waldo/config.h
index 028b00de1000..097b1818aed3 100644
--- a/keyboards/waldo/config.h
+++ b/keyboards/waldo/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* Planck PCB default pin-out */
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
-#define MATRIX_COL_PINS { F7, D5, D3, D2, B3, B2, C7, C6, B6, B5, B4, D7, D6, D4, B1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/waldo/info.json b/keyboards/waldo/info.json
index 0c85e1d8d51f..6ee9b4befd36 100644
--- a/keyboards/waldo/info.json
+++ b/keyboards/waldo/info.json
@@ -7,6 +7,11 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F7", "D5", "D3", "D2", "B3", "B2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B1"],
+ "rows": ["F0", "F1", "F4", "F5", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"breathing": true
diff --git a/keyboards/walletburner/cajal/config.h b/keyboards/walletburner/cajal/config.h
index 61e2d421aebb..9b9506927fa7 100644
--- a/keyboards/walletburner/cajal/config.h
+++ b/keyboards/walletburner/cajal/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D4, D5, C7, C6 }
-#define MATRIX_COL_PINS { F4, F1, F0, E6, B0, B1, B2, B3, D0, D1, D2, D3, B4, F6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/walletburner/cajal/info.json b/keyboards/walletburner/cajal/info.json
index 7aa0563d4c52..bba30bebcd9f 100644
--- a/keyboards/walletburner/cajal/info.json
+++ b/keyboards/walletburner/cajal/info.json
@@ -8,6 +8,11 @@
"pid": "0x6361",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F1", "F0", "E6", "B0", "B1", "B2", "B3", "D0", "D1", "D2", "D3", "B4", "F6"],
+ "rows": ["D4", "D5", "C7", "C6"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D6", "pin_b": "D7"}
diff --git a/keyboards/walletburner/neuron/config.h b/keyboards/walletburner/neuron/config.h
index 84f344473081..905e59e17e4e 100644
--- a/keyboards/walletburner/neuron/config.h
+++ b/keyboards/walletburner/neuron/config.h
@@ -1,13 +1,5 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D0, D1, D3, F5 }
-#define MATRIX_COL_PINS { F0, F7, F6, F4, F1, E6, D6, D2, B4, D7, B6, D5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/walletburner/neuron/info.json b/keyboards/walletburner/neuron/info.json
index dd746f4c4b0d..0b7ee467f686 100644
--- a/keyboards/walletburner/neuron/info.json
+++ b/keyboards/walletburner/neuron/info.json
@@ -8,6 +8,11 @@
"pid": "0x6E75",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F7", "F6", "F4", "F1", "E6", "D6", "D2", "B4", "D7", "B6", "D5"],
+ "rows": ["D0", "D1", "D3", "F5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/waterfowl/config.h b/keyboards/waterfowl/config.h
index 62f5ba6633c7..40d9a4b8da47 100644
--- a/keyboards/waterfowl/config.h
+++ b/keyboards/waterfowl/config.h
@@ -16,13 +16,6 @@
#pragma once
-// Wiring
-#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1 }
-
-// COL2ROW, ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
#define OLED_DISPLAY_128X64
#define SPLIT_MODS_ENABLE
#define SPLIT_WPM_ENABLE
diff --git a/keyboards/waterfowl/info.json b/keyboards/waterfowl/info.json
index 17f01e24e2df..0ee5b095b113 100644
--- a/keyboards/waterfowl/info.json
+++ b/keyboards/waterfowl/info.json
@@ -8,6 +8,11 @@
"pid": "0x9CE3",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1"],
+ "rows": ["D4", "C6", "D7", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B4", "pin_b": "B5"},
diff --git a/keyboards/wavtype/foundation/config.h b/keyboards/wavtype/foundation/config.h
index 7c189d3ad1c8..91ce68b9386a 100644
--- a/keyboards/wavtype/foundation/config.h
+++ b/keyboards/wavtype/foundation/config.h
@@ -3,23 +3,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B3, B2, B1, F0, F1 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, D2, D1, D0, D3, D5, D4, B7, D6, D7, B4, B5, B6, C6, C7 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN B0
#ifdef RGB_DI_PIN
# define RGBLED_NUM 16
diff --git a/keyboards/wavtype/foundation/info.json b/keyboards/wavtype/foundation/info.json
index 36153f2bca16..3b770ae352ac 100644
--- a/keyboards/wavtype/foundation/info.json
+++ b/keyboards/wavtype/foundation/info.json
@@ -8,6 +8,11 @@
"pid": "0x0003",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "D2", "D1", "D0", "D3", "D5", "D4", "B7", "D6", "D7", "B4", "B5", "B6", "C6", "C7"],
+ "rows": ["B3", "B2", "B1", "F0", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"bootmagic": {
"matrix": [0, 1]
},
diff --git a/keyboards/wavtype/p01_ultra/config.h b/keyboards/wavtype/p01_ultra/config.h
index ad046b7fd199..534b0f83dad6 100644
--- a/keyboards/wavtype/p01_ultra/config.h
+++ b/keyboards/wavtype/p01_ultra/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B4, D7, D6, B5, B6, D4 }
-#define MATRIX_COL_PINS { C6, C7, F7, F6, F5, F4, F1, F0, B3, B2, B1, B0, B7, D0, D1, D2, D3, D5 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
#define RGB_DI_PIN E6
#ifdef RGB_DI_PIN
# define RGBLED_NUM 18
diff --git a/keyboards/wavtype/p01_ultra/info.json b/keyboards/wavtype/p01_ultra/info.json
index d88ac83836bb..1c27944c7698 100644
--- a/keyboards/wavtype/p01_ultra/info.json
+++ b/keyboards/wavtype/p01_ultra/info.json
@@ -8,6 +8,11 @@
"pid": "0x0004",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "C7", "F7", "F6", "F5", "F4", "F1", "F0", "B3", "B2", "B1", "B0", "B7", "D0", "D1", "D2", "D3", "D5"],
+ "rows": ["B4", "D7", "D6", "B5", "B6", "D4"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/weirdo/geminate60/config.h b/keyboards/weirdo/geminate60/config.h
index f187c1b234c9..fd3f070d3538 100644
--- a/keyboards/weirdo/geminate60/config.h
+++ b/keyboards/weirdo/geminate60/config.h
@@ -15,10 +15,6 @@
*/
#pragma once
-#define MATRIX_ROW_PINS { A9, A10, B10, B11, B15}
-#define MATRIX_COL_PINS { A8, B14, B13, B12, B1, B0, A7 , A1 , A15, B3, B4, B5, B6, B7, B8}
-#define DIODE_DIRECTION ROW2COL
-
#define RGB_DI_PIN A6
#define RGBLED_NUM 1
//#define RGBLIGHT_DISABLE_KEYCODES
diff --git a/keyboards/weirdo/geminate60/info.json b/keyboards/weirdo/geminate60/info.json
index 890a01786722..76de73c51e2b 100644
--- a/keyboards/weirdo/geminate60/info.json
+++ b/keyboards/weirdo/geminate60/info.json
@@ -8,6 +8,11 @@
"pid": "0x676D",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A8", "B14", "B13", "B12", "B1", "B0", "A7", "A1", "A15", "B3", "B4", "B5", "B6", "B7", "B8"],
+ "rows": ["A9", "A10", "B10", "B11", "B15"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"board": "QMK_PROTON_C",
diff --git a/keyboards/weirdo/kelowna/rgb64/config.h b/keyboards/weirdo/kelowna/rgb64/config.h
index 92fa599442c7..e3e65a074bd2 100644
--- a/keyboards/weirdo/kelowna/rgb64/config.h
+++ b/keyboards/weirdo/kelowna/rgb64/config.h
@@ -15,10 +15,6 @@
*/
#pragma once
-#define MATRIX_COL_PINS { A3, A4, A5, A7, B0, B1, B10, B15, A8, A9, A10, B7, B6, B5, B4}
-#define MATRIX_ROW_PINS { B12, B13, B14, C11, A1}
-#define DIODE_DIRECTION ROW2COL
-
#define RGB_DI_PIN A6
#define RGBLED_NUM 64
//#define RGBLIGHT_DISABLE_KEYCODES
diff --git a/keyboards/weirdo/kelowna/rgb64/info.json b/keyboards/weirdo/kelowna/rgb64/info.json
index 934da67ee451..ff6b6b0f85e7 100644
--- a/keyboards/weirdo/kelowna/rgb64/info.json
+++ b/keyboards/weirdo/kelowna/rgb64/info.json
@@ -8,6 +8,11 @@
"pid": "0x4C64",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A3", "A4", "A5", "A7", "B0", "B1", "B10", "B15", "A8", "A9", "A10", "B7", "B6", "B5", "B4"],
+ "rows": ["B12", "B13", "B14", "C11", "A1"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"board": "QMK_PROTON_C",
diff --git a/keyboards/weirdo/ls_60/config.h b/keyboards/weirdo/ls_60/config.h
index 46340f783376..93b7d5c69e8e 100644
--- a/keyboards/weirdo/ls_60/config.h
+++ b/keyboards/weirdo/ls_60/config.h
@@ -15,10 +15,6 @@
*/
#pragma once
-#define MATRIX_ROW_PINS { A9, A10, B10, B11, B15}
-#define MATRIX_COL_PINS { A8, B14, B13, B12, B1, B0, A7 , A1 , A15, B3, B4, B5, B6, B7, B8}
-#define DIODE_DIRECTION ROW2COL
-
#define RGB_DI_PIN A6
#define RGBLED_NUM 1
//#define RGBLIGHT_DISABLE_KEYCODES
diff --git a/keyboards/weirdo/ls_60/info.json b/keyboards/weirdo/ls_60/info.json
index 906a99388422..a9247037fc45 100644
--- a/keyboards/weirdo/ls_60/info.json
+++ b/keyboards/weirdo/ls_60/info.json
@@ -8,6 +8,11 @@
"pid": "0x4C53",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A8", "B14", "B13", "B12", "B1", "B0", "A7", "A1", "A15", "B3", "B4", "B5", "B6", "B7", "B8"],
+ "rows": ["A9", "A10", "B10", "B11", "B15"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"board": "QMK_PROTON_C",
diff --git a/keyboards/weirdo/naiping/np64/config.h b/keyboards/weirdo/naiping/np64/config.h
index 8fa16298e270..2b4073cbd68b 100644
--- a/keyboards/weirdo/naiping/np64/config.h
+++ b/keyboards/weirdo/naiping/np64/config.h
@@ -15,10 +15,6 @@
*/
#pragma once
-#define MATRIX_ROW_PINS { E6, B7, F7, F4, F5 }
-#define MATRIX_COL_PINS { F6, B0, F1, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1 }
-#define DIODE_DIRECTION ROW2COL
-
#define RGB_DI_PIN B1
#define RGBLED_NUM 80
//#define RGBLIGHT_DISABLE_KEYCODES
diff --git a/keyboards/weirdo/naiping/np64/info.json b/keyboards/weirdo/naiping/np64/info.json
index c188d4bb11f3..0c1bf74f3cdf 100644
--- a/keyboards/weirdo/naiping/np64/info.json
+++ b/keyboards/weirdo/naiping/np64/info.json
@@ -8,6 +8,11 @@
"pid": "0x7064",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F6", "B0", "F1", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1"],
+ "rows": ["E6", "B7", "F7", "F4", "F5"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"board": "QMK_PROTON_C",
diff --git a/keyboards/weirdo/naiping/nphhkb/config.h b/keyboards/weirdo/naiping/nphhkb/config.h
index 43b8d1c32e8b..683ba29edc5c 100644
--- a/keyboards/weirdo/naiping/nphhkb/config.h
+++ b/keyboards/weirdo/naiping/nphhkb/config.h
@@ -15,10 +15,6 @@
*/
#pragma once
-#define MATRIX_COL_PINS { A4, C15, C14, A5, A6, A15, B1, B10, B12, B13, B14, B15, B6, A8, B5}
-#define MATRIX_ROW_PINS { B7, B8, B9, C13, B4}
-#define DIODE_DIRECTION ROW2COL
-
#define RGB_DI_PIN A7
#define RGBLED_NUM 78
//#define RGBLIGHT_DISABLE_KEYCODES
diff --git a/keyboards/weirdo/naiping/nphhkb/info.json b/keyboards/weirdo/naiping/nphhkb/info.json
index b1b1c1f23d7d..c0df6fb453f9 100644
--- a/keyboards/weirdo/naiping/nphhkb/info.json
+++ b/keyboards/weirdo/naiping/nphhkb/info.json
@@ -8,6 +8,11 @@
"pid": "0x7068",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A4", "C15", "C14", "A5", "A6", "A15", "B1", "B10", "B12", "B13", "B14", "B15", "B6", "A8", "B5"],
+ "rows": ["B7", "B8", "B9", "C13", "B4"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"board": "QMK_PROTON_C",
diff --git a/keyboards/weirdo/naiping/npminila/config.h b/keyboards/weirdo/naiping/npminila/config.h
index 265ae2e2074f..fd2dcbdde196 100644
--- a/keyboards/weirdo/naiping/npminila/config.h
+++ b/keyboards/weirdo/naiping/npminila/config.h
@@ -15,10 +15,6 @@
*/
#pragma once
-#define MATRIX_ROW_PINS { E6, B7, F7, F4, F5 }
-#define MATRIX_COL_PINS { F6, B0, F1, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2 }
-#define DIODE_DIRECTION ROW2COL
-
#define RGB_DI_PIN D1
#define RGBLED_NUM 82
//#define RGBLIGHT_DISABLE_KEYCODES
diff --git a/keyboards/weirdo/naiping/npminila/info.json b/keyboards/weirdo/naiping/npminila/info.json
index 9904ca28fcaa..7c489e378c4f 100644
--- a/keyboards/weirdo/naiping/npminila/info.json
+++ b/keyboards/weirdo/naiping/npminila/info.json
@@ -8,6 +8,11 @@
"pid": "0x706D",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F6", "B0", "F1", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2"],
+ "rows": ["E6", "B7", "F7", "F4", "F5"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"board": "QMK_PROTON_C",
diff --git a/keyboards/weirdo/tiger910/config.h b/keyboards/weirdo/tiger910/config.h
index 34f2b70605f1..e484ffe49edd 100644
--- a/keyboards/weirdo/tiger910/config.h
+++ b/keyboards/weirdo/tiger910/config.h
@@ -17,13 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 }
-#define MATRIX_COL_PINS { B5, B6, B7, C0, C1, C2, C3, C4, C5, C6, C7, D0, D1, D2, D3, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/weirdo/tiger910/info.json b/keyboards/weirdo/tiger910/info.json
index 9634cc6f9af5..d09e61840873 100644
--- a/keyboards/weirdo/tiger910/info.json
+++ b/keyboards/weirdo/tiger910/info.json
@@ -8,6 +8,11 @@
"pid": "0x5447",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B5", "B6", "B7", "C0", "C1", "C2", "C3", "C4", "C5", "C6", "C7", "D0", "D1", "D2", "D3", "D4"],
+ "rows": ["B0", "B1", "B2", "B3", "B4"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/wekey/polaris/config.h b/keyboards/wekey/polaris/config.h
index e43421638eb5..c86ead57bd89 100644
--- a/keyboards/wekey/polaris/config.h
+++ b/keyboards/wekey/polaris/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F4, F1, F0, B7, F7, D5, C6, C7, F5, F6 }
-#define MATRIX_COL_PINS { E6, B4, B5, B6, D0, D1, D2, D3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wekey/polaris/info.json b/keyboards/wekey/polaris/info.json
index ad7477b5fc4f..11a7ca9b9da2 100644
--- a/keyboards/wekey/polaris/info.json
+++ b/keyboards/wekey/polaris/info.json
@@ -8,6 +8,11 @@
"pid": "0x0002",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "B4", "B5", "B6", "D0", "D1", "D2", "D3"],
+ "rows": ["F4", "F1", "F0", "B7", "F7", "D5", "C6", "C7", "F5", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["60_ansi", "60_ansi_split_bs_rshift", "60_tsangan_hhkb"],
diff --git a/keyboards/wekey/we27/config.h b/keyboards/wekey/we27/config.h
index c720fc2103d1..86f2ffb3ee42 100644
--- a/keyboards/wekey/we27/config.h
+++ b/keyboards/wekey/we27/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F1, D7, B4, B5, B6, F6 }
-#define MATRIX_COL_PINS { F4, F5, C7, D6, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#ifdef RGB_MATRIX_ENABLE
// The pin connected to the data pin of the LEDs
#define RGB_DI_PIN C6
diff --git a/keyboards/wekey/we27/info.json b/keyboards/wekey/we27/info.json
index 0a114ad5487d..736b7f5d70b0 100644
--- a/keyboards/wekey/we27/info.json
+++ b/keyboards/wekey/we27/info.json
@@ -8,6 +8,11 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F5", "C7", "D6", "D4"],
+ "rows": ["F1", "D7", "B4", "B5", "B6", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D3", "pin_b": "D2", "resolution": 2}
diff --git a/keyboards/westfoxtrot/aanzee/config.h b/keyboards/westfoxtrot/aanzee/config.h
index 70f820c25ef9..c1e79e76991e 100644
--- a/keyboards/westfoxtrot/aanzee/config.h
+++ b/keyboards/westfoxtrot/aanzee/config.h
@@ -17,15 +17,6 @@ along with this program. If not, see .
#pragma once
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS {B4,D7,D6,D4,B3}
-#define MATRIX_COL_PINS {D2,D1,D0,D3,D5,C7,C6,B6,B5,F0,F1,F4,F5,F6,F7,B0}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN E6
#ifdef RGB_DI_PIN
#define RGBLED_NUM 9
diff --git a/keyboards/westfoxtrot/aanzee/info.json b/keyboards/westfoxtrot/aanzee/info.json
index 4c3e9bf058ef..a2b5f6b49cd4 100644
--- a/keyboards/westfoxtrot/aanzee/info.json
+++ b/keyboards/westfoxtrot/aanzee/info.json
@@ -8,6 +8,11 @@
"pid": "0xAA01",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D2", "D1", "D0", "D3", "D5", "C7", "C6", "B6", "B5", "F0", "F1", "F4", "F5", "F6", "F7", "B0"],
+ "rows": ["B4", "D7", "D6", "D4", "B3"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"levels": 5,
diff --git a/keyboards/westfoxtrot/cyclops/config.h b/keyboards/westfoxtrot/cyclops/config.h
index 9e3dfc491167..d1de752f7938 100644
--- a/keyboards/westfoxtrot/cyclops/config.h
+++ b/keyboards/westfoxtrot/cyclops/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D1, D0, D7, B4, F0 }
-#define MATRIX_COL_PINS { D3, D2, D5, D6, B6, B1, B2, B3, C6, C7, F7, F6, F4, F5, F1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/westfoxtrot/cyclops/info.json b/keyboards/westfoxtrot/cyclops/info.json
index 7af7031374ae..419a53588bfe 100644
--- a/keyboards/westfoxtrot/cyclops/info.json
+++ b/keyboards/westfoxtrot/cyclops/info.json
@@ -8,6 +8,11 @@
"pid": "0x0A66",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D3", "D2", "D5", "D6", "B6", "B1", "B2", "B3", "C6", "C7", "F7", "F6", "F4", "F5", "F1"],
+ "rows": ["D1", "D0", "D7", "B4", "F0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/westfoxtrot/cypher/rev1/config.h b/keyboards/westfoxtrot/cypher/rev1/config.h
index a6e5ac891ffd..cd1f84bc1fce 100644
--- a/keyboards/westfoxtrot/cypher/rev1/config.h
+++ b/keyboards/westfoxtrot/cypher/rev1/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, F6, B6, B7, C6, C7 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D4, D5, D6, D7, E6, F0 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/westfoxtrot/cypher/rev1/info.json b/keyboards/westfoxtrot/cypher/rev1/info.json
index 508948686648..217d979c419e 100644
--- a/keyboards/westfoxtrot/cypher/rev1/info.json
+++ b/keyboards/westfoxtrot/cypher/rev1/info.json
@@ -6,6 +6,11 @@
"pid": "0xAA97",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7", "E6", "F0"],
+ "rows": ["B0", "B1", "B2", "B3", "B4", "F6", "B6", "B7", "C6", "C7"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B5",
"levels": 5,
diff --git a/keyboards/westfoxtrot/cypher/rev5/config.h b/keyboards/westfoxtrot/cypher/rev5/config.h
index 61604a74a981..050bb413f797 100644
--- a/keyboards/westfoxtrot/cypher/rev5/config.h
+++ b/keyboards/westfoxtrot/cypher/rev5/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B0, F1, F5, F6, F7, D1, F4, D4, C6, C7 }
-#define MATRIX_COL_PINS { D6, D7, B4, B5, B6, B7, B3, B2, B1, F0 }
-
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/westfoxtrot/cypher/rev5/info.json b/keyboards/westfoxtrot/cypher/rev5/info.json
index 17bc326890c7..3725b4e3c9d2 100644
--- a/keyboards/westfoxtrot/cypher/rev5/info.json
+++ b/keyboards/westfoxtrot/cypher/rev5/info.json
@@ -6,6 +6,11 @@
"pid": "0xAA98",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["D6", "D7", "B4", "B5", "B6", "B7", "B3", "B2", "B1", "F0"],
+ "rows": ["B0", "F1", "F5", "F6", "F7", "D1", "F4", "D4", "C6", "C7"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "D0",
"levels": 5,
diff --git a/keyboards/westfoxtrot/prophet/config.h b/keyboards/westfoxtrot/prophet/config.h
index 3206c0e56d4f..d7d992f50ec6 100644
--- a/keyboards/westfoxtrot/prophet/config.h
+++ b/keyboards/westfoxtrot/prophet/config.h
@@ -1,15 +1,5 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
-*/
-#define MATRIX_ROW_PINS { C13, B2, B1, A4, A3 }
-#define MATRIX_COL_PINS { A6, A7, B0, A9, A8, A14, A15, B3, B4, B5, B8, B7, B6, B9 }
-
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/westfoxtrot/prophet/info.json b/keyboards/westfoxtrot/prophet/info.json
index ee65ab26014d..94be2e52dbfc 100644
--- a/keyboards/westfoxtrot/prophet/info.json
+++ b/keyboards/westfoxtrot/prophet/info.json
@@ -8,6 +8,11 @@
"pid": "0xAA03",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A6", "A7", "B0", "A9", "A8", "A14", "A15", "B3", "B4", "B5", "B8", "B7", "B6", "B9"],
+ "rows": ["C13", "B2", "B1", "A4", "A3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/westm/westm68/config.h b/keyboards/westm/westm68/config.h
index 68ad7707870c..9a425a91a89e 100644
--- a/keyboards/westm/westm68/config.h
+++ b/keyboards/westm/westm68/config.h
@@ -20,10 +20,6 @@
/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
-#define MATRIX_ROW_PINS { A13, B9, F1, A10, A9 }
-#define MATRIX_COL_PINS { B14, B13, B12, B11, B10, B2, B1, B8, B7, B6, B5, B4, B3, A15, A14 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/westm/westm68/info.json b/keyboards/westm/westm68/info.json
index 8ff4f8d8ce98..46138869fcad 100644
--- a/keyboards/westm/westm68/info.json
+++ b/keyboards/westm/westm68/info.json
@@ -7,6 +7,11 @@
"vid": "0x574D",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B14", "B13", "B12", "B11", "B10", "B2", "B1", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"],
+ "rows": ["A13", "B9", "F1", "A10", "A9"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/westm/westm9/config.h b/keyboards/westm/westm9/config.h
index 51efda06a631..9a425a91a89e 100644
--- a/keyboards/westm/westm9/config.h
+++ b/keyboards/westm/westm9/config.h
@@ -20,10 +20,6 @@
/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
-#define MATRIX_ROW_PINS { A14, A15, B3 }
-#define MATRIX_COL_PINS { B8, B5, B4 }
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/westm/westm9/info.json b/keyboards/westm/westm9/info.json
index c9ec1e17d7fe..ed0b994805fd 100644
--- a/keyboards/westm/westm9/info.json
+++ b/keyboards/westm/westm9/info.json
@@ -7,6 +7,11 @@
"vid": "0x574D",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B8", "B5", "B4"],
+ "rows": ["A14", "A15", "B3"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/westm/westmergo/config.h b/keyboards/westm/westmergo/config.h
index fd10220d9f85..7b6f2e212086 100644
--- a/keyboards/westm/westmergo/config.h
+++ b/keyboards/westm/westmergo/config.h
@@ -16,10 +16,6 @@
#pragma once
-#define MATRIX_ROW_PINS { A13, B9, F1, A10, A9 }
-#define MATRIX_COL_PINS { B15, B14, B13, B12, B11, B10, B2, B1, B8, B7, B6, B5, B4, B3, A15, A14 }
-#define DIODE_DIRECTION COL2ROW
-
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/westm/westmergo/info.json b/keyboards/westm/westmergo/info.json
index a50da579e35a..edfc012c28d1 100644
--- a/keyboards/westm/westmergo/info.json
+++ b/keyboards/westm/westmergo/info.json
@@ -8,6 +8,11 @@
"pid": "0x0201",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B15", "B14", "B13", "B12", "B11", "B10", "B2", "B1", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"],
+ "rows": ["A13", "B9", "F1", "A10", "A9"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "STM32F072",
"bootloader": "stm32-dfu",
"layouts": {
diff --git a/keyboards/whale/sk/v3/config.h b/keyboards/whale/sk/v3/config.h
deleted file mode 100644
index c473b10dc885..000000000000
--- a/keyboards/whale/sk/v3/config.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
-Copyright 2020 Whale Mo
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B1, B2, B3, B4, B5, B6 }
-#define MATRIX_COL_PINS { D4, C6, D7, E6, F4, F5, F6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/whale/sk/v3/info.json b/keyboards/whale/sk/v3/info.json
index 0ab3b6c0a21c..78967cd6e905 100644
--- a/keyboards/whale/sk/v3/info.json
+++ b/keyboards/whale/sk/v3/info.json
@@ -8,6 +8,11 @@
"pid": "0x0495",
"device_version": "0.0.3"
},
+ "matrix_pins": {
+ "cols": ["D4", "C6", "D7", "E6", "F4", "F5", "F6"],
+ "rows": ["B1", "B2", "B3", "B4", "B5", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"debounce": 3,
diff --git a/keyboards/wilba_tech/rama_works_kara/config.h b/keyboards/wilba_tech/rama_works_kara/config.h
index 6f8d6f9b8be3..d34fd6468c06 100644
--- a/keyboards/wilba_tech/rama_works_kara/config.h
+++ b/keyboards/wilba_tech/rama_works_kara/config.h
@@ -15,18 +15,10 @@
*/
#pragma once
-
-// M60-A PCB default pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
// IS31FL3731 driver
#define DRIVER_COUNT 2
#define RGB_MATRIX_LED_COUNT 72
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
#define LOCKING_SUPPORT_ENABLE
// Locking resynchronize hack
diff --git a/keyboards/wilba_tech/rama_works_kara/info.json b/keyboards/wilba_tech/rama_works_kara/info.json
index 18bba59fe59b..3dd9ad22c265 100644
--- a/keyboards/wilba_tech/rama_works_kara/info.json
+++ b/keyboards/wilba_tech/rama_works_kara/info.json
@@ -8,6 +8,11 @@
"pid": "0x4B52",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["60_hhkb"],
diff --git a/keyboards/wilba_tech/rama_works_koyu/config.h b/keyboards/wilba_tech/rama_works_koyu/config.h
index c0b005d443bd..c3bb43ec6d43 100644
--- a/keyboards/wilba_tech/rama_works_koyu/config.h
+++ b/keyboards/wilba_tech/rama_works_koyu/config.h
@@ -15,18 +15,10 @@
*/
#pragma once
-
-// KOYU PCB pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
// IS31FL3731 driver
#define DRIVER_COUNT 2
#define RGB_MATRIX_LED_COUNT 72
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
#define LOCKING_SUPPORT_ENABLE
// Locking resynchronize hack
diff --git a/keyboards/wilba_tech/rama_works_koyu/info.json b/keyboards/wilba_tech/rama_works_koyu/info.json
index 190638c00165..55a180af636b 100644
--- a/keyboards/wilba_tech/rama_works_koyu/info.json
+++ b/keyboards/wilba_tech/rama_works_koyu/info.json
@@ -8,6 +8,11 @@
"pid": "0x4B59",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m10_b/config.h b/keyboards/wilba_tech/rama_works_m10_b/config.h
index be92b36639e2..00ecf5f18620 100644
--- a/keyboards/wilba_tech/rama_works_m10_b/config.h
+++ b/keyboards/wilba_tech/rama_works_m10_b/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { D7, B6, F0, D6, B5, F1, D4, B4, F4, F5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m10_b/info.json b/keyboards/wilba_tech/rama_works_m10_b/info.json
index 4b7c87be21ac..01337765867f 100644
--- a/keyboards/wilba_tech/rama_works_m10_b/info.json
+++ b/keyboards/wilba_tech/rama_works_m10_b/info.json
@@ -8,6 +8,11 @@
"pid": "0x00AB",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D7", "B6", "F0", "D6", "B5", "F1", "D4", "B4", "F4", "F5"],
+ "rows": ["E6"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "C6"
},
diff --git a/keyboards/wilba_tech/rama_works_m10_c/config.h b/keyboards/wilba_tech/rama_works_m10_c/config.h
index 9f68eb4287a4..1cc9655b1be8 100644
--- a/keyboards/wilba_tech/rama_works_m10_c/config.h
+++ b/keyboards/wilba_tech/rama_works_m10_c/config.h
@@ -15,23 +15,6 @@
*/
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { D7, B6, F0, D6, B5, F1, D4, B4, F4, F5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m10_c/info.json b/keyboards/wilba_tech/rama_works_m10_c/info.json
index b60dd538154b..6b6bd3d61be5 100644
--- a/keyboards/wilba_tech/rama_works_m10_c/info.json
+++ b/keyboards/wilba_tech/rama_works_m10_c/info.json
@@ -8,6 +8,11 @@
"pid": "0x00AC",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D7", "B6", "F0", "D6", "B5", "F1", "D4", "B4", "F4", "F5"],
+ "rows": ["E6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m50_a/config.h b/keyboards/wilba_tech/rama_works_m50_a/config.h
index 79a1614268dc..ab04ab070bf9 100644
--- a/keyboards/wilba_tech/rama_works_m50_a/config.h
+++ b/keyboards/wilba_tech/rama_works_m50_a/config.h
@@ -15,23 +15,6 @@
*/
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F5, F6 }
-#define MATRIX_COL_PINS { F4, B5, C7, C6, B6, B2, B3, B1, B4, D7, D6, D4, D3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m50_a/info.json b/keyboards/wilba_tech/rama_works_m50_a/info.json
index a53a960f0a05..e26b56dd2fda 100644
--- a/keyboards/wilba_tech/rama_works_m50_a/info.json
+++ b/keyboards/wilba_tech/rama_works_m50_a/info.json
@@ -8,6 +8,11 @@
"pid": "0x050A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "B5", "C7", "C6", "B6", "B2", "B3", "B1", "B4", "D7", "D6", "D4", "D3"],
+ "rows": ["F0", "F1", "F5", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m50_ax/config.h b/keyboards/wilba_tech/rama_works_m50_ax/config.h
index add6c1c77974..9b6b3c795583 100644
--- a/keyboards/wilba_tech/rama_works_m50_ax/config.h
+++ b/keyboards/wilba_tech/rama_works_m50_ax/config.h
@@ -15,23 +15,6 @@
*/
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F5, F6 }
-#define MATRIX_COL_PINS { F4, B5, C7, C6, B6, B2, B3, B1, B4, D7, D6, D4, D3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m50_ax/info.json b/keyboards/wilba_tech/rama_works_m50_ax/info.json
index 2fc265fec9a6..fc296c275491 100644
--- a/keyboards/wilba_tech/rama_works_m50_ax/info.json
+++ b/keyboards/wilba_tech/rama_works_m50_ax/info.json
@@ -8,6 +8,11 @@
"pid": "0x150A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "B5", "C7", "C6", "B6", "B2", "B3", "B1", "B4", "D7", "D6", "D4", "D3"],
+ "rows": ["F0", "F1", "F5", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m60_a/config.h b/keyboards/wilba_tech/rama_works_m60_a/config.h
index acc21edc2868..c80a01849675 100644
--- a/keyboards/wilba_tech/rama_works_m60_a/config.h
+++ b/keyboards/wilba_tech/rama_works_m60_a/config.h
@@ -15,18 +15,10 @@
*/
#pragma once
-
-// M60-A PCB default pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
// IS31FL3731 driver
#define DRIVER_COUNT 2
#define RGB_MATRIX_LED_COUNT 72
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
#define LOCKING_SUPPORT_ENABLE
// Locking resynchronize hack
diff --git a/keyboards/wilba_tech/rama_works_m60_a/info.json b/keyboards/wilba_tech/rama_works_m60_a/info.json
index d76b1789476d..8ba17a5df204 100644
--- a/keyboards/wilba_tech/rama_works_m60_a/info.json
+++ b/keyboards/wilba_tech/rama_works_m60_a/info.json
@@ -8,6 +8,11 @@
"pid": "0x060A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["60_hhkb"],
diff --git a/keyboards/wilba_tech/rama_works_m65_b/config.h b/keyboards/wilba_tech/rama_works_m65_b/config.h
index 5b745b109d50..6d3f0fb97fad 100644
--- a/keyboards/wilba_tech/rama_works_m65_b/config.h
+++ b/keyboards/wilba_tech/rama_works_m65_b/config.h
@@ -15,23 +15,6 @@
*/
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m65_b/info.json b/keyboards/wilba_tech/rama_works_m65_b/info.json
index 55f9f05536da..a8ca36bf16b8 100644
--- a/keyboards/wilba_tech/rama_works_m65_b/info.json
+++ b/keyboards/wilba_tech/rama_works_m65_b/info.json
@@ -8,6 +8,11 @@
"pid": "0x065B",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m65_bx/config.h b/keyboards/wilba_tech/rama_works_m65_bx/config.h
index eb2b08304aef..e367a7fc76bf 100644
--- a/keyboards/wilba_tech/rama_works_m65_bx/config.h
+++ b/keyboards/wilba_tech/rama_works_m65_bx/config.h
@@ -15,23 +15,6 @@
*/
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m65_bx/info.json b/keyboards/wilba_tech/rama_works_m65_bx/info.json
index ca5bf2b21e14..1e4af340dbdc 100644
--- a/keyboards/wilba_tech/rama_works_m65_bx/info.json
+++ b/keyboards/wilba_tech/rama_works_m65_bx/info.json
@@ -8,6 +8,11 @@
"pid": "0x165B",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m6_a/config.h b/keyboards/wilba_tech/rama_works_m6_a/config.h
index 9937b3f5beda..6a19f1e7e9fb 100644
--- a/keyboards/wilba_tech/rama_works_m6_a/config.h
+++ b/keyboards/wilba_tech/rama_works_m6_a/config.h
@@ -15,23 +15,6 @@
*/
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m6_a/info.json b/keyboards/wilba_tech/rama_works_m6_a/info.json
index 67912b6ce0cd..5158e7e06fff 100644
--- a/keyboards/wilba_tech/rama_works_m6_a/info.json
+++ b/keyboards/wilba_tech/rama_works_m6_a/info.json
@@ -8,6 +8,11 @@
"pid": "0x006A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "B5", "F4", "D7", "C6", "F6"],
+ "rows": ["E6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m6_b/config.h b/keyboards/wilba_tech/rama_works_m6_b/config.h
index 6b6b405cd0f4..a117bcc2a84e 100644
--- a/keyboards/wilba_tech/rama_works_m6_b/config.h
+++ b/keyboards/wilba_tech/rama_works_m6_b/config.h
@@ -15,23 +15,6 @@
*/
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m6_b/info.json b/keyboards/wilba_tech/rama_works_m6_b/info.json
index 96fc84b00276..3a3b32d1df1b 100644
--- a/keyboards/wilba_tech/rama_works_m6_b/info.json
+++ b/keyboards/wilba_tech/rama_works_m6_b/info.json
@@ -8,6 +8,11 @@
"pid": "0x006B",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D4", "B5", "F4", "D7", "C6", "F6"],
+ "rows": ["E6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/rama_works_u80_a/config.h b/keyboards/wilba_tech/rama_works_u80_a/config.h
index 8a94e15b4705..cb2d88bd4723 100644
--- a/keyboards/wilba_tech/rama_works_u80_a/config.h
+++ b/keyboards/wilba_tech/rama_works_u80_a/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_u80_a/info.json b/keyboards/wilba_tech/rama_works_u80_a/info.json
index 27a5fe7148f6..2ee00ae161f2 100644
--- a/keyboards/wilba_tech/rama_works_u80_a/info.json
+++ b/keyboards/wilba_tech/rama_works_u80_a/info.json
@@ -8,6 +8,11 @@
"pid": "0x080A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B7", "B0"],
+ "rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt60_a/config.h b/keyboards/wilba_tech/wt60_a/config.h
index 0179cfaa644c..488eeade83c5 100644
--- a/keyboards/wilba_tech/wt60_a/config.h
+++ b/keyboards/wilba_tech/wt60_a/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_a/info.json b/keyboards/wilba_tech/wt60_a/info.json
index 85b1e2e6a1cb..e429b635de54 100644
--- a/keyboards/wilba_tech/wt60_a/info.json
+++ b/keyboards/wilba_tech/wt60_a/info.json
@@ -8,6 +8,11 @@
"pid": "0x060A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+ "rows": ["F0", "E6", "F4", "F6", "F7"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt60_b/config.h b/keyboards/wilba_tech/wt60_b/config.h
index 887e11c81fc5..cf495a2e781c 100644
--- a/keyboards/wilba_tech/wt60_b/config.h
+++ b/keyboards/wilba_tech/wt60_b/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_b/info.json b/keyboards/wilba_tech/wt60_b/info.json
index 6e8d463abb7e..1a9338a5c81f 100644
--- a/keyboards/wilba_tech/wt60_b/info.json
+++ b/keyboards/wilba_tech/wt60_b/info.json
@@ -8,6 +8,11 @@
"pid": "0x60B0",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt60_bx/config.h b/keyboards/wilba_tech/wt60_bx/config.h
index 5bc298d70ebd..6f89b1495451 100644
--- a/keyboards/wilba_tech/wt60_bx/config.h
+++ b/keyboards/wilba_tech/wt60_bx/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_bx/info.json b/keyboards/wilba_tech/wt60_bx/info.json
index 8c3cf7de2a0e..9b63c7f8e77c 100644
--- a/keyboards/wilba_tech/wt60_bx/info.json
+++ b/keyboards/wilba_tech/wt60_bx/info.json
@@ -8,6 +8,11 @@
"pid": "0x60B1",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt60_c/config.h b/keyboards/wilba_tech/wt60_c/config.h
index 7b7fdaf02046..776aebcf20b6 100644
--- a/keyboards/wilba_tech/wt60_c/config.h
+++ b/keyboards/wilba_tech/wt60_c/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_c/info.json b/keyboards/wilba_tech/wt60_c/info.json
index b39a2786a47f..b23b639c7e7d 100644
--- a/keyboards/wilba_tech/wt60_c/info.json
+++ b/keyboards/wilba_tech/wt60_c/info.json
@@ -8,6 +8,11 @@
"pid": "0x60C0",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt60_g/config.h b/keyboards/wilba_tech/wt60_g/config.h
index 32645266942d..9541b1df1261 100644
--- a/keyboards/wilba_tech/wt60_g/config.h
+++ b/keyboards/wilba_tech/wt60_g/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } // D4, B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_g/info.json b/keyboards/wilba_tech/wt60_g/info.json
index 5c22b6dc213f..113729e250ce 100644
--- a/keyboards/wilba_tech/wt60_g/info.json
+++ b/keyboards/wilba_tech/wt60_g/info.json
@@ -8,6 +8,11 @@
"pid": "0x0021",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt60_g2/config.h b/keyboards/wilba_tech/wt60_g2/config.h
index c841f6365a5c..b7d24e1cd3c4 100644
--- a/keyboards/wilba_tech/wt60_g2/config.h
+++ b/keyboards/wilba_tech/wt60_g2/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } // D4, B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_g2/info.json b/keyboards/wilba_tech/wt60_g2/info.json
index 33b0fd0d5025..b1d34eb65db7 100644
--- a/keyboards/wilba_tech/wt60_g2/info.json
+++ b/keyboards/wilba_tech/wt60_g2/info.json
@@ -8,6 +8,11 @@
"pid": "0x002F",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt60_h1/config.h b/keyboards/wilba_tech/wt60_h1/config.h
index 32645266942d..9541b1df1261 100644
--- a/keyboards/wilba_tech/wt60_h1/config.h
+++ b/keyboards/wilba_tech/wt60_h1/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } // D4, B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_h1/info.json b/keyboards/wilba_tech/wt60_h1/info.json
index 928ea8ba8ab6..4ef210f05f22 100644
--- a/keyboards/wilba_tech/wt60_h1/info.json
+++ b/keyboards/wilba_tech/wt60_h1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0024",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["60_tsangan_hhkb"],
diff --git a/keyboards/wilba_tech/wt60_h2/config.h b/keyboards/wilba_tech/wt60_h2/config.h
index 32645266942d..9541b1df1261 100644
--- a/keyboards/wilba_tech/wt60_h2/config.h
+++ b/keyboards/wilba_tech/wt60_h2/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } // D4, B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_h2/info.json b/keyboards/wilba_tech/wt60_h2/info.json
index e9c59d1b8c93..046a8526bc8f 100644
--- a/keyboards/wilba_tech/wt60_h2/info.json
+++ b/keyboards/wilba_tech/wt60_h2/info.json
@@ -8,6 +8,11 @@
"pid": "0x002B",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt60_h3/config.h b/keyboards/wilba_tech/wt60_h3/config.h
index 32645266942d..9541b1df1261 100644
--- a/keyboards/wilba_tech/wt60_h3/config.h
+++ b/keyboards/wilba_tech/wt60_h3/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } // D4, B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_h3/info.json b/keyboards/wilba_tech/wt60_h3/info.json
index df002063a37c..f4cb4bedbc95 100644
--- a/keyboards/wilba_tech/wt60_h3/info.json
+++ b/keyboards/wilba_tech/wt60_h3/info.json
@@ -8,6 +8,11 @@
"pid": "0x002C",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
diff --git a/keyboards/wilba_tech/wt60_xt/config.h b/keyboards/wilba_tech/wt60_xt/config.h
index 888197a2168a..ea2f490317b6 100644
--- a/keyboards/wilba_tech/wt60_xt/config.h
+++ b/keyboards/wilba_tech/wt60_xt/config.h
@@ -20,22 +20,6 @@
#define AUDIO_PIN C6
#define AUDIO_CLICKY
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { B7, B0, F5, D5, B1, B2, B3, D3, D2, C7, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_xt/info.json b/keyboards/wilba_tech/wt60_xt/info.json
index d31d8380b14d..edbd17a5c360 100644
--- a/keyboards/wilba_tech/wt60_xt/info.json
+++ b/keyboards/wilba_tech/wt60_xt/info.json
@@ -8,6 +8,11 @@
"pid": "0x001C",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B7", "B0", "F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F0", "E6", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt65_a/config.h b/keyboards/wilba_tech/wt65_a/config.h
index 906887f3fa87..aa75002b4fcb 100644
--- a/keyboards/wilba_tech/wt65_a/config.h
+++ b/keyboards/wilba_tech/wt65_a/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_a/info.json b/keyboards/wilba_tech/wt65_a/info.json
index 1c73d405563f..1b56bd785c3f 100644
--- a/keyboards/wilba_tech/wt65_a/info.json
+++ b/keyboards/wilba_tech/wt65_a/info.json
@@ -8,6 +8,11 @@
"pid": "0x065A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F0", "E6", "F4", "F6", "F7"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt65_b/config.h b/keyboards/wilba_tech/wt65_b/config.h
index 2cec4c23d719..60cdbe4cc6ab 100644
--- a/keyboards/wilba_tech/wt65_b/config.h
+++ b/keyboards/wilba_tech/wt65_b/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_b/info.json b/keyboards/wilba_tech/wt65_b/info.json
index 17dc827d5582..5ac0d81f28d6 100644
--- a/keyboards/wilba_tech/wt65_b/info.json
+++ b/keyboards/wilba_tech/wt65_b/info.json
@@ -8,6 +8,11 @@
"pid": "0x065B",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F0", "E6", "F4", "F6", "F7"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt65_d/config.h b/keyboards/wilba_tech/wt65_d/config.h
index d383760f1969..f37e4b2db650 100644
--- a/keyboards/wilba_tech/wt65_d/config.h
+++ b/keyboards/wilba_tech/wt65_d/config.h
@@ -3,11 +3,6 @@
#pragma once
-// Keyboard Matrix Assignments
-#define MATRIX_ROW_PINS { E6, F0, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, D3, D2, B7, B0, B3, C7, C6, B6, B5, B4, D7, D6, D4 }
-#define DIODE_DIRECTION COL2ROW
-
// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/wilba_tech/wt65_d/info.json b/keyboards/wilba_tech/wt65_d/info.json
index 68dc46d54870..dec1e89e95ec 100644
--- a/keyboards/wilba_tech/wt65_d/info.json
+++ b/keyboards/wilba_tech/wt65_d/info.json
@@ -8,6 +8,11 @@
"pid": "0x0031",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "D3", "D2", "B7", "B0", "B3", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["E6", "F0", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "F1"
},
diff --git a/keyboards/wilba_tech/wt65_f/config.h b/keyboards/wilba_tech/wt65_f/config.h
index bf47e02d25a2..b7d24e1cd3c4 100644
--- a/keyboards/wilba_tech/wt65_f/config.h
+++ b/keyboards/wilba_tech/wt65_f/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } // B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_f/info.json b/keyboards/wilba_tech/wt65_f/info.json
index f5916bea1bfe..9cf7004132f2 100644
--- a/keyboards/wilba_tech/wt65_f/info.json
+++ b/keyboards/wilba_tech/wt65_f/info.json
@@ -8,6 +8,11 @@
"pid": "0x002D",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt65_fx/config.h b/keyboards/wilba_tech/wt65_fx/config.h
index bf47e02d25a2..b7d24e1cd3c4 100644
--- a/keyboards/wilba_tech/wt65_fx/config.h
+++ b/keyboards/wilba_tech/wt65_fx/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } // B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_fx/info.json b/keyboards/wilba_tech/wt65_fx/info.json
index afbc80b8c1bf..d9195621e238 100644
--- a/keyboards/wilba_tech/wt65_fx/info.json
+++ b/keyboards/wilba_tech/wt65_fx/info.json
@@ -8,6 +8,11 @@
"pid": "0x002E",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt65_g/config.h b/keyboards/wilba_tech/wt65_g/config.h
index 807b7fa8eed7..9541b1df1261 100644
--- a/keyboards/wilba_tech/wt65_g/config.h
+++ b/keyboards/wilba_tech/wt65_g/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } // B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_g/info.json b/keyboards/wilba_tech/wt65_g/info.json
index bdfea960a433..1f794e5e37fa 100644
--- a/keyboards/wilba_tech/wt65_g/info.json
+++ b/keyboards/wilba_tech/wt65_g/info.json
@@ -8,6 +8,11 @@
"pid": "0x0022",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt65_g2/config.h b/keyboards/wilba_tech/wt65_g2/config.h
index 807b7fa8eed7..9541b1df1261 100644
--- a/keyboards/wilba_tech/wt65_g2/config.h
+++ b/keyboards/wilba_tech/wt65_g2/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } // B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_g2/info.json b/keyboards/wilba_tech/wt65_g2/info.json
index 5d8769625ac9..b3d8d3bdbb50 100644
--- a/keyboards/wilba_tech/wt65_g2/info.json
+++ b/keyboards/wilba_tech/wt65_g2/info.json
@@ -8,6 +8,11 @@
"pid": "0x002A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt65_h1/config.h b/keyboards/wilba_tech/wt65_h1/config.h
index 807b7fa8eed7..9541b1df1261 100644
--- a/keyboards/wilba_tech/wt65_h1/config.h
+++ b/keyboards/wilba_tech/wt65_h1/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } // B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_h1/info.json b/keyboards/wilba_tech/wt65_h1/info.json
index 2ccb1d909980..65e8c39016ed 100644
--- a/keyboards/wilba_tech/wt65_h1/info.json
+++ b/keyboards/wilba_tech/wt65_h1/info.json
@@ -8,6 +8,11 @@
"pid": "0x0025",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["65_ansi_blocker_tsangan"],
diff --git a/keyboards/wilba_tech/wt65_xt/config.h b/keyboards/wilba_tech/wt65_xt/config.h
index 525df76d1b99..9541b1df1261 100644
--- a/keyboards/wilba_tech/wt65_xt/config.h
+++ b/keyboards/wilba_tech/wt65_xt/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { B7, B0, F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_xt/info.json b/keyboards/wilba_tech/wt65_xt/info.json
index 575d1c3add00..98c21c8230cc 100644
--- a/keyboards/wilba_tech/wt65_xt/info.json
+++ b/keyboards/wilba_tech/wt65_xt/info.json
@@ -8,6 +8,11 @@
"pid": "0x001D",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B7", "B0", "F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt65_xtx/config.h b/keyboards/wilba_tech/wt65_xtx/config.h
index c799ec8bc4ef..9b6b3c795583 100644
--- a/keyboards/wilba_tech/wt65_xtx/config.h
+++ b/keyboards/wilba_tech/wt65_xtx/config.h
@@ -15,23 +15,6 @@
*/
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { B7, B0, F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_xtx/info.json b/keyboards/wilba_tech/wt65_xtx/info.json
index 196044185ba5..e9394e8a022e 100644
--- a/keyboards/wilba_tech/wt65_xtx/info.json
+++ b/keyboards/wilba_tech/wt65_xtx/info.json
@@ -8,6 +8,11 @@
"pid": "0x001E",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B7", "B0", "F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt69_a/config.h b/keyboards/wilba_tech/wt69_a/config.h
index e893d73def70..bc06d6ce9c02 100644
--- a/keyboards/wilba_tech/wt69_a/config.h
+++ b/keyboards/wilba_tech/wt69_a/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { B7, B0, F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt69_a/info.json b/keyboards/wilba_tech/wt69_a/info.json
index 67faf978d4ec..7d643b66ce3b 100644
--- a/keyboards/wilba_tech/wt69_a/info.json
+++ b/keyboards/wilba_tech/wt69_a/info.json
@@ -8,6 +8,11 @@
"pid": "0x069A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B7", "B0", "F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F0", "E6", "F4", "F6", "F7"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt70_jb/config.h b/keyboards/wilba_tech/wt70_jb/config.h
index 0a853d659c01..afc09fb5fe59 100644
--- a/keyboards/wilba_tech/wt70_jb/config.h
+++ b/keyboards/wilba_tech/wt70_jb/config.h
@@ -15,23 +15,6 @@
*/
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6, F0, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, D3, D2, D1, D0, B7, C7, C6, B6, B5, B4, D7, D6, D4, B0, B3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt70_jb/info.json b/keyboards/wilba_tech/wt70_jb/info.json
index a004bb43a0c2..a913e0b225d4 100644
--- a/keyboards/wilba_tech/wt70_jb/info.json
+++ b/keyboards/wilba_tech/wt70_jb/info.json
@@ -8,6 +8,11 @@
"pid": "0x001F",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "D3", "D2", "D1", "D0", "B7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B0", "B3"],
+ "rows": ["E6", "F0", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt75_a/config.h b/keyboards/wilba_tech/wt75_a/config.h
index d678e7f0e923..4638b0fba965 100644
--- a/keyboards/wilba_tech/wt75_a/config.h
+++ b/keyboards/wilba_tech/wt75_a/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt75_a/info.json b/keyboards/wilba_tech/wt75_a/info.json
index 24342333354b..a531ab8a19ad 100644
--- a/keyboards/wilba_tech/wt75_a/info.json
+++ b/keyboards/wilba_tech/wt75_a/info.json
@@ -8,6 +8,11 @@
"pid": "0x075A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt75_b/config.h b/keyboards/wilba_tech/wt75_b/config.h
index e36da68c4ee0..f519fe66034d 100644
--- a/keyboards/wilba_tech/wt75_b/config.h
+++ b/keyboards/wilba_tech/wt75_b/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B7, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, B2, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt75_b/info.json b/keyboards/wilba_tech/wt75_b/info.json
index b2bd5a02ae6c..af090acd3a50 100644
--- a/keyboards/wilba_tech/wt75_b/info.json
+++ b/keyboards/wilba_tech/wt75_b/info.json
@@ -8,6 +8,11 @@
"pid": "0x075B",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B7", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "B2", "D4"],
+ "rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt75_c/config.h b/keyboards/wilba_tech/wt75_c/config.h
index 0bd449089c93..7d07822eb6ac 100644
--- a/keyboards/wilba_tech/wt75_c/config.h
+++ b/keyboards/wilba_tech/wt75_c/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, B7, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt75_c/info.json b/keyboards/wilba_tech/wt75_c/info.json
index 85a99879083b..86ccc5df0ec9 100644
--- a/keyboards/wilba_tech/wt75_c/info.json
+++ b/keyboards/wilba_tech/wt75_c/info.json
@@ -8,6 +8,11 @@
"pid": "0x075C",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "B7", "D4"],
+ "rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt80_a/config.h b/keyboards/wilba_tech/wt80_a/config.h
index 8112d1f888ca..59cb397a00ff 100644
--- a/keyboards/wilba_tech/wt80_a/config.h
+++ b/keyboards/wilba_tech/wt80_a/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt80_a/info.json b/keyboards/wilba_tech/wt80_a/info.json
index 337207404acb..0a814235d990 100644
--- a/keyboards/wilba_tech/wt80_a/info.json
+++ b/keyboards/wilba_tech/wt80_a/info.json
@@ -8,6 +8,11 @@
"pid": "0x080A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B7", "B0"],
+ "rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt80_bc/config.h b/keyboards/wilba_tech/wt80_bc/config.h
index aa5ba2d5731e..9541b1df1261 100644
--- a/keyboards/wilba_tech/wt80_bc/config.h
+++ b/keyboards/wilba_tech/wt80_bc/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt80_bc/info.json b/keyboards/wilba_tech/wt80_bc/info.json
index e2858d238a16..a85325525b07 100644
--- a/keyboards/wilba_tech/wt80_bc/info.json
+++ b/keyboards/wilba_tech/wt80_bc/info.json
@@ -8,6 +8,11 @@
"pid": "0x80B0",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B7", "B0"],
+ "rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt80_g/config.h b/keyboards/wilba_tech/wt80_g/config.h
index aa5ba2d5731e..9541b1df1261 100644
--- a/keyboards/wilba_tech/wt80_g/config.h
+++ b/keyboards/wilba_tech/wt80_g/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt80_g/info.json b/keyboards/wilba_tech/wt80_g/info.json
index 1c7ff192d15c..8aec5901ea05 100644
--- a/keyboards/wilba_tech/wt80_g/info.json
+++ b/keyboards/wilba_tech/wt80_g/info.json
@@ -8,6 +8,11 @@
"pid": "0x0023",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B7", "B0"],
+ "rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/wt8_a/config.h b/keyboards/wilba_tech/wt8_a/config.h
index 3ef5baf58858..1377a18714c2 100644
--- a/keyboards/wilba_tech/wt8_a/config.h
+++ b/keyboards/wilba_tech/wt8_a/config.h
@@ -16,23 +16,6 @@
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { F4, F1, B2, B6, F6, F7, D5, B4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt8_a/info.json b/keyboards/wilba_tech/wt8_a/info.json
index 53cffb13aee7..b462b05eeb3e 100644
--- a/keyboards/wilba_tech/wt8_a/info.json
+++ b/keyboards/wilba_tech/wt8_a/info.json
@@ -8,6 +8,11 @@
"pid": "0x008A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F4", "F1", "B2", "B6", "F6", "F7", "D5", "B4"],
+ "rows": ["E6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wilba_tech/zeal60/config.h b/keyboards/wilba_tech/zeal60/config.h
index 5a3ad34bf7ff..e57bafe20dd1 100644
--- a/keyboards/wilba_tech/zeal60/config.h
+++ b/keyboards/wilba_tech/zeal60/config.h
@@ -15,18 +15,10 @@
*/
#pragma once
-
-// Zeal60 PCB default pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
// IS31FL3731 driver
#define DRIVER_COUNT 2
#define RGB_MATRIX_LED_COUNT 72
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
#define LOCKING_SUPPORT_ENABLE
// Locking resynchronize hack
diff --git a/keyboards/wilba_tech/zeal60/info.json b/keyboards/wilba_tech/zeal60/info.json
index 5ef0875419b4..764b04032046 100644
--- a/keyboards/wilba_tech/zeal60/info.json
+++ b/keyboards/wilba_tech/zeal60/info.json
@@ -8,6 +8,11 @@
"pid": "0x0060",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["60_ansi", "60_iso", "60_hhkb", "60_ansi_split_bs_rshift"],
diff --git a/keyboards/wilba_tech/zeal65/config.h b/keyboards/wilba_tech/zeal65/config.h
index 1ab6b627513f..4a73ed3b2763 100644
--- a/keyboards/wilba_tech/zeal65/config.h
+++ b/keyboards/wilba_tech/zeal65/config.h
@@ -15,18 +15,10 @@
*/
#pragma once
-
-// Zeal60 PCB default pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
// IS31FL3731 driver
#define DRIVER_COUNT 2
#define RGB_MATRIX_LED_COUNT 72
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
#define LOCKING_SUPPORT_ENABLE
// Locking resynchronize hack
diff --git a/keyboards/wilba_tech/zeal65/info.json b/keyboards/wilba_tech/zeal65/info.json
index 935dc188749d..0918277e8150 100644
--- a/keyboards/wilba_tech/zeal65/info.json
+++ b/keyboards/wilba_tech/zeal65/info.json
@@ -8,6 +8,11 @@
"pid": "0x0065",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["F0", "F1", "F4", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/winkeyless/b87/config.h b/keyboards/winkeyless/b87/config.h
index ce27a1c563df..b585802fb85b 100644
--- a/keyboards/winkeyless/b87/config.h
+++ b/keyboards/winkeyless/b87/config.h
@@ -16,11 +16,6 @@
#pragma once
-
-/*Define Matrix Pins */
-#define MATRIX_ROW_PINS {B5, B4, B3, B2, B1, B0, B6, B7}
-#define MATRIX_COL_PINS {A0, A1, A2, A3, A4, A5, C5, C4, C3, C2, D7, C6, C7, A7, A6}
-
#define RGBLED_NUM 20 // Number of LEDs
// RGB effects
#define RGBLIGHT_EFFECT_BREATHING
@@ -33,6 +28,3 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/winkeyless/b87/info.json b/keyboards/winkeyless/b87/info.json
index 542cc74d270f..506ddf78ec8a 100644
--- a/keyboards/winkeyless/b87/info.json
+++ b/keyboards/winkeyless/b87/info.json
@@ -8,6 +8,11 @@
"pid": "0x0B87",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["A0", "A1", "A2", "A3", "A4", "A5", "C5", "C4", "C3", "C2", "D7", "C6", "C7", "A7", "A6"],
+ "rows": ["B5", "B4", "B3", "B2", "B1", "B0", "B6", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "D4"
},
diff --git a/keyboards/winkeyless/bface/config.h b/keyboards/winkeyless/bface/config.h
index cbb0be707da1..b7529e431110 100644
--- a/keyboards/winkeyless/bface/config.h
+++ b/keyboards/winkeyless/bface/config.h
@@ -18,12 +18,6 @@ along with this program. If not, see .
#pragma once
-// 0 1 2 3 4 5 6 7 8 9 A B C D E
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
-#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7}
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGBLED_NUM 16
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/winkeyless/bface/info.json b/keyboards/winkeyless/bface/info.json
index f7a8c61032c1..fc3b3c45d30f 100644
--- a/keyboards/winkeyless/bface/info.json
+++ b/keyboards/winkeyless/bface/info.json
@@ -8,6 +8,11 @@
"pid": "0x4246",
"device_version": "2.0.0"
},
+ "matrix_pins": {
+ "cols": ["A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "C7", "C6", "C5", "C4", "C3", "C2", "D7"],
+ "rows": ["B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "D4"
},
diff --git a/keyboards/winkeyless/bmini/config.h b/keyboards/winkeyless/bmini/config.h
index 033807a3f5f7..ddc21dae3085 100644
--- a/keyboards/winkeyless/bmini/config.h
+++ b/keyboards/winkeyless/bmini/config.h
@@ -20,10 +20,6 @@ along with this program. If not, see .
#define RGBLED_NUM 16
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
-#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
-#define DIODE_DIRECTION COL2ROW
-
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/winkeyless/bmini/info.json b/keyboards/winkeyless/bmini/info.json
index 58edbac99849..add6deafad1d 100644
--- a/keyboards/winkeyless/bmini/info.json
+++ b/keyboards/winkeyless/bmini/info.json
@@ -8,6 +8,11 @@
"pid": "0x424D",
"device_version": "2.0.0"
},
+ "matrix_pins": {
+ "cols": ["A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "C7", "C6", "C5", "C4", "C3", "C2", "D7"],
+ "rows": ["B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "D4"
},
diff --git a/keyboards/winkeyless/bminiex/config.h b/keyboards/winkeyless/bminiex/config.h
index 351de6f47545..116c09d6ac78 100644
--- a/keyboards/winkeyless/bminiex/config.h
+++ b/keyboards/winkeyless/bminiex/config.h
@@ -20,10 +20,6 @@ along with this program. If not, see .
#define RGBLED_NUM 20
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
-#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
-#define DIODE_DIRECTION COL2ROW
-
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/winkeyless/bminiex/info.json b/keyboards/winkeyless/bminiex/info.json
index afd766f480ab..c60a38fe2f3f 100644
--- a/keyboards/winkeyless/bminiex/info.json
+++ b/keyboards/winkeyless/bminiex/info.json
@@ -8,6 +8,11 @@
"pid": "0x4258",
"device_version": "2.0.0"
},
+ "matrix_pins": {
+ "cols": ["A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "C7", "C6", "C5", "C4", "C3", "C2", "D7"],
+ "rows": ["B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "D4",
"levels": 5
diff --git a/keyboards/winry/winry25tc/config.h b/keyboards/winry/winry25tc/config.h
index f67f725ef633..90e70999b680 100644
--- a/keyboards/winry/winry25tc/config.h
+++ b/keyboards/winry/winry25tc/config.h
@@ -16,12 +16,6 @@
#pragma once
-
-#define MATRIX_ROW_PINS { E6, F0, D6, D2, B6 }
-#define MATRIX_COL_PINS { F5, C7, B7, B2, B4 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D5
#define RGBLED_NUM 40
#define RGBLIGHT_HUE_STEP 8
diff --git a/keyboards/winry/winry25tc/info.json b/keyboards/winry/winry25tc/info.json
index 4cbb746408b6..0391d278b9f5 100644
--- a/keyboards/winry/winry25tc/info.json
+++ b/keyboards/winry/winry25tc/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F5", "C7", "B7", "B2", "B4"],
+ "rows": ["E6", "F0", "D6", "D2", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wolf/kuku65/config.h b/keyboards/wolf/kuku65/config.h
deleted file mode 100644
index a103afe45103..000000000000
--- a/keyboards/wolf/kuku65/config.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
-Copyright 2020
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-
-// Checked with Eagle Schematic
-#define MATRIX_ROW_PINS { B3, B2, B1, B0, B7 }
-#define MATRIX_COL_PINS { D0, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/wolf/kuku65/info.json b/keyboards/wolf/kuku65/info.json
index 39fec251a1d7..36022287d24e 100644
--- a/keyboards/wolf/kuku65/info.json
+++ b/keyboards/wolf/kuku65/info.json
@@ -8,6 +8,11 @@
"pid": "0x0052",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D0", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1"],
+ "rows": ["B3", "B2", "B1", "B0", "B7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wolf/ryujin/config.h b/keyboards/wolf/ryujin/config.h
deleted file mode 100644
index dd9ec9803aeb..000000000000
--- a/keyboards/wolf/ryujin/config.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
-Copyright 2020
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-
-// Checked with Eagle Schematic
-#define MATRIX_ROW_PINS { D5, D3, D2, D1, D0 }
-#define MATRIX_COL_PINS { E6, F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/wolf/ryujin/info.json b/keyboards/wolf/ryujin/info.json
index 5afce87aefc9..4a7c08060651 100644
--- a/keyboards/wolf/ryujin/info.json
+++ b/keyboards/wolf/ryujin/info.json
@@ -8,6 +8,11 @@
"pid": "0x0200",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+ "rows": ["D5", "D3", "D2", "D1", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wolf/sabre/config.h b/keyboards/wolf/sabre/config.h
deleted file mode 100644
index c0150fce0bce..000000000000
--- a/keyboards/wolf/sabre/config.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
-Copyright 2020
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-
-// Checked with Eagle Schematic
-#define MATRIX_ROW_PINS { D0, D1, F1, F0, B5, B6, C7, C6, F6, F7, F4, F5 }
-#define MATRIX_COL_PINS { D2, D3, D5, D4, D6, D7, B4, B2, B1 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/wolf/sabre/info.json b/keyboards/wolf/sabre/info.json
index 40ee60a6d0fc..526422d945ea 100644
--- a/keyboards/wolf/sabre/info.json
+++ b/keyboards/wolf/sabre/info.json
@@ -8,6 +8,11 @@
"pid": "0x0055",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D2", "D3", "D5", "D4", "D6", "D7", "B4", "B2", "B1"],
+ "rows": ["D0", "D1", "F1", "F0", "B5", "B6", "C7", "C6", "F6", "F7", "F4", "F5"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7"
},
diff --git a/keyboards/wolf/ts60/config.h b/keyboards/wolf/ts60/config.h
index 7664e747c7de..cfc1ef79bc7e 100644
--- a/keyboards/wolf/ts60/config.h
+++ b/keyboards/wolf/ts60/config.h
@@ -17,25 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-
-// Checked with Eagle Schematic
-#define MATRIX_ROW_PINS { D2, D3, D6, D4, F6, F7, F5, F0, F4, F1 }
-#define MATRIX_COL_PINS { D1, D5, C7, C6, B6, B5, B4, D7}
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Define RGB Underglow */
#define RGB_DI_PIN D0
#define RGBLED_NUM 16
diff --git a/keyboards/wolf/ts60/info.json b/keyboards/wolf/ts60/info.json
index 8b40cd6ff22d..a8b8e9126800 100644
--- a/keyboards/wolf/ts60/info.json
+++ b/keyboards/wolf/ts60/info.json
@@ -8,6 +8,11 @@
"pid": "0x0050",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "D5", "C7", "C6", "B6", "B5", "B4", "D7"],
+ "rows": ["D2", "D3", "D6", "D4", "F6", "F7", "F5", "F0", "F4", "F1"]
+ },
+ "diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"levels": 6
diff --git a/keyboards/wolfmarkclub/wm1/config.h b/keyboards/wolfmarkclub/wm1/config.h
index f9802c89f393..93b0d14a3a87 100644
--- a/keyboards/wolfmarkclub/wm1/config.h
+++ b/keyboards/wolfmarkclub/wm1/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-// 0 1 2 3 4 5 6 7 8 9 A B C D E
-#define MATRIX_ROW_PINS { C4, A7, A6, A5, A4 }
-#define MATRIX_COL_PINS { B10, B11, B12, B13, B14, B15, C6, C10, C11, C12, D2, B5, B6, B7, B8 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN A3
#ifdef RGB_DI_PIN
#define RGBLED_NUM 18
diff --git a/keyboards/wolfmarkclub/wm1/info.json b/keyboards/wolfmarkclub/wm1/info.json
index 3eef787a74b5..ac1827daf6ab 100644
--- a/keyboards/wolfmarkclub/wm1/info.json
+++ b/keyboards/wolfmarkclub/wm1/info.json
@@ -8,6 +8,11 @@
"pid": "0x2B29",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B10", "B11", "B12", "B13", "B14", "B15", "C6", "C10", "C11", "C12", "D2", "B5", "B6", "B7", "B8"],
+ "rows": ["C4", "A7", "A6", "A5", "A4"]
+ },
+ "diode_direction": "COL2ROW",
"layouts": {
"LAYOUT": {
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":8.75, "y":0}, {"x":9.75, "y":0}, {"x":10.75, "y":0}, {"x":11.75, "y":0}, {"x":12.75, "y":0}, {"x":13.75, "y":0}, {"x":14.75, "y":0}, {"x":15.75, "y":0}, {"x":17, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1}, {"x":12.25, "y":1}, {"x":13.25, "y":1}, {"x":14.25, "y":1}, {"x":15.25, "y":1, "w":1.5}, {"x":17, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":14.5, "y":2, "w":2.25}, {"x":17, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3, "w":1.75}, {"x":16.25, "y":3.25}, {"x":0, "y":4, "w":1.5}, {"x":3, "y":4, "w":1.5}, {"x":4.5, "y":4, "w":2}, {"x":6.5, "y":4}, {"x":8, "y":4, "w":2.75}, {"x":10.75, "y":4, "w":1.5}, {"x":13.25, "y":4, "w":1.5}, {"x":15.25, "y":4.25}, {"x":16.25, "y":4.25}, {"x":17.25, "y":4.25}]
diff --git a/keyboards/woodkeys/bigseries/1key/config.h b/keyboards/woodkeys/bigseries/1key/config.h
index 32263155ff6c..643a094f4412 100755
--- a/keyboards/woodkeys/bigseries/1key/config.h
+++ b/keyboards/woodkeys/bigseries/1key/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B0 }
-#define MATRIX_COL_PINS { B4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/* key combination for command */
#define IS_COMMAND() ( \
false \
diff --git a/keyboards/woodkeys/bigseries/1key/info.json b/keyboards/woodkeys/bigseries/1key/info.json
index f2f93b63eab7..1d0a787d9ac9 100644
--- a/keyboards/woodkeys/bigseries/1key/info.json
+++ b/keyboards/woodkeys/bigseries/1key/info.json
@@ -8,6 +8,11 @@
"pid": "0x6071",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["B4"],
+ "rows": ["B0"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u2",
"bootloader": "atmel-dfu",
"debounce": 50,
diff --git a/keyboards/woodkeys/bigseries/2key/config.h b/keyboards/woodkeys/bigseries/2key/config.h
index 6b4006576530..62734fc947bb 100755
--- a/keyboards/woodkeys/bigseries/2key/config.h
+++ b/keyboards/woodkeys/bigseries/2key/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B0 }
-#define MATRIX_COL_PINS { B4, B3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/* key combination for command */
#define IS_COMMAND() ( \
false \
diff --git a/keyboards/woodkeys/bigseries/2key/info.json b/keyboards/woodkeys/bigseries/2key/info.json
index 5137f4f1d198..c3a2b62eb81e 100644
--- a/keyboards/woodkeys/bigseries/2key/info.json
+++ b/keyboards/woodkeys/bigseries/2key/info.json
@@ -8,6 +8,11 @@
"pid": "0x6071",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["B4", "B3"],
+ "rows": ["B0"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u2",
"bootloader": "atmel-dfu",
"debounce": 50,
diff --git a/keyboards/woodkeys/bigseries/3key/config.h b/keyboards/woodkeys/bigseries/3key/config.h
index 9c81df0835b3..592aae3c888c 100755
--- a/keyboards/woodkeys/bigseries/3key/config.h
+++ b/keyboards/woodkeys/bigseries/3key/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B0 }
-#define MATRIX_COL_PINS { B4, B3, B5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/* key combination for command */
#define IS_COMMAND() ( \
false \
diff --git a/keyboards/woodkeys/bigseries/3key/info.json b/keyboards/woodkeys/bigseries/3key/info.json
index af1c85f925be..43b99312db90 100644
--- a/keyboards/woodkeys/bigseries/3key/info.json
+++ b/keyboards/woodkeys/bigseries/3key/info.json
@@ -8,6 +8,11 @@
"pid": "0x6073",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["B4", "B3", "B5"],
+ "rows": ["B0"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"debounce": 50,
diff --git a/keyboards/woodkeys/bigseries/4key/config.h b/keyboards/woodkeys/bigseries/4key/config.h
index 9b1f699ce1fd..53e1242c8898 100755
--- a/keyboards/woodkeys/bigseries/4key/config.h
+++ b/keyboards/woodkeys/bigseries/4key/config.h
@@ -17,14 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B0, B5 }
-#define MATRIX_COL_PINS { B4, B3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
/* key combination for command */
#define IS_COMMAND() ( \
false \
diff --git a/keyboards/woodkeys/bigseries/4key/info.json b/keyboards/woodkeys/bigseries/4key/info.json
index b6e02aa987d1..8fb9a9071ac6 100644
--- a/keyboards/woodkeys/bigseries/4key/info.json
+++ b/keyboards/woodkeys/bigseries/4key/info.json
@@ -8,6 +8,11 @@
"pid": "0x6074",
"device_version": "0.0.2"
},
+ "matrix_pins": {
+ "cols": ["B4", "B3"],
+ "rows": ["B0", "B5"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u2",
"bootloader": "atmel-dfu",
"debounce": 50,
diff --git a/keyboards/woodkeys/scarletbandana/config.h b/keyboards/woodkeys/scarletbandana/config.h
index fac7647ab846..c640c6254fbf 100644
--- a/keyboards/woodkeys/scarletbandana/config.h
+++ b/keyboards/woodkeys/scarletbandana/config.h
@@ -17,10 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
#ifdef RGBLIGHT_ENABLE
#define RGB_DI_PIN D3
#define RGBLIGHT_EFFECT_BREATHING
@@ -36,9 +32,6 @@ along with this program. If not, see .
#define RGBLED_NUM 8 // Number of LEDs
#endif
-#define MATRIX_ROW_PINS { D4, D6, D7, B4, B5 }
-#define MATRIX_COL_PINS { B2, B3, B7, B1, F5, F4, F6, F7, B0, F0, F1, D0, D1, D2, D5, B6, C7 }
-
#ifdef AUDIO_ENABLE
#define AUDIO_PIN C6
#define STARTUP_SONG SONG(PREONIC_SOUND)
diff --git a/keyboards/woodkeys/scarletbandana/info.json b/keyboards/woodkeys/scarletbandana/info.json
index 180cd4609801..7550db40c872 100644
--- a/keyboards/woodkeys/scarletbandana/info.json
+++ b/keyboards/woodkeys/scarletbandana/info.json
@@ -8,6 +8,11 @@
"pid": "0x6969",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B2", "B3", "B7", "B1", "F5", "F4", "F6", "F7", "B0", "F0", "F1", "D0", "D1", "D2", "D5", "B6", "C7"],
+ "rows": ["D4", "D6", "D7", "B4", "B5"]
+ },
+ "diode_direction": "ROW2COL",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/work_louder/loop/config.h b/keyboards/work_louder/loop/config.h
index 1e17946cef67..020b95da170e 100644
--- a/keyboards/work_louder/loop/config.h
+++ b/keyboards/work_louder/loop/config.h
@@ -17,25 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS \
- { F5 }
-#define MATRIX_COL_PINS { B3, B2, B1, D6, D7, B4, B5, B6, C6, C7, F7, F6 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-
#define USB_MAX_POWER_CONSUMPTION 100
#define RGBLIGHT_DI_PIN E6
diff --git a/keyboards/work_louder/loop/info.json b/keyboards/work_louder/loop/info.json
index df4a5c1be045..00e70ab0db6f 100644
--- a/keyboards/work_louder/loop/info.json
+++ b/keyboards/work_louder/loop/info.json
@@ -7,6 +7,11 @@
"vid": "0x574C",
"pid": "0x1DF9"
},
+ "matrix_pins": {
+ "cols": ["B3", "B2", "B1", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6"],
+ "rows": ["F5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D0", "pin_b": "D1"},
diff --git a/keyboards/work_louder/nano/config.h b/keyboards/work_louder/nano/config.h
index 9148cf1abf84..add9608eb4d0 100644
--- a/keyboards/work_louder/nano/config.h
+++ b/keyboards/work_louder/nano/config.h
@@ -17,25 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS \
- { F7 }
-#define MATRIX_COL_PINS \
- { B5, B6, C6 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define USB_MAX_POWER_CONSUMPTION 100
#define RGBLIGHT_DI_PIN C7
diff --git a/keyboards/work_louder/nano/info.json b/keyboards/work_louder/nano/info.json
index 3eb050b92adb..798127b4c0f1 100644
--- a/keyboards/work_louder/nano/info.json
+++ b/keyboards/work_louder/nano/info.json
@@ -8,6 +8,11 @@
"pid": "0xE6F0",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B5", "B6", "C6"],
+ "rows": ["F7"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D7", "pin_b": "B4"}
diff --git a/keyboards/work_louder/work_board/config.h b/keyboards/work_louder/work_board/config.h
index d9da63eb5083..de4cf74badb3 100644
--- a/keyboards/work_louder/work_board/config.h
+++ b/keyboards/work_louder/work_board/config.h
@@ -17,25 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS \
- { F0, F1, F4, F5 }
-#define MATRIX_COL_PINS \
- { D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, E6 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define USB_MAX_POWER_CONSUMPTION 100
#define RGBLIGHT_DI_PIN D2
diff --git a/keyboards/work_louder/work_board/info.json b/keyboards/work_louder/work_board/info.json
index 5e934e90e0d0..6826f123a9c6 100644
--- a/keyboards/work_louder/work_board/info.json
+++ b/keyboards/work_louder/work_board/info.json
@@ -7,6 +7,11 @@
"vid": "0x574C",
"pid": "0xDCD1"
},
+ "matrix_pins": {
+ "cols": ["D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6", "E6"],
+ "rows": ["F0", "F1", "F4", "F5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B0", "pin_b": "B1"}
diff --git a/keyboards/wren/config.h b/keyboards/wren/config.h
index 72e110cc6baf..bd4af23167d6 100644
--- a/keyboards/wren/config.h
+++ b/keyboards/wren/config.h
@@ -17,23 +17,6 @@ along with this program. If not, see .
#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D3, D2, C6, D4, B5 }
-#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4, D7, F0 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
#define USE_I2C
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/wren/info.json b/keyboards/wren/info.json
index 184ddea75b75..06fa7ddf10bb 100644
--- a/keyboards/wren/info.json
+++ b/keyboards/wren/info.json
@@ -7,6 +7,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4", "D7", "F0"],
+ "rows": ["D3", "D2", "C6", "D4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "E6", "pin_b": "B4"}
diff --git a/keyboards/wsk/alpha9/config.h b/keyboards/wsk/alpha9/config.h
index 19943cdb98cb..9796f37b97fb 100644
--- a/keyboards/wsk/alpha9/config.h
+++ b/keyboards/wsk/alpha9/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D4, B4, B5 }
-#define MATRIX_COL_PINS { D7, E6, C6, B6, B2, B3, B1, F7, F6, F5, D1, D0, D2 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/wsk/alpha9/info.json b/keyboards/wsk/alpha9/info.json
index 65d1bec3f77e..bb5415b0224c 100644
--- a/keyboards/wsk/alpha9/info.json
+++ b/keyboards/wsk/alpha9/info.json
@@ -8,6 +8,11 @@
"pid": "0x692A",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D7", "E6", "C6", "B6", "B2", "B3", "B1", "F7", "F6", "F5", "D1", "D0", "D2"],
+ "rows": ["D4", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "D3",
"on_state": 0
diff --git a/keyboards/wsk/g4m3ralpha/config.h b/keyboards/wsk/g4m3ralpha/config.h
index fb101db58ff3..98d3d12d3d04 100644
--- a/keyboards/wsk/g4m3ralpha/config.h
+++ b/keyboards/wsk/g4m3ralpha/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D4, B4, B5, D1 }
-#define MATRIX_COL_PINS { D7, E6, C6, B6, B2, B3, B1, F7, F6, F5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/wsk/g4m3ralpha/info.json b/keyboards/wsk/g4m3ralpha/info.json
index a55225c0bc0e..37672ede0ae3 100644
--- a/keyboards/wsk/g4m3ralpha/info.json
+++ b/keyboards/wsk/g4m3ralpha/info.json
@@ -8,6 +8,11 @@
"pid": "0x56D9",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D7", "E6", "C6", "B6", "B2", "B3", "B1", "F7", "F6", "F5"],
+ "rows": ["D4", "B4", "B5", "D1"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/wsk/gothic50/config.h b/keyboards/wsk/gothic50/config.h
index da5729ed4f77..b893b35e691c 100644
--- a/keyboards/wsk/gothic50/config.h
+++ b/keyboards/wsk/gothic50/config.h
@@ -1,15 +1,5 @@
#pragma once
-
-/* key matrix pins */
-
-#define MATRIX_ROW_PINS { B5, B4, D7, D6 }
-#define MATRIX_COL_PINS { E6, F0, F1, C7, C6, B6, D4, D5, D3, D2, D1, D0, B7, B0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-
#define RGB_DI_PIN F7
#ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/wsk/gothic50/info.json b/keyboards/wsk/gothic50/info.json
index bce25f39344c..f773ebf1936f 100644
--- a/keyboards/wsk/gothic50/info.json
+++ b/keyboards/wsk/gothic50/info.json
@@ -8,6 +8,11 @@
"pid": "0x04EF",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["E6", "F0", "F1", "C7", "C6", "B6", "D4", "D5", "D3", "D2", "D1", "D0", "B7", "B0"],
+ "rows": ["B5", "B4", "D7", "D6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wsk/gothic70/config.h b/keyboards/wsk/gothic70/config.h
index 8cfb2dcab94b..de29eadb1431 100644
--- a/keyboards/wsk/gothic70/config.h
+++ b/keyboards/wsk/gothic70/config.h
@@ -1,14 +1,5 @@
#pragma once
-
-/* key matrix pins */
-
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B7, B5, B4, D7, D6, B3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN F4
#ifdef RGB_DI_PIN
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/wsk/gothic70/info.json b/keyboards/wsk/gothic70/info.json
index f7baad64c122..0fd4a6018d9e 100644
--- a/keyboards/wsk/gothic70/info.json
+++ b/keyboards/wsk/gothic70/info.json
@@ -8,6 +8,11 @@
"pid": "0x63CC",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["F0", "F1", "E6", "C7", "C6", "B6", "D4", "B1", "B0", "B7", "B5", "B4", "D7", "D6", "B3"],
+ "rows": ["D0", "D1", "D2", "D3", "D5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layouts": {
diff --git a/keyboards/wsk/houndstooth/config.h b/keyboards/wsk/houndstooth/config.h
index b9cc1722c311..08f6b873c5bc 100644
--- a/keyboards/wsk/houndstooth/config.h
+++ b/keyboards/wsk/houndstooth/config.h
@@ -1,13 +1,5 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { C6, F7, D7, B1, B4, B2, B5, B6 }
-#define MATRIX_COL_PINS { D1, F4, D0, F5, D4, F6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/wsk/houndstooth/info.json b/keyboards/wsk/houndstooth/info.json
index 490088543cbf..e383e46b3c33 100644
--- a/keyboards/wsk/houndstooth/info.json
+++ b/keyboards/wsk/houndstooth/info.json
@@ -8,6 +8,11 @@
"pid": "0xFA9C",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "F4", "D0", "F5", "D4", "F6"],
+ "rows": ["C6", "F7", "D7", "B1", "B4", "B2", "B5", "B6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/wsk/jerkin/config.h b/keyboards/wsk/jerkin/config.h
index dcecb58d1535..68d4a8fef749 100644
--- a/keyboards/wsk/jerkin/config.h
+++ b/keyboards/wsk/jerkin/config.h
@@ -1,13 +1,5 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B3, B4, B5 }
-#define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, B1, F7, F6, F5, F4, E6, D7 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/wsk/jerkin/info.json b/keyboards/wsk/jerkin/info.json
index bc273e6c5efb..19099a4f5619 100644
--- a/keyboards/wsk/jerkin/info.json
+++ b/keyboards/wsk/jerkin/info.json
@@ -8,6 +8,11 @@
"pid": "0x79AE",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D3", "D2", "D1", "D0", "D4", "C6", "B1", "F7", "F6", "F5", "F4", "E6", "D7"],
+ "rows": ["B3", "B4", "B5"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/wsk/kodachi50/config.h b/keyboards/wsk/kodachi50/config.h
index 8f965e4b0969..eecc8ba082fe 100644
--- a/keyboards/wsk/kodachi50/config.h
+++ b/keyboards/wsk/kodachi50/config.h
@@ -1,13 +1,5 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D2, B5, B6, B2, B3, B1, F7, F6 }
-#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6, B4 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/wsk/kodachi50/info.json b/keyboards/wsk/kodachi50/info.json
index 713c1f064f0b..29f17cc22545 100644
--- a/keyboards/wsk/kodachi50/info.json
+++ b/keyboards/wsk/kodachi50/info.json
@@ -8,6 +8,11 @@
"pid": "0x72D4",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "D0", "D4", "C6", "D7", "E6", "B4"],
+ "rows": ["D2", "B5", "B6", "B2", "B3", "B1", "F7", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/wsk/pain27/config.h b/keyboards/wsk/pain27/config.h
index 593192dfb506..5ddf06145f50 100644
--- a/keyboards/wsk/pain27/config.h
+++ b/keyboards/wsk/pain27/config.h
@@ -1,13 +1,5 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F4, F5, D0 }
-#define MATRIX_COL_PINS { D2, B3, F6, B1, B2, B6, D4, C6, D7, E6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/wsk/pain27/info.json b/keyboards/wsk/pain27/info.json
index ee3d58487387..021d5ac5739c 100644
--- a/keyboards/wsk/pain27/info.json
+++ b/keyboards/wsk/pain27/info.json
@@ -8,6 +8,11 @@
"pid": "0x9E8C",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D2", "B3", "F6", "B1", "B2", "B6", "D4", "C6", "D7", "E6"],
+ "rows": ["F4", "F5", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/wsk/sl40/config.h b/keyboards/wsk/sl40/config.h
index 2dca1b6d6dd3..ed32129b5973 100644
--- a/keyboards/wsk/sl40/config.h
+++ b/keyboards/wsk/sl40/config.h
@@ -16,14 +16,6 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F4, F5, D2, D0 }
-#define MATRIX_COL_PINS { D3, D1, F6, F7, B6, B2, B3, B1, D4, C6, D7, E6, B4, B5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/wsk/sl40/info.json b/keyboards/wsk/sl40/info.json
index f9f700e42c67..713987382f05 100644
--- a/keyboards/wsk/sl40/info.json
+++ b/keyboards/wsk/sl40/info.json
@@ -8,6 +8,11 @@
"pid": "0xC456",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D3", "D1", "F6", "F7", "B6", "B2", "B3", "B1", "D4", "C6", "D7", "E6", "B4", "B5"],
+ "rows": ["F4", "F5", "D2", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/wsk/tkl30/config.h b/keyboards/wsk/tkl30/config.h
index 8b12e346b635..4cb0e034be7b 100644
--- a/keyboards/wsk/tkl30/config.h
+++ b/keyboards/wsk/tkl30/config.h
@@ -1,13 +1,5 @@
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D2, B5, F4 }
-#define MATRIX_COL_PINS { D3, D1, D0, D4, F7, C6, B1, D7, B3, E6, B2, B4, B6, F6, E5 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/wsk/tkl30/info.json b/keyboards/wsk/tkl30/info.json
index b210528ba0a2..f3f57e50b5f3 100644
--- a/keyboards/wsk/tkl30/info.json
+++ b/keyboards/wsk/tkl30/info.json
@@ -8,6 +8,11 @@
"pid": "0x0B7F",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D3", "D1", "D0", "D4", "F7", "C6", "B1", "D7", "B3", "E6", "B2", "B4", "B6", "F6", "E5"],
+ "rows": ["D2", "B5", "F4"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
diff --git a/keyboards/wuque/ikki68/config.h b/keyboards/wuque/ikki68/config.h
index 45f78436988c..53b28706403e 100644
--- a/keyboards/wuque/ikki68/config.h
+++ b/keyboards/wuque/ikki68/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, E6 }
-#define MATRIX_COL_PINS { D1, D0, D2, D3, D5, D4, D6, D7, B4, B5, F0, F1, B6, F4, F5, F6,F7 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/wuque/ikki68/info.json b/keyboards/wuque/ikki68/info.json
index 4cdf46a99a69..fd1cb7f9ba0d 100644
--- a/keyboards/wuque/ikki68/info.json
+++ b/keyboards/wuque/ikki68/info.json
@@ -8,6 +8,11 @@
"pid": "0x0003",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D1", "D0", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "F0", "F1", "B6", "F4", "F5", "F6", "F7"],
+ "rows": ["B0", "B1", "B2", "B3", "E6"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["68_ansi"],
diff --git a/keyboards/wuque/ikki68_aurora/config.h b/keyboards/wuque/ikki68_aurora/config.h
index 85a6ecf974ba..496e22c07a51 100644
--- a/keyboards/wuque/ikki68_aurora/config.h
+++ b/keyboards/wuque/ikki68_aurora/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 }
-#define MATRIX_COL_PINS { D5, D3, D2, D1, D0, F0, F1, E6, B5, B4, D7, D6, D4, F4, F5, F6 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/wuque/ikki68_aurora/info.json b/keyboards/wuque/ikki68_aurora/info.json
index bf47f85a75d3..d9157dc5d6a3 100644
--- a/keyboards/wuque/ikki68_aurora/info.json
+++ b/keyboards/wuque/ikki68_aurora/info.json
@@ -8,6 +8,11 @@
"pid": "0x0011",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D5", "D3", "D2", "D1", "D0", "F0", "F1", "E6", "B5", "B4", "D7", "D6", "D4", "F4", "F5", "F6"],
+ "rows": ["B7", "B3", "B2", "B1", "B0"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "F7",
"on_state": 0
diff --git a/keyboards/wuque/mammoth20x/config.h b/keyboards/wuque/mammoth20x/config.h
index 8d9a74f5aad6..c35fac65d61d 100644
--- a/keyboards/wuque/mammoth20x/config.h
+++ b/keyboards/wuque/mammoth20x/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_ROW_PINS { D5, F0, F1, F4, F5, F6 }
-#define MATRIX_COL_PINS { B0, B1, E6, F7 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/wuque/mammoth20x/info.json b/keyboards/wuque/mammoth20x/info.json
index b251951becbd..e348f8af5a71 100644
--- a/keyboards/wuque/mammoth20x/info.json
+++ b/keyboards/wuque/mammoth20x/info.json
@@ -8,6 +8,11 @@
"pid": "0x0005",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B0", "B1", "E6", "F7"],
+ "rows": ["D5", "F0", "F1", "F4", "F5", "F6"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D3", "pin_b": "D2", "resolution": 2}
diff --git a/keyboards/wuque/mammoth75x/config.h b/keyboards/wuque/mammoth75x/config.h
index 55702e33527b..6b0d17be5cd0 100644
--- a/keyboards/wuque/mammoth75x/config.h
+++ b/keyboards/wuque/mammoth75x/config.h
@@ -17,12 +17,6 @@ along with this program. If not, see .
#pragma once
-
-#define MATRIX_ROW_PINS { B0, C7, D2, F7, D1, D0 }
-#define MATRIX_COL_PINS { D3, D5, D4, D6, D7, B4, B5, E6, F0, F1, F4, F5, F6, C6, B7, B3 }
-
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/wuque/mammoth75x/info.json b/keyboards/wuque/mammoth75x/info.json
index b668948f46c0..bacdeef0e4ac 100644
--- a/keyboards/wuque/mammoth75x/info.json
+++ b/keyboards/wuque/mammoth75x/info.json
@@ -8,6 +8,11 @@
"pid": "0x0004",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D3", "D5", "D4", "D6", "D7", "B4", "B5", "E6", "F0", "F1", "F4", "F5", "F6", "C6", "B7", "B3"],
+ "rows": ["B0", "C7", "D2", "F7", "D1", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B2", "pin_b": "B1", "resolution": 2}
diff --git a/keyboards/wuque/promise87/ansi/config.h b/keyboards/wuque/promise87/ansi/config.h
index e609117661ea..814dbd2d02fb 100644
--- a/keyboards/wuque/promise87/ansi/config.h
+++ b/keyboards/wuque/promise87/ansi/config.h
@@ -16,12 +16,6 @@
#pragma once
-
-#define MATRIX_ROW_PINS { B3, B7, B2, F0, D3, D0 }
-#define MATRIX_COL_PINS { D6, D7, D1, D5, F7, D4, F5, F4, F1, C7, C6, B6, B5, B4, E6, B1, B0 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D2
#ifdef RGB_DI_PIN
#define RGBLED_NUM 1
diff --git a/keyboards/wuque/promise87/ansi/info.json b/keyboards/wuque/promise87/ansi/info.json
index 0a0fefabd04e..d6cfb88bb295 100644
--- a/keyboards/wuque/promise87/ansi/info.json
+++ b/keyboards/wuque/promise87/ansi/info.json
@@ -8,6 +8,11 @@
"pid": "0x0005",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D6", "D7", "D1", "D5", "F7", "D4", "F5", "F4", "F1", "C7", "C6", "B6", "B5", "B4", "E6", "B1", "B0"],
+ "rows": ["B3", "B7", "B2", "F0", "D3", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "F6",
"on_state": 0
diff --git a/keyboards/wuque/promise87/wkl/config.h b/keyboards/wuque/promise87/wkl/config.h
index e609117661ea..814dbd2d02fb 100644
--- a/keyboards/wuque/promise87/wkl/config.h
+++ b/keyboards/wuque/promise87/wkl/config.h
@@ -16,12 +16,6 @@
#pragma once
-
-#define MATRIX_ROW_PINS { B3, B7, B2, F0, D3, D0 }
-#define MATRIX_COL_PINS { D6, D7, D1, D5, F7, D4, F5, F4, F1, C7, C6, B6, B5, B4, E6, B1, B0 }
-
-#define DIODE_DIRECTION COL2ROW
-
#define RGB_DI_PIN D2
#ifdef RGB_DI_PIN
#define RGBLED_NUM 1
diff --git a/keyboards/wuque/promise87/wkl/info.json b/keyboards/wuque/promise87/wkl/info.json
index eca78d19b5d2..1b8876686b66 100644
--- a/keyboards/wuque/promise87/wkl/info.json
+++ b/keyboards/wuque/promise87/wkl/info.json
@@ -8,6 +8,11 @@
"pid": "0x0006",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["D6", "D7", "D1", "D5", "F7", "D4", "F5", "F4", "F1", "C7", "C6", "B6", "B5", "B4", "E6", "B1", "B0"],
+ "rows": ["B3", "B7", "B2", "F0", "D3", "D0"]
+ },
+ "diode_direction": "COL2ROW",
"indicators": {
"caps_lock": "F6",
"on_state": 0
diff --git a/keyboards/wuque/serneity65/config.h b/keyboards/wuque/serneity65/config.h
index 036181772b11..134605fcab5c 100644
--- a/keyboards/wuque/serneity65/config.h
+++ b/keyboards/wuque/serneity65/config.h
@@ -16,12 +16,6 @@
#pragma once
-
-#define MATRIX_ROW_PINS { B0, F0, B1, D2, D3 }
-#define MATRIX_COL_PINS { B6, B5, D5, D4, D6, B4, D7, F1, F4, F5, F6, F7, C7, E6, B7 }
-
-#define DIODE_DIRECTION COL2ROW
-
// Note: array is { col, row )
#define ENCODERS_CW_KEY { { 3, 4 } }
#define ENCODERS_CCW_KEY { { 5, 4 } }
diff --git a/keyboards/wuque/serneity65/info.json b/keyboards/wuque/serneity65/info.json
index 744b112f70a8..4d295b0f7552 100644
--- a/keyboards/wuque/serneity65/info.json
+++ b/keyboards/wuque/serneity65/info.json
@@ -8,6 +8,11 @@
"pid": "0x0003",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["B6", "B5", "D5", "D4", "D6", "B4", "D7", "F1", "F4", "F5", "F6", "F7", "C7", "E6", "B7"],
+ "rows": ["B0", "F0", "B1", "D2", "D3"]
+ },
+ "diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "B2", "pin_b": "B3"}
diff --git a/keyboards/wuque/tata80/wk/config.h b/keyboards/wuque/tata80/wk/config.h
index c4890ec9b1ec..bbde3a615787 100644
--- a/keyboards/wuque/tata80/wk/config.h
+++ b/keyboards/wuque/tata80/wk/config.h
@@ -15,14 +15,6 @@
*/
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0, B7, B3, B2, B1, B0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wuque/tata80/wk/info.json b/keyboards/wuque/tata80/wk/info.json
index f1b5acf12d04..23146206c4ac 100644
--- a/keyboards/wuque/tata80/wk/info.json
+++ b/keyboards/wuque/tata80/wk/info.json
@@ -8,6 +8,11 @@
"pid": "0x0168",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0", "B7", "B3", "B2", "B1", "B0"],
+ "rows": ["F0", "F1", "F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"indicators": {
diff --git a/keyboards/wuque/tata80/wkl/config.h b/keyboards/wuque/tata80/wkl/config.h
index c4890ec9b1ec..bbde3a615787 100644
--- a/keyboards/wuque/tata80/wkl/config.h
+++ b/keyboards/wuque/tata80/wkl/config.h
@@ -15,14 +15,6 @@
*/
#pragma once
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0, B7, B3, B2, B1, B0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
diff --git a/keyboards/wuque/tata80/wkl/info.json b/keyboards/wuque/tata80/wkl/info.json
index c23c8dd856f5..47089bf7a15d 100644
--- a/keyboards/wuque/tata80/wkl/info.json
+++ b/keyboards/wuque/tata80/wkl/info.json
@@ -8,6 +8,11 @@
"pid": "0x0169",
"device_version": "0.0.1"
},
+ "matrix_pins": {
+ "cols": ["C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0", "B7", "B3", "B2", "B1", "B0"],
+ "rows": ["F0", "F1", "F4", "F5", "F6", "F7"]
+ },
+ "diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"indicators": {