Adding YMDK "Bface" keyboard

keyboards/ymdk/bface/README.md

@@ -0,0 +1,55 @@
+# The YMDK "Bface" PCB
+
+![ymdk_bface](https://i.imgur.com/qhFxN0g.jpg)
+
+A 60% keyboard that runs ps2avrgb natively and fits the popular GH60 form factor. Another "bfake" or clone of the original B.face PCB by [Winkeyless](https://winkeyless.kr/product/b-face-x2-pcb/). This PCB has slightly different switch matrix than the origninal B.face, and is also different than the bfake. It commonly comes as the PCB in 60% keyboard kits sold by YMDK on Aliexpress.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: White Bface Mini USB PCB with no RGB.  
+Hardware Availability: [Shenzhen YMD Tech Co. (YMDK) on Aliexpress](https://www.aliexpress.com/item/32799437588.html)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ymdk/bface:default
+
+Flashing:
+
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
+
+This board has a pair of jumper holes on the left edge of the PCB marked "Jb", near TAB and CAPS LOCK. If you short the contacts with tweezers or wire the board will enter into the bootloader and you can flash it.
+
+Windows: 
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete. 
+
+macOS:
+1. Install homebrew by typing the following:   
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install `crosspack-avr`.  
+    ```
+    brew cask install crosspack-avr
+    ```
+3. Install the following packages:
+    ```
+    brew install python
+    pip3 install pyusb
+    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+    ```
+
+4. Place your keyboard into reset by shorting the jumper on the left edge of the PCB.. 
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
+
+Another method for Mac or Linux:
+After installing `bootloadHID`, you can use the `./util/atmega32a_program.py` program included in QMK. You will need to have `python` and the `pyusb` library installed.
+
+Then you can run this to compile the firmware and flash the board without using the jumper:
+```
+make ymdk/bface:default:program
+```
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ymdk/bface/bface.c

@@ -0,0 +1,41 @@
+/* 
+ * Copyright 2019 Ethan Durrant (emdarcher)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "quantum.h"
+
+
+void keyboard_pre_init_kb(void){
+    //init the CAPS LOCK LED pin as an output
+    setPinOutput(D1);
+    //init the Backlight Pin as an output
+    setPinOutput(D4);
+    //call any user initialization code
+    keyboard_pre_init_user();
+}
+
+void led_set_kb(uint8_t usb_led){
+    //control the caps lock LED
+    if(IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)){
+        //set led pin to high
+        writePinHigh(D1);
+    } else {
+        //set to low
+        writePinLow(D1);
+    }
+    //call any user LED functions
+    led_set_user(usb_led);
+}
+

keyboards/ymdk/bface/bface.h

@@ -0,0 +1,69 @@
+/*
+Copyright 2019 Ethan Durrant (emdarcher)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all(\
+  K04, K14, K24, K34, K44, K54, K64, K74, K84, K94, KA4, KB4, KC4, KD4, KE4, \
+  K03, K13, K23, K33, K43, K53, K63, K73, K83, K93, KA3, KB3,  KC3,  KD3, \
+  K02, K12, K22, K32, K42, K52, K62, K72, K82, K92, KA2, KB2,  KC2,    KD2, \
+  K01, K11,   K21, K31, K41, K51, K61, K71, K81, K91, KA1, KB1,  KC1, KD1, KE1, \
+  K00,    K10,     K20,  K30,         K70,          K80,   K90, KA0, KB0, KC0, KD0  \
+){ \
+  { K00,   K10,   K20,   K30,   KC_NO, KC_NO, KC_NO,K70,    K80,    K90,    KA0,   KB0,   KC0,   KD0,   KC_NO }, \
+  { K01,   K11,   K21,   K31,   K41,   K51,   K61,  K71,    K81,    K91,    KA1,   KB1,   KC1,   KD1,   KE1 }, \
+  { K02,   K12,   K22,   K32,   K42,   K52,   K62,  K72,    K82,    K92,    KA2,   KB2,   KC2,   KD2,   KC_NO }, \
+  { K03,   K13,   K23,   K33,   K43,   K53,   K63,  K73,    K83,    K93,    KA3,   KB3,   KC3,   KD3,   KC_NO }, \
+  { K04,   K14,   K24,   K34,   K44,   K54,   K64,  K74,    K84,    K94,    KA4,   KB4,   KC4,   KD4,   KE4   }, \
+}
+//   0      1      2      3      4      5       6      7      8     9       A      B      C      D     E
+//   A0     A1     A2     A3     A4     A5     A6      A7     C7    C6      C5     C4     C3     C2    D7
+
+#define LAYOUT_60_ansi(\
+  K04, K14, K24, K34, K44, K54, K64, K74, K84, K94, KA4, KB4, KC4, KE4, \
+  K03, K13, K23, K33, K43, K53, K63, K73, K83, K93, KA3, KB3, KC3,    KD3, \
+  K02, K12, K22, K32, K42, K52, K62, K72, K82, K92, KA2, KB2,     KD2, \
+  K01,    K21, K31, K41, K51, K61, K71, K81, K91, KA1, KB1,  KD1,  \
+  K00,    K10,     K20,           K70,                K90, KA0, KC0, KD0  \
+){ \
+  { K00,   K10,   K20,   KC_NO, KC_NO, KC_NO, KC_NO, K70, KC_NO,    K90,    KA0,   KC_NO, KC0,   KD0,   KC_NO }, \
+  { K01,   KC_NO, K21,   K31,   K41,   K51,   K61,  K71,    K81,    K91,    KA1,   KB1,   KC_NO, KD1,   KC_NO }, \
+  { K02,   K12,   K22,   K32,   K42,   K52,   K62,  K72,    K82,    K92,    KA2,   KB2,   KC_NO, KD2,   KC_NO }, \
+  { K03,   K13,   K23,   K33,   K43,   K53,   K63,  K73,    K83,    K93,    KA3,   KB3,   KC3,   KD3,   KC_NO }, \
+  { K04,   K14,   K24,   K34,   K44,   K54,   K64,  K74,    K84,    K94,    KA4,   KB4,   KC4,   KC_NO, KE4   }, \
+}
+//   0      1      2      3      4      5       6      7      8     9       A      B      C      D     E
+//   A0     A1     A2     A3     A4     A5     A6      A7     C7    C6      C5     C4     C3     C2    D7
+
+#define LAYOUT_60_ansi_split_rshift(\
+  K04, K14, K24, K34, K44, K54, K64, K74, K84, K94, KA4, KB4, KC4, KE4, \
+  K03, K13, K23, K33, K43, K53, K63, K73, K83, K93, KA3, KB3,  KC3,  KD3, \
+  K02, K12, K22, K32, K42, K52, K62, K72, K82, K92, KA2, KB2,      KD2, \
+  K01,    K21, K31, K41, K51, K61, K71, K81, K91, KA1, KB1,  KD1,  KE1, \
+  K00,    K10,     K20,           K70,                K90, KA0, KC0, KD0  \
+){ \
+  { K00,   K10,   K20,   KC_NO, KC_NO, KC_NO, KC_NO, K70, KC_NO,    K90,    KA0,   KC_NO, KC0,   KD0,   KC_NO }, \
+  { K01,   KC_NO, K21,   K31,   K41,   K51,   K61,  K71,    K81,    K91,    KA1,   KB1,   KC_NO, KD1,   KE1 }, \
+  { K02,   K12,   K22,   K32,   K42,   K52,   K62,  K72,    K82,    K92,    KA2,   KB2,   KC_NO, KD2,   KC_NO }, \
+  { K03,   K13,   K23,   K33,   K43,   K53,   K63,  K73,    K83,    K93,    KA3,   KB3,   KC3,   KD3,   KC_NO }, \
+  { K04,   K14,   K24,   K34,   K44,   K54,   K64,  K74,    K84,    K94,    KA4,   KB4,   KC4,   KC_NO, KE4   }, \
+}
+//   0      1      2      3      4      5       6      7      8     9       A      B      C      D     E
+//   A0     A1     A2     A3     A4     A5     A6      A7     C7    C6      C5     C4     C3     C2    D7
+

keyboards/ymdk/bface/config.h

@@ -0,0 +1,41 @@
+/*
+Copyright 2019 Ethan Durrant (emdarcher)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define VENDOR_ID       0x20A0
+#define PRODUCT_ID      0x422D
+// You can edit those at usbconfig.h about line 250. These values will
+// unforunatly be ignored so far
+#define MANUFACTURER    YMDK
+#define PRODUCT         bface
+
+/* matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+//                        0   1   2   3   4   5   6   7   8   9   A   B   C   D   E
+#define MATRIX_ROW_PINS { B7, B6, B5, B4, B3}
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7}
+#define UNUSED_PINS
+
+#define NO_UART 1
+
+#define BACKLIGHT_PIN       D4
+#define BACKLIGHT_LEVELS    6
+
+

keyboards/ymdk/bface/info.json

@@ -0,0 +1,20 @@
+{
+  "keyboard_name": "YMDK Bface",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 15,
+  "height": 5,
+  "layouts": {
+      "LAYOUT_all": {
+          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0},{"x":13, "y":0}, {"label":"Backspace", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2},{"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"x":0, "y":3},{"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"x":12, "y":3},{"x":13, "y":3}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.75}, {"x":1.75, "y":4, "w":1.25}, {"x":3, "y":4, "w":1.25}, {"x":4.25, "y":4, "w":1.25},{"x":5.5, "y":4, "w":3}, {"x":8.5, "y":4, "w":1.25}, {"x":9.75, "y":4, "w":1.25}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}]
+      },
+
+      "LAYOUT_60_ansi": {
+          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      },
+
+      "LAYOUT_60_ansi_split_rshift": {
+          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      }
+  }
+}

keyboards/ymdk/bface/keymaps/default/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+#define GRAVE_ESC_ALT_OVERRIDE

keyboards/ymdk/bface/keymaps/default/keymap.c

@@ -0,0 +1,60 @@
+/*
+Copyright 2019 Ethan Durrant (emdarcher)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+
+#define _FL 1
+#define _CL 2
+#define KC_X0   LT(_CL, KC_CAPS)   
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    //Base Layer
+    [0] = LAYOUT_60_ansi(
+        KC_GESC,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,KC_BSPC,
+        KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC,KC_RBRC,KC_BSLS,
+        KC_X0,     KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT, KC_ENT,
+        KC_LSFT,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,        KC_RSFT,
+        KC_LCTL,   KC_LGUI,KC_LALT,                KC_SPC,                      KC_RALT,MO(_FL),KC_MENU,KC_RCTL
+    ),
+    //FN Layer
+    [_FL] = LAYOUT_60_ansi(
+        KC_GRV,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PGUP,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_HOME,KC_PGDN, KC_END,KC_TRNS,KC_TRNS,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS, BL_DEC,BL_TOGG, BL_INC,KC_MPLY,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,        KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+    ),
+    //CAPS LOCK layer
+    [_CL] = LAYOUT_60_ansi(
+        KC_GRV,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,  KC_UP,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RIGHT,KC_TRNS,KC_TRNS,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+    ),
+    /* You can copy this layer as base for a new fn layer * /
+	[n] = LAYOUT_60_ansi(
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+    ), 
+    */
+};
+

keyboards/ymdk/bface/keymaps/default/readme.md

@@ -0,0 +1,11 @@
+# Default Keymap
+
+Base Layer:
+![base](https://i.imgur.com/O7rNtDs.jpg)
+
+Standard ANSI 60% Layout.
+
+- GESC for ESC key.
+- FN layer with media and navigation controls.
+- CAPS LOCK layer (when held down) that has arrows mapped to IJKL keys.
+- FN+V = Backlight Toggle, FN+C = Backlight Decrease, FN+B = Backlight Increase

keyboards/ymdk/bface/keymaps/emdarcher/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+#define GRAVE_ESC_ALT_OVERRIDE