From 271431110151ae9cc3e88f7ed2aad4e80a7fb99a Mon Sep 17 00:00:00 2001 From: Diego Song Date: Tue, 24 Mar 2020 14:14:20 -0400 Subject: [PATCH 01/29] VIA Support created for HHKB Hasu Controller config.h keymap.c rules.mk --- keyboards/hhkb/config.h | 4 +-- keyboards/hhkb/keymaps/via/keymap.c | 54 +++++++++++++++++++++++++++++ keyboards/hhkb/keymaps/via/rules.mk | 1 + 3 files changed, 57 insertions(+), 2 deletions(-) create mode 100644 keyboards/hhkb/keymaps/via/keymap.c create mode 100644 keyboards/hhkb/keymaps/via/rules.mk diff --git a/keyboards/hhkb/config.h b/keyboards/hhkb/config.h index fc747a6e9421..291860bee123 100644 --- a/keyboards/hhkb/config.h +++ b/keyboards/hhkb/config.h @@ -21,8 +21,8 @@ along with this program. If not, see . #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0xCAFE +#define VENDOR_ID 0x4848 // HH = happy hacking +#define PRODUCT_ID 0x0001 #define DEVICE_VER 0x0104 #define MANUFACTURER q.m.k #define PRODUCT HHKB mod diff --git a/keyboards/hhkb/keymaps/via/keymap.c b/keyboards/hhkb/keymaps/via/keymap.c new file mode 100644 index 000000000000..37de38103bf0 --- /dev/null +++ b/keyboards/hhkb/keymaps/via/keymap.c @@ -0,0 +1,54 @@ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* BASE Level: Default Layer + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | | + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + | Cont | A | S | D | F | G | H | J | K | L | ; | ' | Ent | | | + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Fn0 | | | + |-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---| + + |------+------+-----------------------+------+------| + | LAlt | LGUI | ******* Space ******* | RGUI | RAlt | + |------+------+-----------------------+------+------| + */ + + [0] = LAYOUT( // default layer + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LALT, KC_LGUI, /* */ KC_SPC, KC_RGUI, KC_RALT + ), + + /* Layer HHKB: HHKB mode (HHKB Fn) + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | Pwr | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | Caps | | | | | | | | Psc | Slk | Pus | Up | | Backs | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | | VoD | VoU | Mut | | | * | / | Hom | PgU | Lef | Rig | Enter | | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + | | | | | | | + | - | End | PgD | Dow | | | | | + |------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----| + + |------+------+----------------------+------+------+ + | **** | **** | ******************** | **** | **** | + |------+------+----------------------+------+------+ + + */ + + [1] = LAYOUT( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_BSPC, + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/hhkb/keymaps/via/rules.mk b/keyboards/hhkb/keymaps/via/rules.mk new file mode 100644 index 000000000000..1e5b99807cb7 --- /dev/null +++ b/keyboards/hhkb/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes From 8aa1f2195a3cf53681d77e72a139e0881fef4057 Mon Sep 17 00:00:00 2001 From: Diego Song Date: Thu, 26 Mar 2020 13:03:29 -0400 Subject: [PATCH 02/29] Add VIA support for HHKB JP with Hasu controller - define distinct PRODUCT_ID and set dynamic layers to 3 to fit EEPROM --- keyboards/hhkb/config.h | 6 ++- keyboards/hhkb/keymaps/via/keymap.c | 14 +++++++ keyboards/hhkb/keymaps/via_jp/config.h | 2 + keyboards/hhkb/keymaps/via_jp/keymap.c | 58 ++++++++++++++++++++++++++ keyboards/hhkb/keymaps/via_jp/rules.mk | 2 + 5 files changed, 81 insertions(+), 1 deletion(-) create mode 100644 keyboards/hhkb/keymaps/via_jp/config.h create mode 100644 keyboards/hhkb/keymaps/via_jp/keymap.c create mode 100644 keyboards/hhkb/keymaps/via_jp/rules.mk diff --git a/keyboards/hhkb/config.h b/keyboards/hhkb/config.h index 291860bee123..23344d610371 100644 --- a/keyboards/hhkb/config.h +++ b/keyboards/hhkb/config.h @@ -22,7 +22,11 @@ along with this program. If not, see . /* USB Device descriptor parameter */ #define VENDOR_ID 0x4848 // HH = happy hacking -#define PRODUCT_ID 0x0001 +#ifdef HHKB_JP + #define PRODUCT_ID 0x0002 // to differentiate from HHKB (ANSI) +#else + #define PRODUCT_ID 0x0001 // ANSI HHKB +#endif #define DEVICE_VER 0x0104 #define MANUFACTURER q.m.k #define PRODUCT HHKB mod diff --git a/keyboards/hhkb/keymaps/via/keymap.c b/keyboards/hhkb/keymaps/via/keymap.c index 37de38103bf0..bdbd32898a00 100644 --- a/keyboards/hhkb/keymaps/via/keymap.c +++ b/keyboards/hhkb/keymaps/via/keymap.c @@ -50,5 +50,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) }; diff --git a/keyboards/hhkb/keymaps/via_jp/config.h b/keyboards/hhkb/keymaps/via_jp/config.h new file mode 100644 index 000000000000..96c85573df1e --- /dev/null +++ b/keyboards/hhkb/keymaps/via_jp/config.h @@ -0,0 +1,2 @@ +// 3 layers or else it will not fit in EEPROM +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/hhkb/keymaps/via_jp/keymap.c b/keyboards/hhkb/keymaps/via_jp/keymap.c new file mode 100644 index 000000000000..ffd3324346cc --- /dev/null +++ b/keyboards/hhkb/keymaps/via_jp/keymap.c @@ -0,0 +1,58 @@ +#include QMK_KEYBOARD_H + +/* Layer 0: HHKB JP + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10| -| =|Yen|Bsp| + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | + * |------------------------------------------------------` Ent| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| `| | + * |-----------------------------------------------------------| + * |Shft | Z| X| C| V| B| N| M| ,| .| /| \| Up|Sft| + * |-----------------------------------------------------------| + * | ||Ctl|Alt|Cmd| | Spc |Bsp| | | ||Lft|Dwn|Rgh| + * `-----------------------------------------------------------' + */ + +/* Layer 1: HHKB mode (HHKB Fn) + * ,-----------------------------------------------------------. + * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Caps | | | | | | | |Psc|Slk|Pus|Up | | | + * |------------------------------------------------------` | + * | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig| | | + * |-----------------------------------------------------------| + * | | | | | | | +| -|End|PgD|Dow| | | | + * |-----------------------------------------------------------| + * | || | | | | | | | | || | | | + * `-----------------------------------------------------------' + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_JP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_UP, KC_RSFT, + MO(1), KC_ZKHK, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_HENK, KC_KANA, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), + + [1] = LAYOUT_JP( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, + _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, KC_PENT, + _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_JP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) +{ + return MACRO_NONE; +} \ No newline at end of file diff --git a/keyboards/hhkb/keymaps/via_jp/rules.mk b/keyboards/hhkb/keymaps/via_jp/rules.mk new file mode 100644 index 000000000000..a7ed37613643 --- /dev/null +++ b/keyboards/hhkb/keymaps/via_jp/rules.mk @@ -0,0 +1,2 @@ +OPT_DEFS += -DHHKB_JP +VIA_ENABLE = yes From 5dd0264eb587568acf1408b92985c8851e56eb08 Mon Sep 17 00:00:00 2001 From: Diego Song Date: Fri, 27 Mar 2020 15:11:37 -0400 Subject: [PATCH 03/29] Split HHKB into ANSI and JP. Tested VIA for ANSI and JP. Hex compilation successful --- keyboards/hhkb/ansi/ansi.c | 1 + keyboards/hhkb/ansi/ansi.h | 25 + keyboards/hhkb/{ => ansi}/config.h | 0 keyboards/hhkb/{ => ansi}/hhkb_avr.h | 0 keyboards/hhkb/ansi/info.json | 73 +++ .../{ => ansi}/keymaps/blakedietz/README.md | 0 .../{ => ansi}/keymaps/blakedietz/config.h | 0 .../{ => ansi}/keymaps/blakedietz/keymap.c | 0 .../{ => ansi}/keymaps/blakedietz/rules.mk | 0 .../hhkb/{ => ansi}/keymaps/brett/config.h | 0 .../hhkb/{ => ansi}/keymaps/brett/keymap.c | 0 .../hhkb/{ => ansi}/keymaps/brett/readme.md | 0 .../hhkb/{ => ansi}/keymaps/brett/rules.mk | 0 .../hhkb/{ => ansi}/keymaps/cinaeco/README.md | 0 .../hhkb/{ => ansi}/keymaps/cinaeco/config.h | 0 .../hhkb/{ => ansi}/keymaps/cinaeco/keymap.c | 0 .../hhkb/{ => ansi}/keymaps/cinaeco/rules.mk | 0 .../hhkb/{ => ansi}/keymaps/dbroqua/keymap.c | 0 .../hhkb/{ => ansi}/keymaps/dbroqua/readme.md | 0 .../hhkb/{ => ansi}/keymaps/default/keymap.c | 0 .../hhkb/{ => ansi}/keymaps/eric/keymap.c | 0 .../dhertz => ansi/keymaps/krusli}/config.h | 0 .../hhkb/{ => ansi}/keymaps/krusli/keymap.c | 0 .../hhkb/{ => ansi}/keymaps/lxol/keymap.c | 0 .../hhkb/{ => ansi}/keymaps/mjt/config.h | 0 .../hhkb/{ => ansi}/keymaps/mjt/keymap.c | 0 .../hhkb/{ => ansi}/keymaps/mjt/readme.md | 0 .../{ => ansi}/keymaps/schaeferdev/README.md | 0 .../{ => ansi}/keymaps/schaeferdev/config.h | 0 .../{ => ansi}/keymaps/schaeferdev/keymap.c | 0 .../{ => ansi}/keymaps/schaeferdev/rules.mk | 0 .../keymaps/shela/action_pseudo_lut.c | 0 .../keymaps/shela/action_pseudo_lut.h | 0 .../hhkb/{ => ansi}/keymaps/shela/config.h | 0 .../hhkb/{ => ansi}/keymaps/shela/keymap.c | 0 .../{ => ansi}/keymaps/shela/keymap_jis2us.h | 0 .../hhkb/{ => ansi}/keymaps/shela/readme.md | 0 .../hhkb/{ => ansi}/keymaps/shela/rules.mk | 0 .../hhkb/{ => ansi}/keymaps/smt/keymap.c | 0 .../{ => ansi}/keymaps/tobiasvl_iso/keymap.c | 0 .../{ => ansi}/keymaps/tobiasvl_iso/readme.md | 0 .../{ => ansi}/keymaps/tominabox1/.gitignore | 0 .../{ => ansi}/keymaps/tominabox1/keymap.c | 0 .../hhkb/{ => ansi}/keymaps/via/keymap.c | 0 .../hhkb/{ => ansi}/keymaps/via/rules.mk | 0 .../hhkb/{ => ansi}/keymaps/xyverz/keymap.c | 0 keyboards/hhkb/{ => ansi}/matrix.c | 0 keyboards/hhkb/{ => ansi}/readme.md | 0 keyboards/hhkb/{ => ansi}/rn42/MEMO.txt | 0 keyboards/hhkb/{ => ansi}/rn42/PowerSave.txt | 0 keyboards/hhkb/{ => ansi}/rn42/RN42.txt | 0 keyboards/hhkb/{ => ansi}/rn42/battery.c | 0 keyboards/hhkb/{ => ansi}/rn42/battery.h | 0 keyboards/hhkb/{ => ansi}/rn42/main.c | 0 keyboards/hhkb/{ => ansi}/rn42/rn42.c | 0 keyboards/hhkb/{ => ansi}/rn42/rn42.h | 0 keyboards/hhkb/{ => ansi}/rn42/rn42_task.c | 0 keyboards/hhkb/{ => ansi}/rn42/rn42_task.h | 0 keyboards/hhkb/{ => ansi}/rn42/suart.S | 0 keyboards/hhkb/{ => ansi}/rn42/suart.h | 0 keyboards/hhkb/{ => ansi}/rules.mk | 0 keyboards/hhkb/hhkb.c | 1 - keyboards/hhkb/jp/config.h | 115 +++++ keyboards/hhkb/jp/hhkb_avr.h | 167 +++++++ keyboards/hhkb/{ => jp}/info.json | 67 +-- keyboards/hhkb/jp/jp.c | 1 + keyboards/hhkb/{hhkb.h => jp/jp.h} | 23 +- .../hhkb/{ => jp}/keymaps/bakingpy/keymap.c | 0 .../hhkb/{ => jp}/keymaps/bakingpy/rules.mk | 0 .../jp => jp/keymaps/default}/keymap.c | 0 .../keymaps/default}/rules.mk | 0 .../keymaps/default_mac}/keymap.c | 0 .../jp => jp/keymaps/default_mac}/rules.mk | 0 .../krusli => jp/keymaps/dhertz}/config.h | 0 .../hhkb/{ => jp}/keymaps/dhertz/keymap.c | 0 .../hhkb/{ => jp}/keymaps/dhertz/keymap.h | 0 .../hhkb/{ => jp}/keymaps/dhertz/rules.mk | 0 .../hhkb/{ => jp}/keymaps/enoch_jp/keymap.c | 0 .../hhkb/{ => jp}/keymaps/enoch_jp/rules.mk | 0 .../{ => jp}/keymaps/halfqwerty_jp/README.md | 0 .../{ => jp}/keymaps/halfqwerty_jp/keymap.c | 0 .../keymaps/halfqwerty_jp}/rules.mk | 0 .../hhkb/{ => jp}/keymaps/rdg_jp/keymap.c | 0 .../hhkb/{ => jp}/keymaps/rdg_jp/rules.mk | 0 .../hhkb/{ => jp}/keymaps/sh_jp/README.md | 0 .../hhkb/{ => jp}/keymaps/sh_jp/keymap.c | 0 .../hhkb/{ => jp}/keymaps/sh_jp/rules.mk | 0 .../via_jp => jp/keymaps/via}/config.h | 0 .../via_jp => jp/keymaps/via}/keymap.c | 0 .../via_jp => jp/keymaps/via}/rules.mk | 0 keyboards/hhkb/jp/matrix.c | 215 ++++++++ keyboards/hhkb/jp/readme.md | 14 + keyboards/hhkb/jp/rn42/MEMO.txt | 262 ++++++++++ keyboards/hhkb/jp/rn42/PowerSave.txt | 88 ++++ keyboards/hhkb/jp/rn42/RN42.txt | 408 +++++++++++++++ keyboards/hhkb/jp/rn42/battery.c | 130 +++++ keyboards/hhkb/jp/rn42/battery.h | 35 ++ keyboards/hhkb/jp/rn42/main.c | 106 ++++ keyboards/hhkb/jp/rn42/rn42.c | 261 ++++++++++ keyboards/hhkb/jp/rn42/rn42.h | 30 ++ keyboards/hhkb/jp/rn42/rn42_task.c | 467 ++++++++++++++++++ keyboards/hhkb/jp/rn42/rn42_task.h | 14 + keyboards/hhkb/jp/rn42/suart.S | 156 ++++++ keyboards/hhkb/jp/rn42/suart.h | 8 + keyboards/hhkb/jp/rules.mk | 69 +++ 105 files changed, 2648 insertions(+), 88 deletions(-) create mode 100644 keyboards/hhkb/ansi/ansi.c create mode 100644 keyboards/hhkb/ansi/ansi.h rename keyboards/hhkb/{ => ansi}/config.h (100%) rename keyboards/hhkb/{ => ansi}/hhkb_avr.h (100%) create mode 100644 keyboards/hhkb/ansi/info.json rename keyboards/hhkb/{ => ansi}/keymaps/blakedietz/README.md (100%) rename keyboards/hhkb/{ => ansi}/keymaps/blakedietz/config.h (100%) rename keyboards/hhkb/{ => ansi}/keymaps/blakedietz/keymap.c (100%) rename keyboards/hhkb/{ => ansi}/keymaps/blakedietz/rules.mk (100%) rename keyboards/hhkb/{ => ansi}/keymaps/brett/config.h (100%) rename keyboards/hhkb/{ => ansi}/keymaps/brett/keymap.c (100%) rename keyboards/hhkb/{ => ansi}/keymaps/brett/readme.md (100%) rename keyboards/hhkb/{ => ansi}/keymaps/brett/rules.mk (100%) rename keyboards/hhkb/{ => ansi}/keymaps/cinaeco/README.md (100%) rename keyboards/hhkb/{ => ansi}/keymaps/cinaeco/config.h (100%) rename keyboards/hhkb/{ => ansi}/keymaps/cinaeco/keymap.c (100%) rename keyboards/hhkb/{ => ansi}/keymaps/cinaeco/rules.mk (100%) rename keyboards/hhkb/{ => ansi}/keymaps/dbroqua/keymap.c (100%) rename keyboards/hhkb/{ => ansi}/keymaps/dbroqua/readme.md (100%) rename keyboards/hhkb/{ => ansi}/keymaps/default/keymap.c (100%) rename keyboards/hhkb/{ => ansi}/keymaps/eric/keymap.c (100%) rename keyboards/hhkb/{keymaps/dhertz => ansi/keymaps/krusli}/config.h (100%) rename keyboards/hhkb/{ => ansi}/keymaps/krusli/keymap.c (100%) rename keyboards/hhkb/{ => ansi}/keymaps/lxol/keymap.c (100%) rename keyboards/hhkb/{ => ansi}/keymaps/mjt/config.h (100%) rename keyboards/hhkb/{ => ansi}/keymaps/mjt/keymap.c (100%) rename keyboards/hhkb/{ => ansi}/keymaps/mjt/readme.md (100%) rename keyboards/hhkb/{ => ansi}/keymaps/schaeferdev/README.md (100%) rename keyboards/hhkb/{ => ansi}/keymaps/schaeferdev/config.h (100%) rename keyboards/hhkb/{ => ansi}/keymaps/schaeferdev/keymap.c (100%) rename keyboards/hhkb/{ => ansi}/keymaps/schaeferdev/rules.mk (100%) rename keyboards/hhkb/{ => ansi}/keymaps/shela/action_pseudo_lut.c (100%) rename keyboards/hhkb/{ => ansi}/keymaps/shela/action_pseudo_lut.h (100%) rename keyboards/hhkb/{ => ansi}/keymaps/shela/config.h (100%) rename keyboards/hhkb/{ => ansi}/keymaps/shela/keymap.c (100%) rename keyboards/hhkb/{ => ansi}/keymaps/shela/keymap_jis2us.h (100%) rename keyboards/hhkb/{ => ansi}/keymaps/shela/readme.md (100%) rename keyboards/hhkb/{ => ansi}/keymaps/shela/rules.mk (100%) rename keyboards/hhkb/{ => ansi}/keymaps/smt/keymap.c (100%) rename keyboards/hhkb/{ => ansi}/keymaps/tobiasvl_iso/keymap.c (100%) rename keyboards/hhkb/{ => ansi}/keymaps/tobiasvl_iso/readme.md (100%) rename keyboards/hhkb/{ => ansi}/keymaps/tominabox1/.gitignore (100%) rename keyboards/hhkb/{ => ansi}/keymaps/tominabox1/keymap.c (100%) rename keyboards/hhkb/{ => ansi}/keymaps/via/keymap.c (100%) rename keyboards/hhkb/{ => ansi}/keymaps/via/rules.mk (100%) rename keyboards/hhkb/{ => ansi}/keymaps/xyverz/keymap.c (100%) rename keyboards/hhkb/{ => ansi}/matrix.c (100%) rename keyboards/hhkb/{ => ansi}/readme.md (100%) rename keyboards/hhkb/{ => ansi}/rn42/MEMO.txt (100%) rename keyboards/hhkb/{ => ansi}/rn42/PowerSave.txt (100%) rename keyboards/hhkb/{ => ansi}/rn42/RN42.txt (100%) rename keyboards/hhkb/{ => ansi}/rn42/battery.c (100%) rename keyboards/hhkb/{ => ansi}/rn42/battery.h (100%) rename keyboards/hhkb/{ => ansi}/rn42/main.c (100%) rename keyboards/hhkb/{ => ansi}/rn42/rn42.c (100%) rename keyboards/hhkb/{ => ansi}/rn42/rn42.h (100%) rename keyboards/hhkb/{ => ansi}/rn42/rn42_task.c (100%) rename keyboards/hhkb/{ => ansi}/rn42/rn42_task.h (100%) rename keyboards/hhkb/{ => ansi}/rn42/suart.S (100%) rename keyboards/hhkb/{ => ansi}/rn42/suart.h (100%) rename keyboards/hhkb/{ => ansi}/rules.mk (100%) delete mode 100644 keyboards/hhkb/hhkb.c create mode 100644 keyboards/hhkb/jp/config.h create mode 100644 keyboards/hhkb/jp/hhkb_avr.h rename keyboards/hhkb/{ => jp}/info.json (53%) create mode 100644 keyboards/hhkb/jp/jp.c rename keyboards/hhkb/{hhkb.h => jp/jp.h} (58%) rename keyboards/hhkb/{ => jp}/keymaps/bakingpy/keymap.c (100%) rename keyboards/hhkb/{ => jp}/keymaps/bakingpy/rules.mk (100%) rename keyboards/hhkb/{keymaps/jp => jp/keymaps/default}/keymap.c (100%) rename keyboards/hhkb/{keymaps/halfqwerty_jp => jp/keymaps/default}/rules.mk (100%) rename keyboards/hhkb/{keymaps/jp_mac => jp/keymaps/default_mac}/keymap.c (100%) rename keyboards/hhkb/{keymaps/jp => jp/keymaps/default_mac}/rules.mk (100%) rename keyboards/hhkb/{keymaps/krusli => jp/keymaps/dhertz}/config.h (100%) rename keyboards/hhkb/{ => jp}/keymaps/dhertz/keymap.c (100%) rename keyboards/hhkb/{ => jp}/keymaps/dhertz/keymap.h (100%) rename keyboards/hhkb/{ => jp}/keymaps/dhertz/rules.mk (100%) rename keyboards/hhkb/{ => jp}/keymaps/enoch_jp/keymap.c (100%) rename keyboards/hhkb/{ => jp}/keymaps/enoch_jp/rules.mk (100%) rename keyboards/hhkb/{ => jp}/keymaps/halfqwerty_jp/README.md (100%) rename keyboards/hhkb/{ => jp}/keymaps/halfqwerty_jp/keymap.c (100%) rename keyboards/hhkb/{keymaps/jp_mac => jp/keymaps/halfqwerty_jp}/rules.mk (100%) rename keyboards/hhkb/{ => jp}/keymaps/rdg_jp/keymap.c (100%) rename keyboards/hhkb/{ => jp}/keymaps/rdg_jp/rules.mk (100%) rename keyboards/hhkb/{ => jp}/keymaps/sh_jp/README.md (100%) rename keyboards/hhkb/{ => jp}/keymaps/sh_jp/keymap.c (100%) rename keyboards/hhkb/{ => jp}/keymaps/sh_jp/rules.mk (100%) rename keyboards/hhkb/{keymaps/via_jp => jp/keymaps/via}/config.h (100%) rename keyboards/hhkb/{keymaps/via_jp => jp/keymaps/via}/keymap.c (100%) rename keyboards/hhkb/{keymaps/via_jp => jp/keymaps/via}/rules.mk (100%) create mode 100644 keyboards/hhkb/jp/matrix.c create mode 100644 keyboards/hhkb/jp/readme.md create mode 100644 keyboards/hhkb/jp/rn42/MEMO.txt create mode 100644 keyboards/hhkb/jp/rn42/PowerSave.txt create mode 100644 keyboards/hhkb/jp/rn42/RN42.txt create mode 100644 keyboards/hhkb/jp/rn42/battery.c create mode 100644 keyboards/hhkb/jp/rn42/battery.h create mode 100644 keyboards/hhkb/jp/rn42/main.c create mode 100644 keyboards/hhkb/jp/rn42/rn42.c create mode 100644 keyboards/hhkb/jp/rn42/rn42.h create mode 100644 keyboards/hhkb/jp/rn42/rn42_task.c create mode 100644 keyboards/hhkb/jp/rn42/rn42_task.h create mode 100644 keyboards/hhkb/jp/rn42/suart.S create mode 100644 keyboards/hhkb/jp/rn42/suart.h create mode 100644 keyboards/hhkb/jp/rules.mk diff --git a/keyboards/hhkb/ansi/ansi.c b/keyboards/hhkb/ansi/ansi.c new file mode 100644 index 000000000000..cefc4e06904e --- /dev/null +++ b/keyboards/hhkb/ansi/ansi.c @@ -0,0 +1 @@ +#include "ansi.h" \ No newline at end of file diff --git a/keyboards/hhkb/ansi/ansi.h b/keyboards/hhkb/ansi/ansi.h new file mode 100644 index 000000000000..5b0c0669f716 --- /dev/null +++ b/keyboards/hhkb/ansi/ansi.h @@ -0,0 +1,25 @@ +#ifndef ANSI_H +#define ANSI_H + +#include "quantum.h" + +#define LAYOUT( \ + K31, K30, K00, K10, K11, K20, K21, K40, K41, K60, K61, K70, K71, K50, K51, \ + K32, K01, K02, K13, K12, K23, K22, K42, K43, K62, K63, K73, K72, K52, \ + K33, K04, K03, K14, K15, K24, K25, K45, K44, K65, K64, K74, K53, \ + K34, K05, K06, K07, K16, K17, K26, K46, K66, K76, K75, K55, K54, \ + K35, K36, K37, K57, K56) \ + \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, KC_NO }, \ + { K50, K51, K52, K53, K54, K55, K56, K57 }, \ + { K60, K61, K62, K63, K64, K65, K66, KC_NO }, \ + { K70, K71, K72, K73, K74, K75, K76, KC_NO } \ +} + + +#endif diff --git a/keyboards/hhkb/config.h b/keyboards/hhkb/ansi/config.h similarity index 100% rename from keyboards/hhkb/config.h rename to keyboards/hhkb/ansi/config.h diff --git a/keyboards/hhkb/hhkb_avr.h b/keyboards/hhkb/ansi/hhkb_avr.h similarity index 100% rename from keyboards/hhkb/hhkb_avr.h rename to keyboards/hhkb/ansi/hhkb_avr.h diff --git a/keyboards/hhkb/ansi/info.json b/keyboards/hhkb/ansi/info.json new file mode 100644 index 000000000000..a36f1d44c82f --- /dev/null +++ b/keyboards/hhkb/ansi/info.json @@ -0,0 +1,73 @@ +{ + "keyboard_name": "HHKB", + "url": "", + "maintainer": "qmk", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "!", "x": 1, "y": 0 }, + { "label": "@", "x": 2, "y": 0 }, + { "label": "#", "x": 3, "y": 0 }, + { "label": "$", "x": 4, "y": 0 }, + { "label": "%", "x": 5, "y": 0 }, + { "label": "^", "x": 6, "y": 0 }, + { "label": "&", "x": 7, "y": 0 }, + { "label": "*", "x": 8, "y": 0 }, + { "label": "(", "x": 9, "y": 0 }, + { "label": ")", "x": 10, "y": 0 }, + { "label": "_", "x": 11, "y": 0 }, + { "label": "+", "x": 12, "y": 0 }, + { "label": "|", "x": 13, "y": 0 }, + { "label": "~", "x": 14, "y": 0 }, + { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 1 }, + { "label": "W", "x": 2.5, "y": 1 }, + { "label": "E", "x": 3.5, "y": 1 }, + { "label": "R", "x": 4.5, "y": 1 }, + { "label": "T", "x": 5.5, "y": 1 }, + { "label": "Y", "x": 6.5, "y": 1 }, + { "label": "U", "x": 7.5, "y": 1 }, + { "label": "I", "x": 8.5, "y": 1 }, + { "label": "O", "x": 9.5, "y": 1 }, + { "label": "P", "x": 10.5, "y": 1 }, + { "label": "{", "x": 11.5, "y": 1 }, + { "label": "}", "x": 12.5, "y": 1 }, + { "label": "Delete", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "Control", "x": 0, "y": 2, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 2 }, + { "label": "S", "x": 2.75, "y": 2 }, + { "label": "D", "x": 3.75, "y": 2 }, + { "label": "F", "x": 4.75, "y": 2 }, + { "label": "G", "x": 5.75, "y": 2 }, + { "label": "H", "x": 6.75, "y": 2 }, + { "label": "J", "x": 7.75, "y": 2 }, + { "label": "K", "x": 8.75, "y": 2 }, + { "label": "L", "x": 9.75, "y": 2 }, + { "label": ":", "x": 10.75, "y": 2 }, + { "label": "\"", "x": 11.75, "y": 2 }, + { "label": "Return", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "Shift", "x": 0, "y": 3, "w": 2.25 }, + { "label": "Z", "x": 2.25, "y": 3 }, + { "label": "X", "x": 3.25, "y": 3 }, + { "label": "C", "x": 4.25, "y": 3 }, + { "label": "V", "x": 5.25, "y": 3 }, + { "label": "B", "x": 6.25, "y": 3 }, + { "label": "N", "x": 7.25, "y": 3 }, + { "label": "M", "x": 8.25, "y": 3 }, + { "label": "<", "x": 9.25, "y": 3 }, + { "label": ">", "x": 10.25, "y": 3 }, + { "label": "?", "x": 11.25, "y": 3 }, + { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "Fn", "x": 14, "y": 3 }, + { "label": "", "x": 1.5, "y": 4 }, + { "label": "", "x": 2.5, "y": 4, "w": 1.5 }, + { "x": 4, "y": 4, "w": 6 }, + { "label": "", "x": 10, "y": 4, "w": 1.5 }, + { "label": "", "x": 11.5, "y": 4 } + ] + } + } +} diff --git a/keyboards/hhkb/keymaps/blakedietz/README.md b/keyboards/hhkb/ansi/keymaps/blakedietz/README.md similarity index 100% rename from keyboards/hhkb/keymaps/blakedietz/README.md rename to keyboards/hhkb/ansi/keymaps/blakedietz/README.md diff --git a/keyboards/hhkb/keymaps/blakedietz/config.h b/keyboards/hhkb/ansi/keymaps/blakedietz/config.h similarity index 100% rename from keyboards/hhkb/keymaps/blakedietz/config.h rename to keyboards/hhkb/ansi/keymaps/blakedietz/config.h diff --git a/keyboards/hhkb/keymaps/blakedietz/keymap.c b/keyboards/hhkb/ansi/keymaps/blakedietz/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/blakedietz/keymap.c rename to keyboards/hhkb/ansi/keymaps/blakedietz/keymap.c diff --git a/keyboards/hhkb/keymaps/blakedietz/rules.mk b/keyboards/hhkb/ansi/keymaps/blakedietz/rules.mk similarity index 100% rename from keyboards/hhkb/keymaps/blakedietz/rules.mk rename to keyboards/hhkb/ansi/keymaps/blakedietz/rules.mk diff --git a/keyboards/hhkb/keymaps/brett/config.h b/keyboards/hhkb/ansi/keymaps/brett/config.h similarity index 100% rename from keyboards/hhkb/keymaps/brett/config.h rename to keyboards/hhkb/ansi/keymaps/brett/config.h diff --git a/keyboards/hhkb/keymaps/brett/keymap.c b/keyboards/hhkb/ansi/keymaps/brett/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/brett/keymap.c rename to keyboards/hhkb/ansi/keymaps/brett/keymap.c diff --git a/keyboards/hhkb/keymaps/brett/readme.md b/keyboards/hhkb/ansi/keymaps/brett/readme.md similarity index 100% rename from keyboards/hhkb/keymaps/brett/readme.md rename to keyboards/hhkb/ansi/keymaps/brett/readme.md diff --git a/keyboards/hhkb/keymaps/brett/rules.mk b/keyboards/hhkb/ansi/keymaps/brett/rules.mk similarity index 100% rename from keyboards/hhkb/keymaps/brett/rules.mk rename to keyboards/hhkb/ansi/keymaps/brett/rules.mk diff --git a/keyboards/hhkb/keymaps/cinaeco/README.md b/keyboards/hhkb/ansi/keymaps/cinaeco/README.md similarity index 100% rename from keyboards/hhkb/keymaps/cinaeco/README.md rename to keyboards/hhkb/ansi/keymaps/cinaeco/README.md diff --git a/keyboards/hhkb/keymaps/cinaeco/config.h b/keyboards/hhkb/ansi/keymaps/cinaeco/config.h similarity index 100% rename from keyboards/hhkb/keymaps/cinaeco/config.h rename to keyboards/hhkb/ansi/keymaps/cinaeco/config.h diff --git a/keyboards/hhkb/keymaps/cinaeco/keymap.c b/keyboards/hhkb/ansi/keymaps/cinaeco/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/cinaeco/keymap.c rename to keyboards/hhkb/ansi/keymaps/cinaeco/keymap.c diff --git a/keyboards/hhkb/keymaps/cinaeco/rules.mk b/keyboards/hhkb/ansi/keymaps/cinaeco/rules.mk similarity index 100% rename from keyboards/hhkb/keymaps/cinaeco/rules.mk rename to keyboards/hhkb/ansi/keymaps/cinaeco/rules.mk diff --git a/keyboards/hhkb/keymaps/dbroqua/keymap.c b/keyboards/hhkb/ansi/keymaps/dbroqua/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/dbroqua/keymap.c rename to keyboards/hhkb/ansi/keymaps/dbroqua/keymap.c diff --git a/keyboards/hhkb/keymaps/dbroqua/readme.md b/keyboards/hhkb/ansi/keymaps/dbroqua/readme.md similarity index 100% rename from keyboards/hhkb/keymaps/dbroqua/readme.md rename to keyboards/hhkb/ansi/keymaps/dbroqua/readme.md diff --git a/keyboards/hhkb/keymaps/default/keymap.c b/keyboards/hhkb/ansi/keymaps/default/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/default/keymap.c rename to keyboards/hhkb/ansi/keymaps/default/keymap.c diff --git a/keyboards/hhkb/keymaps/eric/keymap.c b/keyboards/hhkb/ansi/keymaps/eric/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/eric/keymap.c rename to keyboards/hhkb/ansi/keymaps/eric/keymap.c diff --git a/keyboards/hhkb/keymaps/dhertz/config.h b/keyboards/hhkb/ansi/keymaps/krusli/config.h similarity index 100% rename from keyboards/hhkb/keymaps/dhertz/config.h rename to keyboards/hhkb/ansi/keymaps/krusli/config.h diff --git a/keyboards/hhkb/keymaps/krusli/keymap.c b/keyboards/hhkb/ansi/keymaps/krusli/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/krusli/keymap.c rename to keyboards/hhkb/ansi/keymaps/krusli/keymap.c diff --git a/keyboards/hhkb/keymaps/lxol/keymap.c b/keyboards/hhkb/ansi/keymaps/lxol/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/lxol/keymap.c rename to keyboards/hhkb/ansi/keymaps/lxol/keymap.c diff --git a/keyboards/hhkb/keymaps/mjt/config.h b/keyboards/hhkb/ansi/keymaps/mjt/config.h similarity index 100% rename from keyboards/hhkb/keymaps/mjt/config.h rename to keyboards/hhkb/ansi/keymaps/mjt/config.h diff --git a/keyboards/hhkb/keymaps/mjt/keymap.c b/keyboards/hhkb/ansi/keymaps/mjt/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/mjt/keymap.c rename to keyboards/hhkb/ansi/keymaps/mjt/keymap.c diff --git a/keyboards/hhkb/keymaps/mjt/readme.md b/keyboards/hhkb/ansi/keymaps/mjt/readme.md similarity index 100% rename from keyboards/hhkb/keymaps/mjt/readme.md rename to keyboards/hhkb/ansi/keymaps/mjt/readme.md diff --git a/keyboards/hhkb/keymaps/schaeferdev/README.md b/keyboards/hhkb/ansi/keymaps/schaeferdev/README.md similarity index 100% rename from keyboards/hhkb/keymaps/schaeferdev/README.md rename to keyboards/hhkb/ansi/keymaps/schaeferdev/README.md diff --git a/keyboards/hhkb/keymaps/schaeferdev/config.h b/keyboards/hhkb/ansi/keymaps/schaeferdev/config.h similarity index 100% rename from keyboards/hhkb/keymaps/schaeferdev/config.h rename to keyboards/hhkb/ansi/keymaps/schaeferdev/config.h diff --git a/keyboards/hhkb/keymaps/schaeferdev/keymap.c b/keyboards/hhkb/ansi/keymaps/schaeferdev/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/schaeferdev/keymap.c rename to keyboards/hhkb/ansi/keymaps/schaeferdev/keymap.c diff --git a/keyboards/hhkb/keymaps/schaeferdev/rules.mk b/keyboards/hhkb/ansi/keymaps/schaeferdev/rules.mk similarity index 100% rename from keyboards/hhkb/keymaps/schaeferdev/rules.mk rename to keyboards/hhkb/ansi/keymaps/schaeferdev/rules.mk diff --git a/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c b/keyboards/hhkb/ansi/keymaps/shela/action_pseudo_lut.c similarity index 100% rename from keyboards/hhkb/keymaps/shela/action_pseudo_lut.c rename to keyboards/hhkb/ansi/keymaps/shela/action_pseudo_lut.c diff --git a/keyboards/hhkb/keymaps/shela/action_pseudo_lut.h b/keyboards/hhkb/ansi/keymaps/shela/action_pseudo_lut.h similarity index 100% rename from keyboards/hhkb/keymaps/shela/action_pseudo_lut.h rename to keyboards/hhkb/ansi/keymaps/shela/action_pseudo_lut.h diff --git a/keyboards/hhkb/keymaps/shela/config.h b/keyboards/hhkb/ansi/keymaps/shela/config.h similarity index 100% rename from keyboards/hhkb/keymaps/shela/config.h rename to keyboards/hhkb/ansi/keymaps/shela/config.h diff --git a/keyboards/hhkb/keymaps/shela/keymap.c b/keyboards/hhkb/ansi/keymaps/shela/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/shela/keymap.c rename to keyboards/hhkb/ansi/keymaps/shela/keymap.c diff --git a/keyboards/hhkb/keymaps/shela/keymap_jis2us.h b/keyboards/hhkb/ansi/keymaps/shela/keymap_jis2us.h similarity index 100% rename from keyboards/hhkb/keymaps/shela/keymap_jis2us.h rename to keyboards/hhkb/ansi/keymaps/shela/keymap_jis2us.h diff --git a/keyboards/hhkb/keymaps/shela/readme.md b/keyboards/hhkb/ansi/keymaps/shela/readme.md similarity index 100% rename from keyboards/hhkb/keymaps/shela/readme.md rename to keyboards/hhkb/ansi/keymaps/shela/readme.md diff --git a/keyboards/hhkb/keymaps/shela/rules.mk b/keyboards/hhkb/ansi/keymaps/shela/rules.mk similarity index 100% rename from keyboards/hhkb/keymaps/shela/rules.mk rename to keyboards/hhkb/ansi/keymaps/shela/rules.mk diff --git a/keyboards/hhkb/keymaps/smt/keymap.c b/keyboards/hhkb/ansi/keymaps/smt/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/smt/keymap.c rename to keyboards/hhkb/ansi/keymaps/smt/keymap.c diff --git a/keyboards/hhkb/keymaps/tobiasvl_iso/keymap.c b/keyboards/hhkb/ansi/keymaps/tobiasvl_iso/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/tobiasvl_iso/keymap.c rename to keyboards/hhkb/ansi/keymaps/tobiasvl_iso/keymap.c diff --git a/keyboards/hhkb/keymaps/tobiasvl_iso/readme.md b/keyboards/hhkb/ansi/keymaps/tobiasvl_iso/readme.md similarity index 100% rename from keyboards/hhkb/keymaps/tobiasvl_iso/readme.md rename to keyboards/hhkb/ansi/keymaps/tobiasvl_iso/readme.md diff --git a/keyboards/hhkb/keymaps/tominabox1/.gitignore b/keyboards/hhkb/ansi/keymaps/tominabox1/.gitignore similarity index 100% rename from keyboards/hhkb/keymaps/tominabox1/.gitignore rename to keyboards/hhkb/ansi/keymaps/tominabox1/.gitignore diff --git a/keyboards/hhkb/keymaps/tominabox1/keymap.c b/keyboards/hhkb/ansi/keymaps/tominabox1/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/tominabox1/keymap.c rename to keyboards/hhkb/ansi/keymaps/tominabox1/keymap.c diff --git a/keyboards/hhkb/keymaps/via/keymap.c b/keyboards/hhkb/ansi/keymaps/via/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/via/keymap.c rename to keyboards/hhkb/ansi/keymaps/via/keymap.c diff --git a/keyboards/hhkb/keymaps/via/rules.mk b/keyboards/hhkb/ansi/keymaps/via/rules.mk similarity index 100% rename from keyboards/hhkb/keymaps/via/rules.mk rename to keyboards/hhkb/ansi/keymaps/via/rules.mk diff --git a/keyboards/hhkb/keymaps/xyverz/keymap.c b/keyboards/hhkb/ansi/keymaps/xyverz/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/xyverz/keymap.c rename to keyboards/hhkb/ansi/keymaps/xyverz/keymap.c diff --git a/keyboards/hhkb/matrix.c b/keyboards/hhkb/ansi/matrix.c similarity index 100% rename from keyboards/hhkb/matrix.c rename to keyboards/hhkb/ansi/matrix.c diff --git a/keyboards/hhkb/readme.md b/keyboards/hhkb/ansi/readme.md similarity index 100% rename from keyboards/hhkb/readme.md rename to keyboards/hhkb/ansi/readme.md diff --git a/keyboards/hhkb/rn42/MEMO.txt b/keyboards/hhkb/ansi/rn42/MEMO.txt similarity index 100% rename from keyboards/hhkb/rn42/MEMO.txt rename to keyboards/hhkb/ansi/rn42/MEMO.txt diff --git a/keyboards/hhkb/rn42/PowerSave.txt b/keyboards/hhkb/ansi/rn42/PowerSave.txt similarity index 100% rename from keyboards/hhkb/rn42/PowerSave.txt rename to keyboards/hhkb/ansi/rn42/PowerSave.txt diff --git a/keyboards/hhkb/rn42/RN42.txt b/keyboards/hhkb/ansi/rn42/RN42.txt similarity index 100% rename from keyboards/hhkb/rn42/RN42.txt rename to keyboards/hhkb/ansi/rn42/RN42.txt diff --git a/keyboards/hhkb/rn42/battery.c b/keyboards/hhkb/ansi/rn42/battery.c similarity index 100% rename from keyboards/hhkb/rn42/battery.c rename to keyboards/hhkb/ansi/rn42/battery.c diff --git a/keyboards/hhkb/rn42/battery.h b/keyboards/hhkb/ansi/rn42/battery.h similarity index 100% rename from keyboards/hhkb/rn42/battery.h rename to keyboards/hhkb/ansi/rn42/battery.h diff --git a/keyboards/hhkb/rn42/main.c b/keyboards/hhkb/ansi/rn42/main.c similarity index 100% rename from keyboards/hhkb/rn42/main.c rename to keyboards/hhkb/ansi/rn42/main.c diff --git a/keyboards/hhkb/rn42/rn42.c b/keyboards/hhkb/ansi/rn42/rn42.c similarity index 100% rename from keyboards/hhkb/rn42/rn42.c rename to keyboards/hhkb/ansi/rn42/rn42.c diff --git a/keyboards/hhkb/rn42/rn42.h b/keyboards/hhkb/ansi/rn42/rn42.h similarity index 100% rename from keyboards/hhkb/rn42/rn42.h rename to keyboards/hhkb/ansi/rn42/rn42.h diff --git a/keyboards/hhkb/rn42/rn42_task.c b/keyboards/hhkb/ansi/rn42/rn42_task.c similarity index 100% rename from keyboards/hhkb/rn42/rn42_task.c rename to keyboards/hhkb/ansi/rn42/rn42_task.c diff --git a/keyboards/hhkb/rn42/rn42_task.h b/keyboards/hhkb/ansi/rn42/rn42_task.h similarity index 100% rename from keyboards/hhkb/rn42/rn42_task.h rename to keyboards/hhkb/ansi/rn42/rn42_task.h diff --git a/keyboards/hhkb/rn42/suart.S b/keyboards/hhkb/ansi/rn42/suart.S similarity index 100% rename from keyboards/hhkb/rn42/suart.S rename to keyboards/hhkb/ansi/rn42/suart.S diff --git a/keyboards/hhkb/rn42/suart.h b/keyboards/hhkb/ansi/rn42/suart.h similarity index 100% rename from keyboards/hhkb/rn42/suart.h rename to keyboards/hhkb/ansi/rn42/suart.h diff --git a/keyboards/hhkb/rules.mk b/keyboards/hhkb/ansi/rules.mk similarity index 100% rename from keyboards/hhkb/rules.mk rename to keyboards/hhkb/ansi/rules.mk diff --git a/keyboards/hhkb/hhkb.c b/keyboards/hhkb/hhkb.c deleted file mode 100644 index a9d35123ffa0..000000000000 --- a/keyboards/hhkb/hhkb.c +++ /dev/null @@ -1 +0,0 @@ -#include "hhkb.h" \ No newline at end of file diff --git a/keyboards/hhkb/jp/config.h b/keyboards/hhkb/jp/config.h new file mode 100644 index 000000000000..23344d610371 --- /dev/null +++ b/keyboards/hhkb/jp/config.h @@ -0,0 +1,115 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4848 // HH = happy hacking +#ifdef HHKB_JP + #define PRODUCT_ID 0x0002 // to differentiate from HHKB (ANSI) +#else + #define PRODUCT_ID 0x0001 // ANSI HHKB +#endif +#define DEVICE_VER 0x0104 +#define MANUFACTURER q.m.k +#define PRODUCT HHKB mod +#define DESCRIPTION q.m.k keyboard firmware for HHKB + +/* key matrix size */ +#ifdef HHKB_JP +# define MATRIX_ROWS 16 +#else +# define MATRIX_ROWS 8 +#endif +#define MATRIX_COLS 8 + +#define TAPPING_TERM 200 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +#ifdef HHKB_RN42_ENABLE +// rn42 support -- acquired from the tmk repo. This is almost certainly not +// integrated with qmk in the correct way. + +#define SUART_OUT_PORT PORTD +#define SUART_OUT_BIT 0 +#define SUART_IN_PIN PIND +#define SUART_IN_BIT 1 + +#ifdef __AVR_ATmega32U4__ + /* iom32u4.h has no definition of UCSR1D. copy from iom32u2.h */ + #define UCSR1D _SFR_MEM8(0xCB) + #define RTSEN 0 + #define CTSEN 1 + + #define SERIAL_UART_BAUD 115200 + #define SERIAL_UART_DATA UDR1 + #define SERIAL_UART_UBRR ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5)) + #define SERIAL_UART_RXD_VECT USART1_RX_vect + #define SERIAL_UART_TXD_READY (UCSR1A&(1<>8); /* baud rate */ \ + UCSR1B |= (1< +#include +#include +#include +#include + + +// Timer resolution check +#if (1000000/TIMER_RAW_FREQ > 20) +# error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB." +#endif + + +/* + * HHKB Matrix I/O + * + * row: HC4051[A,B,C] selects scan row0-7 + * row-ext: [En0,En1] row extention for JP + * col: LS145[A,B,C,D] selects scan col0-7 and enable(D) + * key: on: 0/off: 1 + * prev: hysteresis control: assert(1) when previous key state is on + */ + + +#if defined(__AVR_ATmega32U4__) +/* + * For TMK HHKB alt controller(ATMega32U4) + * + * row: PB0-2 + * col: PB3-5,6 + * key: PD7(pull-uped) + * prev: PB7 + * power: PD4(L:off/H:on) + * row-ext: PC6,7 for HHKB JP(active low) + */ +static inline void KEY_ENABLE(void) { (PORTB &= ~(1<<6)); } +static inline void KEY_UNABLE(void) { (PORTB |= (1<<6)); } +static inline bool KEY_STATE(void) { return (PIND & (1<<7)); } +static inline void KEY_PREV_ON(void) { (PORTB |= (1<<7)); } +static inline void KEY_PREV_OFF(void) { (PORTB &= ~(1<<7)); } +#ifdef HHKB_POWER_SAVING +static inline void KEY_POWER_ON(void) { + DDRB = 0xFF; PORTB = 0x40; // change pins output + DDRD |= (1<<4); PORTD |= (1<<4); // MOS FET switch on + /* Without this wait you will miss or get false key events. */ + _delay_ms(5); // wait for powering up +} +static inline void KEY_POWER_OFF(void) { + /* input with pull-up consumes less than without it when pin is open. */ + DDRB = 0x00; PORTB = 0xFF; // change pins input with pull-up + DDRD |= (1<<4); PORTD &= ~(1<<4); // MOS FET switch off +} +static inline bool KEY_POWER_STATE(void) { return PORTD & (1<<4); } +#else +static inline void KEY_POWER_ON(void) {} +static inline void KEY_POWER_OFF(void) {} +static inline bool KEY_POWER_STATE(void) { return true; } +#endif +static inline void KEY_INIT(void) +{ + /* row,col,prev: output */ + DDRB = 0xFF; + PORTB = 0x40; // unable + /* key: input with pull-up */ + DDRD &= ~0x80; + PORTD |= 0x80; +#ifdef HHKB_JP + /* row extention for HHKB JP */ + DDRC |= (1<<6|1<<7); + PORTC |= (1<<6|1<<7); +#endif + KEY_UNABLE(); + KEY_PREV_OFF(); + + KEY_POWER_OFF(); +} +static inline void KEY_SELECT(uint8_t ROW, uint8_t COL) +{ + PORTB = (PORTB & 0xC0) | (((COL) & 0x07)<<3) | ((ROW) & 0x07); +#ifdef HHKB_JP + if ((ROW) & 0x08) PORTC = (PORTC & ~(1<<6|1<<7)) | (1<<6); + else PORTC = (PORTC & ~(1<<6|1<<7)) | (1<<7); +#endif +} + + +#elif defined(__AVR_AT90USB1286__) +/* + * For Teensy++(AT90USB1286) + * + * HHKB pro HHKB pro2 + * row: PB0-2 (6-8) (5-7) + * col: PB3-5,6 (9-12) (8-11) + * key: PE6(pull-uped) (4) (3) + * prev: PE7 (5) (4) + * + * TODO: convert into 'staitc inline' function + */ +#define KEY_INIT() do { \ + DDRB |= 0x7F; \ + DDRE |= (1<<7); \ + DDRE &= ~(1<<6); \ + PORTE |= (1<<6); \ +} while (0) +#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \ + (((COL) & 0x07)<<3) | \ + ((ROW) & 0x07)) +#define KEY_ENABLE() (PORTB &= ~(1<<6)) +#define KEY_UNABLE() (PORTB |= (1<<6)) +#define KEY_STATE() (PINE & (1<<6)) +#define KEY_PREV_ON() (PORTE |= (1<<7)) +#define KEY_PREV_OFF() (PORTE &= ~(1<<7)) +#define KEY_POWER_ON() +#define KEY_POWER_OFF() +#define KEY_POWER_STATE() true + + +#else +# error "define code for matrix scan" +#endif + + +#if 0 +// For ATMega328P with V-USB +// +// #elif defined(__AVR_ATmega328P__) +// Ports for V-USB +// key: PB0(pull-uped) +// prev: PB1 +// row: PB2-4 +// col: PC0-2,3 +// power: PB5(Low:on/Hi-z:off) +#define KEY_INIT() do { \ + DDRB |= 0x3E; \ + DDRB &= ~(1<<0); \ + PORTB |= 1<<0; \ + DDRC |= 0x0F; \ + KEY_UNABLE(); \ + KEY_PREV_OFF(); \ +} while (0) +#define KEY_SELECT(ROW, COL) do { \ + PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \ + PORTC = (PORTC & 0xF8) | ((COL) & 0x07); \ +} while (0) +#define KEY_ENABLE() (PORTC &= ~(1<<3)) +#define KEY_UNABLE() (PORTC |= (1<<3)) +#define KEY_STATE() (PINB & (1<<0)) +#define KEY_PREV_ON() (PORTB |= (1<<1)) +#define KEY_PREV_OFF() (PORTB &= ~(1<<1)) +// Power supply switching +#define KEY_POWER_ON() do { \ + KEY_INIT(); \ + PORTB &= ~(1<<5); \ + _delay_ms(1); \ +} while (0) +#define KEY_POWER_OFF() do { \ + DDRB &= ~0x3F; \ + PORTB &= ~0x3F; \ + DDRC &= ~0x0F; \ + PORTC &= ~0x0F; \ +} while (0) +#endif + +#endif diff --git a/keyboards/hhkb/info.json b/keyboards/hhkb/jp/info.json similarity index 53% rename from keyboards/hhkb/info.json rename to keyboards/hhkb/jp/info.json index 3beaff83da9a..7594987d96c3 100644 --- a/keyboards/hhkb/info.json +++ b/keyboards/hhkb/jp/info.json @@ -1,75 +1,10 @@ { - "keyboard_name": "hhkb", + "keyboard_name": "HHKB JP", "url": "", "maintainer": "qmk", "width": 15, "height": 5, "layouts": { - "LAYOUT": { - "layout": [ - { "label": "Esc", "x": 0, "y": 0 }, - { "label": "!", "x": 1, "y": 0 }, - { "label": "@", "x": 2, "y": 0 }, - { "label": "#", "x": 3, "y": 0 }, - { "label": "$", "x": 4, "y": 0 }, - { "label": "%", "x": 5, "y": 0 }, - { "label": "^", "x": 6, "y": 0 }, - { "label": "&", "x": 7, "y": 0 }, - { "label": "*", "x": 8, "y": 0 }, - { "label": "(", "x": 9, "y": 0 }, - { "label": ")", "x": 10, "y": 0 }, - { "label": "_", "x": 11, "y": 0 }, - { "label": "+", "x": 12, "y": 0 }, - { "label": "|", "x": 13, "y": 0 }, - { "label": "~", "x": 14, "y": 0 }, - { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, - { "label": "Q", "x": 1.5, "y": 1 }, - { "label": "W", "x": 2.5, "y": 1 }, - { "label": "E", "x": 3.5, "y": 1 }, - { "label": "R", "x": 4.5, "y": 1 }, - { "label": "T", "x": 5.5, "y": 1 }, - { "label": "Y", "x": 6.5, "y": 1 }, - { "label": "U", "x": 7.5, "y": 1 }, - { "label": "I", "x": 8.5, "y": 1 }, - { "label": "O", "x": 9.5, "y": 1 }, - { "label": "P", "x": 10.5, "y": 1 }, - { "label": "{", "x": 11.5, "y": 1 }, - { "label": "}", "x": 12.5, "y": 1 }, - { "label": "Delete", "x": 13.5, "y": 1, "w": 1.5 }, - { "label": "Control", "x": 0, "y": 2, "w": 1.75 }, - { "label": "A", "x": 1.75, "y": 2 }, - { "label": "S", "x": 2.75, "y": 2 }, - { "label": "D", "x": 3.75, "y": 2 }, - { "label": "F", "x": 4.75, "y": 2 }, - { "label": "G", "x": 5.75, "y": 2 }, - { "label": "H", "x": 6.75, "y": 2 }, - { "label": "J", "x": 7.75, "y": 2 }, - { "label": "K", "x": 8.75, "y": 2 }, - { "label": "L", "x": 9.75, "y": 2 }, - { "label": ":", "x": 10.75, "y": 2 }, - { "label": "\"", "x": 11.75, "y": 2 }, - { "label": "Return", "x": 12.75, "y": 2, "w": 2.25 }, - { "label": "Shift", "x": 0, "y": 3, "w": 2.25 }, - { "label": "Z", "x": 2.25, "y": 3 }, - { "label": "X", "x": 3.25, "y": 3 }, - { "label": "C", "x": 4.25, "y": 3 }, - { "label": "V", "x": 5.25, "y": 3 }, - { "label": "B", "x": 6.25, "y": 3 }, - { "label": "N", "x": 7.25, "y": 3 }, - { "label": "M", "x": 8.25, "y": 3 }, - { "label": "<", "x": 9.25, "y": 3 }, - { "label": ">", "x": 10.25, "y": 3 }, - { "label": "?", "x": 11.25, "y": 3 }, - { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, - { "label": "Fn", "x": 14, "y": 3 }, - { "label": "", "x": 1.5, "y": 4 }, - { "label": "", "x": 2.5, "y": 4, "w": 1.5 }, - { "x": 4, "y": 4, "w": 6 }, - { "label": "", "x": 10, "y": 4, "w": 1.5 }, - { "label": "", "x": 11.5, "y": 4 } - ] - }, - "LAYOUT_JP": { "layout": [ { "label": "Esc", "x": 0, "y": 0 }, diff --git a/keyboards/hhkb/jp/jp.c b/keyboards/hhkb/jp/jp.c new file mode 100644 index 000000000000..f1f1388c7739 --- /dev/null +++ b/keyboards/hhkb/jp/jp.c @@ -0,0 +1 @@ +#include "jp.h" \ No newline at end of file diff --git a/keyboards/hhkb/hhkb.h b/keyboards/hhkb/jp/jp.h similarity index 58% rename from keyboards/hhkb/hhkb.h rename to keyboards/hhkb/jp/jp.h index 30dc039a4c1f..7617e11110a2 100644 --- a/keyboards/hhkb/hhkb.h +++ b/keyboards/hhkb/jp/jp.h @@ -1,27 +1,8 @@ -#ifndef HHKB_H -#define HHKB_H +#ifndef JP_H +#define JP_H #include "quantum.h" -#define LAYOUT( \ - K31, K30, K00, K10, K11, K20, K21, K40, K41, K60, K61, K70, K71, K50, K51, \ - K32, K01, K02, K13, K12, K23, K22, K42, K43, K62, K63, K73, K72, K52, \ - K33, K04, K03, K14, K15, K24, K25, K45, K44, K65, K64, K74, K53, \ - K34, K05, K06, K07, K16, K17, K26, K46, K66, K76, K75, K55, K54, \ - K35, K36, K37, K57, K56) \ - \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07 }, \ - { K10, K11, K12, K13, K14, K15, K16, K17 }, \ - { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ - { K30, K31, K32, K33, K34, K35, K36, K37 }, \ - { K40, K41, K42, K43, K44, K45, K46, KC_NO }, \ - { K50, K51, K52, K53, K54, K55, K56, K57 }, \ - { K60, K61, K62, K63, K64, K65, K66, KC_NO }, \ - { K70, K71, K72, K73, K74, K75, K76, KC_NO } \ -} - - #define LAYOUT_JP( \ K02, K32, K62, K22, K12, K52, K72, KA2, K92, K82, KB2, KE2, KF2, KD2, KC2, \ K03, K63, K23, K13, K53, K73, KA3, K93, K83, KB3, KE3, KF3, KD3, \ diff --git a/keyboards/hhkb/keymaps/bakingpy/keymap.c b/keyboards/hhkb/jp/keymaps/bakingpy/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/bakingpy/keymap.c rename to keyboards/hhkb/jp/keymaps/bakingpy/keymap.c diff --git a/keyboards/hhkb/keymaps/bakingpy/rules.mk b/keyboards/hhkb/jp/keymaps/bakingpy/rules.mk similarity index 100% rename from keyboards/hhkb/keymaps/bakingpy/rules.mk rename to keyboards/hhkb/jp/keymaps/bakingpy/rules.mk diff --git a/keyboards/hhkb/keymaps/jp/keymap.c b/keyboards/hhkb/jp/keymaps/default/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/jp/keymap.c rename to keyboards/hhkb/jp/keymaps/default/keymap.c diff --git a/keyboards/hhkb/keymaps/halfqwerty_jp/rules.mk b/keyboards/hhkb/jp/keymaps/default/rules.mk similarity index 100% rename from keyboards/hhkb/keymaps/halfqwerty_jp/rules.mk rename to keyboards/hhkb/jp/keymaps/default/rules.mk diff --git a/keyboards/hhkb/keymaps/jp_mac/keymap.c b/keyboards/hhkb/jp/keymaps/default_mac/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/jp_mac/keymap.c rename to keyboards/hhkb/jp/keymaps/default_mac/keymap.c diff --git a/keyboards/hhkb/keymaps/jp/rules.mk b/keyboards/hhkb/jp/keymaps/default_mac/rules.mk similarity index 100% rename from keyboards/hhkb/keymaps/jp/rules.mk rename to keyboards/hhkb/jp/keymaps/default_mac/rules.mk diff --git a/keyboards/hhkb/keymaps/krusli/config.h b/keyboards/hhkb/jp/keymaps/dhertz/config.h similarity index 100% rename from keyboards/hhkb/keymaps/krusli/config.h rename to keyboards/hhkb/jp/keymaps/dhertz/config.h diff --git a/keyboards/hhkb/keymaps/dhertz/keymap.c b/keyboards/hhkb/jp/keymaps/dhertz/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/dhertz/keymap.c rename to keyboards/hhkb/jp/keymaps/dhertz/keymap.c diff --git a/keyboards/hhkb/keymaps/dhertz/keymap.h b/keyboards/hhkb/jp/keymaps/dhertz/keymap.h similarity index 100% rename from keyboards/hhkb/keymaps/dhertz/keymap.h rename to keyboards/hhkb/jp/keymaps/dhertz/keymap.h diff --git a/keyboards/hhkb/keymaps/dhertz/rules.mk b/keyboards/hhkb/jp/keymaps/dhertz/rules.mk similarity index 100% rename from keyboards/hhkb/keymaps/dhertz/rules.mk rename to keyboards/hhkb/jp/keymaps/dhertz/rules.mk diff --git a/keyboards/hhkb/keymaps/enoch_jp/keymap.c b/keyboards/hhkb/jp/keymaps/enoch_jp/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/enoch_jp/keymap.c rename to keyboards/hhkb/jp/keymaps/enoch_jp/keymap.c diff --git a/keyboards/hhkb/keymaps/enoch_jp/rules.mk b/keyboards/hhkb/jp/keymaps/enoch_jp/rules.mk similarity index 100% rename from keyboards/hhkb/keymaps/enoch_jp/rules.mk rename to keyboards/hhkb/jp/keymaps/enoch_jp/rules.mk diff --git a/keyboards/hhkb/keymaps/halfqwerty_jp/README.md b/keyboards/hhkb/jp/keymaps/halfqwerty_jp/README.md similarity index 100% rename from keyboards/hhkb/keymaps/halfqwerty_jp/README.md rename to keyboards/hhkb/jp/keymaps/halfqwerty_jp/README.md diff --git a/keyboards/hhkb/keymaps/halfqwerty_jp/keymap.c b/keyboards/hhkb/jp/keymaps/halfqwerty_jp/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/halfqwerty_jp/keymap.c rename to keyboards/hhkb/jp/keymaps/halfqwerty_jp/keymap.c diff --git a/keyboards/hhkb/keymaps/jp_mac/rules.mk b/keyboards/hhkb/jp/keymaps/halfqwerty_jp/rules.mk similarity index 100% rename from keyboards/hhkb/keymaps/jp_mac/rules.mk rename to keyboards/hhkb/jp/keymaps/halfqwerty_jp/rules.mk diff --git a/keyboards/hhkb/keymaps/rdg_jp/keymap.c b/keyboards/hhkb/jp/keymaps/rdg_jp/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/rdg_jp/keymap.c rename to keyboards/hhkb/jp/keymaps/rdg_jp/keymap.c diff --git a/keyboards/hhkb/keymaps/rdg_jp/rules.mk b/keyboards/hhkb/jp/keymaps/rdg_jp/rules.mk similarity index 100% rename from keyboards/hhkb/keymaps/rdg_jp/rules.mk rename to keyboards/hhkb/jp/keymaps/rdg_jp/rules.mk diff --git a/keyboards/hhkb/keymaps/sh_jp/README.md b/keyboards/hhkb/jp/keymaps/sh_jp/README.md similarity index 100% rename from keyboards/hhkb/keymaps/sh_jp/README.md rename to keyboards/hhkb/jp/keymaps/sh_jp/README.md diff --git a/keyboards/hhkb/keymaps/sh_jp/keymap.c b/keyboards/hhkb/jp/keymaps/sh_jp/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/sh_jp/keymap.c rename to keyboards/hhkb/jp/keymaps/sh_jp/keymap.c diff --git a/keyboards/hhkb/keymaps/sh_jp/rules.mk b/keyboards/hhkb/jp/keymaps/sh_jp/rules.mk similarity index 100% rename from keyboards/hhkb/keymaps/sh_jp/rules.mk rename to keyboards/hhkb/jp/keymaps/sh_jp/rules.mk diff --git a/keyboards/hhkb/keymaps/via_jp/config.h b/keyboards/hhkb/jp/keymaps/via/config.h similarity index 100% rename from keyboards/hhkb/keymaps/via_jp/config.h rename to keyboards/hhkb/jp/keymaps/via/config.h diff --git a/keyboards/hhkb/keymaps/via_jp/keymap.c b/keyboards/hhkb/jp/keymaps/via/keymap.c similarity index 100% rename from keyboards/hhkb/keymaps/via_jp/keymap.c rename to keyboards/hhkb/jp/keymaps/via/keymap.c diff --git a/keyboards/hhkb/keymaps/via_jp/rules.mk b/keyboards/hhkb/jp/keymaps/via/rules.mk similarity index 100% rename from keyboards/hhkb/keymaps/via_jp/rules.mk rename to keyboards/hhkb/jp/keymaps/via/rules.mk diff --git a/keyboards/hhkb/jp/matrix.c b/keyboards/hhkb/jp/matrix.c new file mode 100644 index 000000000000..666b6f595f17 --- /dev/null +++ b/keyboards/hhkb/jp/matrix.c @@ -0,0 +1,215 @@ +/* +Copyright 2011 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include "print.h" +#include "debug.h" +#include "util.h" +#include "timer.h" +#include "matrix.h" +#include "hhkb_avr.h" +#include +#include "suspend.h" +#include "lufa.h" + + +// matrix power saving +#define MATRIX_POWER_SAVE 10000 +static uint32_t matrix_last_modified = 0; + +// matrix state buffer(1:on, 0:off) +static matrix_row_t *matrix; +static matrix_row_t *matrix_prev; +static matrix_row_t _matrix0[MATRIX_ROWS]; +static matrix_row_t _matrix1[MATRIX_ROWS]; + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ +#ifdef DEBUG + debug_enable = true; + debug_keyboard = true; +#endif + + KEY_INIT(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00; + for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00; + matrix = _matrix0; + matrix_prev = _matrix1; +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +uint8_t matrix_scan(void) +{ + uint8_t *tmp; + + tmp = matrix_prev; + matrix_prev = matrix; + matrix = tmp; + + // power on + if (!KEY_POWER_STATE()) KEY_POWER_ON(); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + KEY_SELECT(row, col); + _delay_us(5); + + // Not sure this is needed. This just emulates HHKB controller's behaviour. + if (matrix_prev[row] & (1< 20/(1000000/TIMER_RAW_FREQ)) { + matrix[row] = matrix_prev[row]; + } + + _delay_us(5); + KEY_PREV_OFF(); + KEY_UNABLE(); + + // NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE. + // This takes 25us or more to make sure KEY_STATE returns to idle state. +#ifdef HHKB_JP + // Looks like JP needs faster scan due to its twice larger matrix + // or it can drop keys in fast key typing + _delay_us(30); +#else + _delay_us(75); +#endif + } + if (matrix[row] ^ matrix_prev[row]) matrix_last_modified = timer_read32(); + } + // power off + if (KEY_POWER_STATE() && + (USB_DeviceState == DEVICE_STATE_Suspended || + USB_DeviceState == DEVICE_STATE_Unattached ) && + timer_elapsed32(matrix_last_modified) > MATRIX_POWER_SAVE) { + KEY_POWER_OFF(); + suspend_power_down(); + } + + matrix_scan_quantum(); + + return 1; +} + +bool matrix_is_modified(void) +{ + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + if (matrix[i] != matrix_prev[i]) + return true; + } + return false; +} + +inline +bool matrix_has_ghost(void) +{ + return false; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & (1<= 0; --r) { + count += bitpop16(matrix_get_row(r)); + } + return count; +} + +void matrix_power_up(void) { + KEY_POWER_ON(); +} +void matrix_power_down(void) { + KEY_POWER_OFF(); +} diff --git a/keyboards/hhkb/jp/readme.md b/keyboards/hhkb/jp/readme.md new file mode 100644 index 000000000000..57eb81439106 --- /dev/null +++ b/keyboards/hhkb/jp/readme.md @@ -0,0 +1,14 @@ +HHKB Alternate Controller +=== + +An alternative controler for the HHKB designed by hasu. + +Keyboard Maintainer: QMK Community +Hardware Supported: HHKB Alternate Controller +Hardware Availability: https://geekhack.org/index.php?topic=12047.0 + +Make example for this keyboard (after setting up your build environment): + + make hhkb:default + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/hhkb/jp/rn42/MEMO.txt b/keyboards/hhkb/jp/rn42/MEMO.txt new file mode 100644 index 000000000000..0ad56c79cf6f --- /dev/null +++ b/keyboards/hhkb/jp/rn42/MEMO.txt @@ -0,0 +1,262 @@ +Memo of deveopment +================== +just memo, NOT WORTH READING + +2015/11/24 +JP Bluetooth: + RN-42 cannot send Japanese keys like; henkan, mu-henkan and kana, JPY and RO. + It seems HID usage more than 0x65 cannot be send with the module. + http://shiki.esrille.com/2014/07/bluetoothnisse.html + + +Bug: +- Factory Reset PIO4 doesn't work + - the reason is unclear - 12/08 NOT LOOK INTO ANY MORE + - WORKAROUND: use serial pins(3.3V, GND, RX and TX) + - SF,1 and R,1 to set factory defalult + + +Todo: +- LED cover and switch knob and new Slide Switch +- RN42 auto configuration + - configure the module as HID device every time powering up + - this'll reduce work load of assembly + +- move rn42 to protocol directory when it becomes reusable stack + +- sendchar() in lufa.c no buffer + - no buffering. character lost can be caused. +- LUFA sendchar should be buffered and serial_uart.c buffur size is too large(256). + +- BT operations + - disconnect + - new connection + - remove connection + +- sendchar() in lufa.c block loop - DONE 11/29 + - block loop when powered with AC adapter + - FrameNumber is not updated when adapter powered + +Improving: +- ADC resolution + AVR120 + AVR32138 + - Enhancing ADC resolution by oversampling + AVR121 http://www.atmel.com/images/doc8003.pdf + - disable digital input buffer DIDR(7.8.6) + +Design: +- suspend.h - DONE 11/26 + - remove argument from suspend_power_down() for backward compatitibility +- remove MCU dependent power saving code from core/keyboard - DONE 11/23 + - it should be located in project matrix.c +- HHKB matrix.c needs matrix_prev? + - is_modified() is obsolete now. really needs? +- ADC: removing AREF capacitor C10 + - seems to be better while usb powered + - still bad while battery powered + http://electronics.stackexchange.com/questions/105849/avcc-and-capacitor-using-adc +- ADC: smaller resistors for voltage dividor + - 1K + 1K: not improved. - 11/27 + + +LUFA: +USB connection check: state of USB deivce +- USB_DeviceState: + USB_Deivce_State_t { Unattached, Powered, Default, Addressed, Configured*, Suspended* } + Unattached: unpluged + Powered: pluged with power adapter + Default: enumerate process bigin + Addressed: addressed + Configured: enumerated + Suspended: suspended + +- USB_IsInitialized: state of LUFA core setup + becomes true in USB_Init() USBController_AVR8.c + becomes false in USB_Disable() USBController_AVR8.c +- USB_VBUS_GetStatus(): state of VBUS(power/connection) +- USB_Disable() detaches, disables all interrupts, controller, PLL, regulater. + +- When connect to power adapter + - event happened: CW or CSW or C or DDC + - USB state: not configured + +- USB evnets + - USB connect: CSWRWRW + - USB connect but fail to enumeration: CWRWRWRWS + - USB disconnect: D + - Power adapter connect: CW, CSW, C + - Power adapter disconnect: D + + +Power saving: +- Pro2 current consumption + - active: 138.2mA(no device on Hub) + - suspended: 30.9mA(WakeUp enabled DIPSW6) + - suspended: 0mA->46.0mA(WakeUp disabled DIPSW6) +- Pro current consumption + - active: 54.0mA + - suspended: 40.5mA(WakeUp enabled DIPSW6) + - suspended: 0.3mA(WakeUp disabled DIPSW6) + +- RN42 3.3V + - disconnected(Idle): 5mA (config mode) + - connected(Active): + SW,0000: 23-26mA + SW,0010: 27-29mA worse than 0000 for unknown reason + SW,0020: 17-19mA mouse NG + SW,0030: 13-16mA laggy mouse NG + SW,0050: 10-13mA laggy mouse NG + +- matrix power saving + - power saving while externally powered and not while unpluged +- confirm suspend mode lufa.c: matrix_power_*, suspend_wakeup_condition +- 8MHz clock +- When not connected in a few minutes get into deep sleep to save battery life +- CTS is needed for waking up from deep sleep? How deep sleep is activated? +- firmware controlled 3.3V DC converter to switch on/off BT module +- sleep MCU and BT module(keyboard is not used) +- deep sleep MCU and BT module(keyboard is not used for long time) +- deep sleep MCU and turn off BT module(keyboard is not used and not connected) +- Battery ADC; switching, high resistance + - switching gnd end of divider with PF4 + - high resistor 100K/1M? + capacitor 10nF + http://www.eevblog.com/forum/beginners/measuring-battery-voltage-without-consuming-current/ +- During USB suspend change clock source to internal RC from external Xtal(6.8) +- FRZCLK: you can freeze clock for power saving. still WAKEUPI and VBUSTI interrupts are available while freezing.(21.7.3) +- Suspend: Clear Suspend Bit, Freeze clock, disable PLL, MCU sleep(21.13) +- Voltage reference(8.1.1) + - to reduce power consumption while power down mode +- unset ADEN before sleep(24.7) + + + + + + + +Lipo +---- +850mA lasts around 9 hours(07/28) + +Sparkfun Polymer Lithium Ion Battery 850mAh: +https://www.sparkfun.com/products/341 +Lipo Cell spec: +https://www.sparkfun.com/datasheets/Batteries/063048%20Li-polymer.pdf +Protection spec: +http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Prototyping/BatteryProtection.pdf + min typical max + over-charge 4.255 4.280 4.305 + over-charge discover? 4.030 4.080 4.130 + over-discharge 2.827 2.900 2.973 + over-discharge discover 3.022 3.100 3.178 + +ADC voltage monitor: voltage divider 10K+10K(0.5) + ADC=V*0.5/2.56*1024 + + V ADC + ------------------ + 4.20 0x347(839) + 3.10 0x26b(619) + + + + +TROUBLE SHOOT +------------- +07/16 After fix of voltage dividor on GPIO6, had a trouble that it could not send a char to BT module, though could receive. + Found R8 had wrong 1K resistor and changed to 10K, after that it can send to the module again. Not sure how it had sent with the wrong 1K before. + +07/18 On Linux, had an USB related trouble; keyboard or console didn't work for some reason. Changing PID cured this problem. Very annoying, took very long time before resolved it. + +12/07 rn42_rts() read 1 every time. R12 broke in open mode(no coductive), idk why, too much heat with soldering? and PF1 pin was not soldered. + It resolved with resoldering PF1 and new resistor on R12. + + + + +Done: +- low battery alert(solid light) 09/04 +- *** Rev.E BT test *** - DONE + - with MCP73832, new Schottky, tantalum caps - DONE 12/07 + * MCP73832 doesn't leak from Vcc pin when unpluged and battery powered + 34mV vs 2.07V(MCP73831) at Vcc pin + MCP73832 doesn't need revese protection diode D5 + * PMEG2010ER is very low VF while reverse current/voltage is high + VF=0.96 vs 1.98(RB160M-30TR)with Fluke 175 + Anode of D11 is 680mV vs 20mV(RB160M-30TR) + 780mV is still low < 1.4V VBUS plugin detection(21.11) + this doesn't cause false VBUS detect + and 780mV on MCP73832 Vcc pin is also no problem. + D5 can be removed. + - ADC divider switching - DONE 12/07 + * Drain and Source of Q4 Pch was reversed wrongly on Rev.E. + + - reverse current from Lipo charger - DONE 12/07 + * MCP73832 has no recverse current from Vcc pin unlike MCP73831 + + +- Rev.F design - DONE + - current measure point - DONE 12/08 + - change value of cap 68->47 - DONE 12/08 + - PPTC land pattern: no solder jumper, use 0Ohm resistor instead - CANCEL 12/08 + - Q4 Pch FET: wrong Drain and Source - DONE 12/08 + - D5 can be removed. - DONE 12/08 + + + +- BT_INDICATOR LED turns on wrongly when touching line or pin. -- pull-up enabled on PF6/GPIO2 08/30 +- Lipo charger configuration: fast charge time: USB charger spec? -- used 2kohm +- use LED of charger to alarm low battery. LED should be powered directly from Lipo? - cancel; powered from VUSB +- Use RTS in serial_uart.c to resolve missing chars from help message of RN-42 - done +- CTS/RTS lines are needed? just connect in loop back if no flow control is needed. - done +- add IO pin to charger status CHRG; LED control(low) and detect charge status(input HiZ) 07.24 +- LINKED: add trace on PIO2 to PF6 07.24 +- Lipo voltage ADC sensing +- Lipo charger MCP73831: needs capacitor 4.7uF *2 +- USB connection check - 07.01 +- BT on/off check: whether RX line is pulled up? - checking RTS 07.01 +- USB/BT switching BT is on -> BT, BT is off -> USB - 07.01 +- Under voltage lock out UVLO for protection of Lipo - Lipo has discharge protection at 3.100V 07.01 +- Power saving: HHKB scan, BT radio control - 9h with 850mAh, this is enough 07.01 +- Power selector doesn't work; Q4 MOSFET leaks from Lipo to USB power line. -- use Schottky instead 07/04 + +- wrongly suspended when powered from adapter without USB connection - DONE + - suspend event may occur when plug into adapter + - and never wake until conected to real USB line + - without debug print via USB no problem; CSW(wake just after suspend as real USB line) + - seems like USB print causes this problem after suspended + +- lose USB connection during power-down mode - DONE + - USB initialize code in main() causes this - WRONG + - Do not power-down during USB connection is active - DONE 11/11 + (USB_DeviceState == USB_DEVICE_Configured) is used to check USB connection + matrix_power_down() matrix.c - 11/23 + +- with Nexus5 keyboard and mouse are very laggy. + Not confirmed. 01/15 + +- switch BT host connections - CANCEL 01/15 + - switch next connection + cannot switch connection with version 6.15 at least + +- When given power only from wall wart adapter - DONE? not confirmed 01/15 + - it sleeps. it should not sleep + - Configured state without USB connection? + +- timer is slow while power down - DONE 11/26 + - time out interrupt is lost while power down? + - interrupt of watchdog timer compensates timer counter(avr/suspend.c) + +- repeated CHARGING/FULL_CHARGED - No longer problem 01/15 + - In LTC sharp pulses are observed. + - MCP has no pulse but still has a problem. + - needs more wait before read pin state? - NO + +- USB plug-in fails while BT - No longer problem 01/15 + - it ends in suspend state + - maybe, not responsive to host enumeration process due to power-down. + - matrix_power_down() only when state is unattached - 11/26 + - need to observe a while + diff --git a/keyboards/hhkb/jp/rn42/PowerSave.txt b/keyboards/hhkb/jp/rn42/PowerSave.txt new file mode 100644 index 000000000000..4b9c8f415d07 --- /dev/null +++ b/keyboards/hhkb/jp/rn42/PowerSave.txt @@ -0,0 +1,88 @@ +Power Saving +============ + + +MCU+HHKB Power Comsumption +-------------------------- +Battery drive: + idle 18.9mA + active 35.8mA + +USB powered: + 40.0mA + 52mA 01/17 + +Other keyboards: +HHKB Pro 55mA +HHKB Pro2 140mA +HHKB Pro 42mA(Alt) +HHKB Pro2 52mA(Alt BT controller USB mode) +HHKB Pro2 88mA(Alt BT controller BT mode connected) +HHKB Pro2 68mA(Alt BT controller BT mode config mode) +Poker X 6mA +Infinity 24mA(TMK) + 65mA(kiibohd) + + +HHKB key switch power control +----------------------------- +MOS FET Nch: BSS138 or IRLML6344T, either works and no apparent difference. +Normally on(pull-up) or off(pull-down)? interms of power saving it prefers pull-down? + +Pull-down will be better for power saving, normally off. + + + +Used Timer +---------- + +8MHz clock +---------- +1) 16MHz xtal with system prescaler div2: F_CPU=8MHz, F_USB=16MHz +2) 8MHz xtal with div1: F_CPU=8MHz, F_USB=8MHz +Hardware USART doesn't work at 115200bps with 8MHz(F_CPU). + +workaround: +a) use Sotwre serial for communcation with RN-42 +b) reduce baud of RN-42 to lower rate;(factory default is 115200bps) +10/03 + + + +Slave mode +---------- +Discovery/Inquire +Connect/Page + +SI,0012 +SJ,0012 +InqWindw=0100 +PagWindw=0100 + + +Sniff mode +---------- +0.625ms * +SW,0320 Very sluggish. Type is not lost but very slow to register. +SW,0160 Still sluggish. may transposed? can type but ... + Mouse point move intermittently +SW,0020 feel a bit late like stumble(20ms) +SW,0010 feel no latency(10ms) + + +Deep sleep +---------- +SW,8010 + + +TX power +-------- +SY,fff4 + + +IO pins +------- +S%,1000 status led and connection control don't work + GPIO5: status LED + GPIO6: Connection control + GPIO2: linked status diff --git a/keyboards/hhkb/jp/rn42/RN42.txt b/keyboards/hhkb/jp/rn42/RN42.txt new file mode 100644 index 000000000000..b30a0327d4aa --- /dev/null +++ b/keyboards/hhkb/jp/rn42/RN42.txt @@ -0,0 +1,408 @@ +RN-42 Bluetooth Module Support +============================== +Bluetooth controller board works with HHKB Pro2, JP, Type-S and Type-S JP and it supports both USB and Bluetooth as keyboard output protocol. Bluetooth module Roving Networks/Microchip RN-42 is installed on the board. + + +RN-42: +http://www.microchip.com/wwwproducts/Devices.aspx?product=RN42 + + +Capabitlities: +- USB keyboard functions + completely equivarent to USB controller including mouse keys and NKRO. +- Switching between USB and Bluetooth + You can switch the two connections with BT switch or key combination. +- RN-42 config mode + You can change power/connection configuration of the module if needed. +- Low battery alert + Red LED turns on when low voltage. +- RN-42 status indicator + LED indicates status of Bluetooth connection. +- Pairing + The module stores up to 8 connections. +- Auto connect + The module connects the last connected device automatically. +- iOS support + works as keyboard with iPhone5. No tested completely. +- Android support + works as keyboard and mouse with Nexus5. No tested completely. +- Mouse keys over BT + Note that iOS doesn't accept mouse device. + + +Limitations: +- Short battery life + Around 12hr with 1000mAh +- No connection switching + RN-42 auto-connects to the last connected device. + Some of consumer products can switch between devices, for example Logitech K480. + http://www.logitech.com/en-us/product/multi-device-keyboard-k480?crid=26 +- HHKB JP requires case modification for BT switch and LEDs. + without switch power controlled by MCU? Probably using 3.3V regulator enable pin power of RN-42 can be controlled. + +NOTE: +- LIPO BATTERY IS VERY DANGEROUS, TAKE EXTRA CARE OF YOUR SAFETY AND PROPERTY. +- RN-42 version 6.15 is supported. +- No NKRO over Bluetooth +- Check you country's wiress regulation and certification of RN-42. + +Bugs: + +Todos: + + +Lipo Battery +------------ +You can use 3.7V Lithium Ion battery with JST PH 2pin connector and protection circuit. +Battery space inside HHKB is around 54mm x 50mm and its height is 7mm. + +Sparkfun 850mAh +https://www.sparkfun.com/products/341 +Sparkfun 1000mAh +https://www.sparkfun.com/products/339 + +Sparkfun 2000mAh battery won't fit due to its size. + +Learn about Lipo battery: +https://learn.adafruit.com/li-ion-and-lipoly-batteries + + + + + +LED Status +---------- +Configuring 10 times per sec +Startup/configuration timer 2 times per sec +Discoverable/Inquiring/Idle once per sec +Connected solid on + + +RN-42 Magic Command +-------------------- +Magic key combination is 'LShift+RShift' by default in case of HHKB. + +Here is help. + + ----- Bluetooth RN-42 Help ----- + i: RN-42 info + b: battery voltage + Del: enter/exit RN-42 config mode + Slck: RN-42 initialize + p: pairing + u: toggle Force USB mode + + RN-42 info: displays information of the module on console. + battery voltage: displays current voltage of battery and uptime. + RN-42 initialize: does factory reset and configures RN-42 + pairing: enters Pairing mode. + toggle Force USB mode: switch between USB and Bluetooth + + +RN-42 Config mode +----------------- +You can tune/operate RN-42 yourself with config(command) mode. + +1. hook up USB cable +2. run `hid_listen` command in console +3. turn on Bluetooth switch +4. press LShift+RShift+Delete(Fn+~) you will see output like followings: + + Entering config mode ... + CMD + v + Ver 6.15 04/26/2013 + (c) Roving Networks + +5. do config with RN-42 commands. See documentations of RN-42. +6. to exit also press LShift+RShift+Delete(Fn+~) + + Exiting config mode ... + --- + END + + +RN-42 Initial Configuration +--------------------------- +RN-42 is configured as SPP device at factory reset, you need to configure it as HID device. This is needed just once first time. + +1. hook up USB cable +2. run `hid_listen` command in console +3. turn on Bluetooth switch +4. press LShift+RShift+ScrLk(Fn+O) you will see output like followings: + + Entering config mode ... + CMD + Ver 6.15 04/26/2013 + (c) Roving Networks + ECHO ON + SF,1 + AOK + S-,TmkBT + AOK + SS,Keyboard/Mouse + AOK + SM,4 + AOK + SW,8000 + AOK + S~,6 + AOK + SH,003C + AOK + SY,FFF4 + AOK + R,1 + Reboot! + Exiting config mode ... + +5. output of command 'X' after cofiguration + + Ver 6.15 04/26/2013 + (c) Roving Networks + ***Settings*** + BTA=00066667BBE9 + BTName=TmkBT-BBE9 + Baudrt(SW4)=115K + Mode =DTR + Authen=1 + PinCod=1234 + Bonded=0 + Rem=NONE SET + ***ADVANCED Settings*** + SrvName= Keyboard/Mouse + SrvClass=0000 + DevClass=1F00 + InqWindw=0100 + PagWindw=0100 + CfgTimer=255 + StatuStr=NULL + HidFlags=3c + DTRtimer=8 + KeySwapr=0 + ***OTHER Settings*** + Profile= HID + CfgChar= $ + SniffEna=8000 + LowPower=0 + TX Power=fff4 + IOPorts= 0 + IOValues=0 + Sleeptmr=0 + DebugMod=0 + RoleSwch=0 + + +Switch to USB mode +------------------ +You can switch between USB and Bluetooth with pressing 'LShift+RShift+u'. + + +Pairing mode +------------ +This disconnects current connect and enter pairing mode. + + + + +For deveropment +=============== + +RN-42 Serial Connection +----------------------- +UART: 115200bps, 8bit, 1-stopbit, non-parity, no flow control +SSP: 115200bps, 8bit, 1-stopbit, non-parity, no flow control(via Bluetooth) + +To enter command mode disconnect the module from host and type '$$$'.(you will see 'CMD') and type '+' to get local echo. To exit type '---'(you will see 'END'). + + +RN-42 Commands +-------------- +S-,tmkBT // Device name +SS,keyboard/mouse // service name +SM,4 // Auto Connect DTR mode +SW,8010 // Sniff enable 0x10*0.625ms=10ms; 50ms is laggish and not much power save +S~,6 // HID profile +S~,0 // SPP profile +SH,003C // HID register +SY,0004 // Transmit power +SC,0000 // COD: 000005C0 (see HID spec/Bluegiga doc) +SD,05C0 // bit 12-8 7 6 5-0 + // 00101 1 1 0 + // peripheral pointing keybaord joystick, gamepad, ... +SM,6 // Pairing mode: auto connect +SM,4 // Master mode: Connection can be controled with GPIO6 +SF,1 // Factroy reset +R,1 // reboot +SR,Z // removes all remote addresses for reconnecting. + // can be used to connect another host +SR,I // registers last inquiry address + + +Operation Modes +--------------- +SM,3 Auto Connect Master mode +SM,4 Auto Connect DTR Mode uses GPIO6 to make and break connection(Mode =DTR) + confirm: auto connect works and control connection with GPIO6 +SM,5 Auto Connect ANY Mode (Mode =ANY) + each time GPIO is set, make inquiry and connect to the first found device +SM,6 automatically reconnect(Mode =Pair) + confirm: auto connect works well but difficult to enter command mode. + + +HID flag register +----------------- +SH,0200 +GH + +10 0000 0000(0200) default +00 0011 1000(0038) Combo +|| | | |\_\____ number of paired devices to which the module can reconnect +|| | | \_______ send out reports over UART (0xFF ) +|| \__\_________ descriptor type +|\______________ toggle virtual keyboard on iOS when first connected +\_______________ Force HID mode if GPIO11 is high on power-up + + Descriptor type: + 0000: keybaord + 0001: Game Pad + 0010: Mouse + 0011: Combo + 0100: Joystick + 1xxx: reserved + + +Out report - Indicator +---------------------- +0xFE 0x02 0x01 + + +Apple iOS +--------- +Keyboard can be used with iPhone, but mouse cannot. + + +Android +------- +3.7.1.5 Note: To connect with Android phone the modules must wake up 11ms every 2.5seconds. + + +Power Management +---------------- +Inquiry and Page window Idle or Active (3.1.1) + Downside: delay in discovery or connection time + SI, // set inquiry scan window(discovery) on/off duty? + SJ, // set page scan window(connection) + This reduces averaege power >20mA to 5mA(3mA in Sniff mode) + +Sniff mode Transmit + Sniff mode is disabled by default and radio is active continuously when connected.(25-30mA) + In Sniff mode the radio wakes up intermittently and sleeps in very low power mode.(2mA) + SW, // set interval timer(*0.625ms) 0000-7FFF + +Deep sleep Idle (3.1.2) + In this mode the module shuts down completly and only draws about 300uA. To enable this set the most signifant bit(0x8000) of Sniff interaval timer. + SW,8320 // deep sleep enable(interval=0x320*0.625=500ms) + In normal sleep the firmware is still running in idle mode, and wakes up about 20 times per second to check ports, update LEDs, etc. During deep sleep, the firmware actually stops runnig some tasks and the LEDs only update about once per second. + To wake from deep sleep there are three ways: (in worst case wake up takes 5ms) + *send a charactor to the UART(first charactor will be lost) + *toggle CTS low to high and wait 5ms + *wake automatically every slot time(*0.625ms) + Once the radio is awake it stay active for exactly 1 second of inactivity and then sleeps again. + Downside: latency and data loss + +Disable Output driver Idle or Active (3.1.3) + S%,1000 // set all GPIO pins(0-11) to inputs. + +Lower Transmit Power Idle or Active (3.1.4) + SY, // transmit power setting(takes effect after a power cycle and reboot) + Downside: reducing effective range + + +Optimizig for Latency +--------------------- +By default the firmware is optimized for throughput. +SQ,16 // set latency bit +SQ,0 // unset latency bit + + +Configuration timer settings +---------------------------- +Remote configuration is used for the module to be configured with various commands over Bluetooth(SPP profile only?). + +The module has remote configuration timer to allow remote configuration over Bluetooth after power up in Slave mode. In Master modes the remote configuration timer is set to 0(no remote configuration). (In Trigger Master mode the timer is used as an idle timer to break the connection after time expires with no charactors receive.) + ST,0 // no remote, no local when connected + ST,<1-252> // local and remote with timeout in seconds from power up + ST,253 // local only without timeout + ST,254 // remote only without timeout + ST,255 // local and remote without timeout + + +Commands +-------- +S7, 7bit mode +SA, Authenticaiton +SB, Send break +SC, Service class +SD, Device class +SM, Operation mode +SP, Pin code(alpahnumeric) +SQ, Special configuration(GPIO, discovery mode, low latency, reboot, UART) +SR, Store remote address +SR,Z Erase all address +SS, Set service name(1-20)** +ST, Remote configuration timer(Master:0, Slave:0-255, Triger:as idle timer) +SU, UART baud rate +SW, low-power sniff mode** deep sleep and wake up every 625us * +SX,<0|1> bonding enable only acceps device that matches the stored address +SY, power setting** +SZ, non-standard raw baud rate =baud*0.004096 +S~, Profile 0:SPP, 5:APL, 6:HID +S-, Device name -15 alphanumeric charactors +S?,<0|1> role switch enable +S$, command mode char +$|, low-power connect mode deep sleep/active(discoverable and connectable) cycle +D display basic setting +E display extended setting +GB display the device's Bluetooth address +GF display Bluetooth address of connected device +GK show connection status +GR show remote address for reconnecting +G& show GPIO pin +G show stored setting ++ toggle local echo on/off +& show GPIO 3,4,6,7(DIP switch) +C connect to stored remote address +C,
connect last address +CFI connect and go into fast data mode +CFR connect and go into fast data mode +CT,
, connect to the address and disconnect after val? +F,1 fast data mod: +H display help +I,