Skip to content

Latest commit

 

History

History
121 lines (98 loc) · 6.46 KB

ds-video-device_L3_Low-Level_TestSpecification.md

File metadata and controls

121 lines (98 loc) · 6.46 KB

Device Settings Video Device L3 Low Level Test Specification and Procedure Documentation

Table of Contents

Overview

This document describes the L3 Low Level Test Specification and Procedure Documentation for the Device Settings Video Device module.

Acronyms, Terms and Abbreviations

  • HAL - Hardware Abstraction Layer, may include some common components
  • DFC - Decoder Format Conversion
  • OEM - Original Equipment Manufacture
  • SoC - System on a Chip
  • L3 - Level 3 Testing
  • DS - Device Settings
  • HDR - High Dynamic Range
  • FPS - Frames Per Second.
  • FRF - Frame Rate Frequency
  • HEVC - High Efficiency Video Coding
  • RAFT - Rapid Automation Framework for Testing
  • DUT - Device Under Test
  • NA - Not Applicable
  • Y - Yes

References

Video Streams Requirement

# Streams Name Streams description
1 scrolling_text_fast_3840x2160_23.98fps.mp4 Resolution: 3840x2160, Framerate Per Second: 23.98
2 scrolling_text_fast_3840x2160_24fps.mp4 Resolution: 3840x2160, Framerate Per Second: 24
3 scrolling_text_fast_3840x2160_25fps.mp4 Resolution: 3840x2160, Framerate Per Second: 25
4 scrolling_text_fast_3840x2160_29.97fps.mp4 Resolution: 3840x2160, Framerate Per Second: 29.97
5 scrolling_text_fast_3840x2160_30fps.mp4 Resolution: 3840x2160, Framerate Per Second: 30
6 scrolling_text_fast_3840x2160_50fps.mp4 Resolution: 3840x2160, Framerate Per Second: 50
7 scrolling_text_fast_3840x2160_59.94fps.mp4 Resolution: 3840x2160, Framerate Per Second: 59.94
8 scrolling_text_fast_3840x2160_60fps.mp4 Resolution: 3840x2160, Framerate Per Second: 60
9 scrolling_text_fast_1920x1080_60fps.mp4 Resolution: 1920x1080, Framerate Per Second: 60

Level 3 Test Cases High Level Overview

Below are top test use-case for the Video Display.

# Test-case Description HAL APIs Source Sink Streams Number
1 Verify the Video Display framerate change with pre and post change callback. Set the auto framerate mode and check the callback is triggered before and after when the framerate of a display changes dsRegisterFrameratePreChangeCB(), dsRegisterFrameratePostChangeCB() NA Y 1,2,3,4,5,6,7,8
2 Set and verify the Zoom mode of the source device Play any video content and Set the supported Zoom mode and verify the selected Zoom mode dsSetDFC(), dsGetDFC() Y NA 9
3 Select the Device Frame Rate of Sink device Select the Device Frame Rate of Sink device and on playing video playback verify dsSetDisplayframerate() dsSetDisplayframerate() NA Y 1,2,3,4,5,6,7,8
4 Set and verify the FRF mode Select theFRFmode and verify the selected FRF mode with video playback dsSetFRFMode() NA Y 1,2,3,4,5,6,7,8

Level 3 Python Test Cases High Level Overview

The class diagram below illustrates the flow of dsVideoDevice L3 Python test cases:

---
title: dsVideoDevice - Python Class Flow
---
classDiagram
    testControl <|-- ut_raft : inherits
    class ut_raft{
    }
    ut_raft <|-- dsVideoDeviceHelperClass : inherits
    dsVideoDeviceHelperClass <|-- L3_TestClasses : inherits
    L3_TestClasses ..> dsVideoDevice : uses
    note for testControl "uses rackConfig.yaml and deviceConfig.yaml"
    note for dsVideoDevice "uses platformProfile.yaml"
    note for L3_TestClasses "uses testSetupConfig.yaml"
    note for ut_raft "suite Navigator uses testConfig.yaml"
Loading
  • testControl
    • Test Control Module for running rack Testing. This module configures the DUT based on the rack configuration file provided to the test.
    • This class is defined in RAFT framework. For more details refer RAFT
  • ut_raft
    • Python based testing framework for writing engineering tests.
    • It provides common functionalities like menu navigation, configuration reader, reading user response etc.
    • For more details ut-raft.
  • dsVideoDevice
    • This is test helper class which communicates with the L3 C/C++ test running on the DUT through menu
  • L3_TestClasses
    • These are the L3 test case classes
    • Each class covers the each test use-case defined in L3 Test use-cases table

YAML File Inputs

  • rackConfig.yaml

    • Identifies the rack configuration and platform used
    • References platform-specific config from deviceConfig.yaml
    • For more details refer RAFT and example_rack_config.yml

  • deviceConfig.yaml

    • Specifies overall configuration for the platform
    • Can be overridden by:
      • Changing locally .yaml file directory
      • Using --deviceConfig command line switch
    • For more details refer RAFT and example_device_config.yml

  • componentProfile.yaml/platformProfile.yaml

    • Contains component-specific configurations
    • Contains platform wide configuration broken down into separate components
    • Example configuration file dsVideoDevice_Settings

  • testSetupConfig.yaml

    • This configuration file contains the list of requirements for tests to execute. Eg: Copying the streams, setting environment variables etc.
    • Example configuration file dsVideoDevice_L3_testSetup.yml

  • testConfig.yaml

    • This configuration file contains the list of menu items for C/C++ L3 test running on DUT
    • Example configuration file dsVideoDevice_testConfig.yml