wxpython installation not working #1364
Comments
|
I also reported the problem in wxpython: wxWidgets/Phoenix#465 |
|
Nobody answered to this one... it looks travis community not so active as wx one... |
|
@Thimxx You may consider to report the bug to travis-ci/travis-ci. We may report it to a wrong place. Thanks. |
|
@kuanglei thanks for the hint, did not notice, however was fixed by wxpython guys |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
When trying to install wxpython following instructions in travis, it fails in the installation, essentially the following execution fails:
pip install -U wxpythonThis is the error output I am getting:
$ pip install -U wxpython
Collecting wxpython
Downloading wxPython-4.0.0b1.tar.gz (50.6MB)
Requirement already up-to-date: six in /home/travis/virtualenv/python3.6.2/lib/python3.6/site-packages (from wxpython)
Building wheels for collected packages: wxpython
Running setup.py bdist_wheel for wxpython: started
Running setup.py bdist_wheel for wxpython: finished with status 'error'
Complete output from command /home/travis/virtualenv/python3.6.2/bin/python -u -c "import setuptools, tokenize;file='/tmp/pip-build-2evi4tjt/wxpython/setup.py';f=getattr(tokenize, 'open', open)(file);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, file, 'exec'))" bdist_wheel -d /tmp/tmp98rhij4_pip-wheel- --python-tag cp36:
running bdist_wheel
running build
WARNING: Building this way assumes that all generated files have been
generated already. If that is not the case then use build.py directly
to generate the source and perform the build stage. You can use
--skip-build with the bdist_* or install commands to avoid this
message and the wxWidgets and Phoenix build steps in the future.
"/home/travis/virtualenv/python3.6.2/bin/python" -u build.py build
Will build using: "/home/travis/virtualenv/python3.6.2/bin/python"
3.6.2 (default, Jul 17 2017, 15:25:33)
[GCC 4.8.4]
Python's architecture is 64bit
cfg.VERSION: 4.0.0b1
Running command: build
Running command: build_wx
wxWidgets build options: ['--wxpython', '--unicode']
Configure options: ['--enable-unicode', '--with-opengl', '--enable-sound', '--enable-graphics_ctx', '--enable-mediactrl', '--enable-display', '--enable-geometry', '--enable-debug_flag', '--enable-optimise', '--disable-debugreport', '--enable-uiactionsim', '--with-sdl']
/tmp/pip-build-2evi4tjt/wxpython/ext/wxWidgets/configure --enable-unicode --with-opengl --enable-sound --enable-graphics_ctx --enable-mediactrl --enable-display --enable-geometry --enable-debug_flag --enable-optimise --disable-debugreport --enable-uiactionsim --with-sdl
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for --disable-gui... no
checking for --enable-monolithic... no
checking for --enable-plugins... no
checking for --without-subdirs... no
checking for --enable-official_build... no
checking for --disable-all-features... no
checking for --enable-universal... no
checking for --enable-nanox... no
checking for --enable-gpe... no
checking for toolkit... gtk
checking for --with-libpng... yes
checking for --with-libjpeg... yes
checking for --with-libtiff... yes
checking for --without-libjbig... no
checking for --without-liblzma... no
checking for --with-libxpm... yes
checking for --with-libiconv... yes
checking for --with-libmspack... no
checking for --without-gtkprint... no
checking for --with-gnomevfs... no
checking for --with-libnotify... yes
checking for --with-hildon... no
checking for --with-opengl... yes
checking for --with-dmalloc... no
checking for --with-sdl... yes
checking for --with-regex... yes
checking for --with-zlib... yes
checking for --with-expat... yes
checking for --with-macosx-sdk...
checking for --with-macosx-version-min...
checking for --enable-debug... default
checking for --disable-debug_flag... no
checking for --enable-debug_info... no
checking for --enable-debug_gdb... no
checking for --enable-debug_cntxt... no
checking for --enable-mem_tracing... no
checking for --disable-shared... no
checking for --enable-stl... no
checking for --enable-std_containers... no
checking for --enable-std_iostreams... yes
checking for --enable-std_string... yes
checking for --enable-std_string_conv_in_wxstring... no
checking for --disable-unicode... no
checking for --enable-mslu... no
checking for --enable-utf8... no
checking for --enable-utf8only... no
checking for --enable-extended_rtti... no
checking for --disable-optimise... no
checking for --enable-profile... no
checking for --enable-no_rtti... no
checking for --enable-no_exceptions... no
checking for --enable-permissive... no
checking for --enable-no_deps... no
checking for --disable-vararg_macros... no
checking for --enable-universal_binary... no
checking for --enable-macosx_arch... no
checking for --enable-compat26... no
checking for --disable-compat28... no
checking for --disable-rpath... no
checking for --enable-objc_uniquifying... no
checking for --disable-visibility... no
checking for --disable-tls... no
checking for --enable-intl... yes
checking for --enable-xlocale... yes
checking for --enable-config... yes
checking for --enable-protocols... yes
checking for --enable-ftp... yes
checking for --enable-http... yes
checking for --enable-fileproto... yes
checking for --enable-sockets... yes
checking for --enable-ipv6... no
checking for --enable-ole... yes
checking for --enable-dataobj... yes
checking for --enable-ipc... yes
checking for --enable-baseevtloop... yes
checking for --enable-epollloop... yes
checking for --enable-selectloop... yes
checking for --enable-any... yes
checking for --enable-apple_ieee... yes
checking for --enable-arcstream... yes
checking for --enable-base64... yes
checking for --enable-backtrace... yes
checking for --enable-catch_segvs... yes
checking for --enable-cmdline... yes
checking for --enable-datetime... yes
checking for --enable-debugreport... no
checking for --enable-dialupman... yes
checking for --enable-dynlib... yes
checking for --enable-dynamicloader... yes
checking for --enable-exceptions... yes
checking for --enable-ffile... yes
checking for --enable-file... yes
checking for --enable-filehistory... yes
checking for --enable-filesystem... yes
checking for --enable-fontenum... yes
checking for --enable-fontmap... yes
checking for --enable-fs_archive... yes
checking for --enable-fs_inet... yes
checking for --enable-fs_zip... yes
checking for --enable-fsvolume... yes
checking for --enable-fswatcher... yes
checking for --enable-geometry... yes
checking for --enable-log... yes
checking for --enable-longlong... yes
checking for --enable-mimetype... yes
checking for --enable-printfposparam... yes
checking for --enable-snglinst... yes
checking for --enable-sound... yes
checking for --enable-stdpaths... yes
checking for --enable-stopwatch... yes
checking for --enable-streams... yes
checking for --enable-sysoptions... yes
checking for --enable-tarstream... yes
checking for --enable-textbuf... yes
checking for --enable-textfile... yes
checking for --enable-timer... yes
checking for --enable-variant... yes
checking for --enable-zipstream... yes
checking for --enable-url... yes
checking for --enable-protocol... yes
checking for --enable-protocol_http... yes
checking for --enable-protocol_ftp... yes
checking for --enable-protocol_file... yes
checking for --enable-threads... yes
checking for --enable-iniconf... no
checking for --enable-regkey... yes
checking for --enable-docview... yes
checking for --enable-help... yes
checking for --enable-mshtmlhelp... yes
checking for --enable-html... yes
checking for --enable-htmlhelp... yes
checking for --enable-xrc... yes
checking for --enable-aui... yes
checking for --enable-propgrid... yes
checking for --enable-ribbon... yes
checking for --enable-stc... yes
checking for --enable-constraints... yes
checking for --enable-loggui... yes
checking for --enable-logwin... yes
checking for --enable-logdialog... yes
checking for --enable-mdi... yes
checking for --enable-mdidoc... yes
checking for --enable-mediactrl... yes
checking for --enable-gstreamer8... no
checking for --enable-richtext... yes
checking for --enable-postscript... yes
checking for --enable-printarch... yes
checking for --enable-svg... yes
checking for --enable-webkit... yes
checking for --enable-webview... yes
checking for --enable-graphics_ctx... yes
checking for --enable-clipboard... yes
checking for --enable-dnd... yes
checking for --disable-controls... no
checking for --enable-markup... yes
checking for --enable-accel... yes
checking for --enable-animatectrl... yes
checking for --enable-bannerwindow... yes
checking for --enable-artstd... yes
checking for --enable-arttango... auto
checking for --enable-bmpbutton... yes
checking for --enable-bmpcombobox... yes
checking for --enable-button... yes
checking for --enable-calendar... yes
checking for --enable-caret... yes
checking for --enable-checkbox... yes
checking for --enable-checklst... yes
checking for --enable-choice... yes
checking for --enable-choicebook... yes
checking for --enable-collpane... yes
checking for --enable-colourpicker... yes
checking for --enable-combobox... yes
checking for --enable-comboctrl... yes
checking for --enable-commandlinkbutton... yes
checking for --enable-dataviewctrl... yes
checking for --enable-datepick... yes
checking for --enable-detect_sm... yes
checking for --enable-dirpicker... yes
checking for --enable-display... yes
checking for --enable-editablebox... yes
checking for --enable-filectrl... yes
checking for --enable-filepicker... yes
checking for --enable-fontpicker... yes
checking for --enable-gauge... yes
checking for --enable-grid... yes
checking for --enable-headerctrl... yes
checking for --enable-hyperlink... yes
checking for --enable-imaglist... yes
checking for --enable-infobar... yes
checking for --enable-listbook... yes
checking for --enable-listbox... yes
checking for --enable-listctrl... yes
checking for --enable-notebook... yes
checking for --enable-notifmsg... yes
checking for --enable-odcombobox... yes
checking for --enable-popupwin... yes
checking for --enable-prefseditor... yes
checking for --enable-radiobox... yes
checking for --enable-radiobtn... yes
checking for --enable-richmsgdlg... yes
checking for --enable-richtooltip... yes
checking for --enable-rearrangectrl... yes
checking for --enable-sash... yes
checking for --enable-scrollbar... yes
checking for --enable-searchctrl... yes
checking for --enable-slider... yes
checking for --enable-spinbtn... yes
checking for --enable-spinctrl... yes
checking for --enable-splitter... yes
checking for --enable-statbmp... yes
checking for --enable-statbox... yes
checking for --enable-statline... yes
checking for --enable-stattext... yes
checking for --enable-statusbar... yes
checking for --enable-taskbaricon... yes
checking for --enable-tbarnative... yes
checking for --enable-textctrl... yes
checking for --enable-datepick... yes
checking for --enable-tipwindow... yes
checking for --enable-togglebtn... yes
checking for --enable-toolbar... yes
checking for --enable-toolbook... yes
checking for --enable-treebook... yes
checking for --enable-treectrl... yes
checking for --enable-treelist... yes
checking for --enable-commondlg... yes
checking for --enable-aboutdlg... yes
checking for --enable-choicedlg... yes
checking for --enable-coldlg... yes
checking for --enable-filedlg... yes
checking for --enable-finddlg... yes
checking for --enable-fontdlg... yes
checking for --enable-dirdlg... yes
checking for --enable-msgdlg... yes
checking for --enable-numberdlg... yes
checking for --enable-splash... yes
checking for --enable-textdlg... yes
checking for --enable-tipdlg... yes
checking for --enable-progressdlg... yes
checking for --enable-wizarddlg... yes
checking for --enable-menus... yes
checking for --enable-miniframe... yes
checking for --enable-tooltips... yes
checking for --enable-splines... yes
checking for --enable-mousewheel... yes
checking for --enable-validators... yes
checking for --enable-busyinfo... yes
checking for --enable-hotkey... auto
checking for --enable-joystick... yes
checking for --enable-metafile... auto
checking for --enable-dragimage... yes
checking for --enable-accessibility... no
checking for --enable-uiactionsim... yes
checking for --enable-dctransform... yes
checking for --enable-webviewwebkit... yes
checking for --enable-palette... yes
checking for --enable-image... yes
checking for --enable-gif... yes
checking for --enable-pcx... yes
checking for --enable-tga... yes
checking for --enable-iff... yes
checking for --enable-pnm... yes
checking for --enable-xpm... yes
checking for --enable-ico_cur... yes
checking for --enable-dccache... yes
checking for --enable-ps-in-msw... yes
checking for --enable-ownerdrawn... yes
checking for --enable-uxtheme... yes
checking for --enable-wxdib... yes
checking for --enable-webviewie... yes
checking for --enable-autoidman... no
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether we are using the Intel C compiler... no
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking whether gcc needs -traditional... no
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether we are using the Intel C++ compiler... no
checking whether we are using the Sun C++ compiler... no
checking for ar... ar
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for langinfo.h... yes
checking for wchar.h... yes
checking for sys/select.h... yes
checking for cxxabi.h... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking size of short... 2
checking size of void *... 8
checking size of int... 4
checking size of long... 8
checking size of size_t... 8
checking size of long long... 8
checking size of wchar_t... 4
checking for va_copy... yes
checking whether the compiler supports variadic macros... yes
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking if large file support is available... yes
checking for _LARGEFILE_SOURCE value needed for large files... no
checking whether byte ordering is bigendian... no
checking for iostream... yes
checking if C++ compiler supports the explicit keyword... yes
checking for std::wstring in ... yes
checking for std::istream... yes
checking for std::ostream... yes
checking how to run the C++ preprocessor... g++ -E
checking type_traits usability... no
checking type_traits presence... no
checking for type_traits... no
checking tr1/type_traits usability... yes
checking tr1/type_traits presence... yes
checking for tr1/type_traits... yes
checking for __sync_fetch_and_add and __sync_sub_and_fetch builtins... yes
checking for libraries directories... /usr/lib/x86_64-linux-gnu /usr/lib
checking for cos... no
checking for floor... no
checking if floating point functions link without -lm... no
checking for sin... yes
checking for ceil... yes
checking if floating point functions link with -lm... yes
checking for strtoull... yes
configure: WARNING: Defaulting to the builtin regex library for Unicode build.
checking for zlib.h >= 1.1.4... yes
checking for zlib.h... (cached) yes
checking for deflate in -lz... yes
checking for png.h > 0.90... yes
checking for png.h... (cached) yes
checking for png_sig_cmp in -lpng... yes
checking for jpeglib.h... yes
checking for jpeg_read_header in -ljpeg... yes
checking for tiffio.h... yes
checking for TIFFError in -ltiff... yes
checking for expat.h... yes
checking if expat.h is valid C++ header... yes
checking for XML_ParserCreate in -lexpat... yes
checking for GTK+ version...
checking for pkg-config... /usr/bin/pkg-config
checking for GTK+ - version >= 2.6.0... no
*** Could not run GTK+ test program, checking why...
*** The test program failed to compile or link. See the file config.log for the
*** exact error that occurred. This usually means GTK+ is incorrectly installed.
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for GTK+ - version >= 3.0.0... no
*** Could not run GTK+ test program, checking why...
*** The test program failed to compile or link. See the file config.log for the
*** exact error that occured. This usually means GTK+ is incorrectly installed.
checking for gtk-config... no
checking for GTK - version >= 1.2.7... no
*** The gtk-config script installed by GTK could not be found
*** If GTK was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the GTK_CONFIG environment variable to the
*** full path to gtk-config.
checking for gtk-config... (cached) no
checking for GTK - version >= 1.2.3... no
*** The gtk-config script installed by GTK could not be found
*** If GTK was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the GTK_CONFIG environment variable to the
*** full path to gtk-config.
configure: error:
The development files for GTK+ were not found. For GTK+ 2, please
ensure that pkg-config is in the path and that gtk+-2.0.pc is
installed. For GTK+ 1.2 please check that gtk-config is in the path,
and that the version is 1.2.3 or above. Also check that the
libraries returned by 'pkg-config gtk+-2.0 --libs' or 'gtk-config
--libs' are in the LD_LIBRARY_PATH or equivalent.
Error running configure
ERROR: failed building wxWidgets
Traceback (most recent call last):
File "build.py", line 1259, in cmd_build_wx
wxbuild.main(wxDir(), build_options)
File "/tmp/pip-build-2evi4tjt/wxpython/buildtools/build_wxwidgets.py", line 368, in main
"Error running configure")
File "/tmp/pip-build-2evi4tjt/wxpython/buildtools/build_wxwidgets.py", line 85, in exitIfError
raise builder.BuildError(msg)
buildtools.builder.BuildError: Error running configure
Finished command: build_wx (0m12.721s)
Finished command: build (0m12.721s)
Command '"/home/travis/virtualenv/python3.6.2/bin/python" -u build.py build' failed with exit code 1.
Failed building wheel for wxpython
Running setup.py clean for wxpython
Failed to build wxpython
Installing collected packages: wxpython
Running setup.py install for wxpython: started
Running setup.py install for wxpython: finished with status 'error'
Complete output from command /home/travis/virtualenv/python3.6.2/bin/python -u -c "import setuptools, tokenize;file='/tmp/pip-build-2evi4tjt/wxpython/setup.py';f=getattr(tokenize, 'open', open)(file);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, file, 'exec'))" install --record /tmp/pip-ykt87at0-record/install-record.txt --single-version-externally-managed --compile --install-headers /home/travis/virtualenv/python3.6.2/include/site/python3.6/wxpython:
running install
running build
WARNING: Building this way assumes that all generated files have been
generated already. If that is not the case then use build.py directly
to generate the source and perform the build stage. You can use
--skip-build with the bdist_* or install commands to avoid this
message and the wxWidgets and Phoenix build steps in the future.
Command "/home/travis/virtualenv/python3.6.2/bin/python -u -c "import setuptools, tokenize;file='/tmp/pip-build-2evi4tjt/wxpython/setup.py';f=getattr(tokenize, 'open', open)(file);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, file, 'exec'))" install --record /tmp/pip-ykt87at0-record/install-record.txt --single-version-externally-managed --compile --install-headers /home/travis/virtualenv/python3.6.2/include/site/python3.6/wxpython" failed with error code 1 in /tmp/pip-build-2evi4tjt/wxpython/
The command "pip install -U wxpython" failed and exited with 1 during .
Your build has been stopped.
The text was updated successfully, but these errors were encountered: