Remote start stopped working

[CykloneFij]

Since the last few updates, I forget when it was working, remote starting using the built-in service with this integration no longer works.
My car is a 2019 Toyota RAV4 Hybrid. I have always maintained the Connect services subscription.
All other sensors work, Locking/unlocking, tire pressures, etc.

I forgot to add the log entry:

`This error originated from a custom integration.

Logger: custom_components.toyota_na
Source: custom_components/toyota_na/init.py:81
integration: Toyota (North America) (documentation, issues)
First occurred: 15:59:02 (1 occurrences)
Last logged: 15:59:02

Device missing config entry`

[seang96]

Looks like dupe of #98. You likely have a helper that is associated with the car device and that adds it as a configuration in the integratuon and it currently doesn't handle it. I have a PR open for a while that loops and looks for the vehicle configs detailed in the issue too.

[CykloneFij]

Looks like dupe of #98. You likely have a helper that is associated with the car device and that adds it as a configuration in the integratuon and it currently doesn't handle it. I have a PR open for a while that loops and looks for the vehicle configs detailed in the issue too.

Ah thanks mate. I didn't look through the past issues close enough. I do use 4 threshold helpers for the tires, will remove them and check

[McCroden]

@CykloneFij did it work when you removed the helpers?

[CykloneFij]

@CykloneFij did it work when you removed the helpers?

@McCroden Yes, worked after removing helpers for both start and stop.