From 606b5ae2eec6c827ed84b4295295f18499cddd17 Mon Sep 17 00:00:00 2001 From: Hex Date: Sun, 31 Dec 2023 12:40:25 +0800 Subject: [PATCH 1/4] x86: increase bios boot partition to 1 MiB (#11741) --- target/linux/x86/image/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/linux/x86/image/Makefile b/target/linux/x86/image/Makefile index 677b758e01ce19..30a903515d56ed 100644 --- a/target/linux/x86/image/Makefile +++ b/target/linux/x86/image/Makefile @@ -53,7 +53,7 @@ define Build/combined $@ \ $(CONFIG_TARGET_KERNEL_PARTSIZE) $@.boot \ $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS) \ - 256 + 1024 endef define Build/grub-config From 7f1d1eed6f984c0f8f128f72ae39d95cb561d6f9 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Tue, 30 May 2023 02:44:00 +0100 Subject: [PATCH 2/4] kernel: backport MT7988 DSA support for Linux 6.1 Patches adding DSA support for MT7988 have been backported to Linux 5.15 but not to Linux 6.1. Import backports also to Linux 6.1. Signed-off-by: Daniel Golle --- ...ake-some-noise-if-register-read-fail.patch | 32 + ...a-mt7530-refactor-SGMII-PCS-creation.patch | 111 +++ ...mt7530-use-unlocked-regmap-accessors.patch | 74 ++ ...se-regmap-to-access-switch-register-.patch | 224 ++++++ ...ove-SGMII-PCS-creation-to-mt7530_pro.patch | 54 ++ ...t-dsa-mt7530-introduce-mutex-helpers.patch | 273 +++++++ ...ove-p5_intf_modes-function-to-mt7530.patch | 75 ++ ...ntroduce-mt7530_probe_common-helper-.patch | 155 ++++ ...ntroduce-mt7530_remove_common-helper.patch | 54 ++ ...t7530-introduce-separate-MDIO-driver.patch | 691 ++++++++++++++++++ ...kip-locking-if-MDIO-bus-isn-t-presen.patch | 47 ++ ...ntroduce-driver-for-MT7988-built-in-.patch | 421 +++++++++++ ...-dsa-mt7530-fix-support-for-MT7531BE.patch | 118 +++ ...e-all-MACs-are-powered-down-before-r.patch | 2 +- ...gister-OF-node-for-internal-MDIO-bus.patch | 4 +- 15 files changed, 2332 insertions(+), 3 deletions(-) create mode 100644 target/linux/generic/backport-6.1/790-v6.4-0001-net-dsa-mt7530-make-some-noise-if-register-read-fail.patch create mode 100644 target/linux/generic/backport-6.1/790-v6.4-0002-net-dsa-mt7530-refactor-SGMII-PCS-creation.patch create mode 100644 target/linux/generic/backport-6.1/790-v6.4-0003-net-dsa-mt7530-use-unlocked-regmap-accessors.patch create mode 100644 target/linux/generic/backport-6.1/790-v6.4-0004-net-dsa-mt7530-use-regmap-to-access-switch-register-.patch create mode 100644 target/linux/generic/backport-6.1/790-v6.4-0005-net-dsa-mt7530-move-SGMII-PCS-creation-to-mt7530_pro.patch create mode 100644 target/linux/generic/backport-6.1/790-v6.4-0006-net-dsa-mt7530-introduce-mutex-helpers.patch create mode 100644 target/linux/generic/backport-6.1/790-v6.4-0007-net-dsa-mt7530-move-p5_intf_modes-function-to-mt7530.patch create mode 100644 target/linux/generic/backport-6.1/790-v6.4-0008-net-dsa-mt7530-introduce-mt7530_probe_common-helper-.patch create mode 100644 target/linux/generic/backport-6.1/790-v6.4-0009-net-dsa-mt7530-introduce-mt7530_remove_common-helper.patch create mode 100644 target/linux/generic/backport-6.1/790-v6.4-0010-net-dsa-mt7530-introduce-separate-MDIO-driver.patch create mode 100644 target/linux/generic/backport-6.1/790-v6.4-0011-net-dsa-mt7530-skip-locking-if-MDIO-bus-isn-t-presen.patch create mode 100644 target/linux/generic/backport-6.1/790-v6.4-0012-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch create mode 100644 target/linux/generic/backport-6.1/790-v6.4-0013-net-dsa-mt7530-fix-support-for-MT7531BE.patch diff --git a/target/linux/generic/backport-6.1/790-v6.4-0001-net-dsa-mt7530-make-some-noise-if-register-read-fail.patch b/target/linux/generic/backport-6.1/790-v6.4-0001-net-dsa-mt7530-make-some-noise-if-register-read-fail.patch new file mode 100644 index 00000000000000..4d024b063ab544 --- /dev/null +++ b/target/linux/generic/backport-6.1/790-v6.4-0001-net-dsa-mt7530-make-some-noise-if-register-read-fail.patch @@ -0,0 +1,32 @@ +From c3552d3f85f06cf4b4818bd84c4fcc09d8d45165 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Mon, 3 Apr 2023 02:17:19 +0100 +Subject: [PATCH 01/13] net: dsa: mt7530: make some noise if register read + fails + +Simply returning the negative error value instead of the read value +doesn't seem like a good idea. Return 0 instead and add WARN_ON_ONCE(1) +so this kind of error will not go unnoticed. + +Suggested-by: Andrew Lunn +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -224,9 +224,10 @@ mt7530_mii_read(struct mt7530_priv *priv + /* MT7530 uses 31 as the pseudo port */ + ret = bus->write(bus, 0x1f, 0x1f, page); + if (ret < 0) { ++ WARN_ON_ONCE(1); + dev_err(&bus->dev, + "failed to read mt7530 register\n"); +- return ret; ++ return 0; + } + + lo = bus->read(bus, 0x1f, r); diff --git a/target/linux/generic/backport-6.1/790-v6.4-0002-net-dsa-mt7530-refactor-SGMII-PCS-creation.patch b/target/linux/generic/backport-6.1/790-v6.4-0002-net-dsa-mt7530-refactor-SGMII-PCS-creation.patch new file mode 100644 index 00000000000000..4f255abc5bc92f --- /dev/null +++ b/target/linux/generic/backport-6.1/790-v6.4-0002-net-dsa-mt7530-refactor-SGMII-PCS-creation.patch @@ -0,0 +1,111 @@ +From b896355fc4988216d4f38582d07add9252a795ae Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Mon, 3 Apr 2023 02:17:30 +0100 +Subject: [PATCH 02/13] net: dsa: mt7530: refactor SGMII PCS creation + +Instead of macro templates use a dedidated function and allocated +regmap_config when creating the regmaps for the pcs-mtk-lynxi +instances. +This is in preparation to switching to use unlocked regmap accessors +and have regmap's locking API handle locking for us. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 74 +++++++++++++++++++++++++++------------- + 1 file changed, 50 insertions(+), 24 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -2950,26 +2950,56 @@ static const struct regmap_bus mt7531_re + .reg_update_bits = mt7530_regmap_update_bits, + }; + +-#define MT7531_PCS_REGMAP_CONFIG(_name, _reg_base) \ +- { \ +- .name = _name, \ +- .reg_bits = 16, \ +- .val_bits = 32, \ +- .reg_stride = 4, \ +- .reg_base = _reg_base, \ +- .max_register = 0x17c, \ ++static int ++mt7531_create_sgmii(struct mt7530_priv *priv) ++{ ++ struct regmap_config *mt7531_pcs_config[2]; ++ struct phylink_pcs *pcs; ++ struct regmap *regmap; ++ int i, ret = 0; ++ ++ for (i = 0; i < 2; i++) { ++ mt7531_pcs_config[i] = devm_kzalloc(priv->dev, ++ sizeof(struct regmap_config), ++ GFP_KERNEL); ++ if (!mt7531_pcs_config[i]) { ++ ret = -ENOMEM; ++ break; ++ } ++ ++ mt7531_pcs_config[i]->name = i ? "port6" : "port5"; ++ mt7531_pcs_config[i]->reg_bits = 16; ++ mt7531_pcs_config[i]->val_bits = 32; ++ mt7531_pcs_config[i]->reg_stride = 4; ++ mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i); ++ mt7531_pcs_config[i]->max_register = 0x17c; ++ ++ regmap = devm_regmap_init(priv->dev, ++ &mt7531_regmap_bus, priv, ++ mt7531_pcs_config[i]); ++ if (IS_ERR(regmap)) { ++ ret = PTR_ERR(regmap); ++ break; ++ } ++ pcs = mtk_pcs_lynxi_create(priv->dev, regmap, ++ MT7531_PHYA_CTRL_SIGNAL3, 0); ++ if (!pcs) { ++ ret = -ENXIO; ++ break; ++ } ++ priv->ports[5 + i].sgmii_pcs = pcs; + } + +-static const struct regmap_config mt7531_pcs_config[] = { +- MT7531_PCS_REGMAP_CONFIG("port5", MT7531_SGMII_REG_BASE(5)), +- MT7531_PCS_REGMAP_CONFIG("port6", MT7531_SGMII_REG_BASE(6)), +-}; ++ if (ret && i) ++ mtk_pcs_lynxi_destroy(priv->ports[5].sgmii_pcs); ++ ++ return ret; ++} + + static int + mt753x_setup(struct dsa_switch *ds) + { + struct mt7530_priv *priv = ds->priv; +- struct regmap *regmap; + int i, ret; + + /* Initialise the PCS devices */ +@@ -2991,15 +3021,11 @@ mt753x_setup(struct dsa_switch *ds) + if (ret && priv->irq) + mt7530_free_irq_common(priv); + +- if (priv->id == ID_MT7531) +- for (i = 0; i < 2; i++) { +- regmap = devm_regmap_init(ds->dev, +- &mt7531_regmap_bus, priv, +- &mt7531_pcs_config[i]); +- priv->ports[5 + i].sgmii_pcs = +- mtk_pcs_lynxi_create(ds->dev, regmap, +- MT7531_PHYA_CTRL_SIGNAL3, 0); +- } ++ if (priv->id == ID_MT7531) { ++ ret = mt7531_create_sgmii(priv); ++ if (ret && priv->irq) ++ mt7530_free_irq_common(priv); ++ } + + return ret; + } diff --git a/target/linux/generic/backport-6.1/790-v6.4-0003-net-dsa-mt7530-use-unlocked-regmap-accessors.patch b/target/linux/generic/backport-6.1/790-v6.4-0003-net-dsa-mt7530-use-unlocked-regmap-accessors.patch new file mode 100644 index 00000000000000..77ac3f3f26858f --- /dev/null +++ b/target/linux/generic/backport-6.1/790-v6.4-0003-net-dsa-mt7530-use-unlocked-regmap-accessors.patch @@ -0,0 +1,74 @@ +From 33396408776385f3d2f6069646169a6b5b28e3b3 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Mon, 3 Apr 2023 02:17:40 +0100 +Subject: [PATCH 03/13] net: dsa: mt7530: use unlocked regmap accessors + +Instead of wrapping the locked register accessor functions, use the +unlocked variants and add locking wrapper functions to let regmap +handle the locking. + +This is a preparation towards being able to always use regmap to +access switch registers instead of open-coded accessor functions. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 23 ++++++++++++++--------- + 1 file changed, 14 insertions(+), 9 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -2923,7 +2923,7 @@ static int mt7530_regmap_read(void *cont + { + struct mt7530_priv *priv = context; + +- *val = mt7530_read(priv, reg); ++ *val = mt7530_mii_read(priv, reg); + return 0; + }; + +@@ -2931,23 +2931,25 @@ static int mt7530_regmap_write(void *con + { + struct mt7530_priv *priv = context; + +- mt7530_write(priv, reg, val); ++ mt7530_mii_write(priv, reg, val); + return 0; + }; + +-static int mt7530_regmap_update_bits(void *context, unsigned int reg, +- unsigned int mask, unsigned int val) ++static void ++mt7530_mdio_regmap_lock(void *mdio_lock) + { +- struct mt7530_priv *priv = context; ++ mutex_lock_nested(mdio_lock, MDIO_MUTEX_NESTED); ++} + +- mt7530_rmw(priv, reg, mask, val); +- return 0; +-}; ++static void ++mt7530_mdio_regmap_unlock(void *mdio_lock) ++{ ++ mutex_unlock(mdio_lock); ++} + + static const struct regmap_bus mt7531_regmap_bus = { + .reg_write = mt7530_regmap_write, + .reg_read = mt7530_regmap_read, +- .reg_update_bits = mt7530_regmap_update_bits, + }; + + static int +@@ -2973,6 +2975,9 @@ mt7531_create_sgmii(struct mt7530_priv * + mt7531_pcs_config[i]->reg_stride = 4; + mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i); + mt7531_pcs_config[i]->max_register = 0x17c; ++ mt7531_pcs_config[i]->lock = mt7530_mdio_regmap_lock; ++ mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock; ++ mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock; + + regmap = devm_regmap_init(priv->dev, + &mt7531_regmap_bus, priv, diff --git a/target/linux/generic/backport-6.1/790-v6.4-0004-net-dsa-mt7530-use-regmap-to-access-switch-register-.patch b/target/linux/generic/backport-6.1/790-v6.4-0004-net-dsa-mt7530-use-regmap-to-access-switch-register-.patch new file mode 100644 index 00000000000000..6e3e8b09b964aa --- /dev/null +++ b/target/linux/generic/backport-6.1/790-v6.4-0004-net-dsa-mt7530-use-regmap-to-access-switch-register-.patch @@ -0,0 +1,224 @@ +From 743cba4345cb366248f9d375c6a9e50243dc0677 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Mon, 3 Apr 2023 02:17:52 +0100 +Subject: [PATCH 04/13] net: dsa: mt7530: use regmap to access switch register + space + +Use regmap API to access the switch register space. + +Signed-off-by: Daniel Golle +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 99 ++++++++++++++++++++++++---------------- + drivers/net/dsa/mt7530.h | 2 + + 2 files changed, 62 insertions(+), 39 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -183,9 +183,9 @@ core_clear(struct mt7530_priv *priv, u32 + } + + static int +-mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val) ++mt7530_regmap_write(void *context, unsigned int reg, unsigned int val) + { +- struct mii_bus *bus = priv->bus; ++ struct mii_bus *bus = context; + u16 page, r, lo, hi; + int ret; + +@@ -197,24 +197,34 @@ mt7530_mii_write(struct mt7530_priv *pri + /* MT7530 uses 31 as the pseudo port */ + ret = bus->write(bus, 0x1f, 0x1f, page); + if (ret < 0) +- goto err; ++ return ret; + + ret = bus->write(bus, 0x1f, r, lo); + if (ret < 0) +- goto err; ++ return ret; + + ret = bus->write(bus, 0x1f, 0x10, hi); +-err: ++ return ret; ++} ++ ++static int ++mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val) ++{ ++ int ret; ++ ++ ret = regmap_write(priv->regmap, reg, val); ++ + if (ret < 0) +- dev_err(&bus->dev, ++ dev_err(priv->dev, + "failed to write mt7530 register\n"); ++ + return ret; + } + +-static u32 +-mt7530_mii_read(struct mt7530_priv *priv, u32 reg) ++static int ++mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val) + { +- struct mii_bus *bus = priv->bus; ++ struct mii_bus *bus = context; + u16 page, r, lo, hi; + int ret; + +@@ -223,17 +233,32 @@ mt7530_mii_read(struct mt7530_priv *priv + + /* MT7530 uses 31 as the pseudo port */ + ret = bus->write(bus, 0x1f, 0x1f, page); +- if (ret < 0) { ++ if (ret < 0) ++ return ret; ++ ++ lo = bus->read(bus, 0x1f, r); ++ hi = bus->read(bus, 0x1f, 0x10); ++ ++ *val = (hi << 16) | (lo & 0xffff); ++ ++ return 0; ++} ++ ++static u32 ++mt7530_mii_read(struct mt7530_priv *priv, u32 reg) ++{ ++ int ret; ++ u32 val; ++ ++ ret = regmap_read(priv->regmap, reg, &val); ++ if (ret) { + WARN_ON_ONCE(1); +- dev_err(&bus->dev, ++ dev_err(priv->dev, + "failed to read mt7530 register\n"); + return 0; + } + +- lo = bus->read(bus, 0x1f, r); +- hi = bus->read(bus, 0x1f, 0x10); +- +- return (hi << 16) | (lo & 0xffff); ++ return val; + } + + static void +@@ -283,14 +308,10 @@ mt7530_rmw(struct mt7530_priv *priv, u32 + u32 mask, u32 set) + { + struct mii_bus *bus = priv->bus; +- u32 val; + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + +- val = mt7530_mii_read(priv, reg); +- val &= ~mask; +- val |= set; +- mt7530_mii_write(priv, reg, val); ++ regmap_update_bits(priv->regmap, reg, mask, set); + + mutex_unlock(&bus->mdio_lock); + } +@@ -298,7 +319,7 @@ mt7530_rmw(struct mt7530_priv *priv, u32 + static void + mt7530_set(struct mt7530_priv *priv, u32 reg, u32 val) + { +- mt7530_rmw(priv, reg, 0, val); ++ mt7530_rmw(priv, reg, val, val); + } + + static void +@@ -2919,22 +2940,6 @@ static const struct phylink_pcs_ops mt75 + .pcs_an_restart = mt7530_pcs_an_restart, + }; + +-static int mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val) +-{ +- struct mt7530_priv *priv = context; +- +- *val = mt7530_mii_read(priv, reg); +- return 0; +-}; +- +-static int mt7530_regmap_write(void *context, unsigned int reg, unsigned int val) +-{ +- struct mt7530_priv *priv = context; +- +- mt7530_mii_write(priv, reg, val); +- return 0; +-}; +- + static void + mt7530_mdio_regmap_lock(void *mdio_lock) + { +@@ -2947,7 +2952,7 @@ mt7530_mdio_regmap_unlock(void *mdio_loc + mutex_unlock(mdio_lock); + } + +-static const struct regmap_bus mt7531_regmap_bus = { ++static const struct regmap_bus mt7530_regmap_bus = { + .reg_write = mt7530_regmap_write, + .reg_read = mt7530_regmap_read, + }; +@@ -2980,7 +2985,7 @@ mt7531_create_sgmii(struct mt7530_priv * + mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock; + + regmap = devm_regmap_init(priv->dev, +- &mt7531_regmap_bus, priv, ++ &mt7530_regmap_bus, priv->bus, + mt7531_pcs_config[i]); + if (IS_ERR(regmap)) { + ret = PTR_ERR(regmap); +@@ -3145,6 +3150,7 @@ MODULE_DEVICE_TABLE(of, mt7530_of_match) + static int + mt7530_probe(struct mdio_device *mdiodev) + { ++ static struct regmap_config *regmap_config; + struct mt7530_priv *priv; + struct device_node *dn; + +@@ -3224,6 +3230,21 @@ mt7530_probe(struct mdio_device *mdiodev + mutex_init(&priv->reg_mutex); + dev_set_drvdata(&mdiodev->dev, priv); + ++ regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config), ++ GFP_KERNEL); ++ if (!regmap_config) ++ return -ENOMEM; ++ ++ regmap_config->reg_bits = 16; ++ regmap_config->val_bits = 32; ++ regmap_config->reg_stride = 4; ++ regmap_config->max_register = MT7530_CREV; ++ regmap_config->disable_locking = true; ++ priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, ++ priv->bus, regmap_config); ++ if (IS_ERR(priv->regmap)) ++ return PTR_ERR(priv->regmap); ++ + return dsa_register_switch(priv->ds); + } + +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -747,6 +747,7 @@ struct mt753x_info { + * @dev: The device pointer + * @ds: The pointer to the dsa core structure + * @bus: The bus used for the device and built-in PHY ++ * @regmap: The regmap instance representing all switch registers + * @rstc: The pointer to reset control used by MCM + * @core_pwr: The power supplied into the core + * @io_pwr: The power supplied into the I/O +@@ -767,6 +768,7 @@ struct mt7530_priv { + struct device *dev; + struct dsa_switch *ds; + struct mii_bus *bus; ++ struct regmap *regmap; + struct reset_control *rstc; + struct regulator *core_pwr; + struct regulator *io_pwr; diff --git a/target/linux/generic/backport-6.1/790-v6.4-0005-net-dsa-mt7530-move-SGMII-PCS-creation-to-mt7530_pro.patch b/target/linux/generic/backport-6.1/790-v6.4-0005-net-dsa-mt7530-move-SGMII-PCS-creation-to-mt7530_pro.patch new file mode 100644 index 00000000000000..a02702fd687b93 --- /dev/null +++ b/target/linux/generic/backport-6.1/790-v6.4-0005-net-dsa-mt7530-move-SGMII-PCS-creation-to-mt7530_pro.patch @@ -0,0 +1,54 @@ +From f3cf1d06e2aef644b426c23b4bb570780b1f8d47 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Mon, 3 Apr 2023 02:18:04 +0100 +Subject: [PATCH 05/13] net: dsa: mt7530: move SGMII PCS creation to + mt7530_probe function + +Move creating the SGMII PCS from mt753x_setup() to the more appropriate +mt7530_probe() function. +This is done also in preparation of moving all functions related to +MDIO-connected MT753x switches to a separate module. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 13 +++++++------ + 1 file changed, 7 insertions(+), 6 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -3031,12 +3031,6 @@ mt753x_setup(struct dsa_switch *ds) + if (ret && priv->irq) + mt7530_free_irq_common(priv); + +- if (priv->id == ID_MT7531) { +- ret = mt7531_create_sgmii(priv); +- if (ret && priv->irq) +- mt7530_free_irq_common(priv); +- } +- + return ret; + } + +@@ -3153,6 +3147,7 @@ mt7530_probe(struct mdio_device *mdiodev + static struct regmap_config *regmap_config; + struct mt7530_priv *priv; + struct device_node *dn; ++ int ret; + + dn = mdiodev->dev.of_node; + +@@ -3245,6 +3240,12 @@ mt7530_probe(struct mdio_device *mdiodev + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + ++ if (priv->id == ID_MT7531) { ++ ret = mt7531_create_sgmii(priv); ++ if (ret) ++ return ret; ++ } ++ + return dsa_register_switch(priv->ds); + } + diff --git a/target/linux/generic/backport-6.1/790-v6.4-0006-net-dsa-mt7530-introduce-mutex-helpers.patch b/target/linux/generic/backport-6.1/790-v6.4-0006-net-dsa-mt7530-introduce-mutex-helpers.patch new file mode 100644 index 00000000000000..98122caf0904b4 --- /dev/null +++ b/target/linux/generic/backport-6.1/790-v6.4-0006-net-dsa-mt7530-introduce-mutex-helpers.patch @@ -0,0 +1,273 @@ +From e4729ae7c095c0c87794bff47ea43e35d69de986 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Mon, 3 Apr 2023 02:18:16 +0100 +Subject: [PATCH 06/13] net: dsa: mt7530: introduce mutex helpers + +As the MDIO bus lock only needs to be involved if actually operating +on an MDIO-connected switch we will need to skip locking for built-in +switches which are accessed via MMIO. +Create helper functions which simplify that upcoming change. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 73 ++++++++++++++++++++-------------------- + 1 file changed, 36 insertions(+), 37 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -143,31 +143,40 @@ err: + } + + static void +-core_write(struct mt7530_priv *priv, u32 reg, u32 val) ++mt7530_mutex_lock(struct mt7530_priv *priv) + { +- struct mii_bus *bus = priv->bus; ++ mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); ++} + +- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); ++static void ++mt7530_mutex_unlock(struct mt7530_priv *priv) ++{ ++ mutex_unlock(&priv->bus->mdio_lock); ++} ++ ++static void ++core_write(struct mt7530_priv *priv, u32 reg, u32 val) ++{ ++ mt7530_mutex_lock(priv); + + core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val); + +- mutex_unlock(&bus->mdio_lock); ++ mt7530_mutex_unlock(priv); + } + + static void + core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set) + { +- struct mii_bus *bus = priv->bus; + u32 val; + +- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); ++ mt7530_mutex_lock(priv); + + val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2); + val &= ~mask; + val |= set; + core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val); + +- mutex_unlock(&bus->mdio_lock); ++ mt7530_mutex_unlock(priv); + } + + static void +@@ -264,13 +273,11 @@ mt7530_mii_read(struct mt7530_priv *priv + static void + mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val) + { +- struct mii_bus *bus = priv->bus; +- +- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); ++ mt7530_mutex_lock(priv); + + mt7530_mii_write(priv, reg, val); + +- mutex_unlock(&bus->mdio_lock); ++ mt7530_mutex_unlock(priv); + } + + static u32 +@@ -282,14 +289,13 @@ _mt7530_unlocked_read(struct mt7530_dumm + static u32 + _mt7530_read(struct mt7530_dummy_poll *p) + { +- struct mii_bus *bus = p->priv->bus; + u32 val; + +- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); ++ mt7530_mutex_lock(p->priv); + + val = mt7530_mii_read(p->priv, p->reg); + +- mutex_unlock(&bus->mdio_lock); ++ mt7530_mutex_unlock(p->priv); + + return val; + } +@@ -307,13 +313,11 @@ static void + mt7530_rmw(struct mt7530_priv *priv, u32 reg, + u32 mask, u32 set) + { +- struct mii_bus *bus = priv->bus; +- +- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); ++ mt7530_mutex_lock(priv); + + regmap_update_bits(priv->regmap, reg, mask, set); + +- mutex_unlock(&bus->mdio_lock); ++ mt7530_mutex_unlock(priv); + } + + static void +@@ -645,14 +649,13 @@ static int + mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad, + int regnum) + { +- struct mii_bus *bus = priv->bus; + struct mt7530_dummy_poll p; + u32 reg, val; + int ret; + + INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); + +- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); ++ mt7530_mutex_lock(priv); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); +@@ -685,7 +688,7 @@ mt7531_ind_c45_phy_read(struct mt7530_pr + + ret = val & MT7531_MDIO_RW_DATA_MASK; + out: +- mutex_unlock(&bus->mdio_lock); ++ mt7530_mutex_unlock(priv); + + return ret; + } +@@ -694,14 +697,13 @@ static int + mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad, + int regnum, u32 data) + { +- struct mii_bus *bus = priv->bus; + struct mt7530_dummy_poll p; + u32 val, reg; + int ret; + + INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); + +- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); ++ mt7530_mutex_lock(priv); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); +@@ -733,7 +735,7 @@ mt7531_ind_c45_phy_write(struct mt7530_p + } + + out: +- mutex_unlock(&bus->mdio_lock); ++ mt7530_mutex_unlock(priv); + + return ret; + } +@@ -741,14 +743,13 @@ out: + static int + mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum) + { +- struct mii_bus *bus = priv->bus; + struct mt7530_dummy_poll p; + int ret; + u32 val; + + INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); + +- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); ++ mt7530_mutex_lock(priv); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); +@@ -771,7 +772,7 @@ mt7531_ind_c22_phy_read(struct mt7530_pr + + ret = val & MT7531_MDIO_RW_DATA_MASK; + out: +- mutex_unlock(&bus->mdio_lock); ++ mt7530_mutex_unlock(priv); + + return ret; + } +@@ -780,14 +781,13 @@ static int + mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum, + u16 data) + { +- struct mii_bus *bus = priv->bus; + struct mt7530_dummy_poll p; + int ret; + u32 reg; + + INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); + +- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); ++ mt7530_mutex_lock(priv); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg, + !(reg & MT7531_PHY_ACS_ST), 20, 100000); +@@ -809,7 +809,7 @@ mt7531_ind_c22_phy_write(struct mt7530_p + } + + out: +- mutex_unlock(&bus->mdio_lock); ++ mt7530_mutex_unlock(priv); + + return ret; + } +@@ -1109,7 +1109,6 @@ static int + mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) + { + struct mt7530_priv *priv = ds->priv; +- struct mii_bus *bus = priv->bus; + int length; + u32 val; + +@@ -1120,7 +1119,7 @@ mt7530_port_change_mtu(struct dsa_switch + if (!dsa_is_cpu_port(ds, port)) + return 0; + +- mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); ++ mt7530_mutex_lock(priv); + + val = mt7530_mii_read(priv, MT7530_GMACCR); + val &= ~MAX_RX_PKT_LEN_MASK; +@@ -1141,7 +1140,7 @@ mt7530_port_change_mtu(struct dsa_switch + + mt7530_mii_write(priv, MT7530_GMACCR, val); + +- mutex_unlock(&bus->mdio_lock); ++ mt7530_mutex_unlock(priv); + + return 0; + } +@@ -1942,10 +1941,10 @@ mt7530_irq_thread_fn(int irq, void *dev_ + u32 val; + int p; + +- mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); ++ mt7530_mutex_lock(priv); + val = mt7530_mii_read(priv, MT7530_SYS_INT_STS); + mt7530_mii_write(priv, MT7530_SYS_INT_STS, val); +- mutex_unlock(&priv->bus->mdio_lock); ++ mt7530_mutex_unlock(priv); + + for (p = 0; p < MT7530_NUM_PHYS; p++) { + if (BIT(p) & val) { +@@ -1981,7 +1980,7 @@ mt7530_irq_bus_lock(struct irq_data *d) + { + struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); + +- mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); ++ mt7530_mutex_lock(priv); + } + + static void +@@ -1990,7 +1989,7 @@ mt7530_irq_bus_sync_unlock(struct irq_da + struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); + + mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable); +- mutex_unlock(&priv->bus->mdio_lock); ++ mt7530_mutex_unlock(priv); + } + + static struct irq_chip mt7530_irq_chip = { diff --git a/target/linux/generic/backport-6.1/790-v6.4-0007-net-dsa-mt7530-move-p5_intf_modes-function-to-mt7530.patch b/target/linux/generic/backport-6.1/790-v6.4-0007-net-dsa-mt7530-move-p5_intf_modes-function-to-mt7530.patch new file mode 100644 index 00000000000000..5065d7352326e2 --- /dev/null +++ b/target/linux/generic/backport-6.1/790-v6.4-0007-net-dsa-mt7530-move-p5_intf_modes-function-to-mt7530.patch @@ -0,0 +1,75 @@ +From 0d7ae94a0c581f86939bebec0b6ccd66e640d1d8 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Mon, 3 Apr 2023 02:18:28 +0100 +Subject: [PATCH 07/13] net: dsa: mt7530: move p5_intf_modes() function to + mt7530.c + +In preparation of splitting mt7530.c into a driver for MDIO-connected +as well as MDIO-accessed built-in switches on one hand and MMIO-accessed +built-in switches move the p5_inft_modes() function from mt7530.h to +mt7530.c. The function is only needed there and will trigger a compiler +warning about a defined but unused function otherwise when including +mt7530.h in the to-be-introduced bus-specific drivers. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 18 ++++++++++++++++++ + drivers/net/dsa/mt7530.h | 18 ------------------ + 2 files changed, 18 insertions(+), 18 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -950,6 +950,24 @@ mt7530_set_ageing_time(struct dsa_switch + return 0; + } + ++static const char *p5_intf_modes(unsigned int p5_interface) ++{ ++ switch (p5_interface) { ++ case P5_DISABLED: ++ return "DISABLED"; ++ case P5_INTF_SEL_PHY_P0: ++ return "PHY P0"; ++ case P5_INTF_SEL_PHY_P4: ++ return "PHY P4"; ++ case P5_INTF_SEL_GMAC5: ++ return "GMAC5"; ++ case P5_INTF_SEL_GMAC5_SGMII: ++ return "GMAC5_SGMII"; ++ default: ++ return "unknown"; ++ } ++} ++ + static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) + { + struct mt7530_priv *priv = ds->priv; +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -682,24 +682,6 @@ enum p5_interface_select { + P5_INTF_SEL_GMAC5_SGMII, + }; + +-static const char *p5_intf_modes(unsigned int p5_interface) +-{ +- switch (p5_interface) { +- case P5_DISABLED: +- return "DISABLED"; +- case P5_INTF_SEL_PHY_P0: +- return "PHY P0"; +- case P5_INTF_SEL_PHY_P4: +- return "PHY P4"; +- case P5_INTF_SEL_GMAC5: +- return "GMAC5"; +- case P5_INTF_SEL_GMAC5_SGMII: +- return "GMAC5_SGMII"; +- default: +- return "unknown"; +- } +-} +- + struct mt7530_priv; + + struct mt753x_pcs { diff --git a/target/linux/generic/backport-6.1/790-v6.4-0008-net-dsa-mt7530-introduce-mt7530_probe_common-helper-.patch b/target/linux/generic/backport-6.1/790-v6.4-0008-net-dsa-mt7530-introduce-mt7530_probe_common-helper-.patch new file mode 100644 index 00000000000000..761aa1d9797bbb --- /dev/null +++ b/target/linux/generic/backport-6.1/790-v6.4-0008-net-dsa-mt7530-introduce-mt7530_probe_common-helper-.patch @@ -0,0 +1,155 @@ +From 4d632005c90e253c000d0db73b7cdb9d8dc2e2dd Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Mon, 3 Apr 2023 02:18:39 +0100 +Subject: [PATCH 08/13] net: dsa: mt7530: introduce mt7530_probe_common helper + function + +Move commonly used parts from mt7530_probe into new mt7530_probe_common +helper function which will be used by both, mt7530_probe and the +to-be-introduced mt7988_probe. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 98 ++++++++++++++++++++++------------------ + 1 file changed, 54 insertions(+), 44 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -3159,44 +3159,21 @@ static const struct of_device_id mt7530_ + MODULE_DEVICE_TABLE(of, mt7530_of_match); + + static int +-mt7530_probe(struct mdio_device *mdiodev) ++mt7530_probe_common(struct mt7530_priv *priv) + { +- static struct regmap_config *regmap_config; +- struct mt7530_priv *priv; +- struct device_node *dn; +- int ret; ++ struct device *dev = priv->dev; + +- dn = mdiodev->dev.of_node; +- +- priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL); +- if (!priv) +- return -ENOMEM; +- +- priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL); ++ priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); + if (!priv->ds) + return -ENOMEM; + +- priv->ds->dev = &mdiodev->dev; ++ priv->ds->dev = dev; + priv->ds->num_ports = MT7530_NUM_PORTS; + +- /* Use medatek,mcm property to distinguish hardware type that would +- * casues a little bit differences on power-on sequence. +- */ +- priv->mcm = of_property_read_bool(dn, "mediatek,mcm"); +- if (priv->mcm) { +- dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n"); +- +- priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm"); +- if (IS_ERR(priv->rstc)) { +- dev_err(&mdiodev->dev, "Couldn't get our reset line\n"); +- return PTR_ERR(priv->rstc); +- } +- } +- + /* Get the hardware identifier from the devicetree node. + * We will need it for some of the clock and regulator setup. + */ +- priv->info = of_device_get_match_data(&mdiodev->dev); ++ priv->info = of_device_get_match_data(dev); + if (!priv->info) + return -EINVAL; + +@@ -3210,23 +3187,53 @@ mt7530_probe(struct mdio_device *mdiodev + return -EINVAL; + + priv->id = priv->info->id; ++ priv->dev = dev; ++ priv->ds->priv = priv; ++ priv->ds->ops = &mt7530_switch_ops; ++ mutex_init(&priv->reg_mutex); ++ dev_set_drvdata(dev, priv); + +- if (priv->id == ID_MT7530) { +- priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core"); +- if (IS_ERR(priv->core_pwr)) +- return PTR_ERR(priv->core_pwr); ++ return 0; ++} + +- priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io"); +- if (IS_ERR(priv->io_pwr)) +- return PTR_ERR(priv->io_pwr); +- } ++static int ++mt7530_probe(struct mdio_device *mdiodev) ++{ ++ static struct regmap_config *regmap_config; ++ struct mt7530_priv *priv; ++ struct device_node *dn; ++ int ret; ++ ++ dn = mdiodev->dev.of_node; ++ ++ priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; + +- /* Not MCM that indicates switch works as the remote standalone ++ priv->bus = mdiodev->bus; ++ priv->dev = &mdiodev->dev; ++ ++ ret = mt7530_probe_common(priv); ++ if (ret) ++ return ret; ++ ++ /* Use medatek,mcm property to distinguish hardware type that would ++ * cause a little bit differences on power-on sequence. ++ * Not MCM that indicates switch works as the remote standalone + * integrated circuit so the GPIO pin would be used to complete + * the reset, otherwise memory-mapped register accessing used + * through syscon provides in the case of MCM. + */ +- if (!priv->mcm) { ++ priv->mcm = of_property_read_bool(dn, "mediatek,mcm"); ++ if (priv->mcm) { ++ dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n"); ++ ++ priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm"); ++ if (IS_ERR(priv->rstc)) { ++ dev_err(&mdiodev->dev, "Couldn't get our reset line\n"); ++ return PTR_ERR(priv->rstc); ++ } ++ } else { + priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(priv->reset)) { +@@ -3235,12 +3242,15 @@ mt7530_probe(struct mdio_device *mdiodev + } + } + +- priv->bus = mdiodev->bus; +- priv->dev = &mdiodev->dev; +- priv->ds->priv = priv; +- priv->ds->ops = &mt7530_switch_ops; +- mutex_init(&priv->reg_mutex); +- dev_set_drvdata(&mdiodev->dev, priv); ++ if (priv->id == ID_MT7530) { ++ priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core"); ++ if (IS_ERR(priv->core_pwr)) ++ return PTR_ERR(priv->core_pwr); ++ ++ priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io"); ++ if (IS_ERR(priv->io_pwr)) ++ return PTR_ERR(priv->io_pwr); ++ } + + regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config), + GFP_KERNEL); diff --git a/target/linux/generic/backport-6.1/790-v6.4-0009-net-dsa-mt7530-introduce-mt7530_remove_common-helper.patch b/target/linux/generic/backport-6.1/790-v6.4-0009-net-dsa-mt7530-introduce-mt7530_remove_common-helper.patch new file mode 100644 index 00000000000000..d3c2a7e2c9b8d4 --- /dev/null +++ b/target/linux/generic/backport-6.1/790-v6.4-0009-net-dsa-mt7530-introduce-mt7530_remove_common-helper.patch @@ -0,0 +1,54 @@ +From 69b838d2629e6b82bcd9e0ab3c1c03f46e5e01d3 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Mon, 3 Apr 2023 02:18:50 +0100 +Subject: [PATCH 09/13] net: dsa: mt7530: introduce mt7530_remove_common helper + function + +Move commonly used parts from mt7530_remove into new +mt7530_remove_common helper function which will be used by both, +mt7530_remove and the to-be-introduced mt7988_remove. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 18 ++++++++++++------ + 1 file changed, 12 insertions(+), 6 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -3277,6 +3277,17 @@ mt7530_probe(struct mdio_device *mdiodev + } + + static void ++mt7530_remove_common(struct mt7530_priv *priv) ++{ ++ if (priv->irq) ++ mt7530_free_irq(priv); ++ ++ dsa_unregister_switch(priv->ds); ++ ++ mutex_destroy(&priv->reg_mutex); ++} ++ ++static void + mt7530_remove(struct mdio_device *mdiodev) + { + struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); +@@ -3295,15 +3306,10 @@ mt7530_remove(struct mdio_device *mdiode + dev_err(priv->dev, "Failed to disable io pwr: %d\n", + ret); + +- if (priv->irq) +- mt7530_free_irq(priv); +- +- dsa_unregister_switch(priv->ds); ++ mt7530_remove_common(priv); + + for (i = 0; i < 2; ++i) + mtk_pcs_lynxi_destroy(priv->ports[5 + i].sgmii_pcs); +- +- mutex_destroy(&priv->reg_mutex); + } + + static void mt7530_shutdown(struct mdio_device *mdiodev) diff --git a/target/linux/generic/backport-6.1/790-v6.4-0010-net-dsa-mt7530-introduce-separate-MDIO-driver.patch b/target/linux/generic/backport-6.1/790-v6.4-0010-net-dsa-mt7530-introduce-separate-MDIO-driver.patch new file mode 100644 index 00000000000000..55378ca016b5b5 --- /dev/null +++ b/target/linux/generic/backport-6.1/790-v6.4-0010-net-dsa-mt7530-introduce-separate-MDIO-driver.patch @@ -0,0 +1,691 @@ +From 8eceed6dbd74067dbf4d8e39f14734f4d2f35176 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Mon, 3 Apr 2023 02:19:13 +0100 +Subject: [PATCH 10/13] net: dsa: mt7530: introduce separate MDIO driver + +Split MT7530 switch driver into a common part and a part specific +for MDIO connected switches and multi-chip modules. +Move MDIO-specific functions to newly introduced mt7530-mdio.c while +keeping the common parts in mt7530.c. +Introduce new Kconfig symbol CONFIG_NET_DSA_MT7530_MDIO which is +implied by CONFIG_NET_DSA_MT7530. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + MAINTAINERS | 1 + + drivers/net/dsa/Kconfig | 16 +- + drivers/net/dsa/Makefile | 1 + + drivers/net/dsa/mt7530-mdio.c | 271 ++++++++++++++++++++++++++++++++++ + drivers/net/dsa/mt7530.c | 264 +-------------------------------- + drivers/net/dsa/mt7530.h | 6 + + 6 files changed, 301 insertions(+), 258 deletions(-) + create mode 100644 drivers/net/dsa/mt7530-mdio.c + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -13060,6 +13060,7 @@ M: Landen Chao + L: netdev@vger.kernel.org + S: Maintained ++F: drivers/net/dsa/mt7530-mdio.c + F: drivers/net/dsa/mt7530.* + F: net/dsa/tag_mtk.c + +--- a/drivers/net/dsa/Kconfig ++++ b/drivers/net/dsa/Kconfig +@@ -37,10 +37,22 @@ config NET_DSA_MT7530 + tristate "MediaTek MT753x and MT7621 Ethernet switch support" + select NET_DSA_TAG_MTK + select MEDIATEK_GE_PHY ++ imply NET_DSA_MT7530_MDIO ++ help ++ This enables support for the MediaTek MT7530 and MT7531 Ethernet ++ switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT, ++ MT7621ST and MT7623AI SoCs, and built-in switch in MT7988 SoC are ++ supported as well. ++ ++config NET_DSA_MT7530_MDIO ++ tristate "MediaTek MT7530 MDIO interface driver" ++ depends on NET_DSA_MT7530 + select PCS_MTK_LYNXI + help +- This enables support for the MediaTek MT7530, MT7531, and MT7621 +- Ethernet switch chips. ++ This enables support for the MediaTek MT7530 and MT7531 switch ++ chips which are connected via MDIO, as well as multi-chip ++ module MT7530 which can be found in the MT7621AT, MT7621DAT, ++ MT7621ST and MT7623AI SoCs. + + config NET_DSA_MV88E6060 + tristate "Marvell 88E6060 ethernet switch chip support" +--- a/drivers/net/dsa/Makefile ++++ b/drivers/net/dsa/Makefile +@@ -7,6 +7,7 @@ obj-$(CONFIG_FIXED_PHY) += dsa_loop_bdi + endif + obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o + obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o ++obj-$(CONFIG_NET_DSA_MT7530_MDIO) += mt7530-mdio.o + obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o + obj-$(CONFIG_NET_DSA_RZN1_A5PSW) += rzn1_a5psw.o + obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o +--- /dev/null ++++ b/drivers/net/dsa/mt7530-mdio.c +@@ -0,0 +1,271 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "mt7530.h" ++ ++static int ++mt7530_regmap_write(void *context, unsigned int reg, unsigned int val) ++{ ++ struct mii_bus *bus = context; ++ u16 page, r, lo, hi; ++ int ret; ++ ++ page = (reg >> 6) & 0x3ff; ++ r = (reg >> 2) & 0xf; ++ lo = val & 0xffff; ++ hi = val >> 16; ++ ++ /* MT7530 uses 31 as the pseudo port */ ++ ret = bus->write(bus, 0x1f, 0x1f, page); ++ if (ret < 0) ++ return ret; ++ ++ ret = bus->write(bus, 0x1f, r, lo); ++ if (ret < 0) ++ return ret; ++ ++ ret = bus->write(bus, 0x1f, 0x10, hi); ++ return ret; ++} ++ ++static int ++mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val) ++{ ++ struct mii_bus *bus = context; ++ u16 page, r, lo, hi; ++ int ret; ++ ++ page = (reg >> 6) & 0x3ff; ++ r = (reg >> 2) & 0xf; ++ ++ /* MT7530 uses 31 as the pseudo port */ ++ ret = bus->write(bus, 0x1f, 0x1f, page); ++ if (ret < 0) ++ return ret; ++ ++ lo = bus->read(bus, 0x1f, r); ++ hi = bus->read(bus, 0x1f, 0x10); ++ ++ *val = (hi << 16) | (lo & 0xffff); ++ ++ return 0; ++} ++ ++static void ++mt7530_mdio_regmap_lock(void *mdio_lock) ++{ ++ mutex_lock_nested(mdio_lock, MDIO_MUTEX_NESTED); ++} ++ ++static void ++mt7530_mdio_regmap_unlock(void *mdio_lock) ++{ ++ mutex_unlock(mdio_lock); ++} ++ ++static const struct regmap_bus mt7530_regmap_bus = { ++ .reg_write = mt7530_regmap_write, ++ .reg_read = mt7530_regmap_read, ++}; ++ ++static int ++mt7531_create_sgmii(struct mt7530_priv *priv) ++{ ++ struct regmap_config *mt7531_pcs_config[2]; ++ struct phylink_pcs *pcs; ++ struct regmap *regmap; ++ int i, ret = 0; ++ ++ for (i = 0; i < 2; i++) { ++ mt7531_pcs_config[i] = devm_kzalloc(priv->dev, ++ sizeof(struct regmap_config), ++ GFP_KERNEL); ++ if (!mt7531_pcs_config[i]) { ++ ret = -ENOMEM; ++ break; ++ } ++ ++ mt7531_pcs_config[i]->name = i ? "port6" : "port5"; ++ mt7531_pcs_config[i]->reg_bits = 16; ++ mt7531_pcs_config[i]->val_bits = 32; ++ mt7531_pcs_config[i]->reg_stride = 4; ++ mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i); ++ mt7531_pcs_config[i]->max_register = 0x17c; ++ mt7531_pcs_config[i]->lock = mt7530_mdio_regmap_lock; ++ mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock; ++ mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock; ++ ++ regmap = devm_regmap_init(priv->dev, ++ &mt7530_regmap_bus, priv->bus, ++ mt7531_pcs_config[i]); ++ if (IS_ERR(regmap)) { ++ ret = PTR_ERR(regmap); ++ break; ++ } ++ pcs = mtk_pcs_lynxi_create(priv->dev, regmap, ++ MT7531_PHYA_CTRL_SIGNAL3, 0); ++ if (!pcs) { ++ ret = -ENXIO; ++ break; ++ } ++ priv->ports[5 + i].sgmii_pcs = pcs; ++ } ++ ++ if (ret && i) ++ mtk_pcs_lynxi_destroy(priv->ports[5].sgmii_pcs); ++ ++ return ret; ++} ++ ++static const struct of_device_id mt7530_of_match[] = { ++ { .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], }, ++ { .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], }, ++ { .compatible = "mediatek,mt7531", .data = &mt753x_table[ID_MT7531], }, ++ { /* sentinel */ }, ++}; ++MODULE_DEVICE_TABLE(of, mt7530_of_match); ++ ++static int ++mt7530_probe(struct mdio_device *mdiodev) ++{ ++ static struct regmap_config *regmap_config; ++ struct mt7530_priv *priv; ++ struct device_node *dn; ++ int ret; ++ ++ dn = mdiodev->dev.of_node; ++ ++ priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ priv->bus = mdiodev->bus; ++ priv->dev = &mdiodev->dev; ++ ++ ret = mt7530_probe_common(priv); ++ if (ret) ++ return ret; ++ ++ /* Use medatek,mcm property to distinguish hardware type that would ++ * cause a little bit differences on power-on sequence. ++ * Not MCM that indicates switch works as the remote standalone ++ * integrated circuit so the GPIO pin would be used to complete ++ * the reset, otherwise memory-mapped register accessing used ++ * through syscon provides in the case of MCM. ++ */ ++ priv->mcm = of_property_read_bool(dn, "mediatek,mcm"); ++ if (priv->mcm) { ++ dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n"); ++ ++ priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm"); ++ if (IS_ERR(priv->rstc)) { ++ dev_err(&mdiodev->dev, "Couldn't get our reset line\n"); ++ return PTR_ERR(priv->rstc); ++ } ++ } else { ++ priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset", ++ GPIOD_OUT_LOW); ++ if (IS_ERR(priv->reset)) { ++ dev_err(&mdiodev->dev, "Couldn't get our reset line\n"); ++ return PTR_ERR(priv->reset); ++ } ++ } ++ ++ if (priv->id == ID_MT7530) { ++ priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core"); ++ if (IS_ERR(priv->core_pwr)) ++ return PTR_ERR(priv->core_pwr); ++ ++ priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io"); ++ if (IS_ERR(priv->io_pwr)) ++ return PTR_ERR(priv->io_pwr); ++ } ++ ++ regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config), ++ GFP_KERNEL); ++ if (!regmap_config) ++ return -ENOMEM; ++ ++ regmap_config->reg_bits = 16; ++ regmap_config->val_bits = 32; ++ regmap_config->reg_stride = 4; ++ regmap_config->max_register = MT7530_CREV; ++ regmap_config->disable_locking = true; ++ priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, ++ priv->bus, regmap_config); ++ if (IS_ERR(priv->regmap)) ++ return PTR_ERR(priv->regmap); ++ ++ if (priv->id == ID_MT7531) { ++ ret = mt7531_create_sgmii(priv); ++ if (ret) ++ return ret; ++ } ++ ++ return dsa_register_switch(priv->ds); ++} ++ ++static void ++mt7530_remove(struct mdio_device *mdiodev) ++{ ++ struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); ++ int ret = 0, i; ++ ++ if (!priv) ++ return; ++ ++ ret = regulator_disable(priv->core_pwr); ++ if (ret < 0) ++ dev_err(priv->dev, ++ "Failed to disable core power: %d\n", ret); ++ ++ ret = regulator_disable(priv->io_pwr); ++ if (ret < 0) ++ dev_err(priv->dev, "Failed to disable io pwr: %d\n", ++ ret); ++ ++ mt7530_remove_common(priv); ++ ++ for (i = 0; i < 2; ++i) ++ mtk_pcs_lynxi_destroy(priv->ports[5 + i].sgmii_pcs); ++} ++ ++static void mt7530_shutdown(struct mdio_device *mdiodev) ++{ ++ struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); ++ ++ if (!priv) ++ return; ++ ++ dsa_switch_shutdown(priv->ds); ++ ++ dev_set_drvdata(&mdiodev->dev, NULL); ++} ++ ++static struct mdio_driver mt7530_mdio_driver = { ++ .probe = mt7530_probe, ++ .remove = mt7530_remove, ++ .shutdown = mt7530_shutdown, ++ .mdiodrv.driver = { ++ .name = "mt7530-mdio", ++ .of_match_table = mt7530_of_match, ++ }, ++}; ++ ++mdio_module_driver(mt7530_mdio_driver); ++ ++MODULE_AUTHOR("Sean Wang "); ++MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch (MDIO)"); ++MODULE_LICENSE("GPL"); +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -14,7 +14,6 @@ + #include + #include + #include +-#include + #include + #include + #include +@@ -192,31 +191,6 @@ core_clear(struct mt7530_priv *priv, u32 + } + + static int +-mt7530_regmap_write(void *context, unsigned int reg, unsigned int val) +-{ +- struct mii_bus *bus = context; +- u16 page, r, lo, hi; +- int ret; +- +- page = (reg >> 6) & 0x3ff; +- r = (reg >> 2) & 0xf; +- lo = val & 0xffff; +- hi = val >> 16; +- +- /* MT7530 uses 31 as the pseudo port */ +- ret = bus->write(bus, 0x1f, 0x1f, page); +- if (ret < 0) +- return ret; +- +- ret = bus->write(bus, 0x1f, r, lo); +- if (ret < 0) +- return ret; +- +- ret = bus->write(bus, 0x1f, 0x10, hi); +- return ret; +-} +- +-static int + mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val) + { + int ret; +@@ -230,29 +204,6 @@ mt7530_mii_write(struct mt7530_priv *pri + return ret; + } + +-static int +-mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val) +-{ +- struct mii_bus *bus = context; +- u16 page, r, lo, hi; +- int ret; +- +- page = (reg >> 6) & 0x3ff; +- r = (reg >> 2) & 0xf; +- +- /* MT7530 uses 31 as the pseudo port */ +- ret = bus->write(bus, 0x1f, 0x1f, page); +- if (ret < 0) +- return ret; +- +- lo = bus->read(bus, 0x1f, r); +- hi = bus->read(bus, 0x1f, 0x10); +- +- *val = (hi << 16) | (lo & 0xffff); +- +- return 0; +-} +- + static u32 + mt7530_mii_read(struct mt7530_priv *priv, u32 reg) + { +@@ -2957,72 +2908,6 @@ static const struct phylink_pcs_ops mt75 + .pcs_an_restart = mt7530_pcs_an_restart, + }; + +-static void +-mt7530_mdio_regmap_lock(void *mdio_lock) +-{ +- mutex_lock_nested(mdio_lock, MDIO_MUTEX_NESTED); +-} +- +-static void +-mt7530_mdio_regmap_unlock(void *mdio_lock) +-{ +- mutex_unlock(mdio_lock); +-} +- +-static const struct regmap_bus mt7530_regmap_bus = { +- .reg_write = mt7530_regmap_write, +- .reg_read = mt7530_regmap_read, +-}; +- +-static int +-mt7531_create_sgmii(struct mt7530_priv *priv) +-{ +- struct regmap_config *mt7531_pcs_config[2]; +- struct phylink_pcs *pcs; +- struct regmap *regmap; +- int i, ret = 0; +- +- for (i = 0; i < 2; i++) { +- mt7531_pcs_config[i] = devm_kzalloc(priv->dev, +- sizeof(struct regmap_config), +- GFP_KERNEL); +- if (!mt7531_pcs_config[i]) { +- ret = -ENOMEM; +- break; +- } +- +- mt7531_pcs_config[i]->name = i ? "port6" : "port5"; +- mt7531_pcs_config[i]->reg_bits = 16; +- mt7531_pcs_config[i]->val_bits = 32; +- mt7531_pcs_config[i]->reg_stride = 4; +- mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i); +- mt7531_pcs_config[i]->max_register = 0x17c; +- mt7531_pcs_config[i]->lock = mt7530_mdio_regmap_lock; +- mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock; +- mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock; +- +- regmap = devm_regmap_init(priv->dev, +- &mt7530_regmap_bus, priv->bus, +- mt7531_pcs_config[i]); +- if (IS_ERR(regmap)) { +- ret = PTR_ERR(regmap); +- break; +- } +- pcs = mtk_pcs_lynxi_create(priv->dev, regmap, +- MT7531_PHYA_CTRL_SIGNAL3, 0); +- if (!pcs) { +- ret = -ENXIO; +- break; +- } +- priv->ports[5 + i].sgmii_pcs = pcs; +- } +- +- if (ret && i) +- mtk_pcs_lynxi_destroy(priv->ports[5].sgmii_pcs); +- +- return ret; +-} +- + static int + mt753x_setup(struct dsa_switch *ds) + { +@@ -3081,7 +2966,7 @@ static int mt753x_set_mac_eee(struct dsa + return 0; + } + +-static const struct dsa_switch_ops mt7530_switch_ops = { ++const struct dsa_switch_ops mt7530_switch_ops = { + .get_tag_protocol = mtk_get_tag_protocol, + .setup = mt753x_setup, + .get_strings = mt7530_get_strings, +@@ -3115,8 +3000,9 @@ static const struct dsa_switch_ops mt753 + .get_mac_eee = mt753x_get_mac_eee, + .set_mac_eee = mt753x_set_mac_eee, + }; ++EXPORT_SYMBOL_GPL(mt7530_switch_ops); + +-static const struct mt753x_info mt753x_table[] = { ++const struct mt753x_info mt753x_table[] = { + [ID_MT7621] = { + .id = ID_MT7621, + .pcs_ops = &mt7530_pcs_ops, +@@ -3149,16 +3035,9 @@ static const struct mt753x_info mt753x_t + .mac_port_config = mt7531_mac_config, + }, + }; ++EXPORT_SYMBOL_GPL(mt753x_table); + +-static const struct of_device_id mt7530_of_match[] = { +- { .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], }, +- { .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], }, +- { .compatible = "mediatek,mt7531", .data = &mt753x_table[ID_MT7531], }, +- { /* sentinel */ }, +-}; +-MODULE_DEVICE_TABLE(of, mt7530_of_match); +- +-static int ++int + mt7530_probe_common(struct mt7530_priv *priv) + { + struct device *dev = priv->dev; +@@ -3195,88 +3074,9 @@ mt7530_probe_common(struct mt7530_priv * + + return 0; + } ++EXPORT_SYMBOL_GPL(mt7530_probe_common); + +-static int +-mt7530_probe(struct mdio_device *mdiodev) +-{ +- static struct regmap_config *regmap_config; +- struct mt7530_priv *priv; +- struct device_node *dn; +- int ret; +- +- dn = mdiodev->dev.of_node; +- +- priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL); +- if (!priv) +- return -ENOMEM; +- +- priv->bus = mdiodev->bus; +- priv->dev = &mdiodev->dev; +- +- ret = mt7530_probe_common(priv); +- if (ret) +- return ret; +- +- /* Use medatek,mcm property to distinguish hardware type that would +- * cause a little bit differences on power-on sequence. +- * Not MCM that indicates switch works as the remote standalone +- * integrated circuit so the GPIO pin would be used to complete +- * the reset, otherwise memory-mapped register accessing used +- * through syscon provides in the case of MCM. +- */ +- priv->mcm = of_property_read_bool(dn, "mediatek,mcm"); +- if (priv->mcm) { +- dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n"); +- +- priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm"); +- if (IS_ERR(priv->rstc)) { +- dev_err(&mdiodev->dev, "Couldn't get our reset line\n"); +- return PTR_ERR(priv->rstc); +- } +- } else { +- priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset", +- GPIOD_OUT_LOW); +- if (IS_ERR(priv->reset)) { +- dev_err(&mdiodev->dev, "Couldn't get our reset line\n"); +- return PTR_ERR(priv->reset); +- } +- } +- +- if (priv->id == ID_MT7530) { +- priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core"); +- if (IS_ERR(priv->core_pwr)) +- return PTR_ERR(priv->core_pwr); +- +- priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io"); +- if (IS_ERR(priv->io_pwr)) +- return PTR_ERR(priv->io_pwr); +- } +- +- regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config), +- GFP_KERNEL); +- if (!regmap_config) +- return -ENOMEM; +- +- regmap_config->reg_bits = 16; +- regmap_config->val_bits = 32; +- regmap_config->reg_stride = 4; +- regmap_config->max_register = MT7530_CREV; +- regmap_config->disable_locking = true; +- priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, +- priv->bus, regmap_config); +- if (IS_ERR(priv->regmap)) +- return PTR_ERR(priv->regmap); +- +- if (priv->id == ID_MT7531) { +- ret = mt7531_create_sgmii(priv); +- if (ret) +- return ret; +- } +- +- return dsa_register_switch(priv->ds); +-} +- +-static void ++void + mt7530_remove_common(struct mt7530_priv *priv) + { + if (priv->irq) +@@ -3286,55 +3086,7 @@ mt7530_remove_common(struct mt7530_priv + + mutex_destroy(&priv->reg_mutex); + } +- +-static void +-mt7530_remove(struct mdio_device *mdiodev) +-{ +- struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); +- int ret = 0, i; +- +- if (!priv) +- return; +- +- ret = regulator_disable(priv->core_pwr); +- if (ret < 0) +- dev_err(priv->dev, +- "Failed to disable core power: %d\n", ret); +- +- ret = regulator_disable(priv->io_pwr); +- if (ret < 0) +- dev_err(priv->dev, "Failed to disable io pwr: %d\n", +- ret); +- +- mt7530_remove_common(priv); +- +- for (i = 0; i < 2; ++i) +- mtk_pcs_lynxi_destroy(priv->ports[5 + i].sgmii_pcs); +-} +- +-static void mt7530_shutdown(struct mdio_device *mdiodev) +-{ +- struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); +- +- if (!priv) +- return; +- +- dsa_switch_shutdown(priv->ds); +- +- dev_set_drvdata(&mdiodev->dev, NULL); +-} +- +-static struct mdio_driver mt7530_mdio_driver = { +- .probe = mt7530_probe, +- .remove = mt7530_remove, +- .shutdown = mt7530_shutdown, +- .mdiodrv.driver = { +- .name = "mt7530", +- .of_match_table = mt7530_of_match, +- }, +-}; +- +-mdio_module_driver(mt7530_mdio_driver); ++EXPORT_SYMBOL_GPL(mt7530_remove_common); + + MODULE_AUTHOR("Sean Wang "); + MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch"); +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -807,4 +807,10 @@ static inline void INIT_MT7530_DUMMY_POL + p->reg = reg; + } + ++int mt7530_probe_common(struct mt7530_priv *priv); ++void mt7530_remove_common(struct mt7530_priv *priv); ++ ++extern const struct dsa_switch_ops mt7530_switch_ops; ++extern const struct mt753x_info mt753x_table[]; ++ + #endif /* __MT7530_H */ diff --git a/target/linux/generic/backport-6.1/790-v6.4-0011-net-dsa-mt7530-skip-locking-if-MDIO-bus-isn-t-presen.patch b/target/linux/generic/backport-6.1/790-v6.4-0011-net-dsa-mt7530-skip-locking-if-MDIO-bus-isn-t-presen.patch new file mode 100644 index 00000000000000..01011ed1a001c4 --- /dev/null +++ b/target/linux/generic/backport-6.1/790-v6.4-0011-net-dsa-mt7530-skip-locking-if-MDIO-bus-isn-t-presen.patch @@ -0,0 +1,47 @@ +From a52cadbf76593f8fcb2f4f62cb006e3f2a22ad06 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Mon, 3 Apr 2023 02:19:28 +0100 +Subject: [PATCH 11/13] net: dsa: mt7530: skip locking if MDIO bus isn't + present + +As MT7530 and MT7531 internally use 32-bit wide registers, each access +to any register of the switch requires several operations on the MDIO +bus. Hence if there is congruent access, e.g. due to PCS or PHY +polling, this can mess up and interfere with another ongoing register +access sequence. + +However, the MDIO bus mutex is only relevant for MDIO-connected +switches. Prepare switches which have there registers directly mapped +into the SoCs register space via MMIO which do not require such +locking. There we can simply use regmap's default locking mechanism. + +Hence guard mutex operations to only be performed in case of MDIO +connected switches. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/mt7530.c | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -144,13 +144,15 @@ err: + static void + mt7530_mutex_lock(struct mt7530_priv *priv) + { +- mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); ++ if (priv->bus) ++ mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); + } + + static void + mt7530_mutex_unlock(struct mt7530_priv *priv) + { +- mutex_unlock(&priv->bus->mdio_lock); ++ if (priv->bus) ++ mutex_unlock(&priv->bus->mdio_lock); + } + + static void diff --git a/target/linux/generic/backport-6.1/790-v6.4-0012-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch b/target/linux/generic/backport-6.1/790-v6.4-0012-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch new file mode 100644 index 00000000000000..aeaf9f84678e57 --- /dev/null +++ b/target/linux/generic/backport-6.1/790-v6.4-0012-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch @@ -0,0 +1,421 @@ +From b361015763fedea439f13b336b15ef7bdf1f7d4f Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Mon, 3 Apr 2023 02:19:40 +0100 +Subject: [PATCH 12/13] net: dsa: mt7530: introduce driver for MT7988 built-in + switch + +Add driver for the built-in Gigabit Ethernet switch which can be found +in the MediaTek MT7988 SoC. + +The switch shares most of its design with MT7530 and MT7531, but has +it's registers mapped into the SoCs register space rather than being +connected externally or internally via MDIO. + +Introduce a new platform driver to support that. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + MAINTAINERS | 2 + + drivers/net/dsa/Kconfig | 12 +++ + drivers/net/dsa/Makefile | 1 + + drivers/net/dsa/mt7530-mmio.c | 101 +++++++++++++++++++++++++ + drivers/net/dsa/mt7530.c | 137 +++++++++++++++++++++++++++++++++- + drivers/net/dsa/mt7530.h | 12 +-- + 6 files changed, 255 insertions(+), 10 deletions(-) + create mode 100644 drivers/net/dsa/mt7530-mmio.c + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -13058,9 +13058,11 @@ MEDIATEK SWITCH DRIVER + M: Sean Wang + M: Landen Chao + M: DENG Qingfang ++M: Daniel Golle + L: netdev@vger.kernel.org + S: Maintained + F: drivers/net/dsa/mt7530-mdio.c ++F: drivers/net/dsa/mt7530-mmio.c + F: drivers/net/dsa/mt7530.* + F: net/dsa/tag_mtk.c + +--- a/drivers/net/dsa/Kconfig ++++ b/drivers/net/dsa/Kconfig +@@ -38,6 +38,7 @@ config NET_DSA_MT7530 + select NET_DSA_TAG_MTK + select MEDIATEK_GE_PHY + imply NET_DSA_MT7530_MDIO ++ imply NET_DSA_MT7530_MMIO + help + This enables support for the MediaTek MT7530 and MT7531 Ethernet + switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT, +@@ -54,6 +55,17 @@ config NET_DSA_MT7530_MDIO + module MT7530 which can be found in the MT7621AT, MT7621DAT, + MT7621ST and MT7623AI SoCs. + ++config NET_DSA_MT7530_MMIO ++ tristate "MediaTek MT7530 MMIO interface driver" ++ depends on NET_DSA_MT7530 ++ depends on HAS_IOMEM ++ help ++ This enables support for the built-in Ethernet switch found ++ in the MediaTek MT7988 SoC. ++ The switch is a similar design as MT7531, but the switch registers ++ are directly mapped into the SoCs register space rather than being ++ accessible via MDIO. ++ + config NET_DSA_MV88E6060 + tristate "Marvell 88E6060 ethernet switch chip support" + select NET_DSA_TAG_TRAILER +--- a/drivers/net/dsa/Makefile ++++ b/drivers/net/dsa/Makefile +@@ -8,6 +8,7 @@ endif + obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o + obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o + obj-$(CONFIG_NET_DSA_MT7530_MDIO) += mt7530-mdio.o ++obj-$(CONFIG_NET_DSA_MT7530_MMIO) += mt7530-mmio.o + obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o + obj-$(CONFIG_NET_DSA_RZN1_A5PSW) += rzn1_a5psw.o + obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o +--- /dev/null ++++ b/drivers/net/dsa/mt7530-mmio.c +@@ -0,0 +1,101 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "mt7530.h" ++ ++static const struct of_device_id mt7988_of_match[] = { ++ { .compatible = "mediatek,mt7988-switch", .data = &mt753x_table[ID_MT7988], }, ++ { /* sentinel */ }, ++}; ++MODULE_DEVICE_TABLE(of, mt7988_of_match); ++ ++static int ++mt7988_probe(struct platform_device *pdev) ++{ ++ static struct regmap_config *sw_regmap_config; ++ struct mt7530_priv *priv; ++ void __iomem *base_addr; ++ int ret; ++ ++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ priv->bus = NULL; ++ priv->dev = &pdev->dev; ++ ++ ret = mt7530_probe_common(priv); ++ if (ret) ++ return ret; ++ ++ priv->rstc = devm_reset_control_get(&pdev->dev, NULL); ++ if (IS_ERR(priv->rstc)) { ++ dev_err(&pdev->dev, "Couldn't get our reset line\n"); ++ return PTR_ERR(priv->rstc); ++ } ++ ++ base_addr = devm_platform_ioremap_resource(pdev, 0); ++ if (IS_ERR(base_addr)) { ++ dev_err(&pdev->dev, "cannot request I/O memory space\n"); ++ return -ENXIO; ++ } ++ ++ sw_regmap_config = devm_kzalloc(&pdev->dev, sizeof(*sw_regmap_config), GFP_KERNEL); ++ if (!sw_regmap_config) ++ return -ENOMEM; ++ ++ sw_regmap_config->name = "switch"; ++ sw_regmap_config->reg_bits = 16; ++ sw_regmap_config->val_bits = 32; ++ sw_regmap_config->reg_stride = 4; ++ sw_regmap_config->max_register = MT7530_CREV; ++ priv->regmap = devm_regmap_init_mmio(&pdev->dev, base_addr, sw_regmap_config); ++ if (IS_ERR(priv->regmap)) ++ return PTR_ERR(priv->regmap); ++ ++ return dsa_register_switch(priv->ds); ++} ++ ++static int ++mt7988_remove(struct platform_device *pdev) ++{ ++ struct mt7530_priv *priv = platform_get_drvdata(pdev); ++ ++ if (priv) ++ mt7530_remove_common(priv); ++ ++ return 0; ++} ++ ++static void mt7988_shutdown(struct platform_device *pdev) ++{ ++ struct mt7530_priv *priv = platform_get_drvdata(pdev); ++ ++ if (!priv) ++ return; ++ ++ dsa_switch_shutdown(priv->ds); ++ ++ dev_set_drvdata(&pdev->dev, NULL); ++} ++ ++static struct platform_driver mt7988_platform_driver = { ++ .probe = mt7988_probe, ++ .remove = mt7988_remove, ++ .shutdown = mt7988_shutdown, ++ .driver = { ++ .name = "mt7530-mmio", ++ .of_match_table = mt7988_of_match, ++ }, ++}; ++module_platform_driver(mt7988_platform_driver); ++ ++MODULE_AUTHOR("Daniel Golle "); ++MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch (MMIO)"); ++MODULE_LICENSE("GPL"); +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -1989,6 +1989,47 @@ static const struct irq_domain_ops mt753 + }; + + static void ++mt7988_irq_mask(struct irq_data *d) ++{ ++ struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); ++ ++ priv->irq_enable &= ~BIT(d->hwirq); ++ mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable); ++} ++ ++static void ++mt7988_irq_unmask(struct irq_data *d) ++{ ++ struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); ++ ++ priv->irq_enable |= BIT(d->hwirq); ++ mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable); ++} ++ ++static struct irq_chip mt7988_irq_chip = { ++ .name = KBUILD_MODNAME, ++ .irq_mask = mt7988_irq_mask, ++ .irq_unmask = mt7988_irq_unmask, ++}; ++ ++static int ++mt7988_irq_map(struct irq_domain *domain, unsigned int irq, ++ irq_hw_number_t hwirq) ++{ ++ irq_set_chip_data(irq, domain->host_data); ++ irq_set_chip_and_handler(irq, &mt7988_irq_chip, handle_simple_irq); ++ irq_set_nested_thread(irq, true); ++ irq_set_noprobe(irq); ++ ++ return 0; ++} ++ ++static const struct irq_domain_ops mt7988_irq_domain_ops = { ++ .map = mt7988_irq_map, ++ .xlate = irq_domain_xlate_onecell, ++}; ++ ++static void + mt7530_setup_mdio_irq(struct mt7530_priv *priv) + { + struct dsa_switch *ds = priv->ds; +@@ -2022,8 +2063,15 @@ mt7530_setup_irq(struct mt7530_priv *pri + return priv->irq ? : -EINVAL; + } + +- priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS, +- &mt7530_irq_domain_ops, priv); ++ if (priv->id == ID_MT7988) ++ priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS, ++ &mt7988_irq_domain_ops, ++ priv); ++ else ++ priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS, ++ &mt7530_irq_domain_ops, ++ priv); ++ + if (!priv->irq_domain) { + dev_err(dev, "failed to create IRQ domain\n"); + return -ENOMEM; +@@ -2520,6 +2568,25 @@ static void mt7531_mac_port_get_caps(str + } + } + ++static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port, ++ struct phylink_config *config) ++{ ++ phy_interface_zero(config->supported_interfaces); ++ ++ switch (port) { ++ case 0 ... 4: /* Internal phy */ ++ __set_bit(PHY_INTERFACE_MODE_INTERNAL, ++ config->supported_interfaces); ++ break; ++ ++ case 6: ++ __set_bit(PHY_INTERFACE_MODE_INTERNAL, ++ config->supported_interfaces); ++ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | ++ MAC_10000FD; ++ } ++} ++ + static int + mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state) + { +@@ -2596,6 +2663,17 @@ static bool mt753x_is_mac_port(u32 port) + } + + static int ++mt7988_mac_config(struct dsa_switch *ds, int port, unsigned int mode, ++ phy_interface_t interface) ++{ ++ if (dsa_is_cpu_port(ds, port) && ++ interface == PHY_INTERFACE_MODE_INTERNAL) ++ return 0; ++ ++ return -EINVAL; ++} ++ ++static int + mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, + phy_interface_t interface) + { +@@ -2665,7 +2743,8 @@ mt753x_phylink_mac_config(struct dsa_swi + + switch (port) { + case 0 ... 4: /* Internal phy */ +- if (state->interface != PHY_INTERFACE_MODE_GMII) ++ if (state->interface != PHY_INTERFACE_MODE_GMII && ++ state->interface != PHY_INTERFACE_MODE_INTERNAL) + goto unsupported; + break; + case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ +@@ -2743,7 +2822,8 @@ static void mt753x_phylink_mac_link_up(s + /* MT753x MAC works in 1G full duplex mode for all up-clocked + * variants. + */ +- if (interface == PHY_INTERFACE_MODE_TRGMII || ++ if (interface == PHY_INTERFACE_MODE_INTERNAL || ++ interface == PHY_INTERFACE_MODE_TRGMII || + (phy_interface_mode_is_8023z(interface))) { + speed = SPEED_1000; + duplex = DUPLEX_FULL; +@@ -2823,6 +2903,21 @@ mt7531_cpu_port_config(struct dsa_switch + return 0; + } + ++static int ++mt7988_cpu_port_config(struct dsa_switch *ds, int port) ++{ ++ struct mt7530_priv *priv = ds->priv; ++ ++ mt7530_write(priv, MT7530_PMCR_P(port), ++ PMCR_CPU_PORT_SETTING(priv->id)); ++ ++ mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, ++ PHY_INTERFACE_MODE_INTERNAL, NULL, ++ SPEED_10000, DUPLEX_FULL, true, true); ++ ++ return 0; ++} ++ + static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) + { +@@ -2968,6 +3063,27 @@ static int mt753x_set_mac_eee(struct dsa + return 0; + } + ++static int mt7988_pad_setup(struct dsa_switch *ds, phy_interface_t interface) ++{ ++ return 0; ++} ++ ++static int mt7988_setup(struct dsa_switch *ds) ++{ ++ struct mt7530_priv *priv = ds->priv; ++ ++ /* Reset the switch */ ++ reset_control_assert(priv->rstc); ++ usleep_range(20, 50); ++ reset_control_deassert(priv->rstc); ++ usleep_range(20, 50); ++ ++ /* Reset the switch PHYs */ ++ mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST); ++ ++ return mt7531_setup_common(ds); ++} ++ + const struct dsa_switch_ops mt7530_switch_ops = { + .get_tag_protocol = mtk_get_tag_protocol, + .setup = mt753x_setup, +@@ -3036,6 +3152,17 @@ const struct mt753x_info mt753x_table[] + .mac_port_get_caps = mt7531_mac_port_get_caps, + .mac_port_config = mt7531_mac_config, + }, ++ [ID_MT7988] = { ++ .id = ID_MT7988, ++ .pcs_ops = &mt7530_pcs_ops, ++ .sw_setup = mt7988_setup, ++ .phy_read = mt7531_ind_phy_read, ++ .phy_write = mt7531_ind_phy_write, ++ .pad_setup = mt7988_pad_setup, ++ .cpu_port_config = mt7988_cpu_port_config, ++ .mac_port_get_caps = mt7988_mac_port_get_caps, ++ .mac_port_config = mt7988_mac_config, ++ }, + }; + EXPORT_SYMBOL_GPL(mt753x_table); + +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -18,6 +18,7 @@ enum mt753x_id { + ID_MT7530 = 0, + ID_MT7621 = 1, + ID_MT7531 = 2, ++ ID_MT7988 = 3, + }; + + #define NUM_TRGMII_CTRL 5 +@@ -54,11 +55,11 @@ enum mt753x_id { + #define MT7531_MIRROR_PORT_SET(x) (((x) & MIRROR_MASK) << 16) + #define MT7531_CPU_PMAP_MASK GENMASK(7, 0) + +-#define MT753X_MIRROR_REG(id) (((id) == ID_MT7531) ? \ ++#define MT753X_MIRROR_REG(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \ + MT7531_CFC : MT7530_MFC) +-#define MT753X_MIRROR_EN(id) (((id) == ID_MT7531) ? \ ++#define MT753X_MIRROR_EN(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \ + MT7531_MIRROR_EN : MIRROR_EN) +-#define MT753X_MIRROR_MASK(id) (((id) == ID_MT7531) ? \ ++#define MT753X_MIRROR_MASK(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \ + MT7531_MIRROR_MASK : MIRROR_MASK) + + /* Registers for BPDU and PAE frame control*/ +@@ -295,9 +296,8 @@ enum mt7530_vlan_port_acc_frm { + MT7531_FORCE_DPX | \ + MT7531_FORCE_RX_FC | \ + MT7531_FORCE_TX_FC) +-#define PMCR_FORCE_MODE_ID(id) (((id) == ID_MT7531) ? \ +- MT7531_FORCE_MODE : \ +- PMCR_FORCE_MODE) ++#define PMCR_FORCE_MODE_ID(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \ ++ MT7531_FORCE_MODE : PMCR_FORCE_MODE) + #define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \ + PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \ + PMCR_TX_FC_EN | PMCR_RX_FC_EN | \ diff --git a/target/linux/generic/backport-6.1/790-v6.4-0013-net-dsa-mt7530-fix-support-for-MT7531BE.patch b/target/linux/generic/backport-6.1/790-v6.4-0013-net-dsa-mt7530-fix-support-for-MT7531BE.patch new file mode 100644 index 00000000000000..074472f6dcb09a --- /dev/null +++ b/target/linux/generic/backport-6.1/790-v6.4-0013-net-dsa-mt7530-fix-support-for-MT7531BE.patch @@ -0,0 +1,118 @@ +From eb1dd407b4be7ca38166a38c56c8edf52c6a399f Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Sun, 16 Apr 2023 13:08:14 +0100 +Subject: [PATCH 13/13] net: dsa: mt7530: fix support for MT7531BE +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +There are two variants of the MT7531 switch IC which got different +features (and pins) regarding port 5: + * MT7531AE: SGMII/1000Base-X/2500Base-X SerDes PCS + * MT7531BE: RGMII + +Moving the creation of the SerDes PCS from mt753x_setup to mt7530_probe +with commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation +to mt7530_probe function") works fine for MT7531AE which got two +instances of mtk-pcs-lynxi, however, MT7531BE requires mt7531_pll_setup +to setup clocks before the single PCS on port 6 (usually used as CPU +port) starts to work and hence the PCS creation failed on MT7531BE. + +Fix this by introducing a pointer to mt7531_create_sgmii function in +struct mt7530_priv and call it again at the end of mt753x_setup like it +was before commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS +creation to mt7530_probe function"). + +Fixes: 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to mt7530_probe function") +Signed-off-by: Daniel Golle +Acked-by: Arınç ÜNAL +Link: https://lore.kernel.org/r/ZDvlLhhqheobUvOK@makrotopia.org +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/mt7530-mdio.c | 16 ++++++++-------- + drivers/net/dsa/mt7530.c | 6 ++++++ + drivers/net/dsa/mt7530.h | 4 ++-- + 3 files changed, 16 insertions(+), 10 deletions(-) + +--- a/drivers/net/dsa/mt7530-mdio.c ++++ b/drivers/net/dsa/mt7530-mdio.c +@@ -81,14 +81,17 @@ static const struct regmap_bus mt7530_re + }; + + static int +-mt7531_create_sgmii(struct mt7530_priv *priv) ++mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii) + { +- struct regmap_config *mt7531_pcs_config[2]; ++ struct regmap_config *mt7531_pcs_config[2] = {}; + struct phylink_pcs *pcs; + struct regmap *regmap; + int i, ret = 0; + +- for (i = 0; i < 2; i++) { ++ /* MT7531AE has two SGMII units for port 5 and port 6 ++ * MT7531BE has only one SGMII unit for port 6 ++ */ ++ for (i = dual_sgmii ? 0 : 1; i < 2; i++) { + mt7531_pcs_config[i] = devm_kzalloc(priv->dev, + sizeof(struct regmap_config), + GFP_KERNEL); +@@ -208,11 +211,8 @@ mt7530_probe(struct mdio_device *mdiodev + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + +- if (priv->id == ID_MT7531) { +- ret = mt7531_create_sgmii(priv); +- if (ret) +- return ret; +- } ++ if (priv->id == ID_MT7531) ++ priv->create_sgmii = mt7531_create_sgmii; + + return dsa_register_switch(priv->ds); + } +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -3030,6 +3030,12 @@ mt753x_setup(struct dsa_switch *ds) + if (ret && priv->irq) + mt7530_free_irq_common(priv); + ++ if (priv->create_sgmii) { ++ ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv)); ++ if (ret && priv->irq) ++ mt7530_free_irq(priv); ++ } ++ + return ret; + } + +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -741,10 +741,10 @@ struct mt753x_info { + * registers + * @p6_interface Holding the current port 6 interface + * @p5_intf_sel: Holding the current port 5 interface select +- * + * @irq: IRQ number of the switch + * @irq_domain: IRQ domain of the switch irq_chip + * @irq_enable: IRQ enable bits, synced to SYS_INT_EN ++ * @create_sgmii: Pointer to function creating SGMII PCS instance(s) + */ + struct mt7530_priv { + struct device *dev; +@@ -763,7 +763,6 @@ struct mt7530_priv { + unsigned int p5_intf_sel; + u8 mirror_rx; + u8 mirror_tx; +- + struct mt7530_port ports[MT7530_NUM_PORTS]; + struct mt753x_pcs pcs[MT7530_NUM_PORTS]; + /* protect among processes for registers access*/ +@@ -771,6 +770,7 @@ struct mt7530_priv { + int irq; + struct irq_domain *irq_domain; + u32 irq_enable; ++ int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii); + }; + + struct mt7530_hw_vlan_entry { diff --git a/target/linux/generic/pending-6.1/723-net-mt7531-ensure-all-MACs-are-powered-down-before-r.patch b/target/linux/generic/pending-6.1/723-net-mt7531-ensure-all-MACs-are-powered-down-before-r.patch index 32c2ce1831db85..00a43e3e55187b 100644 --- a/target/linux/generic/pending-6.1/723-net-mt7531-ensure-all-MACs-are-powered-down-before-r.patch +++ b/target/linux/generic/pending-6.1/723-net-mt7531-ensure-all-MACs-are-powered-down-before-r.patch @@ -15,7 +15,7 @@ Signed-off-by: Alexander Couzens --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2212,6 +2212,10 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2236,6 +2236,10 @@ mt7530_setup(struct dsa_switch *ds) return -ENODEV; } diff --git a/target/linux/generic/pending-6.1/795-mt7530-register-OF-node-for-internal-MDIO-bus.patch b/target/linux/generic/pending-6.1/795-mt7530-register-OF-node-for-internal-MDIO-bus.patch index 201beb8d539839..26f40d9f87ba78 100644 --- a/target/linux/generic/pending-6.1/795-mt7530-register-OF-node-for-internal-MDIO-bus.patch +++ b/target/linux/generic/pending-6.1/795-mt7530-register-OF-node-for-internal-MDIO-bus.patch @@ -16,7 +16,7 @@ Signed-off-by: David Bauer --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2102,10 +2102,13 @@ mt7530_setup_mdio(struct mt7530_priv *pr +@@ -2126,10 +2126,13 @@ mt7530_setup_mdio(struct mt7530_priv *pr { struct dsa_switch *ds = priv->ds; struct device *dev = priv->dev; @@ -30,7 +30,7 @@ Signed-off-by: David Bauer bus = devm_mdiobus_alloc(dev); if (!bus) return -ENOMEM; -@@ -2122,7 +2125,9 @@ mt7530_setup_mdio(struct mt7530_priv *pr +@@ -2146,7 +2149,9 @@ mt7530_setup_mdio(struct mt7530_priv *pr if (priv->irq) mt7530_setup_mdio_irq(priv); From 4fa8c8b72fce204946f3f077e455738634b485f6 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Tue, 30 May 2023 02:46:18 +0100 Subject: [PATCH 3/4] kernel: include MT7988 Ethernet support in Linux 6.1 Import pending patches adding Ethernet support for MT7988 which are already present in pending-5.15 also to pending-6.1. Signed-off-by: Daniel Golle --- ..._eth_soc-add-MTK_NETSYS_V1-capabilit.patch | 223 ++ ..._eth_soc-move-MAX_DEVS-in-mtk_soc_da.patch | 181 ++ ..._eth_soc-rely-on-num_devs-and-remove.patch | 153 ++ ..._eth_soc-add-MTK_NETSYS_V3-capabilit.patch | 292 +++ ..._eth_soc-convert-caps-in-mtk_soc_dat.patch | 197 ++ ...k_eth_soc-add-support-for-MT7988-SoC.patch | 495 +++++ ..._eth_soc-add-paths-and-SerDes-modes-.patch | 1867 +++++++++++++++++ 7 files changed, 3408 insertions(+) create mode 100644 target/linux/generic/pending-6.1/737-01-net-ethernet-mtk_eth_soc-add-MTK_NETSYS_V1-capabilit.patch create mode 100644 target/linux/generic/pending-6.1/737-02-net-ethernet-mtk_eth_soc-move-MAX_DEVS-in-mtk_soc_da.patch create mode 100644 target/linux/generic/pending-6.1/737-03-net-ethernet-mtk_eth_soc-rely-on-num_devs-and-remove.patch create mode 100644 target/linux/generic/pending-6.1/737-04-net-ethernet-mtk_eth_soc-add-MTK_NETSYS_V3-capabilit.patch create mode 100644 target/linux/generic/pending-6.1/737-05-net-ethernet-mtk_eth_soc-convert-caps-in-mtk_soc_dat.patch create mode 100644 target/linux/generic/pending-6.1/737-06-net-ethernet-mtk_eth_soc-add-support-for-MT7988-SoC.patch create mode 100644 target/linux/generic/pending-6.1/737-07-net-ethernet-mtk_eth_soc-add-paths-and-SerDes-modes-.patch diff --git a/target/linux/generic/pending-6.1/737-01-net-ethernet-mtk_eth_soc-add-MTK_NETSYS_V1-capabilit.patch b/target/linux/generic/pending-6.1/737-01-net-ethernet-mtk_eth_soc-add-MTK_NETSYS_V1-capabilit.patch new file mode 100644 index 00000000000000..bf1bc78b23aec6 --- /dev/null +++ b/target/linux/generic/pending-6.1/737-01-net-ethernet-mtk_eth_soc-add-MTK_NETSYS_V1-capabilit.patch @@ -0,0 +1,223 @@ +From 663fa1b7e0cb2c929008482014a70c6625caad75 Mon Sep 17 00:00:00 2001 +From: Lorenzo Bianconi +Date: Tue, 7 Mar 2023 15:55:13 +0000 +Subject: [PATCH 1/7] net: ethernet: mtk_eth_soc: add MTK_NETSYS_V1 capability + bit + +Introduce MTK_NETSYS_V1 bit in the device capabilities for +MT7621/MT7622/MT7623/MT7628/MT7629 SoCs. +Use !MTK_NETSYS_V1 instead of MTK_NETSYS_V2 in the driver codebase. +This is a preliminary patch to introduce support for MT7988 SoC. + +Signed-off-by: Lorenzo Bianconi +Signed-off-by: Daniel Golle +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 30 +++++++------- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 45 ++++++++++++--------- + 2 files changed, 41 insertions(+), 34 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -640,7 +640,7 @@ static void mtk_set_queue_speed(struct m + FIELD_PREP(MTK_QTX_SCH_MIN_RATE_MAN, 1) | + FIELD_PREP(MTK_QTX_SCH_MIN_RATE_EXP, 4) | + MTK_QTX_SCH_LEAKY_BUCKET_SIZE; +- if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V1)) + val |= MTK_QTX_SCH_LEAKY_BUCKET_EN; + + if (IS_ENABLED(CONFIG_SOC_MT7621)) { +@@ -1018,7 +1018,7 @@ static bool mtk_rx_get_desc(struct mtk_e + rxd->rxd1 = READ_ONCE(dma_rxd->rxd1); + rxd->rxd3 = READ_ONCE(dma_rxd->rxd3); + rxd->rxd4 = READ_ONCE(dma_rxd->rxd4); +- if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) { ++ if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V1)) { + rxd->rxd5 = READ_ONCE(dma_rxd->rxd5); + rxd->rxd6 = READ_ONCE(dma_rxd->rxd6); + } +@@ -1076,7 +1076,7 @@ static int mtk_init_fq_dma(struct mtk_et + + txd->txd3 = TX_DMA_PLEN0(MTK_QDMA_PAGE_SIZE); + txd->txd4 = 0; +- if (MTK_HAS_CAPS(soc->caps, MTK_NETSYS_V2)) { ++ if (!MTK_HAS_CAPS(soc->caps, MTK_NETSYS_V1)) { + txd->txd5 = 0; + txd->txd6 = 0; + txd->txd7 = 0; +@@ -1267,7 +1267,7 @@ static void mtk_tx_set_dma_desc(struct n + struct mtk_mac *mac = netdev_priv(dev); + struct mtk_eth *eth = mac->hw; + +- if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) ++ if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V1)) + mtk_tx_set_dma_desc_v2(dev, txd, info); + else + mtk_tx_set_dma_desc_v1(dev, txd, info); +@@ -1950,7 +1950,7 @@ static int mtk_poll_rx(struct napi_struc + break; + + /* find out which mac the packet come from. values start at 1 */ +- if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) ++ if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V1)) + mac = RX_DMA_GET_SPORT_V2(trxd.rxd5) - 1; + else if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628) && + !(trxd.rxd4 & RX_DMA_SPECIAL_TAG)) +@@ -2046,7 +2046,7 @@ static int mtk_poll_rx(struct napi_struc + skb->dev = netdev; + bytes += skb->len; + +- if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) { ++ if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V1)) { + reason = FIELD_GET(MTK_RXD5_PPE_CPU_REASON, trxd.rxd5); + hash = trxd.rxd5 & MTK_RXD5_FOE_ENTRY; + if (hash != MTK_RXD5_FOE_ENTRY) +@@ -2071,7 +2071,7 @@ static int mtk_poll_rx(struct napi_struc + /* When using VLAN untagging in combination with DSA, the + * hardware treats the MTK special tag as a VLAN and untags it. + */ +- if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2) && ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V1) && + (trxd.rxd2 & RX_DMA_VTAG) && netdev_uses_dsa(netdev)) { + unsigned int port = RX_DMA_VPID(trxd.rxd3) & GENMASK(2, 0); + +@@ -2382,7 +2382,7 @@ static int mtk_tx_alloc(struct mtk_eth * + txd->txd2 = next_ptr; + txd->txd3 = TX_DMA_LS0 | TX_DMA_OWNER_CPU; + txd->txd4 = 0; +- if (MTK_HAS_CAPS(soc->caps, MTK_NETSYS_V2)) { ++ if (!MTK_HAS_CAPS(soc->caps, MTK_NETSYS_V1)) { + txd->txd5 = 0; + txd->txd6 = 0; + txd->txd7 = 0; +@@ -2435,7 +2435,7 @@ static int mtk_tx_alloc(struct mtk_eth * + FIELD_PREP(MTK_QTX_SCH_MIN_RATE_MAN, 1) | + FIELD_PREP(MTK_QTX_SCH_MIN_RATE_EXP, 4) | + MTK_QTX_SCH_LEAKY_BUCKET_SIZE; +- if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V1)) + val |= MTK_QTX_SCH_LEAKY_BUCKET_EN; + mtk_w32(eth, val, soc->reg_map->qdma.qtx_sch + ofs); + ofs += MTK_QTX_OFFSET; +@@ -2571,7 +2571,7 @@ static int mtk_rx_alloc(struct mtk_eth * + + rxd->rxd3 = 0; + rxd->rxd4 = 0; +- if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) { ++ if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V1)) { + rxd->rxd5 = 0; + rxd->rxd6 = 0; + rxd->rxd7 = 0; +@@ -3119,7 +3119,7 @@ static int mtk_start_dma(struct mtk_eth + MTK_TX_BT_32DWORDS | MTK_NDP_CO_PRO | + MTK_RX_2B_OFFSET | MTK_TX_WB_DDONE; + +- if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) ++ if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V1)) + val |= MTK_MUTLI_CNT | MTK_RESV_BUF | + MTK_WCOMP_EN | MTK_DMAD_WR_WDONE | + MTK_CHK_DDONE_EN | MTK_LEAKY_BUCKET_EN; +@@ -3529,7 +3529,7 @@ static void mtk_hw_reset(struct mtk_eth + { + u32 val; + +- if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) { ++ if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V1)) { + regmap_write(eth->ethsys, ETHSYS_FE_RST_CHK_IDLE_EN, 0); + val = RSTCTRL_PPE0_V2; + } else { +@@ -3541,7 +3541,7 @@ static void mtk_hw_reset(struct mtk_eth + + ethsys_reset(eth, RSTCTRL_ETH | RSTCTRL_FE | val); + +- if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) ++ if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V1)) + regmap_write(eth->ethsys, ETHSYS_FE_RST_CHK_IDLE_EN, + 0x3ffffff); + } +@@ -3737,7 +3737,7 @@ static int mtk_hw_init(struct mtk_eth *e + else + mtk_hw_reset(eth); + +- if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) { ++ if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V1)) { + /* Set FE to PDMAv2 if necessary */ + val = mtk_r32(eth, MTK_FE_GLO_MISC); + mtk_w32(eth, val | BIT(4), MTK_FE_GLO_MISC); +@@ -3774,7 +3774,7 @@ static int mtk_hw_init(struct mtk_eth *e + */ + val = mtk_r32(eth, MTK_CDMQ_IG_CTRL); + mtk_w32(eth, val | MTK_CDMQ_STAG_EN, MTK_CDMQ_IG_CTRL); +- if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) { ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V1)) { + val = mtk_r32(eth, MTK_CDMP_IG_CTRL); + mtk_w32(eth, val | MTK_CDMP_STAG_EN, MTK_CDMP_IG_CTRL); + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -819,6 +819,7 @@ enum mkt_eth_capabilities { + MTK_SHARED_INT_BIT, + MTK_TRGMII_MT7621_CLK_BIT, + MTK_QDMA_BIT, ++ MTK_NETSYS_V1_BIT, + MTK_NETSYS_V2_BIT, + MTK_SOC_MT7628_BIT, + MTK_RSTCTRL_PPE1_BIT, +@@ -854,6 +855,7 @@ enum mkt_eth_capabilities { + #define MTK_SHARED_INT BIT(MTK_SHARED_INT_BIT) + #define MTK_TRGMII_MT7621_CLK BIT(MTK_TRGMII_MT7621_CLK_BIT) + #define MTK_QDMA BIT(MTK_QDMA_BIT) ++#define MTK_NETSYS_V1 BIT(MTK_NETSYS_V1_BIT) + #define MTK_NETSYS_V2 BIT(MTK_NETSYS_V2_BIT) + #define MTK_SOC_MT7628 BIT(MTK_SOC_MT7628_BIT) + #define MTK_RSTCTRL_PPE1 BIT(MTK_RSTCTRL_PPE1_BIT) +@@ -916,25 +918,30 @@ enum mkt_eth_capabilities { + + #define MTK_HAS_CAPS(caps, _x) (((caps) & (_x) & ~(MTK_CAP_MASK)) == (_x)) + +-#define MT7621_CAPS (MTK_GMAC1_RGMII | MTK_GMAC1_TRGMII | \ +- MTK_GMAC2_RGMII | MTK_SHARED_INT | \ +- MTK_TRGMII_MT7621_CLK | MTK_QDMA) +- +-#define MT7622_CAPS (MTK_GMAC1_RGMII | MTK_GMAC1_SGMII | MTK_GMAC2_RGMII | \ +- MTK_GMAC2_SGMII | MTK_GDM1_ESW | \ +- MTK_MUX_GDM1_TO_GMAC1_ESW | \ +- MTK_MUX_GMAC1_GMAC2_TO_SGMII_RGMII | MTK_QDMA) +- +-#define MT7623_CAPS (MTK_GMAC1_RGMII | MTK_GMAC1_TRGMII | MTK_GMAC2_RGMII | \ +- MTK_QDMA) +- +-#define MT7628_CAPS (MTK_SHARED_INT | MTK_SOC_MT7628) +- +-#define MT7629_CAPS (MTK_GMAC1_SGMII | MTK_GMAC2_SGMII | MTK_GMAC2_GEPHY | \ +- MTK_GDM1_ESW | MTK_MUX_GDM1_TO_GMAC1_ESW | \ +- MTK_MUX_GMAC2_GMAC0_TO_GEPHY | \ +- MTK_MUX_U3_GMAC2_TO_QPHY | \ +- MTK_MUX_GMAC12_TO_GEPHY_SGMII | MTK_QDMA) ++#define MT7621_CAPS (MTK_GMAC1_RGMII | MTK_GMAC1_TRGMII | \ ++ MTK_GMAC2_RGMII | MTK_SHARED_INT | \ ++ MTK_TRGMII_MT7621_CLK | MTK_QDMA | \ ++ MTK_NETSYS_V1) ++ ++#define MT7622_CAPS (MTK_GMAC1_RGMII | MTK_GMAC1_SGMII | \ ++ MTK_GMAC2_RGMII | MTK_GMAC2_SGMII | \ ++ MTK_GDM1_ESW | MTK_MUX_GDM1_TO_GMAC1_ESW |\ ++ MTK_MUX_GMAC1_GMAC2_TO_SGMII_RGMII | \ ++ MTK_QDMA | MTK_NETSYS_V1) ++ ++#define MT7623_CAPS (MTK_GMAC1_RGMII | MTK_GMAC1_TRGMII | \ ++ MTK_GMAC2_RGMII | MTK_QDMA | \ ++ MTK_NETSYS_V1) ++ ++#define MT7628_CAPS (MTK_SHARED_INT | MTK_SOC_MT7628 | \ ++ MTK_NETSYS_V1) ++ ++#define MT7629_CAPS (MTK_GMAC1_SGMII | MTK_GMAC2_SGMII | \ ++ MTK_GMAC2_GEPHY | MTK_GDM1_ESW | \ ++ MTK_MUX_GMAC2_GMAC0_TO_GEPHY | MTK_QDMA | \ ++ MTK_MUX_U3_GMAC2_TO_QPHY | MTK_NETSYS_V1 |\ ++ MTK_MUX_GDM1_TO_GMAC1_ESW | \ ++ MTK_MUX_GMAC12_TO_GEPHY_SGMII) + + #define MT7981_CAPS (MTK_GMAC1_SGMII | MTK_GMAC2_SGMII | MTK_GMAC2_GEPHY | \ + MTK_MUX_GMAC12_TO_GEPHY_SGMII | MTK_QDMA | \ diff --git a/target/linux/generic/pending-6.1/737-02-net-ethernet-mtk_eth_soc-move-MAX_DEVS-in-mtk_soc_da.patch b/target/linux/generic/pending-6.1/737-02-net-ethernet-mtk_eth_soc-move-MAX_DEVS-in-mtk_soc_da.patch new file mode 100644 index 00000000000000..82848a7c972425 --- /dev/null +++ b/target/linux/generic/pending-6.1/737-02-net-ethernet-mtk_eth_soc-move-MAX_DEVS-in-mtk_soc_da.patch @@ -0,0 +1,181 @@ +From 5af2b2dc4d6ba0ff7696e79f18e5b2bf862194eb Mon Sep 17 00:00:00 2001 +From: Lorenzo Bianconi +Date: Tue, 7 Mar 2023 15:55:24 +0000 +Subject: [PATCH 2/7] net: ethernet: mtk_eth_soc: move MAX_DEVS in mtk_soc_data + +This is a preliminary patch to add MT7988 SoC support since it runs 3 +macs instead of 2. + +Signed-off-by: Lorenzo Bianconi +Signed-off-by: Daniel Golle +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 34 +++++++++++++++++++-- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 11 +++---- + 2 files changed, 36 insertions(+), 9 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -4043,7 +4043,10 @@ static void mtk_sgmii_destroy(struct mtk + { + int i; + +- for (i = 0; i < MTK_MAX_DEVS; i++) ++ if (!eth->sgmii_pcs) ++ return; ++ ++ for (i = 0; i < eth->soc->num_devs; i++) + mtk_pcs_lynxi_destroy(eth->sgmii_pcs[i]); + } + +@@ -4486,7 +4489,12 @@ static int mtk_sgmii_init(struct mtk_eth + u32 flags; + int i; + +- for (i = 0; i < MTK_MAX_DEVS; i++) { ++ eth->sgmii_pcs = devm_kzalloc(eth->dev, ++ sizeof(*eth->sgmii_pcs) * ++ eth->soc->num_devs, ++ GFP_KERNEL); ++ ++ for (i = 0; i < eth->soc->num_devs; i++) { + np = of_parse_phandle(eth->dev->of_node, "mediatek,sgmiisys", i); + if (!np) + break; +@@ -4531,6 +4539,18 @@ static int mtk_probe(struct platform_dev + if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) + eth->ip_align = NET_IP_ALIGN; + ++ eth->netdev = devm_kzalloc(eth->dev, ++ sizeof(*eth->netdev) * eth->soc->num_devs, ++ GFP_KERNEL); ++ if (!eth->netdev) ++ return -ENOMEM; ++ ++ eth->mac = devm_kzalloc(eth->dev, ++ sizeof(*eth->mac) * eth->soc->num_devs, ++ GFP_KERNEL); ++ if (!eth->mac) ++ return -ENOMEM; ++ + spin_lock_init(ð->page_lock); + spin_lock_init(ð->tx_irq_lock); + spin_lock_init(ð->rx_irq_lock); +@@ -4716,7 +4736,7 @@ static int mtk_probe(struct platform_dev + goto err_deinit_ppe; + } + +- for (i = 0; i < MTK_MAX_DEVS; i++) { ++ for (i = 0; i < eth->soc->num_devs; i++) { + if (!eth->netdev[i]) + continue; + +@@ -4792,6 +4812,7 @@ static const struct mtk_soc_data mt2701_ + .hw_features = MTK_HW_FEATURES, + .required_clks = MT7623_CLKS_BITMAP, + .required_pctl = true, ++ .num_devs = 2, + .txrx = { + .txd_size = sizeof(struct mtk_tx_dma), + .rxd_size = sizeof(struct mtk_rx_dma), +@@ -4810,6 +4831,7 @@ static const struct mtk_soc_data mt7621_ + .required_pctl = false, + .offload_version = 1, + .hash_offset = 2, ++ .num_devs = 2, + .foe_entry_size = sizeof(struct mtk_foe_entry) - 16, + .txrx = { + .txd_size = sizeof(struct mtk_tx_dma), +@@ -4831,6 +4853,7 @@ static const struct mtk_soc_data mt7622_ + .offload_version = 2, + .hash_offset = 2, + .has_accounting = true, ++ .num_devs = 2, + .foe_entry_size = sizeof(struct mtk_foe_entry) - 16, + .txrx = { + .txd_size = sizeof(struct mtk_tx_dma), +@@ -4850,6 +4873,7 @@ static const struct mtk_soc_data mt7623_ + .required_pctl = true, + .offload_version = 1, + .hash_offset = 2, ++ .num_devs = 2, + .foe_entry_size = sizeof(struct mtk_foe_entry) - 16, + .txrx = { + .txd_size = sizeof(struct mtk_tx_dma), +@@ -4869,6 +4893,7 @@ static const struct mtk_soc_data mt7629_ + .required_clks = MT7629_CLKS_BITMAP, + .required_pctl = false, + .has_accounting = true, ++ .num_devs = 2, + .txrx = { + .txd_size = sizeof(struct mtk_tx_dma), + .rxd_size = sizeof(struct mtk_rx_dma), +@@ -4890,6 +4915,7 @@ static const struct mtk_soc_data mt7981_ + .hash_offset = 4, + .foe_entry_size = sizeof(struct mtk_foe_entry), + .has_accounting = true, ++ .num_devs = 2, + .txrx = { + .txd_size = sizeof(struct mtk_tx_dma_v2), + .rxd_size = sizeof(struct mtk_rx_dma_v2), +@@ -4908,6 +4934,7 @@ static const struct mtk_soc_data mt7986_ + .required_clks = MT7986_CLKS_BITMAP, + .required_pctl = false, + .hash_offset = 4, ++ .num_devs = 2, + .foe_entry_size = sizeof(struct mtk_foe_entry), + .has_accounting = true, + .txrx = { +@@ -4926,6 +4953,7 @@ static const struct mtk_soc_data rt5350_ + .hw_features = MTK_HW_FEATURES_MT7628, + .required_clks = MT7628_CLKS_BITMAP, + .required_pctl = false, ++ .num_devs = 2, + .txrx = { + .txd_size = sizeof(struct mtk_tx_dma), + .rxd_size = sizeof(struct mtk_rx_dma), +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -1021,6 +1021,7 @@ struct mtk_reg_map { + * @required_pctl A bool value to show whether the SoC requires + * the extra setup for those pins used by GMAC. + * @hash_offset Flow table hash offset. ++ * @num_devs SoC number of macs. + * @foe_entry_size Foe table entry size. + * @has_accounting Bool indicating support for accounting of + * offloaded flows. +@@ -1039,6 +1040,7 @@ struct mtk_soc_data { + bool required_pctl; + u8 offload_version; + u8 hash_offset; ++ u8 num_devs; + u16 foe_entry_size; + netdev_features_t hw_features; + bool has_accounting; +@@ -1054,9 +1056,6 @@ struct mtk_soc_data { + + #define MTK_DMA_MONITOR_TIMEOUT msecs_to_jiffies(1000) + +-/* currently no SoC has more than 2 macs */ +-#define MTK_MAX_DEVS 2 +- + /* struct mtk_eth - This is the main datasructure for holding the state + * of the driver + * @dev: The device pointer +@@ -1111,14 +1110,14 @@ struct mtk_eth { + spinlock_t tx_irq_lock; + spinlock_t rx_irq_lock; + struct net_device dummy_dev; +- struct net_device *netdev[MTK_MAX_DEVS]; +- struct mtk_mac *mac[MTK_MAX_DEVS]; ++ struct net_device **netdev; ++ struct mtk_mac **mac; + int irq[3]; + u32 msg_enable; + unsigned long sysclk; + struct regmap *ethsys; + struct regmap *infra; +- struct phylink_pcs *sgmii_pcs[MTK_MAX_DEVS]; ++ struct phylink_pcs **sgmii_pcs; + struct regmap *pctl; + bool hwlro; + refcount_t dma_refcnt; diff --git a/target/linux/generic/pending-6.1/737-03-net-ethernet-mtk_eth_soc-rely-on-num_devs-and-remove.patch b/target/linux/generic/pending-6.1/737-03-net-ethernet-mtk_eth_soc-rely-on-num_devs-and-remove.patch new file mode 100644 index 00000000000000..be12aa5c06672e --- /dev/null +++ b/target/linux/generic/pending-6.1/737-03-net-ethernet-mtk_eth_soc-rely-on-num_devs-and-remove.patch @@ -0,0 +1,153 @@ +From 4e35e80750b33727e606be9e7ce447bde2e0deb7 Mon Sep 17 00:00:00 2001 +From: Lorenzo Bianconi +Date: Tue, 7 Mar 2023 15:55:35 +0000 +Subject: [PATCH 3/7] net: ethernet: mtk_eth_soc: rely on num_devs and remove + MTK_MAC_COUNT + +Get rid of MTK_MAC_COUNT since it is a duplicated of eth->soc->num_devs. + +Signed-off-by: Lorenzo Bianconi +Signed-off-by: Daniel Golle +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 30 ++++++++++----------- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 - + 2 files changed, 15 insertions(+), 16 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -944,7 +944,7 @@ static void mtk_stats_update(struct mtk_ + { + int i; + +- for (i = 0; i < MTK_MAC_COUNT; i++) { ++ for (i = 0; i < eth->soc->num_devs; i++) { + if (!eth->mac[i] || !eth->mac[i]->hw_stats) + continue; + if (spin_trylock(ð->mac[i]->hw_stats->stats_lock)) { +@@ -1449,7 +1449,7 @@ static int mtk_queue_stopped(struct mtk_ + { + int i; + +- for (i = 0; i < MTK_MAC_COUNT; i++) { ++ for (i = 0; i < eth->soc->num_devs; i++) { + if (!eth->netdev[i]) + continue; + if (netif_queue_stopped(eth->netdev[i])) +@@ -1463,7 +1463,7 @@ static void mtk_wake_queue(struct mtk_et + { + int i; + +- for (i = 0; i < MTK_MAC_COUNT; i++) { ++ for (i = 0; i < eth->soc->num_devs; i++) { + if (!eth->netdev[i]) + continue; + netif_tx_wake_all_queues(eth->netdev[i]); +@@ -1956,7 +1956,7 @@ static int mtk_poll_rx(struct napi_struc + !(trxd.rxd4 & RX_DMA_SPECIAL_TAG)) + mac = RX_DMA_GET_SPORT(trxd.rxd4) - 1; + +- if (unlikely(mac < 0 || mac >= MTK_MAC_COUNT || ++ if (unlikely(mac < 0 || mac >= eth->soc->num_devs || + !eth->netdev[mac])) + goto release_desc; + +@@ -2993,7 +2993,7 @@ static void mtk_dma_free(struct mtk_eth + const struct mtk_soc_data *soc = eth->soc; + int i; + +- for (i = 0; i < MTK_MAC_COUNT; i++) ++ for (i = 0; i < soc->num_devs; i++) + if (eth->netdev[i]) + netdev_reset_queue(eth->netdev[i]); + if (eth->scratch_ring) { +@@ -3147,7 +3147,7 @@ static void mtk_gdm_config(struct mtk_et + if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) + return; + +- for (i = 0; i < MTK_MAC_COUNT; i++) { ++ for (i = 0; i < eth->soc->num_devs; i++) { + u32 val = mtk_r32(eth, MTK_GDMA_FWD_CFG(i)); + + /* default setup the forward port to send frame to PDMA */ +@@ -3758,7 +3758,7 @@ static int mtk_hw_init(struct mtk_eth *e + * up with the more appropriate value when mtk_mac_config call is being + * invoked. + */ +- for (i = 0; i < MTK_MAC_COUNT; i++) { ++ for (i = 0; i < eth->soc->num_devs; i++) { + struct net_device *dev = eth->netdev[i]; + + mtk_w32(eth, MAC_MCR_FORCE_LINK_DOWN, MTK_MAC_MCR(i)); +@@ -3963,7 +3963,7 @@ static void mtk_pending_work(struct work + mtk_prepare_for_reset(eth); + + /* stop all devices to make sure that dma is properly shut down */ +- for (i = 0; i < MTK_MAC_COUNT; i++) { ++ for (i = 0; i < eth->soc->num_devs; i++) { + if (!eth->netdev[i] || !netif_running(eth->netdev[i])) + continue; + +@@ -3979,7 +3979,7 @@ static void mtk_pending_work(struct work + mtk_hw_init(eth, true); + + /* restart DMA and enable IRQs */ +- for (i = 0; i < MTK_MAC_COUNT; i++) { ++ for (i = 0; i < eth->soc->num_devs; i++) { + if (!test_bit(i, &restart)) + continue; + +@@ -4007,7 +4007,7 @@ static int mtk_free_dev(struct mtk_eth * + { + int i; + +- for (i = 0; i < MTK_MAC_COUNT; i++) { ++ for (i = 0; i < eth->soc->num_devs; i++) { + if (!eth->netdev[i]) + continue; + free_netdev(eth->netdev[i]); +@@ -4026,7 +4026,7 @@ static int mtk_unreg_dev(struct mtk_eth + { + int i; + +- for (i = 0; i < MTK_MAC_COUNT; i++) { ++ for (i = 0; i < eth->soc->num_devs; i++) { + struct mtk_mac *mac; + if (!eth->netdev[i]) + continue; +@@ -4331,7 +4331,7 @@ static int mtk_add_mac(struct mtk_eth *e + } + + id = be32_to_cpup(_id); +- if (id >= MTK_MAC_COUNT) { ++ if (id >= eth->soc->num_devs) { + dev_err(eth->dev, "%d is not a valid mac id\n", id); + return -EINVAL; + } +@@ -4461,7 +4461,7 @@ void mtk_eth_set_dma_device(struct mtk_e + + rtnl_lock(); + +- for (i = 0; i < MTK_MAC_COUNT; i++) { ++ for (i = 0; i < eth->soc->num_devs; i++) { + dev = eth->netdev[i]; + + if (!dev || !(dev->flags & IFF_UP)) +@@ -4787,7 +4787,7 @@ static int mtk_remove(struct platform_de + int i; + + /* stop all devices to make sure that dma is properly shut down */ +- for (i = 0; i < MTK_MAC_COUNT; i++) { ++ for (i = 0; i < eth->soc->num_devs; i++) { + if (!eth->netdev[i]) + continue; + mtk_stop(eth->netdev[i]); +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -33,7 +33,6 @@ + #define MTK_TX_DMA_BUF_LEN_V2 0xffff + #define MTK_QDMA_RING_SIZE 2048 + #define MTK_DMA_SIZE 512 +-#define MTK_MAC_COUNT 2 + #define MTK_RX_ETH_HLEN (VLAN_ETH_HLEN + ETH_FCS_LEN) + #define MTK_RX_HLEN (NET_SKB_PAD + MTK_RX_ETH_HLEN + NET_IP_ALIGN) + #define MTK_DMA_DUMMY_DESC 0xffffffff diff --git a/target/linux/generic/pending-6.1/737-04-net-ethernet-mtk_eth_soc-add-MTK_NETSYS_V3-capabilit.patch b/target/linux/generic/pending-6.1/737-04-net-ethernet-mtk_eth_soc-add-MTK_NETSYS_V3-capabilit.patch new file mode 100644 index 00000000000000..a383a5e4ef8808 --- /dev/null +++ b/target/linux/generic/pending-6.1/737-04-net-ethernet-mtk_eth_soc-add-MTK_NETSYS_V3-capabilit.patch @@ -0,0 +1,292 @@ +From ab817f559d505329d8a413c7d29250f6d87d77a0 Mon Sep 17 00:00:00 2001 +From: Lorenzo Bianconi +Date: Tue, 7 Mar 2023 15:55:47 +0000 +Subject: [PATCH 4/7] net: ethernet: mtk_eth_soc: add MTK_NETSYS_V3 capability + bit + +Introduce MTK_NETSYS_V3 bit in the device capabilities. +This is a preliminary patch to introduce support for MT7988 SoC. + +Signed-off-by: Lorenzo Bianconi +Signed-off-by: Daniel Golle +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 115 ++++++++++++++++---- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 44 +++++++- + 2 files changed, 134 insertions(+), 25 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -924,17 +924,32 @@ void mtk_stats_update_mac(struct mtk_mac + mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x20 + offs); + hw_stats->rx_flow_control_packets += + mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x24 + offs); +- hw_stats->tx_skip += +- mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x28 + offs); +- hw_stats->tx_collisions += +- mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x2c + offs); +- hw_stats->tx_bytes += +- mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x30 + offs); +- stats = mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x34 + offs); +- if (stats) +- hw_stats->tx_bytes += (stats << 32); +- hw_stats->tx_packets += +- mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x38 + offs); ++ ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V3)) { ++ hw_stats->tx_skip += ++ mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x50 + offs); ++ hw_stats->tx_collisions += ++ mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x54 + offs); ++ hw_stats->tx_bytes += ++ mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x40 + offs); ++ stats = mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x44 + offs); ++ if (stats) ++ hw_stats->tx_bytes += (stats << 32); ++ hw_stats->tx_packets += ++ mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x48 + offs); ++ } else { ++ hw_stats->tx_skip += ++ mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x28 + offs); ++ hw_stats->tx_collisions += ++ mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x2c + offs); ++ hw_stats->tx_bytes += ++ mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x30 + offs); ++ stats = mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x34 + offs); ++ if (stats) ++ hw_stats->tx_bytes += (stats << 32); ++ hw_stats->tx_packets += ++ mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x38 + offs); ++ } + } + + u64_stats_update_end(&hw_stats->syncp); +@@ -1238,7 +1253,10 @@ static void mtk_tx_set_dma_desc_v2(struc + data |= TX_DMA_LS0; + WRITE_ONCE(desc->txd3, data); + +- data = (mac->id + 1) << TX_DMA_FPORT_SHIFT_V2; /* forward port */ ++ if (mac->id == MTK_GMAC3_ID) ++ data = PSE_GDM3_PORT; ++ else ++ data = (mac->id + 1) << TX_DMA_FPORT_SHIFT_V2; /* forward port */ + data |= TX_DMA_SWC_V2 | QID_BITS_V2(info->qid); + WRITE_ONCE(desc->txd4, data); + +@@ -1249,6 +1267,9 @@ static void mtk_tx_set_dma_desc_v2(struc + /* tx checksum offload */ + if (info->csum) + data |= TX_DMA_CHKSUM_V2; ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V3) && ++ netdev_uses_dsa(dev)) ++ data |= TX_DMA_SPTAG_V3; + } + WRITE_ONCE(desc->txd5, data); + +@@ -1314,8 +1335,13 @@ static int mtk_tx_map(struct sk_buff *sk + mtk_tx_set_dma_desc(dev, itxd, &txd_info); + + itx_buf->flags |= MTK_TX_FLAGS_SINGLE0; +- itx_buf->flags |= (!mac->id) ? MTK_TX_FLAGS_FPORT0 : +- MTK_TX_FLAGS_FPORT1; ++ if (mac->id == MTK_GMAC1_ID) ++ itx_buf->flags |= MTK_TX_FLAGS_FPORT0; ++ else if (mac->id == MTK_GMAC2_ID) ++ itx_buf->flags |= MTK_TX_FLAGS_FPORT1; ++ else ++ itx_buf->flags |= MTK_TX_FLAGS_FPORT2; ++ + setup_tx_buf(eth, itx_buf, itxd_pdma, txd_info.addr, txd_info.size, + k++); + +@@ -1363,8 +1389,13 @@ static int mtk_tx_map(struct sk_buff *sk + memset(tx_buf, 0, sizeof(*tx_buf)); + tx_buf->data = (void *)MTK_DMA_DUMMY_DESC; + tx_buf->flags |= MTK_TX_FLAGS_PAGE0; +- tx_buf->flags |= (!mac->id) ? MTK_TX_FLAGS_FPORT0 : +- MTK_TX_FLAGS_FPORT1; ++ ++ if (mac->id == MTK_GMAC1_ID) ++ tx_buf->flags |= MTK_TX_FLAGS_FPORT0; ++ else if (mac->id == MTK_GMAC2_ID) ++ tx_buf->flags |= MTK_TX_FLAGS_FPORT1; ++ else ++ tx_buf->flags |= MTK_TX_FLAGS_FPORT2; + + setup_tx_buf(eth, tx_buf, txd_pdma, txd_info.addr, + txd_info.size, k++); +@@ -1950,11 +1981,24 @@ static int mtk_poll_rx(struct napi_struc + break; + + /* find out which mac the packet come from. values start at 1 */ +- if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V1)) +- mac = RX_DMA_GET_SPORT_V2(trxd.rxd5) - 1; +- else if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628) && +- !(trxd.rxd4 & RX_DMA_SPECIAL_TAG)) ++ if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V1)) { ++ u32 val = RX_DMA_GET_SPORT_V2(trxd.rxd5); ++ ++ switch (val) { ++ case PSE_GDM1_PORT: ++ case PSE_GDM2_PORT: ++ mac = val - 1; ++ break; ++ case PSE_GDM3_PORT: ++ mac = MTK_GMAC3_ID; ++ break; ++ default: ++ break; ++ } ++ } else if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628) && ++ !(trxd.rxd4 & RX_DMA_SPECIAL_TAG)) { + mac = RX_DMA_GET_SPORT(trxd.rxd4) - 1; ++ } + + if (unlikely(mac < 0 || mac >= eth->soc->num_devs || + !eth->netdev[mac])) +@@ -2185,7 +2229,9 @@ static int mtk_poll_tx_qdma(struct mtk_e + tx_buf = mtk_desc_to_tx_buf(ring, desc, + eth->soc->txrx.txd_size); + if (tx_buf->flags & MTK_TX_FLAGS_FPORT1) +- mac = 1; ++ mac = MTK_GMAC2_ID; ++ else if (tx_buf->flags & MTK_TX_FLAGS_FPORT2) ++ mac = MTK_GMAC3_ID; + + if (!tx_buf->data) + break; +@@ -3796,7 +3842,26 @@ static int mtk_hw_init(struct mtk_eth *e + mtk_w32(eth, eth->soc->txrx.rx_irq_done_mask, reg_map->qdma.int_grp + 4); + mtk_w32(eth, 0x21021000, MTK_FE_INT_GRP); + +- if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) { ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V3)) { ++ /* PSE should not drop port1, port8 and port9 packets */ ++ mtk_w32(eth, 0x00000302, PSE_DROP_CFG); ++ ++ /* GDM and CDM Threshold */ ++ mtk_w32(eth, 0x00000707, MTK_CDMW0_THRES); ++ mtk_w32(eth, 0x00000077, MTK_CDMW1_THRES); ++ ++ /* Disable GDM1 RX CRC stripping */ ++ val = mtk_r32(eth, MTK_GDMA_FWD_CFG(0)); ++ val &= ~MTK_GDMA_STRP_CRC; ++ mtk_w32(eth, val, MTK_GDMA_FWD_CFG(0)); ++ ++ /* PSE GDM3 MIB counter has incorrect hw default values, ++ * so the driver ought to read clear the values beforehand ++ * in case ethtool retrieve wrong mib values. ++ */ ++ for (i = 0; i < 0x80; i += 0x4) ++ mtk_r32(eth, reg_map->gdm1_cnt + 0x100 + i); ++ } else if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) { + /* PSE should not drop port8 and port9 packets from WDMA Tx */ + mtk_w32(eth, 0x00000300, PSE_DROP_CFG); + +@@ -4368,7 +4433,11 @@ static int mtk_add_mac(struct mtk_eth *e + } + spin_lock_init(&mac->hw_stats->stats_lock); + u64_stats_init(&mac->hw_stats->syncp); +- mac->hw_stats->reg_offset = id * MTK_STAT_OFFSET; ++ ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V3)) ++ mac->hw_stats->reg_offset = id * 0x80; ++ else ++ mac->hw_stats->reg_offset = id * 0x40; + + /* phylink create */ + err = of_get_phy_mode(np, &phy_mode); +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -121,6 +121,7 @@ + #define MTK_GDMA_ICS_EN BIT(22) + #define MTK_GDMA_TCS_EN BIT(21) + #define MTK_GDMA_UCS_EN BIT(20) ++#define MTK_GDMA_STRP_CRC BIT(16) + #define MTK_GDMA_TO_PDMA 0x0 + #define MTK_GDMA_DROP_ALL 0x7777 + +@@ -286,8 +287,6 @@ + /* QDMA Interrupt grouping registers */ + #define MTK_RLS_DONE_INT BIT(0) + +-#define MTK_STAT_OFFSET 0x40 +- + /* QDMA TX NUM */ + #define QID_BITS_V2(x) (((x) & 0x3f) << 16) + #define MTK_QDMA_GMAC2_QID 8 +@@ -300,6 +299,8 @@ + #define TX_DMA_CHKSUM_V2 (0x7 << 28) + #define TX_DMA_TSO_V2 BIT(31) + ++#define TX_DMA_SPTAG_V3 BIT(27) ++ + /* QDMA V2 descriptor txd4 */ + #define TX_DMA_FPORT_SHIFT_V2 8 + #define TX_DMA_FPORT_MASK_V2 0xf +@@ -639,6 +640,7 @@ enum mtk_tx_flags { + */ + MTK_TX_FLAGS_FPORT0 = 0x04, + MTK_TX_FLAGS_FPORT1 = 0x08, ++ MTK_TX_FLAGS_FPORT2 = 0x10, + }; + + /* This enum allows us to identify how the clock is defined on the array of the +@@ -724,6 +726,42 @@ enum mtk_dev_state { + MTK_RESETTING + }; + ++/* PSE Port Definition */ ++enum mtk_pse_port { ++ PSE_ADMA_PORT = 0, ++ PSE_GDM1_PORT, ++ PSE_GDM2_PORT, ++ PSE_PPE0_PORT, ++ PSE_PPE1_PORT, ++ PSE_QDMA_TX_PORT, ++ PSE_QDMA_RX_PORT, ++ PSE_DROP_PORT, ++ PSE_WDMA0_PORT, ++ PSE_WDMA1_PORT, ++ PSE_TDMA_PORT, ++ PSE_NONE_PORT, ++ PSE_PPE2_PORT, ++ PSE_WDMA2_PORT, ++ PSE_EIP197_PORT, ++ PSE_GDM3_PORT, ++ PSE_PORT_MAX ++}; ++ ++/* GMAC Identifier */ ++enum mtk_gmac_id { ++ MTK_GMAC1_ID = 0, ++ MTK_GMAC2_ID, ++ MTK_GMAC3_ID, ++ MTK_GMAC_ID_MAX ++}; ++ ++/* GDM Type */ ++enum mtk_gdm_type { ++ MTK_GDM_TYPE = 0, ++ MTK_XGDM_TYPE, ++ MTK_GDM_TYPE_MAX ++}; ++ + enum mtk_tx_buf_type { + MTK_TYPE_SKB, + MTK_TYPE_XDP_TX, +@@ -820,6 +858,7 @@ enum mkt_eth_capabilities { + MTK_QDMA_BIT, + MTK_NETSYS_V1_BIT, + MTK_NETSYS_V2_BIT, ++ MTK_NETSYS_V3_BIT, + MTK_SOC_MT7628_BIT, + MTK_RSTCTRL_PPE1_BIT, + MTK_U3_COPHY_V2_BIT, +@@ -856,6 +895,7 @@ enum mkt_eth_capabilities { + #define MTK_QDMA BIT(MTK_QDMA_BIT) + #define MTK_NETSYS_V1 BIT(MTK_NETSYS_V1_BIT) + #define MTK_NETSYS_V2 BIT(MTK_NETSYS_V2_BIT) ++#define MTK_NETSYS_V3 BIT(MTK_NETSYS_V3_BIT) + #define MTK_SOC_MT7628 BIT(MTK_SOC_MT7628_BIT) + #define MTK_RSTCTRL_PPE1 BIT(MTK_RSTCTRL_PPE1_BIT) + #define MTK_U3_COPHY_V2 BIT(MTK_U3_COPHY_V2_BIT) diff --git a/target/linux/generic/pending-6.1/737-05-net-ethernet-mtk_eth_soc-convert-caps-in-mtk_soc_dat.patch b/target/linux/generic/pending-6.1/737-05-net-ethernet-mtk_eth_soc-convert-caps-in-mtk_soc_dat.patch new file mode 100644 index 00000000000000..068201cf7dfb24 --- /dev/null +++ b/target/linux/generic/pending-6.1/737-05-net-ethernet-mtk_eth_soc-convert-caps-in-mtk_soc_dat.patch @@ -0,0 +1,197 @@ +From 45b575fd9e6a455090820248bf1b98b1f2c7b6c8 Mon Sep 17 00:00:00 2001 +From: Lorenzo Bianconi +Date: Tue, 7 Mar 2023 15:56:00 +0000 +Subject: [PATCH 5/7] net: ethernet: mtk_eth_soc: convert caps in mtk_soc_data + struct to u64 + +This is a preliminary patch to introduce support for MT7988 SoC. + +Signed-off-by: Lorenzo Bianconi +Signed-off-by: Daniel Golle +--- + drivers/net/ethernet/mediatek/mtk_eth_path.c | 22 +++---- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 62 ++++++++++---------- + 2 files changed, 42 insertions(+), 42 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_path.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_path.c +@@ -15,10 +15,10 @@ + struct mtk_eth_muxc { + const char *name; + int cap_bit; +- int (*set_path)(struct mtk_eth *eth, int path); ++ int (*set_path)(struct mtk_eth *eth, u64 path); + }; + +-static const char *mtk_eth_path_name(int path) ++static const char *mtk_eth_path_name(u64 path) + { + switch (path) { + case MTK_ETH_PATH_GMAC1_RGMII: +@@ -40,7 +40,7 @@ static const char *mtk_eth_path_name(int + } + } + +-static int set_mux_gdm1_to_gmac1_esw(struct mtk_eth *eth, int path) ++static int set_mux_gdm1_to_gmac1_esw(struct mtk_eth *eth, u64 path) + { + bool updated = true; + u32 val, mask, set; +@@ -71,7 +71,7 @@ static int set_mux_gdm1_to_gmac1_esw(str + return 0; + } + +-static int set_mux_gmac2_gmac0_to_gephy(struct mtk_eth *eth, int path) ++static int set_mux_gmac2_gmac0_to_gephy(struct mtk_eth *eth, u64 path) + { + unsigned int val = 0; + bool updated = true; +@@ -94,7 +94,7 @@ static int set_mux_gmac2_gmac0_to_gephy( + return 0; + } + +-static int set_mux_u3_gmac2_to_qphy(struct mtk_eth *eth, int path) ++static int set_mux_u3_gmac2_to_qphy(struct mtk_eth *eth, u64 path) + { + unsigned int val = 0, mask = 0, reg = 0; + bool updated = true; +@@ -125,7 +125,7 @@ static int set_mux_u3_gmac2_to_qphy(stru + return 0; + } + +-static int set_mux_gmac1_gmac2_to_sgmii_rgmii(struct mtk_eth *eth, int path) ++static int set_mux_gmac1_gmac2_to_sgmii_rgmii(struct mtk_eth *eth, u64 path) + { + unsigned int val = 0; + bool updated = true; +@@ -163,7 +163,7 @@ static int set_mux_gmac1_gmac2_to_sgmii_ + return 0; + } + +-static int set_mux_gmac12_to_gephy_sgmii(struct mtk_eth *eth, int path) ++static int set_mux_gmac12_to_gephy_sgmii(struct mtk_eth *eth, u64 path) + { + unsigned int val = 0; + bool updated = true; +@@ -218,7 +218,7 @@ static const struct mtk_eth_muxc mtk_eth + }, + }; + +-static int mtk_eth_mux_setup(struct mtk_eth *eth, int path) ++static int mtk_eth_mux_setup(struct mtk_eth *eth, u64 path) + { + int i, err = 0; + +@@ -249,7 +249,7 @@ out: + + int mtk_gmac_sgmii_path_setup(struct mtk_eth *eth, int mac_id) + { +- int path; ++ u64 path; + + path = (mac_id == 0) ? MTK_ETH_PATH_GMAC1_SGMII : + MTK_ETH_PATH_GMAC2_SGMII; +@@ -260,7 +260,7 @@ int mtk_gmac_sgmii_path_setup(struct mtk + + int mtk_gmac_gephy_path_setup(struct mtk_eth *eth, int mac_id) + { +- int path = 0; ++ u64 path = 0; + + if (mac_id == 1) + path = MTK_ETH_PATH_GMAC2_GEPHY; +@@ -274,7 +274,7 @@ int mtk_gmac_gephy_path_setup(struct mtk + + int mtk_gmac_rgmii_path_setup(struct mtk_eth *eth, int mac_id) + { +- int path; ++ u64 path; + + path = (mac_id == 0) ? MTK_ETH_PATH_GMAC1_RGMII : + MTK_ETH_PATH_GMAC2_RGMII; +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -881,44 +881,44 @@ enum mkt_eth_capabilities { + }; + + /* Supported hardware group on SoCs */ +-#define MTK_RGMII BIT(MTK_RGMII_BIT) +-#define MTK_TRGMII BIT(MTK_TRGMII_BIT) +-#define MTK_SGMII BIT(MTK_SGMII_BIT) +-#define MTK_ESW BIT(MTK_ESW_BIT) +-#define MTK_GEPHY BIT(MTK_GEPHY_BIT) +-#define MTK_MUX BIT(MTK_MUX_BIT) +-#define MTK_INFRA BIT(MTK_INFRA_BIT) +-#define MTK_SHARED_SGMII BIT(MTK_SHARED_SGMII_BIT) +-#define MTK_HWLRO BIT(MTK_HWLRO_BIT) +-#define MTK_SHARED_INT BIT(MTK_SHARED_INT_BIT) +-#define MTK_TRGMII_MT7621_CLK BIT(MTK_TRGMII_MT7621_CLK_BIT) +-#define MTK_QDMA BIT(MTK_QDMA_BIT) +-#define MTK_NETSYS_V1 BIT(MTK_NETSYS_V1_BIT) +-#define MTK_NETSYS_V2 BIT(MTK_NETSYS_V2_BIT) +-#define MTK_NETSYS_V3 BIT(MTK_NETSYS_V3_BIT) +-#define MTK_SOC_MT7628 BIT(MTK_SOC_MT7628_BIT) +-#define MTK_RSTCTRL_PPE1 BIT(MTK_RSTCTRL_PPE1_BIT) +-#define MTK_U3_COPHY_V2 BIT(MTK_U3_COPHY_V2_BIT) ++#define MTK_RGMII BIT_ULL(MTK_RGMII_BIT) ++#define MTK_TRGMII BIT_ULL(MTK_TRGMII_BIT) ++#define MTK_SGMII BIT_ULL(MTK_SGMII_BIT) ++#define MTK_ESW BIT_ULL(MTK_ESW_BIT) ++#define MTK_GEPHY BIT_ULL(MTK_GEPHY_BIT) ++#define MTK_MUX BIT_ULL(MTK_MUX_BIT) ++#define MTK_INFRA BIT_ULL(MTK_INFRA_BIT) ++#define MTK_SHARED_SGMII BIT_ULL(MTK_SHARED_SGMII_BIT) ++#define MTK_HWLRO BIT_ULL(MTK_HWLRO_BIT) ++#define MTK_SHARED_INT BIT_ULL(MTK_SHARED_INT_BIT) ++#define MTK_TRGMII_MT7621_CLK BIT_ULL(MTK_TRGMII_MT7621_CLK_BIT) ++#define MTK_QDMA BIT_ULL(MTK_QDMA_BIT) ++#define MTK_NETSYS_V1 BIT_ULL(MTK_NETSYS_V1_BIT) ++#define MTK_NETSYS_V2 BIT_ULL(MTK_NETSYS_V2_BIT) ++#define MTK_NETSYS_V3 BIT_ULL(MTK_NETSYS_V3_BIT) ++#define MTK_SOC_MT7628 BIT_ULL(MTK_SOC_MT7628_BIT) ++#define MTK_RSTCTRL_PPE1 BIT_ULL(MTK_RSTCTRL_PPE1_BIT) ++#define MTK_U3_COPHY_V2 BIT_ULL(MTK_U3_COPHY_V2_BIT) + + #define MTK_ETH_MUX_GDM1_TO_GMAC1_ESW \ +- BIT(MTK_ETH_MUX_GDM1_TO_GMAC1_ESW_BIT) ++ BIT_ULL(MTK_ETH_MUX_GDM1_TO_GMAC1_ESW_BIT) + #define MTK_ETH_MUX_GMAC2_GMAC0_TO_GEPHY \ +- BIT(MTK_ETH_MUX_GMAC2_GMAC0_TO_GEPHY_BIT) ++ BIT_ULL(MTK_ETH_MUX_GMAC2_GMAC0_TO_GEPHY_BIT) + #define MTK_ETH_MUX_U3_GMAC2_TO_QPHY \ +- BIT(MTK_ETH_MUX_U3_GMAC2_TO_QPHY_BIT) ++ BIT_ULL(MTK_ETH_MUX_U3_GMAC2_TO_QPHY_BIT) + #define MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII \ +- BIT(MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII_BIT) ++ BIT_ULL(MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII_BIT) + #define MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII \ +- BIT(MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII_BIT) ++ BIT_ULL(MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII_BIT) + + /* Supported path present on SoCs */ +-#define MTK_ETH_PATH_GMAC1_RGMII BIT(MTK_ETH_PATH_GMAC1_RGMII_BIT) +-#define MTK_ETH_PATH_GMAC1_TRGMII BIT(MTK_ETH_PATH_GMAC1_TRGMII_BIT) +-#define MTK_ETH_PATH_GMAC1_SGMII BIT(MTK_ETH_PATH_GMAC1_SGMII_BIT) +-#define MTK_ETH_PATH_GMAC2_RGMII BIT(MTK_ETH_PATH_GMAC2_RGMII_BIT) +-#define MTK_ETH_PATH_GMAC2_SGMII BIT(MTK_ETH_PATH_GMAC2_SGMII_BIT) +-#define MTK_ETH_PATH_GMAC2_GEPHY BIT(MTK_ETH_PATH_GMAC2_GEPHY_BIT) +-#define MTK_ETH_PATH_GDM1_ESW BIT(MTK_ETH_PATH_GDM1_ESW_BIT) ++#define MTK_ETH_PATH_GMAC1_RGMII BIT_ULL(MTK_ETH_PATH_GMAC1_RGMII_BIT) ++#define MTK_ETH_PATH_GMAC1_TRGMII BIT_ULL(MTK_ETH_PATH_GMAC1_TRGMII_BIT) ++#define MTK_ETH_PATH_GMAC1_SGMII BIT_ULL(MTK_ETH_PATH_GMAC1_SGMII_BIT) ++#define MTK_ETH_PATH_GMAC2_RGMII BIT_ULL(MTK_ETH_PATH_GMAC2_RGMII_BIT) ++#define MTK_ETH_PATH_GMAC2_SGMII BIT_ULL(MTK_ETH_PATH_GMAC2_SGMII_BIT) ++#define MTK_ETH_PATH_GMAC2_GEPHY BIT_ULL(MTK_ETH_PATH_GMAC2_GEPHY_BIT) ++#define MTK_ETH_PATH_GDM1_ESW BIT_ULL(MTK_ETH_PATH_GDM1_ESW_BIT) + + #define MTK_GMAC1_RGMII (MTK_ETH_PATH_GMAC1_RGMII | MTK_RGMII) + #define MTK_GMAC1_TRGMII (MTK_ETH_PATH_GMAC1_TRGMII | MTK_TRGMII) +@@ -1074,7 +1074,7 @@ struct mtk_reg_map { + struct mtk_soc_data { + const struct mtk_reg_map *reg_map; + u32 ana_rgc3; +- u32 caps; ++ u64 caps; + u32 required_clks; + bool required_pctl; + u8 offload_version; diff --git a/target/linux/generic/pending-6.1/737-06-net-ethernet-mtk_eth_soc-add-support-for-MT7988-SoC.patch b/target/linux/generic/pending-6.1/737-06-net-ethernet-mtk_eth_soc-add-support-for-MT7988-SoC.patch new file mode 100644 index 00000000000000..4e52e0da547a46 --- /dev/null +++ b/target/linux/generic/pending-6.1/737-06-net-ethernet-mtk_eth_soc-add-support-for-MT7988-SoC.patch @@ -0,0 +1,495 @@ +From 661bacf4363ca68939c15e20056b5f72fbd034e7 Mon Sep 17 00:00:00 2001 +From: Lorenzo Bianconi +Date: Sat, 25 Feb 2023 00:08:24 +0100 +Subject: [PATCH 6/7] net: ethernet: mtk_eth_soc: add support for MT7988 SoC + +Introduce support for ethernet chip available in MT7988 SoC to +mtk_eth_soc driver. +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 153 ++++++++++++++-- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 193 ++++++++++++++------ + 2 files changed, 279 insertions(+), 67 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -152,6 +152,54 @@ static const struct mtk_reg_map mt7986_r + .pse_oq_sta = 0x01a0, + }; + ++static const struct mtk_reg_map mt7988_reg_map = { ++ .tx_irq_mask = 0x461c, ++ .tx_irq_status = 0x4618, ++ .pdma = { ++ .rx_ptr = 0x6900, ++ .rx_cnt_cfg = 0x6904, ++ .pcrx_ptr = 0x6908, ++ .glo_cfg = 0x6a04, ++ .rst_idx = 0x6a08, ++ .delay_irq = 0x6a0c, ++ .irq_status = 0x6a20, ++ .irq_mask = 0x6a28, ++ .adma_rx_dbg0 = 0x6a38, ++ .int_grp = 0x6a50, ++ }, ++ .qdma = { ++ .qtx_cfg = 0x4400, ++ .qtx_sch = 0x4404, ++ .rx_ptr = 0x4500, ++ .rx_cnt_cfg = 0x4504, ++ .qcrx_ptr = 0x4508, ++ .glo_cfg = 0x4604, ++ .rst_idx = 0x4608, ++ .delay_irq = 0x460c, ++ .fc_th = 0x4610, ++ .int_grp = 0x4620, ++ .hred = 0x4644, ++ .ctx_ptr = 0x4700, ++ .dtx_ptr = 0x4704, ++ .crx_ptr = 0x4710, ++ .drx_ptr = 0x4714, ++ .fq_head = 0x4720, ++ .fq_tail = 0x4724, ++ .fq_count = 0x4728, ++ .fq_blen = 0x472c, ++ .tx_sch_rate = 0x4798, ++ }, ++ .gdm1_cnt = 0x1c00, ++ .gdma_to_ppe = 0x3333, ++ .ppe_base = 0x2200, ++ .wdma_base = { ++ [0] = 0x4800, ++ [1] = 0x4c00, ++ }, ++ .pse_iq_sta = 0x0180, ++ .pse_oq_sta = 0x01a0, ++}; ++ + /* strings used by ethtool */ + static const struct mtk_ethtool_stats { + char str[ETH_GSTRING_LEN]; +@@ -179,10 +227,54 @@ static const struct mtk_ethtool_stats { + }; + + static const char * const mtk_clks_source_name[] = { +- "ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2", "fe", "trgpll", +- "sgmii_tx250m", "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", +- "sgmii2_tx250m", "sgmii2_rx250m", "sgmii2_cdr_ref", "sgmii2_cdr_fb", +- "sgmii_ck", "eth2pll", "wocpu0", "wocpu1", "netsys0", "netsys1" ++ "ethif", ++ "sgmiitop", ++ "esw", ++ "gp0", ++ "gp1", ++ "gp2", ++ "gp3", ++ "xgp1", ++ "xgp2", ++ "xgp3", ++ "crypto", ++ "fe", ++ "trgpll", ++ "sgmii_tx250m", ++ "sgmii_rx250m", ++ "sgmii_cdr_ref", ++ "sgmii_cdr_fb", ++ "sgmii2_tx250m", ++ "sgmii2_rx250m", ++ "sgmii2_cdr_ref", ++ "sgmii2_cdr_fb", ++ "sgmii_ck", ++ "eth2pll", ++ "wocpu0", ++ "wocpu1", ++ "netsys0", ++ "netsys1", ++ "ethwarp_wocpu2", ++ "ethwarp_wocpu1", ++ "ethwarp_wocpu0", ++ "top_usxgmii0_sel", ++ "top_usxgmii1_sel", ++ "top_sgm0_sel", ++ "top_sgm1_sel", ++ "top_xfi_phy0_xtal_sel", ++ "top_xfi_phy1_xtal_sel", ++ "top_eth_gmii_sel", ++ "top_eth_refck_50m_sel", ++ "top_eth_sys_200m_sel", ++ "top_eth_sys_sel", ++ "top_eth_xgmii_sel", ++ "top_eth_mii_sel", ++ "top_netsys_sel", ++ "top_netsys_500m_sel", ++ "top_netsys_pao_2x_sel", ++ "top_netsys_sync_250m_sel", ++ "top_netsys_ppefb_250m_sel", ++ "top_netsys_warp_sel", + }; + + void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg) +@@ -1253,10 +1345,19 @@ static void mtk_tx_set_dma_desc_v2(struc + data |= TX_DMA_LS0; + WRITE_ONCE(desc->txd3, data); + +- if (mac->id == MTK_GMAC3_ID) +- data = PSE_GDM3_PORT; +- else +- data = (mac->id + 1) << TX_DMA_FPORT_SHIFT_V2; /* forward port */ ++ /* set forward port */ ++ switch (mac->id) { ++ case MTK_GMAC1_ID: ++ data = PSE_GDM1_PORT << TX_DMA_FPORT_SHIFT_V2; ++ break; ++ case MTK_GMAC2_ID: ++ data = PSE_GDM2_PORT << TX_DMA_FPORT_SHIFT_V2; ++ break; ++ case MTK_GMAC3_ID: ++ data = PSE_GDM3_PORT << TX_DMA_FPORT_SHIFT_V2; ++ break; ++ } ++ + data |= TX_DMA_SWC_V2 | QID_BITS_V2(info->qid); + WRITE_ONCE(desc->txd4, data); + +@@ -5016,6 +5117,25 @@ static const struct mtk_soc_data mt7986_ + }, + }; + ++static const struct mtk_soc_data mt7988_data = { ++ .reg_map = &mt7988_reg_map, ++ .ana_rgc3 = 0x128, ++ .caps = MT7988_CAPS, ++ .hw_features = MTK_HW_FEATURES, ++ .required_clks = MT7988_CLKS_BITMAP, ++ .required_pctl = false, ++ .num_devs = 3, ++ .txrx = { ++ .txd_size = sizeof(struct mtk_tx_dma_v2), ++ .rxd_size = sizeof(struct mtk_rx_dma_v2), ++ .rx_irq_done_mask = MTK_RX_DONE_INT_V2, ++ .rx_dma_l4_valid = RX_DMA_L4_VALID_V2, ++ .dma_max_len = MTK_TX_DMA_BUF_LEN_V2, ++ .dma_len_offset = 8, ++ }, ++}; ++ ++ + static const struct mtk_soc_data rt5350_data = { + .reg_map = &mt7628_reg_map, + .caps = MT7628_CAPS, +@@ -5034,14 +5154,15 @@ static const struct mtk_soc_data rt5350_ + }; + + const struct of_device_id of_mtk_match[] = { +- { .compatible = "mediatek,mt2701-eth", .data = &mt2701_data}, +- { .compatible = "mediatek,mt7621-eth", .data = &mt7621_data}, +- { .compatible = "mediatek,mt7622-eth", .data = &mt7622_data}, +- { .compatible = "mediatek,mt7623-eth", .data = &mt7623_data}, +- { .compatible = "mediatek,mt7629-eth", .data = &mt7629_data}, +- { .compatible = "mediatek,mt7981-eth", .data = &mt7981_data}, +- { .compatible = "mediatek,mt7986-eth", .data = &mt7986_data}, +- { .compatible = "ralink,rt5350-eth", .data = &rt5350_data}, ++ { .compatible = "mediatek,mt2701-eth", .data = &mt2701_data }, ++ { .compatible = "mediatek,mt7621-eth", .data = &mt7621_data }, ++ { .compatible = "mediatek,mt7622-eth", .data = &mt7622_data }, ++ { .compatible = "mediatek,mt7623-eth", .data = &mt7623_data }, ++ { .compatible = "mediatek,mt7629-eth", .data = &mt7629_data }, ++ { .compatible = "mediatek,mt7981-eth", .data = &mt7981_data }, ++ { .compatible = "mediatek,mt7986-eth", .data = &mt7986_data }, ++ { .compatible = "mediatek,mt7988-eth", .data = &mt7988_data }, ++ { .compatible = "ralink,rt5350-eth", .data = &rt5350_data }, + {}, + }; + MODULE_DEVICE_TABLE(of, of_mtk_match); +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -116,7 +116,8 @@ + #define MTK_CDMP_EG_CTRL 0x404 + + /* GDM Exgress Control Register */ +-#define MTK_GDMA_FWD_CFG(x) (0x500 + (x * 0x1000)) ++#define MTK_GDMA_FWD_CFG(x) ((x == MTK_GMAC3_ID) ? \ ++ 0x540 : 0x500 + (x * 0x1000)) + #define MTK_GDMA_SPECIAL_TAG BIT(24) + #define MTK_GDMA_ICS_EN BIT(22) + #define MTK_GDMA_TCS_EN BIT(21) +@@ -653,6 +654,11 @@ enum mtk_clks_map { + MTK_CLK_GP0, + MTK_CLK_GP1, + MTK_CLK_GP2, ++ MTK_CLK_GP3, ++ MTK_CLK_XGP1, ++ MTK_CLK_XGP2, ++ MTK_CLK_XGP3, ++ MTK_CLK_CRYPTO, + MTK_CLK_FE, + MTK_CLK_TRGPLL, + MTK_CLK_SGMII_TX_250M, +@@ -669,57 +675,108 @@ enum mtk_clks_map { + MTK_CLK_WOCPU1, + MTK_CLK_NETSYS0, + MTK_CLK_NETSYS1, ++ MTK_CLK_ETHWARP_WOCPU2, ++ MTK_CLK_ETHWARP_WOCPU1, ++ MTK_CLK_ETHWARP_WOCPU0, ++ MTK_CLK_TOP_USXGMII_SBUS_0_SEL, ++ MTK_CLK_TOP_USXGMII_SBUS_1_SEL, ++ MTK_CLK_TOP_SGM_0_SEL, ++ MTK_CLK_TOP_SGM_1_SEL, ++ MTK_CLK_TOP_XFI_PHY_0_XTAL_SEL, ++ MTK_CLK_TOP_XFI_PHY_1_XTAL_SEL, ++ MTK_CLK_TOP_ETH_GMII_SEL, ++ MTK_CLK_TOP_ETH_REFCK_50M_SEL, ++ MTK_CLK_TOP_ETH_SYS_200M_SEL, ++ MTK_CLK_TOP_ETH_SYS_SEL, ++ MTK_CLK_TOP_ETH_XGMII_SEL, ++ MTK_CLK_TOP_ETH_MII_SEL, ++ MTK_CLK_TOP_NETSYS_SEL, ++ MTK_CLK_TOP_NETSYS_500M_SEL, ++ MTK_CLK_TOP_NETSYS_PAO_2X_SEL, ++ MTK_CLK_TOP_NETSYS_SYNC_250M_SEL, ++ MTK_CLK_TOP_NETSYS_PPEFB_250M_SEL, ++ MTK_CLK_TOP_NETSYS_WARP_SEL, + MTK_CLK_MAX + }; + +-#define MT7623_CLKS_BITMAP (BIT(MTK_CLK_ETHIF) | BIT(MTK_CLK_ESW) | \ +- BIT(MTK_CLK_GP1) | BIT(MTK_CLK_GP2) | \ +- BIT(MTK_CLK_TRGPLL)) +-#define MT7622_CLKS_BITMAP (BIT(MTK_CLK_ETHIF) | BIT(MTK_CLK_ESW) | \ +- BIT(MTK_CLK_GP0) | BIT(MTK_CLK_GP1) | \ +- BIT(MTK_CLK_GP2) | \ +- BIT(MTK_CLK_SGMII_TX_250M) | \ +- BIT(MTK_CLK_SGMII_RX_250M) | \ +- BIT(MTK_CLK_SGMII_CDR_REF) | \ +- BIT(MTK_CLK_SGMII_CDR_FB) | \ +- BIT(MTK_CLK_SGMII_CK) | \ +- BIT(MTK_CLK_ETH2PLL)) ++#define MT7623_CLKS_BITMAP (BIT_ULL(MTK_CLK_ETHIF) | BIT_ULL(MTK_CLK_ESW) | \ ++ BIT_ULL(MTK_CLK_GP1) | BIT_ULL(MTK_CLK_GP2) | \ ++ BIT_ULL(MTK_CLK_TRGPLL)) ++#define MT7622_CLKS_BITMAP (BIT_ULL(MTK_CLK_ETHIF) | BIT_ULL(MTK_CLK_ESW) | \ ++ BIT_ULL(MTK_CLK_GP0) | BIT_ULL(MTK_CLK_GP1) | \ ++ BIT_ULL(MTK_CLK_GP2) | \ ++ BIT_ULL(MTK_CLK_SGMII_TX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII_RX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII_CDR_REF) | \ ++ BIT_ULL(MTK_CLK_SGMII_CDR_FB) | \ ++ BIT_ULL(MTK_CLK_SGMII_CK) | \ ++ BIT_ULL(MTK_CLK_ETH2PLL)) + #define MT7621_CLKS_BITMAP (0) + #define MT7628_CLKS_BITMAP (0) +-#define MT7629_CLKS_BITMAP (BIT(MTK_CLK_ETHIF) | BIT(MTK_CLK_ESW) | \ +- BIT(MTK_CLK_GP0) | BIT(MTK_CLK_GP1) | \ +- BIT(MTK_CLK_GP2) | BIT(MTK_CLK_FE) | \ +- BIT(MTK_CLK_SGMII_TX_250M) | \ +- BIT(MTK_CLK_SGMII_RX_250M) | \ +- BIT(MTK_CLK_SGMII_CDR_REF) | \ +- BIT(MTK_CLK_SGMII_CDR_FB) | \ +- BIT(MTK_CLK_SGMII2_TX_250M) | \ +- BIT(MTK_CLK_SGMII2_RX_250M) | \ +- BIT(MTK_CLK_SGMII2_CDR_REF) | \ +- BIT(MTK_CLK_SGMII2_CDR_FB) | \ +- BIT(MTK_CLK_SGMII_CK) | \ +- BIT(MTK_CLK_ETH2PLL) | BIT(MTK_CLK_SGMIITOP)) +-#define MT7981_CLKS_BITMAP (BIT(MTK_CLK_FE) | BIT(MTK_CLK_GP2) | BIT(MTK_CLK_GP1) | \ +- BIT(MTK_CLK_WOCPU0) | \ +- BIT(MTK_CLK_SGMII_TX_250M) | \ +- BIT(MTK_CLK_SGMII_RX_250M) | \ +- BIT(MTK_CLK_SGMII_CDR_REF) | \ +- BIT(MTK_CLK_SGMII_CDR_FB) | \ +- BIT(MTK_CLK_SGMII2_TX_250M) | \ +- BIT(MTK_CLK_SGMII2_RX_250M) | \ +- BIT(MTK_CLK_SGMII2_CDR_REF) | \ +- BIT(MTK_CLK_SGMII2_CDR_FB) | \ +- BIT(MTK_CLK_SGMII_CK)) +-#define MT7986_CLKS_BITMAP (BIT(MTK_CLK_FE) | BIT(MTK_CLK_GP2) | BIT(MTK_CLK_GP1) | \ +- BIT(MTK_CLK_WOCPU1) | BIT(MTK_CLK_WOCPU0) | \ +- BIT(MTK_CLK_SGMII_TX_250M) | \ +- BIT(MTK_CLK_SGMII_RX_250M) | \ +- BIT(MTK_CLK_SGMII_CDR_REF) | \ +- BIT(MTK_CLK_SGMII_CDR_FB) | \ +- BIT(MTK_CLK_SGMII2_TX_250M) | \ +- BIT(MTK_CLK_SGMII2_RX_250M) | \ +- BIT(MTK_CLK_SGMII2_CDR_REF) | \ +- BIT(MTK_CLK_SGMII2_CDR_FB)) ++#define MT7629_CLKS_BITMAP (BIT_ULL(MTK_CLK_ETHIF) | BIT_ULL(MTK_CLK_ESW) | \ ++ BIT_ULL(MTK_CLK_GP0) | BIT_ULL(MTK_CLK_GP1) | \ ++ BIT_ULL(MTK_CLK_GP2) | BIT_ULL(MTK_CLK_FE) | \ ++ BIT_ULL(MTK_CLK_SGMII_TX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII_RX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII_CDR_REF) | \ ++ BIT_ULL(MTK_CLK_SGMII_CDR_FB) | \ ++ BIT_ULL(MTK_CLK_SGMII2_TX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII2_RX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII2_CDR_REF) | \ ++ BIT_ULL(MTK_CLK_SGMII2_CDR_FB) | \ ++ BIT_ULL(MTK_CLK_SGMII_CK) | \ ++ BIT_ULL(MTK_CLK_ETH2PLL) | BIT_ULL(MTK_CLK_SGMIITOP)) ++#define MT7981_CLKS_BITMAP (BIT_ULL(MTK_CLK_FE) | BIT_ULL(MTK_CLK_GP2) | BIT_ULL(MTK_CLK_GP1) | \ ++ BIT_ULL(MTK_CLK_WOCPU0) | \ ++ BIT_ULL(MTK_CLK_SGMII_TX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII_RX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII_CDR_REF) | \ ++ BIT_ULL(MTK_CLK_SGMII_CDR_FB) | \ ++ BIT_ULL(MTK_CLK_SGMII2_TX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII2_RX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII2_CDR_REF) | \ ++ BIT_ULL(MTK_CLK_SGMII2_CDR_FB) | \ ++ BIT_ULL(MTK_CLK_SGMII_CK)) ++#define MT7986_CLKS_BITMAP (BIT_ULL(MTK_CLK_FE) | BIT_ULL(MTK_CLK_GP2) | BIT_ULL(MTK_CLK_GP1) | \ ++ BIT_ULL(MTK_CLK_WOCPU1) | BIT_ULL(MTK_CLK_WOCPU0) | \ ++ BIT_ULL(MTK_CLK_SGMII_TX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII_RX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII_CDR_REF) | \ ++ BIT_ULL(MTK_CLK_SGMII_CDR_FB) | \ ++ BIT_ULL(MTK_CLK_SGMII2_TX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII2_RX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII2_CDR_REF) | \ ++ BIT_ULL(MTK_CLK_SGMII2_CDR_FB)) ++#define MT7988_CLKS_BITMAP (BIT_ULL(MTK_CLK_FE) | BIT_ULL(MTK_CLK_ESW) | \ ++ BIT_ULL(MTK_CLK_GP1) | BIT_ULL(MTK_CLK_GP2) | \ ++ BIT_ULL(MTK_CLK_GP3) | BIT_ULL(MTK_CLK_XGP1) | \ ++ BIT_ULL(MTK_CLK_XGP2) | BIT_ULL(MTK_CLK_XGP3) | \ ++ BIT_ULL(MTK_CLK_CRYPTO) | \ ++ BIT_ULL(MTK_CLK_SGMII_TX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII_RX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII2_TX_250M) | \ ++ BIT_ULL(MTK_CLK_SGMII2_RX_250M) | \ ++ BIT_ULL(MTK_CLK_ETHWARP_WOCPU2) | \ ++ BIT_ULL(MTK_CLK_ETHWARP_WOCPU1) | \ ++ BIT_ULL(MTK_CLK_ETHWARP_WOCPU0) | \ ++ BIT_ULL(MTK_CLK_TOP_USXGMII_SBUS_0_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_USXGMII_SBUS_1_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_SGM_0_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_SGM_1_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_XFI_PHY_0_XTAL_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_XFI_PHY_1_XTAL_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_ETH_GMII_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_ETH_REFCK_50M_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_ETH_SYS_200M_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_ETH_SYS_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_ETH_XGMII_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_ETH_MII_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_NETSYS_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_NETSYS_500M_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_NETSYS_PAO_2X_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_NETSYS_SYNC_250M_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_NETSYS_PPEFB_250M_SEL) | \ ++ BIT_ULL(MTK_CLK_TOP_NETSYS_WARP_SEL)) + + enum mtk_dev_state { + MTK_HW_INIT, +@@ -847,6 +904,7 @@ enum mkt_eth_capabilities { + MTK_RGMII_BIT = 0, + MTK_TRGMII_BIT, + MTK_SGMII_BIT, ++ MTK_USXGMII_BIT, + MTK_ESW_BIT, + MTK_GEPHY_BIT, + MTK_MUX_BIT, +@@ -869,6 +927,8 @@ enum mkt_eth_capabilities { + MTK_ETH_MUX_U3_GMAC2_TO_QPHY_BIT, + MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII_BIT, + MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII_BIT, ++ MTK_ETH_MUX_GMAC123_TO_GEPHY_SGMII_BIT, ++ MTK_ETH_MUX_GMAC123_TO_USXGMII_BIT, + + /* PATH BITS */ + MTK_ETH_PATH_GMAC1_RGMII_BIT, +@@ -877,13 +937,18 @@ enum mkt_eth_capabilities { + MTK_ETH_PATH_GMAC2_RGMII_BIT, + MTK_ETH_PATH_GMAC2_SGMII_BIT, + MTK_ETH_PATH_GMAC2_GEPHY_BIT, ++ MTK_ETH_PATH_GMAC3_SGMII_BIT, + MTK_ETH_PATH_GDM1_ESW_BIT, ++ MTK_ETH_PATH_GMAC1_USXGMII_BIT, ++ MTK_ETH_PATH_GMAC2_USXGMII_BIT, ++ MTK_ETH_PATH_GMAC3_USXGMII_BIT, + }; + + /* Supported hardware group on SoCs */ + #define MTK_RGMII BIT_ULL(MTK_RGMII_BIT) + #define MTK_TRGMII BIT_ULL(MTK_TRGMII_BIT) + #define MTK_SGMII BIT_ULL(MTK_SGMII_BIT) ++#define MTK_USXGMII BIT_ULL(MTK_USXGMII_BIT) + #define MTK_ESW BIT_ULL(MTK_ESW_BIT) + #define MTK_GEPHY BIT_ULL(MTK_GEPHY_BIT) + #define MTK_MUX BIT_ULL(MTK_MUX_BIT) +@@ -910,6 +975,10 @@ enum mkt_eth_capabilities { + BIT_ULL(MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII_BIT) + #define MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII \ + BIT_ULL(MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII_BIT) ++#define MTK_ETH_MUX_GMAC123_TO_GEPHY_SGMII \ ++ BIT_ULL(MTK_ETH_MUX_GMAC123_TO_GEPHY_SGMII_BIT) ++#define MTK_ETH_MUX_GMAC123_TO_USXGMII \ ++ BIT_ULL(MTK_ETH_MUX_GMAC123_TO_USXGMII_BIT) + + /* Supported path present on SoCs */ + #define MTK_ETH_PATH_GMAC1_RGMII BIT_ULL(MTK_ETH_PATH_GMAC1_RGMII_BIT) +@@ -918,7 +987,11 @@ enum mkt_eth_capabilities { + #define MTK_ETH_PATH_GMAC2_RGMII BIT_ULL(MTK_ETH_PATH_GMAC2_RGMII_BIT) + #define MTK_ETH_PATH_GMAC2_SGMII BIT_ULL(MTK_ETH_PATH_GMAC2_SGMII_BIT) + #define MTK_ETH_PATH_GMAC2_GEPHY BIT_ULL(MTK_ETH_PATH_GMAC2_GEPHY_BIT) ++#define MTK_ETH_PATH_GMAC3_SGMII BIT_ULL(MTK_ETH_PATH_GMAC3_SGMII_BIT) + #define MTK_ETH_PATH_GDM1_ESW BIT_ULL(MTK_ETH_PATH_GDM1_ESW_BIT) ++#define MTK_ETH_PATH_GMAC1_USXGMII BIT_ULL(MTK_ETH_PATH_GMAC1_USXGMII_BIT) ++#define MTK_ETH_PATH_GMAC2_USXGMII BIT_ULL(MTK_ETH_PATH_GMAC2_USXGMII_BIT) ++#define MTK_ETH_PATH_GMAC3_USXGMII BIT_ULL(MTK_ETH_PATH_GMAC3_USXGMII_BIT) + + #define MTK_GMAC1_RGMII (MTK_ETH_PATH_GMAC1_RGMII | MTK_RGMII) + #define MTK_GMAC1_TRGMII (MTK_ETH_PATH_GMAC1_TRGMII | MTK_TRGMII) +@@ -926,7 +999,11 @@ enum mkt_eth_capabilities { + #define MTK_GMAC2_RGMII (MTK_ETH_PATH_GMAC2_RGMII | MTK_RGMII) + #define MTK_GMAC2_SGMII (MTK_ETH_PATH_GMAC2_SGMII | MTK_SGMII) + #define MTK_GMAC2_GEPHY (MTK_ETH_PATH_GMAC2_GEPHY | MTK_GEPHY) ++#define MTK_GMAC3_SGMII (MTK_ETH_PATH_GMAC3_SGMII | MTK_SGMII) + #define MTK_GDM1_ESW (MTK_ETH_PATH_GDM1_ESW | MTK_ESW) ++#define MTK_GMAC1_USXGMII (MTK_ETH_PATH_GMAC1_USXGMII | MTK_USXGMII) ++#define MTK_GMAC2_USXGMII (MTK_ETH_PATH_GMAC2_USXGMII | MTK_USXGMII) ++#define MTK_GMAC3_USXGMII (MTK_ETH_PATH_GMAC3_USXGMII | MTK_USXGMII) + + /* MUXes present on SoCs */ + /* 0: GDM1 -> GMAC1, 1: GDM1 -> ESW */ +@@ -949,6 +1026,12 @@ enum mkt_eth_capabilities { + #define MTK_MUX_GMAC12_TO_GEPHY_SGMII \ + (MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII | MTK_MUX) + ++#define MTK_MUX_GMAC123_TO_GEPHY_SGMII \ ++ (MTK_ETH_MUX_GMAC123_TO_GEPHY_SGMII | MTK_MUX) ++ ++#define MTK_MUX_GMAC123_TO_USXGMII \ ++ (MTK_ETH_MUX_GMAC123_TO_USXGMII | MTK_MUX | MTK_INFRA) ++ + #ifdef CONFIG_SOC_MT7621 + #define MTK_CAP_MASK MTK_NETSYS_V2 + #else +@@ -987,9 +1070,17 @@ enum mkt_eth_capabilities { + MTK_MUX_U3_GMAC2_TO_QPHY | MTK_U3_COPHY_V2 | \ + MTK_NETSYS_V2 | MTK_RSTCTRL_PPE1) + +-#define MT7986_CAPS (MTK_GMAC1_SGMII | MTK_GMAC2_SGMII | \ +- MTK_MUX_GMAC12_TO_GEPHY_SGMII | MTK_QDMA | \ +- MTK_NETSYS_V2 | MTK_RSTCTRL_PPE1) ++#define MT7986_CAPS (MTK_GMAC1_SGMII | MTK_GMAC2_SGMII | \ ++ MTK_MUX_GMAC12_TO_GEPHY_SGMII | \ ++ MTK_QDMA | MTK_NETSYS_V2 | \ ++ MTK_RSTCTRL_PPE1) ++ ++#define MT7988_CAPS (MTK_GMAC1_SGMII | MTK_GMAC2_SGMII | \ ++ MTK_GMAC3_SGMII | MTK_QDMA | \ ++ MTK_MUX_GMAC123_TO_GEPHY_SGMII | \ ++ MTK_NETSYS_V3 | MTK_RSTCTRL_PPE1 | \ ++ MTK_GMAC1_USXGMII | MTK_GMAC2_USXGMII | \ ++ MTK_GMAC3_USXGMII | MTK_MUX_GMAC123_TO_USXGMII) + + struct mtk_tx_dma_desc_info { + dma_addr_t addr; +@@ -1075,7 +1166,7 @@ struct mtk_soc_data { + const struct mtk_reg_map *reg_map; + u32 ana_rgc3; + u64 caps; +- u32 required_clks; ++ u64 required_clks; + bool required_pctl; + u8 offload_version; + u8 hash_offset; diff --git a/target/linux/generic/pending-6.1/737-07-net-ethernet-mtk_eth_soc-add-paths-and-SerDes-modes-.patch b/target/linux/generic/pending-6.1/737-07-net-ethernet-mtk_eth_soc-add-paths-and-SerDes-modes-.patch new file mode 100644 index 00000000000000..abde00cf617c00 --- /dev/null +++ b/target/linux/generic/pending-6.1/737-07-net-ethernet-mtk_eth_soc-add-paths-and-SerDes-modes-.patch @@ -0,0 +1,1867 @@ +From 3d833ad2cfc1ab503d9aae2967b7f10811bb3c9c Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Wed, 1 Mar 2023 11:56:04 +0000 +Subject: [PATCH 7/7] net: ethernet: mtk_eth_soc: add paths and SerDes modes + for MT7988 + +MT7988 comes with a built-in 2.5G PHY as well as +USXGMII/10GBase-KR/5GBase-KR compatible SerDes lanes for external PHYs. +Add support for configuring the MAC and SerDes parts for the new paths. + +Signed-off-by: Daniel Golle +--- + drivers/net/ethernet/mediatek/Kconfig | 7 + + drivers/net/ethernet/mediatek/Makefile | 1 + + drivers/net/ethernet/mediatek/mtk_eth_path.c | 154 +++- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 270 +++++- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 194 ++++- + drivers/net/ethernet/mediatek/mtk_usxgmii.c | 835 +++++++++++++++++++ + 6 files changed, 1428 insertions(+), 33 deletions(-) + create mode 100644 drivers/net/ethernet/mediatek/mtk_usxgmii.c + +--- a/drivers/net/ethernet/mediatek/Kconfig ++++ b/drivers/net/ethernet/mediatek/Kconfig +@@ -25,6 +25,13 @@ config NET_MEDIATEK_SOC + This driver supports the gigabit ethernet MACs in the + MediaTek SoC family. + ++config NET_MEDIATEK_SOC_USXGMII ++ bool "Support USXGMII SerDes on MT7988" ++ depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST ++ def_bool NET_MEDIATEK_SOC != n ++ help ++ Include support for 10G SerDes which can be found on MT7988. ++ + config NET_MEDIATEK_STAR_EMAC + tristate "MediaTek STAR Ethernet MAC support" + select PHYLIB +--- a/drivers/net/ethernet/mediatek/Makefile ++++ b/drivers/net/ethernet/mediatek/Makefile +@@ -5,6 +5,7 @@ + + obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth.o + mtk_eth-y := mtk_eth_soc.o mtk_eth_path.o mtk_ppe.o mtk_ppe_debugfs.o mtk_ppe_offload.o ++mtk_eth-$(CONFIG_NET_MEDIATEK_SOC_USXGMII) += mtk_usxgmii.o + mtk_eth-$(CONFIG_NET_MEDIATEK_SOC_WED) += mtk_wed.o mtk_wed_mcu.o mtk_wed_wo.o + ifdef CONFIG_DEBUG_FS + mtk_eth-$(CONFIG_NET_MEDIATEK_SOC_WED) += mtk_wed_debugfs.o +--- a/drivers/net/ethernet/mediatek/mtk_eth_path.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_path.c +@@ -31,10 +31,20 @@ static const char *mtk_eth_path_name(u64 + return "gmac2_rgmii"; + case MTK_ETH_PATH_GMAC2_SGMII: + return "gmac2_sgmii"; ++ case MTK_ETH_PATH_GMAC2_2P5GPHY: ++ return "gmac2_2p5gphy"; + case MTK_ETH_PATH_GMAC2_GEPHY: + return "gmac2_gephy"; ++ case MTK_ETH_PATH_GMAC3_SGMII: ++ return "gmac3_sgmii"; + case MTK_ETH_PATH_GDM1_ESW: + return "gdm1_esw"; ++ case MTK_ETH_PATH_GMAC1_USXGMII: ++ return "gmac1_usxgmii"; ++ case MTK_ETH_PATH_GMAC2_USXGMII: ++ return "gmac2_usxgmii"; ++ case MTK_ETH_PATH_GMAC3_USXGMII: ++ return "gmac3_usxgmii"; + default: + return "unknown path"; + } +@@ -42,8 +52,8 @@ static const char *mtk_eth_path_name(u64 + + static int set_mux_gdm1_to_gmac1_esw(struct mtk_eth *eth, u64 path) + { ++ u32 val, mask, set, reg; + bool updated = true; +- u32 val, mask, set; + + switch (path) { + case MTK_ETH_PATH_GMAC1_SGMII: +@@ -59,10 +69,15 @@ static int set_mux_gdm1_to_gmac1_esw(str + break; + } + ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V3)) ++ reg = MTK_MAC_MISC_V3; ++ else ++ reg = MTK_MAC_MISC; ++ + if (updated) { +- val = mtk_r32(eth, MTK_MAC_MISC); ++ val = mtk_r32(eth, reg); + val = (val & mask) | set; +- mtk_w32(eth, val, MTK_MAC_MISC); ++ mtk_w32(eth, val, reg); + } + + dev_dbg(eth->dev, "path %s in %s updated = %d\n", +@@ -125,6 +140,31 @@ static int set_mux_u3_gmac2_to_qphy(stru + return 0; + } + ++static int set_mux_gmac2_to_2p5gphy(struct mtk_eth *eth, u64 path) ++{ ++ unsigned int val = 0; ++ bool updated = true; ++ int mac_id = 0; ++ ++ regmap_read(eth->ethsys, ETHSYS_SYSCFG0, &val); ++ ++ switch (path) { ++ case MTK_ETH_PATH_GMAC2_2P5GPHY: ++ val &= ~(u32)SYSCFG0_SGMII_GMAC2_V2; ++ mac_id = MTK_GMAC2_ID; ++ break; ++ default: ++ updated = false; ++ break; ++ }; ++ ++ if (updated) ++ regmap_update_bits(eth->ethsys, ETHSYS_SYSCFG0, ++ SYSCFG0_SGMII_MASK, val); ++ ++ return 0; ++} ++ + static int set_mux_gmac1_gmac2_to_sgmii_rgmii(struct mtk_eth *eth, u64 path) + { + unsigned int val = 0; +@@ -163,7 +203,61 @@ static int set_mux_gmac1_gmac2_to_sgmii_ + return 0; + } + +-static int set_mux_gmac12_to_gephy_sgmii(struct mtk_eth *eth, u64 path) ++static int set_mux_gmac123_to_usxgmii(struct mtk_eth *eth, u64 path) ++{ ++ unsigned int val = 0; ++ bool updated = true; ++ int mac_id = 0; ++ ++ dev_dbg(eth->dev, "path %s in %s updated = %d\n", ++ mtk_eth_path_name(path), __func__, updated); ++ ++ /* Disable SYSCFG1 SGMII */ ++ regmap_read(eth->ethsys, ETHSYS_SYSCFG0, &val); ++ ++ switch (path) { ++ case MTK_ETH_PATH_GMAC1_USXGMII: ++ val &= ~(u32)SYSCFG0_SGMII_GMAC1_V2; ++ mac_id = MTK_GMAC1_ID; ++ break; ++ case MTK_ETH_PATH_GMAC2_USXGMII: ++ val &= ~(u32)SYSCFG0_SGMII_GMAC2_V2; ++ mac_id = MTK_GMAC2_ID; ++ break; ++ case MTK_ETH_PATH_GMAC3_USXGMII: ++ val &= ~(u32)SYSCFG0_SGMII_GMAC3_V2; ++ mac_id = MTK_GMAC3_ID; ++ break; ++ default: ++ updated = false; ++ }; ++ ++ if (updated) { ++ regmap_update_bits(eth->ethsys, ETHSYS_SYSCFG0, ++ SYSCFG0_SGMII_MASK, val); ++ ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V3) && ++ mac_id == MTK_GMAC2_ID) { ++ regmap_update_bits(eth->infra, ++ TOP_MISC_NETSYS_PCS_MUX, ++ NETSYS_PCS_MUX_MASK, ++ MUX_G2_USXGMII_SEL); ++ } ++ } ++ ++ /* Enable XGDM Path */ ++ val = mtk_r32(eth, MTK_GDMA_EG_CTRL(mac_id)); ++ val |= MTK_GDMA_XGDM_SEL; ++ mtk_w32(eth, val, MTK_GDMA_EG_CTRL(mac_id)); ++ ++ dev_dbg(eth->dev, "path %s in %s updated = %d\n", ++ mtk_eth_path_name(path), __func__, updated); ++ ++ ++ return 0; ++} ++ ++static int set_mux_gmac123_to_gephy_sgmii(struct mtk_eth *eth, u64 path) + { + unsigned int val = 0; + bool updated = true; +@@ -180,6 +274,9 @@ static int set_mux_gmac12_to_gephy_sgmii + case MTK_ETH_PATH_GMAC2_SGMII: + val |= SYSCFG0_SGMII_GMAC2_V2; + break; ++ case MTK_ETH_PATH_GMAC3_SGMII: ++ val |= SYSCFG0_SGMII_GMAC3_V2; ++ break; + default: + updated = false; + } +@@ -208,13 +305,25 @@ static const struct mtk_eth_muxc mtk_eth + .cap_bit = MTK_ETH_MUX_U3_GMAC2_TO_QPHY, + .set_path = set_mux_u3_gmac2_to_qphy, + }, { ++ .name = "mux_gmac2_to_2p5gphy", ++ .cap_bit = MTK_ETH_MUX_GMAC2_TO_2P5GPHY, ++ .set_path = set_mux_gmac2_to_2p5gphy, ++ }, { + .name = "mux_gmac1_gmac2_to_sgmii_rgmii", + .cap_bit = MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII, + .set_path = set_mux_gmac1_gmac2_to_sgmii_rgmii, + }, { + .name = "mux_gmac12_to_gephy_sgmii", + .cap_bit = MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII, +- .set_path = set_mux_gmac12_to_gephy_sgmii, ++ .set_path = set_mux_gmac123_to_gephy_sgmii, ++ }, { ++ .name = "mux_gmac123_to_gephy_sgmii", ++ .cap_bit = MTK_ETH_MUX_GMAC123_TO_GEPHY_SGMII, ++ .set_path = set_mux_gmac123_to_gephy_sgmii, ++ }, { ++ .name = "mux_gmac123_to_usxgmii", ++ .cap_bit = MTK_ETH_MUX_GMAC123_TO_USXGMII, ++ .set_path = set_mux_gmac123_to_usxgmii, + }, + }; + +@@ -243,16 +352,46 @@ static int mtk_eth_mux_setup(struct mtk_ + } + } + ++ dev_dbg(eth->dev, "leaving mux_setup %s\n", ++ mtk_eth_path_name(path)); ++ + out: + return err; + } + ++int mtk_gmac_usxgmii_path_setup(struct mtk_eth *eth, int mac_id) ++{ ++ u64 path; ++ ++ path = (mac_id == MTK_GMAC1_ID) ? MTK_ETH_PATH_GMAC1_USXGMII : ++ (mac_id == MTK_GMAC2_ID) ? MTK_ETH_PATH_GMAC2_USXGMII : ++ MTK_ETH_PATH_GMAC3_USXGMII; ++ ++ /* Setup proper MUXes along the path */ ++ return mtk_eth_mux_setup(eth, path); ++} ++ + int mtk_gmac_sgmii_path_setup(struct mtk_eth *eth, int mac_id) + { + u64 path; + +- path = (mac_id == 0) ? MTK_ETH_PATH_GMAC1_SGMII : +- MTK_ETH_PATH_GMAC2_SGMII; ++ path = (mac_id == MTK_GMAC1_ID) ? MTK_ETH_PATH_GMAC1_SGMII : ++ (mac_id == MTK_GMAC2_ID) ? MTK_ETH_PATH_GMAC2_SGMII : ++ MTK_ETH_PATH_GMAC3_SGMII; ++ ++ /* Setup proper MUXes along the path */ ++ return mtk_eth_mux_setup(eth, path); ++} ++ ++int mtk_gmac_2p5gphy_path_setup(struct mtk_eth *eth, int mac_id) ++{ ++ u64 path = 0; ++ ++ if (mac_id == MTK_GMAC2_ID) ++ path = MTK_ETH_PATH_GMAC2_2P5GPHY; ++ ++ if (!path) ++ return -EINVAL; + + /* Setup proper MUXes along the path */ + return mtk_eth_mux_setup(eth, path); +@@ -282,4 +421,3 @@ int mtk_gmac_rgmii_path_setup(struct mtk + /* Setup proper MUXes along the path */ + return mtk_eth_mux_setup(eth, path); + } +- +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -480,6 +480,23 @@ static void mtk_gmac0_rgmii_adjust(struc + mtk_w32(eth, val, TRGMII_TCK_CTRL); + } + ++static void mtk_setup_bridge_switch(struct mtk_eth *eth) ++{ ++ int val; ++ ++ /* Force Port1 XGMAC Link Up */ ++ val = mtk_r32(eth, MTK_XGMAC_STS(MTK_GMAC1_ID)); ++ mtk_w32(eth, val | MTK_XGMAC_FORCE_LINK(MTK_GMAC1_ID), ++ MTK_XGMAC_STS(MTK_GMAC1_ID)); ++ ++ /* Adjust GSW bridge IPG to 11*/ ++ val = mtk_r32(eth, MTK_GSW_CFG); ++ val &= ~(GSWTX_IPG_MASK | GSWRX_IPG_MASK); ++ val |= (GSW_IPG_11 << GSWTX_IPG_SHIFT) | ++ (GSW_IPG_11 << GSWRX_IPG_SHIFT); ++ mtk_w32(eth, val, MTK_GSW_CFG); ++} ++ + static struct phylink_pcs *mtk_mac_select_pcs(struct phylink_config *config, + phy_interface_t interface) + { +@@ -494,6 +511,12 @@ static struct phylink_pcs *mtk_mac_selec + 0 : mac->id; + + return eth->sgmii_pcs[sid]; ++ } else if ((interface == PHY_INTERFACE_MODE_USXGMII || ++ interface == PHY_INTERFACE_MODE_10GKR || ++ interface == PHY_INTERFACE_MODE_5GBASER) && ++ MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V3) && ++ mac->id != MTK_GMAC1_ID) { ++ return mtk_usxgmii_select_pcs(eth, mac->id); + } + + return NULL; +@@ -505,7 +528,7 @@ static void mtk_mac_config(struct phylin + struct mtk_mac *mac = container_of(config, struct mtk_mac, + phylink_config); + struct mtk_eth *eth = mac->hw; +- int val, ge_mode, err = 0; ++ int val, ge_mode, force_link, err = 0; + u32 i; + + /* MT76x8 has no hardware settings between for the MAC */ +@@ -549,6 +572,23 @@ static void mtk_mac_config(struct phylin + goto init_err; + } + break; ++ case PHY_INTERFACE_MODE_USXGMII: ++ case PHY_INTERFACE_MODE_10GKR: ++ case PHY_INTERFACE_MODE_5GBASER: ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_USXGMII)) { ++ err = mtk_gmac_usxgmii_path_setup(eth, mac->id); ++ if (err) ++ goto init_err; ++ } ++ break; ++ case PHY_INTERFACE_MODE_INTERNAL: ++ if (mac->id == MTK_GMAC2_ID && ++ MTK_HAS_CAPS(eth->soc->caps, MTK_2P5GPHY)) { ++ err = mtk_gmac_2p5gphy_path_setup(eth, mac->id); ++ if (err) ++ goto init_err; ++ } ++ break; + default: + goto err_phy; + } +@@ -627,14 +667,78 @@ static void mtk_mac_config(struct phylin + SYSCFG0_SGMII_MASK, + ~(u32)SYSCFG0_SGMII_MASK); + ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V3)) { ++ mtk_xfi_pll_enable(eth); ++ mtk_sgmii_reset(eth, mac->id); ++ if (phylink_autoneg_inband(mode)) ++ mtk_sgmii_setup_phya_gen1(eth, mac->id); ++ else ++ mtk_sgmii_setup_phya_gen2(eth, mac->id); ++ } + /* Save the syscfg0 value for mac_finish */ + mac->syscfg0 = val; +- } else if (phylink_autoneg_inband(mode)) { ++ } else if (state->interface != PHY_INTERFACE_MODE_USXGMII && ++ state->interface != PHY_INTERFACE_MODE_10GKR && ++ state->interface != PHY_INTERFACE_MODE_5GBASER && ++ phylink_autoneg_inband(mode)) { + dev_err(eth->dev, +- "In-band mode not supported in non SGMII mode!\n"); ++ "In-band mode not supported in non-SerDes modes!\n"); + return; + } + ++ /* Setup gmac */ ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V3) && ++ (mtk_interface_mode_is_xgmii(state->interface) || ++ mac->interface == PHY_INTERFACE_MODE_INTERNAL)) { ++ mtk_w32(mac->hw, MTK_GDMA_XGDM_SEL, MTK_GDMA_EG_CTRL(mac->id)); ++ mtk_w32(mac->hw, MAC_MCR_FORCE_LINK_DOWN, MTK_MAC_MCR(mac->id)); ++ ++ switch (mac->id) { ++ case MTK_GMAC1_ID: ++ mtk_setup_bridge_switch(eth); ++ break; ++ case MTK_GMAC2_ID: ++ force_link = (mac->interface == ++ PHY_INTERFACE_MODE_INTERNAL) ? ++ MTK_XGMAC_FORCE_LINK(mac->id) : 0; ++ val = mtk_r32(eth, MTK_XGMAC_STS(mac->id)); ++ mtk_w32(eth, val | force_link, ++ MTK_XGMAC_STS(mac->id)); ++ break; ++ case MTK_GMAC3_ID: ++ val = mtk_r32(eth, MTK_XGMAC_STS(mac->id)); ++ mtk_w32(eth, val | MTK_XGMAC_FORCE_LINK(mac->id), ++ MTK_XGMAC_STS(mac->id)); ++ break; ++ } ++ } else { ++ val = mtk_r32(eth, MTK_GDMA_EG_CTRL(mac->id)); ++ mtk_w32(eth, val & ~MTK_GDMA_XGDM_SEL, ++ MTK_GDMA_EG_CTRL(mac->id)); ++ ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V3)) { ++ switch (mac->id) { ++ case MTK_GMAC2_ID: ++ case MTK_GMAC3_ID: ++ val = mtk_r32(eth, MTK_XGMAC_STS(mac->id)); ++ mtk_w32(eth, ++ val & ~MTK_XGMAC_FORCE_LINK(mac->id), ++ MTK_XGMAC_STS(mac->id)); ++ break; ++ } ++ } ++ ++/* ++ if (mac->type != mac_type) { ++ if (atomic_read(&reset_pending) == 0) { ++ atomic_inc(&force); ++ schedule_work(ð->pending_work); ++ atomic_inc(&reset_pending); ++ } else ++ atomic_dec(&reset_pending); ++ } ++*/ ++ } + return; + + err_phy: +@@ -675,11 +779,40 @@ static int mtk_mac_finish(struct phylink + return 0; + } + +-static void mtk_mac_pcs_get_state(struct phylink_config *config, ++static void mtk_xgdm_pcs_get_state(struct mtk_mac *mac, ++ struct phylink_link_state *state) ++{ ++ u32 sts = mtk_r32(mac->hw, MTK_XGMAC_STS(mac->id)); ++ ++ if (mac->id == MTK_GMAC2_ID) ++ sts = sts >> 16; ++ ++ state->link = FIELD_GET(MTK_USXGMII_PCS_LINK, sts); ++ if (!state->link) ++ return; ++ ++ state->duplex = DUPLEX_FULL; ++ state->interface = mac->interface; ++ ++ switch (FIELD_GET(MTK_USXGMII_PCS_MODE, sts)) { ++ case 0: ++ state->speed = SPEED_10000; ++ break; ++ case 1: ++ state->speed = SPEED_5000; ++ break; ++ case 2: ++ state->speed = SPEED_2500; ++ break; ++ case 3: ++ state->speed = SPEED_1000; ++ break; ++ } ++} ++ ++static void mtk_gdm_pcs_get_state(struct mtk_mac *mac, + struct phylink_link_state *state) + { +- struct mtk_mac *mac = container_of(config, struct mtk_mac, +- phylink_config); + u32 pmsr = mtk_r32(mac->hw, MTK_MAC_MSR(mac->id)); + + state->link = (pmsr & MAC_MSR_LINK); +@@ -707,15 +840,35 @@ static void mtk_mac_pcs_get_state(struct + state->pause |= MLO_PAUSE_TX; + } + ++static void mtk_mac_pcs_get_state(struct phylink_config *config, ++ struct phylink_link_state *state) ++{ ++ struct mtk_mac *mac = container_of(config, struct mtk_mac, ++ phylink_config); ++ ++ if (mtk_interface_mode_is_xgmii(state->interface)) ++ mtk_xgdm_pcs_get_state(mac, state); ++ else ++ mtk_gdm_pcs_get_state(mac, state); ++} ++ + static void mtk_mac_link_down(struct phylink_config *config, unsigned int mode, + phy_interface_t interface) + { + struct mtk_mac *mac = container_of(config, struct mtk_mac, + phylink_config); +- u32 mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id)); ++ u32 mcr; + +- mcr &= ~(MAC_MCR_TX_EN | MAC_MCR_RX_EN); +- mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id)); ++ if (!mtk_interface_mode_is_xgmii(interface)) { ++ mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id)); ++ mcr &= ~(MAC_MCR_TX_EN | MAC_MCR_RX_EN); ++ mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id)); ++ } else if (mac->id != MTK_GMAC1_ID) { ++ mcr = mtk_r32(mac->hw, MTK_XMAC_MCR(mac->id)); ++ mcr &= 0xfffffff0; ++ mcr |= XMAC_MCR_TRX_DISABLE; ++ mtk_w32(mac->hw, mcr, MTK_XMAC_MCR(mac->id)); ++ } + } + + static void mtk_set_queue_speed(struct mtk_eth *eth, unsigned int idx, +@@ -787,13 +940,11 @@ static void mtk_set_queue_speed(struct m + mtk_w32(eth, val, soc->reg_map->qdma.qtx_sch + ofs); + } + +-static void mtk_mac_link_up(struct phylink_config *config, +- struct phy_device *phy, +- unsigned int mode, phy_interface_t interface, +- int speed, int duplex, bool tx_pause, bool rx_pause) ++static void mtk_gdm_mac_link_up(struct mtk_mac *mac, ++ struct phy_device *phy, ++ unsigned int mode, phy_interface_t interface, ++ int speed, int duplex, bool tx_pause, bool rx_pause) + { +- struct mtk_mac *mac = container_of(config, struct mtk_mac, +- phylink_config); + u32 mcr; + + mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id)); +@@ -827,6 +978,47 @@ static void mtk_mac_link_up(struct phyli + mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id)); + } + ++static void mtk_xgdm_mac_link_up(struct mtk_mac *mac, ++ struct phy_device *phy, ++ unsigned int mode, phy_interface_t interface, ++ int speed, int duplex, bool tx_pause, bool rx_pause) ++{ ++ u32 mcr; ++ ++ if (mac->id == MTK_GMAC1_ID) ++ return; ++ ++ mcr = mtk_r32(mac->hw, MTK_XMAC_MCR(mac->id)); ++ ++ mcr &= ~(XMAC_MCR_FORCE_TX_FC | XMAC_MCR_FORCE_RX_FC); ++ /* Configure pause modes - ++ * phylink will avoid these for half duplex ++ */ ++ if (tx_pause) ++ mcr |= XMAC_MCR_FORCE_TX_FC; ++ if (rx_pause) ++ mcr |= XMAC_MCR_FORCE_RX_FC; ++ ++ mcr &= ~(XMAC_MCR_TRX_DISABLE); ++ mtk_w32(mac->hw, mcr, MTK_XMAC_MCR(mac->id)); ++} ++ ++static void mtk_mac_link_up(struct phylink_config *config, ++ struct phy_device *phy, ++ unsigned int mode, phy_interface_t interface, ++ int speed, int duplex, bool tx_pause, bool rx_pause) ++{ ++ struct mtk_mac *mac = container_of(config, struct mtk_mac, ++ phylink_config); ++ ++ if (mtk_interface_mode_is_xgmii(interface)) ++ mtk_xgdm_mac_link_up(mac, phy, mode, interface, speed, duplex, ++ tx_pause, rx_pause); ++ else ++ mtk_gdm_mac_link_up(mac, phy, mode, interface, speed, duplex, ++ tx_pause, rx_pause); ++} ++ + static const struct phylink_mac_ops mtk_phylink_ops = { + .validate = phylink_generic_validate, + .mac_select_pcs = mtk_mac_select_pcs, +@@ -880,10 +1072,21 @@ static int mtk_mdio_init(struct mtk_eth + } + divider = min_t(unsigned int, DIV_ROUND_UP(MDC_MAX_FREQ, max_clk), 63); + ++ /* Configure MDC Turbo Mode */ ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V3)) { ++ val = mtk_r32(eth, MTK_MAC_MISC_V3); ++ val |= MISC_MDC_TURBO; ++ mtk_w32(eth, val, MTK_MAC_MISC_V3); ++ } else { ++ val = mtk_r32(eth, MTK_PPSC); ++ val |= PPSC_MDC_TURBO; ++ mtk_w32(eth, val, MTK_PPSC); ++ } ++ + /* Configure MDC Divider */ + val = mtk_r32(eth, MTK_PPSC); + val &= ~PPSC_MDC_CFG; +- val |= FIELD_PREP(PPSC_MDC_CFG, divider) | PPSC_MDC_TURBO; ++ val |= FIELD_PREP(PPSC_MDC_CFG, divider); + mtk_w32(eth, val, MTK_PPSC); + + dev_dbg(eth->dev, "MDC is running on %d Hz\n", MDC_MAX_FREQ / divider); +@@ -4487,8 +4690,8 @@ static int mtk_add_mac(struct mtk_eth *e + const __be32 *_id = of_get_property(np, "reg", NULL); + phy_interface_t phy_mode; + struct phylink *phylink; +- struct mtk_mac *mac; + int id, err; ++ struct mtk_mac *mac; + int txqs = 1; + + if (!_id) { +@@ -4579,6 +4782,32 @@ static int mtk_add_mac(struct mtk_eth *e + mac->phylink_config.supported_interfaces); + } + ++ if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_USXGMII)) { ++ if (id == MTK_GMAC1_ID) { ++ mac->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | ++ MAC_SYM_PAUSE | ++ MAC_10000FD; ++ phy_interface_zero( ++ mac->phylink_config.supported_interfaces); ++ __set_bit(PHY_INTERFACE_MODE_INTERNAL, ++ mac->phylink_config.supported_interfaces); ++ } else { ++ mac->phylink_config.mac_capabilities |= MAC_5000FD | MAC_10000FD; ++ __set_bit(PHY_INTERFACE_MODE_5GBASER, ++ mac->phylink_config.supported_interfaces); ++ __set_bit(PHY_INTERFACE_MODE_10GKR, ++ mac->phylink_config.supported_interfaces); ++ __set_bit(PHY_INTERFACE_MODE_USXGMII, ++ mac->phylink_config.supported_interfaces); ++ } ++ } ++ ++ if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_2P5GPHY)) { ++ if (id == MTK_GMAC2_ID) ++ __set_bit(PHY_INTERFACE_MODE_INTERNAL, ++ mac->phylink_config.supported_interfaces); ++ } ++ + phylink = phylink_create(&mac->phylink_config, + of_fwnode_handle(mac->of_node), + phy_mode, &mtk_phylink_ops); +@@ -4766,6 +4995,13 @@ static int mtk_probe(struct platform_dev + + if (err) + return err; ++ } ++ ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_USXGMII)) { ++ err = mtk_usxgmii_init(eth); ++ ++ if (err) ++ return err; + } + + if (eth->soc->required_pctl) { +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -126,6 +126,11 @@ + #define MTK_GDMA_TO_PDMA 0x0 + #define MTK_GDMA_DROP_ALL 0x7777 + ++/* GDM Egress Control Register */ ++#define MTK_GDMA_EG_CTRL(x) ((x == MTK_GMAC3_ID) ? \ ++ 0x544 : 0x504 + (x * 0x1000)) ++#define MTK_GDMA_XGDM_SEL BIT(31) ++ + /* Unicast Filter MAC Address Register - Low */ + #define MTK_GDMA_MAC_ADRL(x) (0x508 + (x * 0x1000)) + +@@ -389,7 +394,26 @@ + #define PHY_IAC_TIMEOUT HZ + + #define MTK_MAC_MISC 0x1000c ++#define MTK_MAC_MISC_V3 0x10010 + #define MTK_MUX_TO_ESW BIT(0) ++#define MISC_MDC_TURBO BIT(4) ++ ++/* XMAC status registers */ ++#define MTK_XGMAC_STS(x) ((x == MTK_GMAC3_ID) ? 0x1001C : 0x1000C) ++#define MTK_XGMAC_FORCE_LINK(x) ((x == MTK_GMAC2_ID) ? BIT(31) : BIT(15)) ++#define MTK_USXGMII_PCS_LINK BIT(8) ++#define MTK_XGMAC_RX_FC BIT(5) ++#define MTK_XGMAC_TX_FC BIT(4) ++#define MTK_USXGMII_PCS_MODE GENMASK(3, 1) ++#define MTK_XGMAC_LINK_STS BIT(0) ++ ++/* GSW bridge registers */ ++#define MTK_GSW_CFG (0x10080) ++#define GSWTX_IPG_MASK GENMASK(19, 16) ++#define GSWTX_IPG_SHIFT 16 ++#define GSWRX_IPG_MASK GENMASK(3, 0) ++#define GSWRX_IPG_SHIFT 0 ++#define GSW_IPG_11 11 + + /* Mac control registers */ + #define MTK_MAC_MCR(x) (0x10100 + (x * 0x100)) +@@ -414,6 +438,17 @@ + #define MAC_MCR_FORCE_LINK BIT(0) + #define MAC_MCR_FORCE_LINK_DOWN (MAC_MCR_FORCE_MODE) + ++/* Mac EEE control registers */ ++#define MTK_MAC_EEE(x) (0x10104 + (x * 0x100)) ++#define MAC_EEE_WAKEUP_TIME_1000 GENMASK(31, 24) ++#define MAC_EEE_WAKEUP_TIME_100 GENMASK(23, 16) ++#define MAC_EEE_LPI_TXIDLE_THD GENMASK(15, 8) ++#define MAC_EEE_RESV0 GENMASK(7, 4) ++#define MAC_EEE_CKG_TXILDE BIT(3) ++#define MAC_EEE_CKG_RXLPI BIT(2) ++#define MAC_EEE_TX_DOWN_REQ BIT(1) ++#define MAC_EEE_LPI_MODE BIT(0) ++ + /* Mac status registers */ + #define MTK_MAC_MSR(x) (0x10108 + (x * 0x100)) + #define MAC_MSR_EEE1G BIT(7) +@@ -458,6 +493,12 @@ + #define INTF_MODE_RGMII_1000 (TRGMII_MODE | TRGMII_CENTRAL_ALIGNED) + #define INTF_MODE_RGMII_10_100 0 + ++/* XFI Mac control registers */ ++#define MTK_XMAC_MCR(x) (0x12000 + ((x - 1) * 0x1000)) ++#define XMAC_MCR_TRX_DISABLE 0xf ++#define XMAC_MCR_FORCE_TX_FC BIT(5) ++#define XMAC_MCR_FORCE_RX_FC BIT(4) ++ + /* GPIO port control registers for GMAC 2*/ + #define GPIO_OD33_CTRL8 0x4c0 + #define GPIO_BIAS_CTRL 0xed0 +@@ -483,6 +524,7 @@ + #define SYSCFG0_SGMII_GMAC2 ((3 << 8) & SYSCFG0_SGMII_MASK) + #define SYSCFG0_SGMII_GMAC1_V2 BIT(9) + #define SYSCFG0_SGMII_GMAC2_V2 BIT(8) ++#define SYSCFG0_SGMII_GMAC3_V2 BIT(7) + + + /* ethernet subsystem clock register */ +@@ -509,16 +551,91 @@ + #define ETHSYS_DMA_AG_MAP_QDMA BIT(1) + #define ETHSYS_DMA_AG_MAP_PPE BIT(2) + ++/* USXGMII subsystem config registers */ ++/* Register to control speed */ ++#define RG_PHY_TOP_SPEED_CTRL1 0x80C ++#define USXGMII_RATE_UPDATE_MODE BIT(31) ++#define USXGMII_MAC_CK_GATED BIT(29) ++#define USXGMII_IF_FORCE_EN BIT(28) ++#define USXGMII_RATE_ADAPT_MODE GENMASK(10, 8) ++#define USXGMII_RATE_ADAPT_MODE_X1 0 ++#define USXGMII_RATE_ADAPT_MODE_X2 1 ++#define USXGMII_RATE_ADAPT_MODE_X4 2 ++#define USXGMII_RATE_ADAPT_MODE_X10 3 ++#define USXGMII_RATE_ADAPT_MODE_X100 4 ++#define USXGMII_RATE_ADAPT_MODE_X5 5 ++#define USXGMII_RATE_ADAPT_MODE_X50 6 ++#define USXGMII_XFI_RX_MODE GENMASK(6, 4) ++#define USXGMII_XFI_RX_MODE_10G 0 ++#define USXGMII_XFI_RX_MODE_5G 1 ++#define USXGMII_XFI_TX_MODE GENMASK(2, 0) ++#define USXGMII_XFI_TX_MODE_10G 0 ++#define USXGMII_XFI_TX_MODE_5G 1 ++ ++/* Register to control PCS AN */ ++#define RG_PCS_AN_CTRL0 0x810 ++#define USXGMII_AN_RESTART BIT(31) ++#define USXGMII_AN_SYNC_CNT GENMASK(30, 11) ++#define USXGMII_AN_ENABLE BIT(0) ++ ++#define RG_PCS_AN_CTRL2 0x818 ++#define USXGMII_LINK_TIMER_IDLE_DETECT GENMASK(29, 20) ++#define USXGMII_LINK_TIMER_COMP_ACK_DETECT GENMASK(19, 10) ++#define USXGMII_LINK_TIMER_AN_RESTART GENMASK(9, 0) ++ ++/* Register to read PCS AN status */ ++#define RG_PCS_AN_STS0 0x81c ++#define USXGMII_LPA_SPEED_MASK GENMASK(11, 9) ++#define USXGMII_LPA_SPEED_10 0 ++#define USXGMII_LPA_SPEED_100 1 ++#define USXGMII_LPA_SPEED_1000 2 ++#define USXGMII_LPA_SPEED_10000 3 ++#define USXGMII_LPA_SPEED_2500 4 ++#define USXGMII_LPA_SPEED_5000 5 ++#define USXGMII_LPA_DUPLEX BIT(12) ++#define USXGMII_LPA_LINK BIT(15) ++#define USXGMII_LPA_LATCH BIT(31) ++ ++/* Register to control USXGMII XFI PLL digital */ ++#define XFI_PLL_DIG_GLB8 0x08 ++#define RG_XFI_PLL_EN BIT(31) ++ ++/* Register to control USXGMII XFI PLL analog */ ++#define XFI_PLL_ANA_GLB8 0x108 ++#define RG_XFI_PLL_ANA_SWWA 0x02283248 ++ + /* Infrasys subsystem config registers */ + #define INFRA_MISC2 0x70c + #define CO_QPHY_SEL BIT(0) + #define GEPHY_MAC_SEL BIT(1) + ++/* Toprgu subsystem config registers */ ++#define TOPRGU_SWSYSRST 0x18 ++#define SWSYSRST_UNLOCK_KEY GENMASK(31, 24) ++#define SWSYSRST_XFI_PLL_GRST BIT(16) ++#define SWSYSRST_XFI_PEXPT1_GRST BIT(15) ++#define SWSYSRST_XFI_PEXPT0_GRST BIT(14) ++#define SWSYSRST_XFI1_GRST BIT(13) ++#define SWSYSRST_XFI0_GRST BIT(12) ++#define SWSYSRST_SGMII1_GRST BIT(2) ++#define SWSYSRST_SGMII0_GRST BIT(1) ++#define TOPRGU_SWSYSRST_EN 0xFC ++ + /* Top misc registers */ ++#define TOP_MISC_NETSYS_PCS_MUX 0x84 ++#define NETSYS_PCS_MUX_MASK GENMASK(1, 0) ++#define MUX_G2_USXGMII_SEL BIT(1) ++#define MUX_HSGMII1_G1_SEL BIT(0) ++ + #define USB_PHY_SWITCH_REG 0x218 + #define QPHY_SEL_MASK GENMASK(1, 0) + #define SGMII_QPHY_SEL 0x2 + ++/* MDIO control */ ++#define MII_MMD_ACC_CTL_REG 0x0d ++#define MII_MMD_ADDR_DATA_REG 0x0e ++#define MMD_OP_MODE_DATA BIT(14) ++ + /* MT7628/88 specific stuff */ + #define MT7628_PDMA_OFFSET 0x0800 + #define MT7628_SDM_OFFSET 0x0c00 +@@ -812,13 +929,6 @@ enum mtk_gmac_id { + MTK_GMAC_ID_MAX + }; + +-/* GDM Type */ +-enum mtk_gdm_type { +- MTK_GDM_TYPE = 0, +- MTK_XGDM_TYPE, +- MTK_GDM_TYPE_MAX +-}; +- + enum mtk_tx_buf_type { + MTK_TYPE_SKB, + MTK_TYPE_XDP_TX, +@@ -905,6 +1015,7 @@ enum mkt_eth_capabilities { + MTK_TRGMII_BIT, + MTK_SGMII_BIT, + MTK_USXGMII_BIT, ++ MTK_2P5GPHY_BIT, + MTK_ESW_BIT, + MTK_GEPHY_BIT, + MTK_MUX_BIT, +@@ -925,6 +1036,7 @@ enum mkt_eth_capabilities { + MTK_ETH_MUX_GDM1_TO_GMAC1_ESW_BIT, + MTK_ETH_MUX_GMAC2_GMAC0_TO_GEPHY_BIT, + MTK_ETH_MUX_U3_GMAC2_TO_QPHY_BIT, ++ MTK_ETH_MUX_GMAC2_TO_2P5GPHY_BIT, + MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII_BIT, + MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII_BIT, + MTK_ETH_MUX_GMAC123_TO_GEPHY_SGMII_BIT, +@@ -936,6 +1048,7 @@ enum mkt_eth_capabilities { + MTK_ETH_PATH_GMAC1_SGMII_BIT, + MTK_ETH_PATH_GMAC2_RGMII_BIT, + MTK_ETH_PATH_GMAC2_SGMII_BIT, ++ MTK_ETH_PATH_GMAC2_2P5GPHY_BIT, + MTK_ETH_PATH_GMAC2_GEPHY_BIT, + MTK_ETH_PATH_GMAC3_SGMII_BIT, + MTK_ETH_PATH_GDM1_ESW_BIT, +@@ -949,6 +1062,7 @@ enum mkt_eth_capabilities { + #define MTK_TRGMII BIT_ULL(MTK_TRGMII_BIT) + #define MTK_SGMII BIT_ULL(MTK_SGMII_BIT) + #define MTK_USXGMII BIT_ULL(MTK_USXGMII_BIT) ++#define MTK_2P5GPHY BIT_ULL(MTK_2P5GPHY_BIT) + #define MTK_ESW BIT_ULL(MTK_ESW_BIT) + #define MTK_GEPHY BIT_ULL(MTK_GEPHY_BIT) + #define MTK_MUX BIT_ULL(MTK_MUX_BIT) +@@ -971,6 +1085,8 @@ enum mkt_eth_capabilities { + BIT_ULL(MTK_ETH_MUX_GMAC2_GMAC0_TO_GEPHY_BIT) + #define MTK_ETH_MUX_U3_GMAC2_TO_QPHY \ + BIT_ULL(MTK_ETH_MUX_U3_GMAC2_TO_QPHY_BIT) ++#define MTK_ETH_MUX_GMAC2_TO_2P5GPHY \ ++ BIT_ULL(MTK_ETH_MUX_GMAC2_TO_2P5GPHY_BIT) + #define MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII \ + BIT_ULL(MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII_BIT) + #define MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII \ +@@ -986,6 +1102,7 @@ enum mkt_eth_capabilities { + #define MTK_ETH_PATH_GMAC1_SGMII BIT_ULL(MTK_ETH_PATH_GMAC1_SGMII_BIT) + #define MTK_ETH_PATH_GMAC2_RGMII BIT_ULL(MTK_ETH_PATH_GMAC2_RGMII_BIT) + #define MTK_ETH_PATH_GMAC2_SGMII BIT_ULL(MTK_ETH_PATH_GMAC2_SGMII_BIT) ++#define MTK_ETH_PATH_GMAC2_2P5GPHY BIT_ULL(MTK_ETH_PATH_GMAC2_2P5GPHY_BIT) + #define MTK_ETH_PATH_GMAC2_GEPHY BIT_ULL(MTK_ETH_PATH_GMAC2_GEPHY_BIT) + #define MTK_ETH_PATH_GMAC3_SGMII BIT_ULL(MTK_ETH_PATH_GMAC3_SGMII_BIT) + #define MTK_ETH_PATH_GDM1_ESW BIT_ULL(MTK_ETH_PATH_GDM1_ESW_BIT) +@@ -999,6 +1116,7 @@ enum mkt_eth_capabilities { + #define MTK_GMAC2_RGMII (MTK_ETH_PATH_GMAC2_RGMII | MTK_RGMII) + #define MTK_GMAC2_SGMII (MTK_ETH_PATH_GMAC2_SGMII | MTK_SGMII) + #define MTK_GMAC2_GEPHY (MTK_ETH_PATH_GMAC2_GEPHY | MTK_GEPHY) ++#define MTK_GMAC2_2P5GPHY (MTK_ETH_PATH_GMAC2_2P5GPHY | MTK_2P5GPHY) + #define MTK_GMAC3_SGMII (MTK_ETH_PATH_GMAC3_SGMII | MTK_SGMII) + #define MTK_GDM1_ESW (MTK_ETH_PATH_GDM1_ESW | MTK_ESW) + #define MTK_GMAC1_USXGMII (MTK_ETH_PATH_GMAC1_USXGMII | MTK_USXGMII) +@@ -1022,6 +1140,10 @@ enum mkt_eth_capabilities { + (MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII | MTK_MUX | \ + MTK_SHARED_SGMII) + ++/* 2: GMAC2 -> XGMII */ ++#define MTK_MUX_GMAC2_TO_2P5GPHY \ ++ (MTK_ETH_MUX_GMAC2_TO_2P5GPHY | MTK_MUX | MTK_INFRA) ++ + /* 0: GMACx -> GEPHY, 1: GMACx -> SGMII where x is 1 or 2 */ + #define MTK_MUX_GMAC12_TO_GEPHY_SGMII \ + (MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII | MTK_MUX) +@@ -1080,7 +1202,8 @@ enum mkt_eth_capabilities { + MTK_MUX_GMAC123_TO_GEPHY_SGMII | \ + MTK_NETSYS_V3 | MTK_RSTCTRL_PPE1 | \ + MTK_GMAC1_USXGMII | MTK_GMAC2_USXGMII | \ +- MTK_GMAC3_USXGMII | MTK_MUX_GMAC123_TO_USXGMII) ++ MTK_GMAC3_USXGMII | MTK_MUX_GMAC123_TO_USXGMII | \ ++ MTK_GMAC2_2P5GPHY | MTK_MUX_GMAC2_TO_2P5GPHY) + + struct mtk_tx_dma_desc_info { + dma_addr_t addr; +@@ -1186,6 +1309,22 @@ struct mtk_soc_data { + + #define MTK_DMA_MONITOR_TIMEOUT msecs_to_jiffies(1000) + ++/* struct mtk_usxgmii_pcs - This structure holds each usxgmii regmap and ++ * associated data ++ * @regmap: The register map pointing at the range used to setup ++ * USXGMII modes ++ * @interface: Currently selected interface mode ++ * @id: The element is used to record the index of PCS ++ * @pcs: Phylink PCS structure ++ */ ++struct mtk_usxgmii_pcs { ++ struct mtk_eth *eth; ++ struct regmap *regmap; ++ phy_interface_t interface; ++ u8 id; ++ struct phylink_pcs pcs; ++}; ++ + /* struct mtk_eth - This is the main datasructure for holding the state + * of the driver + * @dev: The device pointer +@@ -1206,6 +1345,11 @@ struct mtk_soc_data { + * @infra: The register map pointing at the range used to setup + * SGMII and GePHY path + * @sgmii_pcs: Pointers to mtk-pcs-lynxi phylink_pcs instances ++ * @usxgmii_pll: The register map pointing at the range used to control ++ * the USXGMII SerDes PLL ++ * @regmap_pextp: The register map pointing at the range used to setup ++ * PHYA ++ * @usxgmii_pcs: Pointer to array of pointers to struct for USXGMII PCS + * @pctl: The register map pointing at the range used to setup + * GMAC port drive/slew values + * @dma_refcnt: track how many netdevs are using the DMA engine +@@ -1247,7 +1391,11 @@ struct mtk_eth { + unsigned long sysclk; + struct regmap *ethsys; + struct regmap *infra; ++ struct regmap *toprgu; + struct phylink_pcs **sgmii_pcs; ++ struct regmap *usxgmii_pll; ++ struct regmap **regmap_pextp; ++ struct mtk_usxgmii_pcs **usxgmii_pcs; + struct regmap *pctl; + bool hwlro; + refcount_t dma_refcnt; +@@ -1403,6 +1551,19 @@ static inline u32 mtk_get_ib2_multicast_ + return MTK_FOE_IB2_MULTICAST; + } + ++static inline bool mtk_interface_mode_is_xgmii(phy_interface_t interface) ++{ ++ switch (interface) { ++ case PHY_INTERFACE_MODE_USXGMII: ++ case PHY_INTERFACE_MODE_10GKR: ++ case PHY_INTERFACE_MODE_5GBASER: ++ return true; ++ break; ++ default: ++ return false; ++ } ++} ++ + /* read the hardware status register */ + void mtk_stats_update_mac(struct mtk_mac *mac); + +@@ -1410,8 +1571,10 @@ void mtk_w32(struct mtk_eth *eth, u32 va + u32 mtk_r32(struct mtk_eth *eth, unsigned reg); + + int mtk_gmac_sgmii_path_setup(struct mtk_eth *eth, int mac_id); ++int mtk_gmac_2p5gphy_path_setup(struct mtk_eth *eth, int mac_id); + int mtk_gmac_gephy_path_setup(struct mtk_eth *eth, int mac_id); + int mtk_gmac_rgmii_path_setup(struct mtk_eth *eth, int mac_id); ++int mtk_gmac_usxgmii_path_setup(struct mtk_eth *eth, int mac_id); + + int mtk_eth_offload_init(struct mtk_eth *eth); + int mtk_eth_setup_tc(struct net_device *dev, enum tc_setup_type type, +@@ -1421,5 +1584,20 @@ int mtk_flow_offload_cmd(struct mtk_eth + void mtk_flow_offload_cleanup(struct mtk_eth *eth, struct list_head *list); + void mtk_eth_set_dma_device(struct mtk_eth *eth, struct device *dma_dev); + ++#ifdef CONFIG_NET_MEDIATEK_SOC_USXGMII ++struct phylink_pcs *mtk_usxgmii_select_pcs(struct mtk_eth *eth, int id); ++int mtk_usxgmii_init(struct mtk_eth *eth); ++int mtk_xfi_pll_enable(struct mtk_eth *eth); ++void mtk_sgmii_setup_phya_gen1(struct mtk_eth *eth, int mac_id); ++void mtk_sgmii_setup_phya_gen2(struct mtk_eth *eth, int mac_id); ++void mtk_sgmii_reset(struct mtk_eth *eth, int mac_id); ++#else ++static inline struct phylink_pcs *mtk_usxgmii_select_pcs(struct mtk_eth *eth, int id) { return NULL; } ++static inline int mtk_usxgmii_init(struct mtk_eth *eth) { return 0; } ++static inline int mtk_xfi_pll_enable(struct mtk_eth *eth) { return 0; } ++static inline void mtk_sgmii_setup_phya_gen1(struct mtk_eth *eth, int mac_id) { } ++static inline void mtk_sgmii_setup_phya_gen2(struct mtk_eth *eth, int mac_id) { } ++static inline void mtk_sgmii_reset(struct mtk_eth *eth, int mac_id) { } ++#endif /* NET_MEDIATEK_SOC_USXGMII */ + + #endif /* MTK_ETH_H */ +--- /dev/null ++++ b/drivers/net/ethernet/mediatek/mtk_usxgmii.c +@@ -0,0 +1,835 @@ ++/* SPDX-License-Identifier: GPL-2.0 ++ * ++ * Copyright (c) 2022 MediaTek Inc. ++ * Author: Henry Yen ++ * Daniel Golle ++ */ ++ ++#include ++#include ++#include ++#include "mtk_eth_soc.h" ++ ++static struct mtk_usxgmii_pcs *pcs_to_mtk_usxgmii_pcs(struct phylink_pcs *pcs) ++{ ++ return container_of(pcs, struct mtk_usxgmii_pcs, pcs); ++} ++ ++static int mtk_xfi_pextp_init(struct mtk_eth *eth) ++{ ++ struct device *dev = eth->dev; ++ struct device_node *r = dev->of_node; ++ struct device_node *np; ++ int i; ++ ++ eth->regmap_pextp = devm_kcalloc(dev, eth->soc->num_devs, sizeof(eth->regmap_pextp), GFP_KERNEL); ++ if (!eth->regmap_pextp) ++ return -ENOMEM; ++ ++ for (i = 0; i < eth->soc->num_devs; i++) { ++ np = of_parse_phandle(r, "mediatek,xfi_pextp", i); ++ if (!np) ++ break; ++ ++ eth->regmap_pextp[i] = syscon_node_to_regmap(np); ++ if (IS_ERR(eth->regmap_pextp[i])) ++ return PTR_ERR(eth->regmap_pextp[i]); ++ } ++ ++ return 0; ++} ++ ++static int mtk_xfi_pll_init(struct mtk_eth *eth) ++{ ++ struct device_node *r = eth->dev->of_node; ++ struct device_node *np; ++ ++ np = of_parse_phandle(r, "mediatek,xfi_pll", 0); ++ if (!np) ++ return -1; ++ ++ eth->usxgmii_pll = syscon_node_to_regmap(np); ++ if (IS_ERR(eth->usxgmii_pll)) ++ return PTR_ERR(eth->usxgmii_pll); ++ ++ return 0; ++} ++ ++static int mtk_toprgu_init(struct mtk_eth *eth) ++{ ++ struct device_node *r = eth->dev->of_node; ++ struct device_node *np; ++ ++ np = of_parse_phandle(r, "mediatek,toprgu", 0); ++ if (!np) ++ return -1; ++ ++ eth->toprgu = syscon_node_to_regmap(np); ++ if (IS_ERR(eth->toprgu)) ++ return PTR_ERR(eth->toprgu); ++ ++ return 0; ++} ++ ++int mtk_xfi_pll_enable(struct mtk_eth *eth) ++{ ++ u32 val = 0; ++ ++ if (!eth->usxgmii_pll) ++ return -EINVAL; ++ ++ /* Add software workaround for USXGMII PLL TCL issue */ ++ regmap_write(eth->usxgmii_pll, XFI_PLL_ANA_GLB8, RG_XFI_PLL_ANA_SWWA); ++ ++ regmap_read(eth->usxgmii_pll, XFI_PLL_DIG_GLB8, &val); ++ val |= RG_XFI_PLL_EN; ++ regmap_write(eth->usxgmii_pll, XFI_PLL_DIG_GLB8, val); ++ ++ return 0; ++} ++ ++static int mtk_mac2xgmii_id(struct mtk_eth *eth, int mac_id) ++{ ++ int xgmii_id = mac_id; ++ ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V3)) { ++ switch (mac_id) { ++ case MTK_GMAC1_ID: ++ case MTK_GMAC2_ID: ++ xgmii_id = 1; ++ break; ++ case MTK_GMAC3_ID: ++ xgmii_id = 0; ++ break; ++ default: ++ xgmii_id = -1; ++ } ++ } ++ ++ return xgmii_id; ++} ++ ++static int mtk_xgmii2mac_id(struct mtk_eth *eth, int xgmii_id) ++{ ++ int mac_id = xgmii_id; ++ ++ if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V3)) { ++ switch (xgmii_id) { ++ case 0: ++ mac_id = 2; ++ break; ++ case 1: ++ mac_id = 1; ++ break; ++ default: ++ mac_id = -1; ++ } ++ } ++ ++ return mac_id; ++} ++ ++ ++static void mtk_usxgmii_setup_phya_usxgmii(struct mtk_usxgmii_pcs *mpcs) ++{ ++ struct regmap *pextp; ++ ++ if (!mpcs->eth) ++ return; ++ ++ pextp = mpcs->eth->regmap_pextp[mpcs->id]; ++ if (!pextp) ++ return; ++ ++ /* Setup operation mode */ ++ regmap_write(pextp, 0x9024, 0x00C9071C); ++ regmap_write(pextp, 0x2020, 0xAA8585AA); ++ regmap_write(pextp, 0x2030, 0x0C020707); ++ regmap_write(pextp, 0x2034, 0x0E050F0F); ++ regmap_write(pextp, 0x2040, 0x00140032); ++ regmap_write(pextp, 0x50F0, 0x00C014AA); ++ regmap_write(pextp, 0x50E0, 0x3777C12B); ++ regmap_write(pextp, 0x506C, 0x005F9CFF); ++ regmap_write(pextp, 0x5070, 0x9D9DFAFA); ++ regmap_write(pextp, 0x5074, 0x27273F3F); ++ regmap_write(pextp, 0x5078, 0xA7883C68); ++ regmap_write(pextp, 0x507C, 0x11661166); ++ regmap_write(pextp, 0x5080, 0x0E000AAF); ++ regmap_write(pextp, 0x5084, 0x08080D0D); ++ regmap_write(pextp, 0x5088, 0x02030909); ++ regmap_write(pextp, 0x50E4, 0x0C0C0000); ++ regmap_write(pextp, 0x50E8, 0x04040000); ++ regmap_write(pextp, 0x50EC, 0x0F0F0C06); ++ regmap_write(pextp, 0x50A8, 0x506E8C8C); ++ regmap_write(pextp, 0x6004, 0x18190000); ++ regmap_write(pextp, 0x00F8, 0x01423342); ++ /* Force SGDT_OUT off and select PCS */ ++ regmap_write(pextp, 0x00F4, 0x80201F20); ++ /* Force GLB_CKDET_OUT */ ++ regmap_write(pextp, 0x0030, 0x00050C00); ++ /* Force AEQ on */ ++ regmap_write(pextp, 0x0070, 0x02002800); ++ ndelay(1020); ++ /* Setup DA default value */ ++ regmap_write(pextp, 0x30B0, 0x00000020); ++ regmap_write(pextp, 0x3028, 0x00008A01); ++ regmap_write(pextp, 0x302C, 0x0000A884); ++ regmap_write(pextp, 0x3024, 0x00083002); ++ regmap_write(pextp, 0x3010, 0x00022220); ++ regmap_write(pextp, 0x5064, 0x0F020A01); ++ regmap_write(pextp, 0x50B4, 0x06100600); ++ regmap_write(pextp, 0x3048, 0x40704000); ++ regmap_write(pextp, 0x3050, 0xA8000000); ++ regmap_write(pextp, 0x3054, 0x000000AA); ++ regmap_write(pextp, 0x306C, 0x00000F00); ++ regmap_write(pextp, 0xA060, 0x00040000); ++ regmap_write(pextp, 0x90D0, 0x00000001); ++ /* Release reset */ ++ regmap_write(pextp, 0x0070, 0x0200E800); ++ udelay(150); ++ /* Switch to P0 */ ++ regmap_write(pextp, 0x0070, 0x0200C111); ++ ndelay(1020); ++ regmap_write(pextp, 0x0070, 0x0200C101); ++ udelay(15); ++ /* Switch to Gen3 */ ++ regmap_write(pextp, 0x0070, 0x0202C111); ++ ndelay(1020); ++ regmap_write(pextp, 0x0070, 0x0202C101); ++ udelay(100); ++ regmap_write(pextp, 0x30B0, 0x00000030); ++ regmap_write(pextp, 0x00F4, 0x80201F00); ++ regmap_write(pextp, 0x3040, 0x30000000); ++ udelay(400); ++} ++ ++static void mtk_usxgmii_setup_phya_5gbaser(struct mtk_usxgmii_pcs *mpcs) ++{ ++ struct regmap *pextp; ++ ++ if (!mpcs->eth) ++ return; ++ ++ pextp = mpcs->eth->regmap_pextp[mpcs->id]; ++ if (!pextp) ++ return; ++ ++ /* Setup operation mode */ ++ regmap_write(pextp, 0x9024, 0x00D9071C); ++ regmap_write(pextp, 0x2020, 0xAAA5A5AA); ++ regmap_write(pextp, 0x2030, 0x0C020707); ++ regmap_write(pextp, 0x2034, 0x0E050F0F); ++ regmap_write(pextp, 0x2040, 0x00140032); ++ regmap_write(pextp, 0x50F0, 0x00C018AA); ++ regmap_write(pextp, 0x50E0, 0x3777812B); ++ regmap_write(pextp, 0x506C, 0x005C9CFF); ++ regmap_write(pextp, 0x5070, 0x9DFAFAFA); ++ regmap_write(pextp, 0x5074, 0x273F3F3F); ++ regmap_write(pextp, 0x5078, 0xA8883868); ++ regmap_write(pextp, 0x507C, 0x14661466); ++ regmap_write(pextp, 0x5080, 0x0E001ABF); ++ regmap_write(pextp, 0x5084, 0x080B0D0D); ++ regmap_write(pextp, 0x5088, 0x02050909); ++ regmap_write(pextp, 0x50E4, 0x0C000000); ++ regmap_write(pextp, 0x50E8, 0x04000000); ++ regmap_write(pextp, 0x50EC, 0x0F0F0C06); ++ regmap_write(pextp, 0x50A8, 0x50808C8C); ++ regmap_write(pextp, 0x6004, 0x18000000); ++ regmap_write(pextp, 0x00F8, 0x00A132A1); ++ /* Force SGDT_OUT off and select PCS */ ++ regmap_write(pextp, 0x00F4, 0x80201F20); ++ /* Force GLB_CKDET_OUT */ ++ regmap_write(pextp, 0x0030, 0x00050C00); ++ /* Force AEQ on */ ++ regmap_write(pextp, 0x0070, 0x02002800); ++ ndelay(1020); ++ /* Setup DA default value */ ++ regmap_write(pextp, 0x30B0, 0x00000020); ++ regmap_write(pextp, 0x3028, 0x00008A01); ++ regmap_write(pextp, 0x302C, 0x0000A884); ++ regmap_write(pextp, 0x3024, 0x00083002); ++ regmap_write(pextp, 0x3010, 0x00022220); ++ regmap_write(pextp, 0x5064, 0x0F020A01); ++ regmap_write(pextp, 0x50B4, 0x06100600); ++ regmap_write(pextp, 0x3048, 0x40704000); ++ regmap_write(pextp, 0x3050, 0xA8000000); ++ regmap_write(pextp, 0x3054, 0x000000AA); ++ regmap_write(pextp, 0x306C, 0x00000F00); ++ regmap_write(pextp, 0xA060, 0x00040000); ++ regmap_write(pextp, 0x90D0, 0x00000003); ++ /* Release reset */ ++ regmap_write(pextp, 0x0070, 0x0200E800); ++ udelay(150); ++ /* Switch to P0 */ ++ regmap_write(pextp, 0x0070, 0x0200C111); ++ ndelay(1020); ++ regmap_write(pextp, 0x0070, 0x0200C101); ++ udelay(15); ++ /* Switch to Gen3 */ ++ regmap_write(pextp, 0x0070, 0x0202C111); ++ ndelay(1020); ++ regmap_write(pextp, 0x0070, 0x0202C101); ++ udelay(100); ++ regmap_write(pextp, 0x30B0, 0x00000030); ++ regmap_write(pextp, 0x00F4, 0x80201F00); ++ regmap_write(pextp, 0x3040, 0x30000000); ++ udelay(400); ++} ++ ++static void mtk_usxgmii_setup_phya_10gbaser(struct mtk_usxgmii_pcs *mpcs) ++{ ++ struct regmap *pextp; ++ ++ if (!mpcs->eth) ++ return; ++ ++ pextp = mpcs->eth->regmap_pextp[mpcs->id]; ++ if (!pextp) ++ return; ++ ++ /* Setup operation mode */ ++ regmap_write(pextp, 0x9024, 0x00C9071C); ++ regmap_write(pextp, 0x2020, 0xAA8585AA); ++ regmap_write(pextp, 0x2030, 0x0C020707); ++ regmap_write(pextp, 0x2034, 0x0E050F0F); ++ regmap_write(pextp, 0x2040, 0x00140032); ++ regmap_write(pextp, 0x50F0, 0x00C014AA); ++ regmap_write(pextp, 0x50E0, 0x3777C12B); ++ regmap_write(pextp, 0x506C, 0x005F9CFF); ++ regmap_write(pextp, 0x5070, 0x9D9DFAFA); ++ regmap_write(pextp, 0x5074, 0x27273F3F); ++ regmap_write(pextp, 0x5078, 0xA7883C68); ++ regmap_write(pextp, 0x507C, 0x11661166); ++ regmap_write(pextp, 0x5080, 0x0E000AAF); ++ regmap_write(pextp, 0x5084, 0x08080D0D); ++ regmap_write(pextp, 0x5088, 0x02030909); ++ regmap_write(pextp, 0x50E4, 0x0C0C0000); ++ regmap_write(pextp, 0x50E8, 0x04040000); ++ regmap_write(pextp, 0x50EC, 0x0F0F0C06); ++ regmap_write(pextp, 0x50A8, 0x506E8C8C); ++ regmap_write(pextp, 0x6004, 0x18190000); ++ regmap_write(pextp, 0x00F8, 0x01423342); ++ /* Force SGDT_OUT off and select PCS */ ++ regmap_write(pextp, 0x00F4, 0x80201F20); ++ /* Force GLB_CKDET_OUT */ ++ regmap_write(pextp, 0x0030, 0x00050C00); ++ /* Force AEQ on */ ++ regmap_write(pextp, 0x0070, 0x02002800); ++ ndelay(1020); ++ /* Setup DA default value */ ++ regmap_write(pextp, 0x30B0, 0x00000020); ++ regmap_write(pextp, 0x3028, 0x00008A01); ++ regmap_write(pextp, 0x302C, 0x0000A884); ++ regmap_write(pextp, 0x3024, 0x00083002); ++ regmap_write(pextp, 0x3010, 0x00022220); ++ regmap_write(pextp, 0x5064, 0x0F020A01); ++ regmap_write(pextp, 0x50B4, 0x06100600); ++ regmap_write(pextp, 0x3048, 0x47684100); ++ regmap_write(pextp, 0x3050, 0x00000000); ++ regmap_write(pextp, 0x3054, 0x00000000); ++ regmap_write(pextp, 0x306C, 0x00000F00); ++ if (mpcs->id == 0) ++ regmap_write(pextp, 0xA008, 0x0007B400); ++ ++ regmap_write(pextp, 0xA060, 0x00040000); ++ regmap_write(pextp, 0x90D0, 0x00000001); ++ /* Release reset */ ++ regmap_write(pextp, 0x0070, 0x0200E800); ++ udelay(150); ++ /* Switch to P0 */ ++ regmap_write(pextp, 0x0070, 0x0200C111); ++ ndelay(1020); ++ regmap_write(pextp, 0x0070, 0x0200C101); ++ udelay(15); ++ /* Switch to Gen3 */ ++ regmap_write(pextp, 0x0070, 0x0202C111); ++ ndelay(1020); ++ regmap_write(pextp, 0x0070, 0x0202C101); ++ udelay(100); ++ regmap_write(pextp, 0x30B0, 0x00000030); ++ regmap_write(pextp, 0x00F4, 0x80201F00); ++ regmap_write(pextp, 0x3040, 0x30000000); ++ udelay(400); ++} ++ ++void mtk_sgmii_setup_phya_gen1(struct mtk_eth *eth, int mac_id) ++{ ++ u32 id = mtk_mac2xgmii_id(eth, mac_id); ++ struct regmap *pextp; ++ ++ if (id >= eth->soc->num_devs) ++ return; ++ ++ pextp = eth->regmap_pextp[id]; ++ if (!pextp) ++ return; ++ ++ /* Setup operation mode */ ++ regmap_write(pextp, 0x9024, 0x00D9071C); ++ regmap_write(pextp, 0x2020, 0xAA8585AA); ++ regmap_write(pextp, 0x2030, 0x0C020207); ++ regmap_write(pextp, 0x2034, 0x0E05050F); ++ regmap_write(pextp, 0x2040, 0x00200032); ++ regmap_write(pextp, 0x50F0, 0x00C014BA); ++ regmap_write(pextp, 0x50E0, 0x3777C12B); ++ regmap_write(pextp, 0x506C, 0x005F9CFF); ++ regmap_write(pextp, 0x5070, 0x9D9DFAFA); ++ regmap_write(pextp, 0x5074, 0x27273F3F); ++ regmap_write(pextp, 0x5078, 0xA7883C68); ++ regmap_write(pextp, 0x507C, 0x11661166); ++ regmap_write(pextp, 0x5080, 0x0E000EAF); ++ regmap_write(pextp, 0x5084, 0x08080E0D); ++ regmap_write(pextp, 0x5088, 0x02030B09); ++ regmap_write(pextp, 0x50E4, 0x0C0C0000); ++ regmap_write(pextp, 0x50E8, 0x04040000); ++ regmap_write(pextp, 0x50EC, 0x0F0F0606); ++ regmap_write(pextp, 0x50A8, 0x506E8C8C); ++ regmap_write(pextp, 0x6004, 0x18190000); ++ regmap_write(pextp, 0x00F8, 0x00FA32FA); ++ /* Force SGDT_OUT off and select PCS */ ++ regmap_write(pextp, 0x00F4, 0x80201F21); ++ /* Force GLB_CKDET_OUT */ ++ regmap_write(pextp, 0x0030, 0x00050C00); ++ /* Force AEQ on */ ++ regmap_write(pextp, 0x0070, 0x02002800); ++ ndelay(1020); ++ /* Setup DA default value */ ++ regmap_write(pextp, 0x30B0, 0x00000020); ++ regmap_write(pextp, 0x3028, 0x00008A01); ++ regmap_write(pextp, 0x302C, 0x0000A884); ++ regmap_write(pextp, 0x3024, 0x00083002); ++ regmap_write(pextp, 0x3010, 0x00011110); ++ regmap_write(pextp, 0x3048, 0x40704000); ++ regmap_write(pextp, 0x3064, 0x0000C000); ++ regmap_write(pextp, 0x3050, 0xA8000000); ++ regmap_write(pextp, 0x3054, 0x000000AA); ++ regmap_write(pextp, 0x306C, 0x20200F00); ++ regmap_write(pextp, 0xA060, 0x00050000); ++ regmap_write(pextp, 0x90D0, 0x00000007); ++ /* Release reset */ ++ regmap_write(pextp, 0x0070, 0x0200E800); ++ udelay(150); ++ /* Switch to P0 */ ++ regmap_write(pextp, 0x0070, 0x0200C111); ++ ndelay(1020); ++ regmap_write(pextp, 0x0070, 0x0200C101); ++ udelay(15); ++ /* Switch to Gen2 */ ++ regmap_write(pextp, 0x0070, 0x0201C111); ++ ndelay(1020); ++ regmap_write(pextp, 0x0070, 0x0201C101); ++ udelay(100); ++ regmap_write(pextp, 0x30B0, 0x00000030); ++ regmap_write(pextp, 0x00F4, 0x80201F01); ++ regmap_write(pextp, 0x3040, 0x30000000); ++ udelay(400); ++} ++ ++void mtk_sgmii_setup_phya_gen2(struct mtk_eth *eth, int mac_id) ++{ ++ u32 id = mtk_mac2xgmii_id(eth, mac_id); ++ struct regmap *pextp; ++ ++ if (id >= eth->soc->num_devs) ++ return; ++ ++ pextp = eth->regmap_pextp[id]; ++ if (!pextp) ++ return; ++ ++ /* Setup operation mode */ ++ regmap_write(pextp, 0x9024, 0x00D9071C); ++ regmap_write(pextp, 0x2020, 0xAA8585AA); ++ regmap_write(pextp, 0x2030, 0x0C020707); ++ regmap_write(pextp, 0x2034, 0x0E050F0F); ++ regmap_write(pextp, 0x2040, 0x00140032); ++ regmap_write(pextp, 0x50F0, 0x00C014AA); ++ regmap_write(pextp, 0x50E0, 0x3777C12B); ++ regmap_write(pextp, 0x506C, 0x005F9CFF); ++ regmap_write(pextp, 0x5070, 0x9D9DFAFA); ++ regmap_write(pextp, 0x5074, 0x27273F3F); ++ regmap_write(pextp, 0x5078, 0xA7883C68); ++ regmap_write(pextp, 0x507C, 0x11661166); ++ regmap_write(pextp, 0x5080, 0x0E000AAF); ++ regmap_write(pextp, 0x5084, 0x08080D0D); ++ regmap_write(pextp, 0x5088, 0x02030909); ++ regmap_write(pextp, 0x50E4, 0x0C0C0000); ++ regmap_write(pextp, 0x50E8, 0x04040000); ++ regmap_write(pextp, 0x50EC, 0x0F0F0C06); ++ regmap_write(pextp, 0x50A8, 0x506E8C8C); ++ regmap_write(pextp, 0x6004, 0x18190000); ++ regmap_write(pextp, 0x00F8, 0x009C329C); ++ /* Force SGDT_OUT off and select PCS */ ++ regmap_write(pextp, 0x00F4, 0x80201F21); ++ /* Force GLB_CKDET_OUT */ ++ regmap_write(pextp, 0x0030, 0x00050C00); ++ /* Force AEQ on */ ++ regmap_write(pextp, 0x0070, 0x02002800); ++ ndelay(1020); ++ /* Setup DA default value */ ++ regmap_write(pextp, 0x30B0, 0x00000020); ++ regmap_write(pextp, 0x3028, 0x00008A01); ++ regmap_write(pextp, 0x302C, 0x0000A884); ++ regmap_write(pextp, 0x3024, 0x00083002); ++ regmap_write(pextp, 0x3010, 0x00011110); ++ regmap_write(pextp, 0x3048, 0x40704000); ++ regmap_write(pextp, 0x3050, 0xA8000000); ++ regmap_write(pextp, 0x3054, 0x000000AA); ++ regmap_write(pextp, 0x306C, 0x22000F00); ++ regmap_write(pextp, 0xA060, 0x00050000); ++ regmap_write(pextp, 0x90D0, 0x00000005); ++ /* Release reset */ ++ regmap_write(pextp, 0x0070, 0x0200E800); ++ udelay(150); ++ /* Switch to P0 */ ++ regmap_write(pextp, 0x0070, 0x0200C111); ++ ndelay(1020); ++ regmap_write(pextp, 0x0070, 0x0200C101); ++ udelay(15); ++ /* Switch to Gen2 */ ++ regmap_write(pextp, 0x0070, 0x0201C111); ++ ndelay(1020); ++ regmap_write(pextp, 0x0070, 0x0201C101); ++ udelay(100); ++ regmap_write(pextp, 0x30B0, 0x00000030); ++ regmap_write(pextp, 0x00F4, 0x80201F01); ++ regmap_write(pextp, 0x3040, 0x30000000); ++ udelay(400); ++} ++ ++static void mtk_usxgmii_reset(struct mtk_eth *eth, int id) ++{ ++ u32 val = 0; ++ ++ if (id >= eth->soc->num_devs || !eth->toprgu) ++ return; ++ ++ switch (id) { ++ case 0: ++ /* Enable software reset */ ++ regmap_read(eth->toprgu, TOPRGU_SWSYSRST_EN, &val); ++ val |= SWSYSRST_XFI_PEXPT0_GRST | ++ SWSYSRST_XFI0_GRST; ++ regmap_write(eth->toprgu, TOPRGU_SWSYSRST_EN, val); ++ ++ /* Assert USXGMII reset */ ++ regmap_read(eth->toprgu, TOPRGU_SWSYSRST, &val); ++ val |= FIELD_PREP(SWSYSRST_UNLOCK_KEY, 0x88) | ++ SWSYSRST_XFI_PEXPT0_GRST | ++ SWSYSRST_XFI0_GRST; ++ regmap_write(eth->toprgu, TOPRGU_SWSYSRST, val); ++ ++ udelay(100); ++ ++ /* De-assert USXGMII reset */ ++ regmap_read(eth->toprgu, TOPRGU_SWSYSRST, &val); ++ val |= FIELD_PREP(SWSYSRST_UNLOCK_KEY, 0x88); ++ val &= ~(SWSYSRST_XFI_PEXPT0_GRST | ++ SWSYSRST_XFI0_GRST); ++ regmap_write(eth->toprgu, TOPRGU_SWSYSRST, val); ++ ++ /* Disable software reset */ ++ regmap_read(eth->toprgu, TOPRGU_SWSYSRST_EN, &val); ++ val &= ~(SWSYSRST_XFI_PEXPT0_GRST | ++ SWSYSRST_XFI0_GRST); ++ regmap_write(eth->toprgu, TOPRGU_SWSYSRST_EN, val); ++ break; ++ case 1: ++ /* Enable software reset */ ++ regmap_read(eth->toprgu, TOPRGU_SWSYSRST_EN, &val); ++ val |= SWSYSRST_XFI_PEXPT1_GRST | ++ SWSYSRST_XFI1_GRST; ++ regmap_write(eth->toprgu, TOPRGU_SWSYSRST_EN, val); ++ ++ /* Assert USXGMII reset */ ++ regmap_read(eth->toprgu, TOPRGU_SWSYSRST, &val); ++ val |= FIELD_PREP(SWSYSRST_UNLOCK_KEY, 0x88) | ++ SWSYSRST_XFI_PEXPT1_GRST | ++ SWSYSRST_XFI1_GRST; ++ regmap_write(eth->toprgu, TOPRGU_SWSYSRST, val); ++ ++ udelay(100); ++ ++ /* De-assert USXGMII reset */ ++ regmap_read(eth->toprgu, TOPRGU_SWSYSRST, &val); ++ val |= FIELD_PREP(SWSYSRST_UNLOCK_KEY, 0x88); ++ val &= ~(SWSYSRST_XFI_PEXPT1_GRST | ++ SWSYSRST_XFI1_GRST); ++ regmap_write(eth->toprgu, TOPRGU_SWSYSRST, val); ++ ++ /* Disable software reset */ ++ regmap_read(eth->toprgu, TOPRGU_SWSYSRST_EN, &val); ++ val &= ~(SWSYSRST_XFI_PEXPT1_GRST | ++ SWSYSRST_XFI1_GRST); ++ regmap_write(eth->toprgu, TOPRGU_SWSYSRST_EN, val); ++ break; ++ } ++ ++ mdelay(10); ++} ++ ++void mtk_sgmii_reset(struct mtk_eth *eth, int mac_id) ++{ ++ u32 xgmii_id = mtk_mac2xgmii_id(eth, mac_id); ++ ++ mtk_usxgmii_reset(eth, xgmii_id); ++} ++ ++ ++static int mtk_usxgmii_pcs_config(struct phylink_pcs *pcs, unsigned int mode, ++ phy_interface_t interface, ++ const unsigned long *advertising, ++ bool permit_pause_to_mac) ++{ ++ struct mtk_usxgmii_pcs *mpcs = pcs_to_mtk_usxgmii_pcs(pcs); ++ struct mtk_eth *eth = mpcs->eth; ++ unsigned int an_ctrl = 0, link_timer = 0, xfi_mode = 0, adapt_mode = 0; ++ bool mode_changed = false; ++ ++ if (interface == PHY_INTERFACE_MODE_USXGMII) { ++ an_ctrl = FIELD_PREP(USXGMII_AN_SYNC_CNT, 0x1FF) | ++ USXGMII_AN_ENABLE; ++ link_timer = FIELD_PREP(USXGMII_LINK_TIMER_IDLE_DETECT, 0x7B) | ++ FIELD_PREP(USXGMII_LINK_TIMER_COMP_ACK_DETECT, 0x7B) | ++ FIELD_PREP(USXGMII_LINK_TIMER_AN_RESTART, 0x7B); ++ xfi_mode = FIELD_PREP(USXGMII_XFI_RX_MODE, USXGMII_XFI_RX_MODE_10G) | ++ FIELD_PREP(USXGMII_XFI_TX_MODE, USXGMII_XFI_TX_MODE_10G); ++ } else if (interface == PHY_INTERFACE_MODE_10GKR) { ++ an_ctrl = FIELD_PREP(USXGMII_AN_SYNC_CNT, 0x1FF); ++ link_timer = FIELD_PREP(USXGMII_LINK_TIMER_IDLE_DETECT, 0x7B) | ++ FIELD_PREP(USXGMII_LINK_TIMER_COMP_ACK_DETECT, 0x7B) | ++ FIELD_PREP(USXGMII_LINK_TIMER_AN_RESTART, 0x7B); ++ xfi_mode = FIELD_PREP(USXGMII_XFI_RX_MODE, USXGMII_XFI_RX_MODE_10G) | ++ FIELD_PREP(USXGMII_XFI_TX_MODE, USXGMII_XFI_TX_MODE_10G); ++ adapt_mode = USXGMII_RATE_UPDATE_MODE; ++ } else if (interface == PHY_INTERFACE_MODE_5GBASER) { ++ an_ctrl = FIELD_PREP(USXGMII_AN_SYNC_CNT, 0xFF); ++ link_timer = FIELD_PREP(USXGMII_LINK_TIMER_IDLE_DETECT, 0x3D) | ++ FIELD_PREP(USXGMII_LINK_TIMER_COMP_ACK_DETECT, 0x3D) | ++ FIELD_PREP(USXGMII_LINK_TIMER_AN_RESTART, 0x3D); ++ xfi_mode = FIELD_PREP(USXGMII_XFI_RX_MODE, USXGMII_XFI_RX_MODE_5G) | ++ FIELD_PREP(USXGMII_XFI_TX_MODE, USXGMII_XFI_TX_MODE_5G); ++ adapt_mode = USXGMII_RATE_UPDATE_MODE; ++ } else ++ return -EINVAL; ++ ++ adapt_mode |= FIELD_PREP(USXGMII_RATE_ADAPT_MODE, USXGMII_RATE_ADAPT_MODE_X1); ++ ++ if (mpcs->interface != interface) { ++ mpcs->interface = interface; ++ mode_changed = true; ++ } ++ ++ mtk_xfi_pll_enable(eth); ++ mtk_usxgmii_reset(eth, mpcs->id); ++ ++ /* Setup USXGMII AN ctrl */ ++ regmap_update_bits(mpcs->regmap, RG_PCS_AN_CTRL0, ++ USXGMII_AN_SYNC_CNT | USXGMII_AN_ENABLE, ++ an_ctrl); ++ ++ regmap_update_bits(mpcs->regmap, RG_PCS_AN_CTRL2, ++ USXGMII_LINK_TIMER_IDLE_DETECT | ++ USXGMII_LINK_TIMER_COMP_ACK_DETECT | ++ USXGMII_LINK_TIMER_AN_RESTART, ++ link_timer); ++ ++ /* Gated MAC CK */ ++ regmap_update_bits(mpcs->regmap, RG_PHY_TOP_SPEED_CTRL1, ++ USXGMII_MAC_CK_GATED, USXGMII_MAC_CK_GATED); ++ ++ /* Enable interface force mode */ ++ regmap_update_bits(mpcs->regmap, RG_PHY_TOP_SPEED_CTRL1, ++ USXGMII_IF_FORCE_EN, USXGMII_IF_FORCE_EN); ++ ++ /* Setup USXGMII adapt mode */ ++ regmap_update_bits(mpcs->regmap, RG_PHY_TOP_SPEED_CTRL1, ++ USXGMII_RATE_UPDATE_MODE | USXGMII_RATE_ADAPT_MODE, ++ adapt_mode); ++ ++ /* Setup USXGMII speed */ ++ regmap_update_bits(mpcs->regmap, RG_PHY_TOP_SPEED_CTRL1, ++ USXGMII_XFI_RX_MODE | USXGMII_XFI_TX_MODE, ++ xfi_mode); ++ ++ udelay(1); ++ ++ /* Un-gated MAC CK */ ++ regmap_update_bits(mpcs->regmap, RG_PHY_TOP_SPEED_CTRL1, ++ USXGMII_MAC_CK_GATED, 0); ++ ++ udelay(1); ++ ++ /* Disable interface force mode for the AN mode */ ++ if (an_ctrl & USXGMII_AN_ENABLE) ++ regmap_update_bits(mpcs->regmap, RG_PHY_TOP_SPEED_CTRL1, ++ USXGMII_IF_FORCE_EN, 0); ++ ++ /* Setup USXGMIISYS with the determined property */ ++ if (interface == PHY_INTERFACE_MODE_USXGMII) ++ mtk_usxgmii_setup_phya_usxgmii(mpcs); ++ else if (interface == PHY_INTERFACE_MODE_10GKR) ++ mtk_usxgmii_setup_phya_10gbaser(mpcs); ++ else if (interface == PHY_INTERFACE_MODE_5GBASER) ++ mtk_usxgmii_setup_phya_5gbaser(mpcs); ++ ++ return mode_changed; ++} ++ ++static void mtk_usxgmii_pcs_get_state(struct phylink_pcs *pcs, ++ struct phylink_link_state *state) ++{ ++ struct mtk_usxgmii_pcs *mpcs = pcs_to_mtk_usxgmii_pcs(pcs); ++ struct mtk_eth *eth = mpcs->eth; ++ struct mtk_mac *mac = eth->mac[mtk_xgmii2mac_id(eth, mpcs->id)]; ++ u32 val = 0; ++ ++ regmap_read(mpcs->regmap, RG_PCS_AN_CTRL0, &val); ++ if (FIELD_GET(USXGMII_AN_ENABLE, val)) { ++ /* Refresh LPA by inverting LPA_LATCH */ ++ regmap_read(mpcs->regmap, RG_PCS_AN_STS0, &val); ++ regmap_update_bits(mpcs->regmap, RG_PCS_AN_STS0, ++ USXGMII_LPA_LATCH, ++ !(val & USXGMII_LPA_LATCH)); ++ ++ regmap_read(mpcs->regmap, RG_PCS_AN_STS0, &val); ++ ++ state->interface = mpcs->interface; ++ state->link = FIELD_GET(USXGMII_LPA_LINK, val); ++ state->duplex = FIELD_GET(USXGMII_LPA_DUPLEX, val); ++ ++ switch (FIELD_GET(USXGMII_LPA_SPEED_MASK, val)) { ++ case USXGMII_LPA_SPEED_10: ++ state->speed = SPEED_10; ++ break; ++ case USXGMII_LPA_SPEED_100: ++ state->speed = SPEED_100; ++ break; ++ case USXGMII_LPA_SPEED_1000: ++ state->speed = SPEED_1000; ++ break; ++ case USXGMII_LPA_SPEED_2500: ++ state->speed = SPEED_2500; ++ break; ++ case USXGMII_LPA_SPEED_5000: ++ state->speed = SPEED_5000; ++ break; ++ case USXGMII_LPA_SPEED_10000: ++ state->speed = SPEED_10000; ++ break; ++ } ++ } else { ++ val = mtk_r32(mac->hw, MTK_XGMAC_STS(mac->id)); ++ ++ if (mac->id == MTK_GMAC2_ID) ++ val = val >> 16; ++ ++ switch (FIELD_GET(MTK_USXGMII_PCS_MODE, val)) { ++ case 0: ++ state->speed = SPEED_10000; ++ break; ++ case 1: ++ state->speed = SPEED_5000; ++ break; ++ case 2: ++ state->speed = SPEED_2500; ++ break; ++ case 3: ++ state->speed = SPEED_1000; ++ break; ++ } ++ ++ state->interface = mpcs->interface; ++ state->link = FIELD_GET(MTK_USXGMII_PCS_LINK, val); ++ state->duplex = DUPLEX_FULL; ++ } ++ ++ if (state->link == 0) ++ mtk_usxgmii_pcs_config(pcs, MLO_AN_INBAND, ++ state->interface, NULL, false); ++} ++ ++static void mtk_usxgmii_pcs_restart_an(struct phylink_pcs *pcs) ++{ ++ struct mtk_usxgmii_pcs *mpcs = pcs_to_mtk_usxgmii_pcs(pcs); ++ unsigned int val = 0; ++ ++ if (!mpcs->regmap) ++ return; ++ ++ regmap_read(mpcs->regmap, RG_PCS_AN_CTRL0, &val); ++ val |= USXGMII_AN_RESTART; ++ regmap_write(mpcs->regmap, RG_PCS_AN_CTRL0, val); ++} ++ ++static void mtk_usxgmii_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode, ++ phy_interface_t interface, ++ int speed, int duplex) ++{ ++ /* Reconfiguring USXGMII to ensure the quality of the RX signal ++ * after the line side link up. ++ */ ++ mtk_usxgmii_pcs_config(pcs, mode, ++ interface, NULL, false); ++} ++ ++static const struct phylink_pcs_ops mtk_usxgmii_pcs_ops = { ++ .pcs_config = mtk_usxgmii_pcs_config, ++ .pcs_get_state = mtk_usxgmii_pcs_get_state, ++ .pcs_an_restart = mtk_usxgmii_pcs_restart_an, ++ .pcs_link_up = mtk_usxgmii_pcs_link_up, ++}; ++ ++int mtk_usxgmii_init(struct mtk_eth *eth) ++{ ++ struct device_node *r = eth->dev->of_node; ++ struct device *dev = eth->dev; ++ struct device_node *np; ++ int i, ret; ++ ++ eth->usxgmii_pcs = devm_kcalloc(dev, eth->soc->num_devs, sizeof(eth->usxgmii_pcs), GFP_KERNEL); ++ if (!eth->usxgmii_pcs) ++ return -ENOMEM; ++ ++ for (i = 0; i < eth->soc->num_devs; i++) { ++ np = of_parse_phandle(r, "mediatek,usxgmiisys", i); ++ if (!np) ++ break; ++ ++ eth->usxgmii_pcs[i] = devm_kzalloc(dev, sizeof(*eth->usxgmii_pcs), GFP_KERNEL); ++ if (!eth->usxgmii_pcs[i]) ++ return -ENOMEM; ++ ++ eth->usxgmii_pcs[i]->id = i; ++ eth->usxgmii_pcs[i]->eth = eth; ++ eth->usxgmii_pcs[i]->regmap = syscon_node_to_regmap(np); ++ if (IS_ERR(eth->usxgmii_pcs[i]->regmap)) ++ return PTR_ERR(eth->usxgmii_pcs[i]->regmap); ++ ++ eth->usxgmii_pcs[i]->pcs.ops = &mtk_usxgmii_pcs_ops; ++ eth->usxgmii_pcs[i]->pcs.poll = true; ++ eth->usxgmii_pcs[i]->interface = PHY_INTERFACE_MODE_NA; ++ ++ of_node_put(np); ++ } ++ ++ ret = mtk_xfi_pextp_init(eth); ++ if (ret) ++ return ret; ++ ++ ret = mtk_xfi_pll_init(eth); ++ if (ret) ++ return ret; ++ ++ return mtk_toprgu_init(eth); ++} ++ ++struct phylink_pcs *mtk_usxgmii_select_pcs(struct mtk_eth *eth, int mac_id) ++{ ++ u32 xgmii_id = mtk_mac2xgmii_id(eth, mac_id); ++ ++ if (!eth->usxgmii_pcs[xgmii_id]->regmap) ++ return NULL; ++ ++ return ð->usxgmii_pcs[xgmii_id]->pcs; ++} From e2a09540eb758db6ae26deeed3ebc34336251d4f Mon Sep 17 00:00:00 2001 From: Ashley Lee Date: Fri, 5 Jan 2024 18:30:25 +0800 Subject: [PATCH 4/4] mediatek: add support for Ruijie RG-X60 Pro (#11745) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Informations: - SoC : MediaTek MT7986A 2.0GHz - RAM : DDR3 512MiB (W634GU6QB) - Flash : SPI-NAND 128 MiB (W25N01GVZEIG) - WLAN : MediaTek MT7986A integration dual-band WiFi 6 - 2.4 GHz : b/g/n/ax, MIMO 4x4 - 5 GHz : a/n/ac/ax, MIMO 4x4 - Ethernet : 10/100/1000 Mbps x4 (MediaTek MT7531AE) 2500Mbps x 1 （Realtek RTL8221B-VB-CG） - UART : through-hole on PCB - [J500] GND, TX, RX, 3.3V (115200n1) - Buttons : Mesh, Reset - LEDs : 1x Power (Blue) 1x Turbo (Purple) - Power : 12 VDC, 3 A About MAC Address: +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | WAN | 10:82:3D:XX:XX:9E | label | | LAN | 10:82:3D:XX:XX:9F | label+1 | | WLAN 2g | 10:82:3D:XX:XX:A0 | label+2 | | WLAN 5g | 10:82:3D:XX:XX:A1 | label+3 | +---------+-------------------+-----------+ Signed-off-by: Ashley Lee --- .../dts/mt7986a-ruijie-rg-x60-pro.dts | 264 ++++++++++++++++++ .../filogic/base-files/etc/board.d/02_network | 8 +- .../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 5 + target/linux/mediatek/image/filogic.mk | 10 + 4 files changed, 286 insertions(+), 1 deletion(-) create mode 100644 target/linux/mediatek/dts/mt7986a-ruijie-rg-x60-pro.dts diff --git a/target/linux/mediatek/dts/mt7986a-ruijie-rg-x60-pro.dts b/target/linux/mediatek/dts/mt7986a-ruijie-rg-x60-pro.dts new file mode 100644 index 00000000000000..c486d9d553deb3 --- /dev/null +++ b/target/linux/mediatek/dts/mt7986a-ruijie-rg-x60-pro.dts @@ -0,0 +1,264 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; +#include +#include +#include + +#include "mt7986a.dtsi" + +/ { + compatible = "ruijie,rg-x60-pro", "mediatek,mt7986a"; + model = "Ruijie RG-X60 Pro"; + + aliases { + serial0 = &uart0; + led-boot = &led_system; + led-failsafe = &led_alarm; + led-running = &led_system; + led-upgrade = &led_alarm; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x11002000"; + }; + + memory { + reg = <0 0x40000000 0 0x20000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-0 { + label = "reset"; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + button-1 { + label = "mesh"; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds-gpio { + compatible = "gpio-leds"; + + led_system: led-0 { + label = "white:status"; + gpios = <&pio 22 GPIO_ACTIVE_LOW>; + }; + + led_alarm: led-1 { + label = "purple:status"; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy7>; + phy-mode = "2500base-x"; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&mdio { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; + }; + + phy7: phy@7 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <7>; + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>; + realtek,aldps-enable; + }; +}; + +&pio { + spi_flash_pins: spi-flash-pins-33-to-38 { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <8>; + mediatek,pull-down-adv = <0>; /* bias-disable */ + }; + }; + + wf_2g_5g_pins: wf_2g_5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + spi-max-frequency = <20000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "BL2"; + reg = <0x000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; + read-only; + }; + + factory: partition@180000 { + label = "Factory"; + reg = <0x180000 0x200000>; + read-only; + }; + + partition@380000 { + label = "FIP"; + reg = <0x380000 0x200000>; + read-only; + }; + + partition@580000 { + label = "product_info"; + reg = <0x580000 0x80000>; + read-only; + }; + + partition@600000 { + label = "kdump"; + reg = <0x600000 0x80000>; + read-only; + }; + + partition@680000 { + label = "ubi"; + reg = <0x680000 0x3f00000>; + }; + }; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&wmac { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wf_2g_5g_pins>; + + mediatek,mtd-eeprom = <&factory 0x0>; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index e17600cad02721..8ff7059ee76642 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -10,7 +10,8 @@ mediatek_setup_interfaces() case $board in asus,tuf-ax4200|\ jdcloud,re-cs-05|\ - netcore,n60) + netcore,n60|\ + ruijie,rg-x60-pro) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1 ;; bananapi,bpi-r3) @@ -98,6 +99,11 @@ mediatek_setup_macs() wan_mac=$(macaddr_add "$lan_mac" 1) label_mac=$wan_mac ;; + ruijie,rg-x60-pro) + label_mac=$(mtd_get_mac_ascii product_info ethaddr) + wan_mac=$label_mac + lan_mac=$(macaddr_add "$label_mac" 1) + ;; xiaomi,mi-router-wr30u|\ xiaomi,mi-router-ax3000t|\ xiaomi,redmi-router-ax6000) diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 1d3d162d12f303..42e877fac46d56 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -50,6 +50,11 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress ;; + ruijie,rg-x60-pro) + addr=$(mtd_get_mac_ascii product_info ethaddr) + [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress + ;; tplink,tl-xdr4288|\ tplink,tl-xdr6086|\ tplink,tl-xdr6088) diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 0b082ccf6737b7..0e3868741b12ec 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -326,6 +326,16 @@ define Device/qihoo_360t7 endef TARGET_DEVICES += qihoo_360t7 +define Device/ruijie_rg-x60-pro + DEVICE_VENDOR := Ruijie + DEVICE_MODEL := RG-X60 Pro + DEVICE_DTS := mt7986a-ruijie-rg-x60-pro + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += ruijie_rg-x60-pro + define Device/tplink_tl-common DEVICE_VENDOR := TP-Link DEVICE_DTS_DIR := ../dts