From e2a09540eb758db6ae26deeed3ebc34336251d4f Mon Sep 17 00:00:00 2001 From: Ashley Lee Date: Fri, 5 Jan 2024 18:30:25 +0800 Subject: [PATCH] mediatek: add support for Ruijie RG-X60 Pro (#11745) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Informations: - SoC : MediaTek MT7986A 2.0GHz - RAM : DDR3 512MiB (W634GU6QB) - Flash : SPI-NAND 128 MiB (W25N01GVZEIG) - WLAN : MediaTek MT7986A integration dual-band WiFi 6 - 2.4 GHz : b/g/n/ax, MIMO 4x4 - 5 GHz : a/n/ac/ax, MIMO 4x4 - Ethernet : 10/100/1000 Mbps x4 (MediaTek MT7531AE) 2500Mbps x 1 （Realtek RTL8221B-VB-CG） - UART : through-hole on PCB - [J500] GND, TX, RX, 3.3V (115200n1) - Buttons : Mesh, Reset - LEDs : 1x Power (Blue) 1x Turbo (Purple) - Power : 12 VDC, 3 A About MAC Address: +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | WAN | 10:82:3D:XX:XX:9E | label | | LAN | 10:82:3D:XX:XX:9F | label+1 | | WLAN 2g | 10:82:3D:XX:XX:A0 | label+2 | | WLAN 5g | 10:82:3D:XX:XX:A1 | label+3 | +---------+-------------------+-----------+ Signed-off-by: Ashley Lee --- .../dts/mt7986a-ruijie-rg-x60-pro.dts | 264 ++++++++++++++++++ .../filogic/base-files/etc/board.d/02_network | 8 +- .../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 5 + target/linux/mediatek/image/filogic.mk | 10 + 4 files changed, 286 insertions(+), 1 deletion(-) create mode 100644 target/linux/mediatek/dts/mt7986a-ruijie-rg-x60-pro.dts diff --git a/target/linux/mediatek/dts/mt7986a-ruijie-rg-x60-pro.dts b/target/linux/mediatek/dts/mt7986a-ruijie-rg-x60-pro.dts new file mode 100644 index 00000000000000..c486d9d553deb3 --- /dev/null +++ b/target/linux/mediatek/dts/mt7986a-ruijie-rg-x60-pro.dts @@ -0,0 +1,264 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; +#include +#include +#include + +#include "mt7986a.dtsi" + +/ { + compatible = "ruijie,rg-x60-pro", "mediatek,mt7986a"; + model = "Ruijie RG-X60 Pro"; + + aliases { + serial0 = &uart0; + led-boot = &led_system; + led-failsafe = &led_alarm; + led-running = &led_system; + led-upgrade = &led_alarm; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x11002000"; + }; + + memory { + reg = <0 0x40000000 0 0x20000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-0 { + label = "reset"; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + button-1 { + label = "mesh"; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds-gpio { + compatible = "gpio-leds"; + + led_system: led-0 { + label = "white:status"; + gpios = <&pio 22 GPIO_ACTIVE_LOW>; + }; + + led_alarm: led-1 { + label = "purple:status"; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy7>; + phy-mode = "2500base-x"; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&mdio { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; + }; + + phy7: phy@7 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <7>; + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>; + realtek,aldps-enable; + }; +}; + +&pio { + spi_flash_pins: spi-flash-pins-33-to-38 { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <8>; + mediatek,pull-down-adv = <0>; /* bias-disable */ + }; + }; + + wf_2g_5g_pins: wf_2g_5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + spi-max-frequency = <20000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "BL2"; + reg = <0x000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; + read-only; + }; + + factory: partition@180000 { + label = "Factory"; + reg = <0x180000 0x200000>; + read-only; + }; + + partition@380000 { + label = "FIP"; + reg = <0x380000 0x200000>; + read-only; + }; + + partition@580000 { + label = "product_info"; + reg = <0x580000 0x80000>; + read-only; + }; + + partition@600000 { + label = "kdump"; + reg = <0x600000 0x80000>; + read-only; + }; + + partition@680000 { + label = "ubi"; + reg = <0x680000 0x3f00000>; + }; + }; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&wmac { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wf_2g_5g_pins>; + + mediatek,mtd-eeprom = <&factory 0x0>; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index e17600cad02721..8ff7059ee76642 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -10,7 +10,8 @@ mediatek_setup_interfaces() case $board in asus,tuf-ax4200|\ jdcloud,re-cs-05|\ - netcore,n60) + netcore,n60|\ + ruijie,rg-x60-pro) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1 ;; bananapi,bpi-r3) @@ -98,6 +99,11 @@ mediatek_setup_macs() wan_mac=$(macaddr_add "$lan_mac" 1) label_mac=$wan_mac ;; + ruijie,rg-x60-pro) + label_mac=$(mtd_get_mac_ascii product_info ethaddr) + wan_mac=$label_mac + lan_mac=$(macaddr_add "$label_mac" 1) + ;; xiaomi,mi-router-wr30u|\ xiaomi,mi-router-ax3000t|\ xiaomi,redmi-router-ax6000) diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 1d3d162d12f303..42e877fac46d56 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -50,6 +50,11 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress ;; + ruijie,rg-x60-pro) + addr=$(mtd_get_mac_ascii product_info ethaddr) + [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress + ;; tplink,tl-xdr4288|\ tplink,tl-xdr6086|\ tplink,tl-xdr6088) diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 0b082ccf6737b7..0e3868741b12ec 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -326,6 +326,16 @@ define Device/qihoo_360t7 endef TARGET_DEVICES += qihoo_360t7 +define Device/ruijie_rg-x60-pro + DEVICE_VENDOR := Ruijie + DEVICE_MODEL := RG-X60 Pro + DEVICE_DTS := mt7986a-ruijie-rg-x60-pro + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += ruijie_rg-x60-pro + define Device/tplink_tl-common DEVICE_VENDOR := TP-Link DEVICE_DTS_DIR := ../dts