Nodemcu_Amica_esp8266_WebserverAudio.ino

/*
 * ESP8266 + FastLED + IR Remote + MSGEQ7: https://github.com/jasoncoon/esp8266-fastled-webserver
 * Copyright (C) 2015 Jason Coon
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include "FastLED.h"
FASTLED_USING_NAMESPACE

extern "C" {
#include "user_interface.h"
}

#include <ESP8266WiFi.h>
#include <ESP8266WebServer.h>
#include <FS.h>
#include <EEPROM.h>
#include <IRremoteESP8266.h>
#include "GradientPalettes.h"

#define RECV_PIN 12
IRrecv irReceiver(RECV_PIN);

#include "Commands.h"


// MSGEQ7 SETUP and SMOOTHING (eventually replace by MSGEQ7 class)
const uint8_t AUDIO_LEFT_PIN = A0;
const uint8_t MSGEQ7_STROBE_PIN = 7, MSGEQ7_RESET_PIN = 8;
float lowPass_audio = 0.15;
const uint8_t filter_max = 1016;
uint8_t filter_min = 120;
const float EQ[7] = {0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5}; /* EQ[7] = {0, 0, 0, 0, 0, 0, 0}; */
const uint8_t sensitive_min = filter_min - (filter_min * .15);
const float FILTER_MIN[7] = {filter_min, filter_min, filter_min, filter_min, filter_min, filter_min, filter_min};
uint8_t new_left, new_right, prev_left, prev_right, prev_value, left_value, right_value;
uint8_t left_volume, right_volume, mono_volume;
uint8_t left[7], right[7], mono[7];
uint8_t mapped_left[7], mapped_right[7], full_mapped[14], mapped[7], full_flex[7];
float left_factor, right_factor, mono_factor, full_factor;
float half_MAPPED_AMPLITUDE, half_MAPPED_LEFT_AMP, half_MAPPED_RIGHT_AMP;
uint8_t prev_left_amp, prev_right_amp;

//NOISE SETUP
static uint16_t x, y, z, dist;
float scale = 20.00; //1 - ~4000 (shimmery, zoomed out)
//float SPEED = 1.00f;  //1-100 (fast)
uint8_t ioffset, joffset;

// HSV SETUP
int BRIGHTNESS = 255;
int saturation = 255;
uint8_t hue, ihue, encoderHue;
float fhue;
uint8_t spectrumWidth = 36;
float HUEcorrection = /*floor(255 / NUM_LEDS);*/ 1.7; // *ALMOST* hue range fits on strip length
float half_HUEcorrection = HUEcorrection * 2;
// unnecessary math, to be fixed
const uint8_t HUEZ[14] = {240, 200, 160, 120, 80, 40, 0, 0, 40, 80, 120, 160, 200, 240};

// OTHER
uint8_t ledindex, segment, INDEX, i, k, band;
float divFactor;

// EFFECT: radiate (stereo)
uint8_t zero_l, three_l, six_l, zero_r, three_r, six_r;


int MILLISECONDS = 0;



const bool apMode = false;

// AP mode password
const char WiFiAPPSK[] = "";

// Wi-Fi network to connect to (if not in AP mode)
const char* ssid = "Zombo";
const char* password = "***";

ESP8266WebServer server(80);

#define DATA_PIN      5     // for Huzzah: Pins w/o special function:  #4, #5, #12, #13, #14; // #16 does not work :(
#define LED_TYPE      WS2812B
#define COLOR_ORDER   GRB
#define NUM_LEDS      144
//#define CLK_PIN       4
int HALF_POS = (NUM_LEDS * 0.5) - 1;

#define MILLI_AMPS         8000     // IMPORTANT: set here the max milli-Amps of your power supply 5V 2A = 2000
#define FRAMES_PER_SECOND  300 // here you can control the speed. With the Access Point / Web Server the animations run a bit slower.

CRGB leds[NUM_LEDS];

uint8_t patternIndex = 0;

const uint8_t brightnessCount = 5;
uint8_t brightnessMap[brightnessCount] = { 16, 32, 64, 128, 255 };
int brightnessIndex = 0;
uint8_t brightness = brightnessMap[brightnessIndex];

#define ARRAY_SIZE(A) (sizeof(A) / sizeof((A)[0]))

// ten seconds per color palette makes a good demo
// 20-120 is better for deployment
#define SECONDS_PER_PALETTE 10

///////////////////////////////////////////////////////////////////////

// Forward declarations of an array of cpt-city gradient palettes, and
// a count of how many there are.  The actual color palette definitions
// are at the bottom of this file.
extern const TProgmemRGBGradientPalettePtr gGradientPalettes[];
extern const uint8_t gGradientPaletteCount;

// Current palette number from the 'playlist' of color palettes
uint8_t gCurrentPaletteNumber = 0;

CRGBPalette16 gCurrentPalette( CRGB::Black);
CRGBPalette16 gTargetPalette( gGradientPalettes[0] );

uint8_t currentPatternIndex = 0; // Index number of which pattern is current
bool autoplayEnabled = false;

uint8_t autoPlayDurationSeconds = 10;
unsigned int autoPlayTimeout = 0;

uint8_t gHue = 0; // rotating "base color" used by many of the patterns

CRGB solidColor = CRGB::Blue;

uint8_t power = 1;

void setup(void) {
  Serial.begin(115200);
  delay(100);
  Serial.setDebugOutput(true);

  FastLED.addLeds<LED_TYPE, DATA_PIN, COLOR_ORDER>(leds, NUM_LEDS);         // for WS2812 (Neopixel)
//  FastLED.addLeds<LED_TYPE,DATA_PIN,CLK_PIN,COLOR_ORDER>(leds, NUM_LEDS); // for APA102 (Dotstar)
  FastLED.setCorrection(TypicalLEDStrip);
  FastLED.setBrightness(brightness);
  FastLED.setMaxPowerInVoltsAndMilliamps(5, MILLI_AMPS);
   for (int i = 0; i < NUM_LEDS; i++) {
    fill_solid(leds, NUM_LEDS, CRGB::Black);
  }
  FastLED.show();

  EEPROM.begin(512);
  loadSettings();

  irReceiver.enableIRIn(); // Start the receiver
 
  Serial.println();
  Serial.print( F("Heap: ") ); Serial.println(system_get_free_heap_size());
  Serial.print( F("Boot Vers: ") ); Serial.println(system_get_boot_version());
  Serial.print( F("CPU: ") ); Serial.println(system_get_cpu_freq());
  Serial.print( F("SDK: ") ); Serial.println(system_get_sdk_version());
  Serial.print( F("Chip ID: ") ); Serial.println(system_get_chip_id());
  Serial.print( F("Flash ID: ") ); Serial.println(spi_flash_get_id());
  Serial.print( F("Flash Size: ") ); Serial.println(ESP.getFlashChipRealSize());
  Serial.print( F("Vcc: ") ); Serial.println(ESP.getVcc());
  Serial.println();

  SPIFFS.begin();
  {
    Dir dir = SPIFFS.openDir("/");
    while (dir.next()) {
      String fileName = dir.fileName();
      size_t fileSize = dir.fileSize();
      Serial.printf("FS File: %s, size: %s\n", fileName.c_str(), String(fileSize).c_str());
    }
    Serial.printf("\n");
  }

  if (apMode)
  {
    WiFi.mode(WIFI_AP);

    // Do a little work to get a unique-ish name. Append the
    // last two bytes of the MAC (HEX'd) to "Thing-":
    uint8_t mac[WL_MAC_ADDR_LENGTH];
    WiFi.softAPmacAddress(mac);
    String macID = String(mac[WL_MAC_ADDR_LENGTH - 2], HEX) +
                   String(mac[WL_MAC_ADDR_LENGTH - 1], HEX);
    macID.toUpperCase();
    String AP_NameString = "ESP8266 Thing " + macID;

    char AP_NameChar[AP_NameString.length() + 1];
    memset(AP_NameChar, 0, AP_NameString.length() + 1);

    for (int i = 0; i < AP_NameString.length(); i++)
      AP_NameChar[i] = AP_NameString.charAt(i);

    WiFi.softAP(AP_NameChar, WiFiAPPSK);

    Serial.printf("Connect to Wi-Fi access point: %s\n", AP_NameChar);
    Serial.println("and open http://192.168.4.1 in your browser");
  }
  else
  {
    Serial.printf("Connecting to %s\n", ssid);
    if (String(WiFi.SSID()) != String(ssid)) {
      WiFi.begin(ssid, password);
    }

    while (WiFi.status() != WL_CONNECTED) {
      delay(500);
      Serial.print(".");
    }

    Serial.print("Connected! Open http://");
    Serial.print(WiFi.localIP());
    Serial.println(" in your browser");
  }

  //  server.serveStatic("/", SPIFFS, "/index.htm"); // ,"max-age=86400"

  server.on("/all", HTTP_GET, []() {
    sendAll();
  });

  server.on("/power", HTTP_GET, []() {
    sendPower();
  });

  server.on("/power", HTTP_POST, []() {
    String value = server.arg("value");
    setPower(value.toInt());
    sendPower();
  });

  server.on("/solidColor", HTTP_GET, []() {
    sendSolidColor();
  });

  server.on("/solidColor", HTTP_POST, []() {
    String r = server.arg("r");
    String g = server.arg("g");
    String b = server.arg("b");
    setSolidColor(r.toInt(), g.toInt(), b.toInt());
    sendSolidColor();
  });

  server.on("/pattern", HTTP_GET, []() {
    sendPattern();
  });

  server.on("/pattern", HTTP_POST, []() {
    String value = server.arg("value");
    setPattern(value.toInt());
    sendPattern();
  });

  server.on("/patternUp", HTTP_POST, []() {
    adjustPattern(true);
    sendPattern();
  });

  server.on("/patternDown", HTTP_POST, []() {
    adjustPattern(false);
    sendPattern();
  });

  server.on("/brightness", HTTP_GET, []() {
    sendBrightness();
  });

  server.on("/brightness", HTTP_POST, []() {
    String value = server.arg("value");
    setBrightness(value.toInt());
    sendBrightness();
  });

  server.on("/brightnessUp", HTTP_POST, []() {
    adjustBrightness(true);
    sendBrightness();
  });

  server.on("/brightnessDown", HTTP_POST, []() {
    adjustBrightness(false);
    sendBrightness();
  });

  server.serveStatic("/index.htm", SPIFFS, "/index.htm");
  server.serveStatic("/fonts", SPIFFS, "/fonts", "max-age=86400");
  server.serveStatic("/js", SPIFFS, "/js");
  server.serveStatic("/css", SPIFFS, "/css", "max-age=86400");
  server.serveStatic("/images", SPIFFS, "/images", "max-age=86400");
  server.serveStatic("/", SPIFFS, "/index.htm");

  server.begin();

  Serial.println("HTTP server started");

  autoPlayTimeout = millis() + (autoPlayDurationSeconds * 1000);
}

typedef void (*Pattern)();
typedef Pattern PatternList[];
typedef struct {
  Pattern pattern;
  String name;
} PatternAndName;
typedef PatternAndName PatternAndNameList[];

// List of patterns to cycle through.  Each is defined as a separate function below.
PatternAndNameList patterns = {
  { colorwaves, "Color Waves" },
  { palettetest, "Palette Test" },
  { pride, "Pride" },
  { rainbow, "Rainbow" },
  { rainbowWithGlitter, "Rainbow With Glitter" },
  { confetti, "Confetti" },
  { sinelon, "Sinelon" },
  { juggle, "Juggle" },
  { bpm, "BPM" },
  { showSolidColor, "Solid Color" },
  { radiate, "Radiate" },
  { printaudio, "Print Audio" },
};

const uint8_t patternCount = ARRAY_SIZE(patterns);

void loop(void) {
  // Add entropy to random number generator; we use a lot of it.
  random16_add_entropy(random(65535));

  server.handleClient();

  handleIrInput();

  if (power == 0) {
    fill_solid(leds, NUM_LEDS, CRGB::Black);
    FastLED.show();
    FastLED.delay(15);
    return;
  }

  // EVERY_N_SECONDS(10) {
  //   Serial.print( F("Heap: ") ); Serial.println(system_get_free_heap_size());
  // }

  EVERY_N_MILLISECONDS( 20 ) {
    gHue++;  // slowly cycle the "base color" through the rainbow
  }

  // change to a new cpt-city gradient palette
  EVERY_N_SECONDS( SECONDS_PER_PALETTE ) {
    gCurrentPaletteNumber = addmod8( gCurrentPaletteNumber, 1, gGradientPaletteCount);
    gTargetPalette = gGradientPalettes[ gCurrentPaletteNumber ];
  }

  // slowly blend the current cpt-city gradient palette to the next
  EVERY_N_MILLISECONDS(40) {
    nblendPaletteTowardPalette( gCurrentPalette, gTargetPalette, 16);
  }

  if (autoplayEnabled && millis() > autoPlayTimeout) {
    adjustPattern(true);
    autoPlayTimeout = millis() + (autoPlayDurationSeconds * 1000);
  }

  // Call the current pattern function once, updating the 'leds' array
  patterns[currentPatternIndex].pattern();

  FastLED.show();

  // insert a delay to keep the framerate modest
  FastLED.delay(1000 / FRAMES_PER_SECOND);
}

void handleIrInput()
{
  InputCommand command = readCommand(defaultHoldDelay);

  if (command != InputCommand::None) {
    Serial.print("command: ");
    Serial.println((int) command);
  }

  switch (command) {
    case InputCommand::Up: {
        adjustPattern(true);
        break;
      }
    case InputCommand::Down: {
        adjustPattern(false);
        break;
      }
    case InputCommand::Power: {
        power = power == 0 ? 1 : 0;
        break;
      }
    case InputCommand::BrightnessUp: {
        adjustBrightness(true);
        break;
      }
    case InputCommand::BrightnessDown: {
        adjustBrightness(false);
        break;
      }
    case InputCommand::PlayMode: { // toggle pause/play
        autoplayEnabled = !autoplayEnabled;
        break;
      }

    // pattern buttons

    case InputCommand::Pattern1: {
        setPattern(0);
        break;
      }
    case InputCommand::Pattern2: {
        setPattern(1);
        break;
      }
    case InputCommand::Pattern3: {
        setPattern(2);
        break;
      }
    case InputCommand::Pattern4: {
        setPattern(3);
        break;
      }
    case InputCommand::Pattern5: {
        setPattern(4);
        break;
      }
    case InputCommand::Pattern6: {
        setPattern(5);
        break;
      }
    case InputCommand::Pattern7: {
        setPattern(6);
        break;
      }
    case InputCommand::Pattern8: {
        setPattern(7);
        break;
      }
    case InputCommand::Pattern9: {
        setPattern(8);
        break;
      }
    case InputCommand::Pattern10: {
        setPattern(9);
        break;
      }
    case InputCommand::Pattern11: {
        setPattern(10);
        break;
      }
    case InputCommand::Pattern12: {
        setPattern(11);
        break;
      }

    // custom color adjustment buttons

    case InputCommand::RedUp: {
        solidColor.red += 8;
        setSolidColor(solidColor);
        break;
      }
    case InputCommand::RedDown: {
        solidColor.red -= 8;
        setSolidColor(solidColor);
        break;
      }
    case InputCommand::GreenUp: {
        solidColor.green += 8;
        setSolidColor(solidColor);
        break;
      }
    case InputCommand::GreenDown: {
        solidColor.green -= 8;
        setSolidColor(solidColor);
        break;
      }
    case InputCommand::BlueUp: {
        solidColor.blue += 8;
        setSolidColor(solidColor);
        break;
      }
    case InputCommand::BlueDown: {
        solidColor.blue -= 8;
        setSolidColor(solidColor);
        break;
      }

    // color buttons

    case InputCommand::Red: {
        setSolidColor(CRGB::Red);
        break;
      }
    case InputCommand::RedOrange: {
        setSolidColor(CRGB::OrangeRed);
        break;
      }
    case InputCommand::Orange: {
        setSolidColor(CRGB::Orange);
        break;
      }
    case InputCommand::YellowOrange: {
        setSolidColor(CRGB::Goldenrod);
        break;
      }
    case InputCommand::Yellow: {
        setSolidColor(CRGB::Yellow);
        break;
      }

    case InputCommand::Green: {
        setSolidColor(CRGB::Green);
        break;
      }
    case InputCommand::Lime: {
        setSolidColor(CRGB::Lime);
        break;
      }
    case InputCommand::Aqua: {
        setSolidColor(CRGB::Aqua);
        break;
      }
    case InputCommand::Teal: {
        setSolidColor(CRGB::Teal);
        break;
      }
    case InputCommand::Navy: {
        setSolidColor(CRGB::Navy);
        break;
      }

    case InputCommand::Blue: {
        setSolidColor(CRGB::Blue);
        break;
      }
    case InputCommand::RoyalBlue: {
        setSolidColor(CRGB::RoyalBlue);
        break;
      }
    case InputCommand::Purple: {
        setSolidColor(CRGB::Purple);
        break;
      }
    case InputCommand::Indigo: {
        setSolidColor(CRGB::Indigo);
        break;
      }
    case InputCommand::Magenta: {
        setSolidColor(CRGB::Magenta);
        break;
      }

    case InputCommand::White: {
        setSolidColor(CRGB::White);
        break;
      }
    case InputCommand::Pink: {
        setSolidColor(CRGB::Pink);
        break;
      }
    case InputCommand::LightPink: {
        setSolidColor(CRGB::LightPink);
        break;
      }
    case InputCommand::BabyBlue: {
        setSolidColor(CRGB::CornflowerBlue);
        break;
      }
    case InputCommand::LightBlue: {
        setSolidColor(CRGB::LightBlue);
        break;
      }
  }
}

void loadSettings()
{
  brightness = EEPROM.read(0);

  currentPatternIndex = EEPROM.read(1);
  if (currentPatternIndex < 0)
    currentPatternIndex = 0;
  else if (currentPatternIndex >= patternCount)
    currentPatternIndex = patternCount - 1;

  byte r = EEPROM.read(2);
  byte g = EEPROM.read(3);
  byte b = EEPROM.read(4);

  if (r == 0 && g == 0 && b == 0)
  {
  }
  else
  {
    solidColor = CRGB(r, g, b);
  }
}

void sendAll()
{
  String json = "{";

  json += "\"power\":" + String(power) + ",";
  json += "\"brightness\":" + String(brightness) + ",";

  json += "\"currentPattern\":{";
  json += "\"index\":" + String(currentPatternIndex);
  json += ",\"name\":\"" + patterns[currentPatternIndex].name + "\"}";

  json += ",\"solidColor\":{";
  json += "\"r\":" + String(solidColor.r);
  json += ",\"g\":" + String(solidColor.g);
  json += ",\"b\":" + String(solidColor.b);
  json += "}";

  json += ",\"patterns\":[";
  for (uint8_t i = 0; i < patternCount; i++)
  {
    json += "\"" + patterns[i].name + "\"";
    if (i < patternCount - 1)
      json += ",";
  }
  json += "]";

  json += "}";

  server.send(200, "text/json", json);
  json = String();
}

void sendPower()
{
  String json = String(power);
  server.send(200, "text/json", json);
  json = String();
}

void sendPattern()
{
  String json = "{";
  json += "\"index\":" + String(currentPatternIndex);
  json += ",\"name\":\"" + patterns[currentPatternIndex].name + "\"";
  json += "}";
  server.send(200, "text/json", json);
  json = String();
}

void sendBrightness()
{
  String json = String(brightness);
  server.send(200, "text/json", json);
  json = String();
}

void sendSolidColor()
{
  String json = "{";
  json += "\"r\":" + String(solidColor.r);
  json += ",\"g\":" + String(solidColor.g);
  json += ",\"b\":" + String(solidColor.b);
  json += "}";
  server.send(200, "text/json", json);
  json = String();
}

void setPower(uint8_t value)
{
  power = value == 0 ? 0 : 1;
}

void setSolidColor(CRGB color)
{
  setSolidColor(color.r, color.g, color.b);
}

void setSolidColor(uint8_t r, uint8_t g, uint8_t b)
{
  solidColor = CRGB(r, g, b);

  EEPROM.write(2, r);
  EEPROM.write(3, g);
  EEPROM.write(4, b);

  setPattern(patternCount - 1);
}

// increase or decrease the current pattern number, and wrap around at the ends
void adjustPattern(bool up)
{
  if (up)
    currentPatternIndex++;
  else
    currentPatternIndex--;

  // wrap around at the ends
  if (currentPatternIndex < 0)
    currentPatternIndex = patternCount - 1;
  if (currentPatternIndex >= patternCount)
    currentPatternIndex = 0;

  EEPROM.write(1, currentPatternIndex);
  EEPROM.commit();
}

void setPattern(int value)
{
  // don't wrap around at the ends
  if (value < 0)
    value = 0;
  else if (value >= patternCount)
    value = patternCount - 1;

  currentPatternIndex = value;

  EEPROM.write(1, currentPatternIndex);
  EEPROM.commit();
}

// adjust the brightness, and wrap around at the ends
void adjustBrightness(bool up)
{
  if (up)
    brightnessIndex++;
  else
    brightnessIndex--;

  // wrap around at the ends
  if (brightnessIndex < 0)
    brightnessIndex = brightnessCount - 1;
  else if (brightnessIndex >= brightnessCount)
    brightnessIndex = 0;

  brightness = brightnessMap[brightnessIndex];

  FastLED.setBrightness(brightness);

  EEPROM.write(0, brightness);
  EEPROM.commit();
}

void setBrightness(int value)
{
  // don't wrap around at the ends
  if (value > 255)
    value = 255;
  else if (value < 0) value = 0;

  brightness = value;

  FastLED.setBrightness(brightness);

  EEPROM.write(0, brightness);
  EEPROM.commit();
}

void showSolidColor()
{
  fill_solid(leds, NUM_LEDS, solidColor);
}

void rainbow()
{
  // FastLED's built-in rainbow generator
  fill_rainbow( leds, NUM_LEDS, gHue, 10);
}

void rainbowWithGlitter()
{
  // built-in FastLED rainbow, plus some random sparkly glitter
  rainbow();
  addGlitter(80);
}

void addGlitter( fract8 chanceOfGlitter)
{
  if ( random8() < chanceOfGlitter) {
    leds[ random16(NUM_LEDS) ] += CRGB::White;
  }
}

void confetti()
{
  // random colored speckles that blink in and fade smoothly
  fadeToBlackBy( leds, NUM_LEDS, 10);
  int pos = random16(NUM_LEDS);
  leds[pos] += CHSV( gHue + random8(64), 200, 255);
}

void sinelon()
{
  // a colored dot sweeping back and forth, with fading trails
  fadeToBlackBy( leds, NUM_LEDS, 20);
  int pos = beatsin16(13, 0, NUM_LEDS - 1);
  leds[pos] += CHSV( gHue, 255, 192);
}

void bpm()
{
  // colored stripes pulsing at a defined Beats-Per-Minute (BPM)
  uint8_t BeatsPerMinute = 62;
  CRGBPalette16 palette = PartyColors_p;
  uint8_t beat = beatsin8( BeatsPerMinute, 64, 255);
  for ( int i = 0; i < NUM_LEDS; i++) { //9948
    leds[i] = ColorFromPalette(palette, gHue + (i * 2), beat - gHue + (i * 10));
  }
}

void juggle()
{
  // eight colored dots, weaving in and out of sync with each other
  fadeToBlackBy( leds, NUM_LEDS, 20);
  byte dothue = 0;
  for ( int i = 0; i < 8; i++)
  {
    leds[beatsin16(i + 7, 0, NUM_LEDS)] |= CHSV(dothue, 200, 255);
    dothue += 32;
  }
}

// Pride2015 by Mark Kriegsman: https://gist.github.com/kriegsman/964de772d64c502760e5
// This function draws rainbows with an ever-changing,
// widely-varying set of parameters.
void pride() {
  static uint16_t sPseudotime = 0;
  static uint16_t sLastMillis = 0;
  static uint16_t sHue16 = 0;

  uint8_t sat8 = beatsin88( 87, 220, 250);
  uint8_t brightdepth = beatsin88( 341, 96, 224);
  uint16_t brightnessthetainc16 = beatsin88( 203, (25 * 256), (40 * 256));
  uint8_t msmultiplier = beatsin88(147, 23, 60);

  uint16_t hue16 = sHue16;//gHue * 256;
  uint16_t hueinc16 = beatsin88(113, 1, 3000);

  uint16_t ms = millis();
  uint16_t deltams = ms - sLastMillis ;
  sLastMillis  = ms;
  sPseudotime += deltams * msmultiplier;
  sHue16 += deltams * beatsin88( 400, 5, 9);
  uint16_t brightnesstheta16 = sPseudotime;

  for ( uint16_t i = 0 ; i < NUM_LEDS; i++) {
    hue16 += hueinc16;
    uint8_t hue8 = hue16 / 256;

    brightnesstheta16  += brightnessthetainc16;
    uint16_t b16 = sin16( brightnesstheta16  ) + 32768;

    uint16_t bri16 = (uint32_t)((uint32_t)b16 * (uint32_t)b16) / 65536;
    uint8_t bri8 = (uint32_t)(((uint32_t)bri16) * brightdepth) / 65536;
    bri8 += (255 - brightdepth);

    CRGB newcolor = CHSV( hue8, sat8, bri8);

    nblend(leds[i], newcolor, 64);
  }
}

// ColorWavesWithPalettes by Mark Kriegsman: https://gist.github.com/kriegsman/8281905786e8b2632aeb
// This function draws color waves with an ever-changing,
// widely-varying set of parameters, using a color palette.
void colorwaves()
{
  static uint16_t sPseudotime = 0;
  static uint16_t sLastMillis = 0;
  static uint16_t sHue16 = 0;

  // uint8_t sat8 = beatsin88( 87, 220, 250);
  uint8_t brightdepth = beatsin88( 341, 96, 224);
  uint16_t brightnessthetainc16 = beatsin88( 203, (25 * 256), (40 * 256));
  uint8_t msmultiplier = beatsin88(147, 23, 60);

  uint16_t hue16 = sHue16;//gHue * 256;
  uint16_t hueinc16 = beatsin88(113, 300, 1500);

  uint16_t ms = millis();
  uint16_t deltams = ms - sLastMillis ;
  sLastMillis  = ms;
  sPseudotime += deltams * msmultiplier;
  sHue16 += deltams * beatsin88( 400, 5, 9);
  uint16_t brightnesstheta16 = sPseudotime;

  for ( uint16_t i = 0 ; i < NUM_LEDS; i++) {
    hue16 += hueinc16;
    uint8_t hue8 = hue16 / 256;
    uint16_t h16_128 = hue16 >> 7;
    if ( h16_128 & 0x100) {
      hue8 = 255 - (h16_128 >> 1);
    } else {
      hue8 = h16_128 >> 1;
    }

    brightnesstheta16  += brightnessthetainc16;
    uint16_t b16 = sin16( brightnesstheta16  ) + 32768;

    uint16_t bri16 = (uint32_t)((uint32_t)b16 * (uint32_t)b16) / 65536;
    uint8_t bri8 = (uint32_t)(((uint32_t)bri16) * brightdepth) / 65536;
    bri8 += (255 - brightdepth);

    uint8_t index = hue8;
    //index = triwave8( index);
    index = scale8( index, 240);

    CRGB newcolor = ColorFromPalette(gCurrentPalette, index, bri8);

    nblend(leds[i], newcolor, 128);
  }
}

// Alternate rendering function just scrolls the current palette
// across the defined LED strip.
void palettetest()
{
  static uint8_t startindex = 0;
  startindex--;
  fill_palette( leds, NUM_LEDS, startindex, (256 / NUM_LEDS) + 1, gCurrentPalette, 255, LINEARBLEND);
}
void INITIALIZE() {
  InitMSGEQ7();
  InitNoise();
}
// wake up the MSGEQ7
void InitMSGEQ7() {
  analogReference(DEFAULT);              // change
  pinMode(MSGEQ7_RESET_PIN,  OUTPUT);
  pinMode(MSGEQ7_STROBE_PIN, OUTPUT);
  pinMode(AUDIO_LEFT_PIN,   INPUT);
  digitalWrite(MSGEQ7_RESET_PIN, LOW);
  digitalWrite(MSGEQ7_STROBE_PIN, LOW);
  //RESET MSGEQ7
  digitalWrite(MSGEQ7_RESET_PIN,  HIGH);
  delay(1);
  digitalWrite(MSGEQ7_RESET_PIN,  LOW);
  digitalWrite(MSGEQ7_STROBE_PIN, HIGH);
  delay(1);
}

void READ_AUDIO() {

  prev_left  = left_volume;


  prev_left_amp  = half_MAPPED_LEFT_AMP;


  left_volume  = 0.0;

  mono_volume  = 0;
  left_factor  = 0.0;

  mono_factor  = 0;

  digitalWrite(MSGEQ7_RESET_PIN, HIGH);
  digitalWrite(MSGEQ7_RESET_PIN, LOW);
  delayMicroseconds(1);

  for (int band = 0; band < 7; band++)
  {

    filter_min = FILTER_MIN[band];
    digitalWrite(MSGEQ7_STROBE_PIN, LOW);
    delayMicroseconds(36);

    prev_value  = left[band];
    left_value  = analogRead(AUDIO_LEFT_PIN);
    //left_value  -= (left_value * EQ[band]);
    left_value  = constrain(left_value, filter_min, filter_max);
    left_value  = map(left_value, filter_min, filter_max, 0, 255);
    left[band]  = prev_value + (left_value - prev_value) * lowPass_audio;
    left_volume += left[band];


   

    digitalWrite(MSGEQ7_STROBE_PIN, HIGH);
    delayMicroseconds(1);

    mono[band]   = (left[band]) * 0.5;
    mono_volume += mono[band];

    //IF DEF is (this effect) then do these extra/specfic tasks *stereo_vu*
  }

  //mono_volume  /= 7;
  //left_volume  /= 7;
  //right_volume /= 7;
//  new_left = (left_volume  / 7);
//  new_left = prev_left + (new_left - prev_left) * 0.005;
//  new_right = (right_volume / 7);
//  new_right = prev_right + (new_right - prev_right) * 0.005;
//
//  left_filter_max  = new_left;
//  right_filter_max = new_right;


  left_factor   = float(HALF_POS) / left_volume;
  mono_factor   = float(HALF_POS) / mono_volume;
  //if(mono_factor < 0.01) mono_factor = 0;
  full_factor   = float(NUM_LEDS) / mono_volume;

  for (int band = 0; band < 7; band++)
  {

    full_flex[band] = mono[band] * full_factor;

    mapped[band]    = mono[band] * mono_factor;

    //    if (half_MAPPED_AMP < 2) {
    //      half_MAPPED_AMP -= 2;
    //    }
    //    mapped[band] = half_MAPPED_AMP;

    half_MAPPED_LEFT_AMP = floor(left[band]  * left_factor);
    //    if (half_MAPPED_LEFT_AMP < 3) {
    //      half_MAPPED_LEFT_AMP -= 3;
    //    }
    mapped_left[band]    = half_MAPPED_LEFT_AMP;



    //full_mapped[band]     = left[6 - band]  * left_factor;
    //full_mapped[band + 7] = right[band] * right_factor;

    // }

  }
}
void radiate() {
  READ_AUDIO();
  //int SPEED = mono[0] * 0.004;
  //HALF_POS = beatsin8(40, 30 + SPEED, 80 + SPEED);
  MILLISECONDS  = 0;
  //lowPass_audio = 0.10;
  //filter_min    = 100;

  //  EVERY_N_MILLISECONDS(50) {
  //    hue++;
  //    if ( hue > 255) hue = 0;
  //  }


  zero_l  = left[0];
  three_l = left[3];
  six_l   = left[6];

  zero_r  = right[0];
  three_r = right[3];
  six_r   = right[6];

  leds[HALF_POS] = CRGB(zero_l, three_l, six_l);
  leds[HALF_POS + 1] = CRGB(zero_r, three_r, six_r);
  //leds[HALF_POS].fadeToBlackBy(30);


  EVERY_N_MILLISECONDS(11) {
    for (int i = NUM_LEDS - 1; i > HALF_POS + 1; i--) {
      leds[i].blue = leds[i - 1].blue;
    }
    for (int i = 0; i < HALF_POS; i++) {
      leds[i].blue = leds[i + 1].blue;
    }
  }
  EVERY_N_MILLISECONDS(27) {
    for (int i = NUM_LEDS - 1; i > HALF_POS + 1; i--) {
      leds[i].green = leds[i - 1].green;
    }
    for (int i = 0; i < HALF_POS; i++) {
      leds[i].green = leds[i + 1].green;
    }
  }
  EVERY_N_MILLISECONDS(52) {
    for (int i = NUM_LEDS - 1; i > HALF_POS + 1; i--) {
      leds[i].red = leds[i - 1].red;
    }
    for (int i = 0; i < HALF_POS; i++) {
      leds[i].red = leds[i + 1].red;
    }
  }

  EVERY_N_MILLISECONDS(2) {
    //blur1d(leds, NUM_LEDS, 1);
  }
  FastLED.show();
}
void printaudio() {
  READ_AUDIO();
  for (int band = 0; band < 7; band++) {
    Serial.print(mono[band]);
    Serial.print("\t");
  }
  Serial.println();
}
void InitNoise() {
  x = random16();
  y = random16();
  z = random16();
  dist = random16(12345);
}