Build your image

docker build -t webapp .

Option 1: Run your Docker Containers (port mode)

docker run \
--name=webapp \
-p 8080:80 \
-dt \
 webapp

Access your website at http://localhost:8080

Option 2: Run your Docker Containers (per-ip mode)

Before your run the following commands, make sure you have enabled experimental features of Docker.

To enable experimental features of Docker for macvlan deployments of containers, enter the following commands on your ubuntu docker host:

echo '{"experimental": true}' > /etc/docker/daemon.json
service docker restart 	

Set up your MacVlan network

Enter in the following commands to set up your docker network on the same L2 subnet as your docker host sharing the hosts' network interface for bridging packets across the underlay.

Replace network values (172.16.10.X) and network interface label (eth1) for your own L2 subnet and its interface that the docker host resides on.

docker network create -d macvlan \
--subnet=172.16.10.0/24 \
--ip-range=172.16.10.128/25 \
--gateway=172.16.10.1 \
-o parent=eth1 MACv-Net

Run the container with static IP

docker run
--name=webapp
--net=MACv-Net
--ip=172.16.10.199
-dt
webapp

For example, access your website at http://172.16.10.199

Remember to replace with your IP address when testing.