Update WHATS_NEW.md

Duet3D · Sep 1, 2017 · 77d6718 · 77d6718
1 parent cfd6cfa
commit 77d6718
Showing 1 changed file with 6 additions and 6 deletions.
diff --git a/WHATS_NEW.md b/WHATS_NEW.md
@@ -1,15 +1,15 @@
 Summary of important changes in recent versions
 ===============================================
 
-Version 1.19.1
+Version 1.19.2
 ==============
 
-Upgrade notes:
+Upgrade notes from version 1.19:
 - If your printer is a SCARA then you now need to set appropriate M208 lower and upper limits for X and Y
-- If you are upgrading a Duet WiFi from firmware 1.19, install DuetWiFiFirmware 1.19.1 first, and confirm that the new version is running before installing DuetWiFiServer 1.19.1
+- If you are upgrading a Duet WiFi from firmware 1.19, install DuetWiFiFirmware 1.19.2 first, and confirm that the new version is running before installing DuetWiFiServer 1.19.2
 - **Important!** See also the upgrade notes for version 1.19 if you are upgrading from 1.18.2 or earlier
 - Recommended DuetWebControl version is 1.19
-- Recommended DuetWiFiServer version is 1.19.1
+- Recommended DuetWiFiServer version is 1.19.2
 
 New and changed features:
 - M37 P parameter is supported. If you send M37 P"file.g" then printing file.g will be simulated and the expected print time reported.
@@ -21,7 +21,7 @@ New and changed features:
 - SCARA printers now apply the M208 axis limits to X and Y as well as to other axes. Minimum and maximum radius limits are still applied too.
 - SCARA M669 S and T parameters can be changed on the fly, i.e. re-homing is no longer required when they are changed
 - Minimum limits are applied to the parameters of M92, M201 and M203 commands to avoid firmware crashes if bad values are supplied
-- In conjunction with DuetWiFiServer 1.19.1, if connection to the access point is lost and the automatic reconnection attempt fails, the WiFi module will attempt a manual reconnect. Reconnection attempts are reported to PanelDue and to USB, and the reconnect count is included in the M122 report.
+- In conjunction with DuetWiFiServer 1.19.2, if connection to the access point is lost and the automatic reconnection attempt fails, the WiFi module will attempt a manual reconnect. Reconnection attempts are reported to PanelDue and to USB, and the reconnect count is included in the M122 report.
 - Jerk is no longer applied to the boundaries between travel moves and printing moves
 
 Bug fixes:
@@ -39,7 +39,7 @@ Bug fixes:
 Version 1.19
 ============
 
-Upgrade notes:
+Upgrade notes from version 1.18.2:
 - Recommended DuetWebControl version is 1.19
 - Recommended DuetWiFiServer version is 1.19
 - **Important!** If you use an IR Z probe or some other type that does not need to be deployed, delete the files sys/deployprobe and sys/retractprobe.g if they exist, because they are now called automatically. You can do this in the System Files Editor of the web interface.