DYN-7963 Obsolote Excel Interop Nodes #15743

RobertGlobant20 · 2025-01-06T23:18:59Z

Purpose

I've added an obsolete warning message for excel nodes that are using interop, this is the list of nodes obsoleted:

ReadExcelFile -GetWorksheetsFromExcelWorkbook
-GetExcelWorksheetByName
-GetDataFromExcelWorksheet
-WriteDataToExcelWorksheet
-AddExcelWorksheetToWorkbook
-NewExcelWorkbook
-SaveAsExcelWorkbook
-ReadFromFile
-WriteToFile
-ImportExcel
-ExportToExcel

Also I've changed the category of the Excel tests using interop from ExcelTest to ExcelTestInterop

Declarations

Check these if you believe they are true

The codebase is in a better state after this PR
Is documented according to the standards
The level of testing this PR includes is appropriate
User facing strings, if any, are extracted into *.resx files
All tests pass using the self-service CI.
Snapshot of UI changes, if any.
Changes to the API follow Semantic Versioning and are documented in the API Changes document.
This PR modifies some build requirements and the readme is updated
This PR contains no files larger than 50 MB

Release Notes

Obsolete excel nodes that use interop and change the category of tests using excel interop.

Reviewers

@QilongTang

FYIs

I've added an obsolete warning message for excel nodes that are using interop, this is the list of nodes obsoleted: - ReadExcelFile -GetWorksheetsFromExcelWorkbook -GetExcelWorksheetByName -GetDataFromExcelWorksheet -WriteDataToExcelWorksheet -AddExcelWorksheetToWorkbook -NewExcelWorkbook -SaveAsExcelWorkbook -ReadFromFile -WriteToFile -ImportExcel -ExportToExcel Also I've changed the category of the Excel tests using interop from ExcelTest to ExcelTestInterop

github-actions

See the ticket for this pull request: https://jira.autodesk.com/browse/DYN-7963

github-actions · 2025-01-06T23:45:04Z

UI Smoke Tests

Test: success. 11 passed, 0 failed.
TestComplete Test Result
Workflow Run: UI Smoke Tests
Check: UI Smoke Tests

QilongTang · 2025-01-07T02:50:48Z

Hi @RobertGlobant20 Please double check the node list, I dont think some of these nodes exist because they were marked with IsVisibleInDynamoLibrary(false) right?

Please also attach the UI screen shot for node with warning message, thanks

RobertGlobant20 · 2025-01-07T16:51:33Z

This is a screenshot of the warning message shown for obsolete nodes.

RobertGlobant20 · 2025-01-07T16:55:53Z

Hi @RobertGlobant20 Please double check the node list, I dont think some of these nodes exist because they were marked with IsVisibleInDynamoLibrary(false) right?

Please also attach the UI screen shot for node with warning message, thanks

@QilongTang during the implementation I noticed that those nodes were marked as IsVisibleInDynamoLibrary(false) as you said but also noticed that several of those nodes are being used in ExcelTests (even when they are not visible in Library).
Then if they are not visible in library should they have the warning message or not? if the warning message is not visible for NotVisibleInLibrary nodes then users that open old graphs with those nodes won't see the message.

QilongTang · 2025-01-07T18:48:36Z

@RobertGlobant20 Good point. I missed those legacy nodes. I think this LGTM. I will request a review from BRE team.
BTW, BRE passed a list of tests failed without Excel installed, can you check the additional tests in https://master-15.jenkins.autodesk.com/view/DYN/job/DYN-EngOps/job/DYN-VerifyMachine/61/testReport/? They may also need this category to be applied

mjkkirschner · 2025-01-08T00:47:57Z

src/Libraries/DSOffice/Excel.cs

@@ -223,7 +235,8 @@ public static object[][] ImportExcel(FileInfo file, string sheetName, bool readA
        /// <param name="overWrite">True to overwrite file, false not to overwrite</param>
        /// <returns name="data">Data written to the spreadsheet</returns>
        /// <search>office,excel,spreadsheet</search>
-        [Obsolete("Use ExportToExcel instead.")] 
+        [NodeObsolete("ExcelInteropObsoleteNode", typeof(Properties.Resources))]
+        [Obsolete("Use ExportToExcel instead.")]


I don't think this is well tested.

I've removed the Obsolete decorator in the next commit: e4af9e6

test/Libraries/DynamoMSOfficeTests/ExcelTests.cs

I've updated the Category to contains ExcelTest and also the new Category ExcelTestInterop. Also there was one test using the decorator Obsolete so I removed that decorator due that is not well tested.

Adding decorator to missing excel test

RobertGlobant20 · 2025-01-08T17:07:11Z

@RobertGlobant20 Good point. I missed those legacy nodes. I think this LGTM. I will request a review from BRE team. BTW, BRE passed a list of tests failed without Excel installed, can you check the additional tests in https://master-15.jenkins.autodesk.com/view/DYN/job/DYN-EngOps/job/DYN-VerifyMachine/61/testReport/? They may also need this category to be applied

@QilongTang there was just one failing test missing the decorator then the change was done in the next commit: 2ae7411
For the other ones failing I found that they are not using excel nodes but if they are still failing I can check them in detail.

This is the list of tests reported that are failing:

Dynamo.Tests.ExcelTests+DSEvaluationModelTest.TestExcel - this is the only fixed
DynamoCoreWpfTests.PreviewBubbleTests.PreviewBubble_ShowExpandedPreviewOnPinIconHover
DynamoCoreWpfTests.NodeViewTests.ZIndex_NodeAsMemberOfGroup
DynamoCoreWpfTests.PreviewBubbleTests.PreviewBubble_ToggleShowPreviewBubbles
DynamoCoreWpfTests.PreviewBubbleTests.PreviewBubbleVisible_MouseMoveOutOfNode

QilongTang · 2025-01-08T17:27:44Z

Thank you @RobertGlobant20 Can you check this tests run report as well, BRE team mentioned that did a test run with the new category you added and got this report.

RobertGlobant20 · 2025-01-08T18:31:48Z

Thank you @RobertGlobant20 Can you check this tests run report as well, BRE team mentioned that did a test run with the new category you added and got this report.
@QilongTang
I was checking that report and please correct me if I'm wrong but the DYN-VerifyMachine job is configured to run on master branch (this PR has not been merged yet) so the filter added --filter "TestCategory!=FailureNET6&TestCategory!=Failure&TestCategory!=ExcelTestInterop" in the DYN-VerifyMachine job configuration didn't work , then is reporting that most of the tests in DynamoMSOfficeTests.ExcelTests are failing, once this change is merged to master with this filter we should be executing only 6 tests in DynamoMSOfficeTests.ExcelTests (I already tested in my local machine and is working).

QilongTang · 2025-01-08T18:34:07Z

@RobertGlobant20 Thank you for the validation, LGTM. Waiting for PR checks

RobertGlobant20 · 2025-01-08T19:51:01Z

There is one test failing but is not related to my changes then I will re-trigger the job
NodeDocumentationMarkdownGeneratorTests.MarkdownGeneratorCommandTests.ProducesCorrectOutputFromCoreDirectory_preloadedbinaries()

QilongTang · 2025-01-09T04:20:28Z

There is one test failing but is not related to my changes then I will re-trigger the job NodeDocumentationMarkdownGeneratorTests.MarkdownGeneratorCommandTests.ProducesCorrectOutputFromCoreDirectory_preloadedbinaries()

Hi @RobertGlobant20 It looks like the test failed again? Would you run it locally to make a call

RobertGlobant20 · 2025-01-09T15:20:32Z

ProducesCorrectOutputFromCoreDirectory_preloadedbinaries()

it is passing locally in my computer, I will check the test in detail for understand what is happening.

Adding more info to the ProducesCorrectOutputFromCoreDirectory_preloadedbinaries() test so we know which md files are missing. THIS CHANGE WILL BE REVERTED, LATER

QilongTang · 2025-01-09T22:42:21Z

I ran a comparison between https://master-15.jenkins.autodesk.com/view/DYN/job/DYN-DevCI_Self_Service/1458/ and https://master-15.jenkins.autodesk.com/view/DYN/job/DYN-DevCI_Self_Service/1459/, the test pass on master but not your branch. BTW you dont have to run all tests to get the result

QilongTang · 2025-01-09T22:43:43Z

test/Tools/NodeDocumentationMarkdownGeneratorTests/MarkdownGeneratorCommandTests.cs

@@ -146,6 +146,7 @@ public void ProducesCorrectOutputFromCoreDirectory_preloadedbinaries()
        {
            // Arrange
            var testOutputDirName = "TestMdOutput_CoreNodeModels";
+            var expectedMDList = new List<string>() {"Analysis.Label.ByPointAndString.md", "Autodesk.DesignScript.Geometry.Arc.ByBestFitThroughPoints.md", "Autodesk.DesignScript.Geometry.Arc.ByCenterPointRadiusAngle.md", "Autodesk.DesignScript.Geometry.Arc.ByCenterPointStartPointEndPoint.md", "Autodesk.DesignScript.Geometry.Arc.ByCenterPointStartPointSweepAngle.md", "Autodesk.DesignScript.Geometry.Arc.ByFillet.md", "Autodesk.DesignScript.Geometry.Arc.ByFilletTangentToCurve.md", "Autodesk.DesignScript.Geometry.Arc.ByStartEndAndTangencies.md", "Autodesk.DesignScript.Geometry.Arc.ByStartPointEndPointStartTangent.md", "Autodesk.DesignScript.Geometry.Arc.ByThreePoints.md", "Autodesk.DesignScript.Geometry.Arc.CenterPoint.md", "Autodesk.DesignScript.Geometry.Arc.Radius.md", "Autodesk.DesignScript.Geometry.Arc.StartAngle.md", "Autodesk.DesignScript.Geometry.Arc.SweepAngle.md", "Autodesk.DesignScript.Geometry.BoundingBox.ByCorners.md", "Autodesk.DesignScript.Geometry.BoundingBox.ByGeometry.md", "Autodesk.DesignScript.Geometry.BoundingBox.ByMinimumVolume.md", "Autodesk.DesignScript.Geometry.BoundingBox.Contains.md", "Autodesk.DesignScript.Geometry.BoundingBox.ContextCoordinateSystem.md", "Autodesk.DesignScript.Geometry.BoundingBox.Intersection.md", "Autodesk.DesignScript.Geometry.BoundingBox.Intersects.md", "Autodesk.DesignScript.Geometry.BoundingBox.IsEmpty.md", "Autodesk.DesignScript.Geometry.BoundingBox.MaxPoint.md", "Autodesk.DesignScript.Geometry.BoundingBox.MinPoint.md", "Autodesk.DesignScript.Geometry.BoundingBox.ToCuboid.md", "Autodesk.DesignScript.Geometry.BoundingBox.ToPolySurface.md", "Autodesk.DesignScript.Geometry.Circle.ByBestFitThroughPoints.md", "Autodesk.DesignScript.Geometry.Circle.ByCenterPointRadius.md", "Autodesk.DesignScript.Geometry.Circle.ByCenterPointRadiusNormal.md", "Autodesk.DesignScript.Geometry.Circle.ByPlaneRadius.md", "Autodesk.DesignScript.Geometry.Circle.ByThreePoints.md", "Autodesk.DesignScript.Geometry.Circle.CenterPoint.md", "Autodesk.DesignScript.Geometry.Circle.Radius.md", "Autodesk.DesignScript.Geometry.Cone.ByCoordinateSystemHeightRadii.md", "Autodesk.DesignScript.Geometry.Cone.ByCoordinateSystemHeightRadius.md", "Autodesk.DesignScript.Geometry.Cone.ByPointsRadii.md", "Autodesk.DesignScript.Geometry.Cone.ByPointsRadius.md", "Autodesk.DesignScript.Geometry.Cone.EndPoint.md", "Autodesk.DesignScript.Geometry.Cone.EndRadius.md", "Autodesk.DesignScript.Geometry.Cone.Height.md", "Autodesk.DesignScript.Geometry.Cone.RadiusRatio.md", "Autodesk.DesignScript.Geometry.Cone.StartPoint.md", "Autodesk.DesignScript.Geometry.Cone.StartRadius.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.ByCylindricalCoordinates.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.ByOrigin(origin).md", "Autodesk.DesignScript.Geometry.CoordinateSystem.ByOrigin(x, y).md", "Autodesk.DesignScript.Geometry.CoordinateSystem.ByOrigin(x, y, z).md", "Autodesk.DesignScript.Geometry.CoordinateSystem.ByOriginVectors(origin, xAxis, yAxis).md", "Autodesk.DesignScript.Geometry.CoordinateSystem.ByOriginVectors(origin, xAxis, yAxis, zAxis).md", "Autodesk.DesignScript.Geometry.CoordinateSystem.ByPlane.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.BySphericalCoordinates.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Determinant.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Identity.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Inverse.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.IsEqualTo.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.IsScaledOrtho.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.IsSingular.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.IsUniscaledOrtho.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Mirror.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Origin.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.PostMultiplyBy.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.PreMultiplyBy.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Rotate(origin, axis, degrees).md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Rotate(plane, degrees).md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Scale(amount).md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Scale(basePoint, from, to).md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Scale(plane, xamount, yamount, zamount).md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Scale(xamount, yamount, zamount).md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Scale1D.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Scale2D.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.ScaleFactor.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Transform(coordinateSystem).md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Transform(fromCoordinateSystem, contextCoordinateSystem).md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Translate(direction).md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Translate(direction, distance).md", "Autodesk.DesignScript.Geometry.CoordinateSystem.Translate(xTranslation, yTranslation, zTranslation).md", "Autodesk.DesignScript.Geometry.CoordinateSystem.XAxis.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.XScaleFactor.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.XYPlane.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.YAxis.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.YScaleFactor.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.YZPlane.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.ZAxis.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.ZScaleFactor.md", "Autodesk.DesignScript.Geometry.CoordinateSystem.ZXPlane.md", "Autodesk.DesignScript.Geometry.Cuboid.ByCorners.md", "Autodesk.DesignScript.Geometry.Cuboid.ByLengths(coordinateSystem, width, length, height).md", "Autodesk.DesignScript.Geometry.Cuboid.ByLengths(origin, width, length, height).md", "Autodesk.DesignScript.Geometry.Cuboid.ByLengths(width, length, height).md", "Autodesk.DesignScript.Geometry.Cuboid.Height.md", "Autodesk.DesignScript.Geometry.Cuboid.Length.md", "Autodesk.DesignScript.Geometry.Cuboid.Width.md", "Autodesk.DesignScript.Geometry.Curve.ApproximateWithArcAndLineSegments.md", "Autodesk.DesignScript.Geometry.Curve.ByBlendBetweenCurves.md", "Autodesk.DesignScript.Geometry.Curve.ByIsoCurveOnSurface.md", "Autodesk.DesignScript.Geometry.Curve.ByParameterLineOnSurface.md", "Autodesk.DesignScript.Geometry.Curve.CoordinateSystemAtParameter.md", "Autodesk.DesignScript.Geometry.Curve.CoordinateSystemAtSegmentLength.md", "Autodesk.DesignScript.Geometry.Curve.EndParameter.md", "Autodesk.DesignScript.Geometry.Curve.EndPoint.md", "Autodesk.DesignScript.Geometry.Curve.Extend.md", "Autodesk.DesignScript.Geometry.Curve.ExtendEnd.md", "Autodesk.DesignScript.Geometry.Curve.ExtendStart.md", "Autodesk.DesignScript.Geometry.Curve.Extrude(direction).md", "Autodesk.DesignScript.Geometry.Curve.Extrude(direction, distance).md", "Autodesk.DesignScript.Geometry.Curve.Extrude(distance).md", "Autodesk.DesignScript.Geometry.Curve.ExtrudeAsSolid(direction).md", "Autodesk.DesignScript.Geometry.Curve.ExtrudeAsSolid(direction, distance).md", "Autodesk.DesignScript.Geometry.Curve.ExtrudeAsSolid(distance).md", "Autodesk.DesignScript.Geometry.Curve.HorizontalFrameAtParameter.md", "Autodesk.DesignScript.Geometry.Curve.IsClosed.md", "Autodesk.DesignScript.Geometry.Curve.IsPlanar.md", "Autodesk.DesignScript.Geometry.Curve.Join.md", "Autodesk.DesignScript.Geometry.Curve.Length.md", "Autodesk.DesignScript.Geometry.Curve.Normal.md", "Autodesk.DesignScript.Geometry.Curve.NormalAtParameter(param).md", "Autodesk.DesignScript.Geometry.Curve.NormalAtParameter(param, side).md", "Autodesk.DesignScript.Geometry.Curve.OffsetMany.md", "Autodesk.DesignScript.Geometry.Curve.ParameterAtChordLength.md", "Autodesk.DesignScript.Geometry.Curve.ParameterAtPoint.md", "Autodesk.DesignScript.Geometry.Curve.ParameterAtSegmentLength.md", "Autodesk.DesignScript.Geometry.Curve.Patch.md", "Autodesk.DesignScript.Geometry.Curve.PlaneAtParameter.md", "Autodesk.DesignScript.Geometry.Curve.PlaneAtSegmentLength.md", "Autodesk.DesignScript.Geometry.Curve.PointAtChordLength.md", "Autodesk.DesignScript.Geometry.Curve.PointAtParameter.md", "Autodesk.DesignScript.Geometry.Curve.PointAtSegmentLength.md", "Autodesk.DesignScript.Geometry.Curve.PointsAtChordLengthFromPoint.md", "Autodesk.DesignScript.Geometry.Curve.PointsAtEqualChordLength.md", "Autodesk.DesignScript.Geometry.Curve.PointsAtEqualSegmentLength.md", "Autodesk.DesignScript.Geometry.Curve.PointsAtSegmentLengthFromPoint.md", "Autodesk.DesignScript.Geometry.Curve.Project.md", "Autodesk.DesignScript.Geometry.Curve.PullOntoPlane.md", "Autodesk.DesignScript.Geometry.Curve.PullOntoSurface.md", "Autodesk.DesignScript.Geometry.Curve.Reverse.md", "Autodesk.DesignScript.Geometry.Curve.SegmentLengthAtParameter.md", "Autodesk.DesignScript.Geometry.Curve.SegmentLengthBetweenParameters.md", "Autodesk.DesignScript.Geometry.Curve.Simplify.md", "Autodesk.DesignScript.Geometry.Curve.SplitByParameter.md", "Autodesk.DesignScript.Geometry.Curve.SplitByPoints.md", "Autodesk.DesignScript.Geometry.Curve.StartParameter.md", "Autodesk.DesignScript.Geometry.Curve.StartPoint.md", "Autodesk.DesignScript.Geometry.Curve.SweepAsSolid.md", "Autodesk.DesignScript.Geometry.Curve.SweepAsSurface.md", "Autodesk.DesignScript.Geometry.Curve.TangentAtParameter.md", "Autodesk.DesignScript.Geometry.Curve.ToNurbsCurve.md", "Autodesk.DesignScript.Geometry.Curve.TrimByEndParameter.md", "Autodesk.DesignScript.Geometry.Curve.TrimByParameter.md", "Autodesk.DesignScript.Geometry.Curve.TrimByStartParameter.md", "Autodesk.DesignScript.Geometry.Curve.TrimInteriorByParameter.md", "Autodesk.DesignScript.Geometry.Curve.TrimSegmentsByParameter.md", "Autodesk.DesignScript.Geometry.Cylinder.Axis.md", "Autodesk.DesignScript.Geometry.Cylinder.ByPointsRadius.md", "Autodesk.DesignScript.Geometry.Cylinder.ByRadiusHeight.md", "Autodesk.DesignScript.Geometry.Cylinder.Height.md", "Autodesk.DesignScript.Geometry.Cylinder.Radius.md", "Autodesk.DesignScript.Geometry.DebugTools.DisableAsmJournaling.md", "Autodesk.DesignScript.Geometry.DebugTools.EnableAsmJournaling.md", "Autodesk.DesignScript.Geometry.Edge.AdjacentFaces.md", "Autodesk.DesignScript.Geometry.Edge.CurveGeometry.md", "Autodesk.DesignScript.Geometry.Edge.EndVertex.md", "Autodesk.DesignScript.Geometry.Edge.StartVertex.md", "Autodesk.DesignScript.Geometry.Ellipse.ByCoordinateSystemRadii.md", "Autodesk.DesignScript.Geometry.Ellipse.ByOriginRadii.md", "Autodesk.DesignScript.Geometry.Ellipse.ByOriginVectors.md", "Autodesk.DesignScript.Geometry.Ellipse.ByPlaneRadii.md", "Autodesk.DesignScript.Geometry.Ellipse.CenterPoint.md", "Autodesk.DesignScript.Geometry.Ellipse.MajorAxis.md", "Autodesk.DesignScript.Geometry.Ellipse.MinorAxis.md", "Autodesk.DesignScript.Geometry.EllipseArc.ByPlaneRadiiAngles.md", "Autodesk.DesignScript.Geometry.EllipseArc.CenterPoint.md", "Autodesk.DesignScript.Geometry.EllipseArc.MajorAxis.md", "Autodesk.DesignScript.Geometry.EllipseArc.MinorAxis.md", "Autodesk.DesignScript.Geometry.EllipseArc.Plane.md", "Autodesk.DesignScript.Geometry.EllipseArc.StartAngle.md", "Autodesk.DesignScript.Geometry.EllipseArc.SweepAngle.md", "Autodesk.DesignScript.Geometry.Face.Edges.md", "Autodesk.DesignScript.Geometry.Face.SurfaceGeometry.md", "Autodesk.DesignScript.Geometry.Face.Vertices.md", "Autodesk.DesignScript.Geometry.Geometry.BoundingBox.md", "Autodesk.DesignScript.Geometry.Geometry.ClosestPointTo.md", "Autodesk.DesignScript.Geometry.Geometry.ContextCoordinateSystem.md", "Autodesk.DesignScript.Geometry.Geometry.DistanceTo.md", "Autodesk.DesignScript.Geometry.Geometry.DoesIntersect.md", "Autodesk.DesignScript.Geometry.Geometry.Explode.md", "Autodesk.DesignScript.Geometry.Geometry.ExportToSAT.md", "Autodesk.DesignScript.Geometry.Geometry.FromSolidDef.md", "Autodesk.DesignScript.Geometry.Geometry.Intersect.md", "Autodesk.DesignScript.Geometry.Geometry.IntersectAll.md", "Autodesk.DesignScript.Geometry.Geometry.IsAlmostEqualTo.md", "Autodesk.DesignScript.Geometry.Geometry.Mirror.md", "Autodesk.DesignScript.Geometry.Geometry.OrientedBoundingBox.md", "Autodesk.DesignScript.Geometry.Geometry.Rotate(basePlane, degrees).md", "Autodesk.DesignScript.Geometry.Geometry.Rotate(origin, axis, degrees).md", "Autodesk.DesignScript.Geometry.Geometry.Scale(amount).md", "Autodesk.DesignScript.Geometry.Geometry.Scale(basePoint, from, to).md", "Autodesk.DesignScript.Geometry.Geometry.Scale(plane, xamount, yamount, zamount).md", "Autodesk.DesignScript.Geometry.Geometry.Scale(xamount, yamount, zamount).md", "Autodesk.DesignScript.Geometry.Geometry.Scale1D.md", "Autodesk.DesignScript.Geometry.Geometry.Scale2D.md", "Autodesk.DesignScript.Geometry.Geometry.SerializeAsSAB.md", "Autodesk.DesignScript.Geometry.Geometry.Split.md", "Autodesk.DesignScript.Geometry.Geometry.ToSolidDef.md", "Autodesk.DesignScript.Geometry.Geometry.Transform(cs).md", "Autodesk.DesignScript.Geometry.Geometry.Transform(fromCoordinateSystem, contextCoordinateSystem).md", "Autodesk.DesignScript.Geometry.Geometry.Translate(direction).md", "Autodesk.DesignScript.Geometry.Geometry.Translate(direction, distance).md", "Autodesk.DesignScript.Geometry.Geometry.Translate(xTranslation, yTranslation, zTranslation).md", "Autodesk.DesignScript.Geometry.Geometry.Trim.md", "Autodesk.DesignScript.Geometry.Helix.Angle.md", "Autodesk.DesignScript.Geometry.Helix.AxisDirection.md", "Autodesk.DesignScript.Geometry.Helix.AxisPoint.md", "Autodesk.DesignScript.Geometry.Helix.ByAxis.md", "Autodesk.DesignScript.Geometry.Helix.Pitch.md", "Autodesk.DesignScript.Geometry.Helix.Radius.md", "Autodesk.DesignScript.Geometry.IndexGroup.A.md", "Autodesk.DesignScript.Geometry.IndexGroup.B.md", "Autodesk.DesignScript.Geometry.IndexGroup.ByIndices(a, b, c).md", "Autodesk.DesignScript.Geometry.IndexGroup.ByIndices(a, b, c, d).md", "Autodesk.DesignScript.Geometry.IndexGroup.C.md", "Autodesk.DesignScript.Geometry.IndexGroup.Count.md", "Autodesk.DesignScript.Geometry.IndexGroup.D.md", "Autodesk.DesignScript.Geometry.Line.ByBestFitThroughPoints.md", "Autodesk.DesignScript.Geometry.Line.ByStartPointDirectionLength.md", "Autodesk.DesignScript.Geometry.Line.ByStartPointEndPoint.md", "Autodesk.DesignScript.Geometry.Line.ByTangency.md", "Autodesk.DesignScript.Geometry.Line.Direction.md", "Autodesk.DesignScript.Geometry.Mesh.Area.md", "Autodesk.DesignScript.Geometry.Mesh.BooleanDifference.md", "Autodesk.DesignScript.Geometry.Mesh.BooleanIntersection.md", "Autodesk.DesignScript.Geometry.Mesh.BooleanUnion.md", "Autodesk.DesignScript.Geometry.Mesh.BoundingBox.md", "Autodesk.DesignScript.Geometry.Mesh.ByGeometry.md", "Autodesk.DesignScript.Geometry.Mesh.ByPointsFaceIndices.md", "Autodesk.DesignScript.Geometry.Mesh.ByVerticesAndIndices.md", "Autodesk.DesignScript.Geometry.Mesh.CloseCracks.md", "Autodesk.DesignScript.Geometry.Mesh.Cone.md", "Autodesk.DesignScript.Geometry.Mesh.Cuboid.md", "Autodesk.DesignScript.Geometry.Mesh.EdgeCount.md", "Autodesk.DesignScript.Geometry.Mesh.Edges.md", "Autodesk.DesignScript.Geometry.Mesh.EdgesAsSixNumbers.md", "Autodesk.DesignScript.Geometry.Mesh.Explode.md", "Autodesk.DesignScript.Geometry.Mesh.ExportMeshes.md", "Autodesk.DesignScript.Geometry.Mesh.ExtrudePolyCurve.md", "Autodesk.DesignScript.Geometry.Mesh.FaceIndices.md", "Autodesk.DesignScript.Geometry.Mesh.GenerateSupport.md", "Autodesk.DesignScript.Geometry.Mesh.ImportFile.md", "Autodesk.DesignScript.Geometry.Mesh.Intersect.md", "Autodesk.DesignScript.Geometry.Mesh.MakeHollow.md", "Autodesk.DesignScript.Geometry.Mesh.MakeWatertight.md", "Autodesk.DesignScript.Geometry.Mesh.Mirror.md", "Autodesk.DesignScript.Geometry.Mesh.Nearest.md", "Autodesk.DesignScript.Geometry.Mesh.Plane.md", "Autodesk.DesignScript.Geometry.Mesh.PlaneCut.md", "Autodesk.DesignScript.Geometry.Mesh.Project.md", "Autodesk.DesignScript.Geometry.Mesh.Reduce.md", "Autodesk.DesignScript.Geometry.Mesh.Remesh.md", "Autodesk.DesignScript.Geometry.Mesh.Repair.md", "Autodesk.DesignScript.Geometry.Mesh.Rotate.md", "Autodesk.DesignScript.Geometry.Mesh.Scale(scaleFactor).md", "Autodesk.DesignScript.Geometry.Mesh.Scale(x, y, z).md", "Autodesk.DesignScript.Geometry.Mesh.Smooth.md", "Autodesk.DesignScript.Geometry.Mesh.Sphere.md", "Autodesk.DesignScript.Geometry.Mesh.Translate(vector).md", "Autodesk.DesignScript.Geometry.Mesh.Translate(vector, distance).md", "Autodesk.DesignScript.Geometry.Mesh.Translate(x, y, z).md", "Autodesk.DesignScript.Geometry.Mesh.TriangleCentroids.md", "Autodesk.DesignScript.Geometry.Mesh.TriangleCount.md", "Autodesk.DesignScript.Geometry.Mesh.TriangleNormals.md", "Autodesk.DesignScript.Geometry.Mesh.Triangles.md", "Autodesk.DesignScript.Geometry.Mesh.TrianglesAsNineNumbers.md", "Autodesk.DesignScript.Geometry.Mesh.VertexCount.md", "Autodesk.DesignScript.Geometry.Mesh.VertexIndicesByTri.md", "Autodesk.DesignScript.Geometry.Mesh.VertexNormals.md", "Autodesk.DesignScript.Geometry.Mesh.VertexPositions.md", "Autodesk.DesignScript.Geometry.Mesh.VerticesAsThreeNumbers.md", "Autodesk.DesignScript.Geometry.Mesh.Volume.md", "Autodesk.DesignScript.Geometry.NurbsCurve.ByControlPoints(points).md", "Autodesk.DesignScript.Geometry.NurbsCurve.ByControlPoints(points, degree).md", "Autodesk.DesignScript.Geometry.NurbsCurve.ByControlPoints(points, degree, closeCurve).md", "Autodesk.DesignScript.Geometry.NurbsCurve.ByControlPointsWeightsKnots.md", "Autodesk.DesignScript.Geometry.NurbsCurve.ByPoints(points).md", "Autodesk.DesignScript.Geometry.NurbsCurve.ByPoints(points, closeCurve).md", "Autodesk.DesignScript.Geometry.NurbsCurve.ByPoints(points, degree).md", "Autodesk.DesignScript.Geometry.NurbsCurve.ByPointsTangents.md", "Autodesk.DesignScript.Geometry.NurbsCurve.ControlPoints.md", "Autodesk.DesignScript.Geometry.NurbsCurve.Degree.md", "Autodesk.DesignScript.Geometry.NurbsCurve.IsPeriodic.md", "Autodesk.DesignScript.Geometry.NurbsCurve.IsRational.md", "Autodesk.DesignScript.Geometry.NurbsCurve.Knots.md", "Autodesk.DesignScript.Geometry.NurbsCurve.Weights.md", "Autodesk.DesignScript.Geometry.NurbsSurface.ByControlPoints.md", "Autodesk.DesignScript.Geometry.NurbsSurface.ByControlPointsWeightsKnots.md", "Autodesk.DesignScript.Geometry.NurbsSurface.ByPoints.md", "Autodesk.DesignScript.Geometry.NurbsSurface.ByPointsTangents.md", "Autodesk.DesignScript.Geometry.NurbsSurface.ByPointsTangentsKnotsDerivatives.md", "Autodesk.DesignScript.Geometry.NurbsSurface.ControlPoints.md", "Autodesk.DesignScript.Geometry.NurbsSurface.DegreeU.md", "Autodesk.DesignScript.Geometry.NurbsSurface.DegreeV.md", "Autodesk.DesignScript.Geometry.NurbsSurface.IsPeriodicInU.md", "Autodesk.DesignScript.Geometry.NurbsSurface.IsPeriodicInV.md", "Autodesk.DesignScript.Geometry.NurbsSurface.IsRational.md", "Autodesk.DesignScript.Geometry.NurbsSurface.NumControlPointsU.md", "Autodesk.DesignScript.Geometry.NurbsSurface.NumControlPointsV.md", "Autodesk.DesignScript.Geometry.NurbsSurface.UKnots.md", "Autodesk.DesignScript.Geometry.NurbsSurface.VKnots.md", "Autodesk.DesignScript.Geometry.NurbsSurface.Weights.md", "Autodesk.DesignScript.Geometry.PanelSurface.ByCrossSplitSquares.md", "Autodesk.DesignScript.Geometry.PanelSurface.ByCustomOrthogonalLattice.md", "Autodesk.DesignScript.Geometry.PanelSurface.ByDiagonallySplitSquares.md", "Autodesk.DesignScript.Geometry.PanelSurface.ByDiamonds.md", "Autodesk.DesignScript.Geometry.PanelSurface.ByHexagons.md", "Autodesk.DesignScript.Geometry.PanelSurface.ByParallelograms.md", "Autodesk.DesignScript.Geometry.PanelSurface.ByQuads.md", "Autodesk.DesignScript.Geometry.PanelSurface.ByRhombiTriHexagonals.md", "Autodesk.DesignScript.Geometry.PanelSurface.BySplitDiamonds.md", "Autodesk.DesignScript.Geometry.PanelSurface.ByStaggeredQuads.md", "Autodesk.DesignScript.Geometry.PanelSurface.GetNumPanelVertices.md", "Autodesk.DesignScript.Geometry.PanelSurface.GetPanelPoints.md", "Autodesk.DesignScript.Geometry.PanelSurface.GetPanelPolygon.md", "Autodesk.DesignScript.Geometry.PanelSurface.GetPanelVertices.md", "Autodesk.DesignScript.Geometry.PanelSurface.GetPoint.md", "Autodesk.DesignScript.Geometry.PanelSurface.GetVertex.md", "Autodesk.DesignScript.Geometry.PanelSurface.GetVertexIndex.md", "Autodesk.DesignScript.Geometry.PanelSurface.NumPanels.md", "Autodesk.DesignScript.Geometry.PanelSurface.NumVertices.md", "Autodesk.DesignScript.Geometry.PanelSurface.SetTransform.md", "Autodesk.DesignScript.Geometry.Plane.ByBestFitThroughPoints.md", "Autodesk.DesignScript.Geometry.Plane.ByLineAndPoint.md", "Autodesk.DesignScript.Geometry.Plane.ByOriginNormal.md", "Autodesk.DesignScript.Geometry.Plane.ByOriginNormalXAxis.md", "Autodesk.DesignScript.Geometry.Plane.ByOriginXAxisYAxis.md", "Autodesk.DesignScript.Geometry.Plane.ByThreePoints.md", "Autodesk.DesignScript.Geometry.Plane.Normal.md", "Autodesk.DesignScript.Geometry.Plane.Offset.md", "Autodesk.DesignScript.Geometry.Plane.Origin.md", "Autodesk.DesignScript.Geometry.Plane.ToCoordinateSystem.md", "Autodesk.DesignScript.Geometry.Plane.XAxis.md", "Autodesk.DesignScript.Geometry.Plane.XY.md", "Autodesk.DesignScript.Geometry.Plane.XZ.md", "Autodesk.DesignScript.Geometry.Plane.YAxis.md", "Autodesk.DesignScript.Geometry.Plane.YZ.md", "Autodesk.DesignScript.Geometry.Point.Add.md", "Autodesk.DesignScript.Geometry.Point.AsVector.md", "Autodesk.DesignScript.Geometry.Point.ByCartesianCoordinates.md", "Autodesk.DesignScript.Geometry.Point.ByCoordinates(x, y).md", "Autodesk.DesignScript.Geometry.Point.ByCoordinates(x, y, z).md", "Autodesk.DesignScript.Geometry.Point.ByCylindricalCoordinates.md", "Autodesk.DesignScript.Geometry.Point.BySphericalCoordinates.md", "Autodesk.DesignScript.Geometry.Point.Origin.md", "Autodesk.DesignScript.Geometry.Point.Project.md", "Autodesk.DesignScript.Geometry.Point.PruneDuplicates.md", "Autodesk.DesignScript.Geometry.Point.Subtract.md", "Autodesk.DesignScript.Geometry.Point.X.md", "Autodesk.DesignScript.Geometry.Point.Y.md", "Autodesk.DesignScript.Geometry.Point.Z.md", "Autodesk.DesignScript.Geometry.PolyCurve.BasePlane.md", "Autodesk.DesignScript.Geometry.PolyCurve.ByGroupedCurves.md", "Autodesk.DesignScript.Geometry.PolyCurve.ByJoinedCurves.md", "Autodesk.DesignScript.Geometry.PolyCurve.ByPoints.md", "Autodesk.DesignScript.Geometry.PolyCurve.ByThickeningCurveNormal.md", "Autodesk.DesignScript.Geometry.PolyCurve.CloseWithLine.md", "Autodesk.DesignScript.Geometry.PolyCurve.CloseWithLineAndTangentArcs.md", "Autodesk.DesignScript.Geometry.PolyCurve.CurveAtIndex.md", "Autodesk.DesignScript.Geometry.PolyCurve.Curves.md", "Autodesk.DesignScript.Geometry.PolyCurve.ExtendWithArc.md", "Autodesk.DesignScript.Geometry.PolyCurve.ExtendWithEllipse.md", "Autodesk.DesignScript.Geometry.PolyCurve.Fillet.md", "Autodesk.DesignScript.Geometry.PolyCurve.Heal.md", "Autodesk.DesignScript.Geometry.PolyCurve.NumberOfCurves.md", "Autodesk.DesignScript.Geometry.PolyCurve.OffsetMany.md", "Autodesk.DesignScript.Geometry.PolyCurve.Points.md", "Autodesk.DesignScript.Geometry.Polygon.ByPoints.md", "Autodesk.DesignScript.Geometry.Polygon.Center.md", "Autodesk.DesignScript.Geometry.Polygon.ContainmentTest.md", "Autodesk.DesignScript.Geometry.Polygon.Corners.md", "Autodesk.DesignScript.Geometry.Polygon.PlaneDeviation.md", "Autodesk.DesignScript.Geometry.Polygon.RegularPolygon.md", "Autodesk.DesignScript.Geometry.Polygon.SelfIntersections.md", "Autodesk.DesignScript.Geometry.PolySurface.ByJoinedSurfaces.md", "Autodesk.DesignScript.Geometry.PolySurface.ByLoft(crossSections).md", "Autodesk.DesignScript.Geometry.PolySurface.ByLoft(crossSections, guideCurve).md", "Autodesk.DesignScript.Geometry.PolySurface.ByLoftGuides.md", "Autodesk.DesignScript.Geometry.PolySurface.BySolid.md", "Autodesk.DesignScript.Geometry.PolySurface.BySweep.md", "Autodesk.DesignScript.Geometry.PolySurface.Chamfer.md", "Autodesk.DesignScript.Geometry.PolySurface.EdgeCount.md", "Autodesk.DesignScript.Geometry.PolySurface.ExtractSolids.md", "Autodesk.DesignScript.Geometry.PolySurface.Fillet.md", "Autodesk.DesignScript.Geometry.PolySurface.LocateSurfacesByLine.md", "Autodesk.DesignScript.Geometry.PolySurface.LocateSurfacesByPoint.md", "Autodesk.DesignScript.Geometry.PolySurface.SurfaceCount.md", "Autodesk.DesignScript.Geometry.PolySurface.Surfaces.md", "Autodesk.DesignScript.Geometry.PolySurface.UnconnectedBoundaries.md", "Autodesk.DesignScript.Geometry.PolySurface.VertexCount.md", "Autodesk.DesignScript.Geometry.Rectangle.ByCornerPoints(p1, p2, p3, p4).md", "Autodesk.DesignScript.Geometry.Rectangle.ByCornerPoints(points).md", "Autodesk.DesignScript.Geometry.Rectangle.ByWidthLength(coordinateSystem, width, length).md", "Autodesk.DesignScript.Geometry.Rectangle.ByWidthLength(plane, width, length).md", "Autodesk.DesignScript.Geometry.Rectangle.ByWidthLength(width, length).md", "Autodesk.DesignScript.Geometry.Rectangle.Height.md", "Autodesk.DesignScript.Geometry.Rectangle.Width.md", "Autodesk.DesignScript.Geometry.Solid.Area.md", "Autodesk.DesignScript.Geometry.Solid.ByJoinedSurfaces.md", "Autodesk.DesignScript.Geometry.Solid.ByLoft(crossSections).md", "Autodesk.DesignScript.Geometry.Solid.ByLoft(crossSections, guideCurves).md", "Autodesk.DesignScript.Geometry.Solid.ByRevolve.md", "Autodesk.DesignScript.Geometry.Solid.ByRuledLoft.md", "Autodesk.DesignScript.Geometry.Solid.BySweep.md", "Autodesk.DesignScript.Geometry.Solid.BySweep2Rails.md", "Autodesk.DesignScript.Geometry.Solid.ByUnion.md", "Autodesk.DesignScript.Geometry.Solid.Centroid.md", "Autodesk.DesignScript.Geometry.Solid.Chamfer.md", "Autodesk.DesignScript.Geometry.Solid.Difference.md", "Autodesk.DesignScript.Geometry.Solid.DifferenceAll.md", "Autodesk.DesignScript.Geometry.Solid.Fillet.md", "Autodesk.DesignScript.Geometry.Solid.ProjectInputOnto.md", "Autodesk.DesignScript.Geometry.Solid.Repair.md", "Autodesk.DesignScript.Geometry.Solid.Separate.md", "Autodesk.DesignScript.Geometry.Solid.ThinShell.md", "Autodesk.DesignScript.Geometry.Solid.Union.md", "Autodesk.DesignScript.Geometry.Solid.Volume.md", "Autodesk.DesignScript.Geometry.Sphere.ByBestFit.md", "Autodesk.DesignScript.Geometry.Sphere.ByCenterPointRadius.md", "Autodesk.DesignScript.Geometry.Sphere.ByFourPoints.md", "Autodesk.DesignScript.Geometry.Sphere.CenterPoint.md", "Autodesk.DesignScript.Geometry.Sphere.Radius.md", "Autodesk.DesignScript.Geometry.Surface.ApproximateWithTolerance.md", "Autodesk.DesignScript.Geometry.Surface.Area.md", "Autodesk.DesignScript.Geometry.Surface.ByLoft(crossSections).md", "Autodesk.DesignScript.Geometry.Surface.ByLoft(crossSections, guideCurves).md", "Autodesk.DesignScript.Geometry.Surface.ByPatch.md", "Autodesk.DesignScript.Geometry.Surface.ByPerimeterPoints.md", "Autodesk.DesignScript.Geometry.Surface.ByRevolve.md", "Autodesk.DesignScript.Geometry.Surface.ByRuledLoft.md", "Autodesk.DesignScript.Geometry.Surface.BySweep.md", "Autodesk.DesignScript.Geometry.Surface.BySweep2Rails.md", "Autodesk.DesignScript.Geometry.Surface.ByUnion.md", "Autodesk.DesignScript.Geometry.Surface.Closed.md", "Autodesk.DesignScript.Geometry.Surface.ClosedInU.md", "Autodesk.DesignScript.Geometry.Surface.ClosedInV.md", "Autodesk.DesignScript.Geometry.Surface.CoordinateSystemAtParameter.md", "Autodesk.DesignScript.Geometry.Surface.CurvatureAtParameter.md", "Autodesk.DesignScript.Geometry.Surface.DerivativesAtParameter.md", "Autodesk.DesignScript.Geometry.Surface.Difference.md", "Autodesk.DesignScript.Geometry.Surface.FlipNormalDirection.md", "Autodesk.DesignScript.Geometry.Surface.GaussianCurvatureAtParameter.md", "Autodesk.DesignScript.Geometry.Surface.GetIsoline.md", "Autodesk.DesignScript.Geometry.Surface.NormalAtParameter.md", "Autodesk.DesignScript.Geometry.Surface.NormalAtPoint.md", "Autodesk.DesignScript.Geometry.Surface.Offset.md", "Autodesk.DesignScript.Geometry.Surface.Perimeter.md", "Autodesk.DesignScript.Geometry.Surface.PerimeterCurves.md", "Autodesk.DesignScript.Geometry.Surface.PointAtParameter.md", "Autodesk.DesignScript.Geometry.Surface.PrincipalCurvaturesAtParameter.md", "Autodesk.DesignScript.Geometry.Surface.PrincipalDirectionsAtParameter.md", "Autodesk.DesignScript.Geometry.Surface.ProjectInputOnto.md", "Autodesk.DesignScript.Geometry.Surface.Repair.md", "Autodesk.DesignScript.Geometry.Surface.SubtractFrom.md", "Autodesk.DesignScript.Geometry.Surface.TangentAtUParameter.md", "Autodesk.DesignScript.Geometry.Surface.TangentAtVParameter.md", "Autodesk.DesignScript.Geometry.Surface.Thicken(thickness).md", "Autodesk.DesignScript.Geometry.Surface.Thicken(thickness, both_sides).md", "Autodesk.DesignScript.Geometry.Surface.ToNurbsSurface.md", "Autodesk.DesignScript.Geometry.Surface.TrimWithEdgeLoops.md", "Autodesk.DesignScript.Geometry.Surface.UVParameterAtPoint.md", "Autodesk.DesignScript.Geometry.Topology.Edges.md", "Autodesk.DesignScript.Geometry.Topology.Faces.md", "Autodesk.DesignScript.Geometry.Topology.Vertices.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineEdge.Index.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineEdge.Info.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineEdge.IsBorder.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineEdge.IsManifold.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineEdge.UVNFrame.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineFace.Index.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineFace.Info.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineFace.Sides.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineFace.UVNFrame.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineFace.Valence.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineInitialSymmetry.ByAxial.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineInitialSymmetry.ByRadial.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineInitialSymmetry.IsRadial.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineInitialSymmetry.RadialSymmetryFaces.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineInitialSymmetry.XAxis.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineInitialSymmetry.YAxis.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineInitialSymmetry.ZAxis.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineReflection.Axis.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineReflection.ByAxial.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineReflection.ByRadial.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineReflection.IsRadial.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineReflection.Plane.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineReflection.SegmentAngle.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineReflection.SegmentsCount.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.AddReflections.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.BevelEdges.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.BridgeEdgesToEdges.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.BridgeEdgesToFaces.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.BridgeFacesToEdges.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.BridgeFacesToFaces.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.BuildFromLines.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.BuildPipes.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByBoxCorners.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByBoxLengths(cs, width, length, height, xSpans, ySpans, zSpans, symmetry, inSmoothMode).md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByBoxLengths(origin, width, length, height, xSpans, ySpans, zSpans, symmetry, inSmoothMode).md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByBoxLengths(width, length, height, xSpans, ySpans, zSpans, symmetry, inSmoothMode).md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByCombinedTSplineSurfaces.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByConeCoordinateSystemHeightRadii.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByConeCoordinateSystemHeightRadius.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByConePointsRadii.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByConePointsRadius.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByCylinderPointsRadius.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByCylinderRadiusHeight.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByExtrude.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByNurbsSurfaceCurvature.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByNurbsSurfaceUniform.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByPlaneBestFitThroughPoints.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByPlaneLineAndPoint.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByPlaneOriginNormal.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByPlaneOriginNormalXAxis.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByPlaneOriginXAxisYAxis.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByPlaneThreePoints.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByQuadballCenterRadius.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByQuadballCoordinateSystemRadius.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByRevolve.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.BySphereBestFit.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.BySphereCenterPointRadius.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.BySphereFourPoints.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.BySweep.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByTorusCenterRadii.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ByTorusCoordinateSystemRadii.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.CompressIndexes.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.CreaseEdges.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.CreaseVertices.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.CreateMatch(tsEdges, brepEdges, continuity, useArclength, useRefinement, numRefinementSteps, refinementTolerance, usePropagation, widthOfPropagation, scale, flipSourceTargetAlignment).md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.CreateMatch(tsEdges, curves, continuity, useArclength, useRefinement, numRefinementSteps, refinementTolerance, usePropagation, widthOfPropagation, scale, flipSourceTargetAlignment).md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.DeleteEdges.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.DeleteFaces.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.DeleteVertices.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.DeserializeFromTSM.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.DuplicateFaces.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.EnableSmoothMode.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ExportToTSM.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ExportToTSS.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ExtrudeEdges.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ExtrudeEdgesAlongCurve.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ExtrudeFaces.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ExtrudeFacesAlongCurve.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.FillHole.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.FlattenVertices(vertices).md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.FlattenVertices(vertices, parallelPlane).md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.FlipNormals.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ImportFromTSM(file, inSmoothMode).md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ImportFromTSM(filePath, inSmoothMode).md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ImportFromTSS(file, inSmoothMode).md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ImportFromTSS(filePath, inSmoothMode).md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.Interpolate.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.IsClosed.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.IsExtractable.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.IsInBoxMode.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.IsStandard.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.IsWaterTight.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.MakeUniform.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.MergeEdges.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.MoveVertices.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.PullVertices.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.Reflections.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.RemoveReflections.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.Repair.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.SerializeAsTSM.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.SlideEdges.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.Standardize.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.SubdivideFaces.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.Thicken(distance, softEdges).md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.Thicken(vector, softEdges).md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ToBRep.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.ToMesh.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.UncreaseEdges.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.UncreaseVertices.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.UnweldEdges.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.UnweldVertices.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.WeldCoincidentVertices.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.WeldVertices(firstGroup, secondGroup, keepSubdCreases).md", "Autodesk.DesignScript.Geometry.TSpline.TSplineSurface.WeldVertices(vertices, newPosition, keepSubdCreases).md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.BorderEdges.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.BorderFaces.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.BorderVertices.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.DecomposedEdges.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.DecomposedFaces.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.DecomposedVertices.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.EdgeByIndex.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.EdgesCount.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.FaceByIndex.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.FacesCount.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerEdges.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerFaces.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.NGonFaces.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.NonManifoldEdges.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.NonManifoldVertices.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.RegularFaces.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.RegularVertices.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.StarPointVertices.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.TPointVertices.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.VertexByIndex.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.VerticesCount.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineUVNFrame.Normal.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineUVNFrame.Position.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineUVNFrame.U.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineUVNFrame.V.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineVertex.FunctionalValence.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineVertex.Index.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineVertex.Info.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineVertex.IsManifold.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineVertex.IsStarPoint.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineVertex.IsTPoint.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineVertex.UVNFrame.md", "Autodesk.DesignScript.Geometry.TSpline.TSplineVertex.Valence.md", "Autodesk.DesignScript.Geometry.UV.ByCoordinates.md", "Autodesk.DesignScript.Geometry.UV.U.md", "Autodesk.DesignScript.Geometry.UV.V.md", "Autodesk.DesignScript.Geometry.Vector.Add.md", "Autodesk.DesignScript.Geometry.Vector.AngleAboutAxis.md", "Autodesk.DesignScript.Geometry.Vector.AngleWithVector.md", "Autodesk.DesignScript.Geometry.Vector.AsPoint.md", "Autodesk.DesignScript.Geometry.Vector.ByCoordinates(x, y, z).md", "Autodesk.DesignScript.Geometry.Vector.ByCoordinates(x, y, z, normalized).md", "Autodesk.DesignScript.Geometry.Vector.ByTwoPoints.md", "Autodesk.DesignScript.Geometry.Vector.Cross.md", "Autodesk.DesignScript.Geometry.Vector.Dot.md", "Autodesk.DesignScript.Geometry.Vector.IsAlmostEqualTo.md", "Autodesk.DesignScript.Geometry.Vector.IsParallel.md", "Autodesk.DesignScript.Geometry.Vector.Length.md", "Autodesk.DesignScript.Geometry.Vector.Normalized.md", "Autodesk.DesignScript.Geometry.Vector.Reverse.md", "Autodesk.DesignScript.Geometry.Vector.Rotate(axis, degrees).md", "Autodesk.DesignScript.Geometry.Vector.Rotate(plane, degrees).md", "Autodesk.DesignScript.Geometry.Vector.Scale(scale_factor).md", "Autodesk.DesignScript.Geometry.Vector.Scale(xScaleFactor, yScaleFactor, zScaleFactor).md", "Autodesk.DesignScript.Geometry.Vector.Subtract.md", "Autodesk.DesignScript.Geometry.Vector.Transform.md", "Autodesk.DesignScript.Geometry.Vector.X.md", "Autodesk.DesignScript.Geometry.Vector.XAxis.md", "Autodesk.DesignScript.Geometry.Vector.Y.md", "Autodesk.DesignScript.Geometry.Vector.YAxis.md", "Autodesk.DesignScript.Geometry.Vector.Z.md", "Autodesk.DesignScript.Geometry.Vector.ZAxis.md", "Autodesk.DesignScript.Geometry.Vertex.AdjacentEdges.md", "Autodesk.DesignScript.Geometry.Vertex.AdjacentFaces.md", "Autodesk.DesignScript.Geometry.Vertex.PointGeometry.md", "CoreNodeModels.ColorRange.md", "CoreNodeModels.CreateList.md", "CoreNodeModels.DefineData.md", "CoreNodeModels.Equals.md", "CoreNodeModels.FormattedStringFromArray.md", "CoreNodeModels.FormattedStringFromObject.md", "CoreNodeModels.FromArray.md", "CoreNodeModels.FromObject.md", "CoreNodeModels.HigherOrder.ApplyFunction.md", "CoreNodeModels.HigherOrder.CartesianProduct.md", "CoreNodeModels.HigherOrder.Combine.md", "CoreNodeModels.HigherOrder.ComposeFunctions.md", "CoreNodeModels.HigherOrder.Filter.md", "CoreNodeModels.HigherOrder.LaceLongest.md", "CoreNodeModels.HigherOrder.LaceShortest.md", "CoreNodeModels.HigherOrder.Map.md", "CoreNodeModels.HigherOrder.Reduce.md", "CoreNodeModels.HigherOrder.Replace.md", "CoreNodeModels.HigherOrder.ScanList.md", "CoreNodeModels.Input.BoolSelector.md", "CoreNodeModels.Input.ColorPalette.md", "CoreNodeModels.Input.CustomSelection.md", "CoreNodeModels.Input.DateTime.md", "CoreNodeModels.Input.Directory.md", "CoreNodeModels.Input.DirectoryObject.md", "CoreNodeModels.Input.DoubleInput.md", "CoreNodeModels.Input.DoubleSlider.md", "CoreNodeModels.Input.Filename.md", "CoreNodeModels.Input.FileObject.md", "CoreNodeModels.Input.IntegerSlider64Bit.md", "CoreNodeModels.Input.StringInput.md", "CoreNodeModels.Logic.And.md", "CoreNodeModels.Logic.Gate.md", "CoreNodeModels.Logic.Or.md", "CoreNodeModels.Logic.RefactoredIf.md", "CoreNodeModels.Logic.ScopedIf.md", "CoreNodeModels.Range.md", "CoreNodeModels.Remember.md", "CoreNodeModels.Sequence.md", "CoreNodeModels.Watch.md", "CoreNodeModels.WatchImageCore.md", "CoreNodeModels.WebRequest.md", "DesignScript.Builtin.Dictionary.ByKeysValues.md", "DesignScript.Builtin.Dictionary.Components.md", "DesignScript.Builtin.Dictionary.Count.md", "DesignScript.Builtin.Dictionary.Keys.md", "DesignScript.Builtin.Dictionary.RemoveKeys.md", "DesignScript.Builtin.Dictionary.SetValueAtKeys.md", "DesignScript.Builtin.Dictionary.ValueAtKey.md", "DesignScript.Builtin.Dictionary.Values.md", "DSOffice.Data.ExportCSV.md", "DSOffice.Data.ImportCSV.md", "DSOffice.Data.OpenXMLExportExcel.md", "DSOffice.Data.OpenXMLImportExcel.md", "DynamoUnits.Location.ByLatitudeAndLongitude.md", "DynamoUnits.Location.Latitude.md", "DynamoUnits.Location.Longitude.md", "DynamoUnits.Location.Name.md", "DynamoUnits.Quantity.ByTypeID.md", "DynamoUnits.Quantity.Name.md", "DynamoUnits.Quantity.TypeId.md", "DynamoUnits.Quantity.Units.md", "DynamoUnits.Symbol.ByTypeID.md", "DynamoUnits.Symbol.Space.md", "DynamoUnits.Symbol.StringifyDecimal.md", "DynamoUnits.Symbol.StringifyFraction.md", "DynamoUnits.Symbol.SymbolsByUnit.md", "DynamoUnits.Symbol.Text.md", "DynamoUnits.Symbol.TypeId.md", "DynamoUnits.Symbol.Unit.md", "DynamoUnits.Unit.AreUnitsConvertible.md", "DynamoUnits.Unit.ByTypeID.md", "DynamoUnits.Unit.ConvertibleUnits.md", "DynamoUnits.Unit.Name.md", "DynamoUnits.Unit.QuantitiesContainingUnit.md", "DynamoUnits.Unit.TypeId.md", "DynamoUnits.Utilities.ConvertByUnits.md", "DynamoUnits.Utilities.ParseExpression.md", "DynamoUnits.Utilities.ParseExpressionByUnit.md", "GeometryUI.DeserializeFromSABWithUnits.md", "GeometryUI.ExportWithUnits.md", "GeometryUI.ImportFromSATWithUnits.md", "GeometryUI.PanelSurfaceBoundaryConditionDropDown.md", "List.Equals.md", "List.GroupByFunction.md", "List.MaximumItemByKey.md", "List.MinimumItemByKey.md", "List.Rank.md", "List.RemoveIfNot.md", "List.SortByFunction.md", "List.TrueForAll.md", "List.TrueForAny.md", "LoopWhile.md", "Modifiers.GeometryColor.ByGeometryColor.md", "Modifiers.GeometryColor.ByMeshColors.md", "Modifiers.GeometryColor.BySurfaceColors.md", "PythonNodeModels.PythonNode.md", "PythonNodeModels.PythonStringNode.md", "Tessellation.ConvexHull.ByPoints.md", "Tessellation.Delaunay.ByParametersOnSurface.md", "Tessellation.Delaunay.ByPoints.md", "Tessellation.Voronoi.ByParametersOnSurface.md", "UnitsUI.DynamoUnitConvert.md", "UnitsUI.Quantities.md", "UnitsUI.Symbols.md", "UnitsUI.UnitInput.md", "UnitsUI.Units.md" };



Maybe you dont have to include "Autodesk.DesignScript.Geometry.DebugTools.DisableAsmJournaling.md", "Autodesk.DesignScript.Geometry.DebugTools.EnableAsmJournaling.md", as part of the list?

When testing in my local environment I got 756 md files including those two one that's why I included them, not sure about which nodes they refer.
My only guess about why that test is failing could be related to the decoration added in src/Libraries/DSOffice/Excel.cs file, probably is if they are decorated with [NodeObsolete("ExcelInteropObsoleteNode", typeof(Properties.Resources))] the md file is not generated but not sure.

Checking if [NodeObsolete("ExcelInteropObsoleteNode", typeof(Properties.Resources))] produce ProducesCorrectOutputFromCoreDirectory_preloadedbinaries() test to fail due that no md files were generated.

This reverts commit 34464c9.

This reverts commit 933a009.

2 commits were reverted (they were used to get more info about why the test was failing). In the ProducesCorrectOutputFromCoreDirectory_preloadedbinaries() test the generated md files were reduced from 756 to 754 due that 2 excel nodes were obsoleted with a warning message so the md files are not generated for those 2 nodes.

RobertGlobant20 · 2025-01-10T01:36:24Z

@QilongTang passed in DYN-DevCI_Self_Service job but got different errors in DynamoSelfServe job
https://master-15.jenkins.autodesk.com/view/DYN/job/DYN-DevCI_Self_Service/1461/

RobertGlobant20 · 2025-01-10T20:14:01Z

@QilongTang passed in DYN-DevCI_Self_Service job again then I think we are good to merge.
https://master-15.jenkins.autodesk.com/view/DYN/job/DYN-DevCI_Self_Service/1462/

RobertGlobant20 requested a review from QilongTang January 6, 2025 23:18

github-actions bot reviewed Jan 6, 2025

View reviewed changes

QilongTang added this to the 3.5 milestone Jan 7, 2025

mjkkirschner reviewed Jan 8, 2025

View reviewed changes

test/Libraries/DynamoMSOfficeTests/ExcelTests.cs Outdated Show resolved Hide resolved

RobertGlobant20 added 2 commits January 8, 2025 10:51

DYN-7963 Obsolote Excel Interop Node - Code Review

e4af9e6

I've updated the Category to contains ExcelTest and also the new Category ExcelTestInterop. Also there was one test using the decorator Obsolete so I removed that decorator due that is not well tested.

DYN-7963 Obsolote Excel Interop Node - Code Review

2ae7411

Adding decorator to missing excel test

QilongTang approved these changes Jan 8, 2025

View reviewed changes

DYN-7963 Obsolote Excel Interop Node - Regression

933a009

Adding more info to the ProducesCorrectOutputFromCoreDirectory_preloadedbinaries() test so we know which md files are missing. THIS CHANGE WILL BE REVERTED, LATER

QilongTang reviewed Jan 9, 2025

View reviewed changes

RobertGlobant20 added 4 commits January 9, 2025 17:08

DYN-7963 Obsolote Excel Interop Node - Regression

34464c9

Checking if [NodeObsolete("ExcelInteropObsoleteNode", typeof(Properties.Resources))] produce ProducesCorrectOutputFromCoreDirectory_preloadedbinaries() test to fail due that no md files were generated.

Revert "DYN-7963 Obsolote Excel Interop Node - Regression"

037a06c

This reverts commit 34464c9.

Revert "DYN-7963 Obsolote Excel Interop Node - Regression"

9e7da22

This reverts commit 933a009.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

DYN-7963 Obsolote Excel Interop Nodes #15743

DYN-7963 Obsolote Excel Interop Nodes #15743

RobertGlobant20 commented Jan 6, 2025

github-actions bot left a comment

github-actions bot commented Jan 6, 2025 •

edited

Loading

QilongTang commented Jan 7, 2025 •

edited

Loading

RobertGlobant20 commented Jan 7, 2025

RobertGlobant20 commented Jan 7, 2025

QilongTang commented Jan 7, 2025 •

edited

Loading

mjkkirschner Jan 8, 2025

RobertGlobant20 Jan 8, 2025

RobertGlobant20 commented Jan 8, 2025

QilongTang commented Jan 8, 2025 •

edited

Loading

RobertGlobant20 commented Jan 8, 2025

QilongTang commented Jan 8, 2025 •

edited

Loading

RobertGlobant20 commented Jan 8, 2025

QilongTang commented Jan 9, 2025

RobertGlobant20 commented Jan 9, 2025

QilongTang commented Jan 9, 2025

QilongTang Jan 9, 2025

RobertGlobant20 Jan 9, 2025

RobertGlobant20 commented Jan 10, 2025

RobertGlobant20 commented Jan 10, 2025

DYN-7963 Obsolote Excel Interop Nodes #15743

Are you sure you want to change the base?

DYN-7963 Obsolote Excel Interop Nodes #15743

Conversation

RobertGlobant20 commented Jan 6, 2025

Purpose

Declarations

Release Notes

Reviewers

FYIs

github-actions bot left a comment

Choose a reason for hiding this comment

github-actions bot commented Jan 6, 2025 • edited Loading

UI Smoke Tests

QilongTang commented Jan 7, 2025 • edited Loading

RobertGlobant20 commented Jan 7, 2025

RobertGlobant20 commented Jan 7, 2025

QilongTang commented Jan 7, 2025 • edited Loading

mjkkirschner Jan 8, 2025

Choose a reason for hiding this comment

RobertGlobant20 Jan 8, 2025

Choose a reason for hiding this comment

RobertGlobant20 commented Jan 8, 2025

QilongTang commented Jan 8, 2025 • edited Loading

RobertGlobant20 commented Jan 8, 2025

QilongTang commented Jan 8, 2025 • edited Loading

RobertGlobant20 commented Jan 8, 2025

QilongTang commented Jan 9, 2025

RobertGlobant20 commented Jan 9, 2025

QilongTang commented Jan 9, 2025

QilongTang Jan 9, 2025

Choose a reason for hiding this comment

RobertGlobant20 Jan 9, 2025

Choose a reason for hiding this comment

RobertGlobant20 commented Jan 10, 2025

RobertGlobant20 commented Jan 10, 2025

github-actions bot commented Jan 6, 2025 •

edited

Loading

QilongTang commented Jan 7, 2025 •

edited

Loading

QilongTang commented Jan 7, 2025 •

edited

Loading

QilongTang commented Jan 8, 2025 •

edited

Loading

QilongTang commented Jan 8, 2025 •

edited

Loading