Update from base #4

Esteban-Rocha · 2017-11-08T16:56:50Z

No description provided.

This reverts commit 8a97712. This commit added a call to sysfs_notify() from within scsi_device_set_state(), which in turn turns out to make libata very unhappy, because ata_eh_detach_dev() does spin_lock_irqsave(ap->lock, flags); .. if (ata_scsi_offline_dev(dev)) { dev->flags |= ATA_DFLAG_DETACHED; ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; } and ata_scsi_offline_dev() then does that scsi_device_set_state() to set it offline. So now we called sysfs_notify() from within a spinlocked region, which really doesn't work. The 0day robot reported this as: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238 because sysfs_notify() ends up calling kernfs_find_and_get_ns() which then does mutex_lock(&kernfs_mutex).. The pollability of the device state isn't critical, so revert this all for now, and maybe we'll do it differently in the future. Reported-by: Fengguang Wu <[email protected]> Acked-by: Tejun Heo <[email protected]> Acked-by: Martin K. Petersen <[email protected]> Acked-by: Hannes Reinecke <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

…ully The 0day bot reports the below failure which happens occasionally, with their randconfig testing (once every ~100 boots). The Code points at the private pointer ->driver_data being NULL, which hints at a race of sorts where the private driver_data descriptor has disappeared by the time we get to run the workqueue. So let's check that pointer before we continue with issuing the command to the drive. This fix is of the brown paper bag nature but considering that IDE is long deprecated, let's do that so that random testing which happens to enable CONFIG_IDE during randconfig builds, doesn't fail because of this. Besides, failing the TEST_UNIT_READY command because the drive private data is gone is something which we could simply do anyway, to denote that there was a problem communicating with the device. BUG: unable to handle kernel NULL pointer dereference at 000001c0 IP: cdrom_check_status *pde = 00000000 Oops: 0000 [#1] SMP CPU: 1 PID: 155 Comm: kworker/1:2 Not tainted 4.14.0-rc8 #127 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Workqueue: events_freezable_power_ disk_events_workfn task: 4fe90980 task.stack: 507ac000 EIP: cdrom_check_status+0x2c/0x90 EFLAGS: 00210246 CPU: 1 EAX: 00000000 EBX: 4fefec00 ECX: 00000000 EDX: 00000000 ESI: 00000003 EDI: ffffffff EBP: 467a9340 ESP: 507aded0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 80050033 CR2: 000001c0 CR3: 06e0f000 CR4: 00000690 Call Trace: ? ide_cdrom_check_events_real ? cdrom_check_events ? disk_check_events ? process_one_work ? process_one_work ? worker_thread ? kthread ? process_one_work ? __kthread_create_on_node ? ret_from_fork Code: 53 83 ec 14 89 c3 89 d1 be 03 00 00 00 65 a1 14 00 00 00 89 44 24 10 31 c0 8b 43 18 c7 44 24 04 00 00 00 00 c7 04 24 00 00 00 00 <8a> 80 c0 01 00 00 c7 44 24 08 00 00 00 00 83 e0 03 c7 44 24 0c EIP: cdrom_check_status+0x2c/0x90 SS:ESP: 0068:507aded0 CR2: 00000000000001c0 ---[ end trace 2410e586dd8f88b2 ]--- Reported-and-tested-by: Fengguang Wu <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Bart Van Assche <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

This reverts commit 5b72505. The rtc block on i.MX53 is a completely different hardware than the one found on i.MX25. Cc: <[email protected]> #4.14 Reported-by: Noel Vellemans <[email protected]> Suggested-by: Juergen Borleis <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>

Hendrik Brueckner says: ==================== Perf tool bpf selftests revealed a broken uapi for s390 and arm64. With the BPF_PROG_TYPE_PERF_EVENT program type the bpf_perf_event structure exports the pt_regs structure for all architectures. This fails for s390 and arm64 because pt_regs are not part of the user api and kept in-kernel only. To mitigate the broken uapi, introduce a wrapper that exports pt_regs in an asm-generic way. For arm64, export the exising user_pt_regs structure. For s390, introduce a user_pt_regs structure that exports the beginning of pt_regs. Note that user_pt_regs must export from the beginning of pt_regs as BPF_PROG_TYPE_PERF_EVENT program type is not the only type for running BPF programs. Some more background: For the bpf_perf_event, there is a uapi definition that is passed to the BPF program. For other "probe" points like trace points, kprobes, and uprobes, there is no uapi and the BPF program is always passed pt_regs (which is OK as the BPF program runs in the kernel context). The perf tool can attach BPF programs to all of these "probe" points and, optionally, can create a BPF prologue to access particular arguments (passed as registers). For this, it uses DWARF/CFI information to obtain the register and calls a perf-arch backend function, regs_query_register_offset(). This function returns the index into (user_)pt_regs for a particular register. Then, perf creates a BPF prologue that accesses this register based on the passed stucture from the "probe" point. Part of this series, are also updates to the testing and bpf selftest to deal with asm-specifics. To complete the bpf support in perf, the the regs_query_register_offset function is added for s390 to support BPF prologue creation. Changelog v1 -> v2: - Correct kbuild test bot issues by including asm-generic/bpf_perf_event.h for archictectures that do not have their own asm version. - Added patch to clean-up whitespace and coding style issues in s390 asm/ptrace.h (#4/6) as suggested by Alexei. ==================== Signed-off-by: Daniel Borkmann <[email protected]>

We don't need struct_mutex to initialise userptr (it just allocates a workqueue for itself etc), but we do need struct_mutex later on in i915_gem_init() in order to feed requests onto the HW. This should break the chain [ 385.697902] ====================================================== [ 385.697907] WARNING: possible circular locking dependency detected [ 385.697913] 4.14.0-CI-Patchwork_7234+ #1 Tainted: G U [ 385.697917] ------------------------------------------------------ [ 385.697922] perf_pmu/2631 is trying to acquire lock: [ 385.697927] (&mm->mmap_sem){++++}, at: [<ffffffff811bfe1e>] __might_fault+0x3e/0x90 [ 385.697941] but task is already holding lock: [ 385.697946] (&cpuctx_mutex){+.+.}, at: [<ffffffff8116fe8c>] perf_event_ctx_lock_nested+0xbc/0x1d0 [ 385.697957] which lock already depends on the new lock. [ 385.697963] the existing dependency chain (in reverse order) is: [ 385.697970] -> #4 (&cpuctx_mutex){+.+.}: [ 385.697980] __mutex_lock+0x86/0x9b0 [ 385.697985] perf_event_init_cpu+0x5a/0x90 [ 385.697991] perf_event_init+0x178/0x1a4 [ 385.697997] start_kernel+0x27f/0x3f1 [ 385.698003] verify_cpu+0x0/0xfb [ 385.698006] -> #3 (pmus_lock){+.+.}: [ 385.698015] __mutex_lock+0x86/0x9b0 [ 385.698020] perf_event_init_cpu+0x21/0x90 [ 385.698025] cpuhp_invoke_callback+0xca/0xc00 [ 385.698030] _cpu_up+0xa7/0x170 [ 385.698035] do_cpu_up+0x57/0x70 [ 385.698039] smp_init+0x62/0xa6 [ 385.698044] kernel_init_freeable+0x97/0x193 [ 385.698050] kernel_init+0xa/0x100 [ 385.698055] ret_from_fork+0x27/0x40 [ 385.698058] -> #2 (cpu_hotplug_lock.rw_sem){++++}: [ 385.698068] cpus_read_lock+0x39/0xa0 [ 385.698073] apply_workqueue_attrs+0x12/0x50 [ 385.698078] __alloc_workqueue_key+0x1d8/0x4d8 [ 385.698134] i915_gem_init_userptr+0x5f/0x80 [i915] [ 385.698176] i915_gem_init+0x7c/0x390 [i915] [ 385.698213] i915_driver_load+0x99e/0x15c0 [i915] [ 385.698250] i915_pci_probe+0x33/0x90 [i915] [ 385.698256] pci_device_probe+0xa1/0x130 [ 385.698262] driver_probe_device+0x293/0x440 [ 385.698267] __driver_attach+0xde/0xe0 [ 385.698272] bus_for_each_dev+0x5c/0x90 [ 385.698277] bus_add_driver+0x16d/0x260 [ 385.698282] driver_register+0x57/0xc0 [ 385.698287] do_one_initcall+0x3e/0x160 [ 385.698292] do_init_module+0x5b/0x1fa [ 385.698297] load_module+0x2374/0x2dc0 [ 385.698302] SyS_finit_module+0xaa/0xe0 [ 385.698307] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 385.698311] -> #1 (&dev->struct_mutex){+.+.}: [ 385.698320] __mutex_lock+0x86/0x9b0 [ 385.698361] i915_mutex_lock_interruptible+0x4c/0x130 [i915] [ 385.698403] i915_gem_fault+0x206/0x760 [i915] [ 385.698409] __do_fault+0x1a/0x70 [ 385.698413] __handle_mm_fault+0x7c4/0xdb0 [ 385.698417] handle_mm_fault+0x154/0x300 [ 385.698440] __do_page_fault+0x2d6/0x570 [ 385.698445] page_fault+0x22/0x30 [ 385.698449] -> #0 (&mm->mmap_sem){++++}: [ 385.698459] lock_acquire+0xaf/0x200 [ 385.698464] __might_fault+0x68/0x90 [ 385.698470] _copy_to_user+0x1e/0x70 [ 385.698475] perf_read+0x1aa/0x290 [ 385.698480] __vfs_read+0x23/0x120 [ 385.698484] vfs_read+0xa3/0x150 [ 385.698488] SyS_read+0x45/0xb0 [ 385.698493] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 385.698497] other info that might help us debug this: [ 385.698505] Chain exists of: &mm->mmap_sem --> pmus_lock --> &cpuctx_mutex [ 385.698517] Possible unsafe locking scenario: [ 385.698522] CPU0 CPU1 [ 385.698526] ---- ---- [ 385.698529] lock(&cpuctx_mutex); [ 385.698553] lock(pmus_lock); [ 385.698558] lock(&cpuctx_mutex); [ 385.698564] lock(&mm->mmap_sem); [ 385.698568] *** DEADLOCK *** [ 385.698574] 1 lock held by perf_pmu/2631: [ 385.698578] #0: (&cpuctx_mutex){+.+.}, at: [<ffffffff8116fe8c>] perf_event_ctx_lock_nested+0xbc/0x1d0 [ 385.698589] stack backtrace: [ 385.698595] CPU: 3 PID: 2631 Comm: perf_pmu Tainted: G U 4.14.0-CI-Patchwork_7234+ #1 [ 385.698602] Hardware name: /NUC6CAYB, BIOS AYAPLCEL.86A.0040.2017.0619.1722 06/19/2017 [ 385.698609] Call Trace: [ 385.698615] dump_stack+0x5f/0x86 [ 385.698621] print_circular_bug.isra.18+0x1d0/0x2c0 [ 385.698627] __lock_acquire+0x19c3/0x1b60 [ 385.698634] ? generic_exec_single+0x77/0xe0 [ 385.698640] ? lock_acquire+0xaf/0x200 [ 385.698644] lock_acquire+0xaf/0x200 [ 385.698650] ? __might_fault+0x3e/0x90 [ 385.698655] __might_fault+0x68/0x90 [ 385.698660] ? __might_fault+0x3e/0x90 [ 385.698665] _copy_to_user+0x1e/0x70 [ 385.698670] perf_read+0x1aa/0x290 [ 385.698675] __vfs_read+0x23/0x120 [ 385.698682] ? __fget+0x101/0x1f0 [ 385.698686] vfs_read+0xa3/0x150 [ 385.698691] SyS_read+0x45/0xb0 [ 385.698696] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 385.698701] RIP: 0033:0x7ff1c46876ed [ 385.698705] RSP: 002b:00007fff13552f90 EFLAGS: 00000293 ORIG_RAX: 0000000000000000 [ 385.698712] RAX: ffffffffffffffda RBX: ffffc90000647ff0 RCX: 00007ff1c46876ed [ 385.698718] RDX: 0000000000000010 RSI: 00007fff13552fa0 RDI: 0000000000000005 [ 385.698723] RBP: 000056063d300580 R08: 0000000000000000 R09: 0000000000000060 [ 385.698729] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000046 [ 385.698734] R13: 00007fff13552c6f R14: 00007ff1c6279d00 R15: 00007ff1c6279a40 Testcase: igt/perf_pmu Signed-off-by: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Tvrtko Ursulin <[email protected]> (cherry picked from commit ee48700) Signed-off-by: Joonas Lahtinen <[email protected]>

The RDMA netlink core code checks validity of messages by ensuring that type and operand are in range. It works well for almost all clients except NLDEV, which has cb_table less than number of operands. Request to access such operand will trigger the following kernel panic. This patch updates all places where cb_table is declared for the consistency, but only NLDEV is actually need it. general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Modules linked in: CPU: 0 PID: 522 Comm: syz-executor6 Not tainted 4.13.0+ #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 task: ffff8800657799c0 task.stack: ffff8800695d000 RIP: 0010:rdma_nl_rcv_msg+0x13a/0x4c0 RSP: 0018:ffff8800695d7838 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: 1ffff1000d2baf0b RCX: 00000000704ff4d7 RDX: 0000000000000000 RSI: ffffffff81ddb03c RDI: 00000003827fa6bc RBP: ffff8800695d7900 R08: ffffffff82ec0578 R09: 0000000000000000 R10: ffff8800695d7900 R11: 0000000000000001 R12: 000000000000001c R13: ffff880069d31e00 R14: 00000000ffffffff R15: ffff880069d357c0 FS: 00007fee6acb8700(0000) GS:ffff88006ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000201a9000 CR3: 0000000059766000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? rdma_nl_multicast+0x80/0x80 rdma_nl_rcv+0x36b/0x4d0 ? ibnl_put_attr+0xc0/0xc0 netlink_unicast+0x4bd/0x6d0 ? netlink_sendskb+0x50/0x50 ? drop_futex_key_refs.isra.4+0x68/0xb0 netlink_sendmsg+0x9ab/0xbd0 ? nlmsg_notify+0x140/0x140 ? wake_up_q+0xa1/0xf0 ? drop_futex_key_refs.isra.4+0x68/0xb0 sock_sendmsg+0x88/0xd0 sock_write_iter+0x228/0x3c0 ? sock_sendmsg+0xd0/0xd0 ? do_futex+0x3e5/0xb20 ? iov_iter_init+0xaf/0x1d0 __vfs_write+0x46e/0x640 ? sched_clock_cpu+0x1b/0x190 ? __vfs_read+0x620/0x620 ? __fget+0x23a/0x390 ? rw_verify_area+0xca/0x290 vfs_write+0x192/0x490 SyS_write+0xde/0x1c0 ? SyS_read+0x1c0/0x1c0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0xad RIP: 0033:0x7fee6a74a219 RSP: 002b:00007fee6acb7d58 EFLAGS: 00000212 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000638000 RCX: 00007fee6a74a219 RDX: 0000000000000078 RSI: 0000000020141000 RDI: 0000000000000006 RBP: 0000000000000046 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000212 R12: ffff8800695d7f98 R13: 0000000020141000 R14: 0000000000000006 R15: 00000000ffffffff Code: d6 48 b8 00 00 00 00 00 fc ff df 66 41 81 e4 ff 03 44 8d 72 ff 4a 8d 3c b5 c0 a6 7f 82 44 89 b5 4c ff ff ff 48 89 f9 48 c1 e9 03 <0f> b6 0c 01 48 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85 RIP: rdma_nl_rcv_msg+0x13a/0x4c0 RSP: ffff8800695d7838 ---[ end trace ba085d123959c8ec ]--- Kernel panic - not syncing: Fatal exception Cc: syzkaller <[email protected]> Fixes: b4c598a ("RDMA/netlink: Implement nldev device dumpit calback") Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>

This fixes a regression with readdir of impure dir in overlayfs that is shared to VM via 9p fs. Reported-by: Miguel Bernal Marin <[email protected]> Fixes: 4edb83b ("ovl: constant d_ino for non-merge dirs") Cc: <[email protected]> #4.14 Signed-off-by: Amir Goldstein <[email protected]> Tested-by: Miguel Bernal Marin <[email protected]> Signed-off-by: Miklos Szeredi <[email protected]>

When executing filesystem sync or umount on overlayfs, dirty data does not get synced as expected on upper filesystem. This patch fixes sync filesystem method to keep data consistency for overlayfs. Signed-off-by: Chengguang Xu <[email protected]> Fixes: e593b2b ("ovl: properly implement sync_filesystem()") Cc: <[email protected]> #4.11 Signed-off-by: Miklos Szeredi <[email protected]>

Lockdep gifted us with noticing the following 4-way lockup scenario: perf_trace_init() #0 mutex_lock(&event_mutex) perf_trace_event_init() perf_trace_event_reg() tp_event->class->reg() := tracepoint_probe_register #1 mutex_lock(&tracepoints_mutex) trace_point_add_func() #2 static_key_enable() #2 do_cpu_up() perf_event_init_cpu() #3 mutex_lock(&pmus_lock) #4 mutex_lock(&ctx->mutex) perf_event_task_disable() mutex_lock(&current->perf_event_mutex) #4 ctx = perf_event_ctx_lock() #5 perf_event_for_each_child() do_exit() task_work_run() __fput() perf_release() perf_event_release_kernel() #4 mutex_lock(&ctx->mutex) #5 mutex_lock(&event->child_mutex) free_event() _free_event() event->destroy() := perf_trace_destroy #0 mutex_lock(&event_mutex); Fix that by moving the free_event() out from under the locks. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>

Lockdep noticed the following 3-way lockup race: perf_trace_init() #0 mutex_lock(&event_mutex) perf_trace_event_init() perf_trace_event_reg() tp_event->class->reg() := tracepoint_probe_register #1 mutex_lock(&tracepoints_mutex) trace_point_add_func() #2 static_key_enable() #2 do_cpu_up() perf_event_init_cpu() #3 mutex_lock(&pmus_lock) #4 mutex_lock(&ctx->mutex) perf_ioctl() #4 ctx = perf_event_ctx_lock() _perf_iotcl() ftrace_profile_set_filter() #0 mutex_lock(&event_mutex) Fudge it for now by noting that the tracepoint state does not depend on the event <-> context relation. Ugly though :/ Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>

More lockdep gifts, a 5-way lockup race: perf_event_create_kernel_counter() perf_event_alloc() perf_try_init_event() x86_pmu_event_init() __x86_pmu_event_init() x86_reserve_hardware() #0 mutex_lock(&pmc_reserve_mutex); reserve_ds_buffer() #1 get_online_cpus() perf_event_release_kernel() _free_event() hw_perf_event_destroy() x86_release_hardware() #0 mutex_lock(&pmc_reserve_mutex) release_ds_buffer() #1 get_online_cpus() #1 do_cpu_up() perf_event_init_cpu() #2 mutex_lock(&pmus_lock) #3 mutex_lock(&ctx->mutex) sys_perf_event_open() mutex_lock_double() #3 mutex_lock(ctx->mutex) #4 mutex_lock_nested(ctx->mutex, 1); perf_try_init_event() #4 mutex_lock_nested(ctx->mutex, 1) x86_pmu_event_init() intel_pmu_hw_config() x86_add_exclusive() #0 mutex_lock(&pmc_reserve_mutex) Fix it by using ordering constructs instead of locking. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>

find_first_zero_bit()'s parameter 'size' is defined in bits, not in bytes. find_first_zero_bit() is called with size in bytes rather than bits, which thus defines a too low upper limit, causing dw_pcie_ep_inbound_atu() to assign iatu index #4 to both bar 4 and bar 5, which makes bar 5 overwrite the settings set by bar 4. Since the sizes of the bitmaps are known, dynamically allocate the bitmaps, and use the correct size when calling find_first_zero_bit(). Additionally, make sure that ep->num_ob_windows and ep->num_ib_windows, which are obtained from device tree, are smaller than the maximum number of iATUs (MAX_IATU_IN/MAX_IATU_OUT). Fixes: f8aed6e ("PCI: dwc: designware: Add EP mode support") Signed-off-by: Niklas Cassel <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Kishon Vijay Abraham I <[email protected]>

Scenario: 1. Port down and do fail over 2. Ap do rds_bind syscall PID: 47039 TASK: ffff89887e2fe640 CPU: 47 COMMAND: "kworker/u:6" #0 [ffff898e35f159f0] machine_kexec at ffffffff8103abf9 #1 [ffff898e35f15a60] crash_kexec at ffffffff810b96e3 #2 [ffff898e35f15b30] oops_end at ffffffff8150f518 #3 [ffff898e35f15b60] no_context at ffffffff8104854c #4 [ffff898e35f15ba0] __bad_area_nosemaphore at ffffffff81048675 #5 [ffff898e35f15bf0] bad_area_nosemaphore at ffffffff810487d3 #6 [ffff898e35f15c00] do_page_fault at ffffffff815120b8 #7 [ffff898e35f15d10] page_fault at ffffffff8150ea95 [exception RIP: unknown or invalid address] RIP: 0000000000000000 RSP: ffff898e35f15dc8 RFLAGS: 00010282 RAX: 00000000fffffffe RBX: ffff889b77f6fc00 RCX:ffffffff81c99d88 RDX: 0000000000000000 RSI: ffff896019ee08e8 RDI:ffff889b77f6fc00 RBP: ffff898e35f15df0 R8: ffff896019ee08c8 R9:0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12:ffff896019ee08c0 R13: ffff889b77f6fe68 R14: ffffffff81c99d80 R15: ffffffffa022a1e0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffff898e35f15dc8] cma_ndev_work_handler at ffffffffa022a228 [rdma_cm] #9 [ffff898e35f15df8] process_one_work at ffffffff8108a7c6 #10 [ffff898e35f15e58] worker_thread at ffffffff8108bda0 #11 [ffff898e35f15ee8] kthread at ffffffff81090fe6 PID: 45659 TASK: ffff880d313d2500 CPU: 31 COMMAND: "oracle_45659_ap" #0 [ffff881024ccfc98] __schedule at ffffffff8150bac4 #1 [ffff881024ccfd40] schedule at ffffffff8150c2cf #2 [ffff881024ccfd50] __mutex_lock_slowpath at ffffffff8150cee7 #3 [ffff881024ccfdc0] mutex_lock at ffffffff8150cdeb #4 [ffff881024ccfde0] rdma_destroy_id at ffffffffa022a027 [rdma_cm] #5 [ffff881024ccfe10] rds_ib_laddr_check at ffffffffa0357857 [rds_rdma] #6 [ffff881024ccfe50] rds_trans_get_preferred at ffffffffa0324c2a [rds] #7 [ffff881024ccfe80] rds_bind at ffffffffa031d690 [rds] #8 [ffff881024ccfeb0] sys_bind at ffffffff8142a670 PID: 45659 PID: 47039 rds_ib_laddr_check /* create id_priv with a null event_handler */ rdma_create_id rdma_bind_addr cma_acquire_dev /* add id_priv to cma_dev->id_list */ cma_attach_to_dev cma_ndev_work_handler /* event_hanlder is null */ id_priv->id.event_handler Signed-off-by: Guanglei Li <[email protected]> Signed-off-by: Honglei Wang <[email protected]> Reviewed-by: Junxiao Bi <[email protected]> Reviewed-by: Yanjun Zhu <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Acked-by: Doug Ledford <[email protected]> Signed-off-by: David S. Miller <[email protected]>

It is unlikely request_threaded_irq will fail, but if it does for some reason we should clear iommu->pr_irq in the error path. Also intel_svm_finish_prq shouldn't try to clean up the page request interrupt if pr_irq is 0. Without these, if request_threaded_irq were to fail the following occurs: fail with no fixes: [ 0.683147] ------------[ cut here ]------------ [ 0.683148] NULL pointer, cannot free irq [ 0.683158] WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:1632 irq_domain_free_irqs+0x126/0x140 [ 0.683160] Modules linked in: [ 0.683163] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #3 [ 0.683165] Hardware name: /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017 [ 0.683168] RIP: 0010:irq_domain_free_irqs+0x126/0x140 [ 0.683169] RSP: 0000:ffffc90000037ce8 EFLAGS: 00010292 [ 0.683171] RAX: 000000000000001d RBX: ffff880276283c00 RCX: ffffffff81c5e5e8 [ 0.683172] RDX: 0000000000000001 RSI: 0000000000000096 RDI: 0000000000000246 [ 0.683174] RBP: ffff880276283c00 R08: 0000000000000000 R09: 000000000000023c [ 0.683175] R10: 0000000000000007 R11: 0000000000000000 R12: 000000000000007a [ 0.683176] R13: 0000000000000001 R14: 0000000000000000 R15: 0000010010000000 [ 0.683178] FS: 0000000000000000(0000) GS:ffff88027ec80000(0000) knlGS:0000000000000000 [ 0.683180] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.683181] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0 [ 0.683182] Call Trace: [ 0.683189] intel_svm_finish_prq+0x3c/0x60 [ 0.683191] free_dmar_iommu+0x1ac/0x1b0 [ 0.683195] init_dmars+0xaaa/0xaea [ 0.683200] ? klist_next+0x19/0xc0 [ 0.683203] ? pci_do_find_bus+0x50/0x50 [ 0.683205] ? pci_get_dev_by_id+0x52/0x70 [ 0.683208] intel_iommu_init+0x498/0x5c7 [ 0.683211] pci_iommu_init+0x13/0x3c [ 0.683214] ? e820__memblock_setup+0x61/0x61 [ 0.683217] do_one_initcall+0x4d/0x1a0 [ 0.683220] kernel_init_freeable+0x186/0x20e [ 0.683222] ? set_debug_rodata+0x11/0x11 [ 0.683225] ? rest_init+0xb0/0xb0 [ 0.683226] kernel_init+0xa/0xff [ 0.683229] ret_from_fork+0x1f/0x30 [ 0.683259] Code: 89 ee 44 89 e7 e8 3b e8 ff ff 5b 5d 44 89 e7 44 89 ee 41 5c 41 5d 41 5e e9 a8 84 ff ff 48 c7 c7 a8 71 a7 81 31 c0 e8 6a d3 f9 ff <0f> ff 5b 5d 41 5c 41 5d 41 5 e c3 0f 1f 44 00 00 66 2e 0f 1f 84 [ 0.683285] ---[ end trace f7650e42792627ca ]--- with iommu->pr_irq = 0, but no check in intel_svm_finish_prq: [ 0.669561] ------------[ cut here ]------------ [ 0.669563] Trying to free already-free IRQ 0 [ 0.669573] WARNING: CPU: 3 PID: 1 at kernel/irq/manage.c:1546 __free_irq+0xa4/0x2c0 [ 0.669574] Modules linked in: [ 0.669577] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #4 [ 0.669579] Hardware name: /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017 [ 0.669581] RIP: 0010:__free_irq+0xa4/0x2c0 [ 0.669582] RSP: 0000:ffffc90000037cc0 EFLAGS: 00010082 [ 0.669584] RAX: 0000000000000021 RBX: 0000000000000000 RCX: ffffffff81c5e5e8 [ 0.669585] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000046 [ 0.669587] RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000023c [ 0.669588] R10: 0000000000000007 R11: 0000000000000000 R12: ffff880276253960 [ 0.669589] R13: ffff8802762538a4 R14: ffff880276253800 R15: ffff880276283600 [ 0.669593] FS: 0000000000000000(0000) GS:ffff88027ed80000(0000) knlGS:0000000000000000 [ 0.669594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.669596] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0 [ 0.669602] Call Trace: [ 0.669616] free_irq+0x30/0x60 [ 0.669620] intel_svm_finish_prq+0x34/0x60 [ 0.669623] free_dmar_iommu+0x1ac/0x1b0 [ 0.669627] init_dmars+0xaaa/0xaea [ 0.669631] ? klist_next+0x19/0xc0 [ 0.669634] ? pci_do_find_bus+0x50/0x50 [ 0.669637] ? pci_get_dev_by_id+0x52/0x70 [ 0.669639] intel_iommu_init+0x498/0x5c7 [ 0.669642] pci_iommu_init+0x13/0x3c [ 0.669645] ? e820__memblock_setup+0x61/0x61 [ 0.669648] do_one_initcall+0x4d/0x1a0 [ 0.669651] kernel_init_freeable+0x186/0x20e [ 0.669653] ? set_debug_rodata+0x11/0x11 [ 0.669656] ? rest_init+0xb0/0xb0 [ 0.669658] kernel_init+0xa/0xff [ 0.669661] ret_from_fork+0x1f/0x30 [ 0.669662] Code: 7a 08 75 0e e9 c3 01 00 00 4c 39 7b 08 74 57 48 89 da 48 8b 5a 18 48 85 db 75 ee 89 ee 48 c7 c7 78 67 a7 81 31 c0 e8 4c 37 fa ff <0f> ff 48 8b 34 24 4c 89 ef e 8 0e 4c 68 00 49 8b 46 40 48 8b 80 [ 0.669688] ---[ end trace 58a470248700f2fc ]--- Cc: Alex Williamson <[email protected]> Cc: Joerg Roedel <[email protected]> Cc: Ashok Raj <[email protected]> Signed-off-by: Jerry Snitselaar <[email protected]> Reviewed-by: Ashok Raj <[email protected]> Signed-off-by: Alex Williamson <[email protected]>

ACM driver may accept data to transmit while system is not fully resumed. In this case ACM driver buffers data and prepare URBs on usb anchor list. There is a little chance that two tasks put a char and initiate acm_tty_flush_chars(). In such a case, driver will put one URB twice on usb anchor list. This patch also reset length of data before resue of a buffer. This not only prevent sending rubbish, but also lower risc of race. Without this patch we hit following kernel panic in one of our stabilty/stress tests. [ 46.884442] *list_add double add*: new=ffff9b2ab7289330, prev=ffff9b2ab7289330, next=ffff9b2ab81e28e0. [ 46.884476] Modules linked in: hci_uart btbcm bluetooth rfkill_gpio igb_avb(O) cfg80211 snd_soc_sst_bxt_tdf8532 snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_soc_sst_acpi snd_soc_sst_match snd_hda_ext_core snd_hda_core trusty_timer trusty_wall trusty_log trusty_virtio trusty_ipc trusty_mem trusty_irq trusty virtio_ring virtio intel_ipu4_mmu_bxtB0 lib2600_mod_bxtB0 intel_ipu4_isys_mod_bxtB0 lib2600psys_mod_bxtB0 intel_ipu4_psys_mod_bxtB0 intel_ipu4_mod_bxtB0 intel_ipu4_wrapper_bxtB0 intel_ipu4_acpi videobuf2_dma_contig as3638 dw9714 lm3643 crlmodule smiapp smiapp_pll [ 46.884480] CPU: 1 PID: 33 Comm: kworker/u8:1 Tainted: G U W O 4.9.56-quilt-2e5dc0ac-g618ed69ced6e-dirty #4 [ 46.884489] Workqueue: events_unbound flush_to_ldisc [ 46.884494] ffffb98ac012bb08 ffffffffad3e82e5 ffffb98ac012bb58 0000000000000000 [ 46.884497] ffffb98ac012bb48 ffffffffad0a23d1 00000024ad6374dd ffff9b2ab7289330 [ 46.884500] ffff9b2ab81e28e0 ffff9b2ab7289330 0000000000000002 0000000000000000 [ 46.884501] Call Trace: [ 46.884507] [<ffffffffad3e82e5>] dump_stack+0x67/0x92 [ 46.884511] [<ffffffffad0a23d1>] __warn+0xd1/0xf0 [ 46.884513] [<ffffffffad0a244f>] warn_slowpath_fmt+0x5f/0x80 [ 46.884516] [<ffffffffad407443>] __list_add+0xb3/0xc0 [ 46.884521] [<ffffffffad71133c>] *usb_anchor_urb*+0x4c/0xa0 [ 46.884524] [<ffffffffad782c6f>] *acm_tty_flush_chars*+0x8f/0xb0 [ 46.884527] [<ffffffffad782cd1>] *acm_tty_put_char*+0x41/0x100 [ 46.884530] [<ffffffffad4ced34>] tty_put_char+0x24/0x40 [ 46.884533] [<ffffffffad4d3bf5>] do_output_char+0xa5/0x200 [ 46.884535] [<ffffffffad4d3e98>] __process_echoes+0x148/0x290 [ 46.884538] [<ffffffffad4d654c>] n_tty_receive_buf_common+0x57c/0xb00 [ 46.884541] [<ffffffffad4d6ae4>] n_tty_receive_buf2+0x14/0x20 [ 46.884543] [<ffffffffad4d9662>] tty_ldisc_receive_buf+0x22/0x50 [ 46.884545] [<ffffffffad4d9c05>] flush_to_ldisc+0xc5/0xe0 [ 46.884549] [<ffffffffad0bcfe8>] process_one_work+0x148/0x440 [ 46.884551] [<ffffffffad0bdc19>] worker_thread+0x69/0x4a0 [ 46.884554] [<ffffffffad0bdbb0>] ? max_active_store+0x80/0x80 [ 46.884556] [<ffffffffad0c2e10>] kthread+0x110/0x130 [ 46.884559] [<ffffffffad0c2d00>] ? kthread_park+0x60/0x60 [ 46.884563] [<ffffffffadad9917>] ret_from_fork+0x27/0x40 [ 46.884566] ---[ end trace 3bd599058b8a9eb3 ]--- Signed-off-by: Dominik Bozek <[email protected]> Signed-off-by: Kuppuswamy Sathyanarayanan <[email protected]> Acked-by: Oliver Neukum <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

One I2C bus on my Atom E3845 board has been broken since 4.9. It has two devices, both declared by ACPI and with built-in drivers. There are two back-to-back transactions originating from the kernel, one targeting each device. The first transaction works, the second one locks up the I2C controller. The controller never recovers. These kernel logs show up whenever an I2C transaction is attempted after this failure. i2c-designware-pci 0000:00:18.3: timeout in disabling adapter i2c-designware-pci 0000:00:18.3: timeout waiting for bus ready Waiting for the I2C controller status to indicate that it is enabled before programming it fixes the issue. I have tested this patch on 4.14 and 4.15. Fixes: commit 2702ea7 ("i2c: designware: wait for disable/enable only if necessary") Cc: linux-stable <[email protected]> #4.13+ Signed-off-by: Ben Gardner <[email protected]> Acked-by: Jarkko Nikula <[email protected]> Reviewed-by: José Roberto de Souza <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>

It was reported by Sergey Senozhatsky that if THP (Transparent Huge Page) and frontswap (via zswap) are both enabled, when memory goes low so that swap is triggered, segfault and memory corruption will occur in random user space applications as follow, kernel: urxvt[338]: segfault at 20 ip 00007fc08889ae0d sp 00007ffc73a7fc40 error 6 in libc-2.26.so[7fc08881a000+1ae000] #0 0x00007fc08889ae0d _int_malloc (libc.so.6) #1 0x00007fc08889c2f3 malloc (libc.so.6) #2 0x0000560e6004bff7 _Z14rxvt_wcstoutf8PKwi (urxvt) #3 0x0000560e6005e75c n/a (urxvt) #4 0x0000560e6007d9f1 _ZN16rxvt_perl_interp6invokeEP9rxvt_term9hook_typez (urxvt) #5 0x0000560e6003d988 _ZN9rxvt_term9cmd_parseEv (urxvt) #6 0x0000560e60042804 _ZN9rxvt_term6pty_cbERN2ev2ioEi (urxvt) #7 0x0000560e6005c10f _Z17ev_invoke_pendingv (urxvt) #8 0x0000560e6005cb55 ev_run (urxvt) #9 0x0000560e6003b9b9 main (urxvt) #10 0x00007fc08883af4a __libc_start_main (libc.so.6) #11 0x0000560e6003f9da _start (urxvt) After bisection, it was found the first bad commit is bd4c82c ("mm, THP, swap: delay splitting THP after swapped out"). The root cause is as follows: When the pages are written to swap device during swapping out in swap_writepage(), zswap (fontswap) is tried to compress the pages to improve performance. But zswap (frontswap) will treat THP as a normal page, so only the head page is saved. After swapping in, tail pages will not be restored to their original contents, causing memory corruption in the applications. This is fixed by refusing to save page in the frontswap store functions if the page is a THP. So that the THP will be swapped out to swap device. Another choice is to split THP if frontswap is enabled. But it is found that the frontswap enabling isn't flexible. For example, if CONFIG_ZSWAP=y (cannot be module), frontswap will be enabled even if zswap itself isn't enabled. Frontswap has multiple backends, to make it easy for one backend to enable THP support, the THP checking is put in backend frontswap store functions instead of the general interfaces. Link: http://lkml.kernel.org/r/[email protected] Fixes: bd4c82c ("mm, THP, swap: delay splitting THP after swapped out") Signed-off-by: "Huang, Ying" <[email protected]> Reported-by: Sergey Senozhatsky <[email protected]> Tested-by: Sergey Senozhatsky <[email protected]> Suggested-by: Minchan Kim <[email protected]> [put THP checking in backend] Cc: Konrad Rzeszutek Wilk <[email protected]> Cc: Dan Streetman <[email protected]> Cc: Seth Jennings <[email protected]> Cc: Tetsuo Handa <[email protected]> Cc: Shaohua Li <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Shakeel Butt <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: Juergen Gross <[email protected]> Cc: <[email protected]> [4.14] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

Reported by syzkaller: WARNING: CPU: 6 PID: 2434 at arch/x86/kvm/vmx.c:6660 handle_ept_misconfig+0x54/0x1e0 [kvm_intel] CPU: 6 PID: 2434 Comm: repro_test Not tainted 4.15.0+ #4 RIP: 0010:handle_ept_misconfig+0x54/0x1e0 [kvm_intel] Call Trace: vmx_handle_exit+0xbd/0xe20 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xdaf/0x1d50 [kvm] kvm_vcpu_ioctl+0x3e9/0x720 [kvm] do_vfs_ioctl+0xa4/0x6a0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x25/0x9c The testcase creates a first thread to issue KVM_SMI ioctl, and then creates a second thread to mmap and operate on the same vCPU. This triggers a race condition when running the testcase with multiple threads. Sometimes one thread exits with a triple fault while another thread mmaps and operates on the same vCPU. Because CS=0x3000/IP=0x8000 is not mapped, accessing the SMI handler results in an EPT misconfig. This patch fixes it by returning RET_PF_EMULATE in kvm_handle_bad_page(), which will go on to cause an emulation failure and an exit with KVM_EXIT_INTERNAL_ERROR. Reported-by: syzbot+c1d9517cab094dae65e446c0c5b4de6c40f4dc58@syzkaller.appspotmail.com Cc: Paolo Bonzini <[email protected]> Cc: Radim Krčmář <[email protected]> Cc: [email protected] Signed-off-by: Wanpeng Li <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>

This patch fixes NULL pointer crash due to active timer running for abort IOCB. From crash dump analysis it was discoverd that get_next_timer_interrupt() encountered a corrupted entry on the timer list. #9 [ffff95e1f6f0fd40] page_fault at ffffffff914fe8f8 [exception RIP: get_next_timer_interrupt+440] RIP: ffffffff90ea3088 RSP: ffff95e1f6f0fdf0 RFLAGS: 00010013 RAX: ffff95e1f6451028 RBX: 000218e2389e5f40 RCX: 00000001232ad600 RDX: 0000000000000001 RSI: ffff95e1f6f0fdf0 RDI: 0000000001232ad6 RBP: ffff95e1f6f0fe40 R8: ffff95e1f6451188 R9: 0000000000000001 R10: 0000000000000016 R11: 0000000000000016 R12: 00000001232ad5f6 R13: ffff95e1f6450000 R14: ffff95e1f6f0fdf8 R15: ffff95e1f6f0fe10 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Looking at the assembly of get_next_timer_interrupt(), address came from %r8 (ffff95e1f6451188) which is pointing to list_head with single entry at ffff95e5ff621178. 0xffffffff90ea307a <get_next_timer_interrupt+426>: mov (%r8),%rdx 0xffffffff90ea307d <get_next_timer_interrupt+429>: cmp %r8,%rdx 0xffffffff90ea3080 <get_next_timer_interrupt+432>: je 0xffffffff90ea30a7 <get_next_timer_interrupt+471> 0xffffffff90ea3082 <get_next_timer_interrupt+434>: nopw 0x0(%rax,%rax,1) 0xffffffff90ea3088 <get_next_timer_interrupt+440>: testb $0x1,0x18(%rdx) crash> rd ffff95e1f6451188 10 ffff95e1f6451188: ffff95e5ff621178 ffff95e5ff621178 x.b.....x.b..... ffff95e1f6451198: ffff95e1f6451198 ffff95e1f6451198 ..E.......E..... ffff95e1f64511a8: ffff95e1f64511a8 ffff95e1f64511a8 ..E.......E..... ffff95e1f64511b8: ffff95e77cf509a0 ffff95e77cf509a0 ...|.......|.... ffff95e1f64511c8: ffff95e1f64511c8 ffff95e1f64511c8 ..E.......E..... crash> rd ffff95e5ff621178 10 ffff95e5ff621178: 0000000000000001 ffff95e15936aa00 ..........6Y.... ffff95e5ff621188: 0000000000000000 00000000ffffffff ................ ffff95e5ff621198: 00000000000000a0 0000000000000010 ................ ffff95e5ff6211a8: ffff95e5ff621198 000000000000000c ..b............. ffff95e5ff6211b8: 00000f5800000000 ffff95e751f8d720 ....X... ..Q.... ffff95e5ff621178 belongs to freed mempool object at ffff95e5ff621080. CACHE NAME OBJSIZE ALLOCATED TOTAL SLABS SSIZE ffff95dc7fd74d00 mnt_cache 384 19785 24948 594 16k SLAB MEMORY NODE TOTAL ALLOCATED FREE ffffdc5dabfd8800 ffff95e5ff620000 1 42 29 13 FREE / [ALLOCATED] ffff95e5ff621080 (cpu 6 cache) Examining the contents of that memory reveals a pointer to a constant string in the driver, "abort\0", which is set by qla24xx_async_abort_cmd(). crash> rd ffffffffc059277c 20 ffffffffc059277c: 6e490074726f6261 0074707572726574 abort.Interrupt. ffffffffc059278c: 00676e696c6c6f50 6920726576697244 Polling.Driver i ffffffffc059279c: 646f6d207325206e 6974736554000a65 n %s mode..Testi ffffffffc05927ac: 636976656420676e 786c252074612065 ng device at %lx ffffffffc05927bc: 6b63656843000a2e 646f727020676e69 ...Checking prod ffffffffc05927cc: 6f20444920746375 0a2e706968632066 uct ID of chip.. ffffffffc05927dc: 5120646e756f4600 204130303232414c .Found QLA2200A ffffffffc05927ec: 43000a2e70696843 20676e696b636568 Chip...Checking ffffffffc05927fc: 65786f626c69616d 6c636e69000a2e73 mailboxes...incl ffffffffc059280c: 756e696c2f656475 616d2d616d642f78 ude/linux/dma-ma crash> struct -ox srb_iocb struct srb_iocb { union { struct {...} logio; struct {...} els_logo; struct {...} tmf; struct {...} fxiocb; struct {...} abt; struct ct_arg ctarg; struct {...} mbx; struct {...} nack; [0x0 ] } u; [0xb8] struct timer_list timer; [0x108] void (*timeout)(void *); } SIZE: 0x110 crash> ! bc ibase=16 obase=10 B8+40 F8 The object is a srb_t, and at offset 0xf8 within that structure (i.e. ffff95e5ff621080 + f8 -> ffff95e5ff621178) is a struct timer_list. Cc: <[email protected]> #4.4+ Fixes: 4440e46 ("[SCSI] qla2xxx: Add IOCB Abort command asynchronous handling.") Signed-off-by: Himanshu Madhani <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>

iproute2 print_skbmod() prints the configured ethertype using format 0x%X: therefore, test 9aa8 systematically fails, because it configures action #4 using ethertype 0x0031, and expects 0x0031 when it reads it back. Changing the expected value to 0x31 lets the test result 'not ok' become 'ok'. tested with: # ./tdc.py -e 9aa8 Test 9aa8: Get a single skbmod action from a list All test results: 1..1 ok 1 9aa8 Get a single skbmod action from a list Fixes: cf797ac ("tc-testing: Add test cases for police and skbmod") Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>

Currently we can crash perf record when running in pipe mode, like: $ perf record ls | perf report # To display the perf.data header info, please use --header/--header-only options. # perf: Segmentation fault Error: The - file has no samples! The callstack of the crash is: 0x0000000000515242 in perf_event__synthesize_event_update_name 3513 ev = event_update_event__new(len + 1, PERF_EVENT_UPDATE__NAME, evsel->id[0]); (gdb) bt #0 0x0000000000515242 in perf_event__synthesize_event_update_name #1 0x00000000005158a4 in perf_event__synthesize_extra_attr #2 0x0000000000443347 in record__synthesize #3 0x00000000004438e3 in __cmd_record #4 0x000000000044514e in cmd_record #5 0x00000000004cbc95 in run_builtin #6 0x00000000004cbf02 in handle_internal_command #7 0x00000000004cc054 in run_argv #8 0x00000000004cc422 in main The reason of the crash is that the evsel does not have ids array allocated and the pipe's synthesize code tries to access it. We don't force evsel ids allocation when we have single event, because it's not needed. However we need it when we are in pipe mode even for single event as a key for evsel update event. Fixing this by forcing evsel ids allocation event for single event, when we are in pipe mode. Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

After v4.12 commit e2460f2 ("dm: mark targets that pass integrity data"), dm-multipath, e.g. on DIF+DIX SCSI disk paths, does not support block integrity any more. So add it to the whitelist. This is also a pre-requisite to use block integrity with other dm layer(s) on top of multipath, such as kpartx partitions (dm-linear) or LVM. Also, bump target version to reflect this fix. Fixes: e2460f2 ("dm: mark targets that pass integrity data") Cc: <[email protected]> #4.12+ Bisected-by: Fedor Loshakov <[email protected]> Signed-off-by: Steffen Maier <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: Martin K. Petersen <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>

Although we've implemented PSCI 0.1, 0.2 and 1.0, we expose either 0.1 or 1.0 to a guest, defaulting to the latest version of the PSCI implementation that is compatible with the requested version. This is no different from doing a firmware upgrade on KVM. But in order to give a chance to hypothetical badly implemented guests that would have a fit by discovering something other than PSCI 0.2, let's provide a new API that allows userspace to pick one particular version of the API. This is implemented as a new class of "firmware" registers, where we expose the PSCI version. This allows the PSCI version to be save/restored as part of a guest migration, and also set to any supported version if the guest requires it. Cc: [email protected] #4.16 Reviewed-by: Christoffer Dall <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>

torvalds and others added 2 commits November 7, 2017 09:04

Esteban-Rocha merged commit da6c618 into Esteban-Rocha:master Nov 8, 2017

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update from base #4

Update from base #4

Esteban-Rocha commented Nov 8, 2017

Update from base #4

Update from base #4

Conversation

Esteban-Rocha commented Nov 8, 2017