Update 5.4-2.1.x-imx to v5.4.68 from stable #144

zandrey · 2020-09-27T21:00:46Z

Automatic merge performed, no conflicts reported.

Kernel has been built for both aarch64 (imx_v8_defconfig) and arm32 (imx_v7_defconfig).

-- andrey

commit 37bd224 upstream. In pfkey_dump() dplen and splen can both be specified to access the xfrm_address_t structure out of bounds in__xfrm_state_filter_match() when it calls addr_match() with the indexes. Return EINVAL if either are out of range. Signed-off-by: Mark Salyzyn <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: Steffen Klassert <[email protected]> Cc: Herbert Xu <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Steffen Klassert <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 9f13457 ] At the time of do_rest, ibmvnic tries to re-initalize the tx_pools and rx_pools to avoid re-allocating the long term buffer. However there is a window inside do_reset that the tx_pools and rx_pools were freed before re-initialized making it possible to deference null pointers. This patch fix this issue by always check the tx_pool and rx_pool are not NULL after ibmvnic_login. If so, re-allocating the pools. This will avoid getting into calling reset_tx/rx_pools with NULL adapter tx_pools/rx_pools pointer. Also add null pointer check in reset_tx_pools and reset_rx_pools to safe handle NULL pointer case. Signed-off-by: Mingming Cao <[email protected]> Signed-off-by: Dany Madden <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 8ae4dff ] Indentation and logic clearly show that this code is missing parenthesis. Fixes: 9f13457 ("ibmvnic fix NULL tx_pools and rx_tools issue at do_reset") Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b039909 ] If a kprobe is marked as gone, we should not kill it again. Otherwise, we can disarm the kprobe more than once. In that case, the statistics of kprobe_ftrace_enabled can unbalance which can lead to that kprobe do not work. Fixes: e8386a0 ("kprobes: support probing module __exit function") Co-developed-by: Chengming Zhou <[email protected]> Signed-off-by: Muchun Song <[email protected]> Signed-off-by: Chengming Zhou <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Cc: "Naveen N . Rao" <[email protected]> Cc: Anil S Keshavamurthy <[email protected]> Cc: David S. Miller <[email protected]> Cc: Song Liu <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ec0abae ] A migrating transparent huge page has to already be unmapped. Otherwise, the page could be modified while it is being copied to a new page and data could be lost. The function __split_huge_pmd() checks for a PMD migration entry before calling __split_huge_pmd_locked() leading one to think that __split_huge_pmd_locked() can handle splitting a migrating PMD. However, the code always increments the page->_mapcount and adjusts the memory control group accounting assuming the page is mapped. Also, if the PMD entry is a migration PMD entry, the call to is_huge_zero_pmd(*pmd) is incorrect because it calls pmd_pfn(pmd) instead of migration_entry_to_pfn(pmd_to_swp_entry(pmd)). Fix these problems by checking for a PMD migration entry. Fixes: 84c3fc4 ("mm: thp: check pmd migration entry in common path") Signed-off-by: Ralph Campbell <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Yang Shi <[email protected]> Reviewed-by: Zi Yan <[email protected]> Cc: Jerome Glisse <[email protected]> Cc: John Hubbard <[email protected]> Cc: Alistair Popple <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Bharata B Rao <[email protected]> Cc: Ben Skeggs <[email protected]> Cc: Shuah Khan <[email protected]> Cc: <[email protected]> [4.14+] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit cc8e58f ] The following deadlock scenario is triggered by syzbot: Thread A: Thread B: tcf_idr_check_alloc() ... populate_metalist() rtnl_unlock() rtnl_lock() ... request_module() tcf_idr_check_alloc() rtnl_lock() At this point, thread A is waiting for thread B to release RTNL lock, while thread B is waiting for thread A to commit the IDR change with tcf_idr_insert() later. Break this deadlock situation by preloading ife modules earlier, before tcf_idr_check_alloc(), this is fine because we only need to load modules we need potentially. Reported-and-tested-by: [email protected] Fixes: 0190c1d ("net: sched: atomically check-allocate action") Cc: Jamal Hadi Salim <[email protected]> Cc: Vlad Buslov <[email protected]> Cc: Jiri Pirko <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit b340dc6 ] When the driver goes through PCIe AER reset in error state, all firmware messages will timeout because the PCIe bus is no longer accessible. This can lead to AER reset taking many minutes to complete as each firmware command takes time to timeout. Define a new macro BNXT_NO_FW_ACCESS() to skip these firmware messages when either firmware is in fatal error state or when pci_channel_offline() is true. It now takes a more reasonable 20 to 30 seconds to complete AER recovery. Fixes: b4fff20 ("bnxt_en: Do not send firmware messages if firmware is in error state.") Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit b16939b ] bnxt_fw_reset_task() which runs from a workqueue can race with bnxt_remove_one(). For example, if firmware reset and VF FLR are happening at about the same time. bnxt_remove_one() already cancels the workqueue and waits for it to finish, but we need to do this earlier before the devlink reporters are destroyed. This will guarantee that the devlink reporters will always be valid when bnxt_fw_reset_task() is still running. Fixes: b148bb2 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().") Reviewed-by: Edwin Peer <[email protected]> Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit f4a26a9 ] Fix the memory leak in mps during module unload path by freeing mps reference entries if the list adpter->mps_ref is not already empty Fixes: 28b3870 ("cxgb4: Re-work the logic for mps refcounting") Signed-off-by: Raju Rangoju <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 94cc242 ] Pass the correct offset to clear the stale filter hit bytes counter. Otherwise, the counter starts incrementing from the stale information, instead of 0. Fixes: 12b276f ("cxgb4: add support to create hash filters") Signed-off-by: Ganji Aravind <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 34beb21 ] This patch adds transport ports information for route lookup so that IPsec can select Geneve tunnel traffic to do encryption. This is needed for OVS/OVN IPsec with encrypted Geneve tunnels. This can be tested by configuring a host-host VPN using an IKE daemon and specifying port numbers. For example, for an Openswan-type configuration, the following parameters should be configured on both hosts and IPsec set up as-per normal: $ cat /etc/ipsec.conf conn in ... left=$IP1 right=$IP2 ... leftprotoport=udp/6081 rightprotoport=udp ... conn out ... left=$IP1 right=$IP2 ... leftprotoport=udp rightprotoport=udp/6081 ... The tunnel can then be setup using "ip" on both hosts (but changing the relevant IP addresses): $ ip link add tun type geneve id 1000 remote $IP2 $ ip addr add 192.168.0.1/24 dev tun $ ip link set tun up This can then be tested by pinging from $IP1: $ ping 192.168.0.2 Without this patch the traffic is unencrypted on the wire. Fixes: 2d07dc7 ("geneve: add initial netdev driver for GENEVE tunnels") Signed-off-by: Qiuyu Xiao <[email protected]> Signed-off-by: Mark Gray <[email protected]> Reviewed-by: Greg Rose <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 66d42ed ] There are a couple bugs here: 1) If opt[1] is zero then this results in a forever loop. If the value is less than 2 then it is invalid. 2) It assumes that "len" is more than sizeof(valid_accm) or 6 which can result in memory corruption. In the case of LCP_OPTION_ACCM, then we should check "opt[1]" instead of "len" because, if "opt[1]" is less than sizeof(valid_accm) then "nak_len" gets out of sync and it can lead to memory corruption in the next iterations through the loop. In case of LCP_OPTION_MAGIC, the only valid value for opt[1] is 6, but the code is trying to log invalid data so we should only discard the data when "len" is less than 6 because that leads to a read overflow. Reported-by: ChenNan Of Chaitin Security Research Lab <[email protected]> Fixes: e022c2f ("WAN: new synchronous PPP implementation for generic HDLC.") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit ba9e04a ] Currently, in tcp_v4_reqsk_send_ack() and tcp_v4_send_reset(), we echo the TOS value of the received packets in the response. However, we do not want to echo the lower 2 ECN bits in accordance with RFC 3168 6.1.5 robustness principles. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Wei Wang <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 1869e22 ] flowi4_multipath_hash was added by the commit referenced below for tunnels. Unfortunately, the patch did not initialize the new field for several fast path lookups that do not initialize the entire flow struct to 0. Fix those locations. Currently, flowi4_multipath_hash is random garbage and affects the hash value computed by fib_multipath_hash for multipath selection. Fixes: 24ba144 ("route: Add multipath_hash in flowi_common to make user-define hash") Signed-off-by: David Ahern <[email protected]> Cc: wenxu <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 2fbc6e8 ] Kfir reported that pmtu exceptions are not created properly for deployments where multipath routes use the same device. After some digging I see 2 compounding problems: 1. ip_route_output_key_hash_rcu is updating the flowi4_oif *after* the route lookup. This is the second use case where this has been a problem (the first is related to use of vti devices with VRF). I can not find any reason for the oif to be changed after the lookup; the code goes back to the start of git. It does not seem logical so remove it. 2. fib_lookups for exceptions do not call fib_select_path to handle multipath route selection based on the hash. The end result is that the fib_lookup used to add the exception always creates it based using the first leg of the route. An example topology showing the problem: | host1 +------+ | eth0 | .209 +------+ | +------+ switch | br0 | +------+ | +---------+---------+ | host2 | host3 +------+ +------+ | eth0 | .250 | eth0 | 192.168.252.252 +------+ +------+ +-----+ +-----+ | vti | .2 | vti | 192.168.247.3 +-----+ +-----+ \ / ================================= tunnels 192.168.247.1/24 for h in host1 host2 host3; do ip netns add ${h} ip -netns ${h} link set lo up ip netns exec ${h} sysctl -wq net.ipv4.ip_forward=1 done ip netns add switch ip -netns switch li set lo up ip -netns switch link add br0 type bridge stp 0 ip -netns switch link set br0 up for n in 1 2 3; do ip -netns switch link add eth-sw type veth peer name eth-h${n} ip -netns switch li set eth-h${n} master br0 up ip -netns switch li set eth-sw netns host${n} name eth0 done ip -netns host1 addr add 192.168.252.209/24 dev eth0 ip -netns host1 link set dev eth0 up ip -netns host1 route add 192.168.247.0/24 \ nexthop via 192.168.252.250 dev eth0 nexthop via 192.168.252.252 dev eth0 ip -netns host2 addr add 192.168.252.250/24 dev eth0 ip -netns host2 link set dev eth0 up ip -netns host2 addr add 192.168.252.252/24 dev eth0 ip -netns host3 link set dev eth0 up ip netns add tunnel ip -netns tunnel li set lo up ip -netns tunnel li add br0 type bridge ip -netns tunnel li set br0 up for n in $(seq 11 20); do ip -netns tunnel addr add dev br0 192.168.247.${n}/24 done for n in 2 3 do ip -netns tunnel link add vti${n} type veth peer name eth${n} ip -netns tunnel link set eth${n} mtu 1360 master br0 up ip -netns tunnel link set vti${n} netns host${n} mtu 1360 up ip -netns host${n} addr add dev vti${n} 192.168.247.${n}/24 done ip -netns tunnel ro add default nexthop via 192.168.247.2 nexthop via 192.168.247.3 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.11 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.15 ip -netns host1 ro ls cache Before this patch the cache always shows exceptions against the first leg in the multipath route; 192.168.252.250 per this example. Since the hash has an initial random seed, you may need to vary the final octet more than what is listed. In my tests, using addresses between 11 and 19 usually found 1 that used both legs. With this patch, the cache will have exceptions for both legs. Fixes: 4895c77 ("ipv4: Add FIB nexthop exceptions") Reported-by: Kfir Itzhak <[email protected]> Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 843d926 ] syzbot reported twice a lockdep issue in fib6_del() [1] which I think is caused by net->ipv6.fib6_null_entry having a NULL fib6_table pointer. fib6_del() already checks for fib6_null_entry special case, we only need to return earlier. Bug seems to occur very rarely, I have thus chosen a 'bug origin' that makes backports not too complex. [1] WARNING: suspicious RCU usage 5.9.0-rc4-syzkaller #0 Not tainted ----------------------------- net/ipv6/ip6_fib.c:1996 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by syz-executor.5/8095: #0: ffffffff8a7ea708 (rtnl_mutex){+.+.}-{3:3}, at: ppp_release+0x178/0x240 drivers/net/ppp/ppp_generic.c:401 Freescale#1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: spin_trylock_bh include/linux/spinlock.h:414 [inline] Freescale#1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: fib6_run_gc+0x21b/0x2d0 net/ipv6/ip6_fib.c:2312 Freescale#2: ffffffff89bd6a40 (rcu_read_lock){....}-{1:2}, at: __fib6_clean_all+0x0/0x290 net/ipv6/ip6_fib.c:2613 Freescale#3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:359 [inline] Freescale#3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: __fib6_clean_all+0x107/0x290 net/ipv6/ip6_fib.c:2245 stack backtrace: CPU: 1 PID: 8095 Comm: syz-executor.5 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 fib6_del+0x12b4/0x1630 net/ipv6/ip6_fib.c:1996 fib6_clean_node+0x39b/0x570 net/ipv6/ip6_fib.c:2180 fib6_walk_continue+0x4aa/0x8e0 net/ipv6/ip6_fib.c:2102 fib6_walk+0x182/0x370 net/ipv6/ip6_fib.c:2150 fib6_clean_tree+0xdb/0x120 net/ipv6/ip6_fib.c:2230 __fib6_clean_all+0x120/0x290 net/ipv6/ip6_fib.c:2246 fib6_clean_all net/ipv6/ip6_fib.c:2257 [inline] fib6_run_gc+0x113/0x2d0 net/ipv6/ip6_fib.c:2320 ndisc_netdev_event+0x217/0x350 net/ipv6/ndisc.c:1805 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2033 call_netdevice_notifiers_extack net/core/dev.c:2045 [inline] call_netdevice_notifiers net/core/dev.c:2059 [inline] dev_close_many+0x30b/0x650 net/core/dev.c:1634 rollback_registered_many+0x3a8/0x1210 net/core/dev.c:9261 rollback_registered net/core/dev.c:9329 [inline] unregister_netdevice_queue+0x2dd/0x570 net/core/dev.c:10410 unregister_netdevice include/linux/netdevice.h:2774 [inline] ppp_release+0x216/0x240 drivers/net/ppp/ppp_generic.c:403 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 421842e ("net/ipv6: Add fib6_null_entry") Signed-off-by: Eric Dumazet <[email protected]> Cc: David Ahern <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

… under RCU [ Upstream commit 99f62a7 ] When calling the RCU brother of br_vlan_get_pvid(), lockdep warns: ============================= WARNING: suspicious RCU usage 5.9.0-rc3-01631-g13c17acb8e38-dirty torvalds#814 Not tainted ----------------------------- net/bridge/br_private.h:1054 suspicious rcu_dereference_protected() usage! Call trace: lockdep_rcu_suspicious+0xd4/0xf8 __br_vlan_get_pvid+0xc0/0x100 br_vlan_get_pvid_rcu+0x78/0x108 The warning is because br_vlan_get_pvid_rcu() calls nbp_vlan_group() which calls rtnl_dereference() instead of rcu_dereference(). In turn, rtnl_dereference() calls rcu_dereference_protected() which assumes operation under an RCU write-side critical section, which obviously is not the case here. So, when the incorrect primitive is used to access the RCU-protected VLAN group pointer, READ_ONCE() is not used, which may cause various unexpected problems. I'm sad to say that br_vlan_get_pvid() and br_vlan_get_pvid_rcu() cannot share the same implementation. So fix the bug by splitting the 2 functions, and making br_vlan_get_pvid_rcu() retrieve the VLAN groups under proper locking annotations. Fixes: 7582f5b ("bridge: add br_vlan_get_pvid_rcu()") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 297e77e ] The parameter passed via DCB_ATTR_DCB_BUFFER is a struct dcbnl_buffer. The field prio2buffer is an array of IEEE_8021Q_MAX_PRIORITIES bytes, where each value is a number of a buffer to direct that priority's traffic to. That value is however never validated to lie within the bounds set by DCBX_MAX_BUFFERS. The only driver that currently implements the callback is mlx5 (maintainers CCd), and that does not do any validation either, in particual allowing incorrect configuration if the prio2buffer value does not fit into 4 bits. Instead of offloading the need to validate the buffer index to drivers, do it right there in core, and bounce the request if the value is too large. CC: Parav Pandit <[email protected]> CC: Saeed Mahameed <[email protected]> Fixes: e549f6f ("net/dcb: Add dcbnl buffer attribute") Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 4ddcaf1 ] When removing a port from a VLAN we are just erasing the member config for the VLAN, which is wrong: other ports can be using it. Just mask off the port and only zero out the rest of the member config once ports using of the VLAN are removed from it. Reported-by: Florian Fainelli <[email protected]> Fixes: d865295 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit e1b9efe ] When a netdev is enslaved to a bridge, its parent identifier is queried. This is done so that packets that were already forwarded in hardware will not be forwarded again by the bridge device between netdevs belonging to the same hardware instance. The operation fails when the netdev is an upper of netdevs with different parent identifiers. Instead of failing the enslavement, have dev_get_port_parent_id() return '-EOPNOTSUPP' which will signal the bridge to skip the query operation. Other callers of the function are not affected by this change. Fixes: 7e1146e ("net: devlink: introduce devlink_compat_switch_id_get() helper") Signed-off-by: Ido Schimmel <[email protected]> Reported-by: Vasundhara Volam <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit db7cd91 ] When IPV6_SEG6_HMAC is enabled and CRYPTO is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for CRYPTO_HMAC Depends on [n]: CRYPTO [=n] Selected by [y]: - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y] WARNING: unmet direct dependencies detected for CRYPTO_SHA1 Depends on [n]: CRYPTO [=n] Selected by [y]: - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y] WARNING: unmet direct dependencies detected for CRYPTO_SHA256 Depends on [n]: CRYPTO [=n] Selected by [y]: - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y] The reason is that IPV6_SEG6_HMAC selects CRYPTO_HMAC, CRYPTO_SHA1, and CRYPTO_SHA256 without depending on or selecting CRYPTO while those configs are subordinate to CRYPTO. Honor the kconfig menu hierarchy to remove kconfig dependency warnings. Fixes: bf355b8 ("ipv6: sr: add core files for SR HMAC support") Signed-off-by: Necip Fazil Yildiran <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit cefc235 ] Currently, when an FTE is allocated, its refcount is decreased to 0 with the purpose it will not be a stand alone steering object and every rule (destination) of the FTE would increase the refcount. When mlx5_cleanup_fs is called while not all rules were deleted by the steering users, it hit refcount underflow on the FTE once clean_tree calls to tree_remove_node after the deleted rules already decreased the refcount to 0. FTE is no longer destroyed implicitly when the last rule (destination) is deleted. mlx5_del_flow_rules avoids it by increasing the refcount on the FTE and destroy it explicitly after all rules were deleted. So we can avoid the refcount underflow by making FTE as stand alone object. In addition need to set del_hw_func to FTE so the HW object will be destroyed when the FTE is deleted from the cleanup_tree flow. refcount_t: underflow; use-after-free. WARNING: CPU: 2 PID: 15715 at lib/refcount.c:28 refcount_warn_saturate+0xd9/0xe0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: tree_put_node+0xf2/0x140 [mlx5_core] clean_tree+0x4e/0xf0 [mlx5_core] clean_tree+0x4e/0xf0 [mlx5_core] clean_tree+0x4e/0xf0 [mlx5_core] clean_tree+0x5f/0xf0 [mlx5_core] clean_tree+0x4e/0xf0 [mlx5_core] clean_tree+0x5f/0xf0 [mlx5_core] mlx5_cleanup_fs+0x26/0x270 [mlx5_core] mlx5_unload+0x2e/0xa0 [mlx5_core] mlx5_unload_one+0x51/0x120 [mlx5_core] mlx5_devlink_reload_down+0x51/0x90 [mlx5_core] devlink_reload+0x39/0x120 ? devlink_nl_cmd_reload+0x43/0x220 genl_rcv_msg+0x1e4/0x420 ? genl_family_rcv_msg_attrs_parse+0x100/0x100 netlink_rcv_skb+0x47/0x110 genl_rcv+0x24/0x40 netlink_unicast+0x217/0x2f0 netlink_sendmsg+0x30f/0x430 sock_sendmsg+0x30/0x40 __sys_sendto+0x10e/0x140 ? handle_mm_fault+0xc4/0x1f0 ? do_page_fault+0x33f/0x630 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x48/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 718ce4d ("net/mlx5: Consolidate update FTE for all removal changes") Fixes: bd71b08 ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Maor Gottlieb <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…qdisc [ Upstream commit 2fb541c ] Currently there is concurrent reset and enqueue operation for the same lockless qdisc when there is no lock to synchronize the q->enqueue() in __dev_xmit_skb() with the qdisc reset operation in qdisc_deactivate() called by dev_deactivate_queue(), which may cause out-of-bounds access for priv->ring[] in hns3 driver if user has requested a smaller queue num when __dev_xmit_skb() still enqueue a skb with a larger queue_mapping after the corresponding qdisc is reset, and call hns3_nic_net_xmit() with that skb later. Reused the existing synchronize_net() in dev_deactivate_many() to make sure skb with larger queue_mapping enqueued to old qdisc(which is saved in dev_queue->qdisc_sleeping) will always be reset when dev_reset_queue() is called. Fixes: 6b3ba91 ("net: sched: allow qdiscs to handle locking") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit fe81d9f ] When calculating ancestor_size with IPv6 enabled, simply using sizeof(struct ipv6_pinfo) doesn't account for extra bytes needed for alignment in the struct sctp6_sock. On x86, there aren't any extra bytes, but on ARM the ipv6_pinfo structure is aligned on an 8-byte boundary so there were 4 pad bytes that were omitted from the ancestor_size calculation. This would lead to corruption of the pd_lobby pointers, causing an oops when trying to free the sctp structure on socket close. Fixes: 636d25d ("sctp: not copy sctp_sock pd_lobby in sctp_copy_descendant") Signed-off-by: Henry Ptasinski <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 5f6857e ] struct ethtool_fecparam carries bitmasks not bit numbers. We want to return 1 (NONE), not 0. Fixes: 0d08709 ("nfp: implement ethtool FEC mode settings") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit b5b73b2 ] It's possible that the user specifies an interval that couldn't allow any packet to be transmitted. This also avoids the issue of the hrtimer handler starving the other threads because it's running too often. The solution is to reject interval sizes that according to the current link speed wouldn't allow any packet to be transmitted. Reported-by: [email protected] Fixes: 5a781cc ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Vinicius Costa Gomes <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit bb3a420 ] tipc_group_add_to_tree() returns silently if `key` matches `nkey` of an existing node, causing tipc_group_create_member() to leak memory. Let tipc_group_add_to_tree() return an error in such a case, so that tipc_group_create_member() can handle it properly. Fixes: 75da216 ("tipc: introduce communication groups") Reported-and-tested-by: [email protected] Cc: Hillf Danton <[email protected]> Link: https://syzkaller.appspot.com/bug?id=048390604fe1b60df34150265479202f10e13aff Signed-off-by: Peilin Ye <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a4b5cc9 ] I confirmed that the problem fixed by commit 2a63866 ("tipc: fix shutdown() of connectionless socket") also applies to stream socket. ---------- #include <sys/socket.h> #include <unistd.h> #include <sys/wait.h> int main(int argc, char *argv[]) { int fds[2] = { -1, -1 }; socketpair(PF_TIPC, SOCK_STREAM /* or SOCK_DGRAM */, 0, fds); if (fork() == 0) _exit(read(fds[0], NULL, 1)); shutdown(fds[0], SHUT_RDWR); /* This must make read() return. */ wait(NULL); /* To be woken up by _exit(). */ return 0; } ---------- Since shutdown(SHUT_RDWR) should affect all processes sharing that socket, unconditionally setting sk->sk_shutdown to SHUTDOWN_MASK will be the right behavior. Signed-off-by: Tetsuo Handa <[email protected]> Acked-by: Ying Xue <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit ff48b62 ] In tipc_buf_append() it may change skb's frag_list, and it causes problems when this skb is cloned. skb_unclone() doesn't really make this skb's flag_list available to change. Shuang Li has reported an use-after-free issue because of this when creating quite a few macvlan dev over the same dev, where the broadcast packets will be cloned and go up to the stack: [ ] BUG: KASAN: use-after-free in pskb_expand_head+0x86d/0xea0 [ ] Call Trace: [ ] dump_stack+0x7c/0xb0 [ ] print_address_description.constprop.7+0x1a/0x220 [ ] kasan_report.cold.10+0x37/0x7c [ ] check_memory_region+0x183/0x1e0 [ ] pskb_expand_head+0x86d/0xea0 [ ] process_backlog+0x1df/0x660 [ ] net_rx_action+0x3b4/0xc90 [ ] [ ] Allocated by task 1786: [ ] kmem_cache_alloc+0xbf/0x220 [ ] skb_clone+0x10a/0x300 [ ] macvlan_broadcast+0x2f6/0x590 [macvlan] [ ] macvlan_process_broadcast+0x37c/0x516 [macvlan] [ ] process_one_work+0x66a/0x1060 [ ] worker_thread+0x87/0xb10 [ ] [ ] Freed by task 3253: [ ] kmem_cache_free+0x82/0x2a0 [ ] skb_release_data+0x2c3/0x6e0 [ ] kfree_skb+0x78/0x1d0 [ ] tipc_recvmsg+0x3be/0xa40 [tipc] So fix it by using skb_unshare() instead, which would create a new skb for the cloned frag and it'll be safe to change its frag_list. The similar things were also done in sctp_make_reassembled_event(), which is using skb_copy(). Reported-by: Shuang Li <[email protected]> Fixes: 37e2216 ("tipc: rename and move message reassembly function") Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…pported [ Upstream commit 6cec022 ] The cited commit creates peer miss group during switchdev mode initialization in order to handle miss packets correctly while in VF LAG mode. This is done regardless of FW support of such groups which could cause rules setups failure later on. Fix by adding FW capability check before creating peer groups/rule. Fixes: ac004b8 ("net/mlx5e: E-Switch, Add peer miss rules") Signed-off-by: Maor Dickman <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Raed Salem <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 8f0bcd1 ] The set of TLS TX global SW counters in mlx5e_tls_sw_stats_desc is updated from all rings by using atomic ops. This set of stats is used only in the FPGA TLS use case, not in the Connect-X TLS one, where regular per-ring counters are used. Do not expose them in the Connect-X use case, as this would cause counter duplication. For example, tx_tls_drop_no_sync_data would appear twice in the ethtool stats. Fixes: d2ead1f ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit d69753f ] Returning "unknown" as a temperature value violates the hwmon interface rules. Appropriate error codes should be returned via device_attribute show instead. These will ultimately be propagated to the user via the file system interface. In addition to the corrected error handling, it is an even better idea to not present the sensor in sysfs at all if it is known that the read will definitely fail. Given that temp1_input is currently the only sensor reported, ensure no hwmon registration if TEMP_MONITOR_QUERY is not supported or if it will fail due to access permissions. Something smarter may be needed if and when other sensors are added. Fixes: 12cce90 ("bnxt_en: fix HWRM error when querying VF temperature") Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a539069 ] All changes related to bp->link_info require the protection of the link_lock mutex. It's not sufficient to rely just on RTNL. Fixes: 163e9ef ("bnxt_en: Fix race when modifying pause settings.") Reviewed-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit dea3663 ] The call to netif_wake_queue() when the TX descriptors were freed was missing. When there are no TX buffers available the TX queue will be stopped, but it was not started again when they are available again, this is fixed in this patch. Fixes: fe1a564 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by: Hauke Mehrtens <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 74c7b80 ] netif_tx_napi_add() should be used for NAPI in the TX direction instead of the netif_napi_add() function. Signed-off-by: Hauke Mehrtens <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit c582a7f ] Use napi_complete_done() and activate the interrupts when this function returns true. This way the generic NAPI code can take care of activating the interrupts. Signed-off-by: Hauke Mehrtens <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 9423361 ] The napi_schedule() call will only schedule the NAPI if it is not already running. To make sure that we do not deactivate interrupts without scheduling NAPI only deactivate the interrupts in case NAPI also gets scheduled. Signed-off-by: Hauke Mehrtens <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit c2b727d ] If we have unbound the PHY driver prior to calling phy_detach() (often via phy_disconnect()) then we can cause a NULL pointer de-reference accessing the driver owner member. The steps to reproduce are: echo unimac-mdio-0:01 > /sys/class/net/eth0/phydev/driver/unbind ip link set eth0 down Fixes: cafe8df ("net: phy: Fix lack of reference count on PHY driver") Signed-off-by: Florian Fainelli <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 5116a8a ] When phy_is_started() was added to catch incorrect PHY states, phy_stop() would not be qualified against PHY_DOWN. It is possible to reach that state when the PHY driver has been unbound and the network device is then brought down. Fixes: 2b3e88e ("net: phy: improve phy state checking") Signed-off-by: Florian Fainelli <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 3ca1a42 ] If skb_put_padto() returns an error, skb has been freed. Better not touch it anymore, as reported by syzbot [1] Note to qrtr maintainers : this suggests qrtr_sendmsg() should adjust sock_alloc_send_skb() second parameter to account for the potential added alignment to avoid reallocation. [1] BUG: KASAN: use-after-free in __skb_insert include/linux/skbuff.h:1907 [inline] BUG: KASAN: use-after-free in __skb_queue_before include/linux/skbuff.h:2016 [inline] BUG: KASAN: use-after-free in __skb_queue_tail include/linux/skbuff.h:2049 [inline] BUG: KASAN: use-after-free in skb_queue_tail+0x6b/0x120 net/core/skbuff.c:3146 Write of size 8 at addr ffff88804d8ab3c0 by task syz-executor.4/4316 CPU: 1 PID: 4316 Comm: syz-executor.4 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1d6/0x29e lib/dump_stack.c:118 print_address_description+0x66/0x620 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report+0x132/0x1d0 mm/kasan/report.c:530 __skb_insert include/linux/skbuff.h:1907 [inline] __skb_queue_before include/linux/skbuff.h:2016 [inline] __skb_queue_tail include/linux/skbuff.h:2049 [inline] skb_queue_tail+0x6b/0x120 net/core/skbuff.c:3146 qrtr_tun_send+0x1a/0x40 net/qrtr/tun.c:23 qrtr_node_enqueue+0x44f/0xc00 net/qrtr/qrtr.c:364 qrtr_bcast_enqueue+0xbe/0x140 net/qrtr/qrtr.c:861 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45d5b9 Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f84b5b81c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000038b40 RCX: 000000000045d5b9 RDX: 0000000000000055 RSI: 0000000020001240 RDI: 0000000000000003 RBP: 00007f84b5b81ca0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000f R13: 00007ffcbbf86daf R14: 00007f84b5b829c0 R15: 000000000118cf4c Allocated by task 4316: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc+0x100/0x130 mm/kasan/common.c:461 slab_post_alloc_hook+0x3e/0x290 mm/slab.h:518 slab_alloc mm/slab.c:3312 [inline] kmem_cache_alloc+0x1c1/0x2d0 mm/slab.c:3482 skb_clone+0x1b2/0x370 net/core/skbuff.c:1449 qrtr_bcast_enqueue+0x6d/0x140 net/qrtr/qrtr.c:857 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 4316: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xdd/0x110 mm/kasan/common.c:422 __cache_free mm/slab.c:3418 [inline] kmem_cache_free+0x82/0xf0 mm/slab.c:3693 __skb_pad+0x3f5/0x5a0 net/core/skbuff.c:1823 __skb_put_padto include/linux/skbuff.h:3233 [inline] skb_put_padto include/linux/skbuff.h:3252 [inline] qrtr_node_enqueue+0x62f/0xc00 net/qrtr/qrtr.c:360 qrtr_bcast_enqueue+0xbe/0x140 net/qrtr/qrtr.c:861 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff88804d8ab3c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 0 bytes inside of 224-byte region [ffff88804d8ab3c0, ffff88804d8ab4a0) The buggy address belongs to the page: page:00000000ea8cccfb refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88804d8abb40 pfn:0x4d8ab flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0002237ec8 ffffea00029b3388 ffff88821bb66800 raw: ffff88804d8abb40 ffff88804d8ab000 000000010000000b 0000000000000000 page dumped because: kasan: bad access detected Fixes: ce57785 ("net: qrtr: fix len of skb_put_padto in qrtr_node_enqueue") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Cc: Carl Huang <[email protected]> Cc: Wen Gong <[email protected]> Cc: Bjorn Andersson <[email protected]> Cc: Manivannan Sadhasivam <[email protected]> Acked-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 4a009cb ] skb_put_padto() and __skb_put_padto() callers must check return values or risk use-after-free. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit e3336ca upstream. We've met softlockup with "CONFIG_PREEMPT_NONE=y", when the target memcg doesn't have any reclaimable memory. It can be easily reproduced as below: watchdog: BUG: soft lockup - CPU#0 stuck for 111s![memcg_test:2204] CPU: 0 PID: 2204 Comm: memcg_test Not tainted 5.9.0-rc2+ Freescale#12 Call Trace: shrink_lruvec+0x49f/0x640 shrink_node+0x2a6/0x6f0 do_try_to_free_pages+0xe9/0x3e0 try_to_free_mem_cgroup_pages+0xef/0x1f0 try_charge+0x2c1/0x750 mem_cgroup_charge+0xd7/0x240 __add_to_page_cache_locked+0x2fd/0x370 add_to_page_cache_lru+0x4a/0xc0 pagecache_get_page+0x10b/0x2f0 filemap_fault+0x661/0xad0 ext4_filemap_fault+0x2c/0x40 __do_fault+0x4d/0xf9 handle_mm_fault+0x1080/0x1790 It only happens on our 1-vcpu instances, because there's no chance for oom reaper to run to reclaim the to-be-killed process. Add a cond_resched() at the upper shrink_node_memcgs() to solve this issue, this will mean that we will get a scheduling point for each memcg in the reclaimed hierarchy without any dependency on the reclaimable memory in that memcg thus making it more predictable. Suggested-by: Michal Hocko <[email protected]> Signed-off-by: Xunlei Pang <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Acked-by: Chris Down <[email protected]> Acked-by: Michal Hocko <[email protected]> Acked-by: Johannes Weiner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Julius Hemanth Pitti <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit e52d58d upstream. When using 128-bit interrupt-remapping table entry (IRTE) (a.k.a GA mode), current driver disables interrupt remapping when it updates the IRTE so that the upper and lower 64-bit values can be updated safely. However, this creates a small window, where the interrupt could arrive and result in IO_PAGE_FAULT (for interrupt) as shown below. IOMMU Driver Device IRQ ============ =========== irte.RemapEn=0 ... change IRTE IRQ from device ==> IO_PAGE_FAULT !! ... irte.RemapEn=1 This scenario has been observed when changing irq affinity on a system running I/O-intensive workload, in which the destination APIC ID in the IRTE is updated. Instead, use cmpxchg_double() to update the 128-bit IRTE at once without disabling the interrupt remapping. However, this means several features, which require GA (128-bit IRTE) support will also be affected if cmpxchg16b is not supported (which is unprecedented for AMD processors w/ IOMMU). Fixes: 880ac60 ("iommu/amd: Introduce interrupt remapping ops structure") Reported-by: Sean Osborne <[email protected]> Signed-off-by: Suravee Suthikulpanit <[email protected]> Tested-by: Erik Rockstrom <[email protected]> Reviewed-by: Joao Martins <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Tested-by: Jon Hunter <[email protected]> Tested-by: Shuah Khan <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Guenter Roeck <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

This is the 5.4.68 stable release Signed-off-by: Andrey Zhizhikin <[email protected]>

commit 8b59b0a upstream. arm32 uses software to simulate the instruction replaced by kprobe. some instructions may be simulated by constructing assembly functions. therefore, before executing instruction simulation, it is necessary to construct assembly function execution environment in C language through binding registers. after kasan is enabled, the register binding relationship will be destroyed, resulting in instruction simulation errors and causing kernel panic. the kprobe emulate instruction function is distributed in three files: actions-common.c actions-arm.c actions-thumb.c, so disable KASAN when compiling these files. for example, use kprobe insert on cap_capable+20 after kasan enabled, the cap_capable assembly code is as follows: <cap_capable>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e1a05000 mov r5, r0 e280006c add r0, r0, Freescale#108 ; 0x6c e1a04001 mov r4, r1 e1a06002 mov r6, r2 e59fa090 ldr sl, [pc, Freescale#144] ; ebfc7bf8 bl c03aa4b4 <__asan_load4> e595706c ldr r7, [r5, Freescale#108] ; 0x6c e2859014 add r9, r5, Freescale#20 ...... The emulate_ldr assembly code after enabling kasan is as follows: c06f1384 <emulate_ldr>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e282803c add r8, r2, Freescale#60 ; 0x3c e1a05000 mov r5, r0 e7e37855 ubfx r7, r5, Freescale#16, Freescale#4 e1a00008 mov r0, r8 e1a09001 mov r9, r1 e1a04002 mov r4, r2 ebf35462 bl c03c6530 <__asan_load4> e357000f cmp r7, Freescale#15 e7e36655 ubfx r6, r5, Freescale#12, Freescale#4 e205a00f and sl, r5, Freescale#15 0a000001 beq c06f13bc <emulate_ldr+0x38> e0840107 add r0, r4, r7, lsl Freescale#2 ebf3545c bl c03c6530 <__asan_load4> e084010a add r0, r4, sl, lsl Freescale#2 ebf3545a bl c03c6530 <__asan_load4> e2890010 add r0, r9, Freescale#16 ebf35458 bl c03c6530 <__asan_load4> e5990010 ldr r0, [r9, Freescale#16] e12fff30 blx r0 e356000f cm r6, Freescale#15 1a000014 bne c06f1430 <emulate_ldr+0xac> e1a06000 mov r6, r0 e2840040 add r0, r4, Freescale#64 ; 0x40 ...... when running in emulate_ldr to simulate the ldr instruction, panic occurred, and the log is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000090 pgd = ecb46400 [00000090] *pgd=2e0fa003, *pmd=00000000 Internal error: Oops: 206 [Freescale#1] SMP ARM PC is at cap_capable+0x14/0xb0 LR is at emulate_ldr+0x50/0xc0 psr: 600d0293 sp : ecd63af8 ip : 00000004 fp : c0a7c30c r10: 00000000 r9 : c30897f4 r8 : ecd63cd4 r7 : 0000000f r6 : 0000000a r5 : e59fa090 r4 : ecd63c98 r3 : c06ae294 r2 : 00000000 r1 : b7611300 r0 : bf4ec008 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 32c5387d Table: 2d546400 DAC: 55555555 Process bash (pid: 1643, stack limit = 0xecd60190) (cap_capable) from (kprobe_handler+0x218/0x340) (kprobe_handler) from (kprobe_trap_handler+0x24/0x48) (kprobe_trap_handler) from (do_undefinstr+0x13c/0x364) (do_undefinstr) from (__und_svc_finish+0x0/0x30) (__und_svc_finish) from (cap_capable+0x18/0xb0) (cap_capable) from (cap_vm_enough_memory+0x38/0x48) (cap_vm_enough_memory) from (security_vm_enough_memory_mm+0x48/0x6c) (security_vm_enough_memory_mm) from (copy_process.constprop.5+0x16b4/0x25c8) (copy_process.constprop.5) from (_do_fork+0xe8/0x55c) (_do_fork) from (SyS_clone+0x1c/0x24) (SyS_clone) from (__sys_trace_return+0x0/0x10) Code: 0050a0e1 6c0080e2 0140a0e1 0260a0e1 (f801f0e7) Fixes: 35aa1df ("ARM kprobes: instruction single-stepping support") Fixes: 4210157 ("ARM: 9017/2: Enable KASan for ARM") Signed-off-by: huangshaobo <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Russell King (Oracle) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…ower_limit() [ Upstream commit 117dbed ] There is a global-out-of-bounds reported by KASAN: BUG: KASAN: global-out-of-bounds in _rtl8812ae_eq_n_byte.part.0+0x3d/0x84 [rtl8821ae] Read of size 1 at addr ffffffffa0773c43 by task NetworkManager/411 CPU: 6 PID: 411 Comm: NetworkManager Tainted: G D 6.1.0-rc8+ Freescale#144 e15588508517267d37 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), Call Trace: <TASK> ... kasan_report+0xbb/0x1c0 _rtl8812ae_eq_n_byte.part.0+0x3d/0x84 [rtl8821ae] rtl8821ae_phy_bb_config.cold+0x346/0x641 [rtl8821ae] rtl8821ae_hw_init+0x1f5e/0x79b0 [rtl8821ae] ... </TASK> The root cause of the problem is that the comparison order of "prate_section" in _rtl8812ae_phy_set_txpower_limit() is wrong. The _rtl8812ae_eq_n_byte() is used to compare the first n bytes of the two strings from tail to head, which causes the problem. In the _rtl8812ae_phy_set_txpower_limit(), it was originally intended to meet this requirement by carefully designing the comparison order. For example, "pregulation" and "pbandwidth" are compared in order of length from small to large, first is 3 and last is 4. However, the comparison order of "prate_section" dose not obey such order requirement, therefore when "prate_section" is "HT", when comparing from tail to head, it will lead to access out of bounds in _rtl8812ae_eq_n_byte(). As mentioned above, the _rtl8812ae_eq_n_byte() has the same function as strcmp(), so just strcmp() is enough. Fix it by removing _rtl8812ae_eq_n_byte() and use strcmp() barely. Although it can be fixed by adjusting the comparison order of "prate_section", this may cause the value of "rate_section" to not be from 0 to 5. In addition, commit "21e4b0726dc6" not only moved driver from staging to regular tree, but also added setting txpower limit function during the driver config phase, so the problem was introduced by this commit. Fixes: 21e4b07 ("rtlwifi: rtl8821ae: Move driver from staging to regular tree") Signed-off-by: Li Zetao <[email protected]> Acked-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>

@offset

commit 59090e4 upstream. Since commit 946fa0d ("mm/slub: extend redzone check to extra allocated kmalloc space than requested"), setting orig_size treats the wasted space (object_size - orig_size) as a redzone. However with init_on_free=1 we clear the full object->size, including the redzone. Additionally we clear the object metadata, including the stored orig_size, making it zero, which makes check_object() treat the whole object as a redzone. These issues lead to the following BUG report with "slub_debug=FUZ init_on_free=1": [ 0.000000] ============================================================================= [ 0.000000] BUG kmalloc-8 (Not tainted): kmalloc Redzone overwritten [ 0.000000] ----------------------------------------------------------------------------- [ 0.000000] [ 0.000000] 0xffff000010032858-0xffff00001003285f @offset=2136. First byte 0x0 instead of 0xcc [ 0.000000] FIX kmalloc-8: Restoring kmalloc Redzone 0xffff000010032858-0xffff00001003285f=0xcc [ 0.000000] Slab 0xfffffdffc0400c80 objects=36 used=23 fp=0xffff000010032a18 flags=0x3fffe0000000200(workingset|node=0|zone=0|lastcpupid=0x1ffff) [ 0.000000] Object 0xffff000010032858 @offset=2136 fp=0xffff0000100328c8 [ 0.000000] [ 0.000000] Redzone ffff000010032850: cc cc cc cc cc cc cc cc ........ [ 0.000000] Object ffff000010032858: cc cc cc cc cc cc cc cc ........ [ 0.000000] Redzone ffff000010032860: cc cc cc cc cc cc cc cc ........ [ 0.000000] Padding ffff0000100328b4: 00 00 00 00 00 00 00 00 00 00 00 00 ............ [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.11.0-rc3-next-20240814-00004-g61844c55c3f4 #144 [ 0.000000] Hardware name: NXP i.MX95 19X19 board (DT) [ 0.000000] Call trace: [ 0.000000] dump_backtrace+0x90/0xe8 [ 0.000000] show_stack+0x18/0x24 [ 0.000000] dump_stack_lvl+0x74/0x8c [ 0.000000] dump_stack+0x18/0x24 [ 0.000000] print_trailer+0x150/0x218 [ 0.000000] check_object+0xe4/0x454 [ 0.000000] free_to_partial_list+0x2f8/0x5ec To address the issue, use orig_size to clear the used area. And restore the value of orig_size after clear the remaining area. When CONFIG_SLUB_DEBUG not defined, (get_orig_size()' directly returns s->object_size. So when using memset to init the area, the size can simply be orig_size, as orig_size returns object_size when CONFIG_SLUB_DEBUG not enabled. And orig_size can never be bigger than object_size. Fixes: 946fa0d ("mm/slub: extend redzone check to extra allocated kmalloc space than requested") Cc: <[email protected]> Reviewed-by: Feng Tang <[email protected]> Acked-by: David Rientjes <[email protected]> Signed-off-by: Peng Fan <[email protected]> Signed-off-by: Vlastimil Babka <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit a4faee0 upstream. When unbind and bind the device again, kernel will dump below warning: [ 173.972130] sysfs: cannot create duplicate filename '/devices/platform/soc/4c010010.usb/software_node' [ 173.981564] CPU: 2 UID: 0 PID: 536 Comm: sh Not tainted 6.12.0-rc6-06344-g2aed7c4a5c56 #144 [ 173.989923] Hardware name: NXP i.MX95 15X15 board (DT) [ 173.995062] Call trace: [ 173.997509] dump_backtrace+0x90/0xe8 [ 174.001196] show_stack+0x18/0x24 [ 174.004524] dump_stack_lvl+0x74/0x8c [ 174.008198] dump_stack+0x18/0x24 [ 174.011526] sysfs_warn_dup+0x64/0x80 [ 174.015201] sysfs_do_create_link_sd+0xf0/0xf8 [ 174.019656] sysfs_create_link+0x20/0x40 [ 174.023590] software_node_notify+0x90/0x100 [ 174.027872] device_create_managed_software_node+0xec/0x108 ... The '4c010010.usb' device is a platform device created during the initcall and is never removed, which causes its associated software node to persist indefinitely. The existing device_create_managed_software_node() does not provide a corresponding removal function. Replace device_create_managed_software_node() with the device_add_software_node() and device_remove_software_node() pair to ensure proper addition and removal of software nodes, addressing this issue. Fixes: a9400f1 ("usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode") Cc: [email protected] Reviewed-by: Frank Li <[email protected]> Signed-off-by: Xu Yang <[email protected]> Acked-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

salyzyn and others added 30 commits September 26, 2020 18:03

Tariq Toukan and others added 15 commits September 26, 2020 18:03

Merge tag 'v5.4.68' into 5.4-2.1.x-imx

11f569d

This is the 5.4.68 stable release Signed-off-by: Andrey Zhizhikin <[email protected]>

otavio merged commit 18d6ddd into Freescale:5.4-2.1.x-imx Sep 29, 2020

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update 5.4-2.1.x-imx to v5.4.68 from stable #144

Update 5.4-2.1.x-imx to v5.4.68 from stable #144

zandrey commented Sep 27, 2020

Update 5.4-2.1.x-imx to v5.4.68 from stable #144

Update 5.4-2.1.x-imx to v5.4.68 from stable #144

Conversation

zandrey commented Sep 27, 2020