XboxOneDev

Collection of tests, ideas, and whatever code we want relating to Xbox One peripherals.

USB Information

The Xbox One controller has a single USB configuration (1), and two altinterface settings for each of the three (3) interfaces that that configuration supplies.

idVendor(MSFT): 0x045E idProduct: 0x02D1

The controller, unlike the 360, does not spit out button state, HID-like reports over the interrupt pipe automatically. That IS what the pipe is for, but there are seemingly two(or more) byte binary messages sent over the output interrupt pipe that enable or disable features or state.

Message	Effect
E4 60	Turn X LED on?

Device Descriptor

    Descriptor Version Number:   0x0200
    Device Class:   255   (Vendor-specific)
    Device Subclass:   71   (Vendor-specific)
    Device Protocol:   208
    Device MaxPacketSize:   64
    Device VendorID/ProductID:   0x045E/0x02D1   (Microsoft Corporation)
    Device Version Number:   0x0101
    Number of Configurations:   1
    Manufacturer String:   1 "Microsoft"
    Product String:   2 "Controller"
    Serial Number String:   3 "7EED8304C69E"

Interface Descriptors

Interface #1 - Vendor-specific (#1)
    Alternate Setting   1
    Number of Endpoints   2
    Interface Class:   255   (Vendor-specific)
    Interface Subclass;   71   (Vendor-specific)
    Interface Protocol:   208
    Endpoint 0x02 - Isochronous Output
        Address:   0x02  (OUT)
        Attributes:   0x01  (Isochronous no synchronization data endpoint)
        Max Packet Size:   228
        Polling Interval:   1 ms
    Endpoint 0x82 - Isochronous Input
        Address:   0x82  (IN)
        Attributes:   0x01  (Isochronous no synchronization data endpoint)
        Max Packet Size:   228
        Polling Interval:   1 ms

Interface #1 - Vendor-specific (#1)
    Alternate Setting   1
    Number of Endpoints   2
    Interface Class:   255   (Vendor-specific)
    Interface Subclass;   71   (Vendor-specific)
    Interface Protocol:   208
    Endpoint 0x02 - Isochronous Output
        Address:   0x02  (OUT)
        Attributes:   0x01  (Isochronous no synchronization data endpoint)
        Max Packet Size:   228
        Polling Interval:   1 ms
    Endpoint 0x82 - Isochronous Input
        Address:   0x82  (IN)
        Attributes:   0x01  (Isochronous no synchronization data endpoint)
        Max Packet Size:   228
        Polling Interval:   1 ms

Interface #2 - Vendor-specific (#1)
    Alternate Setting   1
    Number of Endpoints   2
    Interface Class:   255   (Vendor-specific)
    Interface Subclass;   71   (Vendor-specific)
    Interface Protocol:   208
    Endpoint 0x03 - Bulk Output
        Address:   0x03  (OUT)
        Attributes:   0x02  (Bulk no synchronization data endpoint)
        Max Packet Size:   64
        Polling Interval:   0 ms
    Endpoint 0x83 - Bulk Input
        Address:   0x83  (IN)
        Attributes:   0x02  (Bulk no synchronization data endpoint)
        Max Packet Size:   64
        Polling Interval:   0 ms

As you can see, I've only listed descriptors from altinterface 1, because in altinterface 0, the first interface is identical, and the rest have 0 endpoints (minimalistic config maybe?)