Merge pull request #6235 from NREL/HighCondMaterialFatalForFiniteDiff

Fatal for High Cond Material for Finite Diff

src/EnergyPlus/DataHeatBalance.hh

@@ -330,7 +330,7 @@ namespace DataHeatBalance {
 	//                           !       Taking the still gas thermal conductivity for air at 0.0267 W/m-K (at 300K), then
 	//                           !       this limit of 1.0 corresponds to a completely still layer of air that is around 0.025 m thick
 	//                           !  5) The previous limit of 0.1 (before ver. 3.1) caused loads initialization problems in test files
-	extern Real64 HighHConvLimit; // upper limit for HConv, mostly used for user input limits in practics. !W/m2-K
+	extern Real64 HighHConvLimit; // upper limit for HConv, mostly used for user input limits in practice. !W/m2-K
 	extern Real64 MaxAllowedDelTempCondFD; // Convergence criteria for inside surface temperatures for CondFD
 
 	extern std::string BuildingName; // Name of building
@@ -702,7 +702,7 @@ namespace DataHeatBalance {
 		Real64 MoistBCoeff; // Moisture Equation Coefficient b
 		Real64 MoistCCoeff; // Moisture Equation Coefficient c
 		Real64 MoistDCoeff; // Moisture Equation Coefficient d
-		Real64 EMPDSurfaceDepth; // Surface-layer penetrtion depth (m)
+		Real64 EMPDSurfaceDepth; // Surface-layer penetration depth (m)
 		Real64 EMPDDeepDepth; // Deep-layer penetration depth (m)
 		Real64 EMPDCoatingThickness; // Coating Layer Thickness (m)
 		Real64 EMPDmuCoating; // Coating Layer water vapor diffusion resistance factor (dimensionless)
@@ -743,7 +743,7 @@ namespace DataHeatBalance {
 		Real64 SpecTemp; // Temperature corresponding to the specified material properties
 		int TCParent; // Reference to the parent object WindowMaterial:Glazing:Thermochromic
 		// Simple Glazing System
-		Real64 SimpleWindowUfactor; // user input for simple window U-factor with film coefs (W/m2-k)
+		Real64 SimpleWindowUfactor; // user input for simple window U-factor with film coeffs (W/m2-k)
 		Real64 SimpleWindowSHGC; // user input for simple window Solar Heat Gain Coefficient (non-dimensional)
 		Real64 SimpleWindowVisTran; // (optional) user input for simple window Visual Transmittance (non-dimensional)
 		bool SimpleWindowVTinputByUser; // false means not input, true means user provide VT input
@@ -781,17 +781,17 @@ namespace DataHeatBalance {
 		Real64 ScreenWireSpacing; // insect screen wire spacing
 		Real64 ScreenWireDiameter; // insect screen wire diameter
 		Real64 SlatWidth; // slat width
-		Real64 SlatSeparation; // slat seperation
+		Real64 SlatSeparation; // slat separation
 		Real64 SlatCrown; // slat crown
 		Real64 SlatAngle; // slat angle
 		int SlatAngleType; // slat angle control type, 0=fixed, 1=maximize solar, 2=block beam
-		int SlatOrientation; // horizontal or veritical
+		int SlatOrientation; // horizontal or vertical
 		std::string GasName; // Name of gas type ("Air", "Argon", "Krypton", "Xenon")
 		HysteresisPhaseChange::HysteresisPhaseChange * phaseChange = nullptr;
 		bool GlassSpectralAndAngle; // if SpectralAndAngle is an entered choice
 		int GlassSpecAngTransDataPtr; // Data set index of transmittance as a function of spectral and angle associated with a window glass material
-		int GlassSpecAngFRefleDataPtr; // Data set index of front reflectance as a function of spectral and angle associated with a window glass material 
-		int GlassSpecAngBRefleDataPtr; // Data set index of back reflectance as a function of spectral and angle associated with a window glass material 
+		int GlassSpecAngFRefleDataPtr; // Data set index of front reflectance as a function of spectral and angle associated with a window glass material
+		int GlassSpecAngBRefleDataPtr; // Data set index of back reflectance as a function of spectral and angle associated with a window glass material
 
 		// Default Constructor
 		MaterialProperties() :
@@ -950,7 +950,7 @@ namespace DataHeatBalance {
 			SlatOrientation( 0 ),
 			GlassSpectralAndAngle( false ),
 			GlassSpecAngTransDataPtr( 0 ),
-			GlassSpecAngFRefleDataPtr( 0 ), 
+			GlassSpecAngFRefleDataPtr( 0 ),
 			GlassSpecAngBRefleDataPtr( 0 )
 		{}
 
@@ -962,7 +962,7 @@ namespace DataHeatBalance {
 		std::string Name; // Name
 		int NumGlzMat; // Number of TC glazing materials
 		Array1D_int LayerPoint; // Layer pointer
-		Array1D< Real64 > SpecTemp; // Temperature corresponding to the specified TC glaing optical data
+		Array1D< Real64 > SpecTemp; // Temperature corresponding to the specified TC glazing optical data
 		Array1D_string LayerName; // Name of the referenced WindowMaterial:Glazing object
 
 		// Default Constructor
@@ -1124,7 +1124,7 @@ namespace DataHeatBalance {
 		//For CFactor underground walls
 		Real64 CFactor;
 		Real64 Height;
-		//For FFactor slabs-on-grade or undeerground floors
+		//For FFactor slabs-on-grade or underground floors
 		Real64 FFactor;
 		Real64 Area;
 		Real64 PerimeterExposed;
@@ -1349,7 +1349,7 @@ namespace DataHeatBalance {
 		bool RefrigCaseRA; // TRUE means there is potentially heat removal from return air
 		// from refrigeration cases for this zone
 		Real64 InternalHeatGains; // internal loads (W)
-		Real64 NominalInfilVent; // internal infiltration/ventilaton
+		Real64 NominalInfilVent; // internal infiltration/ventilation
 		Real64 NominalMixing; // internal mixing/cross mixing
 		bool TempOutOfBoundsReported; // if any temp out of bounds errors, first will show zone details.
 		bool EnforcedReciprocity; // if zone required forced reciprocity --
@@ -1365,11 +1365,11 @@ namespace DataHeatBalance {
 		Real64 ZoneVolCapMultpCO2; // Zone carbon dioxide capacity multiplier
 		Real64 ZoneVolCapMultpGenContam; // Zone generic contaminant capacity multiplier
 		Real64 ZoneVolCapMultpSensHM; // Calculated temperature capacity multiplier by hybrid model
-		Real64 ZoneVolCapMultpSensHMSum; // for temperature capacity multiplier average calcualtion
-		Real64 ZoneVolCapMultpSensHMCountSum; // for temperature capacity multiplier average calcualtion
+		Real64 ZoneVolCapMultpSensHMSum; // for temperature capacity multiplier average calculation
+		Real64 ZoneVolCapMultpSensHMCountSum; // for temperature capacity multiplier average calculation
 		Real64 ZoneVolCapMultpSensHMAverage; // Temperature capacity multiplier average
-		Real64 MCPIHM; // Calcualted mass flow rate by hybrid model
-		Real64 InfilOAAirChangeRateHM; // Calcualted infilgration air change per hour by hybrid model
+		Real64 MCPIHM; // Calculated mass flow rate by hybrid model
+		Real64 InfilOAAirChangeRateHM; // Calculated infiltration air change per hour by hybrid model
 
 		// Default Constructor
 		ZoneData() :
@@ -1386,7 +1386,7 @@ namespace DataHeatBalance {
 			UserEnteredFloorArea( AutoCalculate ),
 			FloorArea( 0.0 ),
 			CalcFloorArea( 0.0 ),
-			CeilingArea( 0.0 ), 
+			CeilingArea( 0.0 ),
 			HasFloor( false ),
 			HasRoof( false ),
 			HasInterZoneWindow( false ),
@@ -1826,7 +1826,7 @@ namespace DataHeatBalance {
 		Real64 AirVolFlowCurDensity; // Air volume flow rate at current density [m3/s]
 		Real64 AirMassFlow; // Air mass flow rate [kg/s]
 		Real64 AirInletDryBulbT; // Air inlet dry-bulb temperature [C]
-		Real64 AirInletDewpointT; // Air inlet dewpoit temperature [C]
+		Real64 AirInletDewpointT; // Air inlet dewpoint temperature [C]
 		Real64 AirInletRelHum; // Air inlet relative humidity [%]
 		Real64 AirOutletDryBulbT; // Air outlet dry-bulb temperature [C]
 		Real64 SHI; // Supply Heat Index []
@@ -2131,11 +2131,11 @@ namespace DataHeatBalance {
 		int InducedAirSchedPtr; // Induced Outdoor Air Fraction Schedule
 		Real64 BalMassFlowRate; // balanced mass flow rate
 		Real64 InfMassFlowRate; // unbalanced mass flow rate from infiltration
-		Real64 NatMassFlowRate; // unbalanced mass flow rate from natural ventilaton
-		Real64 ExhMassFlowRate; // unbalanced mass flow rate from exhaust ventilaton
-		Real64 IntMassFlowRate; // unbalanced mass flow rate from intake ventilaton
-		Real64 ERVMassFlowRate; // unbalanced mass flow rate from stand-alond ERV
-		bool OneTimeFlag; // One time flag to get nodes of stand alond ERV
+		Real64 NatMassFlowRate; // unbalanced mass flow rate from natural ventilation
+		Real64 ExhMassFlowRate; // unbalanced mass flow rate from exhaust ventilation
+		Real64 IntMassFlowRate; // unbalanced mass flow rate from intake ventilation
+		Real64 ERVMassFlowRate; // unbalanced mass flow rate from stand-alone ERV
+		bool OneTimeFlag; // One time flag to get nodes of stand alone ERV
 		int NumOfERVs; // Number of zone stand alone ERVs
 		Array1D_int ERVInletNode; // Stand alone ERV supply air inlet nodes
 		Array1D_int ERVExhaustNode; // Stand alone ERV air exhaust nodes
@@ -2241,7 +2241,7 @@ namespace DataHeatBalance {
 		bool EnforceZoneMassBalance;     // flag to enforce zone air mass conservation
 		bool BalanceMixing;              // flag to allow mixing to be adjusted for zone mass balance
 		int InfiltrationTreatment;       // determines how infiltration is treated for zone mass balance
-		int InfiltrationZoneType;        // specifies which types of zones allo infiltration to be changed
+		int InfiltrationZoneType;        // specifies which types of zones allow infiltration to be changed
 		//Note, unique global object
 
 		// Default Constructor
@@ -2303,7 +2303,7 @@ namespace DataHeatBalance {
 		Reference< Real64 > PtrConvectGainRate; // fortan POINTER to value of convection heat gain rate for device, watts
 		Real64 ConvectGainRate; // current timestep value of convection heat gain rate for device, watts
 		Reference< Real64 > PtrReturnAirConvGainRate; // fortan POINTER to value of return air convection heat gain rate for device, W
-		Real64 ReturnAirConvGainRate; // urrent timestep value of return air convection heat gain rate for device, W
+		Real64 ReturnAirConvGainRate; // current timestep value of return air convection heat gain rate for device, W
 		Reference< Real64 > PtrRadiantGainRate; // fortan POINTER to value of thermal radiation heat gain rate for device, watts
 		Real64 RadiantGainRate; // current timestep value of thermal radiation heat gain rate for device, watts
 		Reference< Real64 > PtrLatentGainRate; // fortan POINTER to value of moisture gain rate for device, Watts
@@ -2344,7 +2344,7 @@ namespace DataHeatBalance {
 		Real64 QLTCRA; // ENERGY CONVECTED TO RETURN AIR FROM LIGHTS
 		Real64 QLTSW; // VISIBLE ENERGY FROM LIGHTS
 		Real64 QEECON; // ENERGY CONVECTED FROM ELECTRIC EQUIPMENT
-		Real64 QEERAD; // ENERCY RADIATED FROM ELECTRIC EQUIPMENT
+		Real64 QEERAD; // ENERGY RADIATED FROM ELECTRIC EQUIPMENT
 		Real64 QEELost; // Energy from Electric Equipment (lost)
 		Real64 QEELAT; // LATENT ENERGY FROM Electric Equipment
 		Real64 QGECON; // ENERGY CONVECTED FROM GAS EQUIPMENT
@@ -2803,7 +2803,7 @@ namespace DataHeatBalance {
 		Real64 VentilVolumeCurDensity; // Volume of Air {m3} due to ventilation at current zone air density
 		Real64 VentilVolumeStdDensity; // Volume of Air {m3} due to ventilation at standard density (adjusted for elevation)
 		Real64 VentilVdotCurDensity; // Volume flow rate of Air {m3/s} due to ventilation at current zone air density
-		Real64 VentilVdotStdDensity; // Volume flowr of Air {m3/s} due to ventilation at standard density (adjusted elevation)
+		Real64 VentilVdotStdDensity; // Volume flow rate of Air {m3/s} due to ventilation at standard density (adjusted elevation)
 		Real64 VentilMass; // Mass of Air {kg} due to ventilation
 		Real64 VentilMdot; // Mass flow rate of Air {kg/s} due to ventilation
 		Real64 VentilAirChangeRate; // Ventilation air change rate (ach)
@@ -2931,9 +2931,9 @@ namespace DataHeatBalance {
 		Real64 NumOccAccum; // number of occupants accumulating for entire simulation
 		Real64 NumOccAccumTime; // time that the number of occupants is accumulating to compute average
 		//  - zone time step
-		Real64 TotTimeOcc; // time occuped (and the mechnical ventilation volume is accumulating)
+		Real64 TotTimeOcc; // time occupied (and the mechanical ventilation volume is accumulating)
 		//  - system time step
-		Real64 MechVentVolTotal; // volume for mechnical ventilation of outside air for entire simulation
+		Real64 MechVentVolTotal; // volume for mechanical ventilation of outside air for entire simulation
 		Real64 MechVentVolMin; // a large number since finding minimum volume
 		Real64 InfilVolTotal; // volume for infiltration of outside air for entire simulation
 		Real64 InfilVolMin; // a large number since finding minimum volume
@@ -2946,11 +2946,11 @@ namespace DataHeatBalance {
 		Real64 SHGSAnHvacHt; // hvac air heating
 		Real64 SHGSAnHvacCl; // hvac air cooling
 		Real64 SHGSAnHvacATUHt; // heating by Air Terminal Unit [J]
-		Real64 SHGSAnHvacATUCl; // coolinging by Air Terminal Unit [J]
+		Real64 SHGSAnHvacATUCl; // cooling by Air Terminal Unit [J]
 		Real64 SHGSAnSurfHt; // heated surface heating
 		Real64 SHGSAnSurfCl; // cooled surface cooling
 		Real64 SHGSAnPeoplAdd; // people additions
-		Real64 SHGSAnLiteAdd; // lighing addition
+		Real64 SHGSAnLiteAdd; // lighting addition
 		Real64 SHGSAnEquipAdd; // equipment addition
 		Real64 SHGSAnWindAdd; // window addition
 		Real64 SHGSAnIzaAdd; // inter zone air addition
@@ -2971,7 +2971,7 @@ namespace DataHeatBalance {
 		Real64 SHGSClSurfHt; // heated surface heating
 		Real64 SHGSClSurfCl; // cooled surface cooling
 		Real64 SHGSClPeoplAdd; // people additions
-		Real64 SHGSClLiteAdd; // lighing addition
+		Real64 SHGSClLiteAdd; // lighting addition
 		Real64 SHGSClEquipAdd; // equipment addition
 		Real64 SHGSClWindAdd; // window addition
 		Real64 SHGSClIzaAdd; // inter zone air addition
@@ -2992,7 +2992,7 @@ namespace DataHeatBalance {
 		Real64 SHGSHtSurfHt; // heated surface heating
 		Real64 SHGSHtSurfCl; // cooled surface cooling
 		Real64 SHGSHtPeoplAdd; // people additions
-		Real64 SHGSHtLiteAdd; // lighing addition
+		Real64 SHGSHtLiteAdd; // lighting addition
 		Real64 SHGSHtEquipAdd; // equipment addition
 		Real64 SHGSHtWindAdd; // window addition
 		Real64 SHGSHtIzaAdd; // inter zone air addition
@@ -3188,14 +3188,14 @@ namespace DataHeatBalance {
 		Real64 ITEqUPSPower; // Zone ITE UPS Electric Power [W]
 		Real64 ITEqCPUPowerAtDesign; // Zone ITE CPU Electric Power at Design Inlet Conditions [W]
 		Real64 ITEqFanPowerAtDesign; // Zone ITE Fan Electric Power at Design Inlet Conditions [W]
-		Real64 ITEqUPSGainRateToZone; // Zone ITE UPS Heat Gain toZone Rate [W] - convective gain
+		Real64 ITEqUPSGainRateToZone; // Zone ITE UPS Heat Gain to Zone Rate [W] - convective gain
 		Real64 ITEqConGainRateToZone; // Zone ITE Total Heat Gain toZone Rate [W] - convective gain - includes heat gain from UPS, plus CPU and Fans if room air model not used
 		Real64 ITEqCPUConsumption; // Zone ITE CPU Electric Energy [J]
 		Real64 ITEqFanConsumption; // Zone ITE Fan Electric Energy [J]
 		Real64 ITEqUPSConsumption; // Zone ITE UPS Electric Energy [J]
 		Real64 ITEqCPUEnergyAtDesign; // Zone ITE CPU Electric Energy at Design Inlet Conditions [J]
 		Real64 ITEqFanEnergyAtDesign; // Zone ITE Fan Electric Energy at Design Inlet Conditions [J]
-		Real64 ITEqUPSGainEnergyToZone; // Zone ITE UPS Heat Gain toZone Energy [J] - convective gain
+		Real64 ITEqUPSGainEnergyToZone; // Zone ITE UPS Heat Gain to Zone Energy [J] - convective gain
 		Real64 ITEqConGainEnergyToZone; // Zone ITE Total Heat Gain toZone Energy [J] - convective gain - includes heat gain from UPS, plus CPU and Fans if room air model not used
 		Real64 ITEqAirVolFlowStdDensity; // Zone Air volume flow rate at standard density [m3/s]
 		Real64 ITEqAirMassFlow; // Zone Air mass flow rate [kg/s]