Compatibility

User reported hardware attempted with PAI

Firmware Upgrade WARNING:

Do not upgrade EVO firmware versions to 7.50.000+ if you use Serial connection. Process is irreversible! Paradox introduces serial communication encryption which most probably will break our PAI ability to talk to the panel.

Supported

Other versions may be also supported. If PAI works with your panel, and the model-version combination is not listed, please edit the next table.

Panel		IP module			Conne- ction			Notes
Model	Version	IP100	IP150	IP150+	Local IP	SWAN	Serial
EVOHD	4.50	-	-		-	-	❌	Did not work with ESP32. #198
EVOHD	6.91	-	4.42		✅	-	-
EVOHD	7.30	4.42.002	IP150		✅	-	-
EVOHD	7.31	5.20.0E	-		✅	-	✅	Works with Serial via ESP32
EVO48	2.20	5.10	-		✅	-	-
EVO192	2.66	5.10.06	-		✅	-	-
EVO192	3.20	-	5.3		✅	-	-
EVO192	6.86	5.10	-		✅	-	-
EVO192	6.90	5.1.0	1.32		✅	-	✅
EVO192	7.30	-	1.32		✅	-	✅
EVO192	7.30	-	4.42		✅	-	-
EVO192	7.31.1	-	-	5.02.019	✅	-	-
EVO192	7.31	-	-	5.05	✅	-	-
EVO192	7.52.1	-	1.34.000		✅	-	-	#272 This panel FW has encrypted serial but connects fine via IP150
EVO192	7.70.18	-		5.05.3	✅	-	-	#272 This panel FW has encrypted serial but connects fine via IP150
MG5000	4.16.20	-	4.40		✅	-	-
MG5000	4.8.0	-		5.03	✅	-	-
MG5050	4.96	-	4.40		✅	-	✅
MG5050	4.72	-	1.26		✅	-	-
MG5050	6.80	-	4.40		✅	-	✅
MG5050	7.15.2	-	4.40.04		✅	-	-
MG5050	7.01.12	-	5.02.019		✅	-	-
MG5075	1.3.8	-	-		✅	-	✅
SP4000	5.20	-	5.02.019		✅	-	✅
SP5500	2.40.1	-	-		-	-	✅
SP5500	4.54	-	4.42		✅	-	-
SP5500	4.94	-	-		✅	-	✅	Works with Serial via ESP32
SP5500	7.14.2	-	-		✅	-	✅	USB to Serial via FTDI
SP6000	4.15	-	-		-	-	✅
SP6000	4.54	-	-	✅	✅	-	-
SP6000	4.94	-	-	-	-	-	✅
SP6000	6.80	-	5.02		✅	✅	-	More stable with SWAN disabled
SP6000	7.14.2	-	5.02.19	-	✅	-	-
SP7000	5.18	5.20	-		✅	-	-
SP7000	5.20	-	4.40		✅	-	-
SP7000	6.90	-	4.42		✅	-	-
SP7000	7.14.2	-	5.2.9		✅	✅	-

Unsupported:

• MG6250 - unsupported protocol

---

Note:

For simpler table editing you can use https://www.tablesgenerator.com/markdown_tables

Copy only table to the editor. Not the whole page. Use Preview tab before submitting the change.

Features that depend on firmware versions:

EVO192 and EVOHD:

• PGM control requires fw 4.75+