Merge pull request ghoneycutt#311 from hdep/debian8

Add support for Debian8

README.md

@@ -27,6 +27,7 @@ latest Puppet v3, v3 with future parser, v4, v5 and v6.  See `.travis.yml`
 for the exact matrix of supported Puppet and ruby versions.
 
  * Debian 7
+ * Debian 8
  * Debian 9
  * EL 5
  * EL 6

manifests/init.pp

@@ -279,8 +279,7 @@
           $default_sshd_pamauthenticationviakbdint = undef
           $default_service_hasstatus               = true
         }
-        /^[7-8].*/: {
-          # this is debian 7 conf file and suppose to work with debian 8
+        /^7.*/: {
           $default_sshd_config_hostkey             = [ '/etc/ssh/ssh_host_rsa_key' ]
           $default_ssh_config_hash_known_hosts     = 'no'
           $default_sshd_config_xauth_location      = '/usr/bin/xauth'
@@ -302,6 +301,34 @@
           $default_sshd_config_tcp_keepalive       = 'yes'
           $default_sshd_config_permittunnel        = 'no'
         }
+        /^8.*/: {
+
+          $default_ssh_config_hash_known_hosts     = 'yes'
+          $default_ssh_config_forward_x11_trusted  = 'yes'
+          $default_ssh_package_source              = undef
+          $default_ssh_package_adminfile           = undef
+          $default_ssh_sendenv                     = true
+          $default_sshd_config_hostkey = [
+          '/etc/ssh/ssh_host_rsa_key',
+          '/etc/ssh/ssh_host_dsa_key',
+          '/etc/ssh/ssh_host_ecdsa_key',
+          '/etc/ssh/ssh_host_ed25519_key',
+          ]
+          $default_sshd_config_subsystem_sftp      = '/usr/lib/openssh/sftp-server'
+          $default_sshd_config_mode                = '0600'
+          $default_sshd_config_use_dns             = 'yes'
+          $default_sshd_use_pam                    = 'yes'
+          $default_sshd_gssapikeyexchange          = undef
+          $default_sshd_pamauthenticationviakbdint = undef
+          $default_sshd_gssapicleanupcredentials   = undef
+          $default_sshd_acceptenv                  = true
+          $default_sshd_config_xauth_location      = undef
+          $default_sshd_config_serverkeybits       = '1024'
+          $default_sshd_addressfamily              = 'any'
+          $default_sshd_config_tcp_keepalive       = 'yes'
+          $default_sshd_config_permittunnel        = 'no'
+          $default_service_hasstatus               = true
+        }
         default: { fail ("Operating System : ${::operatingsystemrelease} not supported") }
       }
     }

metadata.json

@@ -18,6 +18,7 @@
       "operatingsystem": "Debian",
       "operatingsystemrelease": [
         "7",
+        "8",
         "9"
       ]
     },

spec/classes/init_spec.rb

@@ -45,6 +45,19 @@
       :sshd_config_fixture    => 'sshd_config_debian',
       :ssh_config_fixture     => 'ssh_config_debian',
     },
+    'Debian-8' => {
+      :architecture           => 'x86_64',
+      :osfamily               => 'Debian',
+      :operatingsystemrelease => '8',
+      :ssh_version            => 'OpenSSH_6.7p1',
+      :ssh_version_numeric    => '8.11',
+      :ssh_packages           => ['openssh-server', 'openssh-client'],
+      :sshd_config_mode       => '0600',
+      :sshd_service_name      => 'ssh',
+      :sshd_service_hasstatus => true,
+      :sshd_config_fixture    => 'sshd_config_debian8',
+      :ssh_config_fixture     => 'ssh_config_debian8',
+    },
     'Debian-9' => {
       :architecture           => 'x86_64',
       :osfamily               => 'Debian',

spec/fixtures/ssh_config_debian8

@@ -0,0 +1,61 @@
+# This file is being maintained by Puppet.
+# DO NOT EDIT
+
+# $OpenBSD: ssh_config,v 1.21 2005/12/06 22:38:27 reyk Exp $
+
+# This is the ssh client system-wide configuration file.  See
+# ssh_config(5) for more information.  This file provides defaults for
+# users, and the values can be changed in per-user configuration files
+# or on the command line.
+
+# Configuration data is parsed as follows:
+#  1. command line options
+#  2. user-specific file
+#  3. system-wide file
+# Any configuration value is only changed the first time it is set.
+# Thus, host-specific definitions should be at the beginning of the
+# configuration file, and defaults at the end.
+
+# Site-wide defaults for some commonly used options.  For a comprehensive
+# list of available options, their meanings and defaults, please see the
+# ssh_config(5) man page.
+
+# Host *
+#   ForwardAgent no
+#   ForwardX11 no
+#   RhostsRSAAuthentication no
+#   RSAAuthentication yes
+   PasswordAuthentication yes
+   PubkeyAuthentication yes
+#   HostbasedAuthentication no
+#   BatchMode no
+#   CheckHostIP yes
+#   AddressFamily any
+#   ConnectTimeout 0
+#   StrictHostKeyChecking ask
+#   IdentityFile ~/.ssh/identity
+   IdentityFile ~/.ssh/id_rsa
+   IdentityFile ~/.ssh/id_dsa
+#   Port 22
+   Protocol 2
+#   Cipher 3des
+#   Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
+#   EscapeChar ~
+#   Tunnel no
+#   TunnelDevice any:any
+#   PermitLocalCommand no
+#   HashKnownHosts no
+   HashKnownHosts yes
+   GlobalKnownHostsFile /etc/ssh/ssh_known_hosts
+Host *
+#  GSSAPIAuthentication yes
+  GSSAPIAuthentication yes
+# If this option is set to yes then remote X11 clients will have full access
+# to the original X11 display. As virtually no X11 client supports the untrusted
+# mode correctly we set this to yes.
+  ForwardX11Trusted yes
+  UseRoaming no
+# Send locale-related environment variables
+  SendEnv LANG LANGUAGE LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+  SendEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+  SendEnv LC_IDENTIFICATION LC_ALL

spec/fixtures/sshd_config_debian8

@@ -0,0 +1,141 @@
+# This file is being maintained by Puppet.
+# DO NOT EDIT
+
+# $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options change a
+# default value.
+
+#Port 22
+Port 22
+#Protocol 2,1
+Protocol 2
+#AddressFamily any
+AddressFamily any
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+HostKey /etc/ssh/ssh_host_rsa_key
+HostKey /etc/ssh/ssh_host_dsa_key
+HostKey /etc/ssh/ssh_host_ecdsa_key
+HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+ServerKeyBits 1024
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+SyslogFacility AUTH
+#LogLevel INFO
+LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 120
+LoginGraceTime 120
+#PermitRootLogin yes
+PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+PubkeyAuthentication yes
+#AuthorizedKeysFile .ssh/authorized_keys
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+#PasswordAuthentication yes
+PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+GSSAPIAuthentication yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication mechanism.
+# Depending on your PAM configuration, this may bypass the setting of
+# PasswordAuthentication, PermitEmptyPasswords, and
+# "PermitRootLogin without-password". If you just want the PAM account and
+# session checks to run without PAM authentication, then enable this but set
+# ChallengeResponseAuthentication=no
+#UsePAM no
+UsePAM yes
+
+# Accept locale-related environment variables
+AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+AcceptEnv LC_IDENTIFICATION LC_ALL
+#AllowTcpForwarding yes
+AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+X11Forwarding yes
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+X11UseLocalhost yes
+#PrintMotd yes
+PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+ClientAliveInterval 0
+ClientAliveCountMax 3
+#ShowPatchLevel no
+#UseDNS yes
+UseDNS yes
+#PidFile /var/run/sshd.pid
+#MaxStartups 10:30:100
+#MaxSessions 10
+
+#PermitTunnel no
+PermitTunnel no
+#ChrootDirectory none
+
+# no default banner path
+#Banner none
+Banner none
+
+# override default of no subsystems
+Subsystem sftp /usr/lib/openssh/sftp-server
+