Add support for textured cool plate (#6860)

support textured cool plate
SoftFever · Sep 22, 2024 · 99d4d09 · 99d4d09 · shyblower · Sep 23, 2024
1 parent c28fd55
commit 99d4d09
Show file tree

Hide file tree

Showing 8 changed files with 149 additions and 3 deletions.
diff --git a/resources/images/orca_bed_pct_left.svg b/resources/images/orca_bed_pct_left.svg
diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp
@@ -1803,6 +1803,8 @@ static BambuBedType to_bambu_bed_type(BedType type)
         bambu_bed_type = bbtHighTemperaturePlate;
     else if (type == btPTE)
         bambu_bed_type = bbtTexturedPEIPlate;
+    else if (type == btPCT)
+        bambu_bed_type = bbtCoolPlate;
 
     return bambu_bed_type;
 }

diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp
@@ -823,7 +823,7 @@ static std::vector<std::string> s_Preset_filament_options {
     "filament_flow_ratio", "filament_density", "filament_cost", "filament_minimal_purge_on_wipe_tower",
     "nozzle_temperature", "nozzle_temperature_initial_layer",
     // BBS
-    "cool_plate_temp", "eng_plate_temp", "hot_plate_temp", "textured_plate_temp", "cool_plate_temp_initial_layer", "eng_plate_temp_initial_layer", "hot_plate_temp_initial_layer","textured_plate_temp_initial_layer",
+    "cool_plate_temp", "textured_cool_plate_temp", "eng_plate_temp", "hot_plate_temp", "textured_plate_temp", "cool_plate_temp_initial_layer", "textured_cool_plate_temp_initial_layer", "eng_plate_temp_initial_layer", "hot_plate_temp_initial_layer","textured_plate_temp_initial_layer",
     // "bed_type",
     //BBS:temperature_vitrification
     "temperature_vitrification", "reduce_fan_stop_start_freq","dont_slow_down_outer_wall", "slow_down_for_layer_cooling", "fan_min_speed",

diff --git a/src/libslic3r/Print.cpp b/src/libslic3r/Print.cpp
@@ -128,9 +128,10 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n
         "bridge_acceleration",
         "travel_acceleration",
         "sparse_infill_acceleration",
-        "internal_solid_infill_acceleration"
+        "internal_solid_infill_acceleration",
         // BBS
         "cool_plate_temp_initial_layer",
+        "textured_cool_plate_temp_initial_layer",
         "eng_plate_temp_initial_layer",
         "hot_plate_temp_initial_layer",
         "textured_plate_temp_initial_layer",
@@ -270,6 +271,7 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n
             || opt_key == "single_extruder_multi_material"
             || opt_key == "nozzle_temperature"
             || opt_key == "cool_plate_temp"
+            || opt_key == "textured_cool_plate_temp"
             || opt_key == "eng_plate_temp"
             || opt_key == "hot_plate_temp"
             || opt_key == "textured_plate_temp"

diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
@@ -352,7 +352,8 @@ static const t_config_enum_values s_keys_map_BedType = {
     { "Cool Plate",         btPC },
     { "Engineering Plate",  btEP  },
     { "High Temp Plate",    btPEI  },
-    { "Textured PEI Plate", btPTE }
+    { "Textured PEI Plate", btPTE },
+    { "Textured Cool Plate", btPCT }
 };
 CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(BedType)
 
@@ -665,6 +666,16 @@ void PrintConfigDef::init_fff_params()
     def->max = 300;
     def->set_default_value(new ConfigOptionInts{ 35 });
 
+    def = this->add("textured_cool_plate_temp", coInts);
+    def->label = L("Other layers");
+    def->tooltip = L("Bed temperature for layers except the initial one. "
+        "Value 0 means the filament does not support to print on the Textured Cool Plate");
+    def->sidetext = L("°C");
+    def->full_label = L("Bed temperature");
+    def->min = 0;
+    def->max = 300;
+    def->set_default_value(new ConfigOptionInts{ 40 });
+
     def = this->add("eng_plate_temp", coInts);
     def->label = L("Other layers");
     def->tooltip = L("Bed temperature for layers except the initial one. "
@@ -705,6 +716,16 @@ void PrintConfigDef::init_fff_params()
     def->max = 120;
     def->set_default_value(new ConfigOptionInts{ 35 });
 
+    def = this->add("textured_cool_plate_temp_initial_layer", coInts);
+    def->label = L("Initial layer");
+    def->full_label = L("Initial layer bed temperature");
+    def->tooltip = L("Bed temperature of the initial layer. "
+        "Value 0 means the filament does not support to print on the Textured Cool Plate");
+    def->sidetext = L("°C");
+    def->min = 0;
+    def->max = 120;
+    def->set_default_value(new ConfigOptionInts{ 40 });
+
     def = this->add("eng_plate_temp_initial_layer", coInts);
     def->label = L("Initial layer");
     def->full_label = L("Initial layer bed temperature");
@@ -740,10 +761,12 @@ void PrintConfigDef::init_fff_params()
     def->mode = comSimple;
     def->enum_keys_map = &s_keys_map_BedType;
     def->enum_values.emplace_back("Cool Plate");
+    def->enum_values.emplace_back("Textured Cool Plate");
     def->enum_values.emplace_back("Engineering Plate");
     def->enum_values.emplace_back("High Temp Plate");
     def->enum_values.emplace_back("Textured PEI Plate");
     def->enum_labels.emplace_back(L("Cool Plate"));
+    def->enum_labels.emplace_back(L("Textured Cool Plate"));
     def->enum_labels.emplace_back(L("Engineering Plate"));
     def->enum_labels.emplace_back(L("Smooth PEI Plate / High Temp Plate"));
     def->enum_labels.emplace_back(L("Textured PEI Plate"));

diff --git a/src/libslic3r/PrintConfig.hpp b/src/libslic3r/PrintConfig.hpp
@@ -258,6 +258,7 @@ enum BedType {
     btEP,
     btPEI,
     btPTE,
+    btPCT,
     btCount
 };
 
@@ -324,6 +325,9 @@ static std::string bed_type_to_gcode_string(const BedType type)
     case btPC:
         type_str = "cool_plate";
         break;
+    case btPCT:
+        type_str = "textured_cool_plate";
+        break;
     case btEP:
         type_str = "eng_plate";
         break;
@@ -346,6 +350,9 @@ static std::string get_bed_temp_key(const BedType type)
     if (type == btPC)
         return "cool_plate_temp";
 
+    if (type == btPCT)
+        return "textured_cool_plate_temp";
+
     if (type == btEP)
         return "eng_plate_temp";
 
@@ -363,6 +370,9 @@ static std::string get_bed_temp_1st_layer_key(const BedType type)
     if (type == btPC)
         return "cool_plate_temp_initial_layer";
 
+    if (type == btPCT)
+        return "textured_cool_plate_temp_initial_layer";
+
     if (type == btEP)
         return "eng_plate_temp_initial_layer";
 
@@ -1172,10 +1182,12 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE(
     ((ConfigOptionString,             bed_custom_model))
     ((ConfigOptionEnum<BedType>,      curr_bed_type))
     ((ConfigOptionInts,               cool_plate_temp))
+    ((ConfigOptionInts,               textured_cool_plate_temp))
     ((ConfigOptionInts,               eng_plate_temp))
     ((ConfigOptionInts,               hot_plate_temp)) // hot is short for high temperature
     ((ConfigOptionInts,               textured_plate_temp))
     ((ConfigOptionInts,               cool_plate_temp_initial_layer))
+    ((ConfigOptionInts,               textured_cool_plate_temp_initial_layer))
     ((ConfigOptionInts,               eng_plate_temp_initial_layer))
     ((ConfigOptionInts,               hot_plate_temp_initial_layer)) // hot is short for high temperature
     ((ConfigOptionInts,               textured_plate_temp_initial_layer))

diff --git a/src/slic3r/GUI/PartPlate.cpp b/src/slic3r/GUI/PartPlate.cpp
@@ -5513,6 +5513,7 @@ void PartPlateList::BedTextureInfo::reset()
 
 void PartPlateList::init_bed_type_info()
 {
+	BedTextureInfo::TexturePart pct_part_left(10, 130,  10, 110, "orca_bed_pct_left.svg");
 	BedTextureInfo::TexturePart pc_part1(10, 130,  10, 110, "bbl_bed_pc_left.svg");
 	BedTextureInfo::TexturePart pc_part2(74, -10, 148, 12, "bbl_bed_pc_bottom.svg");
 	BedTextureInfo::TexturePart ep_part1(7.5, 90, 12.5, 150, "bbl_bed_ep_left.svg");
@@ -5527,6 +5528,8 @@ void PartPlateList::init_bed_type_info()
 	}
 	bed_texture_info[btPC].parts.push_back(pc_part1);
 	bed_texture_info[btPC].parts.push_back(pc_part2);
+	bed_texture_info[btPCT].parts.push_back(pct_part_left);
+	bed_texture_info[btPCT].parts.push_back(pc_part2);
 	bed_texture_info[btEP].parts.push_back(ep_part1);
 	bed_texture_info[btEP].parts.push_back(ep_part2);
 	bed_texture_info[btPEI].parts.push_back(pei_part1);

diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
@@ -3315,6 +3315,11 @@ void TabFilament::build()
         line.append_option(optgroup->get_option("cool_plate_temp"));
         optgroup->append_line(line);
 
+        line = { L("Textured Cool plate"), L("Bed temperature when cool plate is installed. Value 0 means the filament does not support to print on the Textured Cool Plate") };
+        line.append_option(optgroup->get_option("textured_cool_plate_temp_initial_layer"));
+        line.append_option(optgroup->get_option("textured_cool_plate_temp"));
+        optgroup->append_line(line);
+
         line = { L("Engineering plate"), L("Bed temperature when engineering plate is installed. Value 0 means the filament does not support to print on the Engineering Plate") };
         line.append_option(optgroup->get_option("eng_plate_temp_initial_layer"));
         line.append_option(optgroup->get_option("eng_plate_temp"));
@@ -3578,6 +3583,7 @@ void TabFilament::toggle_options()
         toggle_option("pressure_advance", pa);
         auto support_multi_bed_types = is_BBL_printer || cfg.opt_bool("support_multi_bed_types");
         toggle_line("cool_plate_temp_initial_layer", support_multi_bed_types );
+        toggle_line("textured_cool_plate_temp_initial_layer", support_multi_bed_types);
         toggle_line("eng_plate_temp_initial_layer", support_multi_bed_types);
         toggle_line("textured_plate_temp_initial_layer", support_multi_bed_types);