error 2:-10 when try to see the bambulab cam

[thezraner]

Is there an existing issue for this problem?

• I have searched the existing issues

OrcaSlicer Version

2.1.0

Operating System (OS)

Windows

OS Version

Windows 11 updated

Additional system information

No response

Printer

Bambulab P1S

How to reproduce

1. Open OrcaSlicer 2.1.0
2. Go to "Device"
3. Press play for the camera
4. Recieve the error 2:-10

Actual results

The camera shows all black with the error 2:-10

Expected results

The camera shows the image from the printer

Project file & Debug log uploads

log.zip

Checklist of files to include

• Log file
• Project file

Anything else?

It happens with every STL, even if dont have any STL load

[msteele999]

Confirmed - having the same issue here.

Bambu X1CC, Windows 11

Does not affect the sending of files to the printer - just the camera.

[SecretlyaGoodGuy]

Bambu P1s, Windows 11

Same Problem here, everything is working fine except the Video.

[Bob-Soft]

Same problem

[PMilstone]

Same issue here, unable to view camera through OrcaSlicer. Camera working fine in Bambu Handy.

My P1S just updated to the latest firmware so I suspect that's related.

[SecretlyaGoodGuy]

@PMilstone my P1S is not updated by now, so it don't need to be related

[scorfman]

Also experiencing this issue pre and post the latest bambulab software release 1.08. Works fine via BambuStudio and handy.

[balp]

Initial testing shows: Offical builds: Windows 11, affected, MacOS, Ubuntu not affected.

[balp]

After running the mac/linux version, and Bambu Studio 1.9.1.66 the issue on Windows 11, can't be reproduced anymore.

[balp]

Do OrcaSlicer and Bambu Studio share any libraries from the Bambu plugin? I didn't see Orca update reinstall it, but I think the Bambu Update pulled in a new plugin. If I recall correctly the humidity level drop has changed, on the AMS view now it's a clear drop with numbers, don't think I had that when I had issues. I hope this small testing helps locate the problem.

[SoftFever]

This should be fixed in the upcoming nightly build.
Unfortunately, my P1S's webcam died, so I can't test it at the moment.
For anyone encountering this issue, please try the latest nightly build and let me know if it resolves the problem.

[thezraner]

i have tried the portable nightly version, and it's fully working, thx so much!

[PMilstone]

Yep its now showing the P1S camera on my win11 machine using the 1bb8fad build! Thank you SoftFever, great work! I was using my phone for my camera view and was getting HOT.

[msteele999]

Confirmed nightly build now has camera on X1CC. Note - got an error message on initial startup that camera was associated with a different build - allowed it to apply a registry fix and then it worked.

…

On Wed, Jun 5, 2024 at 1:47 PM PMilstone ***@***.***> wrote: Yep its now showing the P1S camera on my win11 machine using the 1bb8fad <1bb8fad> build! Thank you SoftFever, great work! I was using my phone for my camera view and was getting HOT. — Reply to this email directly, view it on GitHub <#5554 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABRMUYMZ3ACVXUNKMV7PRTLZF5FMZAVCNFSM6AAAAABIU7YAHWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNJQGYZDEMZXGM> . You are receiving this because you commented.Message ID: ***@***.***>

[clively]

Had the same error message pop up. I said yes, then it worked after restarting orca. Looks great. Thank you!

…

On Wed, Jun 5, 2024 at 1:41 PM Mark Steele ***@***.***> wrote: Confirmed nightly build now has camera on X1CC. Note - got an error message on initial startup that camera was associated with a different build - allowed it to apply a registry fix and then it worked. On Wed, Jun 5, 2024 at 1:47 PM PMilstone ***@***.***> wrote: > Yep its now showing the P1S camera on my win11 machine using the 1bb8fad > < 1bb8fad> > build! Thank you SoftFever, great work! I was using my phone for my camera > view and was getting HOT. > > — > Reply to this email directly, view it on GitHub > < #5554 (comment)>, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/ABRMUYMZ3ACVXUNKMV7PRTLZF5FMZAVCNFSM6AAAAABIU7YAHWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNJQGYZDEMZXGM> > . > You are receiving this because you commented.Message ID: > ***@***.***> > — Reply to this email directly, view it on GitHub <#5554 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAC725CY3ACCAKHWX3YTRNLZF5LWXAVCNFSM6AAAAABIU7YAHWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNJQG4YTSMZWGQ> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[SecretlyaGoodGuy]

Yep, works perfectly with the Nightly, Thanks for the fast fix.

Got the same, error message first and then all worked with pressing yes on it and a restart of the Slicer.