upgrade start_gcode

resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json

@@ -115,7 +115,7 @@
       "0"
   ],
   "machine_pause_gcode": "PAUSE",
-  "machine_start_gcode": ";v2.9.1-20240620;\n;wiping nozzle start\nM106 P3 S0\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F6000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F6000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[0] + 60,print_bed_max[0])} F6000 \nG1 Z0.2 F600\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR                                  \nBED_MESH_PROFILE LOAD=default   # bedmesh load\nG92 E0 ;Reset Extruder\nG1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\nG92 E0 ;reset extruder\nG1 E4 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 60,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)}  F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
+  "machine_start_gcode": ";v2.9.2-20240814;\n;wiping nozzle start\nM106 P3 S0\nM140 S[bed_temperature_initial_layer_single]\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S[bed_temperature_initial_layer_single]\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR                                  \nBED_MESH_PROFILE LOAD=default   # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)}  F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
   "machine_unload_filament_time": "0",
   "max_layer_height": [
       "0.28"