Qidi profile updates

resources/profiles/Qidi/filament/fdm_filament_abs.json

@@ -5,7 +5,7 @@
     "instantiation": "false",
     "inherits": "fdm_filament_common",
     "activate_chamber_temp_control": [
-        "1"
+        "0"
     ],
     "cool_plate_temp" : [
         "90"

resources/profiles/Qidi/filament/fdm_filament_asa.json

@@ -5,7 +5,7 @@
     "instantiation": "false",
     "inherits": "fdm_filament_common",
     "activate_chamber_temp_control": [
-        "1"
+        "0"
     ],
     "cool_plate_temp" : [
         "90"

resources/profiles/Qidi/filament/fdm_filament_pla.json

@@ -96,12 +96,6 @@
     ],
     "enable_overhang_bridge_fan": [
         "0"
-    ],
-    "filament_z_hop_types": [
-        "Spiral Lift"
-    ],
-    "filament_wipe_distance": [
-        "2"
     ]
 
 }

resources/profiles/Qidi/machine/Qidi Q1 Pro 0.4 nozzle.json

@@ -54,7 +54,7 @@
     ],
     "wipe_distance": [
         "2"],
-	"single_extruder_multi_material": "0",
+	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M0",
     "thumbnails": [

resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json

@@ -94,7 +94,7 @@
 	"deretraction_speed": [
 		"0"
 	],
-	"single_extruder_multi_material": "0",
+	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M0",
 	"default_filament_profile": [

resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json

@@ -42,7 +42,7 @@
 	"extruder_clearance_radius": "70",
     "extruder_clearance_height_to_rod": "30",
     "extruder_clearance_height_to_lid": "118",
-	"single_extruder_multi_material": "0",
+	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M0",
 	"default_filament_profile": [

resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json

@@ -38,7 +38,7 @@
 	"deretraction_speed": [
 		"0"
 	],
-	"single_extruder_multi_material": "0",
+	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M0",
 	"default_filament_profile": [

resources/profiles/Qidi/machine/Qidi X-Plus 4 0.4 nozzle.json

@@ -58,7 +58,7 @@
     ],
     "wipe_distance": [
         "2"],
-	"single_extruder_multi_material": "0",
+	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M0",
     "thumbnails": [

resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json

@@ -44,7 +44,7 @@
     "140x140/COLPIC",
 	"110x110/PNG"
     ],
-	"single_extruder_multi_material": "0",
+	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M0",
 	"default_filament_profile": [

resources/profiles/Qidi/machine/fdm_machine_common.json

@@ -105,12 +105,12 @@
     "retraction_speed": [
         "30"
     ],
-    "single_extruder_multi_material": "0",
+    "single_extruder_multi_material": "1",
     "change_filament_gcode": "",
     "wipe": [
         "1"
     ],
-    "z_lift_type": "AutoLift",
+    "z_hop_types": ["Auto Lift"],
     "default_print_profile": "",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "machine_start_gcode": "G28\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29 ; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM83\nG0 Z5 F1200\nG0 X{first_layer_print_min[0]} Y{max(0, first_layer_print_min[1] - 2)} F12000\nG0 Z0.2 F600\nG1 E3 F1800\nG0 Z0.3 F600\nG1 X{min(first_layer_print_min[0] + 30,print_bed_max[0])} E6 F600",

resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json

@@ -18,7 +18,7 @@
     "compatible_printers_condition": "",
     "print_sequence": "by layer",
     "default_acceleration": "10000",
-    "bridge_no_support": "1",
+    "bridge_no_support": "0",
     "draft_shield": "disabled",
     "elefant_foot_compensation": "0.15",
     "enable_arc_fitting": "0",
@@ -115,6 +115,7 @@
     "internal_solid_infill_pattern": "zig-zag",
     "initial_layer_travel_speed": "50%",
     "filter_out_gap_fill": "2",
+    "small_perimeter_threshold": "4",
     "notes": "If you want to use Orca's chamber temperature control feature, check that printer.cfg has added the following M191 macro.\nTo add it: go to Fluidd web interface--configuration, copy the following code to the top of the printer.cfg document, SAVE&RESATART  \n\n[gcode_macro M191]\ngcode:\n    {% set s = params.S|float %}\n    {% if s == 0 %}\n        # If target temperature is 0, do nothing\n        M117 Chamber heating cancelled\n    {% else %}\n        SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={s}\n        # Orca: uncomment the following line if you want to use heat bed to assist chamber heating\n        M140 S90\n        TEMPERATURE_WAIT SENSOR=\"heater_generic chamber_heater\" MINIMUM={s-1} MAXIMUM={s+1}\n        M117 Chamber at target temperature\n    {% endif %}",
     "exclude_object": "1"
 }