mmc: sdhci-esdhc-imx: Propagate ESDHC_FLAG_HS400* only on 8bit bus

The core issues the warning "drop HS400 support since no 8-bit bus" when
one of the ESDHC_FLAG_HS400* flags is set on a non 8bit capable host. To
avoid this warning set these flags only on hosts that actually can do
8bit, i.e. have bus-width = <8> set in the device tree.

Signed-off-by: Sascha Hauer <[email protected]>
Reviewed-by: Haibo Chen <[email protected]>
Fixes: 029e247 ("mmc: sdhci-esdhc-imx: add HS400_ES support for i.MX8QXP")
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -1660,20 +1660,26 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		host->mmc_host_ops.execute_tuning = usdhc_execute_tuning;
 	}
 
+	err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data);
+	if (err)
+		goto disable_ahb_clk;
+
 	if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING)
 		sdhci_esdhc_ops.platform_execute_tuning =
 					esdhc_executing_tuning;
 
 	if (imx_data->socdata->flags & ESDHC_FLAG_ERR004536)
 		host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
 
-	if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
+	if (host->caps & MMC_CAP_8_BIT_DATA &&
+	    imx_data->socdata->flags & ESDHC_FLAG_HS400)
 		host->mmc->caps2 |= MMC_CAP2_HS400;
 
 	if (imx_data->socdata->flags & ESDHC_FLAG_BROKEN_AUTO_CMD23)
 		host->quirks2 |= SDHCI_QUIRK2_ACMD23_BROKEN;
 
-	if (imx_data->socdata->flags & ESDHC_FLAG_HS400_ES) {
+	if (host->caps & MMC_CAP_8_BIT_DATA &&
+	    imx_data->socdata->flags & ESDHC_FLAG_HS400_ES) {
 		host->mmc->caps2 |= MMC_CAP2_HS400_ES;
 		host->mmc_host_ops.hs400_enhanced_strobe =
 					esdhc_hs400_enhanced_strobe;
@@ -1695,10 +1701,6 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 			goto disable_ahb_clk;
 	}
 
-	err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data);
-	if (err)
-		goto disable_ahb_clk;
-
 	sdhci_esdhc_imx_hwinit(host);
 
 	err = sdhci_add_host(host);