HP Probook 440 G4 Hackintosh

This is the guide to install macOS on the HP Probook 440 G4.

• macOS Big Sur OpenCore repository

My Laptop Configuration:

• CPU: i5-7200U
• RAM: 16GB
• GPU: Nvidia 930MX / Intel HD 620
• WIFI: Broadcom BCM94352Z DW1560
• Drive: 500GB SSD
• FHD Display

What works:

• Wifi
• Bluetooth
• Intel HD 620 Graphics Acceleration
• Brightness
• Sleep
• Audio via AppleALC
• Keyboard with Volume Controls and Brightness controls
• Power Management with percentage
• Trackpad

What doesn't work:

• Nvidia GPU (not supported)
• Fingerprint sensor
• Camera (I changed SMBIOS from 14,1 to 15,4 camera doesn't work, but audio started to work properly)

Let's Get Started

Prepare:

• HP Probook 440 G4
• macOS Mojave downloaded from the App Store
• atleast 8GB USB stick
• USB Wifi adapter or LAN cable

Bios:

• open F10
• boot menu F9
• disabled Secure Boot
• disabled VT-d
• enabled VTx

USB installer:

• connect the USB stick to a device running macOS (Mac or Hackintosh)
• open Disk Utility - format USB as Mac OS Extended (Journaled) and rename it to USB
• download MacOS Mojave from the Apple App Store
• after download open terminal and paste:

sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB

• it should take up to 30 minutes
• when its done download Clover Bootloader
• mount EFI partition in Clover Configurator
• then download my EFI Folder
• replace my EFI with original EFI on EFI partition

Installation:

• turn on laptop and start pressing F9 key (it opens boot menu)
• select your USB stick and wait for it to boot
• select Install macOS... (use arrows and enter)
• after boot select Disk Utility
• in left corner click on "view" and select "Show All Devices"
• select your drive for Hackintosh
• format it as "APFS", scheme "GUID Partition Map"
• close Disk Utility and go to Install macOS, select your drive and continue...
• when your laptop restarts, be sure it boots to your USB stick
• continue the installation
• after installation completed, configure Hackintosh setting for your need

Post Instalation:

• download Clover Bootloader and install it for UEFI booting only
• go here and follow instruction (if it will show to enter the password over and over, then try to add before the command - sudo)
• after completing the previous point download my EFI folder
• go to Clover Configurator and mount EFI partition on the current boot disk
• replace EFI with my EFI
• reboot your laptop

Now everything should be working

Quick Fix:

• If trackpad suddenly stops working just hit print screen button on your keyboard (it works as toggle for trackpad)

Enjoy your new hackintosh