mumudvb not discramble biss channel

[juankr10s]

hi,
i test this config:

_autoconfiguration=full
autoconf_radios=1
autoconf_scrambled=1

scam_support=1

scam_const_key=1001,00:00:00:00:00:00:00:00,XX:XX:XX:XX:XX:XX:XX:XX_

i get this error:

Deb1: Autoconf: PMT (PID 1111) read for configuration of channel "channel bi$$" with SID 1001
Deb2: Autoconf: Found a CA descr in main loop at pos 23
Deb1: Autoconf: ECM PID 8191
ERRO: Autoconf: Couldn't find CAT CA system for id 0x2600
Deb0: Autoconf: CA system id 0x2600 : European Broadcasting Union

Mumudvb version is :

MuMuDVB Version 2.1.0_20181020_mumudvb2
--- Build information ---
Built with CAM support.
Built with SCAM support.
Built with ATSC support.
Built with ATSC long channel names support.
Built with support for DVB API Version 5.10.
Built with support for DVB-T2.

[Saentist]

add -vvv to command line

[juankr10s]

MuMuDVB Version 2.1.0_20181020_mumudvb2
--- Build information ---
Built with CAM support.
Built with SCAM support.
Built with ATSC support.
Built with ATSC long channel names support.
Built with support for DVB API Version 5.10.
Built with support for DVB-T2.

Originally based on dvbstream 0.6 by (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://mumudvb.net/
Project from the cr@ns (http://www.crans.org)
by Brice DUBOST ([email protected])

Deb2: Main: ==== Configuration file ====
Deb2: Main: 001 #tarjeta=0
Deb2: Main: 002 #lnb_lof_low=5150
Deb2: Main: 003 #lnb_lof_high=5150
Deb2: Main: 004 sat_number=3
Deb2: Main: 005
Deb2: Main: 006 freq=11814
Deb2: Main: 007 pol=H
Deb2: Main: 008 srate=6400
Deb2: Main: 009 coderate=auto
Deb2: Main: 010
Deb2: Main: 011 #delivery_system=DVBS2
Deb2: Main: 012 autoconfiguration=full
Deb2: Main: 013
Deb2: Main: 014
Deb2: Main: 015 cam_support=1
Deb2: Main: 016
Deb2: Main: 017 scam_const_key=1,00:00:00:00:00:00:00:00,XX:XX:XX:XX:XX:XX:XX:XX
Deb2: Main: 018
Deb2: Main: 019 multicast_ipv4=0
Deb2: Main: 020 multicast_ipv6=0
Deb2: Main: 021 unicast=1
Deb2: Main: 022 ip_http=0.0.0.0
Deb2: Main: 023 port_http=4242
Deb2: Main: ============ done ===========
Info: CAM: You have enabled the support for conditional access modules (scrambled channels).
Info: Main: Autoconfiguration, we activate SAP announces. if you want to disable them see the README.
Info: Main: Autoconfiguration, we activate PAT rewriting. if you want to disable it see the README.
Info: Main: Autoconfiguration, we activate SDT rewriting. if you want to disable it see the README.
Info: Main: ========== End of configuration, MuMuDVB version 2.1.0_20181020_mumudvb2 is starting ==========
WARN: Main: Can't create /var/run/mumudvb/channels_streamed_adapter0_tuner0: No such file or directory
WARN: Main: Can't create /var/run/mumudvb/channels_unstreamed_adapter0_tuner0: No such file or directory
WARN: Main: Can't create /var/run/mumudvb/caminfo_adapter0_tuner0: No such file or directory
Info: Main: Streaming. Freq 11814000.000000
Info: Tune: Using DVB card "TurboSight TBS 5927 DVB-S/S2" tuner 0
Info: Tune: Tuning DVB-S to Freq: 1214000 kHz, LO frequency 10600000 kHz Pol:H Srate=6400000, LNB number: 3
Info: Tune: LNB voltage 18V
Deb0: Tune: Test Diseqc message e0 10 38 fb 00 00 len 4
Deb0: Tune: Sending first Diseqc message e0 10 38 fb 00 00 len 4
Info: Tune: DISEQC SETTING SUCCEDED
Deb0: Tune: polling....
Info: Tune: FE_STATUS:
Info: Tune: FE_HAS_SIGNAL : found something above the noise level
Info: Tune: FE_HAS_CARRIER : found a DVB signal
Info: Tune: FE_HAS_VITERBI : FEC is stable
Info: Tune: FE_HAS_SYNC : found sync bytes
Info: Tune: FE_HAS_LOCK : everything's working...
Info: Tune: Event: Frequency: 11814000 (or 9386000)
Info: Tune: SymbolRate: 6400000
Info: Tune: FEC_inner: 3
Info: Tune: Bit error rate: 0
Info: Tune: Signal strength: 41328
Info: Tune: SNR: 36736
Info: Main: Card 0, tuner 0 tuned
main 0xbfb291e8
Deb1: CAM: CAM Initialization
Deb1: CAM: CONF cam_reask_interval=0
Deb1: CAM: CONF cam_reset_interval=30
Deb1: CAM: CONF cam_number=0
Deb1: CAM: CONF cam_delay_pmt_send=0
Deb1: CAM: CONF cam_interval_pmt_send=3
ERRO: CAM: Failed to create the stdcam instance (no cam present ?)
ERRO: CAM: Cannot initalise cam
Info: Common chan: Looking through all services to update their filters
Deb0: Common chan: Open the new filters
Deb1: DVB: Setting filter for PID 0
Deb1: DVB: Setting filter for PID 1
Deb1: DVB: Setting filter for PID 16
Deb1: DVB: Setting filter for PID 17
Deb1: DVB: Setting filter for PID 18
Deb1: DVB: Setting filter for PID 20
Info: Unicast: We open the Master http socket for address 0.0.0.0:4242
Deb1: Unicast : unicast : unicast_vars->pfdsnum : 1
Info: Autoconf: Autoconfiguration is now ready to work for you !
Deb1: Autoconf: PAT Need update. stored version : -1, new: 9
Deb2: TS: General information PID 0 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 13
Deb2: TS: Starting a packet PID 0 cc 13 len 20 expected len 20
Deb2: TS: First bytes 0x00 0xb0 0x11 0x00 0x01 0xd3 0x00 0x00
Deb2: TS: Struct data table_id 0x00 section_syntax_indicator 0x01 section_length 0x11 transport_stream_id 0x01 version_number 0x09 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 20. There's now 1 full packet
Deb2: TS: Calling recursively, data left 163
Deb2: TS: Stuffing bytes found data left 163
Deb2: TS: General information PID 0 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 13
Deb2: TS: Starting a packet PID 0 cc 13 len 20 expected len 20
Deb2: TS: First bytes 0x00 0xb0 0x11 0x00 0x01 0xd3 0x00 0x00
Deb2: TS: Struct data table_id 0x00 section_syntax_indicator 0x01 section_length 0x11 transport_stream_id 0x01 version_number 0x09 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 20. There's now 1 full packet
Deb2: TS: Calling recursively, data left 163
Deb2: TS: Stuffing bytes found data left 163
Deb1: Autoconf: PAT Need update. stored version : -1, new: 9
Deb2: TS: Full packet left: 1, we copy length 20
Deb2: TS: General information PID 0 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 14
Deb2: TS: Starting a packet PID 0 cc 14 len 20 expected len 20
Deb2: TS: First bytes 0x00 0xb0 0x11 0x00 0x01 0xd3 0x00 0x00
Deb2: TS: Struct data table_id 0x00 section_syntax_indicator 0x01 section_length 0x11 transport_stream_id 0x01 version_number 0x09 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 20. There's now 1 full packet
Deb2: TS: Calling recursively, data left 163
Deb2: TS: Stuffing bytes found data left 163
Info: Autoconf: The PAT version changed, channels have changed
Info: Autoconf: New PAT we force SDT update after all sections seen
Deb1: Autoconf: ---- New PAT version 9 section 0 ----
Deb2: Autoconf: -------------- Display PAT ----------------
Deb2: Autoconf: transport stream id 0x0001 section_length 17 version 9 section_number 0 last_section_number 0 current_next_indicator 1
Deb1: Autoconf: Network PID 16 (PID of the NIT)
Deb1: Autoconf: service 1 id 0x0001 1 PMT PID : 480
Deb1: Autoconf: This PAT contains 1 services
Deb2: Autoconf: -------------- PAT Displayed ----------------
Deb2: Autoconf: PAT version 9 program 1 NEW channel 1
Deb1: Autoconf: It seems that we have finished to get the channel/services list
WARN: Autoconf: Channel 0 SID 1 Force PMT update
Deb2: TS: Full packet left: 1, we copy length 20
Deb2: TS: General information PID 0 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 14
Deb2: TS: Starting a packet PID 0 cc 14 len 20 expected len 20
Deb2: TS: First bytes 0x00 0xb0 0x11 0x00 0x01 0xd3 0x00 0x00
Deb2: TS: Struct data table_id 0x00 section_syntax_indicator 0x01 section_length 0x11 transport_stream_id 0x01 version_number 0x09 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 20. There's now 1 full packet
Deb2: TS: Calling recursively, data left 163
Deb2: TS: Stuffing bytes found data left 163
Deb1: PAT Rewrite: Full PAT updated
Deb1: PAT Rewrite: New pat version. Old : -1, new: 9
Deb2: PAT Rewrite: -------------- Display PAT ----------------
Deb2: PAT Rewrite: transport stream id 0x0001 section_length 17 version 9 section_number 0 last_section_number 0 current_next_indicator 1
Deb1: PAT Rewrite: Network PID 16 (PID of the NIT)
Deb1: PAT Rewrite: service 1 id 0x0001 1 PMT PID : 480
Deb1: PAT Rewrite: This PAT contains 1 services
Deb2: PAT Rewrite: -------------- PAT Displayed ----------------
Deb2: TS: Full packet left: 1, we copy length 20
Deb1: PAT Rewrite: Full PAT updated
Deb2: PAT Rewrite: -------------- Display PAT ----------------
Deb2: PAT Rewrite: transport stream id 0x0001 section_length 17 version 9 section_number 0 last_section_number 0 current_next_indicator 1
Deb1: PAT Rewrite: Network PID 16 (PID of the NIT)
Deb1: PAT Rewrite: service 1 id 0x0001 1 PMT PID : 480
Deb1: PAT Rewrite: This PAT contains 1 services
Deb2: PAT Rewrite: -------------- PAT Displayed ----------------
Deb1: Autoconf: CAT Need update. stored version : 0, new: 6
Deb2: TS: General information PID 1 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 3
Deb2: TS: Starting a packet PID 1 cc 3 len 12 expected len 12
Deb2: TS: First bytes 0x01 0xb0 0x09 0xff 0xff 0xcd 0x00 0x00
Deb2: TS: Struct data table_id 0x01 section_syntax_indicator 0x01 section_length 0x09 transport_stream_id 0xffff version_number 0x06 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 12. There's now 1 full packet
Deb2: TS: Calling recursively, data left 171
Deb2: TS: Stuffing bytes found data left 171
Deb1: Autoconf: CAT Need update. stored version : 0, new: 6
Deb2: TS: Full packet left: 1, we copy length 12
Deb2: TS: General information PID 1 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 4
Deb2: TS: Starting a packet PID 1 cc 4 len 12 expected len 12
Deb2: TS: First bytes 0x01 0xb0 0x09 0xff 0xff 0xcd 0x00 0x00
Deb2: TS: Struct data table_id 0x01 section_syntax_indicator 0x01 section_length 0x09 transport_stream_id 0xffff version_number 0x06 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 12. There's now 1 full packet
Deb2: TS: Calling recursively, data left 171
Deb2: TS: Stuffing bytes found data left 171
Info: Autoconf: The CAT version changed
Info: Autoconf: New CAT we force SDT update after all sections seen
Deb1: Autoconf: ---- New CAT version 6 section 0 ----
Deb1: Autoconf: It seems that we have finished to get the CAT
Deb1: Autoconf: SDT Need update. stored version : -1, new: 1
Deb2: TS: General information PID 17 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 4
Deb2: TS: Starting a packet PID 17 cc 4 len 56 expected len 56
Deb2: TS: First bytes 0x42 0xf0 0x35 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x42 section_syntax_indicator 0x01 section_length 0x35 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 56. There's now 1 full packet
Deb2: TS: Calling recursively, data left 127
Deb2: TS: Stuffing bytes found data left 127
Deb2: TS: General information PID 17 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 4
Deb2: TS: Starting a packet PID 17 cc 4 len 56 expected len 56
Deb2: TS: First bytes 0x42 0xf0 0x35 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x42 section_syntax_indicator 0x01 section_length 0x35 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 56. There's now 1 full packet
Deb2: TS: Calling recursively, data left 127
Deb2: TS: Stuffing bytes found data left 127
Deb1: Autoconf: NIT Need update. stored version : -1, new: 1
Deb2: TS: General information PID 16 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 4
Deb2: TS: Starting a packet PID 16 cc 4 len 135 expected len 135
Deb2: TS: First bytes 0x40 0xf0 0x84 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x40 section_syntax_indicator 0x01 section_length 0x84 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 135. There's now 1 full packet
Deb2: TS: Calling recursively, data left 48
Deb2: TS: Stuffing bytes found data left 48
Deb1: Autoconf: SDT Need update. stored version : -1, new: 1
Deb2: TS: Full packet left: 1, we copy length 56
Deb2: TS: General information PID 17 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 5
Deb2: TS: Starting a packet PID 17 cc 5 len 56 expected len 56
Deb2: TS: First bytes 0x42 0xf0 0x35 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x42 section_syntax_indicator 0x01 section_length 0x35 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 56. There's now 1 full packet
Deb2: TS: Calling recursively, data left 127
Deb2: TS: Stuffing bytes found data left 127
Info: Autoconf: The SDT version changed, channels description have changed
Deb1: Autoconf: -- SDT : Service Description Table (id 0x42)--
Deb2: Autoconf: -- SDT: TSID 0x0001 original_network_id 0x0001 version 1 section number 0 last section number 0 --
Deb1: Autoconf: We will update service with id : 0x1 1
Deb2: Autoconf: running_status : running
Deb1: Autoconf: free_ca_mode : 0x0
Deb1: Autoconf: service type: 0x19 : Advanced codec HD Television
Deb1: Logs: String len 20 offset 0
Deb1: Logs: String len before conversion 20 (DEBUG lenstring is 20 )
Deb2: Logs: Converted text : "CHANNELNAME" (text encoding : ISO8859-9)
nonreversible conversions 0
Deb2: Logs: Converted text : "CHANNELNAME" (text encoding : ISO8859-9)
Deb1: Autoconf: Channel SID 1 name will be updated
Deb1: Autoconf: Channel SID 1 name : "CHANNELNAME" (name encoding : ISO8859-9)
Deb1: Autoconf: It seems that we have finished to update get the channels basic info
Info: Autoconf: We update the channel names
Deb1: Autoconf: Channel SID 1 service name: "CHANNELNAME" user name: "" channel name: "CHANNELNAME"
Deb2: Autoconf: Channel name: "CHANNELNAME" LCN asked and the NIT has been seen, SAP will be sent for this channel
Info: Autoconf: We update the channel status
Info: Autoconf: Looking through all channels to see if they are ready for streaming
Deb0: Autoconf: Service OK becoming ready. Name "CHANNELNAME", id 1 type Advanced codec HD Television
Info: Autoconf: We update the channel filters
Info: Common chan: Looking through all services to update their filters
Deb0: Common chan: pid 480 added
Deb0: Common chan: Open the new filters
Deb1: DVB: Setting filter for PID 480
Info: Autoconf: We update the channel networking
Deb2: TS: Full packet left: 1, we copy length 56
Deb2: TS: General information PID 17 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 5
Deb2: TS: Starting a packet PID 17 cc 5 len 56 expected len 56
Deb2: TS: First bytes 0x42 0xf0 0x35 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x42 section_syntax_indicator 0x01 section_length 0x35 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 56. There's now 1 full packet
Deb2: TS: Calling recursively, data left 127
Deb2: TS: Stuffing bytes found data left 127
Deb0: SDT rewrite: Full SDT updated. section number 0, last_section_number 0
Deb1: SDT rewrite: New sdt version. Old : -1, new: 1
Deb0: Main: The SDT version changed, we force the update of all the channels.
Deb1: SDT rewrite: We need to rewrite the SDT for the channel 0 : "CHANNELNAME"
Deb1: SDT rewrite: table id 0x42
Deb1: SDT rewrite: Program found, we search for interesting descriptors
Deb2: SDT rewrite: We copy this descriptor : descriptor_tag 0x48 descriptor_len 36 (on 36) loop length 0 pos 0
Deb0: SDT rewrite: NEW program for channel 0 : "CHANNELNAME". service_id : 1
Deb2: TS: Full packet left: 1, we copy length 135
Deb2: TS: General information PID 16 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 5
Deb2: TS: Starting a packet PID 16 cc 5 len 135 expected len 135
Deb2: TS: First bytes 0x40 0xf0 0x84 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x40 section_syntax_indicator 0x01 section_length 0x84 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 135. There's now 1 full packet
Deb2: TS: Calling recursively, data left 48
Deb2: TS: Stuffing bytes found data left 48
Deb2: Autoconf: New NIT
Info: Autoconf: The NIT version changed, channels number could have changed !
Deb2: Autoconf: -- NIT : Network Information Table --
Deb2: Autoconf: Network id 0x01 see "http://www.dvbservices.com/identifiers/export/network_id"
Deb2: Autoconf: NIT network name descriptor
Deb2: Autoconf: NIT network descriptor_len 11
Deb1: Logs: String len 11 offset 0
Deb1: Logs: String len before conversion 11 (DEBUG lenstring is 11 )
Deb2: Logs: Converted text : "NWNAME" (text encoding : ISO8859-9)
nonreversible conversions 0
Deb2: Autoconf: network name : "NWNAME"
Deb2: Autoconf: NIT network descriptor_tag : 0xc4
Deb2: Autoconf: --- NIT ts_descriptors_loop_len 24 descriptors_loop_len 18
Deb2: Autoconf: --- NIT descriptor concerning the network id 0x0001
Deb2: Autoconf: --- NIT descriptor concerning the multiplex 0x0001 our multiplex 0x0001
Deb2: Autoconf: --- NIT descriptor --- Service list descriptor
Deb2: Autoconf: Service ID : 0x01 service type: 0x19 : Advanced codec HD Television
Deb2: Autoconf: --- descriptor done ---
Deb2: Autoconf: --- NIT descriptor --- satellite delivery system descriptor
Deb2: Autoconf: Frequency: 04080.00 MHz
Deb2: Autoconf: Orbital position: 97,0°
Deb2: Autoconf: Western position
Deb2: Autoconf: Polarization: linear - vertical
Deb2: Autoconf: Modulation system: DVB-S
Deb2: Autoconf: Constellation: QPSK
Deb2: Autoconf: Symbol rate: 029,2900 Msymbol/s
Deb2: Autoconf: Inner FEC scheme: 3/4
Deb2: Autoconf: --- descriptor done ---
Deb1: Autoconf: It seems that we have finished to get the logical channel number
Info: Autoconf: We got the NIT, we update the channel names
Deb1: Autoconf: Channel SID 1 service name: "CHANNELNAME" user name: "" channel name: "CHANNELNAME"
Deb2: Autoconf: Channel name: "CHANNELNAME" LCN asked and the NIT has been seen, SAP will be sent for this channel
Deb1: PAT Rewrite: We need to rewrite the PAT for the channel 0 : "CHANNELNAME"
Deb1: PAT Rewrite: PAT rewrite : pointer field 0x0
Deb0: PAT Rewrite: NEW program for channel 0 : "CHANNELNAME". PMT pid : 480
Deb1: Common chan: PMT Need update. stored version : -1, new: 7
Deb1: Common chan: We update the PMT for channel 0 sid 1
Deb2: TS: General information PID 480 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 12
Deb2: TS: Starting a packet PID 480 cc 12 len 101 expected len 101
Deb2: TS: First bytes 0x02 0xb0 0x62 0x00 0x01 0xcf 0x00 0x00
Deb2: TS: Struct data table_id 0x02 section_syntax_indicator 0x01 section_length 0x62 transport_stream_id 0x01 version_number 0x07 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 101. There's now 1 full packet
Deb2: TS: Calling recursively, data left 82
Deb2: TS: Stuffing bytes found data left 82
Info: Main: Channel "CHANNELNAME" down.Card 0
Deb1: Common chan: We update the PMT for channel 0 sid 1
Deb2: TS: Full packet left: 1, we copy length 101
Deb2: TS: General information PID 480 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 13
Deb2: TS: Starting a packet PID 480 cc 13 len 101 expected len 101
Deb2: TS: First bytes 0x02 0xb0 0x62 0x00 0x01 0xcf 0x00 0x00
Deb2: TS: Struct data table_id 0x02 section_syntax_indicator 0x01 section_length 0x62 transport_stream_id 0x01 version_number 0x07 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 101. There's now 1 full packet
Deb2: TS: Calling recursively, data left 82
Deb2: TS: Stuffing bytes found data left 82
Deb1: Autoconf: PMT (PID 480) read for configuration of channel "CHANNELNAME" with SID 1
Deb2: Autoconf: Found a CA descr in main loop at pos 9
Deb1: Autoconf: ECM PID 8191
ERRO: Autoconf: Couldn't find CAT CA system for id 0x2600
Deb0: Autoconf: CA system id 0x2600 : European Broadcasting Union
Deb1: Autoconf: Video MPEG4-AVC PID 481
Deb1: Autoconf: PID Language Code = ---
Deb1: Autoconf: Audio MPEG1 PID 482
Deb1: Autoconf: PID Language Code = eng
Deb1: Autoconf: Audio MPEG1 PID 483
Deb1: Autoconf: PID Language Code = eng
Deb1: Autoconf: Audio MPEG1 PID 484
Deb1: Autoconf: PID Language Code = eng
Deb1: Autoconf: Audio MPEG1 PID 485
Deb1: Autoconf: PID Language Code = eng
Deb1: Autoconf: PCR pid 481
Deb1: Autoconf: Detected PIDs
Deb1: Autoconf: PID 8191 type CA information (ECM) language
Deb1: Autoconf: PID 481 type Video (MPEG4-AVC) language ---
Deb1: Autoconf: PID 482 type Audio (MPEG1) language eng
Deb1: Autoconf: PID 483 type Audio (MPEG1) language eng
Deb1: Autoconf: PID 484 type Audio (MPEG1) language eng
Deb1: Autoconf: PID 485 type Audio (MPEG1) language eng
Deb1: Autoconf: PID 481 type PCR language ---
Deb1: Autoconf: Channel update number of PIDs detected 8 old 1 we check for changes
Deb0: Autoconf: PIDs update
Deb0: Autoconf: PID 8191 added type CA information (ECM) lang
Deb0: Autoconf: PID 481 added type Video (MPEG4-AVC) lang ---
Deb0: Autoconf: PID 482 added type Audio (MPEG1) lang eng
Deb0: Autoconf: PID 483 added type Audio (MPEG1) lang eng
Deb0: Autoconf: PID 484 added type Audio (MPEG1) lang eng
Deb0: Autoconf: PID 485 added type Audio (MPEG1) lang eng
Deb0: Autoconf: PID 481 added type PCR lang ---
Deb0: Autoconf: pids :
Deb0: Autoconf: 480 (PMT)
Deb0: Autoconf: 8191 (CA information (ECM))
Deb0: Autoconf: 481 (Video (MPEG4-AVC))
Deb0: Autoconf: 482 (Audio (MPEG1))
Deb0: Autoconf: 483 (Audio (MPEG1))
Deb0: Autoconf: 484 (Audio (MPEG1))
Deb0: Autoconf: 485 (Audio (MPEG1))
Deb0: Autoconf: 481 (PCR)
Deb1: Autoconf: It seems that we have finished to get the Program Map Table
Deb1: Autoconf: Number of PIDs after autoconf 8
Deb0: Autoconf: PIDs for channel 0 "CHANNELNAME" : 480 8191 481 482 483 484 485 481
Deb2: Autoconf: Primary language for channel:
Deb1: Autoconf: Channel SID 1 service name: "CHANNELNAME" user name: "" channel name: "CHANNELNAME"
Deb2: Autoconf: Channel name: "CHANNELNAME" LCN asked and the NIT has been seen, SAP will be sent for this channel
Info: Common chan: Looking through all services to update their filters
Deb0: Common chan: pid 481 added
Deb0: Common chan: pid 482 added
Deb0: Common chan: pid 483 added
Deb0: Common chan: pid 484 added
Deb0: Common chan: pid 485 added
Deb0: Common chan: pid 8191 added
Deb0: Common chan: Open the new filters
Deb1: DVB: Setting filter for PID 481
Deb1: DVB: Setting filter for PID 482
Deb1: DVB: Setting filter for PID 483
Deb1: DVB: Setting filter for PID 484
Deb1: DVB: Setting filter for PID 485
Deb1: DVB: Setting filter for PID 8191
Info: Autoconf: We update the channel CAM support
Info: Autoconf: Diffusion 1 channel
Info: Autoconf: Channel number : 0, service id 1 name : "CHANNELNAME"
Info: Autoconf: Unicast : Channel accessible via the master connection, 0.0.0.0:4242
Deb0: Autoconf: pids : 480 (PMT), 8191 (CA information (ECM) ), 481 (Video (MPEG4-AVC)), 482 (Audio (MPEG1) eng), 483 (Audio (MPEG1) eng), 484 (Audio (MPEG1) eng), 485 (Audio (MPEG1) eng), 481 (PCR),
Info: Main: Channel "CHANNELNAME" is now highly scrambled (100% of scrambled packets). Card 0
Info: Main: Channel "CHANNELNAME" back.Card 0

I omitted the key ; the real key for xx:xx:xx... in this log

[Saentist]

When post terminal output use CODE button

example:
              (SID, odd key, even key): 
scam_const_key=103,11:22:33:44:55:66:77:88,11:22:33:44:55:66:77:88

Try to put key twice.

[juankr10s]

This is the output for the same odd and even key

--- Build information ---
Built with CAM support.
Built with SCAM support.
Built with ATSC support.
Built with ATSC long channel names support.
Built with support for DVB API Version 5.10.
Built with support for DVB-T2.

Originally based on dvbstream 0.6 by (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://mumudvb.net/
Project from the cr@ns (http://www.crans.org)
by Brice DUBOST ([email protected])

Deb2: Main: ==== Configuration file ====
Deb2: Main: 001 sat_number=3
Deb2: Main: 002 freq=11814
Deb2: Main: 003 pol=H
Deb2: Main: 004 srate=6400
Deb2: Main: 005 coderate=auto
Deb2: Main: 006
Deb2: Main: 007 #delivery_system=DVBS2
Deb2: Main: 008 autoconfiguration=full
Deb2: Main: 009
Deb2: Main: 010
Deb2: Main: 011 cam_support=1
Deb2: Main: 012
Deb2: Main: 013 scam_const_key=1,XX:XX:XX:XX:XX:XX:XX:XX,XX:XX:XX:XX:XX:XX:XX:XX
Deb2: Main: 014
Deb2: Main: 015 multicast_ipv4=0
Deb2: Main: 016 multicast_ipv6=0
Deb2: Main: 017 unicast=1
Deb2: Main: 018 ip_http=0.0.0.0
Deb2: Main: 019 port_http=4242
Deb2: Main: ============ done ===========
Info: CAM: You have enabled the support for conditional access modules (scrambled channels).
Info: Main: Autoconfiguration, we activate SAP announces. if you want to disable them see the README.
Info: Main: Autoconfiguration, we activate PAT rewriting. if you want to disable it see the README.
Info: Main: Autoconfiguration, we activate SDT rewriting. if you want to disable it see the README.
Info: Main: ========== End of configuration, MuMuDVB version 2.1.0_20181020_mumudvb2 is starting ==========
WARN: Main: Can't create /var/run/mumudvb/channels_streamed_adapter0_tuner0: No such file or directory
WARN: Main: Can't create /var/run/mumudvb/channels_unstreamed_adapter0_tuner0: No such file or directory
WARN: Main: Can't create /var/run/mumudvb/caminfo_adapter0_tuner0: No such file or directory
Info: Main: Streaming. Freq 11814000.000000
Info: Tune: Using DVB card "TurboSight TBS 5927 DVB-S/S2" tuner 0
Info: Tune: Tuning DVB-S to Freq: 1214000 kHz, LO frequency 10600000 kHz Pol:H Srate=6400000, LNB number: 3
Info: Tune: LNB voltage 18V
Deb0: Tune: Test Diseqc message e0 10 38 fb 00 00 len 4
Deb0: Tune: Sending first Diseqc message e0 10 38 fb 00 00 len 4
Info: Tune: DISEQC SETTING SUCCEDED
Deb0: Tune: polling....
Info: Tune: FE_STATUS:
Info: Tune: FE_HAS_SIGNAL : found something above the noise level
Info: Tune: FE_HAS_CARRIER : found a DVB signal
Info: Tune: FE_HAS_VITERBI : FEC is stable
Info: Tune: FE_HAS_SYNC : found sync bytes
Info: Tune: FE_HAS_LOCK : everything's working...
Info: Tune: Event: Frequency: 11814000 (or 9386000)
Info: Tune: SymbolRate: 6400000
Info: Tune: FEC_inner: 3
Info: Tune: Bit error rate: 0
Info: Tune: Signal strength: 42640
Info: Tune: SNR: 37064
Info: Main: Card 0, tuner 0 tuned
main 0xbfb19908
Deb1: CAM: CAM Initialization
Deb1: CAM: CONF cam_reask_interval=0
Deb1: CAM: CONF cam_reset_interval=30
Deb1: CAM: CONF cam_number=0
Deb1: CAM: CONF cam_delay_pmt_send=0
Deb1: CAM: CONF cam_interval_pmt_send=3
ERRO: CAM: Failed to create the stdcam instance (no cam present ?)
ERRO: CAM: Cannot initalise cam
Info: Common chan: Looking through all services to update their filters
Deb0: Common chan: Open the new filters
Deb1: DVB: Setting filter for PID 0
Deb1: DVB: Setting filter for PID 1
Deb1: DVB: Setting filter for PID 16
Deb1: DVB: Setting filter for PID 17
Deb1: DVB: Setting filter for PID 18
Deb1: DVB: Setting filter for PID 20
Info: Unicast: We open the Master http socket for address 0.0.0.0:4242
Deb1: Unicast : unicast : unicast_vars->pfdsnum : 1
Info: Autoconf: Autoconfiguration is now ready to work for you !
Deb1: Autoconf: PAT Need update. stored version : -1, new: 9
Deb2: TS: General information PID 0 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 10
Deb2: TS: Starting a packet PID 0 cc 10 len 20 expected len 20
Deb2: TS: First bytes 0x00 0xb0 0x11 0x00 0x01 0xd3 0x00 0x00
Deb2: TS: Struct data table_id 0x00 section_syntax_indicator 0x01 section_length 0x11 transport_stream_id 0x01 version_number 0x09 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 20. There's now 1 full packet
Deb2: TS: Calling recursively, data left 163
Deb2: TS: Stuffing bytes found data left 163
Deb2: TS: General information PID 0 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 10
Deb2: TS: Starting a packet PID 0 cc 10 len 20 expected len 20
Deb2: TS: First bytes 0x00 0xb0 0x11 0x00 0x01 0xd3 0x00 0x00
Deb2: TS: Struct data table_id 0x00 section_syntax_indicator 0x01 section_length 0x11 transport_stream_id 0x01 version_number 0x09 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 20. There's now 1 full packet
Deb2: TS: Calling recursively, data left 163
Deb2: TS: Stuffing bytes found data left 163
Deb1: Autoconf: PAT Need update. stored version : -1, new: 9
Deb2: TS: Full packet left: 1, we copy length 20
Deb2: TS: General information PID 0 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 11
Deb2: TS: Starting a packet PID 0 cc 11 len 20 expected len 20
Deb2: TS: First bytes 0x00 0xb0 0x11 0x00 0x01 0xd3 0x00 0x00
Deb2: TS: Struct data table_id 0x00 section_syntax_indicator 0x01 section_length 0x11 transport_stream_id 0x01 version_number 0x09 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 20. There's now 1 full packet
Deb2: TS: Calling recursively, data left 163
Deb2: TS: Stuffing bytes found data left 163
Info: Autoconf: The PAT version changed, channels have changed
Info: Autoconf: New PAT we force SDT update after all sections seen
Deb1: Autoconf: ---- New PAT version 9 section 0 ----
Deb2: Autoconf: -------------- Display PAT ----------------
Deb2: Autoconf: transport stream id 0x0001 section_length 17 version 9 section_number 0 last_section_number 0 current_next_indicator 1
Deb1: Autoconf: Network PID 16 (PID of the NIT)
Deb1: Autoconf: service 1 id 0x0001 1 PMT PID : 480
Deb1: Autoconf: This PAT contains 1 services
Deb2: Autoconf: -------------- PAT Displayed ----------------
Deb2: Autoconf: PAT version 9 program 1 NEW channel 1
Deb1: Autoconf: It seems that we have finished to get the channel/services list
WARN: Autoconf: Channel 0 SID 1 Force PMT update
Deb2: TS: Full packet left: 1, we copy length 20
Deb2: TS: General information PID 0 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 11
Deb2: TS: Starting a packet PID 0 cc 11 len 20 expected len 20
Deb2: TS: First bytes 0x00 0xb0 0x11 0x00 0x01 0xd3 0x00 0x00
Deb2: TS: Struct data table_id 0x00 section_syntax_indicator 0x01 section_length 0x11 transport_stream_id 0x01 version_number 0x09 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 20. There's now 1 full packet
Deb2: TS: Calling recursively, data left 163
Deb2: TS: Stuffing bytes found data left 163
Deb1: PAT Rewrite: Full PAT updated
Deb1: PAT Rewrite: New pat version. Old : -1, new: 9
Deb2: PAT Rewrite: -------------- Display PAT ----------------
Deb2: PAT Rewrite: transport stream id 0x0001 section_length 17 version 9 section_number 0 last_section_number 0 current_next_indicator 1
Deb1: PAT Rewrite: Network PID 16 (PID of the NIT)
Deb1: PAT Rewrite: service 1 id 0x0001 1 PMT PID : 480
Deb1: PAT Rewrite: This PAT contains 1 services
Deb2: PAT Rewrite: -------------- PAT Displayed ----------------
Deb2: TS: Full packet left: 1, we copy length 20
Deb1: PAT Rewrite: Full PAT updated
Deb2: PAT Rewrite: -------------- Display PAT ----------------
Deb2: PAT Rewrite: transport stream id 0x0001 section_length 17 version 9 section_number 0 last_section_number 0 current_next_indicator 1
Deb1: PAT Rewrite: Network PID 16 (PID of the NIT)
Deb1: PAT Rewrite: service 1 id 0x0001 1 PMT PID : 480
Deb1: PAT Rewrite: This PAT contains 1 services
Deb2: PAT Rewrite: -------------- PAT Displayed ----------------
Deb1: Autoconf: CAT Need update. stored version : 0, new: 6
Deb2: TS: General information PID 1 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 13
Deb2: TS: Starting a packet PID 1 cc 13 len 12 expected len 12
Deb2: TS: First bytes 0x01 0xb0 0x09 0xff 0xff 0xcd 0x00 0x00
Deb2: TS: Struct data table_id 0x01 section_syntax_indicator 0x01 section_length 0x09 transport_stream_id 0xffff version_number 0x06 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 12. There's now 1 full packet
Deb2: TS: Calling recursively, data left 171
Deb2: TS: Stuffing bytes found data left 171
Deb1: Autoconf: CAT Need update. stored version : 0, new: 6
Deb2: TS: Full packet left: 1, we copy length 12
Deb2: TS: General information PID 1 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 14
Deb2: TS: Starting a packet PID 1 cc 14 len 12 expected len 12
Deb2: TS: First bytes 0x01 0xb0 0x09 0xff 0xff 0xcd 0x00 0x00
Deb2: TS: Struct data table_id 0x01 section_syntax_indicator 0x01 section_length 0x09 transport_stream_id 0xffff version_number 0x06 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 12. There's now 1 full packet
Deb2: TS: Calling recursively, data left 171
Deb2: TS: Stuffing bytes found data left 171
Info: Autoconf: The CAT version changed
Info: Autoconf: New CAT we force SDT update after all sections seen
Deb1: Autoconf: ---- New CAT version 6 section 0 ----
Deb1: Autoconf: It seems that we have finished to get the CAT
Deb1: Autoconf: SDT Need update. stored version : -1, new: 1
Deb2: TS: General information PID 17 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 7
Deb2: TS: Starting a packet PID 17 cc 7 len 56 expected len 56
Deb2: TS: First bytes 0x42 0xf0 0x35 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x42 section_syntax_indicator 0x01 section_length 0x35 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 56. There's now 1 full packet
Deb2: TS: Calling recursively, data left 127
Deb2: TS: Stuffing bytes found data left 127
Deb2: TS: General information PID 17 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 7
Deb2: TS: Starting a packet PID 17 cc 7 len 56 expected len 56
Deb2: TS: First bytes 0x42 0xf0 0x35 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x42 section_syntax_indicator 0x01 section_length 0x35 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 56. There's now 1 full packet
Deb2: TS: Calling recursively, data left 127
Deb2: TS: Stuffing bytes found data left 127
Deb1: Autoconf: NIT Need update. stored version : -1, new: 1
Deb2: TS: General information PID 16 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 7
Deb2: TS: Starting a packet PID 16 cc 7 len 135 expected len 135
Deb2: TS: First bytes 0x40 0xf0 0x84 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x40 section_syntax_indicator 0x01 section_length 0x84 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 135. There's now 1 full packet
Deb2: TS: Calling recursively, data left 48
Deb2: TS: Stuffing bytes found data left 48
Deb1: Autoconf: SDT Need update. stored version : -1, new: 1
Deb2: TS: Full packet left: 1, we copy length 56
Deb2: TS: General information PID 17 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 8
Deb2: TS: Starting a packet PID 17 cc 8 len 56 expected len 56
Deb2: TS: First bytes 0x42 0xf0 0x35 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x42 section_syntax_indicator 0x01 section_length 0x35 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 56. There's now 1 full packet
Deb2: TS: Calling recursively, data left 127
Deb2: TS: Stuffing bytes found data left 127
Info: Autoconf: The SDT version changed, channels description have changed
Deb1: Autoconf: -- SDT : Service Description Table (id 0x42)--
Deb2: Autoconf: -- SDT: TSID 0x0001 original_network_id 0x0001 version 1 section number 0 last section number 0 --
Deb1: Autoconf: We will update service with id : 0x1 1
Deb2: Autoconf: running_status : running
Deb1: Autoconf: free_ca_mode : 0x0
Deb1: Autoconf: service type: 0x19 : Advanced codec HD Television
Deb1: Logs: String len 20 offset 0
Deb1: Logs: String len before conversion 20 (DEBUG lenstring is 20 )
Deb2: Logs: Converted text : "CHANNELNAME" (text encoding : ISO8859-9)
nonreversible conversions 0
Deb2: Logs: Converted text : "CHANNELNAME" (text encoding : ISO8859-9)
Deb1: Autoconf: Channel SID 1 name will be updated
Deb1: Autoconf: Channel SID 1 name : "CHANNELNAME" (name encoding : ISO8859-9)
Deb1: Autoconf: It seems that we have finished to update get the channels basic info
Info: Autoconf: We update the channel names
Deb1: Autoconf: Channel SID 1 service name: "CHANNELNAME" user name: "" channel name: "CHANNELNAME"
Deb2: Autoconf: Channel name: "CHANNELNAME" LCN asked and the NIT has been seen, SAP will be sent for this channel
Info: Autoconf: We update the channel status
Info: Autoconf: Looking through all channels to see if they are ready for streaming
Deb0: Autoconf: Service OK becoming ready. Name "CHANNELNAME", id 1 type Advanced codec HD Television
Info: Autoconf: We update the channel filters
Info: Common chan: Looking through all services to update their filters
Deb0: Common chan: pid 480 added
Deb0: Common chan: Open the new filters
Deb1: DVB: Setting filter for PID 480
Info: Autoconf: We update the channel networking
Deb2: TS: Full packet left: 1, we copy length 56
Deb2: TS: General information PID 17 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 8
Deb2: TS: Starting a packet PID 17 cc 8 len 56 expected len 56
Deb2: TS: First bytes 0x42 0xf0 0x35 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x42 section_syntax_indicator 0x01 section_length 0x35 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 56. There's now 1 full packet
Deb2: TS: Calling recursively, data left 127
Deb2: TS: Stuffing bytes found data left 127
Deb0: SDT rewrite: Full SDT updated. section number 0, last_section_number 0
Deb1: SDT rewrite: New sdt version. Old : -1, new: 1
Deb0: Main: The SDT version changed, we force the update of all the channels.
Deb1: SDT rewrite: We need to rewrite the SDT for the channel 0 : "CHANNELNAME"
Deb1: SDT rewrite: table id 0x42
Deb1: SDT rewrite: Program found, we search for interesting descriptors
Deb2: SDT rewrite: We copy this descriptor : descriptor_tag 0x48 descriptor_len 36 (on 36) loop length 0 pos 0
Deb0: SDT rewrite: NEW program for channel 0 : "CHANNELNAME". service_id : 1
Deb2: TS: Full packet left: 1, we copy length 135
Deb2: TS: General information PID 16 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 8
Deb2: TS: Starting a packet PID 16 cc 8 len 135 expected len 135
Deb2: TS: First bytes 0x40 0xf0 0x84 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x40 section_syntax_indicator 0x01 section_length 0x84 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 135. There's now 1 full packet
Deb2: TS: Calling recursively, data left 48
Deb2: TS: Stuffing bytes found data left 48
Deb2: Autoconf: New NIT
Info: Autoconf: The NIT version changed, channels number could have changed !
Deb2: Autoconf: -- NIT : Network Information Table --
Deb2: Autoconf: Network id 0x01 see "http://www.dvbservices.com/identifiers/export/network_id"
Deb2: Autoconf: NIT network name descriptor
Deb2: Autoconf: NIT network descriptor_len 11
Deb1: Logs: String len 11 offset 0
Deb1: Logs: String len before conversion 11 (DEBUG lenstring is 11 )
Deb2: Logs: Converted text : "NWNAME" (text encoding : ISO8859-9)
nonreversible conversions 0
Deb2: Autoconf: network name : "NWNAME"
Deb2: Autoconf: NIT network descriptor_tag : 0xc4
Deb2: Autoconf: --- NIT ts_descriptors_loop_len 24 descriptors_loop_len 18
Deb2: Autoconf: --- NIT descriptor concerning the network id 0x0001
Deb2: Autoconf: --- NIT descriptor concerning the multiplex 0x0001 our multiplex 0x0001
Deb2: Autoconf: --- NIT descriptor --- Service list descriptor
Deb2: Autoconf: Service ID : 0x01 service type: 0x19 : Advanced codec HD Television
Deb2: Autoconf: --- descriptor done ---
Deb2: Autoconf: --- NIT descriptor --- satellite delivery system descriptor
Deb2: Autoconf: Frequency: 04080.00 MHz
Deb2: Autoconf: Orbital position: 97,0°
Deb2: Autoconf: Western position
Deb2: Autoconf: Polarization: linear - vertical
Deb2: Autoconf: Modulation system: DVB-S
Deb2: Autoconf: Constellation: QPSK
Deb2: Autoconf: Symbol rate: 029,2900 Msymbol/s
Deb2: Autoconf: Inner FEC scheme: 3/4
Deb2: Autoconf: --- descriptor done ---
Deb1: Autoconf: It seems that we have finished to get the logical channel number
Info: Autoconf: We got the NIT, we update the channel names
Deb1: Autoconf: Channel SID 1 service name: "CHANNELNAME" user name: "" channel name: "CHANNELNAME"
Deb2: Autoconf: Channel name: "CHANNELNAME" LCN asked and the NIT has been seen, SAP will be sent for this channel
Deb1: PAT Rewrite: We need to rewrite the PAT for the channel 0 : "CHANNELNAME"
Deb1: PAT Rewrite: PAT rewrite : pointer field 0x0
Deb0: PAT Rewrite: NEW program for channel 0 : "CHANNELNAME". PMT pid : 480
Deb1: Common chan: PMT Need update. stored version : -1, new: 7
Deb1: Common chan: We update the PMT for channel 0 sid 1
Deb2: TS: General information PID 480 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 13
Deb2: TS: Starting a packet PID 480 cc 13 len 101 expected len 101
Deb2: TS: First bytes 0x02 0xb0 0x62 0x00 0x01 0xcf 0x00 0x00
Deb2: TS: Struct data table_id 0x02 section_syntax_indicator 0x01 section_length 0x62 transport_stream_id 0x01 version_number 0x07 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 101. There's now 1 full packet
Deb2: TS: Calling recursively, data left 82
Deb2: TS: Stuffing bytes found data left 82
Deb1: Common chan: We update the PMT for channel 0 sid 1
Deb2: TS: Full packet left: 1, we copy length 101
Deb2: TS: General information PID 480 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 14
Deb2: TS: Starting a packet PID 480 cc 14 len 101 expected len 101
Deb2: TS: First bytes 0x02 0xb0 0x62 0x00 0x01 0xcf 0x00 0x00
Deb2: TS: Struct data table_id 0x02 section_syntax_indicator 0x01 section_length 0x62 transport_stream_id 0x01 version_number 0x07 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 101. There's now 1 full packet
Deb2: TS: Calling recursively, data left 82
Deb2: TS: Stuffing bytes found data left 82
Deb1: Autoconf: PMT (PID 480) read for configuration of channel "CHANNELNAME" with SID 1
Deb2: Autoconf: Found a CA descr in main loop at pos 9
Deb1: Autoconf: ECM PID 8191
ERRO: Autoconf: Couldn't find CAT CA system for id 0x2600
Deb0: Autoconf: CA system id 0x2600 : European Broadcasting Union
Deb1: Autoconf: Video MPEG4-AVC PID 481
Deb1: Autoconf: PID Language Code = ---
Deb1: Autoconf: Audio MPEG1 PID 482
Deb1: Autoconf: PID Language Code = eng
Deb1: Autoconf: Audio MPEG1 PID 483
Deb1: Autoconf: PID Language Code = eng
Deb1: Autoconf: Audio MPEG1 PID 484
Deb1: Autoconf: PID Language Code = eng
Deb1: Autoconf: Audio MPEG1 PID 485
Deb1: Autoconf: PID Language Code = eng
Deb1: Autoconf: PCR pid 481
Deb1: Autoconf: Detected PIDs
Deb1: Autoconf: PID 8191 type CA information (ECM) language
Deb1: Autoconf: PID 481 type Video (MPEG4-AVC) language ---
Deb1: Autoconf: PID 482 type Audio (MPEG1) language eng
Deb1: Autoconf: PID 483 type Audio (MPEG1) language eng
Deb1: Autoconf: PID 484 type Audio (MPEG1) language eng
Deb1: Autoconf: PID 485 type Audio (MPEG1) language eng
Deb1: Autoconf: PID 481 type PCR language ---
Deb1: Autoconf: Channel update number of PIDs detected 8 old 1 we check for changes
Deb0: Autoconf: PIDs update
Deb0: Autoconf: PID 8191 added type CA information (ECM) lang
Deb0: Autoconf: PID 481 added type Video (MPEG4-AVC) lang ---
Deb0: Autoconf: PID 482 added type Audio (MPEG1) lang eng
Deb0: Autoconf: PID 483 added type Audio (MPEG1) lang eng
Deb0: Autoconf: PID 484 added type Audio (MPEG1) lang eng
Deb0: Autoconf: PID 485 added type Audio (MPEG1) lang eng
Deb0: Autoconf: PID 481 added type PCR lang ---
Deb0: Autoconf: pids :
Deb0: Autoconf: 480 (PMT)
Deb0: Autoconf: 8191 (CA information (ECM))
Deb0: Autoconf: 481 (Video (MPEG4-AVC))
Deb0: Autoconf: 482 (Audio (MPEG1))
Deb0: Autoconf: 483 (Audio (MPEG1))
Deb0: Autoconf: 484 (Audio (MPEG1))
Deb0: Autoconf: 485 (Audio (MPEG1))
Deb0: Autoconf: 481 (PCR)
Deb1: Autoconf: It seems that we have finished to get the Program Map Table
Deb1: Autoconf: Number of PIDs after autoconf 8
Deb0: Autoconf: PIDs for channel 0 "CHANNELNAME" : 480 8191 481 482 483 484 485 481
Deb2: Autoconf: Primary language for channel:
Deb1: Autoconf: Channel SID 1 service name: "CHANNELNAME" user name: "" channel name: "CHANNELNAME"
Deb2: Autoconf: Channel name: "CHANNELNAME" LCN asked and the NIT has been seen, SAP will be sent for this channel
Info: Common chan: Looking through all services to update their filters
Deb0: Common chan: pid 481 added
Deb0: Common chan: pid 482 added
Deb0: Common chan: pid 483 added
Deb0: Common chan: pid 484 added
Deb0: Common chan: pid 485 added
Deb0: Common chan: pid 8191 added
Deb0: Common chan: Open the new filters
Deb1: DVB: Setting filter for PID 481
Deb1: DVB: Setting filter for PID 482
Deb1: DVB: Setting filter for PID 483
Deb1: DVB: Setting filter for PID 484
Deb1: DVB: Setting filter for PID 485
Deb1: DVB: Setting filter for PID 8191
Info: Autoconf: We update the channel CAM support
Info: Autoconf: Diffusion 1 channel
Info: Autoconf: Channel number : 0, service id 1 name : "CHANNELNAME"
Info: Autoconf: Unicast : Channel accessible via the master connection, 0.0.0.0:4242
Deb0: Autoconf: pids : 480 (PMT), 8191 (CA information (ECM) ), 481 (Video (MPEG4-AVC)), 482 (Audio (MPEG1) eng), 483 (Audio (MPEG1) eng), 484 (Audio (MPEG1) eng), 485 (Audio (MPEG1) eng), 481 (PCR),
Info: Main: Channel "CHANNELNAME" is now highly scrambled (100% of scrambled packets). Card 0

[Saentist]

Use CODE button <>

--- Build information ---
Built with CAM support.
Built with SCAM support.
Built with ATSC support.
Built with ATSC long channel names support.
Built with support for DVB API Version 5.10.
Built with support for DVB-T2.
Originally based on dvbstream 0.6 by (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://mumudvb.net/
Project from the cr@ns (http://www.crans.org/)
by Brice DUBOST ([[email protected]](mailto:[email protected]))

Deb2: Main: ==== Configuration file ====
Deb2: Main: 001 sat_number=3
Deb2: Main: 002 freq=11814
Deb2: Main: 003 pol=H
Deb2: Main: 004 srate=6400
Deb2: Main: 005 coderate=auto
Deb2: Main: 006
Deb2: Main: 007 #delivery_system=DVBS2
Deb2: Main: 008 autoconfiguration=full
Deb2: Main: 009
Deb2: Main: 010
Deb2: Main: 011 cam_support=1
Deb2: Main: 012
Deb2: Main: 013 scam_const_key=1,XX:XX:XX:XX:XX:XX:XX:XX,XX:XX:XX:XX:XX:XX:XX:XX
Deb2: Main: 014
Deb2: Main: 015 multicast_ipv4=0
Deb2: Main: 016 multicast_ipv6=0
Deb2: Main: 017 unicast=1
Deb2: Main: 018 ip_http=0.0.0.0
Deb2: Main: 019 port_http=4242
Deb2: Main: ============ done ===========
Info: CAM: You have enabled the support for conditional access modules (scrambled channels).
Info: Main: Autoconfiguration, we activate SAP announces. if you want to disable them see the README.
Info: Main: Autoconfiguration, we activate PAT rewriting. if you want to disable it see the README.
Info: Main: Autoconfiguration, we activate SDT rewriting. if you want to disable it see the README.
Info: Main: ========== End of configuration, MuMuDVB version 2.1.0_20181020_mumudvb2 is starting ==========
WARN: Main: Can't create /var/run/mumudvb/channels_streamed_adapter0_tuner0: No such file or directory
WARN: Main: Can't create /var/run/mumudvb/channels_unstreamed_adapter0_tuner0: No such file or directory
WARN: Main: Can't create /var/run/mumudvb/caminfo_adapter0_tuner0: No such file or directory
Info: Main: Streaming. Freq 11814000.000000
Info: Tune: Using DVB card "TurboSight TBS 5927 DVB-S/S2" tuner 0
Info: Tune: Tuning DVB-S to Freq: 1214000 kHz, LO frequency 10600000 kHz Pol:H Srate=6400000, LNB number: 3
Info: Tune: LNB voltage 18V
Deb0: Tune: Test Diseqc message e0 10 38 fb 00 00 len 4
Deb0: Tune: Sending first Diseqc message e0 10 38 fb 00 00 len 4
Info: Tune: DISEQC SETTING SUCCEDED
Deb0: Tune: polling....
Info: Tune: FE_STATUS:
Info: Tune: FE_HAS_SIGNAL : found something above the noise level
Info: Tune: FE_HAS_CARRIER : found a DVB signal
Info: Tune: FE_HAS_VITERBI : FEC is stable
Info: Tune: FE_HAS_SYNC : found sync bytes
Info: Tune: FE_HAS_LOCK : everything's working...
Info: Tune: Event: Frequency: 11814000 (or 9386000)
Info: Tune: SymbolRate: 6400000
Info: Tune: FEC_inner: 3
Info: Tune: Bit error rate: 0
Info: Tune: Signal strength: 42640
Info: Tune: SNR: 37064
Info: Main: Card 0, tuner 0 tuned
main 0xbfb19908
Deb1: CAM: CAM Initialization
Deb1: CAM: CONF cam_reask_interval=0
Deb1: CAM: CONF cam_reset_interval=30
Deb1: CAM: CONF cam_number=0
Deb1: CAM: CONF cam_delay_pmt_send=0
Deb1: CAM: CONF cam_interval_pmt_send=3
ERRO: CAM: Failed to create the stdcam instance (no cam present ?)
ERRO: CAM: Cannot initalise cam
Info: Common chan: Looking through all services to update their filters
Deb0: Common chan: Open the new filters
Deb1: DVB: Setting filter for PID 0
Deb1: DVB: Setting filter for PID 1
Deb1: DVB: Setting filter for PID 16
Deb1: DVB: Setting filter for PID 17
Deb1: DVB: Setting filter for PID 18
Deb1: DVB: Setting filter for PID 20
Info: Unicast: We open the Master http socket for address 0.0.0.0:4242
Deb1: Unicast : unicast : unicast_vars->pfdsnum : 1
Info: Autoconf: Autoconfiguration is now ready to work for you !
Deb1: Autoconf: PAT Need update. stored version : -1, new: 9
Deb2: TS: General information PID 0 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 10
Deb2: TS: Starting a packet PID 0 cc 10 len 20 expected len 20
Deb2: TS: First bytes 0x00 0xb0 0x11 0x00 0x01 0xd3 0x00 0x00
Deb2: TS: Struct data table_id 0x00 section_syntax_indicator 0x01 section_length 0x11 transport_stream_id 0x01 version_number 0x09 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 20. There's now 1 full packet
Deb2: TS: Calling recursively, data left 163
Deb2: TS: Stuffing bytes found data left 163
Deb2: TS: General information PID 0 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 10
Deb2: TS: Starting a packet PID 0 cc 10 len 20 expected len 20
Deb2: TS: First bytes 0x00 0xb0 0x11 0x00 0x01 0xd3 0x00 0x00
Deb2: TS: Struct data table_id 0x00 section_syntax_indicator 0x01 section_length 0x11 transport_stream_id 0x01 version_number 0x09 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 20. There's now 1 full packet
Deb2: TS: Calling recursively, data left 163
Deb2: TS: Stuffing bytes found data left 163
Deb1: Autoconf: PAT Need update. stored version : -1, new: 9
Deb2: TS: Full packet left: 1, we copy length 20
Deb2: TS: General information PID 0 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 11
Deb2: TS: Starting a packet PID 0 cc 11 len 20 expected len 20
Deb2: TS: First bytes 0x00 0xb0 0x11 0x00 0x01 0xd3 0x00 0x00
Deb2: TS: Struct data table_id 0x00 section_syntax_indicator 0x01 section_length 0x11 transport_stream_id 0x01 version_number 0x09 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 20. There's now 1 full packet
Deb2: TS: Calling recursively, data left 163
Deb2: TS: Stuffing bytes found data left 163
Info: Autoconf: The PAT version changed, channels have changed
Info: Autoconf: New PAT we force SDT update after all sections seen
Deb1: Autoconf: ---- New PAT version 9 section 0 ----
Deb2: Autoconf: -------------- Display PAT ----------------
Deb2: Autoconf: transport stream id 0x0001 section_length 17 version 9 section_number 0 last_section_number 0 current_next_indicator 1
Deb1: Autoconf: Network PID 16 (PID of the NIT)
Deb1: Autoconf: service 1 id 0x0001 1 PMT PID : 480
Deb1: Autoconf: This PAT contains 1 services
Deb2: Autoconf: -------------- PAT Displayed ----------------
Deb2: Autoconf: PAT version 9 program 1 NEW channel 1
Deb1: Autoconf: It seems that we have finished to get the channel/services list
WARN: Autoconf: Channel 0 SID 1 Force PMT update
Deb2: TS: Full packet left: 1, we copy length 20
Deb2: TS: General information PID 0 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 11
Deb2: TS: Starting a packet PID 0 cc 11 len 20 expected len 20
Deb2: TS: First bytes 0x00 0xb0 0x11 0x00 0x01 0xd3 0x00 0x00
Deb2: TS: Struct data table_id 0x00 section_syntax_indicator 0x01 section_length 0x11 transport_stream_id 0x01 version_number 0x09 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 20. There's now 1 full packet
Deb2: TS: Calling recursively, data left 163
Deb2: TS: Stuffing bytes found data left 163
Deb1: PAT Rewrite: Full PAT updated
Deb1: PAT Rewrite: New pat version. Old : -1, new: 9
Deb2: PAT Rewrite: -------------- Display PAT ----------------
Deb2: PAT Rewrite: transport stream id 0x0001 section_length 17 version 9 section_number 0 last_section_number 0 current_next_indicator 1
Deb1: PAT Rewrite: Network PID 16 (PID of the NIT)
Deb1: PAT Rewrite: service 1 id 0x0001 1 PMT PID : 480
Deb1: PAT Rewrite: This PAT contains 1 services
Deb2: PAT Rewrite: -------------- PAT Displayed ----------------
Deb2: TS: Full packet left: 1, we copy length 20
Deb1: PAT Rewrite: Full PAT updated
Deb2: PAT Rewrite: -------------- Display PAT ----------------
Deb2: PAT Rewrite: transport stream id 0x0001 section_length 17 version 9 section_number 0 last_section_number 0 current_next_indicator 1
Deb1: PAT Rewrite: Network PID 16 (PID of the NIT)
Deb1: PAT Rewrite: service 1 id 0x0001 1 PMT PID : 480
Deb1: PAT Rewrite: This PAT contains 1 services
Deb2: PAT Rewrite: -------------- PAT Displayed ----------------
Deb1: Autoconf: CAT Need update. stored version : 0, new: 6
Deb2: TS: General information PID 1 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 13
Deb2: TS: Starting a packet PID 1 cc 13 len 12 expected len 12
Deb2: TS: First bytes 0x01 0xb0 0x09 0xff 0xff 0xcd 0x00 0x00
Deb2: TS: Struct data table_id 0x01 section_syntax_indicator 0x01 section_length 0x09 transport_stream_id 0xffff version_number 0x06 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 12. There's now 1 full packet
Deb2: TS: Calling recursively, data left 171
Deb2: TS: Stuffing bytes found data left 171
Deb1: Autoconf: CAT Need update. stored version : 0, new: 6
Deb2: TS: Full packet left: 1, we copy length 12
Deb2: TS: General information PID 1 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 14
Deb2: TS: Starting a packet PID 1 cc 14 len 12 expected len 12
Deb2: TS: First bytes 0x01 0xb0 0x09 0xff 0xff 0xcd 0x00 0x00
Deb2: TS: Struct data table_id 0x01 section_syntax_indicator 0x01 section_length 0x09 transport_stream_id 0xffff version_number 0x06 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 12. There's now 1 full packet
Deb2: TS: Calling recursively, data left 171
Deb2: TS: Stuffing bytes found data left 171
Info: Autoconf: The CAT version changed
Info: Autoconf: New CAT we force SDT update after all sections seen
Deb1: Autoconf: ---- New CAT version 6 section 0 ----
Deb1: Autoconf: It seems that we have finished to get the CAT
Deb1: Autoconf: SDT Need update. stored version : -1, new: 1
Deb2: TS: General information PID 17 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 7
Deb2: TS: Starting a packet PID 17 cc 7 len 56 expected len 56
Deb2: TS: First bytes 0x42 0xf0 0x35 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x42 section_syntax_indicator 0x01 section_length 0x35 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 56. There's now 1 full packet
Deb2: TS: Calling recursively, data left 127
Deb2: TS: Stuffing bytes found data left 127
Deb2: TS: General information PID 17 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 7
Deb2: TS: Starting a packet PID 17 cc 7 len 56 expected len 56
Deb2: TS: First bytes 0x42 0xf0 0x35 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x42 section_syntax_indicator 0x01 section_length 0x35 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 56. There's now 1 full packet
Deb2: TS: Calling recursively, data left 127
Deb2: TS: Stuffing bytes found data left 127
Deb1: Autoconf: NIT Need update. stored version : -1, new: 1
Deb2: TS: General information PID 16 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 7
Deb2: TS: Starting a packet PID 16 cc 7 len 135 expected len 135
Deb2: TS: First bytes 0x40 0xf0 0x84 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x40 section_syntax_indicator 0x01 section_length 0x84 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 135. There's now 1 full packet
Deb2: TS: Calling recursively, data left 48
Deb2: TS: Stuffing bytes found data left 48
Deb1: Autoconf: SDT Need update. stored version : -1, new: 1
Deb2: TS: Full packet left: 1, we copy length 56
Deb2: TS: General information PID 17 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 8
Deb2: TS: Starting a packet PID 17 cc 8 len 56 expected len 56
Deb2: TS: First bytes 0x42 0xf0 0x35 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x42 section_syntax_indicator 0x01 section_length 0x35 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 56. There's now 1 full packet
Deb2: TS: Calling recursively, data left 127
Deb2: TS: Stuffing bytes found data left 127
Info: Autoconf: The SDT version changed, channels description have changed
Deb1: Autoconf: -- SDT : Service Description Table (id 0x42)--
Deb2: Autoconf: -- SDT: TSID 0x0001 original_network_id 0x0001 version 1 section number 0 last section number 0 --
Deb1: Autoconf: We will update service with id : 0x1 1
Deb2: Autoconf: running_status : running
Deb1: Autoconf: free_ca_mode : 0x0
Deb1: Autoconf: service type: 0x19 : Advanced codec HD Television
Deb1: Logs: String len 20 offset 0
Deb1: Logs: String len before conversion 20 (DEBUG lenstring is 20 )
Deb2: Logs: Converted text : "CHANNELNAME" (text encoding : ISO8859-9)
nonreversible conversions 0
Deb2: Logs: Converted text : "CHANNELNAME" (text encoding : ISO8859-9)
Deb1: Autoconf: Channel SID 1 name will be updated
Deb1: Autoconf: Channel SID 1 name : "CHANNELNAME" (name encoding : ISO8859-9)
Deb1: Autoconf: It seems that we have finished to update get the channels basic info
Info: Autoconf: We update the channel names
Deb1: Autoconf: Channel SID 1 service name: "CHANNELNAME" user name: "" channel name: "CHANNELNAME"
Deb2: Autoconf: Channel name: "CHANNELNAME" LCN asked and the NIT has been seen, SAP will be sent for this channel
Info: Autoconf: We update the channel status
Info: Autoconf: Looking through all channels to see if they are ready for streaming
Deb0: Autoconf: Service OK becoming ready. Name "CHANNELNAME", id 1 type Advanced codec HD Television
Info: Autoconf: We update the channel filters
Info: Common chan: Looking through all services to update their filters
Deb0: Common chan: pid 480 added
Deb0: Common chan: Open the new filters
Deb1: DVB: Setting filter for PID 480
Info: Autoconf: We update the channel networking
Deb2: TS: Full packet left: 1, we copy length 56
Deb2: TS: General information PID 17 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 8
Deb2: TS: Starting a packet PID 17 cc 8 len 56 expected len 56
Deb2: TS: First bytes 0x42 0xf0 0x35 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x42 section_syntax_indicator 0x01 section_length 0x35 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 56. There's now 1 full packet
Deb2: TS: Calling recursively, data left 127
Deb2: TS: Stuffing bytes found data left 127
Deb0: SDT rewrite: Full SDT updated. section number 0, last_section_number 0
Deb1: SDT rewrite: New sdt version. Old : -1, new: 1
Deb0: Main: The SDT version changed, we force the update of all the channels.
Deb1: SDT rewrite: We need to rewrite the SDT for the channel 0 : "CHANNELNAME"
Deb1: SDT rewrite: table id 0x42
Deb1: SDT rewrite: Program found, we search for interesting descriptors
Deb2: SDT rewrite: We copy this descriptor : descriptor_tag 0x48 descriptor_len 36 (on 36) loop length 0 pos 0
Deb0: SDT rewrite: NEW program for channel 0 : "CHANNELNAME". service_id : 1
Deb2: TS: Full packet left: 1, we copy length 135
Deb2: TS: General information PID 16 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 8
Deb2: TS: Starting a packet PID 16 cc 8 len 135 expected len 135
Deb2: TS: First bytes 0x40 0xf0 0x84 0x00 0x01 0xc3 0x00 0x00
Deb2: TS: Struct data table_id 0x40 section_syntax_indicator 0x01 section_length 0x84 transport_stream_id 0x01 version_number 0x01 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 135. There's now 1 full packet
Deb2: TS: Calling recursively, data left 48
Deb2: TS: Stuffing bytes found data left 48
Deb2: Autoconf: New NIT
Info: Autoconf: The NIT version changed, channels number could have changed !
Deb2: Autoconf: -- NIT : Network Information Table --
Deb2: Autoconf: Network id 0x01 see "http://www.dvbservices.com/identifiers/export/network_id"
Deb2: Autoconf: NIT network name descriptor
Deb2: Autoconf: NIT network descriptor_len 11
Deb1: Logs: String len 11 offset 0
Deb1: Logs: String len before conversion 11 (DEBUG lenstring is 11 )
Deb2: Logs: Converted text : "NWNAME" (text encoding : ISO8859-9)
nonreversible conversions 0
Deb2: Autoconf: network name : "NWNAME"
Deb2: Autoconf: NIT network descriptor_tag : 0xc4
Deb2: Autoconf: --- NIT ts_descriptors_loop_len 24 descriptors_loop_len 18
Deb2: Autoconf: --- NIT descriptor concerning the network id 0x0001
Deb2: Autoconf: --- NIT descriptor concerning the multiplex 0x0001 our multiplex 0x0001
Deb2: Autoconf: --- NIT descriptor --- Service list descriptor
Deb2: Autoconf: Service ID : 0x01 service type: 0x19 : Advanced codec HD Television
Deb2: Autoconf: --- descriptor done ---
Deb2: Autoconf: --- NIT descriptor --- satellite delivery system descriptor
Deb2: Autoconf: Frequency: 04080.00 MHz
Deb2: Autoconf: Orbital position: 97,0°
Deb2: Autoconf: Western position
Deb2: Autoconf: Polarization: linear - vertical
Deb2: Autoconf: Modulation system: DVB-S
Deb2: Autoconf: Constellation: QPSK
Deb2: Autoconf: Symbol rate: 029,2900 Msymbol/s
Deb2: Autoconf: Inner FEC scheme: 3/4
Deb2: Autoconf: --- descriptor done ---
Deb1: Autoconf: It seems that we have finished to get the logical channel number
Info: Autoconf: We got the NIT, we update the channel names
Deb1: Autoconf: Channel SID 1 service name: "CHANNELNAME" user name: "" channel name: "CHANNELNAME"
Deb2: Autoconf: Channel name: "CHANNELNAME" LCN asked and the NIT has been seen, SAP will be sent for this channel
Deb1: PAT Rewrite: We need to rewrite the PAT for the channel 0 : "CHANNELNAME"
Deb1: PAT Rewrite: PAT rewrite : pointer field 0x0
Deb0: PAT Rewrite: NEW program for channel 0 : "CHANNELNAME". PMT pid : 480
Deb1: Common chan: PMT Need update. stored version : -1, new: 7
Deb1: Common chan: We update the PMT for channel 0 sid 1
Deb2: TS: General information PID 480 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 13
Deb2: TS: Starting a packet PID 480 cc 13 len 101 expected len 101
Deb2: TS: First bytes 0x02 0xb0 0x62 0x00 0x01 0xcf 0x00 0x00
Deb2: TS: Struct data table_id 0x02 section_syntax_indicator 0x01 section_length 0x62 transport_stream_id 0x01 version_number 0x07 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 101. There's now 1 full packet
Deb2: TS: Calling recursively, data left 82
Deb2: TS: Stuffing bytes found data left 82
Deb1: Common chan: We update the PMT for channel 0 sid 1
Deb2: TS: Full packet left: 1, we copy length 101
Deb2: TS: General information PID 480 adaptation_field_control 1 payload_unit_start_indicator 1 continuity_counter 14
Deb2: TS: Starting a packet PID 480 cc 14 len 101 expected len 101
Deb2: TS: First bytes 0x02 0xb0 0x62 0x00 0x01 0xcf 0x00 0x00
Deb2: TS: Struct data table_id 0x02 section_syntax_indicator 0x01 section_length 0x62 transport_stream_id 0x01 version_number 0x07 current_next_indicator 0x01 last_section_number 0x00
Deb2: TS: New full packet len 101. There's now 1 full packet
Deb2: TS: Calling recursively, data left 82
Deb2: TS: Stuffing bytes found data left 82
Deb1: Autoconf: PMT (PID 480) read for configuration of channel "CHANNELNAME" with SID 1
Deb2: Autoconf: Found a CA descr in main loop at pos 9
Deb1: Autoconf: ECM PID 8191
ERRO: Autoconf: Couldn't find CAT CA system for id 0x2600
Deb0: Autoconf: CA system id 0x2600 : European Broadcasting Union
Deb1: Autoconf: Video MPEG4-AVC PID 481
Deb1: Autoconf: PID Language Code = ---
Deb1: Autoconf: Audio MPEG1 PID 482
Deb1: Autoconf: PID Language Code = eng
Deb1: Autoconf: Audio MPEG1 PID 483
Deb1: Autoconf: PID Language Code = eng
Deb1: Autoconf: Audio MPEG1 PID 484
Deb1: Autoconf: PID Language Code = eng
Deb1: Autoconf: Audio MPEG1 PID 485
Deb1: Autoconf: PID Language Code = eng
Deb1: Autoconf: PCR pid 481
Deb1: Autoconf: Detected PIDs
Deb1: Autoconf: PID 8191 type CA information (ECM) language
Deb1: Autoconf: PID 481 type Video (MPEG4-AVC) language ---
Deb1: Autoconf: PID 482 type Audio (MPEG1) language eng
Deb1: Autoconf: PID 483 type Audio (MPEG1) language eng
Deb1: Autoconf: PID 484 type Audio (MPEG1) language eng
Deb1: Autoconf: PID 485 type Audio (MPEG1) language eng
Deb1: Autoconf: PID 481 type PCR language ---
Deb1: Autoconf: Channel update number of PIDs detected 8 old 1 we check for changes
Deb0: Autoconf: PIDs update
Deb0: Autoconf: PID 8191 added type CA information (ECM) lang
Deb0: Autoconf: PID 481 added type Video (MPEG4-AVC) lang ---
Deb0: Autoconf: PID 482 added type Audio (MPEG1) lang eng
Deb0: Autoconf: PID 483 added type Audio (MPEG1) lang eng
Deb0: Autoconf: PID 484 added type Audio (MPEG1) lang eng
Deb0: Autoconf: PID 485 added type Audio (MPEG1) lang eng
Deb0: Autoconf: PID 481 added type PCR lang ---
Deb0: Autoconf: pids :
Deb0: Autoconf: 480 (PMT)
Deb0: Autoconf: 8191 (CA information (ECM))
Deb0: Autoconf: 481 (Video (MPEG4-AVC))
Deb0: Autoconf: 482 (Audio (MPEG1))
Deb0: Autoconf: 483 (Audio (MPEG1))
Deb0: Autoconf: 484 (Audio (MPEG1))
Deb0: Autoconf: 485 (Audio (MPEG1))
Deb0: Autoconf: 481 (PCR)
Deb1: Autoconf: It seems that we have finished to get the Program Map Table
Deb1: Autoconf: Number of PIDs after autoconf 8
Deb0: Autoconf: PIDs for channel 0 "CHANNELNAME" : 480 8191 481 482 483 484 485 481
Deb2: Autoconf: Primary language for channel:
Deb1: Autoconf: Channel SID 1 service name: "CHANNELNAME" user name: "" channel name: "CHANNELNAME"
Deb2: Autoconf: Channel name: "CHANNELNAME" LCN asked and the NIT has been seen, SAP will be sent for this channel
Info: Common chan: Looking through all services to update their filters
Deb0: Common chan: pid 481 added
Deb0: Common chan: pid 482 added
Deb0: Common chan: pid 483 added
Deb0: Common chan: pid 484 added
Deb0: Common chan: pid 485 added
Deb0: Common chan: pid 8191 added
Deb0: Common chan: Open the new filters
Deb1: DVB: Setting filter for PID 481
Deb1: DVB: Setting filter for PID 482
Deb1: DVB: Setting filter for PID 483
Deb1: DVB: Setting filter for PID 484
Deb1: DVB: Setting filter for PID 485
Deb1: DVB: Setting filter for PID 8191
Info: Autoconf: We update the channel CAM support
Info: Autoconf: Diffusion 1 channel
Info: Autoconf: Channel number : 0, service id 1 name : "CHANNELNAME"
Info: Autoconf: Unicast : Channel accessible via the master connection, 0.0.0.0:4242
Deb0: Autoconf: pids : 480 (PMT), 8191 (CA information (ECM) ), 481 (Video (MPEG4-AVC)), 482 (Audio (MPEG1) eng), 483 (Audio (MPEG1) eng), 484 (Audio (MPEG1) eng), 485 (Audio (MPEG1) eng), 481 (PCR),
Info: Main: Channel "CHANNELNAME" is now highly scrambled (100% of scrambled packets). Card 0

cam_support=1
Do you have CI CAM module?
With sat position is this?

run this command to run mumudvb without PID error

sudo mkdir /var/run/mumudvb/

[juankr10s]

no, i don't have a ci cam module.
i test other transponder and it opens correctly
in summary: only does not open the transponder 11814 and only open whit static key in vlc

[anphsw]

It seems like problem is "ERRO: Autoconf: Couldn't find CAT CA system for id 0x2600".
Proper handling for this ID needed to activate descrambling.

[braice]

Hello There were some bugs related to the parsing of the descriptors that were fixed a few months ago. Does a fresh from git version solves the problem? Brice

…

On Sun, Apr 30, 2023 at 5:02 AM anphsw ***@***.***> wrote: It seems like problem is "ERRO: Autoconf: Couldn't find CAT CA system for id 0x2600". Proper handling for this ID needed to activate descrambling. — Reply to this email directly, view it on GitHub <#302 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AACRIDYZKFTQENCMN2EIVVLXDXI5ZANCNFSM6AAAAAATYLUKHU> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>