Firmware for 24/48V BMS board using bq76930 (max. 10s cells)
This is a development fork of the firmware for the LibreSolar BMS project at http://libre.solar to which it adds some extensions:
-
support for SSD1306 OLED display on I2C-bus
-
continuos output of logging samples via USART TX/RX on the Cortex SWD connector of the BMS. It can be used with a ST-LINK/V2-1 debugger/programmer of a Nucleo board (F072RB) for updating and debugging the firmware and for transmitting the logging-data.