Skip to content

cgruver/che-quarkus-demo

BranchesTags

Repository files navigation

Demo for Quarkus Dev Mode in OpenShift Dev Spaces / Eclipse Che

This project is a quick demo to show you how you can leverage Quarkus Dev Services in OpenShift Dev Spaces / Eclipse Che.

If you are not familiar with Quarkus Dev Services, check it out here: https://quarkus.io/guides/dev-services

Because running nested containers is not yet supported in OpenShift without completely trashing its security posture, we are going to use a clever resource to assist us. Check out the Kubedock project. It is going to allow us to mimic a running Docker service in our Dev Spaces environment. https://github.com/joyrex2001/kubedock

Prerequisite

You will need access to an OpenShift cluster with the Dev Spaces or Eclipse Che operator installed.

You can run this on your local workstation by using OpenShift Local. It will be a bit sluggish because you're running a LOT of infrastructure on a single node, but it does work. The more CPU and RAM you can give it the better. I ran it with 16GB of RAM and 6 CPUs while developing this demo.

Follow these instructions to set up OpenShift Local: Install OpenShift Local and OpenShift Dev Spaces

Setup to Run The Demo

Before we run the demo, there are a few things to set up.

We are going to:

  • Create a namespace for OpenShift Dev Spaces workspace container images.
  • Grant all service accounts in the cluster permission to pull images from the new namespace
  • Create a BuildConfig of a Quarkus tooling image We are doing this partially to save time during deployment, to avoid pulling a large image across the internet. But, also to show you that you can... Note: The custom workspace image that we are going to create includes Kubedock which is an essential part of this demo.
  • Build the Quarkus Tooling Image

  1. You don't need cluster admin privileges for this. You can run it as a normal user with namespace provisioning privileges, which are enabled out of the box.

    If you are using OpenShift local, log in from a terminal as the developer user.

    oc login -u developer https://api.crc.testing:6443

  2. Create a namespace to hold workspace container images:

    cat << EOF | oc apply -f -
apiVersion: v1
kind: Namespace
metadata:
  name: eclipse-che-images
EOF

  3. Create a RoleBinding to grant permission for service accounts to pull images from this namespace:

    cat << EOF | oc apply -f -
apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  name: system:image-puller
  namespace: eclipse-che-images
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: system:image-puller
subjects:
- apiGroup: rbac.authorization.k8s.io
  kind: Group
  name: system:serviceaccounts
EOF

  4. Create an ImageStream for a Quarkus tooling image

    cat << EOF | oc apply -f -
apiVersion: image.openshift.io/v1
kind: ImageStream
metadata:
  name: quarkus
  namespace: eclipse-che-images
EOF

  5. Create the BuildConfig for our Quarkus image.

    Note two things here:

    1. We are using an embedded Dockerfile to build the image.

    2. We are grabbing files from two other images and copying them into our new image.

      Note: I have created an image in my Quay.io account which has the tooling for this workspace demo in it. The image is a From scratch image which is used purely as a container to hold files to be added to other images. You can see the Dockerfile and build script for it in the ./quarkus-tools directory of this project. I sometimes do this to provide packaging for environments that have limited internet access. It's a great way to ensure consistent versioning, and provide security scanning for the open source tooling that you might pull from Github for example.

    cat << EOF | oc apply -f -
apiVersion: build.openshift.io/v1
kind: BuildConfig
metadata:
  name: quarkus
  namespace: eclipse-che-images
spec:
  source:
    dockerfile: |
      FROM registry.access.redhat.com/ubi9/ubi-minimal
      ARG USER_HOME_DIR="/home/user"
      ARG WORK_DIR="/projects"
      ARG JAVA_PACKAGE=java-17-openjdk-devel
      ARG USER_HOME_DIR="/home/user"
      ARG WORK_DIR="/projects"
      ARG TOOLS_IMAGE="quay.io/cgruver0/che/quarkus-tools"
      ARG TOOLS_IMAGE_TAG="latest"
      ARG OC_IMAGE="image-registry.openshift-image-registry.svc:5000/openshift/cli"
      ARG OC_IMAGE_TAG="latest"
      ENV HOME=\${USER_HOME_DIR}
      ENV BUILDAH_ISOLATION=chroot
      ENV LANG='en_US.UTF-8' LANGUAGE='en_US:en' LC_ALL='en_US.UTF-8'
      ENV MAVEN_HOME=/usr/share/maven
      ENV MAVEN_CONFIG="\${HOME}/.m2"
      ENV GRAALVM_HOME=/usr/local/tools/graalvm
      ENV JAVA_HOME=/etc/alternatives/jre_17_openjdk
      # copy Maven, Graalvm, Quarkus CLI, Kubedock, and some other tools from my quarkus tools image.
      COPY --from=\${TOOLS_IMAGE}:\${TOOLS_IMAGE_TAG} /tools/ /usr/local/tools
      # Copy the OpenShift CLI from the cli image in the internal registry
      COPY --from=\${OC_IMAGE}:\${OC_IMAGE_TAG} /usr/bin/oc /usr/bin/oc
      COPY --from=\${OC_IMAGE}:\${OC_IMAGE_TAG}  /usr/bin/kubectl /usr/bin/kubectl
      RUN microdnf --disableplugin=subscription-manager install -y openssl compat-openssl11 libbrotli git tar gzip zip unzip which shadow-utils bash zsh wget jq podman buildah skopeo glibc-devel zlib-devel gcc libffi-devel libstdc++-devel gcc-c++ glibc-langpack-en ca-certificates \${JAVA_PACKAGE}; \
        microdnf update -y ; \
        microdnf clean all ; \
        mkdir -p \${USER_HOME_DIR} ; \
        mkdir -p \${WORK_DIR} ; \
        mkdir -p /usr/local/bin ; \
        setcap cap_setuid+ep /usr/bin/newuidmap ; \
        setcap cap_setgid+ep /usr/bin/newgidmap ; \
        mkdir -p \${HOME}/.config/containers ; \
        (echo '[storage]';echo 'driver = "vfs"') > \${HOME}/.config/containers/storage.conf ; \
        touch /etc/subgid /etc/subuid ; \
        chmod -R g=u /etc/passwd /etc/group /etc/subuid /etc/subgid ; \
        echo user:20000:65536 > /etc/subuid  ; \
        echo user:20000:65536 > /etc/subgid ; \
        chgrp -R 0 /home ; \
        chmod -R g=u /home \${WORK_DIR}
      USER 10001
      ENV PATH=\${PATH}:/usr/local/tools/bin
      WORKDIR \${WORK_DIR}
      CMD [ "tail", "-f", "/dev/null" ]
  strategy:
    type: Docker
  output:
    to:
      kind: ImageStreamTag
      name: quarkus:latest
EOF

  6. Build the image:

    oc start-build quarkus -n eclipse-che-images -F

Log into OpenShift Dev Spaces

Next, we need to log into OpenShift Dev Spaces. We not going to do anything with it yet, because we need to make a change to the namespace that Dev Spaces will provision for us.

  1. Get the URL for the dev-spaces route:

    echo https://$(oc get route devspaces -n openshift-devspaces -o jsonpath={.spec.host})

  2. Paste that URL into your browser and click Log in with OpenShift

  3. Log in with user: developer, password: developer:

  4. The first time, you will be asked to authorize access:

    Click Allow selected permissions:

  5. You should now be at the Dev Spaces dashboard:

Add a role to your user

At this point we need to take a quick detour back to the terminal with cluster-admin privileges. One capability that Kubedock needs in order to enable Quarkus Dev Services is not yet in Dev Spaces. We need the ability to create port-forward from a pod in our namespace back to a running shell in our workspace. The Kubedock utility that we are using, also needs the ability to list Jobs in our namespace.

Let's add that ability now, by creating a new ClusterRole, and binding our user to it in the namespace that Dev Spaces has provisioned for us.

  1. Open a terminal and login to the OpenShift cluster as a user with cluster-admin privileges:

    If you are using OpenShift Local, it looks like this:

    oc login -u kubeadmin https://api.crc.testing:6443

    Note: If you followed my OpenShift Local install instructions, then your kubeadmin password is crc-admin. If you did your own install, the you can get the password by running: crc console --credentials

  2. Create the cluster role:

    cat << EOF | oc apply -f -
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  name: quarkus-dev-services
rules:
- apiGroups:
  - batch
  resources:
  - jobs
  - jobs/status
  verbs:
  - get
  - list
  - watch
- apiGroups:
  - ""
  resources:
  - pods/portforward
  verbs:
  - get
  - list
  - watch
  - create
  - delete
  - deletecollection
  - patch
  - update
EOF

  3. Add that role to your user in the provisioned namespace:

    oc policy add-role-to-user quarkus-dev-services developer -n developer-devspaces

Create A Workspace

Now, we are ready to create a namespace and run the demo:

  1. Go back to the Dev Spaces dashboard that we logged into previously:

  2. In the Import from Git form, paste the Git URL for this project:

  3. You should now see the workspace starting:

  4. After the workspace starts, you should see the VS Code landing page:

  5. There is a very simple VS Code workspace file included with this project. Dev Spaces will detect this and prompt you to open the workspace:

Demo Quarkus Dev Services for Integration Testing

I have included code for a simple Quarkus app that will use a KeyCloak OIDC provider service as part of the integration testing for this demo. Check out the OIDC dev service here: https://quarkus.io/guides/security-openid-connect-dev-services

The code for the REST resource and test are below:

src/test/java/org/acme/GreetingResourceTest.java

package org.acme;

import io.quarkus.test.junit.QuarkusTest;
import org.junit.jupiter.api.Test;
import static io.restassured.RestAssured.given;
import static org.hamcrest.CoreMatchers.is;
import io.quarkus.test.keycloak.client.KeycloakTestClient;

@QuarkusTest
public class GreetingResourceTest {

    KeycloakTestClient keycloak = new KeycloakTestClient();

    @Test
    public void testHelloEndpoint() {
        given()
          .auth().oauth2(getAccessToken("alice"))
          .when().get("/hello")
          .then()
             .statusCode(200)
             .body(is("Hello from RESTEasy Reactive"));
    }
    protected String getAccessToken(String user) {
        return keycloak.getAccessToken(user);
    }
}

src/main/java/org/acme/GreetingResource.java

package org.acme;

import javax.ws.rs.GET;
import javax.ws.rs.Path;
import javax.ws.rs.Produces;
import javax.ws.rs.core.MediaType;
import io.quarkus.security.Authenticated;
import javax.annotation.security.RolesAllowed;

@Path("/hello")
@Authenticated
public class GreetingResource {

    @GET
    @Produces(MediaType.TEXT_PLAIN)
    @RolesAllowed({"user","admin"})
    public String hello() {
        return "Hello from RESTEasy Reactive";
    }
}

Run the Demo

  1. In the top left of your workspace, open a Terminal:

    Select New Terminal

  2. In the bottom left menu of the terminal pane, open a split terminal:

  3. In the right hand terminal, start the kubedock server:

    kubedock server --port-forward

    Note: You can answer No to the dialogs that pop up about port redirects during this demo:

  4. In the left hand terminal, run the tests for the demo app:

    mvn test

  5. Observe the tests run against a KeyCloak server provisioned by kubedock:

    Image

Pretty cool! Right!?

About

Demo for Quarkus Dev Mode in Eclipse Che

Topics

kubernetes openshift eclipse-che quarkus

Resources

Readme

License

GPL-3.0 license
Activity

Stars

2 stars

Watchers

2 watching

Forks

1 fork
Report repository

Releases

No releases published

Packages

No packages published

Languages