Add files via upload

hello.cmd

@@ -0,0 +1,118 @@
+/*
+ * Copyright (c) 2017, Texas Instruments Incorporated
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * *  Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ * *  Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * *  Neither the name of Texas Instruments Incorporated nor the names of
+ *    its contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ *  ======== CC26X2R1_LAUNCHXL.cmd ========
+ */
+
+--stack_size=1024   /* C stack is also used for ISR stack */
+
+HEAPSIZE = 0x1000;  /* Size of heap buffer used by HeapMem */
+
+/* Retain interrupt vector table variable                                    */
+--retain=g_pfnVectors
+/* Override default entry point.                                             */
+--entry_point ResetISR
+/* Allow main() to take args                                                 */
+--args 0x8
+/* Suppress warnings and errors:                                             */
+/* - 10063: Warning about entry point not being _c_int00                     */
+/* - 16011, 16012: 8-byte alignment errors. Observed when linking in object  */
+/*   files compiled using Keil (ARM compiler)                                */
+--diag_suppress=10063,16011,16012
+
+/* The following command line options are set as part of the CCS project.    */
+/* If you are building using the command line, or for some reason want to    */
+/* define them here, you can uncomment and modify these lines as needed.     */
+/* If you are using CCS for building, it is probably better to make any such */
+/* modifications in your CCS project and leave this file alone.              */
+/*                                                                           */
+/* --heap_size=0                                                             */
+/* --stack_size=256                                                          */
+/* --library=rtsv7M3_T_le_eabi.lib                                           */
+
+/* The starting address of the application.  Normally the interrupt vectors  */
+/* must be located at the beginning of the application.                      */
+#define FLASH_BASE              0x0
+#define FLASH_SIZE              0x58000
+#define RAM_BASE                0x20000000
+#define RAM_SIZE                0x14000
+#define GPRAM_BASE              0x11000000
+#define GPRAM_SIZE              0x2000
+
+
+/* System memory map */
+
+MEMORY
+{
+    /* Application stored in and executes from internal flash */
+    FLASH (RX) : origin = FLASH_BASE, length = FLASH_SIZE
+    /* Application uses internal RAM for data */
+    SRAM (RWX) : origin = RAM_BASE, length = RAM_SIZE
+    /* Application can use GPRAM region as RAM if cache is disabled in the CCFG
+    (DEFAULT_CCFG_SIZE_AND_DIS_FLAGS.SET_CCFG_SIZE_AND_DIS_FLAGS_DIS_GPRAM = 0) */
+    GPRAM (RWX): origin = GPRAM_BASE, length = GPRAM_SIZE
+}
+
+/* Section allocation in memory */
+
+SECTIONS
+{
+    .intvecs        :   > FLASH_BASE
+    .text           :   >> FLASH
+    .TI.ramfunc     : {} load=FLASH, run=SRAM, table(BINIT)
+    .const          :   >> FLASH
+    .constdata      :   >> FLASH
+    .rodata         :   >> FLASH
+    .binit          :   > FLASH
+    .cinit          :   > FLASH
+    .pinit          :   > FLASH
+    .init_array     :   > FLASH
+    .emb_text       :   >> FLASH
+    .ccfg           :   > FLASH (HIGH)
+
+    .vtable         :   > SRAM
+    .vtable_ram     :   > SRAM
+     vtable_ram     :   > SRAM
+    .data           :   > SRAM
+    .bss            :   > SRAM
+    .sysmem         :   > SRAM
+    .stack          :   > SRAM (HIGH)
+    .nonretenvar    :   > SRAM
+    /* Heap buffer used by HeapMem */
+    .priheap   : {
+        __primary_heap_start__ = .;
+        . += HEAPSIZE;
+        __primary_heap_end__ = .;
+    } > SRAM align 8
+    .gpram          :   > GPRAM
+}