4.18-rc1 #30

frank-w · 2018-06-17T15:03:18Z

merge 4.18-rc1

Add alias definition for module autoload when adding socket rules. Fixes: 554ced0 ("netfilter: nf_tables: add support for native socket matching") Signed-off-by: Pablo Neira Ayuso <[email protected]>

NFT_SET_EVAL is signalling the kernel that this sets can be updated from the evaluation path, even if there are no expressions attached to the element. Otherwise, set updates with no expressions fail. Update description to describe the right semantics. Fixes: 22fe54d ("netfilter: nf_tables: add support for dynamic set updates") Signed-off-by: Pablo Neira Ayuso <[email protected]>

We must first remove the nfnetlink protocol handler when nf_tables module is unloaded -- we don't want userspace to submit new change requests once we've started to tear down nft state. Furthermore, nfnetlink must not call any subsystem function after call_batch returned -EAGAIN. EAGAIN means the subsys mutex was dropped, so its unlikely but possible that nf_tables subsystem was removed due to 'rmmod nf_tables' on another cpu. Therefore, we must abort batch completely and not move on to next part of the batch. Last, we can't invoke ->abort unless we've checked that the subsystem is still registered. Change netns exit path of nf_tables to make sure any incompleted transaction gets removed on exit. Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>

If net namespace is exiting while nf_tables module is being removed we can oops: BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 IP: nf_tables_flowtable_event+0x43/0xf0 [nf_tables] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Modules linked in: nf_tables(-) nfnetlink [..] unregister_netdevice_notifier+0xdd/0x130 nf_tables_module_exit+0x24/0x3a [nf_tables] SyS_delete_module+0x1c5/0x240 do_syscall_64+0x74/0x190 Avoid this by attempting to take reference on the net namespace from the notifiers. If it fails the namespace is exiting already, and nft core is taking care of cleanup work. We also need to make sure the netdev hook type gets removed before netns ops removal, else notifier might be invoked with device event for a netns where net->nft was never initialised (because pernet ops was removed beforehand). Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>

…ain() When depth of chain is bigger than NFT_JUMP_STACK_SIZE, the nft_do_chain crashes. But there is no need to crash hard here. Suggested-by: Florian Westphal <[email protected]> Signed-off-by: Taehee Yoo <[email protected]> Acked-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>

Dan Carpenter points out that deref occurs after NULL check, we should re-fetch the pointer and check that instead. Fixes: 2c205dd ("netfilter: add struct nf_nat_hook and use it") Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>

This needs to use xt_unregister_targets, else new revision is left on the list which then causes list to point to a target struct that has been free'd. Fixes: 472a73e ("netfilter: xt_conntrack: Support bit-shifting for CONNMARK & MARK targets.") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>

Currently, we use check_hlist() for garbage colleciton. However, we use the ‘zone’ from the counted entry to query the existence of existing entries in the hlist. This could be wrong when they are in different zones, and this patch fixes this issue. Fixes: e59ea3d ("netfilter: xt_connlimit: honor conntrack zone if available") Signed-off-by: Yi-Hung Wei <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>

… sockets" Revert the patch mentioned in the subject because it breaks at least the Avahi mDNS daemon. That patch namely causes the Ubuntu 18.04 Avahi daemon to fail to start: Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: Successfully called chroot(). Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: Successfully dropped remaining capabilities. Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: No service file found in /etc/avahi/services. Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: SO_REUSEADDR failed: Structure needs cleaning Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: SO_REUSEADDR failed: Structure needs cleaning Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: Failed to create server: No suitable network protocol available Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: avahi-daemon 0.7 exiting. Jun 12 09:49:24 ubuntu-vm systemd[1]: avahi-daemon.service: Main process exited, code=exited, status=255/n/a Jun 12 09:49:24 ubuntu-vm systemd[1]: avahi-daemon.service: Failed with result 'exit-code'. Jun 12 09:49:24 ubuntu-vm systemd[1]: Failed to start Avahi mDNS/DNS-SD Stack. Fixes: f396922 ("net: do not allow changing SO_REUSEADDR/SO_REUSEPORT on bound sockets") Cc: Maciej Żenczykowski <[email protected]> Cc: Eric Dumazet <[email protected]> Signed-off-by: Bart Van Assche <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>

Pull KVM updates from Paolo Bonzini: "Small update for KVM: ARM: - lazy context-switching of FPSIMD registers on arm64 - "split" regions for vGIC redistributor s390: - cleanups for nested - clock handling - crypto - storage keys - control register bits x86: - many bugfixes - implement more Hyper-V super powers - implement lapic_timer_advance_ns even when the LAPIC timer is emulated using the processor's VMX preemption timer. - two security-related bugfixes at the top of the branch" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (79 commits) kvm: fix typo in flag name kvm: x86: use correct privilege level for sgdt/sidt/fxsave/fxrstor access KVM: x86: pass kvm_vcpu to kvm_read_guest_virt and kvm_write_guest_virt_system KVM: x86: introduce linear_{read,write}_system kvm: nVMX: Enforce cpl=0 for VMX instructions kvm: nVMX: Add support for "VMWRITE to any supported field" kvm: nVMX: Restrict VMX capability MSR changes KVM: VMX: Optimize tscdeadline timer latency KVM: docs: nVMX: Remove known limitations as they do not exist now KVM: docs: mmu: KVM support exposing SLAT to guests kvm: no need to check return value of debugfs_create functions kvm: Make VM ioctl do valloc for some archs kvm: Change return type to vm_fault_t KVM: docs: mmu: Fix link to NPT presentation from KVM Forum 2008 kvm: x86: Amend the KVM_GET_SUPPORTED_CPUID API documentation KVM: x86: hyperv: declare KVM_CAP_HYPERV_TLBFLUSH capability KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}_EX implementation KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE} implementation KVM: introduce kvm_make_vcpus_request_mask() API KVM: x86: hyperv: do rep check for each hypercall separately ...

Fixes: a2225d9 ("autofs: remove left-over autofs4 stubs") Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

…t/mips/linux Pull MIPS updates from James Hogan: "These are the main MIPS changes for 4.18. Rough overview: - MAINTAINERS: Add Paul Burton as MIPS co-maintainer - Misc: Generic compiler intrinsics, Y2038 improvements, Perf+MT fixes - Platform support: Netgear WNR1000 V3, Microsemi Ocelot integrated switch, Ingenic watchdog cleanups More detailed summary: Maintainers: - Add Paul Burton as MIPS co-maintainer, as I soon won't have access to much MIPS hardware, nor enough time to properly maintain MIPS on my own. Miscellaneous: - Use generic GCC library routines from lib/ - Add notrace to generic ucmpdi2 implementation - Rename compiler intrinsic selects to GENERIC_LIB_* - vmlinuz: Use generic ashldi3 - y2038: Convert update/read_persistent_clock() to *_clock64() - sni: Remove read_persistent_clock() - perf: Fix perf with MT counting other threads - Probe for per-TC perf counters in cpu-probe.c - Use correct VPE ID for VPE tracing Minor cleanups: - Avoid unneeded built-in.a in DTS dirs - sc-debugfs: Re-use kstrtobool_from_user - memset.S: Reinstate delay slot indentation - VPE: Fix spelling "uneeded" -> "Unneeded" Platform support: BCM47xx: - Add support for Netgear WNR1000 V3 - firmware: Support small NVRAM partitions - Use __initdata for LEDs platform data Ingenic: - Watchdog driver & platform code improvements: - Disable clock after stopping counter - Use devm_* functions - Drop module remove function - Move platform reset code to restart handler in driver - JZ4740: Convert watchdog instantiation to DT - JZ4780: Fix watchdog DT node - qi_lb60_defconfig: Enable watchdog driver Microsemi: - Ocelot: Add support for integrated switch - pcb123: Connect phys to ports" * tag 'mips_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits) MAINTAINERS: Add Paul Burton as MIPS co-maintainer MIPS: ptrace: Make FPU context layout comments match reality MIPS: memset.S: Reinstate delay slot indentation MIPS: perf: Fix perf with MT counting other threads MIPS: perf: Use correct VPE ID when setting up VPE tracing MIPS: perf: More robustly probe for the presence of per-tc counters MIPS: Probe for MIPS MT perf counters per TC MIPS: mscc: Connect phys to ports on ocelot_pcb123 MIPS: mscc: Add switch to ocelot MIPS: JZ4740: Drop old platform reset code MIPS: qi_lb60: Enable the jz4740-wdt driver MIPS: JZ4780: dts: Fix watchdog node MIPS: JZ4740: dts: Add bindings for the jz4740-wdt driver watchdog: JZ4740: Drop module remove function watchdog: JZ4740: Register a restart handler watchdog: JZ4740: Use devm_* functions watchdog: JZ4740: Disable clock after stopping counter MIPS: VPE: Fix spelling mistake: "uneeded" -> "unneeded" MIPS: Re-use kstrtobool_from_user() MIPS: Convert update_persistent_clock() to update_persistent_clock64() ...

Pull VFIO updates from Alex Williamson: - Bind type1 task tracking to group_leader to facilitate vCPU hotplug in QEMU (Alex Williamson) - Sample mdev display drivers, including region-based host and guest Linux drivers and bochs compatible dmabuf device (Gerd Hoffmann) - Fix vfio-platform reset module leak (Geert Uytterhoeven) - vfio-platform error message consistency (Geert Uytterhoeven) - Global checking for mdev uuid collisions rather than per parent device (Alex Williamson) - Use match_string() helper (Yisheng Xie) - vfio-platform PM domain fixes (Geert Uytterhoeven) - Fix sample mbochs driver build dependency (Arnd Bergmann) * tag 'vfio-v4.18-rc1' of git://github.com/awilliam/linux-vfio: samples: mbochs: add DMA_SHARED_BUFFER dependency vfio: platform: Fix using devices in PM Domains vfio: use match_string() helper vfio/mdev: Re-order sysfs attribute creation vfio/mdev: Check globally for duplicate devices vfio: platform: Make printed error messages more consistent vfio: platform: Fix reset module leak in error path sample: vfio bochs vbe display (host device for bochs-drm) sample: vfio mdev display - guest driver sample: vfio mdev display - host device vfio/type1: Fix task tracking for QEMU vCPU hotplug

Pull NTB updates from Jon Mason: - reorg and clean-up of the Intel NTB driver - a trivial comment change - change GFP_ATOMIC to GFP_KERNEL where appropriate * tag 'ntb-4.18' of git://github.com/jonmason/ntb: ntb: ntb_transport: Replace GFP_ATOMIC with GFP_KERNEL in ntb_transport_create_queue ntb: ntb_transport: Replace GFP_ATOMIC with GFP_KERNEL in ntb_transport_setup_qp_mw NTB: ntb_hw_idt: fix typo 'can by' to 'can be' ntb: intel: change references of skx to gen3 ntb: intel: split out the gen3 code ntb: intel: header definitions refactor

…rzhang/linux Pull thermal updates from Zhang Rui: "Thermal core and intel thermal drivers: - convert thermal sysfs attributes to use DEVICE_ATTR_{RO|RW|WO}() variants (Viresh Kumar) - update license to SPDX format (Lina Iyer) - add GeminiLake support for int340x processor_thermal driver (Sumeet Pawnikar) - prevent error in reading trip hysteresis attribute for int340x thermal driver (Srinivas Pandruvada)" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: int340x: processor_thermal: Add GeminiLake support drivers: thermal: Update license to SPDX format thermal: int340x: Prevent error in reading trip hysteresis attribute thermal: Use DEVICE_ATTR_{RO|RW|WO}() variants thermal: Shorten name of sysfs callbacks

…/evalenti/linux-soc-thermal Pull thermal SoC updates from Zhang Rui: "Thermal SoC management updates: - imx thermal driver now supports i.MX7 thermal sensor (Anson Huang) - exynos thermal driver dropped support for exynos 5440 (Krzysztof Kozlowski) - rcar_thermal now supports r8a77995 (Yoshihiro Kaneko) - rcar_gen3_thermal now supports r8a77965 (Niklas Söderlund) - qcom-spmi-temp-alarm now supports GEN2 PMIC peripherals (David Collins) - uniphier thermal now supports UniPhier PXs3 (Kunihiko Hayashi) - mediatek thermal now supports MT7622 SoC (Sean Wang) - considerable refactoring of exynos driver (Bartlomiej Zolnierkiewicz) - small fixes all over the place on different drivers" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (50 commits) thermal: qcom: tsens: Allow number of sensors to come from DT thermal: tegra: soctherm: add const to struct thermal_cooling_device_ops thermal: exynos: Reduce severity of too early temperature read thermal: imx: Switch to SPDX identifier thermal: qcom-spmi-temp-alarm: add support for GEN2 PMIC peripherals thermal: ti-soc-thermal: fix incorrect entry in omap5430_adc_to_temp[] thermal: rcar_thermal: add r8a77995 support dt-bindings: thermal: rcar-thermal: add R8A77995 support thermal: mediatek: use of_device_get_match_data() thermal: exynos: remove trip reporting to user-space thermal: exynos: remove unused defines for Exynos5433 thermal: exynos: cleanup code for enabling threshold interrupts thermal: exynos: check return values of ->get_trip_[temp, hyst] methods thermal: exynos: move trips setting to exynos_tmu_initialize() thermal: exynos: set trips in ascending order in exynos7_tmu_initialize() thermal: exynos: do not use trips structure directly in ->tmu_initialize thermal: exynos: add exynos*_tmu_set_[trip,hyst]() helpers thermal: exynos: move IRQs clearing to exynos_tmu_initialize() thermal: exynos: clear IRQs later in exynos4412_tmu_initialize() thermal: exynos: make ->tmu_initialize method void ...

…/kernel/git/helgaas/pci Pull more PCI updates from Bjorn Helgaas: - squash AER directory into drivers/pci/pcie/aer.c (Bjorn Helgaas) - collect all native hardware drivers under drivers/pci/controller/ (Shawn Lin) * tag 'pci-v4.18-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/AER: Use "PCI Express" consistently in Kconfig text PCI/AER: Hoist aerdrv.c, aer_inject.c up to drivers/pci/pcie/ PCI/AER: Squash Kconfig.debug into Kconfig PCI/AER: Move private AER things to aerdrv.c PCI/AER: Move aer_irq() declaration to portdrv.h PCI/AER: Move pcie_aer_get_firmware_first() to portdrv.h PCI/AER: Remove duplicate pcie_port_bus_type declaration PCI/AER: Squash ecrc.c into aerdrv.c PCI/AER: Squash aerdrv_acpi.c into aerdrv.c PCI/AER: Squash aerdrv_errprint.c into aerdrv.c PCI/AER: Squash aerdrv_core.c into aerdrv.c PCI/AER: Reorder code to group probe/remove stuff together PCI/AER: Remove forward declarations PCI: Collect all native drivers under drivers/pci/controller/

Once upon a time nfp_cpp_resource_find() took a name parameter, which could be any user-chosen string. Resources are identified by a CRC32 hash of a 8 byte string, so we had to pad user input with zeros to make sure CRC32 gave the correct result. Since then nfp_cpp_resource_find() was made to operate on allocated resources only (struct nfp_resource). We kzalloc those so there is no need to pad the strings and use memcmp. This avoids a GCC 8 stringop-truncation warning: In function ‘nfp_cpp_resource_find’, inlined from ‘nfp_resource_try_acquire’ at .../nfpcore/nfp_resource.c:153:8, inlined from ‘nfp_resource_acquire’ at .../nfpcore/nfp_resource.c:206:9: .../nfpcore/nfp_resource.c:108:2: warning: strncpy’ output may be truncated copying 8 bytes from a string of length 8 [-Wstringop-truncation] strncpy(name_pad, res->name, sizeof(name_pad)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: David S. Miller <[email protected]>

We are gathering software statistics on per-ring basis. .ndo_get_stats64 handler adds the rings up. Unfortunately we are currently only adding up active rings, which means that if user decreases the number of active rings the statistics from deactivated rings will no longer be counted and total interface statistics may go backwards. Always sum all possible rings, the stats are allocated statically for max number of rings, so we don't have to worry about them being removed. We could add the stats up when user changes the ring count, but it seems unnecessary.. Adding up inactive rings will be very quick since no datapath will be touching them. Fixes: 164d1e9 ("nfp: add support for ethtool .set_channels") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: David S. Miller <[email protected]>

.ndo_get_phys_port_name was recently extended to support multi-vNIC FWs. These are firmwares which can have more than one vNIC per PF without associated port (e.g. Adaptive Buffer Management FW), therefore we need a way of distinguishing the vNICs. Unfortunately, it's too late to make flower use the same naming. Flower users may depend on .ndo_get_phys_port_name returning -EOPNOTSUPP, for example the name udev gave the PF vNIC was just the bare PCI device-based name before the change, and will have 'nn0' appended after. To ensure flower's vNIC doesn't have phys_port_name attribute, add a flag to vNIC struct and set it in flower code. New projects will not set the flag adhere to the naming scheme from the start. Fixes: 51c1df8 ("nfp: assign vNIC id as phys_port_name of vNICs which are not ports") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>

We need to release the refcnt on dst_entry in the route table, otherwise we will leak the route. Fixes: 8e6a904 ("nfp: flower vxlan neighbour offload") Signed-off-by: Pieter Jansen van Vuuren <[email protected]> Signed-off-by: Louis Peens <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>

Jakub Kicinski says: ==================== nfp: fix a warning, stats, naming and route leak Various fixes for the NFP. Patch 1 fixes a harmless GCC 8 warning. Patch 2 ensures statistics are correct after users decrease the number of channels/rings. Patch 3 restores phy_port_name behaviour for flower, ndo_get_phy_port_name used to return -EOPNOTSUPP on one of the netdevs, and we need to keep it that way otherwise interface names may change. Patch 4 fixes refcnt leak in flower tunnel offload code. ==================== Signed-off-by: David S. Miller <[email protected]>

The callback model of handling network failover is not suitable in the current form. 1. It was merged without addressing all the review feedback. 2. It was merged without approval of any of the netvsc maintainers. 3. Design discussion on how to handle PV/VF fallback is still not complete. 4. IMHO the code model using callbacks is trying to make something common which isn't. Revert the netvsc specific changes for now. Does not impact ongoing development of failover model for virtio. Revisit this after a simpler library based failover kernel routines are extracted. This reverts commit 9c6ffba ("hv_netvsc: fix error return code in netvsc_probe()") and commit 1ff7807 ("netvsc: refactor notifier/event handling code to use the failover framework") Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>

When finding the parent netvsc device, the search needs to be across all netvsc device instances (independent of network namespace). Find parent device of VF using upper_dev_get routine which searches only adjacent list. Fixes: e8ff40d ("hv_netvsc: improve VF device matching") Signed-off-by: Stephen Hemminger <[email protected]> netns aware byref Signed-off-by: David S. Miller <[email protected]>

When VF is added, the paravirtual device is already present and may have been moved to another network namespace. For example, sometimes the management interface is put in another net namespace in some environments. The VF should get moved to where the netvsc device is when the VF is discovered. The user can move it later (if desired). Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>

Stephen Hemminger says: ==================== hv_netvsc: notification and namespace fixes This set of patches addresses two set of fixes. First it backs out the common callback model which was merged in net-next without completing all the review feedback or getting maintainer approval. Then it fixes the transparent VF management code to handle network namespaces. ==================== Signed-off-by: David S. Miller <[email protected]>

The GPIO MDIO driver now needs only <linux/gpio/consumer.h> so cut the legacy <linux/gpio.h> and <linux/of_gpio.h> includes that are no longer used. Signed-off-by: Linus Walleij <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>

For each network interface linux network stack issue ndo_set_rx_mode call in order to configure MAC address filters (e.g. for multicast filtering). Currently ThunderX NICVF driver has only one ordered workqueue to process such requests for all VFs. And because of that it is possible that subsequent call to ndo_set_rx_mode would corrupt data which is currently in use by nicvf_set_rx_mode_task. Which in turn could cause following issue: [...] [ 48.978341] Unable to handle kernel paging request at virtual address 1fffff0000000000 [ 48.986275] Mem abort info: [ 48.989058] Exception class = DABT (current EL), IL = 32 bits [ 48.994965] SET = 0, FnV = 0 [ 48.998020] EA = 0, S1PTW = 0 [ 49.001152] Data abort info: [ 49.004022] ISV = 0, ISS = 0x00000004 [ 49.007869] CM = 0, WnR = 0 [ 49.010826] [1fffff0000000000] address between user and kernel address ranges [ 49.017963] Internal error: Oops: 96000004 [#1] SMP [...] [ 49.072138] task: ffff800fdd675400 task.stack: ffff000026440000 [ 49.078051] PC is at prefetch_freepointer.isra.37+0x28/0x3c [ 49.083613] LR is at kmem_cache_alloc_trace+0xc8/0x1fc [...] [ 49.272684] [<ffff0000082738f0>] prefetch_freepointer.isra.37+0x28/0x3c [ 49.279286] [<ffff000008276bc8>] kmem_cache_alloc_trace+0xc8/0x1fc [ 49.285455] [<ffff0000082c0c0c>] alloc_fdtable+0x78/0x134 [ 49.290841] [<ffff0000082c15c0>] dup_fd+0x254/0x2f4 [ 49.295709] [<ffff0000080d1954>] copy_process.isra.38.part.39+0x64c/0x1168 [ 49.302572] [<ffff0000080d264c>] _do_fork+0xfc/0x3b0 [ 49.307524] [<ffff0000080d29e8>] SyS_clone+0x44/0x50 [...] This patch is to prevent such concurrent data write with spinlock. Reported-by: Dean Nelson <[email protected]> Signed-off-by: Vadim Lomovtsev <[email protected]> Signed-off-by: David S. Miller <[email protected]>

fix failures in the 'teardown' stage of test b7b8, probably a leftover of commit 7c5995b ("tc-testing: fixed copy-pasting error in ife tests") Fixes: a56e6bc ("tc-testing: updated ife test cases") Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>

…mac_probe()' If 'of_device_get_match_data()' fails, we need to release some resources as done in the other error handling path of this function. Fixes: efacb56 ("net: stmmac: dwmac-meson: extend phy mode setting") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: David S. Miller <[email protected]>

…nable() [ Upstream commit 898bc40 ] Fix au0828_analog_stream_enable() to check if device is in the right state first. When unbind happens while bind is in progress, usbdev pointer could be invalid in au0828_analog_stream_enable() and a call to usb_ifnum_to_if() will result in the null pointer dereference. This problem is found with the new media_dev_allocator.sh test. kernel: [ 590.359623] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e8 kernel: [ 590.359627] #PF error: [normal kernel read fault] kernel: [ 590.359629] PGD 0 P4D 0 kernel: [ 590.359632] Oops: 0000 [#1] SMP PTI kernel: [ 590.359634] CPU: 3 PID: 1458 Comm: v4l_id Not tainted 5.1.0-rc2+ #30 kernel: [ 590.359636] Hardware name: Dell Inc. OptiPlex 7 90/0HY9JP, BIOS A18 09/24/2013 kernel: [ 590.359641] RIP: 0010:usb_ifnum_to_if+0x6/0x60 kernel: [ 590.359643] Code: 5d 41 5e 41 5f 5d c3 48 83 c4 10 b8 fa ff ff ff 5b 41 5c 41 5d 41 5e 41 5f 5d c3 b8 fa ff ff ff c3 0f 1f 00 6 6 66 66 66 90 55 <48> 8b 97 e8 04 00 00 48 89 e5 48 85 d2 74 41 0f b6 4a 04 84 c 9 74 kernel: [ 590.359645] RSP: 0018:ffffad3cc3c1fc00 EFLAGS: 00010246 kernel: [ 590.359646] RAX: 0000000000000000 RBX: ffff8ded b1f3c000 RCX: 1f377e4500000000 kernel: [ 590.359648] RDX: ffff8dedfa3a6b50 RSI: 00000000 00000000 RDI: 0000000000000000 kernel: [ 590.359649] RBP: ffffad3cc3c1fc28 R08: 00000000 8574acc2 R09: ffff8dedfa3a6b50 kernel: [ 590.359650] R10: 0000000000000001 R11: 00000000 00000000 R12: 0000000000000000 kernel: [ 590.359652] R13: ffff8dedb1f3f0f0 R14: ffffffff adcf7ec0 R15: 0000000000000000 kernel: [ 590.359654] FS: 00007f7917198540(0000) GS:ffff 8dee258c0000(0000) knlGS:0000000000000000 kernel: [ 590.359655] CS: 0010 DS: 0000 ES: 0000 CR0: 00 00000080050033 kernel: [ 590.359657] CR2: 00000000000004e8 CR3: 00000001 a388e002 CR4: 00000000000606e0 kernel: [ 590.359658] Call Trace: kernel: [ 590.359664] ? au0828_analog_stream_enable+0x2c/0x180 kernel: [ 590.359666] au0828_v4l2_open+0xa4/0x110 kernel: [ 590.359670] v4l2_open+0x8b/0x120 kernel: [ 590.359674] chrdev_open+0xa6/0x1c0 kernel: [ 590.359676] ? cdev_put.part.3+0x20/0x20 kernel: [ 590.359678] do_dentry_open+0x1f6/0x360 kernel: [ 590.359681] vfs_open+0x2f/0x40 kernel: [ 590.359684] path_openat+0x299/0xc20 kernel: [ 590.359688] do_filp_open+0x9b/0x110 kernel: [ 590.359695] ? _raw_spin_unlock+0x27/0x40 kernel: [ 590.359697] ? __alloc_fd+0xb2/0x160 kernel: [ 590.359700] do_sys_open+0x1ba/0x260 kernel: [ 590.359702] ? do_sys_open+0x1ba/0x260 kernel: [ 590.359712] __x64_sys_openat+0x20/0x30 kernel: [ 590.359715] do_syscall_64+0x5a/0x120 kernel: [ 590.359718] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 719c7d5 ] BUG: KASAN: use-after-free in ip_vs_in.part.29+0xe8/0xd20 [ip_vs] Read of size 4 at addr ffff8881e9b26e2c by task sshd/5603 CPU: 0 PID: 5603 Comm: sshd Not tainted 4.19.39+ #30 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x270 kasan_report+0x179/0x2c0 ip_vs_in.part.29+0xe8/0xd20 [ip_vs] ip_vs_in+0xd8/0x170 [ip_vs] nf_hook_slow+0x5f/0xe0 __ip_local_out+0x1d5/0x250 ip_local_out+0x19/0x60 __tcp_transmit_skb+0xba1/0x14f0 tcp_write_xmit+0x41f/0x1ed0 ? _copy_from_iter_full+0xca/0x340 __tcp_push_pending_frames+0x52/0x140 tcp_sendmsg_locked+0x787/0x1600 ? tcp_sendpage+0x60/0x60 ? inet_sk_set_state+0xb0/0xb0 tcp_sendmsg+0x27/0x40 sock_sendmsg+0x6d/0x80 sock_write_iter+0x121/0x1c0 ? sock_sendmsg+0x80/0x80 __vfs_write+0x23e/0x370 vfs_write+0xe7/0x230 ksys_write+0xa1/0x120 ? __ia32_sys_read+0x50/0x50 ? __audit_syscall_exit+0x3ce/0x450 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7ff6f6147c60 Code: 73 01 c3 48 8b 0d 28 12 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 5d 73 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 RSP: 002b:00007ffd772ead18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000034 RCX: 00007ff6f6147c60 RDX: 0000000000000034 RSI: 000055df30a31270 RDI: 0000000000000003 RBP: 000055df30a31270 R08: 0000000000000000 R09: 0000000000000000 R10: 00007ffd772ead70 R11: 0000000000000246 R12: 00007ffd772ead74 R13: 00007ffd772eae20 R14: 00007ffd772eae24 R15: 000055df2f12ddc0 Allocated by task 6052: kasan_kmalloc+0xa0/0xd0 __kmalloc+0x10a/0x220 ops_init+0x97/0x190 register_pernet_operations+0x1ac/0x360 register_pernet_subsys+0x24/0x40 0xffffffffc0ea016d do_one_initcall+0x8b/0x253 do_init_module+0xe3/0x335 load_module+0x2fc0/0x3890 __do_sys_finit_module+0x192/0x1c0 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 6067: __kasan_slab_free+0x130/0x180 kfree+0x90/0x1a0 ops_free_list.part.7+0xa6/0xc0 unregister_pernet_operations+0x18b/0x1f0 unregister_pernet_subsys+0x1d/0x30 ip_vs_cleanup+0x1d/0xd2f [ip_vs] __x64_sys_delete_module+0x20c/0x300 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8881e9b26600 which belongs to the cache kmalloc-4096 of size 4096 The buggy address is located 2092 bytes inside of 4096-byte region [ffff8881e9b26600, ffff8881e9b27600) The buggy address belongs to the page: page:ffffea0007a6c800 count:1 mapcount:0 mapping:ffff888107c0e600 index:0x0 compound_mapcount: 0 flags: 0x17ffffc0008100(slab|head) raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff888107c0e600 raw: 0000000000000000 0000000080070007 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected while unregistering ipvs module, ops_free_list calls __ip_vs_cleanup, then nf_unregister_net_hooks be called to do remove nf hook entries. It need a RCU period to finish, however net->ipvs is set to NULL immediately, which will trigger NULL pointer dereference when a packet is hooked and handled by ip_vs_in where net->ipvs is dereferenced. Another scene is ops_free_list call ops_free to free the net_generic directly while __ip_vs_cleanup finished, then calling ip_vs_in will triggers use-after-free. This patch moves nf_unregister_net_hooks from __ip_vs_cleanup() to __ip_vs_dev_cleanup(), where rcu_barrier() is called by unregister_pernet_device -> unregister_pernet_operations, that will do the needed grace period. Reported-by: Hulk Robot <[email protected]> Fixes: efe4160 ("ipvs: convert to use pernet nf_hook api") Suggested-by: Julian Anastasov <[email protected]> Signed-off-by: YueHaibing <[email protected]> Acked-by: Julian Anastasov <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

In nsim_fib_init(), if register_fib_notifier failed, nsim_fib_net_ops should be unregistered before return. In nsim_fib_exit(), unregister_fib_notifier should be called before nsim_fib_net_ops be unregistered, otherwise may cause use-after-free: BUG: KASAN: use-after-free in nsim_fib_event_nb+0x342/0x570 [netdevsim] Read of size 8 at addr ffff8881daaf4388 by task kworker/0:3/3499 CPU: 0 PID: 3499 Comm: kworker/0:3 Not tainted 5.3.0-rc7+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work [ipv6] Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xa9/0x10e lib/dump_stack.c:113 print_address_description+0x65/0x380 mm/kasan/report.c:351 __kasan_report+0x149/0x18d mm/kasan/report.c:482 kasan_report+0xe/0x20 mm/kasan/common.c:618 nsim_fib_event_nb+0x342/0x570 [netdevsim] notifier_call_chain+0x52/0xf0 kernel/notifier.c:95 __atomic_notifier_call_chain+0x78/0x140 kernel/notifier.c:185 call_fib_notifiers+0x30/0x60 net/core/fib_notifier.c:30 call_fib6_entry_notifiers+0xc1/0x100 [ipv6] fib6_add+0x92e/0x1b10 [ipv6] __ip6_ins_rt+0x40/0x60 [ipv6] ip6_ins_rt+0x84/0xb0 [ipv6] __ipv6_ifa_notify+0x4b6/0x550 [ipv6] ipv6_ifa_notify+0xa5/0x180 [ipv6] addrconf_dad_completed+0xca/0x640 [ipv6] addrconf_dad_work+0x296/0x960 [ipv6] process_one_work+0x5c0/0xc00 kernel/workqueue.c:2269 worker_thread+0x5c/0x670 kernel/workqueue.c:2415 kthread+0x1d7/0x200 kernel/kthread.c:255 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Allocated by task 3388: save_stack+0x19/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:493 kmalloc include/linux/slab.h:557 [inline] kzalloc include/linux/slab.h:748 [inline] ops_init+0xa9/0x220 net/core/net_namespace.c:127 __register_pernet_operations net/core/net_namespace.c:1135 [inline] register_pernet_operations+0x1d4/0x420 net/core/net_namespace.c:1212 register_pernet_subsys+0x24/0x40 net/core/net_namespace.c:1253 nsim_fib_init+0x12/0x70 [netdevsim] veth_get_link_ksettings+0x2b/0x50 [veth] do_one_initcall+0xd4/0x454 init/main.c:939 do_init_module+0xe0/0x330 kernel/module.c:3490 load_module+0x3c2f/0x4620 kernel/module.c:3841 __do_sys_finit_module+0x163/0x190 kernel/module.c:3931 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3534: save_stack+0x19/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1474 [inline] slab_free mm/slub.c:3016 [inline] kfree+0xe9/0x2d0 mm/slub.c:3957 ops_free net/core/net_namespace.c:151 [inline] ops_free_list.part.7+0x156/0x220 net/core/net_namespace.c:184 ops_free_list net/core/net_namespace.c:182 [inline] __unregister_pernet_operations net/core/net_namespace.c:1165 [inline] unregister_pernet_operations+0x221/0x2a0 net/core/net_namespace.c:1224 unregister_pernet_subsys+0x1d/0x30 net/core/net_namespace.c:1271 nsim_fib_exit+0x11/0x20 [netdevsim] nsim_module_exit+0x16/0x21 [netdevsim] __do_sys_delete_module kernel/module.c:1015 [inline] __se_sys_delete_module kernel/module.c:958 [inline] __x64_sys_delete_module+0x244/0x330 kernel/module.c:958 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: Hulk Robot <[email protected]> Fixes: 59c84b9 ("netdevsim: Restore per-network namespace accounting for fib entries") Signed-off-by: YueHaibing <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>

[ Upstream commit 5d1116d ] Christoph Hellwig complained about the following soft lockup warning when running scrub after generic/175 when preemption is disabled and slub debugging is enabled: watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [xfs_scrub:161] Modules linked in: irq event stamp: 41692326 hardirqs last enabled at (41692325): [<ffffffff8232c3b7>] _raw_0 hardirqs last disabled at (41692326): [<ffffffff81001c5a>] trace0 softirqs last enabled at (41684994): [<ffffffff8260031f>] __do_e softirqs last disabled at (41684987): [<ffffffff81127d8c>] irq_e0 CPU: 3 PID: 16189 Comm: xfs_scrub Not tainted 5.4.0-rc3+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.124 RIP: 0010:_raw_spin_unlock_irqrestore+0x39/0x40 Code: 89 f3 be 01 00 00 00 e8 d5 3a e5 fe 48 89 ef e8 ed 87 e5 f2 RSP: 0018:ffffc9000233f970 EFLAGS: 00000286 ORIG_RAX: ffffffffff3 RAX: ffff88813b398040 RBX: 0000000000000286 RCX: 0000000000000006 RDX: 0000000000000006 RSI: ffff88813b3988c0 RDI: ffff88813b398040 RBP: ffff888137958640 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffea00042b0c00 R13: 0000000000000001 R14: ffff88810ac32308 R15: ffff8881376fc040 FS: 00007f6113dea700(0000) GS:ffff88813bb80000(0000) knlGS:00000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6113de8ff8 CR3: 000000012f290000 CR4: 00000000000006e0 Call Trace: free_debug_processing+0x1dd/0x240 __slab_free+0x231/0x410 kmem_cache_free+0x30e/0x360 xchk_ag_btcur_free+0x76/0xb0 xchk_ag_free+0x10/0x80 xchk_bmap_iextent_xref.isra.14+0xd9/0x120 xchk_bmap_iextent+0x187/0x210 xchk_bmap+0x2e0/0x3b0 xfs_scrub_metadata+0x2e7/0x500 xfs_ioc_scrub_metadata+0x4a/0xa0 xfs_file_ioctl+0x58a/0xcd0 do_vfs_ioctl+0xa0/0x6f0 ksys_ioctl+0x5b/0x90 __x64_sys_ioctl+0x11/0x20 do_syscall_64+0x4b/0x1a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe If preemption is disabled, all metadata buffers needed to perform the scrub are already in memory, and there are a lot of records to check, it's possible that the scrub thread will run for an extended period of time without sleeping for IO or any other reason. Then the watchdog timer or the RCU stall timeout can trigger, producing the backtrace above. To fix this problem, call cond_resched() from the scrub thread so that we back out to the scheduler whenever necessary. Reported-by: Christoph Hellwig <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

When working with very large nodes, poisoning the struct pages (for which there will be very many) can take a very long time. If the system is using voluntary preemptions, the software watchdog will not be able to detect forward progress. This patch addresses this issue by offering to give up time like __remove_pages() does. This behavior was introduced in v5.6 with: commit d33695b ("mm/memory_hotplug: poison memmap in remove_pfn_range_from_zone()") Alternately, init_page_poison could do this cond_resched(), but it seems to me that the caller of init_page_poison() is what actually knows whether or not it should relax its own priority. Based on Dan's notes, I think this is perfectly safe: commit f931ab4 ("mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}") Aside from fixing the lockup, it is also a friendlier thing to do on lower core systems that might wipe out large chunks of hotplug memory (probably not a very common case). Fixes this kind of splat: watchdog: BUG: soft lockup - CPU#46 stuck for 22s! [daxctl:9922] irq event stamp: 138450 hardirqs last enabled at (138449): [<ffffffffa1001f26>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (138450): [<ffffffffa1001f42>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (138448): [<ffffffffa1e00347>] __do_softirq+0x347/0x456 softirqs last disabled at (138443): [<ffffffffa10c416d>] irq_exit+0x7d/0xb0 CPU: 46 PID: 9922 Comm: daxctl Not tainted 5.7.0-BEN-14238-g373c6049b336 #30 Hardware name: Intel Corporation PURLEY/PURLEY, BIOS PLYXCRB1.86B.0578.D07.1902280810 02/28/2019 RIP: 0010:memset_erms+0x9/0x10 Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01 Call Trace: remove_pfn_range_from_zone+0x3a/0x380 memunmap_pages+0x17f/0x280 release_nodes+0x22a/0x260 __device_release_driver+0x172/0x220 device_driver_detach+0x3e/0xa0 unbind_store+0x113/0x130 kernfs_fop_write+0xdc/0x1c0 vfs_write+0xde/0x1d0 ksys_write+0x58/0xd0 do_syscall_64+0x5a/0x120 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Built 2 zonelists, mobility grouping on. Total pages: 49050381 Policy zone: Normal Built 3 zonelists, mobility grouping on. Total pages: 49312525 Policy zone: Normal David said: "It really only is an issue for devmem. Ordinary hotplugged system memory is not affected (onlined/offlined in memory block granularity)." Link: http://lkml.kernel.org/r/[email protected] Fixes: commit d33695b ("mm/memory_hotplug: poison memmap in remove_pfn_range_from_zone()") Signed-off-by: Ben Widawsky <[email protected]> Reported-by: "Scargall, Steve" <[email protected]> Reported-by: Ben Widawsky <[email protected]> Acked-by: David Hildenbrand <[email protected]> Cc: Dan Williams <[email protected]> Cc: Vishal Verma <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

fib_trie_unmerge() is called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB alias list in a leaf is traversed with hlist_for_each_entry_rcu(). Since the function is always called with RTNL held and since modification of the list is protected by RTNL, simply use hlist_for_each_entry() and silence the warning. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted ----------------------------- net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/164: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d fib_trie_unmerge+0x608/0xdb0 fib_unmerge+0x44/0x360 fib4_rule_configure+0xc8/0xad0 fib_nl_newrule+0x37a/0x1dd0 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc80a234e97 Code: Bad RIP value. RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97 RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003 RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000 R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020 Fixes: 0ddcf43 ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>

[ Upstream commit 83f3522 ] fib_trie_unmerge() is called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB alias list in a leaf is traversed with hlist_for_each_entry_rcu(). Since the function is always called with RTNL held and since modification of the list is protected by RTNL, simply use hlist_for_each_entry() and silence the warning. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted ----------------------------- net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/164: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d fib_trie_unmerge+0x608/0xdb0 fib_unmerge+0x44/0x360 fib4_rule_configure+0xc8/0xad0 fib_nl_newrule+0x37a/0x1dd0 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc80a234e97 Code: Bad RIP value. RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97 RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003 RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000 R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020 Fixes: 0ddcf43 ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 #32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 #33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 #32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 #33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== #45: core_reloc: insn #160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 #46: core_reloc: insn #167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #47: core_reloc: insn #174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #48: core_reloc: insn #178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #49: core_reloc: insn #182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== #30: core_reloc: insn #132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #31: core_reloc: insn #134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Lorenz Bauer <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>

During boot time kernel configured with OF=y but USE_OF=n displays the following warnings and hangs shortly after starting userspace: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:695 irq_create_mapping_affinity+0x29/0xc0 irq_create_mapping_affinity(, 6) called with NULL domain CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 irq_create_mapping_affinity+0x29/0xc0 local_timer_setup+0x40/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35b ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/xtensa/kernel/time.c:141 local_timer_setup+0x58/0x88 error: can't map timer irq CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 local_timer_setup+0x58/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35c ]--- Failed to request irq 0 (timer) Fix that by calling irqchip_init only when CONFIG_USE_OF is selected and calling legacy interrupt controller init otherwise. Fixes: da844a8 ("xtensa: add device trees support") Signed-off-by: Max Filippov <[email protected]>

[ Upstream commit 6489f8d ] During boot time kernel configured with OF=y but USE_OF=n displays the following warnings and hangs shortly after starting userspace: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:695 irq_create_mapping_affinity+0x29/0xc0 irq_create_mapping_affinity(, 6) called with NULL domain CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 irq_create_mapping_affinity+0x29/0xc0 local_timer_setup+0x40/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35b ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/xtensa/kernel/time.c:141 local_timer_setup+0x58/0x88 error: can't map timer irq CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.15.0-rc3-00001-gd67ed2510d28 #30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 local_timer_setup+0x58/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35c ]--- Failed to request irq 0 (timer) Fix that by calling irqchip_init only when CONFIG_USE_OF is selected and calling legacy interrupt controller init otherwise. Fixes: da844a8 ("xtensa: add device trees support") Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

To pick the changes in this cset: 980fe2f ("x86/fpu: Extend fpu_xstate_prctl() with guest permissions") This picks these new prctls: $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/before $ cp arch/x86/include/uapi/asm/prctl.h tools/arch/x86/include/uapi/asm/prctl.h $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/after $ diff -u /tmp/before /tmp/after --- /tmp/before 2022-01-19 14:40:05.049394977 -0300 +++ /tmp/after 2022-01-19 14:40:35.628154565 -0300 @@ -9,6 +9,8 @@ [0x1021 - 0x1001]= "GET_XCOMP_SUPP", [0x1022 - 0x1001]= "GET_XCOMP_PERM", [0x1023 - 0x1001]= "REQ_XCOMP_PERM", + [0x1024 - 0x1001]= "GET_XCOMP_GUEST_PERM", + [0x1025 - 0x1001]= "REQ_XCOMP_GUEST_PERM", }; #define x86_arch_prctl_codes_2_offset 0x2001 $ With this 'perf trace' can translate those numbers into strings and use the strings in filter expressions: # perf trace -e prctl 0.000 ( 0.011 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9c014b7df5) = 0 0.032 ( 0.002 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9bb6b51580) = 0 5.452 ( 0.003 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfeb70) = 0 5.468 ( 0.002 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfea70) = 0 24.494 ( 0.009 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f562a32ae28) = 0 24.540 ( 0.002 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f563c6d4b30) = 0 670.281 ( 0.008 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30805c8) = 0 670.293 ( 0.002 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30800f0) = 0 ^C# This addresses these perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/prctl.h' differs from latest version at 'arch/x86/include/uapi/asm/prctl.h' diff -u tools/arch/x86/include/uapi/asm/prctl.h arch/x86/include/uapi/asm/prctl.h Cc: Paolo Bonzini <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

WARNING: Unknown commit id '63a0895d960a', maybe rebased or not pulled? #4: The uninitialized_var() macro was removed recently via commit 63a0895 WARNING: 'assigments' may be misspelled - perhaps 'assignments'? #30: FILE: scripts/checkpatch.pl:3904: +# check for self assigments used to avoid compiler warnings total: 0 errors, 2 warnings, 17 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/checkpatch-warn-on-self-assignments.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

…vmsg_parser() [ Upstream commit d900f3d ] When the buffer length of the recvmsg system call is 0, we got the flollowing soft lockup problem: watchdog: BUG: soft lockup - CPU#3 stuck for 27s! [a.out:6149] CPU: 3 PID: 6149 Comm: a.out Kdump: loaded Not tainted 6.2.0+ #30 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:remove_wait_queue+0xb/0xc0 Code: 5e 41 5f c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 57 <41> 56 41 55 41 54 55 48 89 fd 53 48 89 f3 4c 8d 6b 18 4c 8d 73 20 RSP: 0018:ffff88811b5978b8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff88811a7d3780 RCX: ffffffffb7a4d768 RDX: dffffc0000000000 RSI: ffff88811b597908 RDI: ffff888115408040 RBP: 1ffff110236b2f1b R08: 0000000000000000 R09: ffff88811a7d37e7 R10: ffffed10234fa6fc R11: 0000000000000001 R12: ffff88811179b800 R13: 0000000000000001 R14: ffff88811a7d38a8 R15: ffff88811a7d37e0 FS: 00007f6fb5398740(0000) GS:ffff888237180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000010b6ba002 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_msg_wait_data+0x279/0x2f0 tcp_bpf_recvmsg_parser+0x3c6/0x490 inet_recvmsg+0x280/0x290 sock_recvmsg+0xfc/0x120 ____sys_recvmsg+0x160/0x3d0 ___sys_recvmsg+0xf0/0x180 __sys_recvmsg+0xea/0x1a0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc The logic in tcp_bpf_recvmsg_parser is as follows: msg_bytes_ready: copied = sk_msg_recvmsg(sk, psock, msg, len, flags); if (!copied) { wait data; goto msg_bytes_ready; } In this case, "copied" always is 0, the infinite loop occurs. According to the Linux system call man page, 0 should be returned in this case. Therefore, in tcp_bpf_recvmsg_parser(), if the length is 0, directly return. Also modify several other functions with the same problem. Fixes: 1f5be6b ("udp: Implement udp_bpf_recvmsg() for sockmap") Fixes: 9825d86 ("af_unix: Implement unix_dgram_bpf_recvmsg()") Fixes: c5d2177 ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self") Fixes: 604326b ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Liu Jian <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: John Fastabend <[email protected]> Cc: Jakub Sitnicki <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>

…vmsg_parser() When the buffer length of the recvmsg system call is 0, we got the flollowing soft lockup problem: watchdog: BUG: soft lockup - CPU#3 stuck for 27s! [a.out:6149] CPU: 3 PID: 6149 Comm: a.out Kdump: loaded Not tainted 6.2.0+ #30 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:remove_wait_queue+0xb/0xc0 Code: 5e 41 5f c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 57 <41> 56 41 55 41 54 55 48 89 fd 53 48 89 f3 4c 8d 6b 18 4c 8d 73 20 RSP: 0018:ffff88811b5978b8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff88811a7d3780 RCX: ffffffffb7a4d768 RDX: dffffc0000000000 RSI: ffff88811b597908 RDI: ffff888115408040 RBP: 1ffff110236b2f1b R08: 0000000000000000 R09: ffff88811a7d37e7 R10: ffffed10234fa6fc R11: 0000000000000001 R12: ffff88811179b800 R13: 0000000000000001 R14: ffff88811a7d38a8 R15: ffff88811a7d37e0 FS: 00007f6fb5398740(0000) GS:ffff888237180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000010b6ba002 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_msg_wait_data+0x279/0x2f0 tcp_bpf_recvmsg_parser+0x3c6/0x490 inet_recvmsg+0x280/0x290 sock_recvmsg+0xfc/0x120 ____sys_recvmsg+0x160/0x3d0 ___sys_recvmsg+0xf0/0x180 __sys_recvmsg+0xea/0x1a0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc The logic in tcp_bpf_recvmsg_parser is as follows: msg_bytes_ready: copied = sk_msg_recvmsg(sk, psock, msg, len, flags); if (!copied) { wait data; goto msg_bytes_ready; } In this case, "copied" always is 0, the infinite loop occurs. According to the Linux system call man page, 0 should be returned in this case. Therefore, in tcp_bpf_recvmsg_parser(), if the length is 0, directly return. Also modify several other functions with the same problem. Fixes: 1f5be6b ("udp: Implement udp_bpf_recvmsg() for sockmap") Fixes: 9825d86 ("af_unix: Implement unix_dgram_bpf_recvmsg()") Fixes: c5d2177 ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self") Fixes: 604326b ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Liu Jian <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: John Fastabend <[email protected]> Cc: Jakub Sitnicki <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]

To pick the changes in this cset: a03c376 ("x86/arch_prctl: Add AMX feature numbers as ABI constants") 23e5d9e ("x86/mm/iommu/sva: Make LAM and SVA mutually exclusive") 2f8794b ("x86/mm: Provide arch_prctl() interface for LAM") This picks these new prctls in a third range, that was also added to the tools/perf/trace/beauty/arch_prctl.c beautifier. $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/before $ cp arch/x86/include/uapi/asm/prctl.h tools/arch/x86/include/uapi/asm/prctl.h $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/after $ diff -u /tmp/before /tmp/after @@ -20,3 +20,11 @@ [0x2003 - 0x2001]= "MAP_VDSO_64", }; +#define x86_arch_prctl_codes_3_offset 0x4001 +static const char *x86_arch_prctl_codes_3[] = { + [0x4001 - 0x4001]= "GET_UNTAG_MASK", + [0x4002 - 0x4001]= "ENABLE_TAGGED_ADDR", + [0x4003 - 0x4001]= "GET_MAX_TAG_BITS", + [0x4004 - 0x4001]= "FORCE_TAGGED_SVA", +}; + $ With this 'perf trace' can translate those numbers into strings and use the strings in filter expressions: # perf trace -e prctl 0.000 ( 0.011 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9c014b7df5) = 0 0.032 ( 0.002 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9bb6b51580) = 0 5.452 ( 0.003 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfeb70) = 0 5.468 ( 0.002 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfea70) = 0 24.494 ( 0.009 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f562a32ae28) = 0 24.540 ( 0.002 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f563c6d4b30) = 0 670.281 ( 0.008 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30805c8) = 0 670.293 ( 0.002 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30800f0) = 0 ^C# This addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/prctl.h' differs from latest version at 'arch/x86/include/uapi/asm/prctl.h' diff -u tools/arch/x86/include/uapi/asm/prctl.h arch/x86/include/uapi/asm/prctl.h Cc: Adrian Hunter <[email protected]> Cc: Chang S. Bae <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

[ Upstream commit fad87db ] The PAPR spec spells the function name as "ibm,reset-pe-dma-windows" but in practice firmware uses the singular form: "ibm,reset-pe-dma-window" in the device tree. Since we have the wrong spelling in the RTAS function table, reverse lookups (token -> name) fail and warn: unexpected failed lookup for token 86 WARNING: CPU: 1 PID: 545 at arch/powerpc/kernel/rtas.c:659 __do_enter_rtas_trace+0x2a4/0x2b4 CPU: 1 PID: 545 Comm: systemd-udevd Not tainted 6.8.0-rc4 #30 Hardware name: IBM,9105-22A POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NL1060_028) hv:phyp pSeries NIP [c0000000000417f0] __do_enter_rtas_trace+0x2a4/0x2b4 LR [c0000000000417ec] __do_enter_rtas_trace+0x2a0/0x2b4 Call Trace: __do_enter_rtas_trace+0x2a0/0x2b4 (unreliable) rtas_call+0x1f8/0x3e0 enable_ddw.constprop.0+0x4d0/0xc84 dma_iommu_dma_supported+0xe8/0x24c dma_set_mask+0x5c/0xd8 mlx5_pci_init.constprop.0+0xf0/0x46c [mlx5_core] probe_one+0xfc/0x32c [mlx5_core] local_pci_probe+0x68/0x12c pci_call_probe+0x68/0x1ec pci_device_probe+0xbc/0x1a8 really_probe+0x104/0x570 __driver_probe_device+0xb8/0x224 driver_probe_device+0x54/0x130 __driver_attach+0x158/0x2b0 bus_for_each_dev+0xa8/0x120 driver_attach+0x34/0x48 bus_add_driver+0x174/0x304 driver_register+0x8c/0x1c4 __pci_register_driver+0x68/0x7c mlx5_init+0xb8/0x118 [mlx5_core] do_one_initcall+0x60/0x388 do_init_module+0x7c/0x2a4 init_module_from_file+0xb4/0x108 idempotent_init_module+0x184/0x34c sys_finit_module+0x90/0x114 And oopses are possible when lockdep is enabled or the RTAS tracepoints are active, since those paths dereference the result of the lookup. Use the correct spelling to match firmware's behavior, adjusting the related constants to match. Signed-off-by: Nathan Lynch <[email protected]> Fixes: 8252b88 ("powerpc/rtas: improve function information lookups") Reported-by: Gaurav Batra <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/20240222-rtas-fix-ibm-reset-pe-dma-window-v1-1-7aaf235ac63c@linux.ibm.com Signed-off-by: Sasha Levin <[email protected]>

Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 ? srso_return_thunk+0x5/0x5f nvkm_subdev_oneinit_+0x4f/0x120 [nouveau] nvkm_subdev_init_+0x39/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f nvkm_subdev_init+0x44/0x90 [nouveau] nvkm_device_init+0x166/0x2e0 [nouveau] nvkm_udevice_init+0x47/0x70 [nouveau] nvkm_object_init+0x41/0x1c0 [nouveau] nvkm_ioctl_new+0x16a/0x290 [nouveau] ? __pfx_nvkm_client_child_new+0x10/0x10 [nouveau] ? __pfx_nvkm_udevice_new+0x10/0x10 [nouveau] nvkm_ioctl+0x126/0x290 [nouveau] nvif_object_ctor+0x112/0x190 [nouveau] nvif_device_ctor+0x23/0x60 [nouveau] nouveau_cli_init+0x164/0x640 [nouveau] nouveau_drm_device_init+0x97/0x9e0 [nouveau] ? srso_return_thunk+0x5/0x5f ? pci_update_current_state+0x72/0xb0 ? srso_return_thunk+0x5/0x5f nouveau_drm_probe+0x12c/0x280 [nouveau] ? srso_return_thunk+0x5/0x5f local_pci_probe+0x45/0xa0 pci_device_probe+0xc7/0x270 really_probe+0xe6/0x3a0 __driver_probe_device+0x87/0x160 driver_probe_device+0x1f/0xc0 __driver_attach+0xec/0x1f0 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x88/0xd0 bus_add_driver+0x116/0x220 driver_register+0x59/0x100 ? __pfx_nouveau_drm_init+0x10/0x10 [nouveau] do_one_initcall+0x5b/0x320 do_init_module+0x60/0x250 init_module_from_file+0x86/0xc0 idempotent_init_module+0x120/0x2b0 __x64_sys_finit_module+0x5e/0xb0 do_syscall_64+0x83/0x160 ? srso_return_thunk+0x5/0x5f entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7feeb5cc20cd Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b cd 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffcf220b2c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055fdd2916aa0 RCX: 00007feeb5cc20cd RDX: 0000000000000000 RSI: 000055fdd29161e0 RDI: 0000000000000035 RBP: 00007ffcf220b380 R08: 00007feeb5d8fb20 R09: 00007ffcf220b310 R10: 000055fdd2909dc0 R11: 0000000000000246 R12: 000055fdd29161e0 R13: 0000000000020000 R14: 000055fdd29203e0 R15: 000055fdd2909d80 </TASK> We hit this when trying to initialize firmware of type NVKM_FIRMWARE_IMG_DMA because we allocate our memory with dma_alloc_coherent, and DMA allocations can't be turned back into memory pages - which a scatterlist needs in order to map them. So, fix this by allocating the memory with vmalloc instead(). V2: * Fixup explanation as the prior one was bogus Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Dave Airlie <[email protected]> Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

commit 52a6947 upstream. Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 ? srso_return_thunk+0x5/0x5f nvkm_subdev_oneinit_+0x4f/0x120 [nouveau] nvkm_subdev_init_+0x39/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f nvkm_subdev_init+0x44/0x90 [nouveau] nvkm_device_init+0x166/0x2e0 [nouveau] nvkm_udevice_init+0x47/0x70 [nouveau] nvkm_object_init+0x41/0x1c0 [nouveau] nvkm_ioctl_new+0x16a/0x290 [nouveau] ? __pfx_nvkm_client_child_new+0x10/0x10 [nouveau] ? __pfx_nvkm_udevice_new+0x10/0x10 [nouveau] nvkm_ioctl+0x126/0x290 [nouveau] nvif_object_ctor+0x112/0x190 [nouveau] nvif_device_ctor+0x23/0x60 [nouveau] nouveau_cli_init+0x164/0x640 [nouveau] nouveau_drm_device_init+0x97/0x9e0 [nouveau] ? srso_return_thunk+0x5/0x5f ? pci_update_current_state+0x72/0xb0 ? srso_return_thunk+0x5/0x5f nouveau_drm_probe+0x12c/0x280 [nouveau] ? srso_return_thunk+0x5/0x5f local_pci_probe+0x45/0xa0 pci_device_probe+0xc7/0x270 really_probe+0xe6/0x3a0 __driver_probe_device+0x87/0x160 driver_probe_device+0x1f/0xc0 __driver_attach+0xec/0x1f0 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x88/0xd0 bus_add_driver+0x116/0x220 driver_register+0x59/0x100 ? __pfx_nouveau_drm_init+0x10/0x10 [nouveau] do_one_initcall+0x5b/0x320 do_init_module+0x60/0x250 init_module_from_file+0x86/0xc0 idempotent_init_module+0x120/0x2b0 __x64_sys_finit_module+0x5e/0xb0 do_syscall_64+0x83/0x160 ? srso_return_thunk+0x5/0x5f entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7feeb5cc20cd Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b cd 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffcf220b2c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055fdd2916aa0 RCX: 00007feeb5cc20cd RDX: 0000000000000000 RSI: 000055fdd29161e0 RDI: 0000000000000035 RBP: 00007ffcf220b380 R08: 00007feeb5d8fb20 R09: 00007ffcf220b310 R10: 000055fdd2909dc0 R11: 0000000000000246 R12: 000055fdd29161e0 R13: 0000000000020000 R14: 000055fdd29203e0 R15: 000055fdd2909d80 </TASK> We hit this when trying to initialize firmware of type NVKM_FIRMWARE_IMG_DMA because we allocate our memory with dma_alloc_coherent, and DMA allocations can't be turned back into memory pages - which a scatterlist needs in order to map them. So, fix this by allocating the memory with vmalloc instead(). V2: * Fixup explanation as the prior one was bogus Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Dave Airlie <[email protected]> Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup, when the iommu is enabled: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 Fix this by using the non-coherent allocator instead, I think there might be a better answer to this, but it involve ripping up some of APIs using sg lists. Cc: [email protected] Fixes: 2541626 ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs") Signed-off-by: Dave Airlie <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

commit 9b340ae upstream. Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup, when the iommu is enabled: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [frank-w#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ frank-w#30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 Fix this by using the non-coherent allocator instead, I think there might be a better answer to this, but it involve ripping up some of APIs using sg lists. Cc: [email protected] Fixes: 2541626 ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs") Signed-off-by: Dave Airlie <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 9b340ae upstream. Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup, when the iommu is enabled: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 Fix this by using the non-coherent allocator instead, I think there might be a better answer to this, but it involve ripping up some of APIs using sg lists. Cc: [email protected] Fixes: 2541626 ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs") Signed-off-by: Dave Airlie <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

Initialize the struct da7213_priv::ctrl_lock mutex. Without it the following stack trace is displayed when rebooting and lockdep is enabled: DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 180 at kernel/locking/mutex.c:564 __mutex_lock+0x254/0x4e4 CPU: 0 UID: 0 PID: 180 Comm: alsactl Not tainted 6.13.0-next-20250123-arm64-renesas-00002-g132083a22d3d #30 Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mutex_lock+0x254/0x4e4 lr : __mutex_lock+0x254/0x4e4 sp : ffff800082c13c00 x29: ffff800082c13c00 x28: ffff00001002b500 x27: 0000000000000000 x26: 0000000000000000 x25: ffff800080b30db4 x24: 0000000000000002 x23: ffff800082c13c70 x22: 0000ffffc2a68a70 x21: ffff000010348000 x20: 0000000000000000 x19: ffff00000be2e488 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 00000000000003c1 x13: 00000000000003c1 x12: 0000000000000000 x11: 0000000000000011 x10: 0000000000001420 x9 : ffff800082c13a70 x8 : 0000000000000001 x7 : ffff800082c13a50 x6 : ffff800082c139e0 x5 : ffff800082c14000 x4 : ffff800082c13a50 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00001002b500 Call trace: __mutex_lock+0x254/0x4e4 (P) mutex_lock_nested+0x20/0x28 da7213_volsw_locked_get+0x34/0x60 snd_ctl_elem_read+0xbc/0x114 snd_ctl_ioctl+0x878/0xa70 __arm64_sys_ioctl+0x94/0xc8 invoke_syscall+0x44/0x104 el0_svc_common.constprop.0+0xb4/0xd4 do_el0_svc+0x18/0x20 el0_svc+0x3c/0xf0 el0t_64_sync_handler+0xc0/0xc4 el0t_64_sync+0x154/0x158 irq event stamp: 7713 hardirqs last enabled at (7713): [<ffff800080170d94>] ktime_get_coarse_real_ts64+0xf0/0x10c hardirqs last disabled at (7712): [<ffff800080170d58>] ktime_get_coarse_real_ts64+0xb4/0x10c softirqs last enabled at (7550): [<ffff8000800179d4>] fpsimd_restore_current_state+0x30/0xb8 softirqs last disabled at (7548): [<ffff8000800179a8>] fpsimd_restore_current_state+0x4/0xb8 ---[ end trace 0000000000000000 ]--- Fixes: 64c3259 ("ASoC: da7213: Add new kcontrol for tonegen") Cc: [email protected] Signed-off-by: Claudiu Beznea <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>

ummakynes and others added 30 commits June 12, 2018 19:12

netfilter: nft_socket: fix module autoload

3fb61ec

Add alias definition for module autoload when adding socket rules. Fixes: 554ced0 ("netfilter: nf_tables: add support for native socket matching") Signed-off-by: Pablo Neira Ayuso <[email protected]>

autofs: Fix typo s/thenew new/the new/ in AUTOFS4_FS description

ea8781e

Fixes: a2225d9 ("autofs: remove left-over autofs4 stubs") Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

4.18-rc1 #30

4.18-rc1 #30

frank-w commented Jun 17, 2018

4.18-rc1 #30

4.18-rc1 #30

Conversation

frank-w commented Jun 17, 2018