Add lantiq devices as BROKEN

[heini66]

Patch 1 of 2
Addd initial lantiq support

[heini66]

flash sysupgrade via bootloader -> mtd1

[rotanid]

you supply way too less information for two new targets and new devices.
please
a) check https://github.com/freifunk-gluon/gluon/wiki/Device-Integration
b) follow https://github.com/freifunk-gluon/gluon/wiki/Device-Integration-checklist
c) don't do PRs like this one here, which does not do anything with any effect on Gluon. This PR should have been split in half into your other two PRs, so the target and it's first device are added together. please do this together with b) , after you have read a). afterwards, we can close this PR here.

thank you for your contribution and for understanding my reasoning

[heini66]

thanks for your comments. i'll try to get my next pr a little bit more ...
might you vistit up in https://forum.freifunk.net/t/alte-fritzbox-als-freifunk-repeater/21154 to clearify some things? ;)

[blocktrron]

Regarding the State of AVM lantiq boards in 18.06:

1. Their naming is ... interesting. Describing boards with iterating marketing titles is not the kind of thing we want / need. However, conflicts have not arised (and the naming is fixed in https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=d4ba7bab25c84478ce3aa5ebd80d24b5a5624e7b )

2. The LED mappings were very inconsistent, as the Power LED had duplicate mappings for indicating running as well as DSL state on some devices, on others DSL state was mapped on the Info LED. For us, this means no indication of setup mode on these boards. However, i've tried to clean up this mess here: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=3032bf7f89e8ad5b69ab2f031287f475e5d2b829

[heini66]

https://www.ip-phone-forum.de/threads/versionen-der-7360.265609/ this might be helpfull for the 7360 versions ... Am Di., 3. Sept. 2019 um 21:59 Uhr schrieb David Bauer < [email protected]>:

…

Regarding the State of AVM lantiq boards in 18.06: 1. Their naming is ... interesting. Describing boards with iterating marketing titles is not the kind of thing we want / need. However, conflicts have not arised (and the naming is fixed in https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=d4ba7bab25c84478ce3aa5ebd80d24b5a5624e7b ) 2. The LED mappings were very inconsistent, as the Power LED had duplicate mappings for indicating running as well as DSL state on some devices, on others DSL state was mapped on the Info LED. For us, this means no indication of setup mode on these boards. However, i've tried to clean up this mess here: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=3032bf7f89e8ad5b69ab2f031287f475e5d2b829 — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#1803?email_source=notifications&email_token=ABMZ4WDOGA4USG7OV4E43KLQH26YJA5CNFSM4ISTRMKKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD5ZMHWA#issuecomment-527614936>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ABMZ4WBETJYES5ELONAIZ2TQH26YJANCNFSM4ISTRMKA> .

[mweinelt]

Let's postpone this until after v2019.1, so we can base this on OpenWrt v19.0[789012].

[mweinelt]

@heini66 Thank you for you interest in getting more devices upstream. I'm closing these pulls (#1803 #1804 #1805) because the form given isn't actionable to the Gluon maintainers.

• Please create one pull request per device you want to add support for.
• If a new target has to be added, do it in the commit where you add the first device to the target (cmp. e395284)
• For each device we need a test protocol (copy from https://github.com/freifunk-gluon/gluon/wiki/Device-Integration-checklist)

Also please wait until we've merged #1791 and base your changes on that. Thank you!