Scripting & documenting debugging one test without anything else in the loop.

docs/debugging-tests.md

@@ -0,0 +1,88 @@
+# Debugging Tests Tips
+
+## How to run & debug a specific test without anything else to keep the feedback loop short?
+
+There is a script called debug-test.sh in the scripts folder whose parameter takes a REGEX and an optional test number.
+
+For example, running the following command will output an interactive list from which you can select a test. It takes this form:
+
+`debug-test.sh [OPTION]... <test_regex> <test_number>`
+
+It will then build & run in the debugger for you.
+
+```bash
+./scripts/debug-test.sh test-tokenizer
+
+# Once in the debugger, i.e. at the chevrons prompt, setting a breakpoint could be as follows:
+>>> b main
+```
+
+For further reference use `debug-test.sh -h` to print help.
+
+&nbsp;
+
+### How does the script work?
+If you want to be able to use the concepts contained in the script separately, the important ones are briefly outlined below.
+
+#### Step 1: Reset and Setup folder context
+
+From base of this repository, let's create `build-ci-debug` as our build context.
+
+```bash
+rm -rf build-ci-debug && mkdir build-ci-debug && cd build-ci-debug
+```
+
+#### Step 2: Setup Build Environment and Compile Test Binaries
+
+Setup and trigger a build under debug mode. You may adapt the arguments as needed, but in this case these are sane defaults.
+
+```bash
+cmake -DCMAKE_BUILD_TYPE=Debug -DLLAMA_CUDA=1 -DLLAMA_FATAL_WARNINGS=ON ..
+make -j
+```
+
+#### Step 3.1: Identify Test Command for Debugging
+
+The output of this command will give you the command & arguments needed to run GDB.
+
+* `-R test-tokenizer` : looks for all the test files named test-tokenizer* (R=Regex)
+* `-N` : "show-only" disables test execution & shows test commands that you can feed to GDB.
+* `-V` : Verbose Mode
+
+```bash
+ctest -R "test-tokenizer" -V -N
+```
+
+This may return output similar to below (focusing on key lines to pay attention to):
+
+```bash
+...
+1: Test command: ~/llama.cpp/build-ci-debug/bin/test-tokenizer-0 "~/llama.cpp/tests/../models/ggml-vocab-llama-spm.gguf"
+1: Working Directory: .
+Labels: main
+  Test  #1: test-tokenizer-0-llama-spm
+...
+4: Test command: ~/llama.cpp/build-ci-debug/bin/test-tokenizer-0 "~/llama.cpp/tests/../models/ggml-vocab-falcon.gguf"
+4: Working Directory: .
+Labels: main
+  Test  #4: test-tokenizer-0-falcon
+...
+```
+
+So for test #1 we can tell these two pieces of relevant information:
+* Test Binary: `~/llama.cpp/build-ci-debug/bin/test-tokenizer-0`
+* Test GGUF Model: `~/llama.cpp/tests/../models/ggml-vocab-llama-spm.gguf`
+
+#### Step 3.2: Run GDB on test command
+
+Based on the ctest 'test command' report above we can then run a gdb session via this command below:
+
+```bash
+gdb --args ${Test Binary} ${Test GGUF Model}
+```
+
+Example:
+
+```bash
+gdb --args ~/llama.cpp/build-ci-debug/bin/test-tokenizer-0 "~/llama.cpp/tests/../models/ggml-vocab-llama-spm.gguf"
+```

scripts/debug-test.sh

@@ -0,0 +1,118 @@
+#!/bin/bash
+test_suite=${1:-}
+test_number=${2:-}
+
+PROG=${0##*/}
+build_dir="build-ci-debug"
+
+if [ x"$1" = x"-h" ] || [ x"$1" = x"--help" ]; then
+    echo "Usage: $PROG [OPTION]... <test_regex> <test_number>"
+    echo "Debug specific ctest program."
+    echo
+    echo "Options:"
+    echo "  -h, --help       Display this help and exit"
+    echo
+    echo "Arguments:"
+    echo "  <test_regex>     (Mandatory) Supply one regex to the script to filter tests"
+    echo "  (test_number)    (Optional) Test number to run a specific test"
+    echo
+    echo "Example:"
+    echo "  $PROG test-tokenizer"
+    echo "  $PROG test-tokenizer 3"
+    echo
+    exit 0
+fi
+
+# Function to select and debug a test
+function select_test() {
+    test_suite=${1:-test}
+    test_number=${2:-}
+
+    # Sanity Check If Tests Is Detected
+    printf "\n\nGathering tests that fit REGEX: ${test_suite} ...\n"
+    tests=($(ctest -R ${test_suite} -V -N | grep -E " +Test +#[0-9]+*" | cut -d':' -f2 | awk '{$1=$1};1'))
+    if [ ${#tests[@]} -eq 0 ]
+    then
+        echo "No tests avaliable... check your compliation process..."
+        echo "Exiting."
+        exit 1
+    fi
+
+    if [ -z $test_number ]
+    then
+        # List out avaliable tests
+        printf "Which test would you like to debug?\n"
+        id=0
+        for s in "${tests[@]}"
+        do
+            echo "Test# ${id}"
+            echo "  $s"
+            ((id++))
+        done
+
+        # Prompt user which test they wanted to run
+        printf "\nRun test#? "
+        read test_number
+    else
+        printf "\nUser Already Requested #${test_number}"
+    fi
+
+    # Start GDB with the requested test binary and arguments
+    printf "Debugging(GDB) test: ${tests[test_number]}\n"
+    # Change IFS (Internal Field Separator)
+    sIFS=$IFS
+    IFS=$'\n'
+
+    # Get test args
+    gdb_args=($(ctest -R ${test_suite} -V -N | grep "Test command" | cut -d':' -f3 | awk '{$1=$1};1' ))
+    IFS=$sIFS
+    printf "Debug arguments: ${gdb_args[test_number]}\n\n"
+
+    # Expand paths if needed
+    args=()
+    for x in $(echo ${gdb_args[test_number]} | sed -e 's/"\/\<//' -e 's/\>"//')
+    do
+        args+=($(echo $x | sed -e 's/.*\/..\//..\//'))
+    done
+
+    # Execute debugger
+    echo "gdb args: ${args[@]}"
+    gdb --args ${args[@]}
+}
+
+# Step 0: Check the args
+if [ -z "$test_suite" ]
+then
+    echo "Usage: $0 [test_regex] [test_number]"
+    echo "e.g., $0 test-tokenizer"
+    echo "      $0 test-tokenizer 3"
+    echo "Supply one regex to the script to filter tests,"
+    echo "and optionally a test number to run a specific test."
+    exit 1
+fi
+
+# Step 1: Reset and Setup folder context
+## Sanity check that we are actually in a git repo
+repo_root=$(git rev-parse --show-toplevel)
+if [ ! -d "$repo_root" ]; then
+    echo "Error: Not in a Git repository."
+    exit 1
+fi
+
+## Reset folder to root context of git repo
+pushd "$repo_root" || exit 1
+
+## Create and enter build directory
+rm -rf "$build_dir" && mkdir "$build_dir" || exit 1
+
+# Step 2: Setup Build Environment and Compile Test Binaries
+cmake -B "./$build_dir" -DCMAKE_BUILD_TYPE=Debug -DLLAMA_CUDA=1 -DLLAMA_FATAL_WARNINGS=ON || exit 1
+pushd "$build_dir" && make -j || exit 1
+
+# Step 3: Debug the Test
+select_test "$test_suite" "$test_number"
+
+# Step 4: Return to the directory from which the user ran the command.
+popd || exit 1
+popd || exit 1
+popd || exit 1