Improve formatting in component files

homeassistant/components/advantage_air/binary_sensor.py

@@ -66,7 +66,7 @@ class AdvantageAirZoneMotion(AdvantageAirZoneEntity, BinarySensorEntity):
     def __init__(self, instance: AdvantageAirData, ac_key: str, zone_key: str) -> None:
         """Initialize an Advantage Air Zone Motion sensor."""
         super().__init__(instance, ac_key, zone_key)
-        self._attr_name = f'{self._zone["name"]} motion'
+        self._attr_name = f"{self._zone['name']} motion"
         self._attr_unique_id += "-motion"
 
     @property
@@ -84,7 +84,7 @@ class AdvantageAirZoneMyZone(AdvantageAirZoneEntity, BinarySensorEntity):
     def __init__(self, instance: AdvantageAirData, ac_key: str, zone_key: str) -> None:
         """Initialize an Advantage Air Zone MyZone sensor."""
         super().__init__(instance, ac_key, zone_key)
-        self._attr_name = f'{self._zone["name"]} myZone'
+        self._attr_name = f"{self._zone['name']} myZone"
         self._attr_unique_id += "-myzone"
 
     @property

homeassistant/components/advantage_air/sensor.py

@@ -103,7 +103,7 @@ class AdvantageAirZoneVent(AdvantageAirZoneEntity, SensorEntity):
     def __init__(self, instance: AdvantageAirData, ac_key: str, zone_key: str) -> None:
         """Initialize an Advantage Air Zone Vent Sensor."""
         super().__init__(instance, ac_key, zone_key=zone_key)
-        self._attr_name = f'{self._zone["name"]} vent'
+        self._attr_name = f"{self._zone['name']} vent"
         self._attr_unique_id += "-vent"
 
     @property
@@ -131,7 +131,7 @@ class AdvantageAirZoneSignal(AdvantageAirZoneEntity, SensorEntity):
     def __init__(self, instance: AdvantageAirData, ac_key: str, zone_key: str) -> None:
         """Initialize an Advantage Air Zone wireless signal sensor."""
         super().__init__(instance, ac_key, zone_key)
-        self._attr_name = f'{self._zone["name"]} signal'
+        self._attr_name = f"{self._zone['name']} signal"
         self._attr_unique_id += "-signal"
 
     @property
@@ -165,7 +165,7 @@ class AdvantageAirZoneTemp(AdvantageAirZoneEntity, SensorEntity):
     def __init__(self, instance: AdvantageAirData, ac_key: str, zone_key: str) -> None:
         """Initialize an Advantage Air Zone Temp Sensor."""
         super().__init__(instance, ac_key, zone_key)
-        self._attr_name = f'{self._zone["name"]} temperature'
+        self._attr_name = f"{self._zone['name']} temperature"
         self._attr_unique_id += "-temp"
 
     @property

homeassistant/components/airthings/sensor.py

@@ -155,8 +155,7 @@ def __init__(
         self._id = airthings_device.device_id
         self._attr_device_info = DeviceInfo(
             configuration_url=(
-                "https://dashboard.airthings.com/devices/"
-                f"{airthings_device.device_id}"
+                f"https://dashboard.airthings.com/devices/{airthings_device.device_id}"
             ),
             identifiers={(DOMAIN, airthings_device.device_id)},
             name=airthings_device.name,

homeassistant/components/airvisual_pro/sensor.py

@@ -50,7 +50,7 @@ class AirVisualProMeasurementDescription(SensorEntityDescription):
         state_class=SensorStateClass.MEASUREMENT,
         value_fn=lambda settings, status, measurements, history: int(
             history.get(
-                f'Outdoor {"AQI(US)" if settings["is_aqi_usa"] else "AQI(CN)"}', -1
+                f"Outdoor {'AQI(US)' if settings['is_aqi_usa'] else 'AQI(CN)'}", -1
             )
         ),
         translation_key="outdoor_air_quality_index",

homeassistant/components/automation/__init__.py

@@ -636,9 +636,9 @@ async def async_trigger(
         alias = ""
         if "trigger" in run_variables:
             if "description" in run_variables["trigger"]:
-                reason = f' by {run_variables["trigger"]["description"]}'
+                reason = f" by {run_variables['trigger']['description']}"
             if "alias" in run_variables["trigger"]:
-                alias = f' trigger \'{run_variables["trigger"]["alias"]}\''
+                alias = f" trigger '{run_variables['trigger']['alias']}'"
         self._logger.debug("Automation%s triggered%s", alias, reason)
 
         # Create a new context referring to the old context.

homeassistant/components/balboa/entity.py

@@ -20,7 +20,7 @@ def __init__(self, client: SpaClient, key: str) -> None:
         """Initialize the control."""
         mac = client.mac_address
         model = client.model
-        self._attr_unique_id = f'{model}-{key}-{mac.replace(":","")[-6:]}'
+        self._attr_unique_id = f"{model}-{key}-{mac.replace(':', '')[-6:]}"
         self._attr_device_info = DeviceInfo(
             identifiers={(DOMAIN, mac)},
             name=model,

homeassistant/components/blueprint/importer.py

@@ -136,7 +136,7 @@ def _extract_blueprint_from_community_topic(
         )
 
     return ImportedBlueprint(
-        f'{post["username"]}/{topic["slug"]}', block_content, blueprint
+        f"{post['username']}/{topic['slug']}", block_content, blueprint
     )
 
 

homeassistant/components/bthome/logbook.py

@@ -26,7 +26,7 @@ def async_describe_bthome_event(event: Event[BTHomeBleEvent]) -> dict[str, str]:
         """Describe bthome logbook event."""
         data = event.data
         device = dev_reg.async_get(data["device_id"])
-        name = device and device.name or f'BTHome {data["address"]}'
+        name = device and device.name or f"BTHome {data['address']}"
         if properties := data["event_properties"]:
             message = f"{data['event_class']} {data['event_type']}: {properties}"
         else:

homeassistant/components/compensation/__init__.py

@@ -42,7 +42,7 @@ def datapoints_greater_than_degree(value: dict) -> dict:
     if len(value[CONF_DATAPOINTS]) <= value[CONF_DEGREE]:
         raise vol.Invalid(
             f"{CONF_DATAPOINTS} must have at least"
-            f" {value[CONF_DEGREE]+1} {CONF_DATAPOINTS}"
+            f" {value[CONF_DEGREE] + 1} {CONF_DATAPOINTS}"
         )
 
     return value

homeassistant/components/doods/image_processing.py

@@ -266,7 +266,7 @@ def _save_image(self, image, matches, paths):
 
             # Draw detected objects
             for instance in values:
-                box_label = f'{label} {instance["score"]:.1f}%'
+                box_label = f"{label} {instance['score']:.1f}%"
                 # Already scaled, use 1 for width and height
                 draw_box(
                     draw,

homeassistant/components/duke_energy/coordinator.py

@@ -85,7 +85,7 @@ async def _async_update_data(self) -> None:
                 )
                 continue
 
-            id_prefix = f"{meter["serviceType"].lower()}_{serial_number}"
+            id_prefix = f"{meter['serviceType'].lower()}_{serial_number}"
             consumption_statistic_id = f"{DOMAIN}:{id_prefix}_energy_consumption"
             self._statistic_ids.add(consumption_statistic_id)
             _LOGGER.debug(
@@ -136,7 +136,7 @@ async def _async_update_data(self) -> None:
                 )
 
             name_prefix = (
-                f"Duke Energy " f"{meter["serviceType"].capitalize()} {serial_number}"
+                f"Duke Energy {meter['serviceType'].capitalize()} {serial_number}"
             )
             consumption_metadata = StatisticMetaData(
                 has_mean=False,

homeassistant/components/ecobee/climate.py

@@ -603,7 +603,7 @@ def remote_sensor_devices(self) -> list:
         """Return the remote sensor device name_by_user or name for the thermostat."""
         return sorted(
             [
-                f'{item["name_by_user"]} ({item["id"]})'
+                f"{item['name_by_user']} ({item['id']})"
                 for item in self.remote_sensor_ids_names
             ]
         )
@@ -873,7 +873,7 @@ def set_sensors_used_in_climate(
                 translation_placeholders={
                     "options": ", ".join(
                         [
-                            f'{item["name_by_user"]} ({item["id"]})'
+                            f"{item['name_by_user']} ({item['id']})"
                             for item in self.remote_sensor_ids_names
                         ]
                     )

homeassistant/components/ecobee/notify.py

@@ -34,7 +34,7 @@ def __init__(self, data: EcobeeData, thermostat_index: int) -> None:
         """Initialize the thermostat."""
         super().__init__(data, thermostat_index)
         self._attr_unique_id = (
-            f"{self.thermostat["identifier"]}_notify_{thermostat_index}"
+            f"{self.thermostat['identifier']}_notify_{thermostat_index}"
         )
 
     def send_message(self, message: str, title: str | None = None) -> None:

homeassistant/components/flux_led/__init__.py

@@ -133,7 +133,7 @@ def _async_migrator(entity_entry: er.RegistryEntry) -> dict[str, Any] | None:
             and mac_matches_by_one(entity_mac, unique_id)
         ):
             # Old format {dhcp_mac}....., New format {discovery_mac}....
-            new_unique_id = f"{unique_id}{entity_unique_id[len(unique_id):]}"
+            new_unique_id = f"{unique_id}{entity_unique_id[len(unique_id) :]}"
         else:
             return None
         _LOGGER.debug(

homeassistant/components/fronius/sensor.py

@@ -794,7 +794,7 @@ def __init__(
             "unit"
         )
         self._attr_unique_id = (
-            f'{logger_data["unique_identifier"]["value"]}-{description.key}'
+            f"{logger_data['unique_identifier']['value']}-{description.key}"
         )
 
 
@@ -815,7 +815,7 @@ def __init__(
         if (meter_uid := meter_data["serial"]["value"]) == "n.a.":
             meter_uid = (
                 f"{coordinator.solar_net.solar_net_device_id}:"
-                f'{meter_data["model"]["value"]}'
+                f"{meter_data['model']['value']}"
             )
 
         self._attr_device_info = DeviceInfo(
@@ -849,7 +849,7 @@ def __init__(
             sw_version=device_data["software"]["value"],
             via_device=(DOMAIN, coordinator.solar_net.solar_net_device_id),
         )
-        self._attr_unique_id = f'{device_data["serial"]["value"]}-{description.key}'
+        self._attr_unique_id = f"{device_data['serial']['value']}-{description.key}"
 
 
 class PowerFlowSensor(_FroniusSensorEntity):
@@ -883,7 +883,7 @@ def __init__(
         super().__init__(coordinator, description, solar_net_id)
         storage_data = self._device_data()
 
-        self._attr_unique_id = f'{storage_data["serial"]["value"]}-{description.key}'
+        self._attr_unique_id = f"{storage_data['serial']['value']}-{description.key}"
         self._attr_device_info = DeviceInfo(
             identifiers={(DOMAIN, storage_data["serial"]["value"])},
             manufacturer=storage_data["manufacturer"]["value"],

homeassistant/components/harmony/data.py

@@ -124,8 +124,7 @@ async def connect(self) -> None:
         except (ValueError, AttributeError) as err:
             await self._client.close()
             raise ConfigEntryNotReady(
-                f"{self.name}: Error {err} while connected HUB at:"
-                f" {self._address}:8088"
+                f"{self.name}: Error {err} while connected HUB at: {self._address}:8088"
             ) from err
         if not connected:
             await self._client.close()

homeassistant/components/hisense_aehw4a1/climate.py

@@ -195,7 +195,7 @@ async def async_update(self) -> None:
             fan_mode = status["wind_status"]
             self._attr_fan_mode = AC_TO_HA_FAN_MODES[fan_mode]
 
-            swing_mode = f'{status["up_down"]}{status["left_right"]}'
+            swing_mode = f"{status['up_down']}{status['left_right']}"
             self._attr_swing_mode = AC_TO_HA_SWING[swing_mode]
 
             if self._attr_hvac_mode in (HVACMode.COOL, HVACMode.HEAT):

homeassistant/components/hive/entity.py

@@ -21,7 +21,7 @@ def __init__(self, hive: Hive, hive_device: dict[str, Any]) -> None:
         self.hive = hive
         self.device = hive_device
         self._attr_name = self.device["haName"]
-        self._attr_unique_id = f'{self.device["hiveID"]}-{self.device["hiveType"]}'
+        self._attr_unique_id = f"{self.device['hiveID']}-{self.device['hiveType']}"
         self._attr_device_info = DeviceInfo(
             identifiers={(DOMAIN, self.device["device_id"])},
             model=self.device["deviceData"]["model"],

homeassistant/components/homekit/iidmanager.py

@@ -102,8 +102,8 @@ def get_or_allocate_iid(
         char_hap_type: str | None = uuid_to_hap_type(char_uuid) if char_uuid else None
         # Allocation key must be a string since we are saving it to JSON
         allocation_key = (
-            f'{service_hap_type}_{service_unique_id or ""}_'
-            f'{char_hap_type or ""}_{char_unique_id or ""}'
+            f"{service_hap_type}_{service_unique_id or ''}_"
+            f"{char_hap_type or ''}_{char_unique_id or ''}"
         )
         # AID must be a string since JSON keys cannot be int
         aid_str = str(aid)

homeassistant/components/homekit/type_triggers.py

@@ -48,7 +48,7 @@ def __init__(
         for idx, trigger in enumerate(device_triggers):
             type_: str = trigger["type"]
             subtype: str | None = trigger.get("subtype")
-            unique_id = f'{type_}-{subtype or ""}'
+            unique_id = f"{type_}-{subtype or ''}"
             entity_id: str | None = None
             if (entity_id_or_uuid := trigger.get("entity_id")) and (
                 entry := ent_reg.async_get(entity_id_or_uuid)
@@ -122,7 +122,7 @@ async def async_trigger(
         """
         reason = ""
         if "trigger" in run_variables and "description" in run_variables["trigger"]:
-            reason = f' by {run_variables["trigger"]["description"]}'
+            reason = f" by {run_variables['trigger']['description']}"
         _LOGGER.debug("Button triggered%s - %s", reason, run_variables)
         idx = int(run_variables["trigger"]["idx"])
         self.triggers[idx].set_value(0)

homeassistant/components/homekit_controller/connection.py

@@ -323,8 +323,7 @@ async def async_setup(self) -> None:
                     self.hass,
                     self.async_update_available_state,
                     timedelta(seconds=BLE_AVAILABILITY_CHECK_INTERVAL),
-                    name=f"HomeKit Device {self.unique_id} BLE availability "
-                    "check poll",
+                    name=f"HomeKit Device {self.unique_id} BLE availability check poll",
                 )
             )
             # BLE devices always get an RSSI sensor as well

homeassistant/components/ihc/entity.py

@@ -43,7 +43,7 @@ def __init__(
             self.suggested_area = product.get("group")
             if "id" in product:
                 product_id = product["id"]
-                self.device_id = f"{controller_id}_{product_id }"
+                self.device_id = f"{controller_id}_{product_id}"
                 # this will name the device the same way as the IHC visual application: Product name + position
                 self.device_name = product["name"]
                 if self.ihc_position:

homeassistant/components/ista_ecotrend/config_flow.py

@@ -66,7 +66,7 @@ async def async_step_user(
             else:
                 if TYPE_CHECKING:
                     assert info
-                title = f"{info["firstName"]} {info["lastName"]}".strip()
+                title = f"{info['firstName']} {info['lastName']}".strip()
                 await self.async_set_unique_id(info["activeConsumptionUnit"])
                 self._abort_if_unique_id_configured()
                 return self.async_create_entry(

homeassistant/components/isy994/select.py

@@ -45,7 +45,7 @@
 def time_string(i: int) -> str:
     """Return a formatted ramp rate time string."""
     if i >= 60:
-        return f"{(float(i)/60):.1f} {UnitOfTime.MINUTES}"
+        return f"{(float(i) / 60):.1f} {UnitOfTime.MINUTES}"
     return f"{i} {UnitOfTime.SECONDS}"
 
 

homeassistant/components/keymitt_ble/config_flow.py

@@ -34,7 +34,7 @@ def short_address(address: str) -> str:
 
 def name_from_discovery(discovery: MicroBotAdvertisement) -> str:
     """Get the name from a discovery."""
-    return f'{discovery.data["local_name"]} {short_address(discovery.address)}'
+    return f"{discovery.data['local_name']} {short_address(discovery.address)}"
 
 
 class MicroBotConfigFlow(ConfigFlow, domain=DOMAIN):

homeassistant/components/knx/expose.py

@@ -88,7 +88,7 @@ def __init__(
         self._remove_listener: Callable[[], None] | None = None
         self.device: ExposeSensor = ExposeSensor(
             xknx=self.xknx,
-            name=f"{self.entity_id}__{self.expose_attribute or "state"}",
+            name=f"{self.entity_id}__{self.expose_attribute or 'state'}",
             group_address=config[KNX_ADDRESS],
             respond_to_read=config[CONF_RESPOND_TO_READ],
             value_type=self.expose_type,

homeassistant/components/kostal_plenticore/coordinator.py

@@ -101,8 +101,8 @@ async def async_setup(self) -> bool:
             model=f"{prod1} {prod2}",
             name=settings["scb:network"][hostname_id],
             sw_version=(
-                f'IOC: {device_local["Properties:VersionIOC"]}'
-                f' MC: {device_local["Properties:VersionMC"]}'
+                f"IOC: {device_local['Properties:VersionIOC']}"
+                f" MC: {device_local['Properties:VersionMC']}"
             ),
         )
 

homeassistant/components/lacrosse_view/config_flow.py

@@ -40,7 +40,7 @@ async def validate_input(hass: HomeAssistant, data: dict[str, Any]) -> list[Loca
         raise InvalidAuth from error
 
     if not locations:
-        raise NoLocations(f'No locations found for account {data["username"]}')
+        raise NoLocations(f"No locations found for account {data['username']}")
 
     return locations
 

homeassistant/components/lcn/helpers.py

@@ -90,9 +90,9 @@ def get_resource(domain_name: str, domain_data: ConfigType) -> str:
     if domain_name == "cover":
         return cast(str, domain_data["motor"])
     if domain_name == "climate":
-        return f'{domain_data["source"]}.{domain_data["setpoint"]}'
+        return f"{domain_data['source']}.{domain_data['setpoint']}"
     if domain_name == "scene":
-        return f'{domain_data["register"]}.{domain_data["scene"]}'
+        return f"{domain_data['register']}.{domain_data['scene']}"
     raise ValueError("Unknown domain")
 
 

homeassistant/components/lektrico/config_flow.py

@@ -116,7 +116,7 @@ async def _get_lektrico_device_settings_and_treat_unique_id(self) -> None:
         self._serial_number = str(settings["serial_number"])
         self._device_type = settings["type"]
         self._board_revision = settings["board_revision"]
-        self._name = f"{settings["type"]}_{self._serial_number}"
+        self._name = f"{settings['type']}_{self._serial_number}"
 
         # Check if already configured
         # Set unique id

homeassistant/components/lg_thinq/mqtt.py

@@ -168,7 +168,7 @@ def on_message_received(
     async def async_handle_device_event(self, message: dict) -> None:
         """Handle received mqtt message."""
         unique_id = (
-            f"{message["deviceId"]}_{list(message["report"].keys())[0]}"
+            f"{message['deviceId']}_{list(message['report'].keys())[0]}"
             if message["deviceType"] == DeviceType.WASHTOWER
             else message["deviceId"]
         )

homeassistant/components/lovelace/cast.py

@@ -101,7 +101,7 @@ async def async_browse_media(
             BrowseMedia(
                 title=view["title"],
                 media_class=MediaClass.APP,
-                media_content_id=f'{info["url_path"]}/{view["path"]}',
+                media_content_id=f"{info['url_path']}/{view['path']}",
                 media_content_type=DOMAIN,
                 thumbnail="https://brands.home-assistant.io/_/lovelace/logo.png",
                 can_play=True,

homeassistant/components/lutron_caseta/button.py

@@ -53,7 +53,7 @@ async def async_setup_entry(
 
         # Append the child device name to the end of the parent keypad
         # name to create the entity name
-        full_name = f'{parent_device_info.get("name")} {device_name}'
+        full_name = f"{parent_device_info.get('name')} {device_name}"
         # Set the device_info to the same as the Parent Keypad
         # The entities will be nested inside the keypad device
         entities.append(

homeassistant/components/lutron_caseta/switch.py

@@ -44,7 +44,7 @@ def __init__(self, device, data):
         parent_keypad = keypads[device["parent_device"]]
         parent_device_info = parent_keypad["device_info"]
         # Append the child device name to the end of the parent keypad name to create the entity name
-        self._attr_name = f'{parent_device_info["name"]} {device["device_name"]}'
+        self._attr_name = f"{parent_device_info['name']} {device['device_name']}"
         # Set the device_info to the same as the Parent Keypad
         # The entities will be nested inside the keypad device
         self._attr_device_info = parent_device_info