ESP32S3 T-Display Multivariable-Multisensor example

.github/workflows/platformio.yml

@@ -27,16 +27,16 @@ jobs:
           python -m pip install --upgrade pip
           pip install -U platformio
           pio pkg update
-      - name: Submitted library code tests
+      - name: Basic Arduino IDE example test
         run: |
-          pio run
-      - name: PlatformIO registry test (M5CoreInk example)
+          cd examples/advanced_sensirion
+          pio run -s
+      - name: PlatformIO registry test (M5CoreInk project)
         run: |
           git clone https://github.com/hpsaturn/co2_m5coreink.git
           cd co2_m5coreink
-          pio run
-      - name: Arduino IDE example test
+          pio run -s 
+      - name: All archictures tests
         run: |
-          cd examples/advanced_sensirion
           pio run
-      
+

examples/advanced_sensirion/platformio.ini

@@ -11,6 +11,7 @@
 [platformio]
 src_dir = .
 lib_dir = ../..
+extra_configs = ../../unified-lib-deps.ini
 
 [wifi]
 ssid = ${sysenv.PIO_WIFI_SSID}         
@@ -24,26 +25,7 @@ build_flags =
   '-DWIFI_SSID="${wifi.ssid}"'
   '-DWIFI_PASS="${wifi.password}"'
   -D CORE_DEBUG_LEVEL=0
-lib_deps =	
-	adafruit/Adafruit Unified Sensor @ 1.1.7
-	adafruit/Adafruit BME280 Library @ 2.2.2
-	adafruit/Adafruit BMP280 Library @ 2.6.6
-	adafruit/Adafruit BME680 Library @ 2.0.2
-	adafruit/Adafruit SHT31 Library @ 2.2.0
-	adafruit/Adafruit SCD30 @ 1.0.9
-	adafruit/Adafruit BusIO @ 1.14.1
-	robtillaart/AM232X @ 0.4.5
-	paulvha/sps30 @ 1.4.16
-	wifwaf/MH-Z19 @ 1.5.4
-	jcomas/S8_UART @ 1.0.1
-	sensirion/Sensirion Core @ 0.6.0
-	sensirion/Sensirion I2C SCD4x @ 0.3.1
-	https://github.com/enjoyneering/AHTxx.git#eb21571
-	https://github.com/hpsaturn/DHT_nonblocking.git#ec6e5b9
-	https://github.com/paulvha/SN-GCJA5.git#f261968
-	https://github.com/jcomas/CM1106_UART.git#da0eb4e	
-
-
+lib_deps = ${commonlibs.lib_deps}
 
 [env:esp32dev]
 platform = espressif32

examples/ttgo_tdisplay_s3/platformio.ini

@@ -0,0 +1,50 @@
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; CanAirIO Sensors Library
+; Author: @hpsaturn
+; 20230129
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;
+; Basic multivariable multisensor example for 
+; TTGO T-Display S3 (LilyGO board).
+;
+; https://github.com/kike-canaries/canairio_sensorlib
+
+[platformio]
+src_dir = .
+lib_dir = ../..
+extra_configs = ../../unified-lib-deps.ini
+
+[wifi]
+ssid = ${sysenv.PIO_WIFI_SSID}         
+password = ${sysenv.PIO_WIFI_PASSWORD}
+
+[env]
+framework = arduino
+upload_speed = 1500000
+monitor_speed = 115200
+build_flags =
+  '-DWIFI_SSID="${wifi.ssid}"'
+  '-DWIFI_PASS="${wifi.password}"'
+  -D CORE_DEBUG_LEVEL=0
+lib_deps = ${commonlibs.lib_deps}
+
+[env:esp32s3]
+framework = ${env.framework}
+upload_speed = ${env.upload_speed}
+monitor_speed = ${env.monitor_speed}
+platform = espressif32 @ 5.0.0
+board = esp32-s3-devkitc-1
+platform_packages = framework-arduinoespressif32@https://github.com/espressif/arduino-esp32.git#2.0.3
+lib_deps = ${env.lib_deps}
+build_flags = 
+	${env.build_flags}
+	-DBOARD_HAS_PSRAM
+	-DARDUINO_USB_MODE=1 
+	-DARDUINO_USB_CDC_ON_BOOT=1 
+
+board_build.partitions = default_8MB.csv
+board_build.arduino.memory_type = qspi_opi
+board_build.flash_size = 8MB
+board_build.psram_type = opi
+
+

examples/ttgo_tdisplay_s3/src/main.cpp

@@ -0,0 +1,82 @@
+/**
+ * @file main.cpp
+ * @author Antonio Vanegas @hpsaturn
+ * @date June 2018 - 2022
+ * @brief CanAirIO Sensorslib tests
+ * @license GPL3
+ * 
+ * Full documentation:
+ * https://github.com/kike-canaries/canairio_sensorlib#canairio-air-quality-sensors-library
+ * 
+ * Full implementation for WiFi and Bluetooth Air Quality fixed and mobile station:
+ * https://github.com/kike-canaries/canairio_firmware#canairio-firmware
+ * 
+ * CanAirIO project documentation:
+ * https://canair.io/docs
+ */
+
+#include <Arduino.h>
+#include <Sensors.hpp>
+
+#define PIN_POWER_ON 15  // T-Display S3 Power pin
+
+void printSensorsDetected() {
+    uint16_t sensors_count =  sensors.getSensorsRegisteredCount();
+    uint16_t units_count   =  sensors.getUnitsRegisteredCount();
+    Serial.println("-->[MAIN] Sensors detected count\t: " + String(sensors_count));
+    Serial.println("-->[MAIN] Sensors units count  \t: " + String(units_count));
+    Serial.print(  "-->[MAIN] Sensors devices names\t: ");
+    int i = 0;
+    while (sensors.getSensorsRegistered()[i++] != 0) {
+        Serial.print(sensors.getSensorName((SENSORS)sensors.getSensorsRegistered()[i - 1]));
+        Serial.print(",");
+    }
+    Serial.println();
+}
+
+void printSensorsValues() {
+    Serial.println("-->[MAIN] Preview sensor values:");
+    UNIT unit = sensors.getNextUnit();
+    while(unit != UNIT::NUNIT) {
+        String uName = sensors.getUnitName(unit);
+        float uValue = sensors.getUnitValue(unit);
+        String uSymb = sensors.getUnitSymbol(unit);
+        Serial.printf("-->[MAIN] %s:\t%02.1f\t%s\n", uName.c_str(), uValue, uSymb.c_str());
+        unit = sensors.getNextUnit();
+    }
+}
+
+void onSensorDataOk() {
+    Serial.println("======= E X A M P L E   T E S T =========");
+    printSensorsDetected();
+    printSensorsValues(); 
+}
+
+void onSensorDataError(const char * msg){ 
+}
+/******************************************************************************
+*  M A I N
+******************************************************************************/
+
+void setup() {
+    pinMode(PIN_POWER_ON, OUTPUT);
+    digitalWrite(PIN_POWER_ON, HIGH);
+    delay(1000);                                     // Wait on T-Display S3 power on 
+    Serial.begin(115200);
+    delay(5000);                                     // Wait on T-Display S3 power on 
+    Serial.println("\n== Sensor test setup ==\n");
+    Serial.println("-->[SETUP] Detecting sensors..");
+
+    Wire.begin(43,44);                               // enable i2c for T-Display S3 board
+
+    sensors.setSampleTime(5);                        // config sensors sample time interval
+    sensors.setOnDataCallBack(&onSensorDataOk);      // all data read callback
+    sensors.setDebugMode(true);                     // [optional] debug mode
+    sensors.detectI2COnly(true);                     // disable force to only i2c sensors
+    sensors.init();                                  // Auto detection to UART and i2c sensors
+    delay(500);
+}
+
+void loop() {
+    sensors.loop();  // read sensor data and showed it
+}

platformio.ini

@@ -6,6 +6,7 @@
 [platformio]
 src_dir = ./examples/
 lib_dir = ./
+extra_configs = unified-lib-deps.ini
 
 [env]
 framework = arduino
@@ -17,29 +18,11 @@ build_flags =
 		; -D DHT11_ENABLED=1   // Deprecated, please change this old sensor
 		; -D DHT_SENSOR_TYPE=2
 		; -D DHT_SENSOR_PIN=19
-lib_deps =
-
-	adafruit/Adafruit Unified Sensor @ 1.1.7
-	adafruit/Adafruit BME280 Library @ 2.2.2
-	adafruit/Adafruit BMP280 Library @ 2.6.6
-	adafruit/Adafruit BME680 Library @ 2.0.2
-	adafruit/Adafruit SHT31 Library @ 2.2.0
-	adafruit/Adafruit SCD30 @ 1.0.9
-	adafruit/Adafruit BusIO @ 1.14.1
-	robtillaart/AM232X @ 0.4.5
-  paulvha/sps30 @ 1.4.16
-	wifwaf/MH-Z19 @ 1.5.4
-	jcomas/S8_UART @ 1.0.1
-	sensirion/Sensirion Core @ 0.6.0
-	sensirion/Sensirion I2C SCD4x @ 0.3.1
-	https://github.com/enjoyneering/AHTxx.git#eb21571
-	https://github.com/hpsaturn/DHT_nonblocking.git#ec6e5b9
-	https://github.com/paulvha/SN-GCJA5.git#f261968
-	https://github.com/jcomas/CM1106_UART.git#da0eb4e	
+lib_deps = ${commonlibs.lib_deps}
 
 [common]
 framework = ${env.framework}
-; upload_speed = ${env.upload_speed}
+upload_speed = ${env.upload_speed}
 monitor_speed = ${env.monitor_speed}
 build_flags = ${env.build_flags}
 lib_deps = ${env.lib_deps}

unified-lib-deps.ini

@@ -0,0 +1,19 @@
+[commonlibs]
+lib_deps = 
+  adafruit/Adafruit Unified Sensor @ 1.1.7
+  adafruit/Adafruit BME280 Library @ 2.2.2
+  adafruit/Adafruit BMP280 Library @ 2.6.6
+  adafruit/Adafruit BME680 Library @ 2.0.2
+  adafruit/Adafruit SHT31 Library @ 2.2.0
+  adafruit/Adafruit SCD30 @ 1.0.9
+  adafruit/Adafruit BusIO @ 1.14.1
+  robtillaart/AM232X @ 0.4.5
+  paulvha/sps30 @ 1.4.16
+  wifwaf/MH-Z19 @ 1.5.4
+  jcomas/S8_UART @ 1.0.1
+  sensirion/Sensirion Core @ 0.6.0
+  sensirion/Sensirion I2C SCD4x @ 0.3.1
+  https://github.com/enjoyneering/AHTxx.git#eb21571
+  https://github.com/hpsaturn/DHT_nonblocking.git#ec6e5b9
+  https://github.com/paulvha/SN-GCJA5.git#f261968
+  https://github.com/jcomas/CM1106_UART.git#da0eb4e