Av/i116 kelvin support

README.md

@@ -85,6 +85,7 @@ DHT22 is supported but is not recommended. Please see the documentation.
 - Unified calibration trigger for all CO2 sensors
 - Unified CO2 Altitude compensation
 - Unified temperature offset for CO2 and environment sensors
+- Add support for Kelvin and Fahrenheit on environment and CO2 sensors
 - Public access to main objects of each library (full methods access)
 - Get unit symbol and name and each sub-sensor
 - Get the main group type: NONE, PM, CO2 and ENV.
@@ -129,6 +130,7 @@ void setup() {
     sensors.setSeaLevelPressure(1036.25);           // [optional] Set sea level pressure in hpa
     sensors.setDebugMode(false);                    // [optional] debug mode to get detailed msgs
     sensors.detectI2COnly(true);                    // [optional] force to only i2c sensors
+    sensors.setTemperatureUnit(TEMPUNIT::KELVIN);   // comment it for Celsius or set Fahrenheit
     sensors.init();                                 // Auto detection to UART and i2c sensors
 
     // Alternatives only for UART sensors (TX/RX):
@@ -143,8 +145,6 @@ void setup() {
     // sensors.init(SENSORS::SAIRS8);               // Force UART detection to SenseAirS8 CO2 sensor
     // sensors.init(SENSORS::Auto,PMS_RX,PMS_TX);   // Auto detection on custom RX,TX
 
-
-
     // Also you can access to sub-library objects, and perform for example calls like next:
 
     // sensors.sps30.sleep()

examples/advanced_multivariable/platformio.ini

@@ -10,25 +10,39 @@
 
 [platformio]
 src_dir = .
+lib_dir = ../..
+extra_configs = ../../unified-lib-deps.ini
 
-[common_env_data]
+[env]
 framework = arduino
 upload_speed = 1500000
 monitor_speed = 115200
-lib_deps =
-    hpsaturn/CanAirIO Air Quality Sensors Library
+build_flags =
+    -D CORE_DEBUG_LEVEL=0
+	-D ARDUINO_ESP32_DEV=1
+	; -D DHT11_ENABLED=1   // Deprecated, please change this old sensor
+	; -D DHT_SENSOR_TYPE=2
+	; -D DHT_SENSOR_PIN=19
+lib_deps = ${commonlibs.lib_deps}
 
-[env:esp32dev]
+[common]
+framework = ${env.framework}
+upload_speed = ${env.upload_speed}
+monitor_speed = ${env.monitor_speed}
+build_flags = ${env.build_flags}
+lib_deps = ${env.lib_deps}
+
+[env:esp32]
+extends = common
 platform = espressif32
 board = esp32dev
-framework = ${common_env_data.framework}
-upload_speed = ${common_env_data.upload_speed}
-monitor_speed = ${common_env_data.monitor_speed}
-lib_deps = ${common_env_data.lib_deps}
 
 [env:esp8266]
+extends = common
 platform = espressif8266
 board = esp12e
-framework = ${common_env_data.framework}
-monitor_speed = ${common_env_data.monitor_speed}
-lib_deps = ${common_env_data.lib_deps}
+
+[env:atmelsam]
+extends = common
+platform = atmelsam
+board = seeed_wio_terminal

examples/advanced_multivariable/src/main.cpp

@@ -65,7 +65,8 @@ void setup() {
     sensors.setSampleTime(10);                       // config sensors sample time interval
     sensors.setOnDataCallBack(&onSensorDataOk);      // all data read callback
     sensors.setDebugMode(true);                      // [optional] debug mode
-    sensors.detectI2COnly(false);                    // disable force to only i2c sensors
+    sensors.detectI2COnly(true);                     // force to only i2c sensors
+    sensors.setTemperatureUnit(TEMPUNIT::KELVIN);    // comment for Celsius or set Fahrenheit
     sensors.init();                                  // Auto detection to UART and i2c sensors
     delay(1000);
 }

examples/m5atom/platformio.ini

@@ -8,6 +8,11 @@
 ; Please visit documentation for the other options and examples
 ; https://docs.platformio.org/page/projectconf.html
 
+[platformio]
+src_dir = .
+lib_dir = ../..
+extra_configs = ../../unified-lib-deps.ini
+
 [env:esp32dev]
 platform = espressif32
 board = esp32dev
@@ -18,6 +23,6 @@ build_flags =
     -D CORE_DEBUG_LEVEL=0
     -D M5ATOM
 lib_deps =
-	fastled/FastLED@^3.5.0
-	m5stack/M5Atom@^0.0.7
-    hpsaturn/CanAirIO Air Quality Sensors Library @ ^0.5.5
+    fastled/FastLED@^3.5.0
+    m5stack/M5Atom@^0.0.7
+    ${commonlibs.lib_deps}

library.json

@@ -1,6 +1,6 @@
 {
   "name": "CanAirIO Air Quality Sensors Library",
-  "version": "0.7.0",
+  "version": "0.7.1",
   "homepage":"https://canair.io",
   "keywords": 
   [ 

library.properties

@@ -1,5 +1,5 @@
 name=CanAirIO Air Quality Sensors Library
-version=0.7.0
+version=0.7.1
 author=@hpsaturn, CanAirIO project <[email protected]>
 maintainer=Antonio Vanegas <[email protected]>
 url=https://github.com/kike-canaries/canairio_sensorlib