Sngcja5l i2c

README.md

@@ -3,20 +3,44 @@
 
 # CanAirIO Air Quality Sensors Library
 
-Particle meter (PM) sensor manager for multiple (PM) sensors: Honeywell, Plantower, Panasonic, Sensirion, etc, also it handling others like AM2320 sensor.
+Particle meter (PM) sensor manager for multiple (PM) sensors: Honeywell, Plantower, Panasonic, Sensirion, etc and CO2 sensors. Also it handling others environment sensors.
 
-## Features
+# Supported sensors
+
+### PM sensors
+
+| Sensor model  | UART  | I2C  | Detection mode | Status |  
+|:----------------------- |:-----:|:-----:|:-------:|:----------:|
+| Honeywell HPMA115S0 | Yes | --- | Auto | DEPRECATED |
+| Panasonic SN-GCJA5L | Yes | Yes | Auto | STABLE |
+| Plantower models    | Yes | --- | Auto | STABLE |
+| Nova SDS011         | Yes | --- | Auto | STABLE |
+| Sensirion SPS30     | Yes | Yes | Select / Auto | STABLE |
+
+NOTE: Panasonic via UART in ESP8266 maybe needs select in detection
+
+### CO2 sensors
+
+| Sensor model  | UART  | i2c  | Detection mode | Status |  
+|:----------------------- |:-----:|:-----:|:-------:|:----------:|
+| Sensirion SCD30    | --- | Yes | Auto | STABLE |
+| MHZ19      | Yes | --- | Select | TESTING |
+| CMS1106    | Yes | --- | Select | TESTING |
+
+
+### Environmental sensors
+
+| Sensor model  | Protocol  | Detection mode | Status |  
+|:----------------------- |:-----:|:-------:|:----------:|
+| AM2320      | i2c |  Auto | STABLE |
+| SHT31       | i2c |  Auto | STABLE |
+| AHT10       | i2c |  Auto | STABLE |
+| BME280      | i2c |  Auto | STABLE |
+| BME680      | i2c |  Auto | STABLE |
+| DHT2x       | TwoWire |  Auto | DEPRECATED |
+
+NOTE: DHT22 is supported but is not recommended
 
-- [x] Auto detection for Generic sensors (Honeywell, Panasonic and Plantower sensors)
-- [x] Implemented `Sensirion` autodection flow (for original library)
-- [x] Disable/enable logs (debug mode flag)
-- [x] Added bme280, aht10, sht31, am2320 i2c sensors
-- [x] Exposed public sub-libraries objects, sps30, aht10, etc.
-- [x] Added old DHT sensors 
-- [x] Added CO2 sensors: MHZ19, SCD30, CM1106
-- [x] Added SDS011 particle metter
-- [x] BME680 support (from TTGO-T7 CanAirIO version)
-- [ ] IAQ indicator from BME680 Bosch library
 
 ## Usage
 
@@ -53,7 +77,9 @@ void setup() {
     sensors.setSampleTime(5);                       // config sensors sample time interval
     sensors.setOnDataCallBack(&onSensorDataOk);     // all data read callback
     sensors.setOnErrorCallBack(&onSensorDataError); // [optional] error callback
-    sensors.setDebugMode(true);                     // [optional] debug mode
+    sensors.setSampleTime(15);                      // [optional] sensors sample time (default 5s)
+    sensors.setDebugMode(false);                    // [optional] debug mode enable/disable
+    sensors.detectI2COnly(true);                    // [optional] force to only i2c sensors
     sensors.init();                                 // start all sensors and
                                                     // force to try autodetection,
                                                     // you can try to select one:
@@ -92,15 +118,41 @@ On your serial monitor you should have something like that:
 -->[MAIN] PM1.0: 002 PM2.5: 002 PM10: 002
 ```
 
-## Demo
+# Demo
 
 [![CanAirIO auto configuration demo](https://img.youtube.com/vi/hmukAmG5Eec/0.jpg)](https://www.youtube.com/watch?v=hmukAmG5Eec)
 
 CanAirIO sensorlib auto configuration demo on [Youtube](https://www.youtube.com/watch?v=hmukAmG5Eec)
 
----
 
-## Examples
+# Wiring
+
+The current version of library supports 3 kinds of wiring connection, UART, i2c and TwoWire, in the main boards the library using the defaults pins of each board, but in some special cases the pins are:
+
+### UART
+
+The library has [pre-defined some UART pin configs](https://github.com/kike-canaries/canairio_sensorlib/blob/master/src/Sensors.hpp#L19-L52), these are selected on compiling time. Maybe you don't need change anything with your board.  
+
+Also you can define the UART pins in the init() method, please see below.  
+
+#### Custom UART RX/TX:
+
+You can pass the custom pins if it isn't autodected:
+
+```cpp
+sensors.init(sensors.Auto,RX,TX); // custom RX, custom TX pines.
+```
+
+### I2C (recommended)
+
+We are using the default pins for each board, some times it's pins are 21,22, please check your board schematic.
+
+### TwoWire (deprecated soon)
+
+For now we are using it only for DHT sensors in PIN 23. For more info please review the next lines [here](https://github.com/kike-canaries/canairio_sensorlib/blob/master/src/Sensors.hpp#L19-L52).
+
+
+# Examples
 
 ### PlatformIO (recommended)
 
@@ -146,50 +198,26 @@ arduino-cli upload --fqbn esp32:esp32:lolin32:UploadSpeed=115200 -p /dev/ttyUSB0
 
 where `basic` is the basic example on examples directory.
 
-## Wiring
-
-The current version of library supports 3 kinds of wiring connection, UART, i2c and TwoWire, in the main boards the library using the defaults pins of each board, but in some special cases the pins are:
-
-### UART
-
-```cpp
-#ifdef WEMOSOLED
-#define PMS_RX 13  // config for Wemos board & TTGO18650
-#define PMS_TX 15  // some old TTGO18650 have PMS_RX 18 & PMS_TX 17
-#elif HELTEC
-#define PMS_RX 17  // config for Heltec board, ESP32Sboard & ESPDUINO-32
-#define PMS_TX 18  // some old ESP32Sboard have PMS_RX 27 & PMS_TX 25
-#elif TTGO_TQ
-#define PMS_RX 13  // config for TTGO_TQ board
-#define PMS_TX 18
-#else
-#define PMS_RX 17  // config for D1MIN1 board (Default for main ESP32 dev boards)
-#define PMS_TX 16
-#endif
-```
-Also you can define the UART pins in the init() method, please see below.  
-
-#### Custom UART RX/TX:
-
-You can pass the custom pins if it isn't autodected:
-
-```cpp
-sensors.init(sensors.Auto,RX,TX); // custom RX, custom TX pines.
-```
-
+# TODO
 
+- [x] Auto detection for UART sensors (Honeywell, Panasonic and Plantower)
+- [x] Added SPS30 library with auto UART detection
+- [x] Disable/enable logs (debug mode flag)
+- [x] Added bme280, aht10, sht31, am2320 i2c sensors
+- [x] Exposed public sub-libraries objects, sps30, aht10, etc.
+- [x] Added old DHT sensors 
+- [x] Added CO2 sensors: MHZ19, SCD30, CM1106 via UART
+- [x] Added SDS011 particle metter
+- [x] BME680 support (from TTGO-T7 CanAirIO version)
+- [x] Added Sensirion SPS30 and Panasonic SN-GCJA5 via i2c
+- [x] Enable/Disable UART detection for force only i2c
+- [ ] IAQ indicator from BME680 Bosch library
 
-### i2c (recommended)
 
-We are using the default pins for each board, some times it's pins are 21,22, please check your board schematic.
 
-### TwoWire
 
-For now we are using it only for DHT sensors in PIN 23. For more info please review the next lines [here](https://github.com/kike-canaries/canairio_sensorlib/blob/01ae9e976aa2985bb66856c0d6fae2a03100f552/src/Sensors.hpp#L16-L45).
+# Credits
 
+Thanks to all collaborators and [CanAirIO](https://canair.io) community for testing and reports.
 
 ---
-
-## Credits
-
-Thanks to all collaborators and [CanAirIO](https://canair.io) community for testing and reports.

examples/advanced_sensirion/sensirion.ino

@@ -45,7 +45,8 @@ void setup() {
     sensors.setOnErrorCallBack(&onSensorDataError); // [optional] error callback
     sensors.setDebugMode(true);                     // [optional] debug mode
 
-    sensors.init(sensors.Sensirion);
+    sensors.init(sensors.Sensirion);                // forced Sensirion via UART.
+                                                    // for i2c only leave empty this parameter
 
     if(sensors.isPmSensorConfigured())
         Serial.println("-->[SETUP] Sensor configured: " + sensors.getPmDeviceSelected());

examples/basic/basic.ino

@@ -35,13 +35,17 @@ void setup() {
     sensors.setOnErrorCallBack(&onSensorDataError); // [optional] error callback
     sensors.setDebugMode(false);                    // [optional] debug mode
 
-    // sensors.init();                              // Auto detection of PM sensors (Honeywell, Plantower)
-    // sensors.init(sensors.Auto);                  // Auto detection of PM sensors (Honeywell, Plantower)
+    // sensors.init();                              // Auto detection of PM sensors (Honeywell, Plantower, Panasonic)
+    // sensors.init(sensors.Auto);                  // Auto detection of PM sensors (Honeywell, Plantower, Panasonic)
     // sensors.init(sensors.Panasonic);             // Force detection to Panasonic sensor
     // sensors.init(sensors.Sensirion);             // Force detection to Sensirion sensor
+    // sensors.init(sensors.Mhz19);                 // Force detection to Mhz14 or Mhz19 CO2 sensor
+    // sensors.init(sensors.SDS011);                // Force detection to SDS011 sensor
+    // sensors.init(sensors.CM1006);                // Force detection to CM1106 CO2 sensor
     // sensors.init(sensors.Auto,mRX,mTX);          // Auto detection and custom RX, TX pines
+    // sensors.init(sensors.Auto,PMS_RX,PMS_TX);    // Auto detection, custom RX,TX and custom DHT config
 
-    sensors.init(sensors.Sensirion);                // Force detection to Sensirion sensor
+    sensors.init();                                 // Force detection to Sensirion sensor
 
     if(sensors.isPmSensorConfigured())
         Serial.println("-->[SETUP] Sensor configured: " + sensors.getPmDeviceSelected());

examples/basic_esp8266/basic_esp8266.ino

@@ -43,13 +43,17 @@ void setup() {
     sensors.setSampleTime(5);                       // config sensors sample time interval
     sensors.setOnDataCallBack(&onSensorDataOk);     // all data read callback
     sensors.setOnErrorCallBack(&onSensorDataError); // [optional] error callback
-    sensors.setDebugMode(true);                    // [optional] debug mode
+    sensors.setDebugMode(true);                     // [optional] debug mode
 
     // sensors.init();                              // Auto detection of PM sensors (Honeywell, Plantower, Panasonic)
     // sensors.init(sensors.Auto);                  // Auto detection of PM sensors (Honeywell, Plantower, Panasonic)
     // sensors.init(sensors.Panasonic);             // Force detection to Panasonic sensor
     // sensors.init(sensors.Sensirion);             // Force detection to Sensirion sensor
+    // sensors.init(sensors.Mhz19);                 // Force detection to Mhz14 or Mhz19 CO2 sensor
+    // sensors.init(sensors.SDS011);                // Force detection to SDS011 sensor
+    // sensors.init(sensors.CM1006);                // Force detection to CM1106 CO2 sensor
     // sensors.init(sensors.Auto,mRX,mTX);          // Auto detection and custom RX, TX pines
+    // sensors.init(sensors.Auto,PMS_RX,PMS_TX);    // Auto detection, custom RX,TX and custom DHT config
 
     sensors.init(sensors.Panasonic, 5, 6);          // Panasonic sensor with ESP8266 software serial pines
 

examples/co2_cm1106/co2_cm1106.ino

@@ -47,14 +47,8 @@ void setup() {
     sensors.setOnErrorCallBack(&onSensorDataError);  // [optional] error callback
     sensors.setDebugMode(true);                      // [optional] debug mode
 
-    // sensors.init();                                    // Auto detection of PM sensors (Honeywell, Plantower, Panasonic)
-    // sensors.init(sensors.Auto);                        // Auto detection of PM sensors (Honeywell, Plantower, Panasonic)
-    // sensors.init(sensors.Panasonic);                   // Force detection to Panasonic sensor
-    // sensors.init(sensors.Sensirion);                   // Force detection to Sensirion sensor
-    // sensors.init(sensors.Mhz19);                       // Force detection to Mhz14 or Mhz19 CO2 sensor
-    // sensors.init(sensors.CM1006);                      // Force detection to CM1106 CO2 sensor
-    // sensors.init(sensors.Auto,mRX,mTX);                // Auto detection and custom RX, TX pines
-    // sensors.init(sensors.Auto,PMS_RX,PMS_TX); // Auto detection, custom RX,TX and custom DHT config
+    // sensors.setCO2RecalibrationFactor(400);       // calibration method (in outdoors)
+
     sensors.init(sensors.CM1106);
 
     if (sensors.isPmSensorConfigured())

examples/co2_mhz19/co2_mhz19.ino

@@ -49,12 +49,8 @@ void setup() {
     sensors.setOnErrorCallBack(&onSensorDataError);  // [optional] error callback
     sensors.setDebugMode(true);                      // [optional] debug mode
 
-    // sensors.init();                                    // Auto detection of PM sensors (Honeywell, Plantower, Panasonic)
-    // sensors.init(sensors.Auto);                        // Auto detection of PM sensors (Honeywell, Plantower, Panasonic)
-    // sensors.init(sensors.Panasonic);                   // Force detection to Panasonic sensor
-    // sensors.init(sensors.Sensirion);                   // Force detection to Sensirion sensor
-    // sensors.init(sensors.Auto,mRX,mTX);                // Auto detection and custom RX, TX pines
-    // sensors.init(sensors.Auto,PMS_RX,PMS_TX); // Auto detection, custom RX,TX and custom DHT config
+    // sensors.setCO2RecalibrationFactor(400);       // calibration method (in outdoors)
+
     sensors.init(sensors.Mhz19);
 
     if (sensors.isPmSensorConfigured())

examples/co2_scd30/co2_scd30.ino

@@ -19,11 +19,7 @@
 #include <Sensors.hpp>
 
 void onSensorDataOk() {
-    Serial.print("-->[MAIN] PM1: " + sensors.getStringPM1());
-    Serial.print(" PM2.5: " + sensors.getStringPM25());
-    Serial.print(" PM10: " + sensors.getStringPM10());
-
-    Serial.print(" CO2: " + sensors.getStringCO2());
+    Serial.print("-->[MAIN] CO2: " + sensors.getStringCO2());
     Serial.print(" CO2humi: " + String(sensors.getCO2humi()));
     Serial.print(" CO2temp: " + String(sensors.getCO2temp()));
 
@@ -49,17 +45,14 @@ void setup() {
     sensors.setSampleTime(5);                        // config sensors sample time interval
     sensors.setOnDataCallBack(&onSensorDataOk);      // all data read callback
     sensors.setOnErrorCallBack(&onSensorDataError);  // [optional] error callback
-    sensors.setDebugMode(true);                      // [optional] debug mode
+    sensors.setDebugMode(false);                     // [optional] debug mode
+    sensors.detectI2COnly(true);                     // force to only i2c sensors
+
+    // sensors.setCO2RecalibrationFactor(400);       // calibration method (in outdoors)
+
+    sensors.scd30.setTemperatureOffset(2.0);         // example to set temp offset
 
-    // sensors.init();                                    // Auto detection of PM sensors (Honeywell, Plantower, Panasonic)
-    // sensors.init(sensors.Auto);                        // Auto detection of PM sensors (Honeywell, Plantower, Panasonic)
-    // sensors.init(sensors.Panasonic);                   // Force detection to Panasonic sensor
-    // sensors.init(sensors.Sensirion);                   // Force detection to Sensirion sensor
-    // sensors.init(sensors.Mhz19);                       // Force detection to Mhz14 or Mhz19 CO2 sensor
-    // sensors.init(sensors.CM1006);                      // Force detection to CM1106 CO2 sensor
-    // sensors.init(sensors.Auto,mRX,mTX);                // Auto detection and custom RX, TX pines
-    // sensors.init(sensors.Auto,PMS_RX,PMS_TX); // Auto detection, custom RX,TX and custom DHT config
-    sensors.init(sensors.Auto);
+    sensors.init();
 
     if (sensors.isPmSensorConfigured())
         Serial.println("-->[SETUP] Sensor configured: " + sensors.getPmDeviceSelected());

examples/platformio/src/main.cpp

@@ -51,17 +51,19 @@ void setup() {
     sensors.setOnDataCallBack(&onSensorDataOk);     // all data read callback
     sensors.setOnErrorCallBack(&onSensorDataError); // [optional] error callback
     sensors.setDebugMode(true);                     // [optional] debug mode
+    sensors.detectI2COnly(false);                   // disable force to only i2c sensors
 
-    // sensors.init();                                    // Auto detection of PM sensors (Honeywell, Plantower, Panasonic)
-    // sensors.init(sensors.Auto);                        // Auto detection of PM sensors (Honeywell, Plantower, Panasonic)
-    // sensors.init(sensors.Panasonic);                   // Force detection to Panasonic sensor
-    // sensors.init(sensors.Sensirion);                   // Force detection to Sensirion sensor
-    // sensors.init(sensors.SDS011);                      // Force detection to Nova sensor
-    // sensors.init(sensors.Mhz19);                       // Force detection to Mhz14 or Mhz19 CO2 sensor 
-    // sensors.init(sensors.CM1006);                      // Force detection to CM1106 CO2 sensor
-    // sensors.init(sensors.Auto,mRX,mTX);                // Auto detection and custom RX, TX pines
-    // sensors.init(sensors.Auto,PMS_RX,PMS_TX); // Auto detection, custom RX,TX and custom DHT config
-    sensors.init(sensors.Auto); 
+    // sensors.init();                              // Auto detection of PM sensors (Honeywell, Plantower, Panasonic)
+    // sensors.init(sensors.Auto);                  // Auto detection of PM sensors (Honeywell, Plantower, Panasonic)
+    // sensors.init(sensors.Panasonic);             // Force detection to Panasonic sensor
+    // sensors.init(sensors.Sensirion);             // Force detection to Sensirion sensor
+    // sensors.init(sensors.Mhz19);                 // Force detection to Mhz14 or Mhz19 CO2 sensor
+    // sensors.init(sensors.SDS011);                // Force detection to SDS011 sensor
+    // sensors.init(sensors.CM1006);                // Force detection to CM1106 CO2 sensor
+    // sensors.init(sensors.Auto,mRX,mTX);          // Auto detection and custom RX, TX pines
+    // sensors.init(sensors.Auto,PMS_RX,PMS_TX);    // Auto detection, custom RX,TX and custom DHT config
+
+    sensors.init(); 
 
     if(sensors.isPmSensorConfigured())
         Serial.println("-->[SETUP] Sensor configured: " + sensors.getPmDeviceSelected());

examples/pm_sds011/pm_sds011.ino

@@ -51,16 +51,6 @@ void setup() {
     sensors.setOnErrorCallBack(&onSensorDataError);  // [optional] error callback
     sensors.setDebugMode(true);                      // [optional] debug mode
 
-    // sensors.init();                                    // Auto detection of PM sensors (Honeywell, Plantower, Panasonic)
-    // sensors.init(sensors.Auto);                        // Auto detection of PM sensors (Honeywell, Plantower, Panasonic)
-    // sensors.init(sensors.Panasonic);                   // Force detection to Panasonic sensor
-    // sensors.init(sensors.Sensirion);                   // Force detection to Sensirion sensor
-    // sensors.init(sensors.SDS011);                      // Force detection to Nova sensor
-    // sensors.init(sensors.Mhz19);                       // Force detection to Mhz14 or Mhz19 CO2 sensor
-    // sensors.init(sensors.CM1006);                      // Force detection to CM1106 CO2 sensor
-    // sensors.init(sensors.SCD30co2);                    // Force detection to SCD30 CO2 sensor
-    // sensors.init(sensors.Auto,mRX,mTX);                // Auto detection and custom RX, TX pines
-    // sensors.init(sensors.Auto,PMS_RX,PMS_TX); // Auto detection, custom RX,TX and custom DHT config
     sensors.init(sensors.SDS011);
 
     if (sensors.isPmSensorConfigured())

examples/sps30i2c/sps30i2c.cpp

@@ -61,7 +61,5 @@ void setup() {
 uint64_t counter = 0;
 
 void loop() {
-
     sensors.loop();  // read sensor data and showed it
-
 }