calico: update config and rename files

This commit updates Calico to the version 3.16.4. Renames the file `daemonset.yaml` to correctly reflect the resource it contains i.e `calico-node.yaml` Renames the file `deployment.yaml` to correctly reflect the resource it contains i.e `calico-kube-controllers.yaml` Updates the calico config. Signed-off-by: Imran Pochi <[email protected]>
kinvolk · Oct 22, 2020 · 2472d1f · 2472d1f
1 parent 2b07f91
commit 2472d1f
Show file tree

Hide file tree

Showing 4 changed files with 40 additions and 17 deletions.
diff --git a/...ol-plane/calico/templates/deployment.yaml → ...co/templates/calico-kube-controllers.yaml b/...ol-plane/calico/templates/deployment.yaml → ...co/templates/calico-kube-controllers.yaml
@@ -40,10 +40,6 @@ spec:
               value: node
             - name: DATASTORE_TYPE
               value: kubernetes
-            # This is disabled until the HostEndpoints created by this controller are better
-            # parameterised. See https://github.com/projectcalico/calico/issues/3566.
-            # - name: AUTO_HOST_ENDPOINTS
-            #   value: "enabled"
           readinessProbe:
             exec:
               command:

diff --git a/...rol-plane/calico/templates/daemonset.yaml → ...l-plane/calico/templates/calico-node.yaml b/...rol-plane/calico/templates/daemonset.yaml → ...l-plane/calico/templates/calico-node.yaml
@@ -48,6 +48,11 @@ spec:
         - name: upgrade-ipam
           image: {{ .Values.calico.cniImage }}
           command: ["/opt/cni/bin/calico-ipam", "-upgrade"]
+          envFrom:
+          - configMapRef:
+              # Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode.
+              name: kubernetes-services-endpoint
+              optional: true
           env:
             - name: KUBERNETES_NODE_NAME
               valueFrom:
@@ -69,7 +74,12 @@ spec:
         # and CNI network config file on each node.
         - name: install-cni
           image: {{ .Values.calico.cniImage }}
-          command: ["/install-cni.sh"]
+          command: ["/opt/cni/bin/install"]
+          envFrom:
+          - configMapRef:
+              # Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode.
+              name: kubernetes-services-endpoint
+              optional: true
           env:
             # Name of the CNI config file to create.
             - name: CNI_CONF_NAME
@@ -116,6 +126,11 @@ spec:
         # host.
         - name: calico-node
           image: {{ .Values.calico.image }}
+          envFrom:
+          - configMapRef:
+              # Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode.
+              name: kubernetes-services-endpoint
+              optional: true
           env:
             # Use Kubernetes API as the backing datastore.
             - name: DATASTORE_TYPE
@@ -168,17 +183,17 @@ spec:
                 configMapKeyRef:
                   name: calico-config
                   key: veth_mtu
-            # The default IPv4 pool to create on startup if none exists. Pod IPs will be
-            # chosen from this range. Changing this value after installation will have
-            # no effect. This should fall within `--cluster-cidr`.
-            # - name: CALICO_IPV4POOL_CIDR
-            #   value: "192.168.0.0/16"
             # Set MTU for the Wireguard tunnel device.
             - name: FELIX_WIREGUARDMTU
               valueFrom:
                 configMapKeyRef:
                   name: calico-config
                   key: veth_mtu
+            # The default IPv4 pool to create on startup if none exists. Pod IPs will be
+            # chosen from this range. Changing this value after installation will have
+            # no effect. This should fall within `--cluster-cidr`.
+            # - name: CALICO_IPV4POOL_CIDR
+            #   value: "192.168.0.0/16"
             # Disable file logging so `kubectl logs` works.
             - name: CALICO_DISABLE_FILE_LOGGING
               value: "true"
@@ -239,6 +254,13 @@ spec:
               readOnly: false
             - name: policysync
               mountPath: /var/run/nodeagent
+            # For eBPF mode, we need to be able to mount the BPF filesystem at /sys/fs/bpf so we mount in the
+            # parent directory.
+            - name: sysfs
+              mountPath: /sys/fs/
+              # Bidirectional means that, if we mount the BPF filesystem at /sys/fs/bpf it will propagate to the host.
+              # If the host is known to mount that filesystem already then Bidirectional can be omitted.
+              mountPropagation: Bidirectional
       volumes:
         # Used by calico-node.
         - name: lib-modules
@@ -254,6 +276,10 @@ spec:
           hostPath:
             path: /run/xtables.lock
             type: FileOrCreate
+        - name: sysfs
+          hostPath:
+            path: /sys/fs/
+            type: DirectoryOrCreate
         # Used to install CNI.
         - name: cni-bin-dir
           hostPath:

diff --git a/assets/charts/control-plane/calico/templates/config.yaml b/assets/charts/control-plane/calico/templates/config.yaml
@@ -28,17 +28,18 @@ data:
         {
           "type": "calico",
           "log_level": "info",
+          "log_file_path": "/var/log/calico/cni/cni.log",
           "datastore_type": "kubernetes",
           "nodename": "__KUBERNETES_NODE_NAME__",
           "mtu": __CNI_MTU__,
           "ipam": {
-            "type": "calico-ipam"
+              "type": "calico-ipam"
           },
           "policy": {
-            "type": "k8s"
+              "type": "k8s"
           },
           "kubernetes": {
-            "kubeconfig": "__KUBECONFIG_FILEPATH__"
+              "kubeconfig": "__KUBECONFIG_FILEPATH__"
           }
         },
         {

diff --git a/assets/charts/control-plane/calico/values.yaml b/assets/charts/control-plane/calico/values.yaml
@@ -1,9 +1,9 @@
 calico:
   networkMTU: 1500
-  image: calico/node:v3.15.2
-  cniImage: calico/cni:v3.15.2
-  controllersImage: calico/kube-controllers:v3.15.2
-  flexvolDriverImage: calico/pod2daemon-flexvol:v3.15.2
+  image: calico/node:v3.16.4
+  cniImage: calico/cni:v3.16.4
+  controllersImage: calico/kube-controllers:v3.16.4
+  flexvolDriverImage: calico/pod2daemon-flexvol:v3.16.4
   enableReporting: false
   networkIpAutodetectionMethod: first-found
   ipipEnabled: true